A3COM-HUAWEI-ACL-MIB
351 objects
ACL management information base for managing devices that support access control list and packet filtering.
Imported Objects
| A3COM-HUAWEI-OID-MIB | h3cCommon |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType |
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.45.1.10.2.8 | Identityh3cAcl | ACL management information base for managing devices that support access control list and packet filtering. | ||
| 1.3.6.1.4.1.43.45.1.10.2.8.1 | Nodeh3cAclMibObjects | |||
| 1.3.6.1.4.1.43.45.1.10.2.8.1.1 | Scalarh3cAclMode | read-write | current | Access-list mode. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.2 | Tableh3cAclNumGroupTable | not-accessible | current | Configure the match-order of number-acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.2.1 | Rowh3cAclNumGroupEntry | not-accessible | current | Define the index of h3cAclNumGroupTable. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.2.1.1 | Columnh3cAclNumGroupAclNum | not-accessible | current | The index of number-acl group Interface type:1000..1999 Basic type:2000..2999 Advance type:3000..3999 Link type:4000..4999 User type:5000..5999 |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.2.1.2 | Columnh3cAclNumGroupMatchOrder | read-create | current | The match-order of number-acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.2.1.3 | Columnh3cAclNumGroupSubitemNum | read-only | current | The number of number-acl group's node. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.2.1.4 | Columnh3cAclNumGroupDescription | read-write | current | The description of this acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.2.1.5 | Columnh3cAclNumGroupCountClear | read-create | current | Reset the value of rules' counter, which belong to this group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.2.1.6 | Columnh3cAclNumGroupRowStatus | read-create | current | RowStatus, now support three state: CreateAndGo, Active, Destroy. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.3 | Tableh3cAclNameGroupTable | not-accessible | current | Create acl-group that identified by name. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.3.1 | Rowh3cAclNameGroupEntry | not-accessible | current | Define the index of h3cAclNameGroupTable. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.3.1.1 | Columnh3cAclNameGroupIndex | not-accessible | current | The index of name-acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.3.1.2 | Columnh3cAclNameGroupCreateName | read-create | current | The name of name-acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.3.1.3 | Columnh3cAclNameGroupTypes | read-create | current | The type of name-acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.3.1.4 | Columnh3cAclNameGroupMatchOrder | read-create | current | The match-order of name-acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.3.1.5 | Columnh3cAclNameGroupSubitemNum | read-only | current | The number of name-acl group's node. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.3.1.6 | Columnh3cAclNameGroupRowStatus | read-create | current | RowStatus, now support three state: CreateAndGo, Active, Destroy. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.4 | Tableh3cAclBasicRuleTable | not-accessible | current | Configure the rule for basic acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.4.1 | Rowh3cAclBasicRuleEntry | not-accessible | current | Define the index of h3cAclBasicRuleTable. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.4.1.1 | Columnh3cAclBasicAclNum | not-accessible | current | The index of basic acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.4.1.2 | Columnh3cAclBasicSubitem | not-accessible | current | The subindex of basic acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.4.1.3 | Columnh3cAclBasicAct | read-create | current | The action of basic acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.4.1.4 | Columnh3cAclBasicSrcIp | read-create | current | Source IP-address of basic acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.4.1.5 | Columnh3cAclBasicSrcWild | read-create | current | Source IP-address wild of basic acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.4.1.6 | Columnh3cAclBasicTimeRangeName | read-create | current | The Time-range of basic acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.4.1.7 | Columnh3cAclBasicFragments | read-create | current | The flag of matching fragmented packet. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.4.1.8 | Columnh3cAclBasicLog | read-create | current | The flag of log. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.4.1.9 | Columnh3cAclBasicEnable | read-only | current | The rule is active or not. true : active false : inactive |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.4.1.10 | Columnh3cAclBasicCount | read-only | current | The count of matched by basic rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.4.1.11 | Columnh3cAclBasicCountClear | read-create | current | Reset the value of counter. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.4.1.12 | Columnh3cAclBasicRowStatus | read-create | current | RowStatus, now support three state: CreateAndGo, Active, Destroy. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5 | Tableh3cAclAdvancedRuleTable | not-accessible | current | Configure the rule for advanced acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1 | Rowh3cAclAdvancedRuleEntry | not-accessible | current | Define the index of h3cAclAdvancedRuleTable. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1.1 | Columnh3cAclAdvancedAclNum | not-accessible | current | The index of advanced acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1.2 | Columnh3cAclAdvancedSubitem | not-accessible | current | The subindex of advanced acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1.3 | Columnh3cAclAdvancedAct | read-create | current | The action of Advance acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1.4 | Columnh3cAclAdvancedProtocol | read-create | current | The protocol-type of advanced acl group. <1-255> Protocol number gre GRE tunneling(47) icmp Internet Control Message Protocol(1) igmp Internet Group Management… |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1.5 | Columnh3cAclAdvancedSrcIp | read-create | current | Source IP-address of advanced acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1.6 | Columnh3cAclAdvancedSrcWild | read-create | current | Source IP-address wild of advanced acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1.7 | Columnh3cAclAdvancedSrcOp | read-create | current | The source IP-address's operator of advanced acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1.8 | Columnh3cAclAdvancedSrcPort1 | read-create | current | The fourth layer source port1. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1.9 | Columnh3cAclAdvancedSrcPort2 | read-create | current | The fourth layer source port2. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1.10 | Columnh3cAclAdvancedDestIp | read-create | current | Destination IP-address of advanced acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1.11 | Columnh3cAclAdvancedDestWild | read-create | current | Destination IP-address wild of advanced acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1.12 | Columnh3cAclAdvancedDestOp | read-create | current | The destination IP-address's operator of advanced acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1.13 | Columnh3cAclAdvancedDestPort1 | read-create | current | The fourth layer destination port1. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1.14 | Columnh3cAclAdvancedDestPort2 | read-create | current | The fourth layer destination port2. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1.15 | Columnh3cAclAdvancedPrecedence | read-create | current | The value of IP-packet's precedence. <0-7> Value of precedence routine Specify routine precedence(0) priority Specify priority precedence(1) immediate Specify … |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1.16 | Columnh3cAclAdvancedTos | read-create | current | The value of IP-packet's TOS. <0-15> Value of TOS(type of service) max-reliability Match packets with max reliable TOS(2) max-throughput Match packets with max… |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1.17 | Columnh3cAclAdvancedDscp | read-create | current | The value of DSCP. <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forw… |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1.18 | Columnh3cAclAdvancedEstablish | read-create | current | Establish flag. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1.19 | Columnh3cAclAdvancedTimeRangeName | read-create | current | The Time-range of advanced acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1.20 | Columnh3cAclAdvancedIcmpType | read-create | current | The type of ICMP packet. Integer32 ICMP type echo Type=8, Code=0 echo-reply Type=0, Code=0 fragmentneed-DFset Type=3, Code=4 host-redirect Type=5, Code=1 host-… |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1.21 | Columnh3cAclAdvancedIcmpCode | read-create | current | The code of ICMP packet. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1.22 | Columnh3cAclAdvancedFragments | read-create | current | The flag of matching fragmented packet. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1.23 | Columnh3cAclAdvancedLog | read-create | current | The flag of log. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1.24 | Columnh3cAclAdvancedEnable | read-only | current | The rule is active or not. true : active false : inactive |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1.25 | Columnh3cAclAdvancedCount | read-only | current | The count of matched by advanced rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1.26 | Columnh3cAclAdvancedCountClear | read-create | current | Reset the value of counter. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.5.1.27 | Columnh3cAclAdvancedRowStatus | read-create | current | RowStatus, now support three state: CreateAndGo, Active, Destroy. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.6 | Tableh3cAclIfRuleTable | not-accessible | current | Configure the rule for interface-based acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.6.1 | Rowh3cAclIfRuleEntry | not-accessible | current | Define the index of h3cAclIfRuleTable. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.6.1.1 | Columnh3cAclIfAclNum | not-accessible | current | The index of interface-based acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.6.1.2 | Columnh3cAclIfSubitem | not-accessible | current | The subindex of interface-based acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.6.1.3 | Columnh3cAclIfAct | read-create | current | The action of interface-based acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.6.1.4 | Columnh3cAclIfIndex | read-create | current | The index of interface. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.6.1.5 | Columnh3cAclIfAny | read-create | current | The flag of matching any interface. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.6.1.6 | Columnh3cAclIfTimeRangeName | read-create | current | The Time-range of interface-based acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.6.1.7 | Columnh3cAclIfLog | read-create | current | The flag of log. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.6.1.8 | Columnh3cAclIfEnable | read-only | current | The rule is active or not. true : active false : inactive |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.6.1.9 | Columnh3cAclIfCount | read-only | current | The count of matched by basic rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.6.1.10 | Columnh3cAclIfCountClear | read-create | current | Reset the value of the rule's counter. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.6.1.11 | Columnh3cAclIfRowStatus | read-create | current | RowStatus, now support three state: CreateAndGo, Active, Destroy. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7 | Tableh3cAclLinkTable | not-accessible | current | Create link acl. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1 | Rowh3cAclLinkEntry | not-accessible | current | The entry of the link acl table. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.1 | Columnh3cAclLinkAclNum | not-accessible | current | The index of link-based acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.2 | Columnh3cAclLinkSubitem | not-accessible | current | The subindex of link-based acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.3 | Columnh3cAclLinkAct | read-create | current | The action of link-based acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.4 | Columnh3cAclLinkProtocol | read-create | current | The layer 2 protocol-type of link acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.5 | Columnh3cAclLinkFormatType | read-create | current | Format type of link acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.6 | Columnh3cAclLinkVlanTag | read-create | current | The flag of vlan tag of link acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.7 | Columnh3cAclLinkVlanPri | read-create | current | Vlan priority of link acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.8 | Columnh3cAclLinkSrcVlanId | read-create | current | Source vlan ID of link acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.9 | Columnh3cAclLinkSrcMac | read-create | current | Source mac of link acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.10 | Columnh3cAclLinkSrcMacWild | read-create | current | Source mac wildzard of link acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.11 | Columnh3cAclLinkSrcIfIndex | read-create | current | Source IfIndex of link acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.12 | Columnh3cAclLinkSrcAny | read-create | current | The flag of matching any source. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.13 | Columnh3cAclLinkDestVlanId | read-create | current | Destination vlan ID of link acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.14 | Columnh3cAclLinkDestMac | read-create | current | Destination mac of link acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.15 | Columnh3cAclLinkDestMacWild | read-create | current | Destination mac wildzard of link acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.16 | Columnh3cAclLinkDestIfIndex | read-create | current | Destination IfIndex of link acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.17 | Columnh3cAclLinkDestAny | read-create | current | The flag of matching any destination. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.18 | Columnh3cAclLinkTimeRangeName | read-create | current | The Time-range of link-based acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.19 | Columnh3cAclLinkEnable | read-only | current | The rule is active or not. true : active false : inactive |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.20 | Columnh3cAclLinkRowStatus | read-create | current | RowStatus, now support three state: CreateAndGo, Active, Destroy. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.21 | Columnh3cAclLinkTypeCode | read-create | current | The type of layer 2 protocol.0x0000...0xffff. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.22 | Columnh3cAclLinkTypeMask | read-create | current | The mask of layer 2 protocol.0x0000...0xffff. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.23 | Columnh3cAclLinkLsapCode | read-create | current | The type of LSAP.0x0000...0xffff. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.24 | Columnh3cAclLinkLsapMask | read-create | current | The mask of LSAP.0x0000...0xffff. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.25 | Columnh3cAclLinkL2LabelRangeOp | read-create | current | Operation symbol of the MPLS label. If the symbol is range(5), the objects h3cAclLinkL2LabelRangeBegin and h3cAclLinkL2LabelRangeEnd should have different valu… |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.26 | Columnh3cAclLinkL2LabelRangeBegin | read-create | current | The beginning of VPLS VC label. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.27 | Columnh3cAclLinkL2LabelRangeEnd | read-create | current | The end of VPLS VC label. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.7.1.28 | Columnh3cAclLinkMplsExp | read-create | current | The value of MPLS-packet's Exp. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.8 | Tableh3cAclUserTable | not-accessible | current | Create user acl. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.8.1 | Rowh3cAclUserEntry | not-accessible | current | The entry of user acl table. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.8.1.1 | Columnh3cAclUserAclNum | not-accessible | current | The number of the user acl. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.8.1.2 | Columnh3cAclUserSubitem | not-accessible | current | The subitem of the user acl. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.8.1.3 | Columnh3cAclUserAct | read-create | current | The action of the user acl. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.8.1.4 | Columnh3cAclUserFormatType | read-create | current | Format type. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.8.1.5 | Columnh3cAclUserVlanTag | read-create | current | Vlan tag exits or not. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.8.1.6 | Columnh3cAclUserRuleStr | read-create | current | Rule string. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.8.1.7 | Columnh3cAclUserRuleMask | read-create | current | Rule mask. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.8.1.8 | Columnh3cAclUserTimeRangeName | read-create | current | The Time-range of the user defined acl. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.8.1.9 | Columnh3cAclUserEnable | read-only | current | The rule is active or not. true : active false : inactive |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.8.1.10 | Columnh3cAclUserRowStatus | read-create | current | RowStatus, now support three state: CreateAndGo, Active, Destroy. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.9 | Tableh3cAclActiveTable | not-accessible | current | Active acl. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.9.1 | Rowh3cAclActiveEntry | not-accessible | current | The entry of active acl table. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.9.1.1 | Columnh3cAclActiveAclIndex | not-accessible | current | Acl index. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.9.1.2 | Columnh3cAclActiveIfIndex | not-accessible | current | IfIndex. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.9.1.3 | Columnh3cAclActiveVlanID | not-accessible | current | The lower 16 bits is Vlan ID, the higher 16 bits, if not zero, it describes the slot ID of the L3plus board. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.9.1.4 | Columnh3cAclActiveDirection | not-accessible | current | Direction. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.9.1.5 | Columnh3cAclActiveUserAclNum | read-create | current | The number of the user acl. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.9.1.6 | Columnh3cAclActiveUserAclSubitem | read-create | current | The subitem of the user acl. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.9.1.7 | Columnh3cAclActiveIpAclNum | read-create | current | The number of the IP acl. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.9.1.8 | Columnh3cAclActiveIpAclSubitem | read-create | current | The subitem of the IP acl. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.9.1.9 | Columnh3cAclActiveLinkAclNum | read-create | current | The num of the link acl. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.9.1.10 | Columnh3cAclActiveLinkAclSubitem | read-create | current | The subitem of the link acl. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.9.1.11 | Columnh3cAclActiveRuntime | read-only | current | Is run or not. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.9.1.12 | Columnh3cAclActiveRowStatus | read-create | current | RowStatus, now support three state: CreateAndGo, Active, Destroy. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.10 | Tableh3cAclIDSTable | not-accessible | current | Configure the rule for IDS. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.10.1 | Rowh3cAclIDSEntry | not-accessible | current | The entry of acl ids table. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.10.1.1 | Columnh3cAclIDSName | not-accessible | current | The name index of the IDS table. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.10.1.2 | Columnh3cAclIDSSrcMac | read-create | current | Source mac of IDS acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.10.1.3 | Columnh3cAclIDSDestMac | read-create | current | Destination mac of IDS acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.10.1.4 | Columnh3cAclIDSSrcIp | read-create | current | Source IP-address of IDS acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.10.1.5 | Columnh3cAclIDSSrcWild | read-create | current | Source IP-address wild of IDS acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.10.1.6 | Columnh3cAclIDSDestIp | read-create | current | Destination IP-address of IDS acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.10.1.7 | Columnh3cAclIDSDestWild | read-create | current | Destination IP-address wild of IDS acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.10.1.8 | Columnh3cAclIDSSrcPort | read-create | current | The fourth layer source port. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.10.1.9 | Columnh3cAclIDSDestPort | read-create | current | The fourth layer destination port. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.10.1.10 | Columnh3cAclIDSProtocol | read-create | current | The protocol-type of advanced acl group. <1-255> Protocol number gre GRE tunneling(47) icmp Internet Control Message Protocol(1) igmp Internet Group Management… |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.10.1.11 | Columnh3cAclIDSDenyTime | read-create | current | The maximum number of seconds which deny for this acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.10.1.12 | Columnh3cAclIDSAct | read-create | current | The action of IDS acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.1.10.1.13 | Columnh3cAclIDSRowStatus | read-create | current | RowStatus, now supports three states: CreateAndGo, Active, and Destroy. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2 | Nodeh3cAclMib2Objects | |||
| 1.3.6.1.4.1.43.45.1.10.2.8.2.1 | Nodeh3cAclMib2GlobalGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.8.2.1.1 | Nodeh3cAclMib2NodesGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.8.2.1.1.1 | Scalarh3cAclMib2Mode | read-write | current | The applying mode of ACL. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.1.1.2 | Scalarh3cAclMib2Version | read-only | current | The version of this file. The output value has the format of 'xx'or 'xxx'. For example: 10 means 1.0; 125 means 12.5. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.1.1.3 | Scalarh3cAclMib2ObjectsCapabilities | read-only | current | The objects of h3cAclMib2Objects. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.1.1.4 | Scalarh3cAclMib2ProcessingStatus | read-only | current | The processing status of ACL operation. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.1.2 | Tableh3cAclMib2CapabilityTable | not-accessible | current | The capability of mib2. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.1.2.1 | Rowh3cAclMib2CapabilityEntry | not-accessible | current | The information of Capability of mib2. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.1.2.1.1 | Columnh3cAclMib2EntityType | not-accessible | current | The type of entity . system: The entity is systemic level. interface: The entity is interface level. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.1.2.1.2 | Columnh3cAclMib2EntityIndex | not-accessible | current | The index of entity. If h3cAclMib2EntityType is system, the value of this object is 0. If h3cAclMib2EntityType is interface, the value of this object is equal … |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.1.2.1.3 | Columnh3cAclMib2ModuleIndex | not-accessible | current | The module index of ACL. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.1.2.1.4 | Columnh3cAclMib2CharacteristicsIndex | not-accessible | current | The characteristics index of mib2. See DESCRIPTION of h3cAclMib2CharacteristicsValue to get detail information about the value of this object. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.1.2.1.5 | Columnh3cAclMib2CharacteristicsDesc | read-only | current | The description of characteristics. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.1.2.1.6 | Columnh3cAclMib2CharacteristicsValue | read-only | current | The value of capability of this object. TypeOfRuleStringValue : notSupport(0) and the length of RuleString. TypeOfCodeValue : OnlyOneNotSupport(0), MoreThanOne… |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.1.3 | Tableh3cAclNumberGroupTable | not-accessible | current | A table of the number acl group information. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.1.3.1 | Rowh3cAclNumberGroupEntry | not-accessible | current | Number acl group information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.1.3.1.1 | Columnh3cAclNumberGroupType | not-accessible | current | The type of number group. Basic ACL and Advanced ACL support ipv4 and ipv6. The range of Basic ACL is from 2000 to 2999. The range of Advanced ACL is from 3000… |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.1.3.1.2 | Columnh3cAclNumberGroupIndex | not-accessible | current | The group index of number acl. Basic type:2000..2999 Advanced type:3000..3999 MAC type:4000..4999 User type:5000..5999 Simple type:10000..42767 |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.1.3.1.3 | Columnh3cAclNumberGroupRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.1.3.1.4 | Columnh3cAclNumberGroupMatchOrder | read-create | current | The match-order of number acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.1.3.1.5 | Columnh3cAclNumberGroupStep | read-create | current | The step of rule index. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.1.3.1.6 | Columnh3cAclNumberGroupDescription | read-create | current | Description of this acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.1.3.1.7 | Columnh3cAclNumberGroupCountClear | read-write | current | Reset the value of counters of this group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.1.3.1.8 | Columnh3cAclNumberGroupRuleCounter | read-only | current | The rule count of number acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.1.3.1.9 | Columnh3cAclNumberGroupName | read-create | current | Name of this acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2 | Nodeh3cAclIPAclGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.2 | Tableh3cAclIPAclBasicTable | not-accessible | current | A table of basic rule group. If some objects of this table are not supported by some products, these objects can't be created, changed and applied. Default val… |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.2.1 | Rowh3cAclIPAclBasicEntry | not-accessible | current | Basic rule group information. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.2.1.1 | Columnh3cAclIPAclBasicRuleIndex | not-accessible | current | The rule index of basic acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.2.1.2 | Columnh3cAclIPAclBasicRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.2.1.3 | Columnh3cAclIPAclBasicAct | read-create | current | The action of basic acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.2.1.4 | Columnh3cAclIPAclBasicSrcAddrType | read-create | current | The IP addresses type of IP pool. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.2.1.5 | Columnh3cAclIPAclBasicSrcAddr | read-create | current | The value of a local IP address is available for this association. The type of this address is determined by the value of h3cAclIPAclBasicSrcAddrType. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.2.1.6 | Columnh3cAclIPAclBasicSrcPrefix | read-create | current | Denotes the length of a generic Internet network address prefix. A value of n corresponds to an IP address mask which has n contiguous 1-bits from the most sig… |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.2.1.7 | Columnh3cAclIPAclBasicSrcAny | read-create | current | The flag of matching any IP address. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.2.1.8 | Columnh3cAclIPAclBasicSrcWild | read-create | current | Source IPv4 address wild. Only IPv4 Basic Rule support this object. Default value is '0.0.0.0'. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.2.1.9 | Columnh3cAclIPAclBasicTimeRangeName | read-create | current | The Time-range of basic acl rule. Default value is null. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.2.1.10 | Columnh3cAclIPAclBasicFragmentFlag | read-create | current | The flag of matching fragmented packets. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.2.1.11 | Columnh3cAclIPAclBasicLog | read-create | current | The packet will be logged when it matches the rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.2.1.12 | Columnh3cAclIPAclBasicCount | read-only | current | The count of matched by the rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.2.1.13 | Columnh3cAclIPAclBasicCountClear | read-write | current | Reset the value of counter. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.2.1.14 | Columnh3cAclIPAclBasicEnable | read-only | current | The rule is active or not. true : active false : inactive |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.2.1.15 | Columnh3cAclIPAclBasicVpnInstanceName | read-create | current | The VPN name, which the rule will be applied. Default value is null. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.2.1.16 | Columnh3cAclIPAclBasicComment | read-create | current | The description of ACL rule. Default value is Zero-length String. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.2.1.17 | Columnh3cAclIPAclBasicCounting | read-create | current | The packet will be counted when it matches the rule. It is disabled by default. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.2.1.18 | Columnh3cAclIPAclBasicRouteTypeAny | read-create | current | The flag of matching any type of routing header of IPv6 packet. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.2.1.19 | Columnh3cAclIPAclBasicRouteTypeValue | read-create | current | Match specify type of routing header of IPv6 packet. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3 | Tableh3cAclIPAclAdvancedTable | not-accessible | current | A table of advanced and simple acl group. If some objects of this table are not supported by some products, these objects can't be created, changed and applied… |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1 | Rowh3cAclIPAclAdvancedEntry | not-accessible | current | Advanced acl group information. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.1 | Columnh3cAclIPAclAdvancedRuleIndex | not-accessible | current | The rule index of advanced acl group. As a Simple ACL group, the value of this object must be 0. As an Advanced ACL group, the value of this object is ranging … |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.2 | Columnh3cAclIPAclAdvancedRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.3 | Columnh3cAclIPAclAdvancedAct | read-create | current | The action of advanced acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.4 | Columnh3cAclIPAclAdvancedProtocol | read-create | current | The protocol-type of advanced acl group. <1-255> Protocol number gre GRE tunneling(47) icmp Internet Control Message Protocol(1) icmpv6 Internet Control Messag… |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.5 | Columnh3cAclIPAclAdvancedAddrFlag | read-create | current | Address flag to select address. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.6 | Columnh3cAclIPAclAdvancedSrcAddrType | read-create | current | The IP addresses type of IP pool. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.7 | Columnh3cAclIPAclAdvancedSrcAddr | read-create | current | The value of a local IP address available for this association. The type of this address is determined by the value of h3cAclIPAclAdvancedSrcAddrType. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.8 | Columnh3cAclIPAclAdvancedSrcPrefix | read-create | current | Denotes the length of a generic Internet network address prefix. A value of n corresponds to an IP address mask which has n contiguous 1-bits from the most sig… |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.9 | Columnh3cAclIPAclAdvancedSrcAny | read-create | current | The flag of matching any IP address. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.10 | Columnh3cAclIPAclAdvancedSrcWild | read-create | current | Source IPv4 address wild. Only IPv4 Advanced Rule supports this object. Default value is '0.0.0.0'. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.11 | Columnh3cAclIPAclAdvancedSrcOp | read-create | current | Source port operation symbol of advanced acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.12 | Columnh3cAclIPAclAdvancedSrcPort1 | read-create | current | The fourth layer source port1. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.13 | Columnh3cAclIPAclAdvancedSrcPort2 | read-create | current | The fourth layer source port2. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.14 | Columnh3cAclIPAclAdvancedDestAddrType | read-create | current | The IP addresses type of IP pool. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.15 | Columnh3cAclIPAclAdvancedDestAddr | read-create | current | The value of a local IP address available for this association. The type of this address is determined by the value of h3cAclIPAclAdvancedDestAddrType. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.16 | Columnh3cAclIPAclAdvancedDestPrefix | read-create | current | Denotes the length of a generic Internet network address prefix. A value of n corresponds to an IP address mask which has n contiguous 1-bits from the most sig… |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.17 | Columnh3cAclIPAclAdvancedDestAny | read-create | current | The flag of matching any IP address. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.18 | Columnh3cAclIPAclAdvancedDestWild | read-create | current | Destination IPv4 address wild. Only IPv4 Advanced Rule supports this object. Default value is '0.0.0.0'. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.19 | Columnh3cAclIPAclAdvancedDestOp | read-create | current | Destination port operation symbol of advanced acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.20 | Columnh3cAclIPAclAdvancedDestPort1 | read-create | current | The fourth layer destination port1. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.21 | Columnh3cAclIPAclAdvancedDestPort2 | read-create | current | The fourth layer destination port2. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.22 | Columnh3cAclIPAclAdvancedIcmpType | read-create | current | The type of ICMP packet. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.23 | Columnh3cAclIPAclAdvancedIcmpCode | read-create | current | The code of ICMP packet. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.24 | Columnh3cAclIPAclAdvancedPrecedence | read-create | current | The value of IP-packet's precedence. <0-7> Value of precedence routine Specify routine precedence(0) priority Specify priority precedence(1) immediate Specify … |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.25 | Columnh3cAclIPAclAdvancedTos | read-create | current | The value of IP-packet's TOS. <0-15> Value of TOS(type of service) max-reliability Match packets with max reliable TOS(2) max-throughput Match packets with max… |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.26 | Columnh3cAclIPAclAdvancedDscp | read-create | current | The value of DSCP of IP packet. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.27 | Columnh3cAclIPAclAdvancedTimeRangeName | read-create | current | The Time-range of advanced acl rule. Default value is null. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.28 | Columnh3cAclIPAclAdvancedTCPFlag | read-create | current | The packet type of TCP protocol. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.29 | Columnh3cAclIPAclAdvancedFragmentFlag | read-create | current | The flag of matching fragmented packet, and now support two value: 0 or 2 . |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.30 | Columnh3cAclIPAclAdvancedLog | read-create | current | Log matched packets. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.31 | Columnh3cAclIPAclAdvancedCount | read-only | current | The count of matched by the rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.32 | Columnh3cAclIPAclAdvancedCountClear | read-write | current | Reset the value of counter. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.33 | Columnh3cAclIPAclAdvancedEnable | read-only | current | The rule is active or not. true : active false : inactive |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.34 | Columnh3cAclIPAclAdvancedVpnInstanceName | read-create | current | The VPN name that the rule will be applied. Default value is null. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.35 | Columnh3cAclIPAclAdvancedComment | read-create | current | The description of ACL rule. Default value is Zero-length String. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.36 | Columnh3cAclIPAclAdvancedReflective | read-create | current | The flag of reflective. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.37 | Columnh3cAclIPAclAdvancedCounting | read-create | current | The packet will be counted when it matches the rule. It is disabled by default. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.38 | Columnh3cAclIPAclAdvancedTCPFlagMask | read-create | current | The TCP Flag Mask. This is a bit-map of possible conditions. The various bit positions are: |0 |tcpack | |1 |tcpfin | |2 |tcppsh | |3 |tcprst | |4 |tcpsyn | |5… |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.39 | Columnh3cAclIPAclAdvancedTCPFlagValue | read-create | current | The TCP Flag Value. This is a bit-map of possible conditions. The various bit positions are: |0 |tcpack | |1 |tcpfin | |2 |tcppsh | |3 |tcprst | |4 |tcpsyn | |… |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.40 | Columnh3cAclIPAclAdvancedRouteTypeAny | read-create | current | The flag of matching any type of routing header of IPv6 packet. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.41 | Columnh3cAclIPAclAdvancedRouteTypeValue | read-create | current | The type of routing header of IPv6 packet. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.2.3.1.42 | Columnh3cAclIPAclAdvancedFlowLabel | read-create | current | The value of flow label of IPv6 packet header. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.3 | Nodeh3cAclMACAclGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.8.2.3.1 | Tableh3cAclMACTable | not-accessible | current | A table of MAC acl group. If some objects of this table are not supported by some products, these objects can't be created, changed and applied. Default value … |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.3.1.1 | Rowh3cAclMACEntry | not-accessible | current | MAC acl group information. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.3.1.1.1 | Columnh3cAclMACRuleIndex | not-accessible | current | The rule index of MAC-based acl group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.3.1.1.2 | Columnh3cAclMACRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.3.1.1.3 | Columnh3cAclMACAct | read-create | current | The action of MAC acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.3.1.1.4 | Columnh3cAclMACTypeCode | read-create | current | The type of protocol. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.3.1.1.5 | Columnh3cAclMACTypeMask | read-create | current | The mask of protocol. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.3.1.1.6 | Columnh3cAclMACSrcMac | read-create | current | Source MAC of MAC acl rule. Default value is '00:00:00:00:00:00'. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.3.1.1.7 | Columnh3cAclMACSrcMacWild | read-create | current | Source MAC wildzard of MAC acl rule. Default value is '00:00:00:00:00:00'. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.3.1.1.8 | Columnh3cAclMACDestMac | read-create | current | Destination MAC of MAC acl rule. Default value is '00:00:00:00:00:00'. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.3.1.1.9 | Columnh3cAclMACDestMacWild | read-create | current | Destination MAC wildzard of MAC acl rule. Default value is '00:00:00:00:00:00' |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.3.1.1.10 | Columnh3cAclMACLsapCode | read-create | current | The type of LSAP. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.3.1.1.11 | Columnh3cAclMACLsapMask | read-create | current | The mask of LSAP. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.3.1.1.12 | Columnh3cAclMACCos | read-create | current | Vlan priority of MAC acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.3.1.1.13 | Columnh3cAclMACTimeRangeName | read-create | current | The Time-range of MAC acl rule. Default value is null. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.3.1.1.14 | Columnh3cAclMACCount | read-only | current | The count of matched frame by the rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.3.1.1.15 | Columnh3cAclMACCountClear | read-write | current | Reset the value of counter. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.3.1.1.16 | Columnh3cAclMACEnable | read-only | current | The rule is active or not. true : active false : inactive |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.3.1.1.17 | Columnh3cAclMACComment | read-create | current | The description of ACL rule. Default value is Zero-length String. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.3.1.1.18 | Columnh3cAclMACLog | read-create | current | The packet will be logged when it matches the rule. It is disabled by default. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.3.1.1.19 | Columnh3cAclMACCounting | read-create | current | The packet will be counted when it matches the rule. It is disabled by default. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.4 | Nodeh3cAclEnUserAclGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.8.2.4.3 | Tableh3cAclEnUserTable | not-accessible | current | A table of user acl group information. If some objects of this table are not supported by some products, these objects can't be created, changed and applied. D… |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.4.3.1 | Rowh3cAclEnUserEntry | not-accessible | current | User defined acl group entry. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.4.3.1.1 | Columnh3cAclEnUserRuleIndex | not-accessible | current | The subitem of the user acl. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.4.3.1.2 | Columnh3cAclEnUserRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.4.3.1.3 | Columnh3cAclEnUserAct | read-create | current | The action of user defined acl rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.4.3.1.4 | Columnh3cAclEnUserStartString | read-create | current | The rule, matching packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value of this object is defined by product and it indicates … |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.4.3.1.5 | Columnh3cAclEnUserL2String | read-create | current | The rule, matching layer 2 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset … |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.4.3.1.6 | Columnh3cAclEnUserMplsString | read-create | current | The rule, matching mpls packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of … |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.4.3.1.7 | Columnh3cAclEnUserIPv4String | read-create | current | The rule, matching IPv4 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of … |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.4.3.1.8 | Columnh3cAclEnUserIPv6String | read-create | current | The rule, matching IPv6 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset of … |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.4.3.1.9 | Columnh3cAclEnUserL4String | read-create | current | The rule, matching layer 4 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset … |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.4.3.1.10 | Columnh3cAclEnUserL5String | read-create | current | The rule, matching layer 5 packets, input like this: 'RuleOffset','RuleString','RuleMask'. RuleOffset: The value is defined by product and it indicates offset … |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.4.3.1.11 | Columnh3cAclEnUserTimeRangeName | read-create | current | The Time-range of user acl rule. Default value is null. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.4.3.1.12 | Columnh3cAclEnUserCount | read-only | current | The count of matched by the rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.4.3.1.13 | Columnh3cAclEnUserCountClear | read-write | current | Reset the value of counter. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.4.3.1.14 | Columnh3cAclEnUserEnable | read-only | current | The rule is active or not. true : active false : inactive |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.4.3.1.15 | Columnh3cAclEnUserComment | read-create | current | The description of ACL rule. Default value is Zero-length String. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.4.3.1.16 | Columnh3cAclEnUserLog | read-create | current | The packet will be logged when it matches the rule. It is disabled by default. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.4.3.1.17 | Columnh3cAclEnUserCounting | read-create | current | The packet will be counted when it matches the rule. It is disabled by default. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.5 | Nodeh3cAclResourceGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.8.2.5.1 | Tableh3cAclResourceUsageTable | not-accessible | current | The table shows ACL resource usage information. Support for resource types that are denoted by h3cAclResourceType object varies with products. If a type is not… |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.5.1.1 | Rowh3cAclResourceUsageEntry | not-accessible | current | Each row contains a brief description of the resource type, a port range associated with the chip, total, reserved, and configured amount of resource of this t… |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.5.1.1.1 | Columnh3cAclResourceChassis | not-accessible | current | The chassis number. On a centralized or distributed device, the value for this node is always zero. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.5.1.1.2 | Columnh3cAclResourceSlot | not-accessible | current | The slot number. On a centralized device, the value for this node is always zero. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.5.1.1.3 | Columnh3cAclResourceChip | not-accessible | current | The chip number. On a single chip device, the value for this node is always zero. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.5.1.1.4 | Columnh3cAclResourceType | not-accessible | current | The resource type. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.5.1.1.5 | Columnh3cAclPortRange | read-only | current | The port range associated with the chip. Commas are used to separate multiple port ranges, for example, Ethernet1/2 to Ethernet1/12, Ethernet1/31 to Ethernet1/… |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.5.1.1.6 | Columnh3cAclResourceTotal | read-only | current | Total TCAM entries of the resource type. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.5.1.1.7 | Columnh3cAclResourceReserved | read-only | current | The amount of reserved TCAM entries of the resource type. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.5.1.1.8 | Columnh3cAclResourceConfigured | read-only | current | The amount of configured TCAM entries of the resource type. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.5.1.1.9 | Columnh3cAclResourceUsagePercent | read-only | current | The percent of TCAM entries that have been used for this resource type. |
| 1.3.6.1.4.1.43.45.1.10.2.8.2.5.1.1.10 | Columnh3cAclResourceTypeDescription | read-only | current | The description of this resource type. |
| 1.3.6.1.4.1.43.45.1.10.2.8.3 | Nodeh3cAclPacketFilterObjects | |||
| 1.3.6.1.4.1.43.45.1.10.2.8.3.1 | Nodeh3cPfilterScalarGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.8.3.1.1 | Scalarh3cPfilterDefaultAction | read-write | current | The default action of packet filter. By default, the packet filter permits packets that do not match any ACL rule to pass. |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.1.2 | Scalarh3cPfilterProcessingStatus | read-only | current | This object shows the status of the system when applying packet filter. It is forbidden to set or read in h3cAclPacketFilterObjects MIB module when the value i… |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.2 | Tableh3cPfilterApplyTable | not-accessible | current | A table of packet filter application. It's not supported to set default action on an entity, but supported to enable hardware count of default action on an ent… |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.2.1 | Rowh3cPfilterApplyEntry | not-accessible | current | Packet filter application information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.2.1.1 | Columnh3cPfilterApplyObjType | not-accessible | current | The object type of packet filter application. interface: Apply an ACL to the interface to filter packets. vlan: Apply an ACL to the VLAN to filter packets. glo… |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.2.1.2 | Columnh3cPfilterApplyObjIndex | not-accessible | current | The object ID of packet filter application. Interface: interface index, equal to ifIndex VLAN: VLAN ID, 1..4094 Global: 0 |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.2.1.3 | Columnh3cPfilterApplyDirection | not-accessible | current | The direction of packet filter application. |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.2.1.4 | Columnh3cPfilterApplyAclType | not-accessible | current | ACL Type: IPv4, IPv6, default action. Take default action as a special ACL group. |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.2.1.5 | Columnh3cPfilterApplyAclIndex | not-accessible | current | The ACL group index. Basic type: 2000..2999 Advanced type: 3000..3999 MAC type: 4000..4999 User type: 5000..5999 Default action type: 0 |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.2.1.6 | Columnh3cPfilterApplyHardCount | read-create | current | Hardware count flag. true: enable hardware count false: disable hardware count |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.2.1.7 | Columnh3cPfilterApplySequence | read-only | current | The configure sequence of packet filter application. |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.2.1.8 | Columnh3cPfilterApplyCountClear | read-write | current | Clear the value of counters. |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.2.1.9 | Columnh3cPfilterApplyRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.3 | Tableh3cPfilterAclGroupRunInfoTable | not-accessible | current | A table of group running information of ACLs for packet filtering. If hardware count function is not supported or not enabled to the packet filter application,… |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.3.1 | Rowh3cPfilterAclGroupRunInfoEntry | not-accessible | current | ACL group running information entry for packet filtering. |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.3.1.1 | Columnh3cPfilterAclGroupStatus | read-only | current | The status of ACL group applied. success: ACL applied successfully on all slots failed: failed to apply ACL on all slots partialSuccess: failed to apply ACL on… |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.3.1.2 | Columnh3cPfilterAclGroupCountStatus | read-only | current | The status of enabling hardware count. If hardware count is not enabled, it returns success. success: enable hardware count successfully on all slots failed: f… |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.3.1.3 | Columnh3cPfilterAclGroupPermitPkts | read-only | current | The number of packets permitted. |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.3.1.4 | Columnh3cPfilterAclGroupPermitBytes | read-only | current | The number of bytes permitted. |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.3.1.5 | Columnh3cPfilterAclGroupDenyPkts | read-only | current | The number of packets denied. |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.3.1.6 | Columnh3cPfilterAclGroupDenyBytes | read-only | current | The number of bytes denied. |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.4 | Tableh3cPfilterAclRuleRunInfoTable | not-accessible | current | A table of rule's running information of ACLs for packet filtering. If hardware count function is not supported or not enabled to the packet filter application… |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.4.1 | Rowh3cPfilterAclRuleRunInfoEntry | not-accessible | current | ACL rule's running information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.4.1.1 | Columnh3cPfilterAclRuleIndex | not-accessible | current | The ACL rule index. |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.4.1.2 | Columnh3cPfilterAclRuleStatus | read-only | current | The status of rule application. success: rule applied successfully on all slots failed: failed to apply rule on all slots partialSuccess: failed to apply rule … |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.4.1.3 | Columnh3cPfilterAclRuleCountStatus | read-only | current | The status of enabling rule's hardware count. If hardware count is not enabled, it returns success. success: enable hardware count successfully on all slots fa… |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.4.1.4 | Columnh3cPfilterAclRuleMatchPackets | read-only | current | The number of packets matched. |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.4.1.5 | Columnh3cPfilterAclRuleMatchBytes | read-only | current | The number of bytes matched. |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.5 | Tableh3cPfilterStatisticSumTable | not-accessible | current | A table of ACL rule's sum statistics information, accumulated by all entity application on all slots. |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.5.1 | Rowh3cPfilterStatisticSumEntry | not-accessible | current | ACL rule's sum statistics information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.5.1.1 | Columnh3cPfilterSumDirection | not-accessible | current | The direction of application. |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.5.1.2 | Columnh3cPfilterSumAclType | not-accessible | current | ACL type, IPv4 or IPv6. |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.5.1.3 | Columnh3cPfilterSumAclIndex | not-accessible | current | The ACL group index. Basic type: 2000..2999 Advanced type: 3000..3999 MAC type: 4000..4999 User type: 5000..5999 |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.5.1.4 | Columnh3cPfilterSumRuleIndex | not-accessible | current | The ACL rule index. |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.5.1.5 | Columnh3cPfilterSumRuleMatchPackets | read-only | current | The sum number of packets matched the ACL rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.3.5.1.6 | Columnh3cPfilterSumRuleMatchBytes | read-only | current | The sum number of bytes matched the ACL rule. |
| 1.3.6.1.4.1.43.45.1.10.2.8.4 | Nodeh3cAclPacketfilterTrapObjects | |||
| 1.3.6.1.4.1.43.45.1.10.2.8.4.1 | Scalarh3cPfilterInterface | accessible-for-notify | current | The interface which policy apply. |
| 1.3.6.1.4.1.43.45.1.10.2.8.4.2 | Scalarh3cPfilterDirection | accessible-for-notify | current | Inbound or outbound. |
| 1.3.6.1.4.1.43.45.1.10.2.8.4.3 | Scalarh3cPfilterACLNumber | accessible-for-notify | current | ACL number. |
| 1.3.6.1.4.1.43.45.1.10.2.8.4.4 | Scalarh3cPfilterAction | accessible-for-notify | current | Permit or deny. |
| 1.3.6.1.4.1.43.45.1.10.2.8.4.5 | Scalarh3cMACfilterSourceMac | accessible-for-notify | current | Source MAC address. |
| 1.3.6.1.4.1.43.45.1.10.2.8.4.6 | Scalarh3cMACfilterDestinationMac | accessible-for-notify | current | Destination MAC address. |
| 1.3.6.1.4.1.43.45.1.10.2.8.4.7 | Scalarh3cPfilterPacketNumber | accessible-for-notify | current | The number of packets permitted or denied by ACL. |
| 1.3.6.1.4.1.43.45.1.10.2.8.4.8 | Scalarh3cPfilterReceiveInterface | accessible-for-notify | current | The interface where packet come from. |
| 1.3.6.1.4.1.43.45.1.10.2.8.5 | Nodeh3cAclPacketfilterTrap | |||
| 1.3.6.1.4.1.43.45.1.10.2.8.5.0 | Nodeh3cPfilterTrapPrefix | |||
| 1.3.6.1.4.1.43.45.1.10.2.8.5.0.1 | Notificationh3cMACfilterTrap | current | This notification is generated when a packet was processed by MAC address filter, but not every packet will generate one notification, the same notification on… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AddressFlag | INTEGER { invalid(0), t64SrcAddrPre64DestAddrPre(1), t64SrcAddrPre64DestAddrSuf(2), t64SrcAddrSuf64DestAddrPre(3), t64SrcAddrSuf64DestAddrSuf(4), t128SourceAddress(5), t128DestinationAddress(6) } | current | Address flag to select IPv6 Address. Default value is 'invalid'. t64SrcAddrPre64DestAddrPre(1): The mean of the enumeration 't64SrcAddrPre64DestAddrPre' is that system gets the 64 bits prefix of source address and the 6… |
| CounterClear | INTEGER { cleared(1), nouse(2) } | current | cleared: Reset the value of the rule's counter. nouse: 'nouse' will be returned when getting. |
| DirectionType | INTEGER { inbound(1), outbound(2) } | current | The direction: inbound or outbound. |
| DSCPValue | Integer32 (0..63|255) | current | The value of DSCP. <0-63> Value of DSCP af11 Specify Assured Forwarding 11 service(10) af12 Specify Assured Forwarding 12 service(12) af13 Specify Assured Forwarding 13 service(14) af21 Specify Assured Forwarding 21 ser… |
| FragmentFlag | INTEGER { invalid(0), fragment(1), fragmentSubseq(2), nonFragment(3), nonSubseq(4) } | current | Type of fragment. invalid(0) fragment(1) Frag-Type Fragment fragmentSubseq(2) Frag-Type Fragment-subsequent nonFragment(3) Frag-Type non-Fragment nonSubseq(4) Frag-Type non-subsequent Default value is 'invalid'. |
| PortOp | INTEGER { invalid(0), lt(1), eq(2), gt(3), neq(4), range(5) } | current | The operation type of TCP and UDP. lt : Less than given port number. eq : Equal to given port number. gt : Greater than given port number. neq : Not equal to given port number. range : Between two port numbers. Default … |
| RuleAction | INTEGER { invalid(1), permit(2), deny(3) } | current | The value of rule's action. permit: The packet matching the rule will be permitted to forward. deny: The packet matching the rule will be denied. |
| TCPFlag | INTEGER { invalid(0), tcpack(1), tcpfin(2), tcppsh(3), tcprst(4), tcpsyn(5), tcpurg(6) } | current | Type of TCP. invalid(0) tcpack(1) TCP protocol ACK Packet tcpfin(2) TCP protocol PIN Packet tcppsh(3) TCP protocol PUSH Packet tcprst(4) TCP protocol RST Packet tcpsyn(5) TCP protocol SYN Packet tcpurg(6) TCP protocol U… |