ENTITY-MIB
68 objects
The MIB module for representing multiple logical entities supported by a single SNMP agent. Copyright (C) The Internet Society (2005). This version of this MIB module is part of RFC 4133; see the RFC itself for full legal notices.
Imported Objects
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | AutonomousType DateAndTime RowPointer TAddress TDomain TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.47 | IdentityentityMIB | The MIB module for representing multiple logical entities supported by a single SNMP agent. Copyright (C) The Internet Society (2005). This version of this MIB… | ||
| 1.3.6.1.2.1.47.1 | NodeentityMIBObjects | |||
| 1.3.6.1.2.1.47.1.1 | NodeentityPhysical | |||
| 1.3.6.1.2.1.47.1.1.1 | TableentPhysicalTable | not-accessible | current | This table contains one row per physical entity. There is always at least one row for an 'overall' physical entity. |
| 1.3.6.1.2.1.47.1.1.1.1 | RowentPhysicalEntry | not-accessible | current | Information about a particular physical entity. Each entry provides objects (entPhysicalDescr, entPhysicalVendorType, and entPhysicalClass) to help an NMS iden… |
| 1.3.6.1.2.1.47.1.1.1.1.1 | ColumnentPhysicalIndex | not-accessible | current | The index for this entry. |
| 1.3.6.1.2.1.47.1.1.1.1.2 | ColumnentPhysicalDescr | read-only | current | A textual description of physical entity. This object should contain a string that identifies the manufacturer's name for the physical entity, and should be se… |
| 1.3.6.1.2.1.47.1.1.1.1.3 | ColumnentPhysicalVendorType | read-only | current | An indication of the vendor-specific hardware type of the physical entity. Note that this is different from the definition of MIB-II's sysObjectID. An agent sh… |
| 1.3.6.1.2.1.47.1.1.1.1.4 | ColumnentPhysicalContainedIn | read-only | current | The value of entPhysicalIndex for the physical entity which 'contains' this physical entity. A value of zero indicates this physical entity is not contained in… |
| 1.3.6.1.2.1.47.1.1.1.1.5 | ColumnentPhysicalClass | read-only | current | An indication of the general hardware type of the physical entity. An agent should set this object to the standard enumeration value that most accurately indic… |
| 1.3.6.1.2.1.47.1.1.1.1.6 | ColumnentPhysicalParentRelPos | read-only | current | An indication of the relative position of this 'child' component among all its 'sibling' components. Sibling components are defined as entPhysicalEntries that … |
| 1.3.6.1.2.1.47.1.1.1.1.7 | ColumnentPhysicalName | read-only | current | The textual name of the physical entity. The value of this object should be the name of the component as assigned by the local device and should be suitable fo… |
| 1.3.6.1.2.1.47.1.1.1.1.8 | ColumnentPhysicalHardwareRev | read-only | current | The vendor-specific hardware revision string for the physical entity. The preferred value is the hardware revision identifier actually printed on the component… |
| 1.3.6.1.2.1.47.1.1.1.1.9 | ColumnentPhysicalFirmwareRev | read-only | current | The vendor-specific firmware revision string for the physical entity. Note that if revision information is stored internally in a non-printable (e.g., binary) … |
| 1.3.6.1.2.1.47.1.1.1.1.10 | ColumnentPhysicalSoftwareRev | read-only | current | The vendor-specific software revision string for the physical entity. Note that if revision information is stored internally in a non-printable (e.g., binary) … |
| 1.3.6.1.2.1.47.1.1.1.1.11 | ColumnentPhysicalSerialNum | read-write | current | The vendor-specific serial number string for the physical entity. The preferred value is the serial number string actually printed on the component itself (if … |
| 1.3.6.1.2.1.47.1.1.1.1.12 | ColumnentPhysicalMfgName | read-only | current | The name of the manufacturer of this physical component. The preferred value is the manufacturer name string actually printed on the component itself (if prese… |
| 1.3.6.1.2.1.47.1.1.1.1.13 | ColumnentPhysicalModelName | read-only | current | The vendor-specific model name identifier string associated with this physical component. The preferred value is the customer-visible part number, which may be… |
| 1.3.6.1.2.1.47.1.1.1.1.14 | ColumnentPhysicalAlias | read-write | current | This object is an 'alias' name for the physical entity, as specified by a network manager, and provides a non-volatile 'handle' for the physical entity. On the… |
| 1.3.6.1.2.1.47.1.1.1.1.15 | ColumnentPhysicalAssetID | read-write | current | This object is a user-assigned asset tracking identifier (as specified by a network manager) for the physical entity, and provides non-volatile storage of this… |
| 1.3.6.1.2.1.47.1.1.1.1.16 | ColumnentPhysicalIsFRU | read-only | current | This object indicates whether or not this physical entity is considered a 'field replaceable unit' by the vendor. If this object contains the value 'true(1)' t… |
| 1.3.6.1.2.1.47.1.1.1.1.17 | ColumnentPhysicalMfgDate | read-only | current | This object contains the date of manufacturing of the managed entity. If the manufacturing date is unknown or not supported, the object is not instantiated. Th… |
| 1.3.6.1.2.1.47.1.1.1.1.18 | ColumnentPhysicalUris | read-write | current | This object contains additional identification information about the physical entity. The object contains URIs and, therefore, the syntax of this object must c… |
| 1.3.6.1.2.1.47.1.2 | NodeentityLogical | |||
| 1.3.6.1.2.1.47.1.2.1 | TableentLogicalTable | not-accessible | current | This table contains one row per logical entity. For agents that implement more than one naming scope, at least one entry must exist. Agents which instantiate a… |
| 1.3.6.1.2.1.47.1.2.1.1 | RowentLogicalEntry | not-accessible | current | Information about a particular logical entity. Entities may be managed by this agent or other SNMP agents (possibly) in the same chassis. |
| 1.3.6.1.2.1.47.1.2.1.1.1 | ColumnentLogicalIndex | not-accessible | current | The value of this object uniquely identifies the logical entity. The value should be a small positive integer; index values for different logical entities are … |
| 1.3.6.1.2.1.47.1.2.1.1.2 | ColumnentLogicalDescr | read-only | current | A textual description of the logical entity. This object should contain a string that identifies the manufacturer's name for the logical entity, and should be … |
| 1.3.6.1.2.1.47.1.2.1.1.3 | ColumnentLogicalType | read-only | current | An indication of the type of logical entity. This will typically be the OBJECT IDENTIFIER name of the node in the SMI's naming hierarchy which represents the m… |
| 1.3.6.1.2.1.47.1.2.1.1.4 | ColumnentLogicalCommunity | read-only | deprecated | An SNMPv1 or SNMPv2C community-string, which can be used to access detailed management information for this logical entity. The agent should allow read access … |
| 1.3.6.1.2.1.47.1.2.1.1.5 | ColumnentLogicalTAddress | read-only | current | The transport service address by which the logical entity receives network management traffic, formatted according to the corresponding value of entLogicalTDom… |
| 1.3.6.1.2.1.47.1.2.1.1.6 | ColumnentLogicalTDomain | read-only | current | Indicates the kind of transport service by which the logical entity receives network management traffic. Possible values for this object are presently found in… |
| 1.3.6.1.2.1.47.1.2.1.1.7 | ColumnentLogicalContextEngineID | read-only | current | The authoritative contextEngineID that can be used to send an SNMP message concerning information held by this logical entity, to the address specified by the … |
| 1.3.6.1.2.1.47.1.2.1.1.8 | ColumnentLogicalContextName | read-only | current | The contextName that can be used to send an SNMP message concerning information held by this logical entity, to the address specified by the associated 'entLog… |
| 1.3.6.1.2.1.47.1.3 | NodeentityMapping | |||
| 1.3.6.1.2.1.47.1.3.1 | TableentLPMappingTable | not-accessible | current | This table contains zero or more rows of logical entity to physical equipment associations. For each logical entity known by this agent, there are zero or more… |
| 1.3.6.1.2.1.47.1.3.1.1 | RowentLPMappingEntry | not-accessible | current | Information about a particular logical entity to physical equipment association. Note that the nature of the association is not specifically identified in this… |
| 1.3.6.1.2.1.47.1.3.1.1.1 | ColumnentLPPhysicalIndex | read-only | current | The value of this object identifies the index value of a particular entPhysicalEntry associated with the indicated entLogicalEntity. |
| 1.3.6.1.2.1.47.1.3.2 | TableentAliasMappingTable | not-accessible | current | This table contains zero or more rows, representing mappings of logical entity and physical component to external MIB identifiers. Each physical port in the sy… |
| 1.3.6.1.2.1.47.1.3.2.1 | RowentAliasMappingEntry | not-accessible | current | Information about a particular physical equipment, logical entity to external identifier binding. Each logical entity/physical component pair may be associated… |
| 1.3.6.1.2.1.47.1.3.2.1.1 | ColumnentAliasLogicalIndexOrZero | not-accessible | current | The value of this object identifies the logical entity that defines the naming scope for the associated instance of the 'entAliasMappingIdentifier' object. If … |
| 1.3.6.1.2.1.47.1.3.2.1.2 | ColumnentAliasMappingIdentifier | read-only | current | The value of this object identifies a particular conceptual row associated with the indicated entPhysicalIndex and entLogicalIndex pair. Because only physical … |
| 1.3.6.1.2.1.47.1.3.3 | TableentPhysicalContainsTable | not-accessible | current | A table that exposes the container/'containee' relationships between physical entities. This table provides all the information found by constructing the virtu… |
| 1.3.6.1.2.1.47.1.3.3.1 | RowentPhysicalContainsEntry | not-accessible | current | A single container/'containee' relationship. |
| 1.3.6.1.2.1.47.1.3.3.1.1 | ColumnentPhysicalChildIndex | read-only | current | The value of entPhysicalIndex for the contained physical entity. |
| 1.3.6.1.2.1.47.1.4 | NodeentityGeneral | |||
| 1.3.6.1.2.1.47.1.4.1 | ScalarentLastChangeTime | read-only | current | The value of sysUpTime at the time a conceptual row is created, modified, or deleted in any of these tables: - entPhysicalTable - entLogicalTable - entLPMappin… |
| 1.3.6.1.2.1.47.2 | NodeentityMIBTraps | |||
| 1.3.6.1.2.1.47.2.0 | NodeentityMIBTrapPrefix | |||
| 1.3.6.1.2.1.47.2.0.1 | NotificationentConfigChange | current | An entConfigChange notification is generated when the value of entLastChangeTime changes. It can be utilized by an NMS to trigger logical/physical entity table… | |
| 1.3.6.1.2.1.47.3 | NodeentityConformance | |||
| 1.3.6.1.2.1.47.3.1 | NodeentityCompliances | |||
| 1.3.6.1.2.1.47.3.1.1 | ComplianceentityCompliance | deprecated | The compliance statement for SNMP entities that implement version 1 of the Entity MIB. | |
| 1.3.6.1.2.1.47.3.1.2 | Complianceentity2Compliance | not-accessible | deprecated | The compliance statement for SNMP entities that implement version 2 of the Entity MIB. |
| 1.3.6.1.2.1.47.3.1.3 | Complianceentity3Compliance | not-accessible | current | The compliance statement for SNMP entities that implement version 3 of the Entity MIB. |
| 1.3.6.1.2.1.47.3.2 | NodeentityGroups | |||
| 1.3.6.1.2.1.47.3.2.1 | GroupentityPhysicalGroup | current | The collection of objects used to represent physical system components, for which a single agent provides management information. | |
| 1.3.6.1.2.1.47.3.2.2 | GroupentityLogicalGroup | deprecated | The collection of objects used to represent the list of logical entities, for which a single agent provides management information. | |
| 1.3.6.1.2.1.47.3.2.3 | GroupentityMappingGroup | current | The collection of objects used to represent the associations between multiple logical entities, physical components, interfaces, and port identifiers, for whic… | |
| 1.3.6.1.2.1.47.3.2.4 | GroupentityGeneralGroup | current | The collection of objects used to represent general entity information, for which a single agent provides management information. | |
| 1.3.6.1.2.1.47.3.2.5 | GroupentityNotificationsGroup | current | The collection of notifications used to indicate Entity MIB data consistency and general status information. | |
| 1.3.6.1.2.1.47.3.2.6 | GroupentityPhysical2Group | current | The collection of objects used to represent physical system components, for which a single agent provides management information. This group augments the objec… | |
| 1.3.6.1.2.1.47.3.2.7 | GroupentityLogical2Group | current | The collection of objects used to represent the list of logical entities, for which a single SNMP entity provides management information. | |
| 1.3.6.1.2.1.47.3.2.8 | GroupentityPhysical3Group | current | The collection of objects used to represent physical system components, for which a single agent provides management information. This group augments the objec… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PhysicalClass | INTEGER { other(1), unknown(2), chassis(3), backplane(4), container(5), powerSupply(6), fan(7), sensor(8), module(9), port(10), stack(11), cpu(12) } | current | An enumerated value which provides an indication of the general hardware type of a particular physical entity. There are no restrictions as to the number of entPhysicalEntries of each entPhysicalClass, which must be ins… |
| PhysicalIndex | Integer32 (1..2147483647) | current | An arbitrary value that uniquely identifies the physical entity. The value should be a small, positive integer. Index values for different physical entities are not necessarily contiguous. |
| PhysicalIndexOrZero | Integer32 (0..2147483647) | current | This textual convention is an extension of the PhysicalIndex convention, which defines a greater than zero value used to identify a physical entity. This extension permits the additional value of zero. The semantics of … |
| SnmpEngineIdOrNone | OCTET STRING (SIZE(0..32)) | current | A specially formatted SnmpEngineID string for use with the Entity MIB. If an instance of an object of SYNTAX SnmpEngineIdOrNone has a non-zero length, then the object encoding and semantics are defined by the SnmpEngine… |