A3COM-HUAWEI-MPLS-BGP-VPN-MIB
51 objects
This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS)/Border Gateway Protocol (BGP) Virtual Private Networks (VPNs) as defined in : Rosen, E., Viswanathan, A., and R. Callon, Multiprotocol Label Switching Architecture, Internet Draft <draft-ietf-mpls-arch-06.txt>, August 1999.
Imported Objects
| A3COM-HUAWEI-OID-MIB | huaweiMgmt hwMpls |
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 experimental Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus StorageType TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.45.1.5.12.3 | IdentityhwMplsVpn | This MIB contains managed object definitions for the Multiprotocol Label Switching (MPLS)/Border Gateway Protocol (BGP) Virtual Private Networks (VPNs) as defi… | ||
| 1.3.6.1.4.1.43.45.1.5.12.3.1 | NodemplsVpnObjects | |||
| 1.3.6.1.4.1.43.45.1.5.12.3.1.1 | NodemplsVpnScalars | |||
| 1.3.6.1.4.1.43.45.1.5.12.3.1.1.1 | ScalarmplsVpnConfiguredVrfs | read-only | current | The number of VRFs which are configured on this node. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.1.2 | ScalarmplsVpnActiveVrfs | read-only | current | The number of VRFs which are active on this node. That is, those whose operStatus = Up (1). |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2 | NodemplsVpnConf | |||
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.1 | TablemplsVpnInterfaceConfTable | not-accessible | current | This table specifies per-interface MPLS capability and associated information. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.1.1 | RowmplsVpnInterfaceConfEntry | not-accessible | current | An entry in this table is created by an LSR for every interface capable of supporting MPLS/BGP VPN. Each entry in this table is meant to correspond to an entry… |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.1.1.1 | ColumnmplsVpnInterfaceConfIndex | read-only | current | This is a unique index for an entry in the MplsVPNInterfaceConfTable. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.1.1.2 | ColumnmplsVpnInterfaceLabelEdgeType | read-only | current | Either the providerEdge(1) (PE) or customerEdge(2) (CE) bit MUST be set. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.1.1.3 | ColumnmplsVpnInterfaceVpnClassification | read-only | current | Denotes whether this link participates in a carrier-of-carrier's, enterprise, or inter-provider scenario. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.1.1.4 | ColumnmplsVpnInterfaceIpAddress | read-create | current | The IP address of this interface. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.1.1.5 | ColumnmplsVpnInterfaceIpAddressMask | read-create | current | The IP address mask of this interface. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.1.1.6 | ColumnmplsVpnInterfaceConfRowStatus | read-create | current | The row status for this entry. This value is used to create a row in this table, signifying that the specified interface is to be associated with the specified… |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.2 | TablemplsVpnVrfConfTable | not-accessible | current | This table specifies per-interface MPLS/BGP VPN VRF Table capability and associated information. Entries in this table define VRF routing instances associated … |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.2.1 | RowmplsVpnVrfConfEntry | not-accessible | current | An entry in this table is created by an LSR for every VRF capable of supporting MPLS/BGP VPN. The indexing provides an ordering of VRFs per-VPN interface. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.2.1.1 | ColumnmplsVpnVrfName | read-only | current | The human-readable name of this VPN. This MAY be equivalent to the RFC2685 VPN-ID. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.2.1.2 | ColumnmplsVpnVrfRouteDistinguisher | read-create | current | The route distinguisher for this VRF. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.2.1.3 | ColumnmplsVpnVrfNetPrefixType | read-only | current | Denotes the type network prefix in use for the PE-CE connections. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.2.1.4 | ColumnmplsVpnVrfNetPrefix | read-only | current | Denotes the network prefix for the PE-CE connections. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.2.1.5 | ColumnmplsVpnVrfIpRouteRedistributeConn | read-create | current | Denotes the redistribution of directly connected networks into the VRF BGP table. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.2.1.6 | ColumnmplsVpnVrfIpRouteRedistributeStatic | read-create | current | Denotes the redistribution of static routes into the VRF BGP table. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.2.1.7 | ColumnmplsVpnVrfIpRouteRedistributeRip | read-create | current | Denotes the redistribution of rip routes into the VRF BGP table. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.2.1.8 | ColumnmplsVpnVrfConfHighRouteThreshold | read-create | current | Denotes high-level water marker for the number of routes which this VRF may hold. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.2.1.9 | ColumnmplsVpnVrfConfIsWarnOnly | read-create | current | Denotes the action when the amount of VPN's routes exceed the mplsVpnVrfConfHighRouteThreshold. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.2.1.10 | ColumnmplsVpnVrfConfMaxRoutes | read-create | current | Denotes maximum number of routes which this VRF is configured to hold. This value MUST be less than or equal to mplsVrfMaxPossibleRoutes unless it is set to 0. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.2.1.11 | ColumnmplsVpnVrfConfRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.3 | TablemplsVpnVrfRouteTargetTable | not-accessible | current | This table specifies per-VRF route target association. Each entry identifies a connectivity policy supported as part of a VPN. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.3.1 | RowmplsVpnVrfRouteTargetEntry | not-accessible | current | An entry in this table is created by an LSR for each route target configured for a VRF supporting a MPLS/BGP VPN instance. The indexing provides an ordering pe… |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.3.1.1 | ColumnmplsVpnVrfRouteTarget | read-only | current | The route target distribution policy. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.3.1.2 | ColumnmplsVpnVrfRouteTargetType | read-only | current | The route target export distribution type. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.3.1.3 | ColumnmplsVpnVrfRouteTargetRowStatus | read-create | current | Row status for this entry. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.4 | TablemplsVpnVrfBgpNbrAddrTable | not-accessible | current | This table specifies per-interface MPLS/BGP neighbor addresses for both PEs and CEs. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.4.1 | RowmplsVpnVrfBgpNbrAddrEntry | not-accessible | current | An entry in this table is created by an LSR for every VRF capable of supporting MPLS/BGP VPN. The indexing provides an ordering of VRFs per-VPN interface. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.4.1.1 | ColumnmplsVpnVrfBgpNbrAddr | read-only | current | Denotes the BGP neighbor address. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.4.1.2 | ColumnmplsVpnVrfBgpNbrRole | read-create | current | Denotes the role played by this BGP neighbor with respect to this VRF. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.4.1.3 | ColumnmplsVpnVrfBgpNbrType | read-create | current | Denotes the address family of the PE address. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.4.1.4 | ColumnmplsVpnVrfBgpNbrAsNumber | read-create | current | The Automonous System that the BGP's neighbour in. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.4.1.5 | ColumnmplsVpnVrfBgpNbrAdminStatus | read-create | current | The action set by SNMP client. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.2.4.1.6 | ColumnmplsVpnVrfBgpNbrRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.3 | NodemplsVpnRoute | |||
| 1.3.6.1.4.1.43.45.1.5.12.3.1.3.1 | TablemplsVpnVrfRouteTable | not-accessible | current | This table specifies per-interface MPLS/BGP VPN VRF Table routing information. Entries in this table define VRF routing entries associated with the specified M… |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.3.1.1 | RowmplsVpnVrfRouteEntry | not-accessible | current | An entry in this table is created by an LSR for every route present configured (either dynamically or statically) within the context of a specific VRF capable … |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.3.1.1.1 | ColumnmplsVpnVrfRouteDest | read-only | current | The destination IP address of this route. This object may not take a Multicast (Class D) address value. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.3.1.1.2 | ColumnmplsVpnVrfRouteMask | read-create | current | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the mplsVpnVrfRouteDest field. For those systems that … |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.3.1.1.3 | ColumnmplsVpnVrfRouteNextHop | read-only | current | On remote routes, the address of the next system en route; Otherwise, 0.0.0.0. . |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.3.1.1.4 | ColumnmplsVpnVrfRouteIfIndex | read-create | current | The ifIndex value that identifies the local interface through which the next hop of this route should be reached. |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.3.1.1.5 | ColumnmplsVpnVrfRouteProto | read-create | current | The routing mechanism via which this route was learned. Inclusion of values for gateway rout- ing protocols is not intended to imply that hosts should support … |
| 1.3.6.1.4.1.43.45.1.5.12.3.1.3.1.1.6 | ColumnmplsVpnVrfRouteRowStatus | read-create | current | Row status for this table. It is used according to row installation and removal conventions. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MplsVpnId | OCTET STRING(SIZE (0..31)) | current | An identifier that is assigned to each MPLS/BGP VPN and is used to uniquely identify it. This is assigned by the system operator or NMS and SHOULD be unique throughout the MPLS domain. If this is the case, then this ide… |
| MplsVpnRouteDistinguisher | OCTET STRING(SIZE (0..256)) | current | Syntax for a route distinguisher and route target. |