A3COM-HUAWEI-EPON-DEVICE-MIB
97 objects
The objects in this MIB module are used to manage Ethernet Passive Optical Network (EPON) devices which are based on the Ethernet in the First Mile (EFM) PON as defined in IEEE Draft P802.3ah/D3.0 clause 60,64,65. This mib is excerpted from the draft files directly,only changed the object name,added the h3c as prefix. The following reference is used throughout this MIB module: [802.3ah] refers to: IEEE Draft P802.3ah/D3.3: 'Draft amendment to - Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications - Media Access Control Parameters, Physical Layers and Management Parameters for subscriber access networks', 22 April 2004. Of particular interest are Clause 64(MPCP) 65(P2mP RS) and 60 (PON PMDs). Clause 30, 'Management', and Clause 45,'Management Data Input/Output (MDIO) Interface'. Copyright (C) The Internet Society (2004). This version of this MIB module is part of XXXX see the RFC itself for full legal notices.
Imported Objects
| A3COM-HUAWEI-OID-MIB | h3cEpon |
| IF-MIB | ifIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 mib-2 MODULE-IDENTITY OBJECT-TYPE Unsigned32 zeroDotZero |
| SNMPv2-TC | DateAndTime MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.45.1.10.2.42.4 | Identityh3cEponDeviceMIB | The objects in this MIB module are used to manage Ethernet Passive Optical Network (EPON) devices which are based on the Ethernet in the First Mile (EFM) PON a… | ||
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1 | Nodeh3cEponDeviceObjectMIB | |||
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1 | Nodeh3cEponDeviceObjects | |||
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1 | Nodeh3cEponDeviceControlObjects | |||
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1 | Tableh3cEponDeviceControlTable | not-accessible | current | Table for EPON device MIB modules. |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1 | Rowh3cEponDeviceControlEntry | not-accessible | current | An entry in the EPON device Control table. |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.1 | Columnh3cEponDeviceObjectReset | read-write | current | This variable is used to reset the EPON device. The interface may be unavailable while the reset occurs and data may be lost. During reading operation it retur… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.2 | Columnh3cEponDeviceObjectModes | read-only | current | This variable defines the mode of the EPON device. When an olt(1) it is an Optical Line Terminal device (server) and when an onu(2) and Optical Network Unit de… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.4 | Columnh3cEponDeviceObjectFecEnabled | read-write | current | This variable defines and provides information whether the EPON device uses FEC as defined in the [802.3ah] clause 65.2 for EPON. When noFECEnabled(1) the devi… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.5 | Columnh3cEponDeviceObjectOamMode | read-write | current | This variable defines and provides information on the Operation Administration and Maintenance (OAM) mode of an EPON device as defined by the [802.3ah] clause … |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.6 | Columnh3cEponDeviceObjectDeviceReadyMode | read-write | current | This variable defines the mode of an EPON device and provides information on the mode in initialization - ready for registration as defined by the [802.3ah] cl… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.7 | Columnh3cEponDeviceObjectPowerDown | read-write | current | Setting this variable to True(1) will cause Device to be entered into Power down mode where no registration is allowed and only receiving data from the link. W… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.8 | Columnh3cEponDeviceObjectNumberOfLLIDs | read-only | current | A read only variable which defines the number of registered LLIDs (as defined by the [802.3ah] clause 65) in a EPON network for an OLT and an ONU. Initializati… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.9 | Columnh3cEponDeviceObjectReportThreshold | read-write | current | A set of 8 integers, for each LLID, that defines the threshold reporting for each Queue in the REPORT message, as defined in [802.3ah] 64. First Queue set repo… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.1.1.10 | Columnh3cEponDeviceRemoteMACAddressLLIDControl | read-write | current | Indicates and controls the resetting of the LLID MAC address log. Setting this object to none(1) has no action resetLog(2) empties the LLID MAC address log. Al… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.2 | Tableh3cEponDeviceRemoteMACAddressLLIDTable | not-accessible | current | A table of read-only value that identifies the source_address and LLIDs parameter of the remote devices in the network. This MacAddress value, as defined in [8… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.2.1 | Rowh3cEponDeviceRemoteMACAddressLLIDEntry | not-accessible | current | A group of entries. Applications create and delete entries using h3cEponDeviceRMadlEntryStatus. When adding objects to an LLID they are added in the persistent… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.2.1.1 | Columnh3cEponDeviceRemoteMACAddressLLIDName | read-create | current | A locally-unique, administratively assigned name for a group of entries. |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.2.1.2 | Columnh3cEponDeviceRMadlLLID | read-create | current | An arbitrary integer for the purpose of identifying the LLID. Writing can be done all the time. |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.2.1.3 | Columnh3cEponDeviceRMadlLogID | read-create | current | The object identifier of a MIB module object to add to an entry, indicating the entry ID in the table. Writing can be done all the time. |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.2.1.4 | Columnh3cEponDeviceRMadlRemoteAddress | read-create | current | The remote MAC address of the LLID. Writing can be done all the time. |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.2.1.5 | Columnh3cEponDeviceRMadlType | read-create | current | A list of types for entries - LLIDs. Indicates and defines the state of registration. notRegister(1) marks a non registered LID, registered(2) marks a register… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.2.1.6 | Columnh3cEponDeviceRMadlAction | read-create | current | A list of actions for an entry - LLID. Indicates and defines the state of registration for the remote device. none(1) marks no action, register(2) marks to reg… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.1.2.1.7 | Columnh3cEponDeviceRMadlEntryStatus | read-create | current | The control that allows creation and deletion of entries. Once made active an entry MAY not be modified except to delete it. |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.2 | Nodeh3cEponDeviceStatObjects | |||
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.2.1 | Tableh3cEponDeviceStatTable | not-accessible | current | This table defines the list of statistics counters of EPON devices. The attributes are relevant for an OLT and an ONU. |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.2.1.1 | Rowh3cEponDeviceStatEntry | not-accessible | current | Table entries for Table of statistics counters of EPON devices. |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.2.1.1.1 | Columnh3cEponDeviceStatTxFramesQueue0 | read-only | current | A count of the number of times a -Queue-0- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-0-.… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.2.1.1.2 | Columnh3cEponDeviceStatTxFramesQueue1 | read-only | current | A count of the number of times a -Queue-1- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-1-.… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.2.1.1.3 | Columnh3cEponDeviceStatTxFramesQueue2 | read-only | current | A count of the number of times a -Queue-2- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-2-.… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.2.1.1.4 | Columnh3cEponDeviceStatTxFramesQueue3 | read-only | current | A count of the number of times a -Queue-3- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-3-.… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.2.1.1.5 | Columnh3cEponDeviceStatTxFramesQueue4 | read-only | current | A count of the number of times a -Queue-4- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-4-.… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.2.1.1.6 | Columnh3cEponDeviceStatTxFramesQueue5 | read-only | current | A count of the number of times a -Queue-5- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-5-.… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.2.1.1.7 | Columnh3cEponDeviceStatTxFramesQueue6 | read-only | current | A count of the number of times a -Queue-6- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-6-.… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.2.1.1.8 | Columnh3cEponDeviceStatTxFramesQueue7 | read-only | current | A count of the number of times a -Queue-7- frames transmission occurs. Increment the counter by one for each frame transmitted which is an output of -Queue-7-.… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.2.1.1.9 | Columnh3cEponDeviceStatRxFramesQueue0 | read-only | current | A count of the number of times a -Queue-0- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.2.1.1.10 | Columnh3cEponDeviceStatRxFramesQueue1 | read-only | current | A count of the number of times a -Queue-1- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.2.1.1.11 | Columnh3cEponDeviceStatRxFramesQueue2 | read-only | current | A count of the number of times a -Queue-2- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.2.1.1.12 | Columnh3cEponDeviceStatRxFramesQueue3 | read-only | current | A count of the number of times a -Queue-3- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.2.1.1.13 | Columnh3cEponDeviceStatRxFramesQueue4 | read-only | current | A count of the number of times a -Queue-4- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.2.1.1.14 | Columnh3cEponDeviceStatRxFramesQueue5 | read-only | current | A count of the number of times a -Queue-5- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.2.1.1.15 | Columnh3cEponDeviceStatRxFramesQueue6 | read-only | current | A count of the number of times a -Queue-6- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.2.1.1.16 | Columnh3cEponDeviceStatRxFramesQueue7 | read-only | current | A count of the number of times a -Queue-7- frames reception occurs. A single counter at the ONU and a set of counters, one for each LLID, at the OLT. Increment… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.2.1.1.17 | Columnh3cEponDeviceStatDroppedFramesQueue0 | read-only | current | A count of the number of times a -Queue-0- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-0-. The -Queue-0- marking match… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.2.1.1.18 | Columnh3cEponDeviceStatDroppedFramesQueue1 | read-only | current | A count of the number of times a -Queue-1- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-1-. The -Queue-1- marking match… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.2.1.1.19 | Columnh3cEponDeviceStatDroppedFramesQueue2 | read-only | current | A count of the number of times a -Queue-2- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-2-. The -Queue-2- marking match… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.2.1.1.20 | Columnh3cEponDeviceStatDroppedFramesQueue3 | read-only | current | A count of the number of times a -Queue-3- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-3-. The -Queue-3- marking match… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.2.1.1.21 | Columnh3cEponDeviceStatDroppedFramesQueue4 | read-only | current | A count of the number of times a -Queue-4- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-4-. The -Queue-4- marking match… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.2.1.1.22 | Columnh3cEponDeviceStatDroppedFramesQueue5 | read-only | current | A count of the number of times a -Queue-5- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-5-. The -Queue-5- marking match… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.2.1.1.23 | Columnh3cEponDeviceStatDroppedFramesQueue6 | read-only | current | A count of the number of times a -Queue-6- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-6-. The -Queue-6- marking match… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.2.1.1.24 | Columnh3cEponDeviceStatDroppedFramesQueue7 | read-only | current | A count of the number of times a -Queue-7- frames drops occurs. Increment the counter by one for each frame dropped from -Queue-7-. The -Queue-7- marking match… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3 | Nodeh3cEponDeviceEventObjects | |||
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1 | Tableh3cEponDeviceEventObjectTable | not-accessible | current | This table defines the Event Objects for EPON devices. The attributes are relevant for an OLT and an ONU. |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1 | Rowh3cEponDeviceEventObjectEntry | not-accessible | current | Table entries for Table of Event objects for EPON devices. |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.1 | Columnh3cEponDeviceSampleMinimum | read-write | current | The minimum Frequency of events this system will accept. A system may use the larger values of this minimum to lessen the impact of constant sampling. For larg… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.2 | Columnh3cEponDeviceDyingGaspAlarmState | read-only | current | A read-only variable, which defines the state of the Dying Gasp indication of the OAM alarm indications as described in the [802.3ah] clause 57. When true the … |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.3 | Columnh3cEponDeviceDyingGaspAlarmEnabled | read-write | current | A control to allow DyingGaspAlarm event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can … |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.4 | Columnh3cEponDeviceCriticalEventState | read-only | current | A read-only variable, which defines the state of the Critical Event indication of the OAM alarm indications as described in the [802.3ah] clause 57. When true … |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.5 | Columnh3cEponDeviceCriticalEventEnabled | read-write | current | A control to allow CriticalEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can b… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.6 | Columnh3cEponDeviceLocalLinkFaultAlarmState | read-only | current | A read-only variable, which defines the state of the Local Link Fault indication of the OAM alarm indications as described in the [802.3ah] clause 57. When tru… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.7 | Columnh3cEponDeviceLocalLinkFaultAlarmEnabled | read-write | current | A control to allow LocalLinkFaultAlarm event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.8 | Columnh3cEponDeviceTemperatureEventIndicationState | read-only | current | A read-only variable, which defines the state of the Temperature Event indication of an EPON device. When condition of box temperature is above the threshold d… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.9 | Columnh3cEponDeviceTemperatureEventIndicationEnabled | read-write | current | A control to allow TemperatureEventIndication event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. … |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.10 | Columnh3cEponDevicePowerVoltageEventIndicationState | read-only | current | A read-only variable, which defines the state of the Power/Voltage Event Indication of an EPON device. When condition of box Power/voltage is above the thresho… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.11 | Columnh3cEponDevicePowerVoltageEventIndicationEnabled | read-write | current | A control to allow PowerVoltageEventIndication event to be used. When the value is true the event is sampled. When the value is false the event is not sampled.… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.12 | Columnh3cEponDeviceGlobalEventState | read-only | current | A read-only variable, which defines the state of the Global Event indication of an EPON device. When the indication of the event input occurs the event is asse… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.13 | Columnh3cEponDeviceGlobalEventEnabled | read-write | current | A control to allow GlobalEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing can be … |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.14 | Columnh3cEponDeviceErroredSymbolPeriodEventState | read-only | current | A read-only variable, which defines the state of the Errored Symbol Period Event indication of the OAM alarm TLV indications as described in the [802.3ah] clau… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.15 | Columnh3cEponDeviceErroredSymbolPeriodEventEnabled | read-write | current | A control to allow ErroredSymbolPeriodEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Wr… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.16 | Columnh3cEponDeviceErroredFrameEventState | read-only | current | A read-only variable, which defines the state of the Errored Frame Event indication of the OAM alarm TLV indications as described in the [802.3ah] clause 57.5.… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.17 | Columnh3cEponDeviceErroredFrameEventEnabled | read-write | current | A control to allow ErroredFrameEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Writing c… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.18 | Columnh3cEponDeviceErroredFramePeriodEventState | read-only | current | A read-only variable, which defines the state of the Errored Frame Period Event indication of the OAM alarm TLV indications as described in the [802.3ah] claus… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.19 | Columnh3cEponDeviceErroredFramePeriodEventEnabled | read-write | current | A control to allow ErroredFramePeriodEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. Wri… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.20 | Columnh3cEponDeviceErroredFrameSecondsSummaryEventState | read-only | current | A read-only variable, which defines the state of the Errored Frame Seconds Summary Event indication of the OAM alarm TLV indications as described in the [802.3… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.21 | Columnh3cEponDeviceErroredFrameSecondsSummaryEventEnabled | read-write | current | A control to allow ErroredFrameSecondsSummaryEvent event to be used. When the value is true the event is sampled. When the value is false the event is not samp… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.22 | Columnh3cEponDeviceOrganizationSpecificEventState | read-only | current | A read-only variable, which defines the state of the Organization Specific Event indication of the OAM alarm TLV indications as described in the [802.3ah] clau… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.23 | Columnh3cEponDeviceOrganizationSpecificEventEnabled | read-write | current | A control to allow OrganizationSpecificEvent event to be used. When the value is true the event is sampled. When the value is false the event is not sampled. W… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.1.1.24 | Columnh3cEponDeviceEventControl | read-write | current | Indicates and controls the resetting of the Event log. Setting this object to none(1) has no action resetLog(2) empties the event log. All data is deleted. Set… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.2 | Tableh3cEponDeviceEventsLogTable | not-accessible | current | A table of objects provides a log of notification based on the event as pointed to by entries in those tables. The intent is a MAC level event log (set of even… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.2.1 | Rowh3cEponDeviceEventsLogEntry | not-accessible | current | A group of Events. Applications create and delete entries using h3cEponDeviceEventsEntryStatus. When adding objects to a notification they are added in the lex… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.2.1.1 | Columnh3cEponDeviceEventsLogName | not-accessible | current | A locally-unique, administratively assigned name for a group of Events. |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.2.1.2 | Columnh3cEponDeviceEventsLogIndex | not-accessible | current | An arbitrary integer for the purpose of identifying individual Events within a h3cEponDeviceEventsLogName group. Events within a group are placed in the notifi… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.2.1.3 | Columnh3cEponDeviceEventsLogID | read-create | current | The object identifier of a MIB module object to add to a Notification that results from the event. Writing can be done all the time. |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.2.1.4 | Columnh3cEponDeviceEventsLogFirstTime | read-only | current | The time that an entry was created. |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.2.1.5 | Columnh3cEponDeviceEventsLogLastTime | read-only | current | If multiple events are reported via the same entry, the time that the last event for this entry occurred, otherwise this should have the same value as h3cEponD… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.2.1.6 | Columnh3cEponDeviceEventsLogCounts | read-only | current | The number of consecutive event instances reported by this entry. This starts at 1 with the creation of this row and increments by 1 for each subsequent duplic… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.2.1.7 | Columnh3cEponDeviceEventsLogType | read-only | current | A list of types for Events. Events are ordered according to their significance where 1 is the highest severity. h3cEponDeviceDyingGaspAlarmState(1) indicates a… |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.1.3.2.1.8 | Columnh3cEponDeviceEventsLogEntryStatus | read-create | current | The control that allows creation and deletion of entries. Once made active an entry MAY not be modified except to delete it. |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.2 | Nodeh3cEponDeviceConformance | |||
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.2.1 | Nodeh3cEponDeviceGroups | |||
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.2.1.1 | Grouph3cEponDeviceGroupControl | current | A collection of objects of h3cEponDevice control definition. | |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.2.1.2 | Grouph3cEponDeviceGroupRMadLTable | current | A collection of objects of h3cEponDevice remote Mac address to LLID table. | |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.2.1.3 | Grouph3cEponDeviceGroupStat | current | A collection of objects of EPON device Statistics | |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.2.1.4 | Grouph3cEponDeviceGroupEvent | current | A collection of objects for EPON device Events | |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.2.1.5 | Grouph3cEponDeviceGroupEventLog | current | A collection of objects for EPON device Events log | |
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.2.2 | Nodeh3cEponDeviceCompliances | |||
| 1.3.6.1.4.1.43.45.1.10.2.42.4.1.2.2.1 | Complianceh3cEponDeviceCompliance | current | The compliance statement for EPON Devices. |