A3COM-HUAWEI-LAG-MIB
29 objects
LACP extend MIB.
Imported Objects
| A3COM-HUAWEI-OID-MIB | huaweiDatacomm huaweiMgmt |
| Q-BRIDGE-MIB | PortList |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.45.1.5.25.25 | IdentityhwLAG | LACP extend MIB. | ||
| 1.3.6.1.4.1.43.45.1.5.25.25.1 | NodehwLAGMibObjects | |||
| 1.3.6.1.4.1.43.45.1.5.25.25.1.1 | TablehwAggLinkTable | not-accessible | current | A table of aggregate link objects. |
| 1.3.6.1.4.1.43.45.1.5.25.25.1.1.1 | RowhwAggLinkEntry | not-accessible | current | Entry of table. |
| 1.3.6.1.4.1.43.45.1.5.25.25.1.1.1.1 | ColumnhwAggLinkNumber | accessible-for-notify | current | The serial number of aggregation group. |
| 1.3.6.1.4.1.43.45.1.5.25.25.1.1.1.2 | ColumnhwAggLinkName | read-create | current | Aggregation name. |
| 1.3.6.1.4.1.43.45.1.5.25.25.1.1.1.3 | ColumnhwAggLinkMode | read-create | current | Type of aggregation. manual: Manual aggregation, no LACP. static: Membership specified by user, LACP is used to validate. dynamic: Completely dynamic aggregati… |
| 1.3.6.1.4.1.43.45.1.5.25.25.1.1.1.4 | ColumnhwAggLinkPortList | read-create | current | List of ports in this link aggregation group, by bridge port number. If the mode of the link aggregation group is manual or static, you can update this list to… |
| 1.3.6.1.4.1.43.45.1.5.25.25.1.1.1.5 | ColumnhwAggLinkState | read-create | current | RowStatus, now support three states: createAndGo, active, destroy. |
| 1.3.6.1.4.1.43.45.1.5.25.25.1.1.1.6 | ColumnhwAggPortListSelectedPorts | read-only | current | A PortList of physical ports that have been selected but not attached to this aggregator. When the bit is set to 1,it means the corresponding port is in the po… |
| 1.3.6.1.4.1.43.45.1.5.25.25.1.1.1.7 | ColumnhwAggPortListSamePartnerPorts | read-only | current | PortList of physical ports that have the same Actor SystemID and partner systemID as this aggregator, but have different actor and partner keys of aggregator. |
| 1.3.6.1.4.1.43.45.1.5.25.25.1.2 | TablehwAggPortTable | not-accessible | current | A table of aggregate port objects. |
| 1.3.6.1.4.1.43.45.1.5.25.25.1.2.1 | RowhwAggPortEntry | not-accessible | current | Entry of table. |
| 1.3.6.1.4.1.43.45.1.5.25.25.1.2.1.1 | ColumnhwAggPortIndex | accessible-for-notify | current | Port ifindex which is according to RFC1213 MIB. |
| 1.3.6.1.4.1.43.45.1.5.25.25.1.2.1.2 | ColumnhwAggPortNotAttachedReason | read-write | current | Reason why this port is selected for an aggregator but not attached, 0: The port is attached to this aggregator. 1: The current number of active ports has reac… |
| 1.3.6.1.4.1.43.45.1.5.25.25.1.2.1.3 | ColumnhwAggPortLacpState | read-write | current | Control ports' lacp enble or disable. |
| 1.3.6.1.4.1.43.45.1.5.25.25.1.2.1.4 | ColumnhwAggPortNotAttachedString | read-write | current | The string which interprets this port is selected for an aggregator but not attached. |
| 1.3.6.1.4.1.43.45.1.5.25.25.1.3 | ScalarhwAggResourceAllocationValue | read-only | current | The priority value calculated to decide which aggregations have first call on the load-sharing aggregation resources in the hardware. It depends on the aggrega… |
| 1.3.6.1.4.1.43.45.1.5.25.25.2 | NodehwLAGMibNotifications | |||
| 1.3.6.1.4.1.43.45.1.5.25.25.2.1 | NotificationhwAggSpeedChangedNotification | current | This event will be triggered whenever an aggregation changes its speed. | |
| 1.3.6.1.4.1.43.45.1.5.25.25.2.2 | NotificationhwAggPortInactiveNotification | current | This event will be triggered whenever any port in aggregator is made inactive. | |
| 1.3.6.1.4.1.43.45.1.5.25.25.2.3 | NotificationhwAggPortInactiveNotification2 | current | This event will be triggered whenever the port in aggregator is made inactive. | |
| 1.3.6.1.4.1.43.45.1.5.25.25.2.4 | NotificationhwAggPortActiveNotification | current | This event will be triggered whenever the port in aggregator is made active. | |
| 1.3.6.1.4.1.43.45.1.5.25.25.3 | NodehwLAGMibConformance | |||
| 1.3.6.1.4.1.43.45.1.5.25.25.3.1 | NodehwLAGMibCompliances | |||
| 1.3.6.1.4.1.43.45.1.5.25.25.3.1.1 | CompliancehwLAGMibCompliance | current | The compliance statement for SNMP entities which implement the Lag MIB. | |
| 1.3.6.1.4.1.43.45.1.5.25.25.3.2 | NodehwLAGMibGroup | |||
| 1.3.6.1.4.1.43.45.1.5.25.25.3.2.1 | GrouphwLAGMibObjectGroup | current | The collection of objects which are used to represent LAG objects. | |
| 1.3.6.1.4.1.43.45.1.5.25.25.3.2.2 | GrouphwLAGMibNotificationGroup | current | The collection of objects which are used to represent notifications. |