A3Com-IPXpolicy-r3-MIB
69 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | enterprises |
| RFC1213-MIB | DisplayString |
| RFC1286-MIB MISSING | MacAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43 | Nodea3Com | |||
| 1.3.6.1.4.1.43.2 | NodebrouterMIB | |||
| 1.3.6.1.4.1.43.2.11 | Nodea3ComIPXpol | |||
| 1.3.6.1.4.1.43.2.11.1 | Tablea3ipxPolControlTable | not-accessible | mandatory | This table enables and disables the use of policies, policy attributes and the use of trusted neighbors and their attributes. |
| 1.3.6.1.4.1.43.2.11.1.1 | Rowa3ipxPolControlEntry | not-accessible | mandatory | A single entry in the Policy Control Table |
| 1.3.6.1.4.1.43.2.11.1.1.1 | Columna3ipxPCPort | read-only | mandatory | The port to which this Policy Control entry applies. |
| 1.3.6.1.4.1.43.2.11.1.1.2 | Columna3ipxPCRteAdvCtl | read-write | mandatory | The object enables or disables the use of the 'advertisable' entries in the Route Policy Table. |
| 1.3.6.1.4.1.43.2.11.1.1.3 | Columna3ipxPCRteAdvType | read-write | mandatory | The object specifies whether only those routes listed as 'advertisable' in the Route Policy Table are advertised from this port (normal), or if only those rout… |
| 1.3.6.1.4.1.43.2.11.1.1.4 | Columna3ipxPCRteRcvCtl | read-write | mandatory | The object enables or disables the use of the 'receivable' entries in the Route Policy Table. |
| 1.3.6.1.4.1.43.2.11.1.1.5 | Columna3ipxPCRteRcvType | read-write | mandatory | The object specifies whether only those routes listed as 'receivable' in the Route Policy Table are accepted from this port (normal), or if only those routes t… |
| 1.3.6.1.4.1.43.2.11.1.1.6 | Columna3ipxPCSvcAdvCtl | read-write | mandatory | The object enables or disables the use of the 'advertisable' entries in the Service Policy Table. |
| 1.3.6.1.4.1.43.2.11.1.1.7 | Columna3ipxPCSvcAdvType | read-write | mandatory | The object specifies whether only those routes listed as 'advertisable' in the Service Policy Table are advertised from this port (normal), or if only those ro… |
| 1.3.6.1.4.1.43.2.11.1.1.8 | Columna3ipxPCSvcRcvCtl | read-write | mandatory | The object enables or disables the use of the 'receivable' entries in the Service Policy Table. |
| 1.3.6.1.4.1.43.2.11.1.1.9 | Columna3ipxPCSvcRcvType | read-write | mandatory | The object specifies whether only those routes listed as 'receivable' in the Service Policy Table are accepted from this port (normal), or if only those routes… |
| 1.3.6.1.4.1.43.2.11.1.1.10 | Columna3ipxPCNbrAdvCtl | read-write | deprecated | This object enables or disables the use of the entries in the Neighbor Policy Table that apply to neighbors to which routing and service reachability informati… |
| 1.3.6.1.4.1.43.2.11.1.1.11 | Columna3ipxPCNbrRcvCtl | read-write | deprecated | The object enables or disables the use of the entries in the Neighbor Policy Table that apply to neighbors from which routing and service reachability informat… |
| 1.3.6.1.4.1.43.2.11.1.1.12 | Columna3ipxPCNbrRcvType | read-write | deprecated | If this object is set to normal(1), then route and service reachability information is accepted only from those neighbors listed in the Neighbor Policy Table f… |
| 1.3.6.1.4.1.43.2.11.1.1.13 | Columna3ipxPCPolicyOverride | read-write | deprecated | Policy Override is used to override the configured policies when the router issues responses to specific RIP or SAP requests. The configured policies are alway… |
| 1.3.6.1.4.1.43.2.11.1.1.14 | Columna3ipxPCSvrRplyCtl | read-write | mandatory | This controls whether or not the router is permitted to respond to 'get nearest server' requests. If this object has the value bestSvrReply(1), then this route… |
| 1.3.6.1.4.1.43.2.11.1.1.15 | Columna3ipxPCRipPolOverride | read-write | mandatory | RIP Policy Override is used to override the configured RIP policies when the router issues responses to specific RIP requests. The configured policies are alwa… |
| 1.3.6.1.4.1.43.2.11.1.1.16 | Columna3ipxPCSapPolOverride | read-write | mandatory | SAP Policy Override is used to override the configured policies when the router issues responses to specific SAP requests. The configured policies are always a… |
| 1.3.6.1.4.1.43.2.11.2 | Tablea3ipxPolRteTable | not-accessible | mandatory | The IPX Route Policy Table controls the acceptance of route reachability information from neighbors and the advertisement of route reachability information to … |
| 1.3.6.1.4.1.43.2.11.2.1 | Rowa3ipxPolRteEntry | not-accessible | mandatory | A single entry in the Route Policy table |
| 1.3.6.1.4.1.43.2.11.2.1.1 | Columna3ipxPolRtePort | read-only | mandatory | The IPX port to which this Receive Route Policy entry applies. |
| 1.3.6.1.4.1.43.2.11.2.1.2 | Columna3ipxPolRteType | read-write | mandatory | This object specifies whether this entry applies to receiving routes, advertising routes, or both. |
| 1.3.6.1.4.1.43.2.11.2.1.3 | Columna3ipxPolRteNet1 | read-only | mandatory | The IPX Network Number for which route information is accepted or rejected for this port. The value 0xfffffffe is used to represent the default route. |
| 1.3.6.1.4.1.43.2.11.2.1.4 | Columna3ipxPolRteNet2 | read-only | mandatory | When the value of this object is a valid IPX network and different from a3ipxPolRteNet1, then this table entries specifies a range of IPX networks, with the va… |
| 1.3.6.1.4.1.43.2.11.2.1.5 | Columna3ipxPolRteStatus | read-write | mandatory | This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB. |
| 1.3.6.1.4.1.43.2.11.3 | Tablea3ipxPolSvcTable | not-accessible | mandatory | The IPX Policy Services Table controls the acceptance of service reachability information from neighbors and the advertisement of that information to neighbors… |
| 1.3.6.1.4.1.43.2.11.3.1 | Rowa3ipxPolSvcEntry | not-accessible | mandatory | A single entry in the Receive Services Policy table. |
| 1.3.6.1.4.1.43.2.11.3.1.1 | Columna3ipxPolSvcPort | read-only | mandatory | The IPX port to which this Receive Svc Pol entry applies. |
| 1.3.6.1.4.1.43.2.11.3.1.2 | Columna3ipxPolSvcEntryType | read-write | mandatory | This object specifies whether this entry applies to receiving services, advertising services, or both. |
| 1.3.6.1.4.1.43.2.11.3.1.3 | Columna3ipxPolSvcSvrName | read-only | mandatory | This object contains the name of a server. A single wildcard (*) is allowed at the end of the name. |
| 1.3.6.1.4.1.43.2.11.3.1.4 | Columna3ipxPolSvcType | read-only | mandatory | The type of service for which information is accepted or rejected by this port. The value 'FFFF' acts as a wildcard for all service types. |
| 1.3.6.1.4.1.43.2.11.3.1.5 | Columna3ipxPolSvcStatus | read-write | mandatory | This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB. |
| 1.3.6.1.4.1.43.2.11.4 | Tablea3ipxPolNbrTable | not-accessible | deprecated | This table defines a set of neighbors to which the route and service reachability information is advertised. This table also defines a set of neighbors from wh… |
| 1.3.6.1.4.1.43.2.11.4.1 | Rowa3ipxPolNbrEntry | not-accessible | deprecated | A single entry in the Policy Neighbor Table |
| 1.3.6.1.4.1.43.2.11.4.1.1 | Columna3ipxPolNbrPort | read-only | deprecated | The IPX port over which the Trusted Neighbor identified by this table entry can be reached. |
| 1.3.6.1.4.1.43.2.11.4.1.2 | Columna3ipxPolNbrType | read-write | deprecated | This object specifies whether this entry applies to receiving information, advertising information, or both. |
| 1.3.6.1.4.1.43.2.11.4.1.3 | Columna3ipxPolNbrNet | read-only | deprecated | The IPX Network number identifying the network to which the neighbor identified by this table entry is attached. |
| 1.3.6.1.4.1.43.2.11.4.1.4 | Columna3ipxPolNbrAddress | read-only | deprecated | The Mac Address of the Neighbor to whom route and service reachability information is to be advertised and from which route and service reachability informatio… |
| 1.3.6.1.4.1.43.2.11.4.1.5 | Columna3ipxPolNbrStatus | read-write | deprecated | This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB. |
| 1.3.6.1.4.1.43.2.11.5 | Nodea3ipxPolNbr | |||
| 1.3.6.1.4.1.43.2.11.5.1 | Tablea3ipxPolRipNbrCtlTable | not-accessible | mandatory | This table enables or disables the use of the entries in a3ipxPolRipNbrTable. If the use of the entries in that table is enabled, this table also controls how … |
| 1.3.6.1.4.1.43.2.11.5.1.1 | Rowa3ipxPolRipNbrCtlEntry | not-accessible | mandatory | Each entry in this table applies to a separate NETBuilder port and controls those entries in a3ipxPolRipNbrTable that correspond to the same port. |
| 1.3.6.1.4.1.43.2.11.5.1.1.1 | Columna3ipxPolRipNbrCtlPort | read-only | mandatory | This NETBuilder port to which this RIP Neighbor Control entry applies. |
| 1.3.6.1.4.1.43.2.11.5.1.1.2 | Columna3ipxPolRipNbrCtlAdvCtl | read-write | mandatory | This object enables or disables the use of the entries in the RIP Neighbor Policy Table (a3ipxPolRipNbrTable) that apply to neighbors to which routing informat… |
| 1.3.6.1.4.1.43.2.11.5.1.1.3 | Columna3ipxPolRipNbrCtlRcvCtl | read-write | mandatory | The object enables or disables the use of the entries in the Neighbor Policy Table that apply to neighbors from which routing information is allowed to be rece… |
| 1.3.6.1.4.1.43.2.11.5.1.1.4 | Columna3ipxPolRipNbrCtlRcvType | read-write | mandatory | If this object is set to normal(1), then route information is accepted only from those neighbors listed in the Neighbor Policy Table for which a3ipxPolRipNbrTy… |
| 1.3.6.1.4.1.43.2.11.5.2 | Tablea3ipxPolRipNbrTable | not-accessible | mandatory | This table defines a set of neighbors to which the route information is advertised. This table also defines a set of neighbors from which route information is … |
| 1.3.6.1.4.1.43.2.11.5.2.1 | Rowa3ipxPolRipNbrEntry | not-accessible | mandatory | A single entry in the Policy Neighbor Table |
| 1.3.6.1.4.1.43.2.11.5.2.1.1 | Columna3ipxPolRipNbrPort | read-only | mandatory | The IPX port over which the Trusted Neighbor identified by this table entry can be reached. |
| 1.3.6.1.4.1.43.2.11.5.2.1.2 | Columna3ipxPolRipNbrType | read-write | mandatory | This object specifies whether this entry applies to receiving information, advertising information, or both. |
| 1.3.6.1.4.1.43.2.11.5.2.1.3 | Columna3ipxPolRipNbrNet | read-only | mandatory | The IPX Network number identifying the network to which the neighbor identified by this table entry is attached. |
| 1.3.6.1.4.1.43.2.11.5.2.1.4 | Columna3ipxPolRipNbrAddress | read-only | mandatory | The Mac Address of the Neighbor to whom route information is to be advertised and from which route information is accepted. |
| 1.3.6.1.4.1.43.2.11.5.2.1.5 | Columna3ipxPolRipNbrStatus | read-write | mandatory | This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB. |
| 1.3.6.1.4.1.43.2.11.5.3 | Tablea3ipxPolSapNbrCtlTable | not-accessible | mandatory | This table enables or disables the use of the entries in a3ipxPolSapNbrTable. If the use of the entries in that table is enabled, this table also controls how … |
| 1.3.6.1.4.1.43.2.11.5.3.1 | Rowa3ipxPolSapNbrCtlEntry | not-accessible | mandatory | Each entry in this table applies to a separate NETBuilder port and controls those entries in a3ipxPolSapNbrTable that correspond to the same port. |
| 1.3.6.1.4.1.43.2.11.5.3.1.1 | Columna3ipxPolSapNbrCtlPort | read-only | mandatory | This NETBuilder port to which this SAP Neighbor Control entry applies. |
| 1.3.6.1.4.1.43.2.11.5.3.1.2 | Columna3ipxPolSapNbrCtlAdvCtl | read-write | mandatory | This object enables or disables the use of the entries in the SAP Neighbor Policy Table (a3ipxPolSapNbrTable) that apply to neighbors to which service reachabi… |
| 1.3.6.1.4.1.43.2.11.5.3.1.3 | Columna3ipxPolSapNbrCtlRcvCtl | read-write | mandatory | The object enables or disables the use of the entries in the Neighbor Policy Table that apply to neighbors from which service reachability information is allow… |
| 1.3.6.1.4.1.43.2.11.5.3.1.4 | Columna3ipxPolSapNbrCtlRcvType | read-write | mandatory | If this object is set to normal(1), then service reachability information is accepted only from those neighbors listed in the Neighbor Policy Table for which a… |
| 1.3.6.1.4.1.43.2.11.5.4 | Tablea3ipxPolSapNbrTable | not-accessible | mandatory | This table defines a set of neighbors to which the service reachability information is advertised. This table also defines a set of neighbors from which servic… |
| 1.3.6.1.4.1.43.2.11.5.4.1 | Rowa3ipxPolSapNbrEntry | not-accessible | mandatory | A single entry in the Policy Neighbor Table |
| 1.3.6.1.4.1.43.2.11.5.4.1.1 | Columna3ipxPolSapNbrPort | read-only | mandatory | The IPX port over which the Trusted Neighbor identified by this table entry can be reached. |
| 1.3.6.1.4.1.43.2.11.5.4.1.2 | Columna3ipxPolSapNbrType | read-write | mandatory | This object specifies whether this entry applies to receiving information, advertising information, or both. |
| 1.3.6.1.4.1.43.2.11.5.4.1.3 | Columna3ipxPolSapNbrNet | read-only | mandatory | The IPX Network number identifying the network to which the neighbor identified by this table entry is attached. |
| 1.3.6.1.4.1.43.2.11.5.4.1.4 | Columna3ipxPolSapNbrAddress | read-only | mandatory | The Mac Address of the Neighbor to whom service reachability information is to be advertised and from which service reachability information is accepted. |
| 1.3.6.1.4.1.43.2.11.5.4.1.5 | Columna3ipxPolSapNbrStatus | read-write | mandatory | This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB. |