A3COM-HUAWEI-NQA-MIB
203 objects
The private mib file includes the test information of the device. It is supplementary for rfc2925.txt.
Imported Objects
| A3COM-HUAWEI-OID-MIB | huaweiDatacomm |
| DISMAN-PING-MIB | pingCtlDescr pingCtlEntry pingCtlOwnerIndex pingCtlTargetAddress pingCtlTargetAddressType pingCtlTestName pingCtlType |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.45.1.5.25.28 | IdentityhwNqa | The private mib file includes the test information of the device. It is supplementary for rfc2925.txt. | ||
| 1.3.6.1.4.1.43.45.1.5.25.28.1 | NodehwNqaObjects | |||
| 1.3.6.1.4.1.43.45.1.5.25.28.1.1 | ScalarhwNqaMIBVersion | read-only | current | Version string of this MIB. The format will be: 'Version.Release.Patch: Description' An instance likes: '1.0.0: Initial NQA MIB' |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.2 | TablehwNqaCtlTable | not-accessible | current | Defines the NQA Control Extend Table for providing, via SNMP, the capability of performing network analysis operations at a remote host. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.2.1 | RowhwNqaCtlEntry | not-accessible | current | Defines an entry in the hwNqaCtlTable. The operation of this table is same as that of pingResultsTable. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.1 | ColumnhwNqaCtlTargetPort | read-create | current | The destination port that may be used by udpEcho, tcpConnect and jitter probes. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.2 | ColumnhwNqaCtlSourcePort | read-create | current | The source port that may be used by all tests except for dns and dlsw. If no source port is specified, system will create a random port as source port. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.3 | ColumnhwNqaCtlTTL | read-create | current | Specifies the value to store in the TTL Field in the IP packet used to encapsulate the NQA probe. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.4 | ColumnhwNqaCtlJitterAdminInterval | read-create | current | Time value in milliseconds that is an interval between two continuous probes in jitter test. This object is only used by jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.5 | ColumnhwNqaCtlJitterAdminNumPackets | read-create | current | Packet number that specifys how many packets will be sent in one jitter test. This object is only used by jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.6 | ColumnhwNqaCtlHttpOperationType | read-create | current | Http operation type: get or post. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.7 | ColumnhwNqaCtlHttpOperationString | read-create | current | Http operation string. For example, if the http operation type is get, the string will be url, home page and http version. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.8 | ColumnhwNqaCtlFtpOperationType | read-create | current | Ftp operation type. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.9 | ColumnhwNqaCtlFtpUsername | read-create | current | Ftp username. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.10 | ColumnhwNqaCtlFtpPassword | read-create | current | Ftp password. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.11 | ColumnhwNqaCtlFtpOperationString | read-create | current | Ftp operation string. If the ftp operation type is get, the string must be the file name which will be gotten from ftp server. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.12 | ColumnhwNqaCtlVPNInstance | read-create | current | VPN name by which system finds route in the specified VPN to send NQA probe packets. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.13 | ColumnhwNqaCtlHistoryKeptTime | read-create | current | To indicate how long the history records will be saved in the pingProbeHistoryTable table after the test stopped. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.14 | ColumnhwNqaCtlHistoryEnable | read-create | current | |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.15 | ColumnhwNqaCtlICPIFAdvFactor | read-create | current | The advantage factor depends on the type of access and how the service is to be used. This object will be used while calculating the ICPIF (Calculated Planning… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.2.1.16 | ColumnhwNqaCtlCodecType | read-create | current | To indicate the codec type to be used with jitter probe. This is applicable only for the jitter probe. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.3 | TablehwNqaResultsTable | not-accessible | current | Defines the NQA Results Extend Table for providing the capability of performing NQA operations at a remote host. The results of these operations are stored in … |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.3.1 | RowhwNqaResultsEntry | not-accessible | current | The operation of this table is same as that of pingResultsTable. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.1 | ColumnhwNqaResultsRttNumDisconnects | read-only | current | The number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.2 | ColumnhwNqaResultsRttTimeouts | read-only | current | The number of times that a NQA probe failed because the probe timed out. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.3 | ColumnhwNqaResultsRttBusies | read-only | current | The number of times that a NQA probe failed because all NQA tasks have been running. If a new probe fails to start, the value of this object is incremented. Th… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.4 | ColumnhwNqaResultsRttNoConnections | read-only | current | The number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.5 | ColumnhwNqaResultsRttDrops | read-only | current | The number of times that a NQA operation failed to initiated for unavailibility of necessary internal resources. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.6 | ColumnhwNqaResultsRttSequenceErrors | read-only | current | The number of packets arrived out of sequence. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.7 | ColumnhwNqaResultsRttStatsErrors | read-only | current | The number of some other errors. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.8 | ColumnhwNqaResultsMaxDelaySD | read-only | current | The maximal delay from source device to destination device. Currently this value is only used for jitter test, and this value must be 0 in other type test. In … |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.9 | ColumnhwNqaResultsMaxDelayDS | read-only | current | The maximal delay from destination device to source device. Currently this value is only used for jitter test, and this value is 0 in other type test. In jitte… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.10 | ColumnhwNqaResultsLostPacketRatio | read-only | current | The value of this object reflects the drop rate of NQA test. For example, this value is 30 that means source device only had received 70% packets of total sent… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.11 | ColumnhwNqaResultsPacketLateArrival | read-only | current | The value of this object indicates the number of the packets that arrived after the timeout. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.12 | ColumnhwNqaResultsRttSum | read-only | current | The sum of round trip time. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.13 | ColumnhwNqaResultsNumOfDelaySD | read-only | current | The number of delay from source to destination that are successfully measured. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.14 | ColumnhwNqaResultsMinDelaySD | read-only | current | The minimum of all one way times from source to destination. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.15 | ColumnhwNqaResultsSumDelaySD | read-only | current | The sum of one way times from source to destination. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.16 | ColumnhwNqaResultsSum2DelaySD | read-only | current | The sum of squares of one way times from source to destination. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.17 | ColumnhwNqaResultsNumOfDelayDS | read-only | current | The number of delay from destination to source that are successfully measured. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.18 | ColumnhwNqaResultsMinDelayDS | read-only | current | The minimum of all one way times from destination to source. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.19 | ColumnhwNqaResultsSumDelayDS | read-only | current | The sum of one way times from destination to source. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.3.1.20 | ColumnhwNqaResultsSum2DelayDS | read-only | current | The sum of squares of one way times from destination to source. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4 | TablehwNqaJitterStatsTable | not-accessible | current | Statistics table for latest jitter activity. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1 | RowhwNqaJitterStatsEntry | not-accessible | current | An entry contains the statistics for the latest jitter activity. This entry is created only if the pingCtlType is hwNqajitter. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.1 | ColumnhwNqaJitterStatsNumOfRTT | read-only | current | The number of received destination device responses with which jitter test can reach round-trip time. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.2 | ColumnhwNqaJitterStatsMinOfPositivesSD | read-only | current | The value of time that records the minimal positive jitter value from source to destination in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.3 | ColumnhwNqaJitterStatsMaxOfPositivesSD | read-only | current | The value of time that records the maximal positive jitter value from source to destination in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.4 | ColumnhwNqaJitterStatsNumOfPositivesSD | read-only | current | The number that records positive jitter times from source to destination in the jitter test. The total number of the value of all positive jitters in packets s… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.5 | ColumnhwNqaJitterStatsSumOfPositivesSD | read-only | current | The value of time that records the sum of positive jitter values from source to destination in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.6 | ColumnhwNqaJitterStatsSum2PositivesSD | read-only | current | The value of time that records the sum of square of positive jitter values from source to destination in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.7 | ColumnhwNqaJitterStatsMinOfNegativesSD | read-only | current | The value of time that records the minimal absolute values of negative jitter value from source to destination in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.8 | ColumnhwNqaJitterStatsMaxOfNegativesSD | read-only | current | The value of time that records the maximal absolute values of negative jitter value from source to destination in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.9 | ColumnhwNqaJitterStatsNumOfNegativesSD | read-only | current | The number that records negative jitter times from source to destination in the jitter test. The total number of all negative jitter values in packets sent fro… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.10 | ColumnhwNqaJitterStatsSumOfNegativesSD | read-only | current | The value of time that records the sum of negative jitter values from source to destination in the jitter test. The total number of the value of all negative j… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.11 | ColumnhwNqaJitterStatsSum2NegativesSD | read-only | current | The value of time that records the sum of square of negative jitter values from source to destination in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.12 | ColumnhwNqaJitterStatsMinOfPositivesDS | read-only | current | The value of time that records the minimal positive jitter value from destination to source in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.13 | ColumnhwNqaJitterStatsMaxOfPositivesDS | read-only | current | The value of time that records the maximal positive jitter value from destination to source in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.14 | ColumnhwNqaJitterStatsNumOfPositivesDS | read-only | current | The number that records positive jitter times from destination to source in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.15 | ColumnhwNqaJitterStatsSumOfPositivesDS | read-only | current | The value of time that records the sum of positive jitter values from destination to source in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.16 | ColumnhwNqaJitterStatsSum2PositivesDS | read-only | current | The value of time that records the sum of square of positive jitter values from destination to source in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.17 | ColumnhwNqaJitterStatsMinOfNegativesDS | read-only | current | The value of time that records the minimal absolute values of negative jitter value from destination to source in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.18 | ColumnhwNqaJitterStatsMaxOfNegativesDS | read-only | current | The value of time that records the maximal absolute values of negative jitter value from destination to source in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.19 | ColumnhwNqaJitterStatsNumOfNegativesDS | read-only | current | The number that records negative jitter times from destination to source in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.20 | ColumnhwNqaJitterStatsSumOfNegativesDS | read-only | current | The value of time that records the sum of negative jitter values from destination to source in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.21 | ColumnhwNqaJitterStatsSum2NegativesDS | read-only | current | The value of time that records the sum of square of negative jitter values from destination to source in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.22 | ColumnhwNqaJitterStatsPacketLossSD | read-only | current | The lost packets number sent from source to destination. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.23 | ColumnhwNqaJitterStatsPacketLossDS | read-only | current | The lost packets number sent from destination to source. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.24 | ColumnhwNqaJitterStatsAvePositivesSD | read-only | current | The value of time that records the average positive jitter value from source to destination. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.25 | ColumnhwNqaJitterStatsAveNegativesSD | read-only | current | The value of time that records the average negative jitter value from source to destination. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.26 | ColumnhwNqaJitterStatsAvePositivesDS | read-only | current | The value of time that records the average positive jitter value from destination to source. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.27 | ColumnhwNqaJitterStatsAveNegativesDS | read-only | current | The value of time that records the average negative jitter value from destination to source. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.28 | ColumnhwNqaJitterStatsPktLossUnknown | read-only | current | The number of packets which is lost with unknown reason. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.29 | ColumnhwNqaJitterStatsOperOfICPIF | read-only | current | The ICPIF (Calculated Planning Impairment Factor) value for the latest jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.4.1.30 | ColumnhwNqaJitterStatsOperOfMOS | read-only | current | The MOS (Mean Opinion Score) value for the latest jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.5 | ScalarhwNqaAgentEnable | read-write | current | Enable NQA agent function. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.6 | TablehwNqaTcpServerTable | not-accessible | current | A table which contains the status of NQA tcp server configuration information. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.6.1 | RowhwNqaTcpServerEntry | not-accessible | current | A table which contains the status of NQA tcp server configuration information. This entry includes not only the tcp server ip address but also the tcp server p… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.6.1.1 | ColumnhwNqaTcpServerIpAddress | not-accessible | current | Tcp server's ip address. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.6.1.2 | ColumnhwNqaTcpServerPort | not-accessible | current | Tcp server's port number. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.6.1.3 | ColumnhwNqaTcpServerRowStatus | read-create | current | hwNqaTcpServerIpAddress and hwNqaTcpServerPort must be set during a creation operation. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.7 | TablehwNqaUdpServerTable | not-accessible | current | Status of NQA udp server configuration information. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.7.1 | RowhwNqaUdpServerEntry | not-accessible | current | This entry includes not only the udp server ip address but also the udp server udp port. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.7.1.1 | ColumnhwNqaUdpServerIpAddress | not-accessible | current | Udp server's ip address. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.7.1.2 | ColumnhwNqaUdpServerPort | not-accessible | current | Udp server's port number. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.7.1.3 | ColumnhwNqaUdpServerRowStatus | read-create | current | hwNqaUdpServerIpAddress and hwNqaUdpServerPort must be set during a creation operation. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.8 | ScalarhwNqaServerEnable | read-write | current | Enable NQA server function. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.9 | ScalarhwNqaStatsMaxGroupNumber | read-only | current | The maximum number saved per group. The maximum value of hwNqaCtlStatisticsGroupNumber can not exceed the value of this object. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.10 | TablehwNqaStatisticsCtlTable | not-accessible | current | Defines the NQA statistics control table for providing, via SNMP, the capability of performing NQA operations at a remote host. The results of these operations… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.10.1 | RowhwNqaStatisticsCtlEntry | not-accessible | current | Defines an entry in the hwNqaStatisticsCtlTable. The hwNqaStatisticsCtlTable has the same index as the pingCtlTable in order for a hwNqaStatisticsCtlTable to c… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.10.1.1 | ColumnhwNqaCtlStatisticsInterval | read-create | current | Statistic information will be calculated after the time that is the value of hwNqaCtlStatisticsInterval. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.10.1.2 | ColumnhwNqaCtlStatisticsGroupNumber | read-create | current | The value of this object indicates the number of group saved. The length of this object is from 1 to hwNqaStatsMaxGroupNumber. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.10.1.3 | ColumnhwNqaCtlStatisticsKeptTime | read-create | current | To indicate how long the statistic information will be saved after the test stops. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.10.1.4 | ColumnhwNqaCtlBeginTime | read-create | current | Time at which the type-specified test will start. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.10.1.5 | ColumnhwNqaCtlLifeTime | read-create | current | To indicate how long the type-specified test will last. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11 | TablehwNqaStatisticsResultsTable | not-accessible | current | Defines the NQA statistics results table for providing the capability of performing NQA operations at a remote host. The statistics results of these operations… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1 | RowhwNqaStatisticsResultsEntry | not-accessible | current | Defines an entry in the hwNqaStatisticsResultsTable. The hwNqaStatisticsResultsTable has the same index as the pingCtlTable in order for a hwNqaStatisticsResul… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.1 | ColumnhwNqaStatResIndex | not-accessible | current | An entry in this table is created when the statistics result of a NQA probe is determined. An implementation MUST start assigning hwNqaStatResIndex values at 1… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.2 | ColumnhwNqaStatResIpTargetAddressType | read-only | current | This object indicates the type of address stored in the corresponding hwNqaStatResIpTargetAddress object. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.3 | ColumnhwNqaStatResIpTargetAddress | read-only | current | This object represent the host address to be used at a remote host for performing a network analysis operation. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.4 | ColumnhwNqaStatResMinRtt | read-only | current | The minimum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.5 | ColumnhwNqaStatResMaxRtt | read-only | current | The maximum NQA probe round-trip-time (RTT) received. The value of 0 for this object implies that no RTT has been received. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.6 | ColumnhwNqaStatResAverageRtt | read-only | current | The average NQA probe round-trip-time (RTT). |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.7 | ColumnhwNqaStatResProbeResponses | read-only | current | The number of responses received. The value of this object MUST be reported as 0 when no probe responses have been received. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.8 | ColumnhwNqaStatResSentProbes | read-only | current | The value of this object reflects the number of probes sent. The value of this object MUST be reported as 0 when no probes have been sent. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.9 | ColumnhwNqaStatResRttSumOfSquares | read-only | current | This object contains the sum of the squares for all NQA responses received. The value of this object MUST be reported as 0 when no NQA responses have been rece… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.10 | ColumnhwNqaStatResStartTime | read-only | current | This object contains the start time of the statistic. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.11 | ColumnhwNqaStatResInterval | read-only | current | This object contains the interval between two times of statistic. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.12 | ColumnhwNqaStatResRttNumDisconnects | read-only | current | The number of times that a NQA probe failed because the destination became disconnected. For connectionless protocol pingCtlTypes, this number should be zero. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.13 | ColumnhwNqaStatResRttTimeouts | read-only | current | The number of times that a probe failed because the probe timed out. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.14 | ColumnhwNqaStatResRttBusies | read-only | current | The number of times that a NQA probe failed because errors related to sockets. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.15 | ColumnhwNqaStatResRttNoConnections | read-only | current | The number of times that a NQA probe failed because the probe destination is unavailable. For connectionless protocol pingCtlTypes, this number should be zero. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.16 | ColumnhwNqaStatResRttDrops | read-only | current | The number of times that a NQA operation failed to initiate for unavailibility of necessary internal resources. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.17 | ColumnhwNqaStatResRttSequenceErrors | read-only | current | The number of packets arrived out of sequence. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.18 | ColumnhwNqaStatResRttErrors | read-only | current | The number of other errors. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.19 | ColumnhwNqaStatResLostPacketRatio | read-only | current | The value of this object reflects the drop rate of NQA test packet. For example, if the value is 30, that means source device only had received 70 percent pack… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.20 | ColumnhwNqaStatResPacketLateArrival | read-only | current | The value of this object reflects the number of the packets that arrived after the timeout. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.21 | ColumnhwNqaStatResRttSum | read-only | current | This object contains the sum of the squares for all NQA responses received during the test lifetime. The value of this object MUST be reported as 0 when no NQA… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.22 | ColumnhwNqaStatResNumOfDelaySD | read-only | current | The number of one way times from source to destination that are successfully measured. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.23 | ColumnhwNqaStatResMinDelaySD | read-only | current | The minimum one way times from source to destination. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.24 | ColumnhwNqaStatResMaxDelaySD | read-only | current | The maximum one way times from source to destination. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.25 | ColumnhwNqaStatResSumDelaySD | read-only | current | The sum of one way times from source to destination. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.26 | ColumnhwNqaStatResSum2DelaySD | read-only | current | The sum of squares of one way times from source to destination. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.27 | ColumnhwNqaStatResNumOfDelayDS | read-only | current | The number of one way times from destination to source that are successfully measured. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.28 | ColumnhwNqaStatResMinDelayDS | read-only | current | The minimum one way times from destination to source. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.29 | ColumnhwNqaStatResMaxDelayDS | read-only | current | The maximum one way times from destination to source. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.30 | ColumnhwNqaStatResSumDelayDS | read-only | current | The sum of one way times from destination to source. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.11.1.31 | ColumnhwNqaStatResSum2DelayDS | read-only | current | The sum of squares of one way times from destination to source. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12 | TablehwNqaGroupStatsJitterTable | not-accessible | current | Test Group Statistic table for jitter activity in a statistic cycle. The statistic cycle is the value of hwNqaCtlStatisticsInterval. The first two index identi… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1 | RowhwNqaGroupStatsJitterEntry | not-accessible | current | An entry contains the group statistic information for jitter activity. This entry is created only if the pingCtlType is hwNqajitter. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.1 | ColumnhwNqaStatJitterIndex | not-accessible | current | An entry in this table is created when the statistic result of a NQA probe in a statistic cycle is determined. An implementation MUST start assigning hwNqaStat… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.2 | ColumnhwNqaStatJitterMinOfPosSD | read-only | current | The value of time that records the minimal positive jitter value from source to destination in jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.3 | ColumnhwNqaStatJitterMaxOfPosSD | read-only | current | The value of time that records the maximal positive jitter value from source to destination in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.4 | ColumnhwNqaStatJitterNumOfPosSD | read-only | current | The number that records positive jitter times from source to destination in the jitter test. The total number of all positive jitter values in packets sent fro… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.5 | ColumnhwNqaStatJitterSumOfPosSD | read-only | current | The value of time that records the sum of positive jitter values from source to destination in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.6 | ColumnhwNqaStatJitterSumOfSquarePosSD | read-only | current | The value of time that records the sum of square of positive jitter values from source to destination in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.7 | ColumnhwNqaStatJitterMinOfNegSD | read-only | current | The value of time that records the minimal absolute values of negative jitter value from source to destination in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.8 | ColumnhwNqaStatJitterMaxOfNegSD | read-only | current | The value of time that records the maximal absolute values of negative jitter value from source to destination in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.9 | ColumnhwNqaStatJitterNumOfNegSD | read-only | current | The number that records negative jitter times from source to destination in the jitter test. The total number of all negative jitter values sent from source to… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.10 | ColumnhwNqaStatJitterSumOfNegSD | read-only | current | The value of time that records the sum of negative jitter values from source to destination in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.11 | ColumnhwNqaStatJitterSumOfSquareNegSD | read-only | current | The value of time that records the sum of square of negative jitter values from source to destination in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.12 | ColumnhwNqaStatJitterMinOfPosDS | read-only | current | The value of time that records the minimal positive jitter value from destination to source in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.13 | ColumnhwNqaStatJitterMaxOfPosDS | read-only | current | The value of time that records the maximal positive jitter value from destination to source in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.14 | ColumnhwNqaStatJitterNumOfPosDS | read-only | current | The number that records positive jitter times from destination to source in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.15 | ColumnhwNqaStatJitterSumOfPosDS | read-only | current | The value of time that records the sum of positive jitter values from destination to source in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.16 | ColumnhwNqaStatJitterSumOfSquarePosDS | read-only | current | The value of time that records the sum of square of positive jitter values destination to source in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.17 | ColumnhwNqaStatJitterMinOfNegDS | read-only | current | The value of time that records the minimal absolute values of negative jitter value from destination to source in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.18 | ColumnhwNqaStatJitterMaxOfNegDS | read-only | current | The value of time that records the maximal absolute values of negative jitter value from destination to source in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.19 | ColumnhwNqaStatJitterNumOfNegDS | read-only | current | The number that records negative jitter times from destination to source in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.20 | ColumnhwNqaStatJitterSumOfNegDS | read-only | current | The value of time that records the sum of negative jitter values from destination to source in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.21 | ColumnhwNqaStatJitterSumOfSquareNegDS | read-only | current | The value of time that records the sum of square of negative jitter values from destination to source in the jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.22 | ColumnhwNqaStatJitterPacketLossSD | read-only | current | The lost packets number sent from source to destination. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.23 | ColumnhwNqaStatJitterPacketLossDS | read-only | current | The lost packets number sent from destination to source. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.24 | ColumnhwNqaStatJitterAvePosSD | read-only | current | The value of time that records the average positive jitter value from source to destination. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.25 | ColumnhwNqaStatJitterAveNegSD | read-only | current | The value of time that records the average negative jitter value from source to destination. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.26 | ColumnhwNqaStatJitterAvePosDS | read-only | current | The value of time that records the average positive jitter value from destination to source. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.27 | ColumnhwNqaStatJitterAveNegDS | read-only | current | The value of time that records the average negative jitter value from destination to source. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.28 | ColumnhwNqaStatJitterPktLossUnknown | read-only | current | The number of packets which is lost with unknown reason. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.29 | ColumnhwNqaStatJitterMaxOfICPIF | read-only | current | The maximum of all ICPIF values in a statistic cycle for jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.30 | ColumnhwNqaStatJitterMinOfICPIF | read-only | current | The minimum of all ICPIF values in a statistic cycle for jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.31 | ColumnhwNqaStatJitterMaxOfMOS | read-only | current | The maximum of all MOS values in a statistic cycle for jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.12.1.32 | ColumnhwNqaStatJitterMinOfMOS | read-only | current | The minimum of all MOS values in a statistic cycle for jitter test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.13 | TablehwNqaReactionTable | not-accessible | current | A table of NQA test monitoring notification and reaction configuration definitions. An entry is removed from this table when its corresponding pingCtlEntry is … |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.13.1 | RowhwNqaReactionEntry | not-accessible | current | Defines an entry in the hwNqaReactionTable.The first two index elements identify the pingCtlEntry that a hwNqaReactItemIndex belongs to. The third index elemen… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.1 | ColumnhwNqaReactOwnerIndex | accessible-for-notify | current | The first index of hwNqaReactionTable, it is the same as pingCtlOwnerIndex in pingCtlTable. hwNqaReactOwnerIndex and hwNqaReactTestName identify an existed tes… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.2 | ColumnhwNqaReactTestName | accessible-for-notify | current | The second index of hwNqaReactionTable, it is the same as pingCtlTestName in pingCtlTable. hwNqaReactOwnerIndex and hwNqaReactTestName identify an existed test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.3 | ColumnhwNqaReactItemIndex | accessible-for-notify | current | The third index of hwNqaReactionTable, it definitely identifies one of the reaction configurations for a test. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.4 | ColumnhwNqaReactCheckedElement | read-create | current | A list of reaction condition type. 'probetime' and 'probefailure' are valid when pingCtlType of the test is not hwNqajitter. 'jitterOwdSD': one way time from s… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.5 | ColumnhwNqaReactThresholdUpperLimit | read-create | current | This object defines an administrative upper-threshold value for hwNqaReactCheckedElement. The value of this object is zero if hwNqaReactCheckedElement is speci… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.6 | ColumnhwNqaReactThresholdLowerLimit | read-create | current | This object defines an administrative lower-threshold value for hwNqaReactCheckedElement. The value of hwNqaReactThresholdLowerLimit should be equal or less th… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.7 | ColumnhwNqaReactThresholdType | read-create | current | This object defines the reaction threshold types. invalid(0): Invalid value. average(1): If reaction threshold type is average and the average value of watched… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.8 | ColumnhwNqaReactThresholdConsecNum | read-create | current | This object defines a consecutive threshold limit. The value is zero when hwNqaReactThresholdType is not 'consecutive'. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.9 | ColumnhwNqaReactThresholdAccumNum | read-create | current | This object defines an accumulative threshold limit. The value is zero when the hwNqaReactThresholdType is not 'accumulative'. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.10 | ColumnhwNqaReactActionType | read-create | current | Specifies the type of reaction to generate if the specified violation type occurs for the monitored element: none - No reaction is generated trapOnly - A trap … |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.11 | ColumnhwNqaReactCurrentStatus | read-only | current | Specifies the current status of this reaction entry: invalid - Specifies the reaction entry status is uncertain. overThreshold - Specifies the reaction entry h… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.12 | ColumnhwNqaReactRowStatus | read-create | current | This object allows entries to be created and deleted in the hwNqaReactionTable. Creation of an entry in this table results in a new set of reaction configurati… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.13 | ColumnhwNqaReactCheckedNum | read-only | current | The number of checked element samples that are monitored. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.13.1.14 | ColumnhwNqaReactThresholdNum | read-only | current | The number of checked element samples that are over threshold. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.14 | TablehwNqaStatisticsReactionTable | not-accessible | current | A table of NQA test monitoring notification and reaction configuration definitions. An entry is removed from this table when its corresponding pingCtlEntry is … |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.14.1 | RowhwNqaStatisticsReactionEntry | not-accessible | current | Defines an entry in the hwNqaStatisticsReactionTable. The first two index elements identify the pingCtlEntry that a hwNqaReactItemIndex belongs to. The third i… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.14.1.1 | ColumnhwNqaStatReactOwnerIndex | not-accessible | current | The first index of hwNqaStatisticsReactionTable, it is the same as pingCtlOwnerIndex in pingCtlTable. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.14.1.2 | ColumnhwNqaStatReactTestName | not-accessible | current | The second index of hwNqaStatisticsReactionTable, it is the same as pingCtlTestName in pingCtlTable. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.14.1.3 | ColumnhwNqaStatReactIndex | not-accessible | current | The third index of hwNqaStatisticsReactionTable. An entry in this table is created when the statistics result of a NQA probe is determined. An implementation M… |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.14.1.4 | ColumnhwNqaStatReactItemIndex | not-accessible | current | The forth index of hwNqaStatisticsReactionTable, it definitely identifies one of the reaction configurations for a test |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.14.1.5 | ColumnhwNqaStatReactCheckedNum | read-only | current | The number of checked element samples that are monitored. |
| 1.3.6.1.4.1.43.45.1.5.25.28.1.14.1.6 | ColumnhwNqaStatReactThresholdNum | read-only | current | The number of checked element samples that are over threshold. |
| 1.3.6.1.4.1.43.45.1.5.25.28.2 | NodehwNqaImplementationTypeDomains | |||
| 1.3.6.1.4.1.43.45.1.5.25.28.2.1 | IdentityhwNqaUdpEcho | current | Indicates that an implementation is using the UDP based echo server. Notes: The hwNqaCtlTargetPort and hwNqaCtlSourcePort need to be set, while in the pingUdpE… | |
| 1.3.6.1.4.1.43.45.1.5.25.28.2.2 | IdentityhwNqaTcpconnect | current | Indicates that an implementation is attempting to connect to a TCP port in order to calculate a round trip time. Notes: The hwNqaCtlTargetPort and hwNqaCtlSour… | |
| 1.3.6.1.4.1.43.45.1.5.25.28.2.3 | IdentityhwNqajitter | current | Indicates that an implementation is using udp for packet transfers. 'jitter' will cause the NQA(Network Quality Analysis) application to perform delay variance… | |
| 1.3.6.1.4.1.43.45.1.5.25.28.2.4 | IdentityhwNqaHttp | current | Indicates that an implementation is using udp for name resolution, tcp connect and tcp data transfer mechanisms for HTTP data download from a particular HTTP S… | |
| 1.3.6.1.4.1.43.45.1.5.25.28.2.5 | IdentityhwNqadlsw | current | Indicates that an implementation is using tcp for sending keepalives. 'dlsw' will cause the NQA application to perform a keepalive operation to measure the res… | |
| 1.3.6.1.4.1.43.45.1.5.25.28.2.6 | IdentityhwNqadhcp | current | Indicates that an implementation is using udp for sending dhcp requests. 'dhcp' will cause the NQA application to perform an IP Address lease request/teardown … | |
| 1.3.6.1.4.1.43.45.1.5.25.28.2.7 | IdentityhwNqaftp | current | Indicates that an implementation is using tcp packet for ftp connect and data transfer. | |
| 1.3.6.1.4.1.43.45.1.5.25.28.3 | NodehwNqaNotifications | |||
| 1.3.6.1.4.1.43.45.1.5.25.28.3.1 | NotificationhwNqaProbeTimeOverThreshold | current | It is generated when the value of hwNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The ov… | |
| 1.3.6.1.4.1.43.45.1.5.25.28.3.2 | NotificationhwNqaJitterRTTOverThreshold | current | It is generated when the value of hwNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The ov… | |
| 1.3.6.1.4.1.43.45.1.5.25.28.3.3 | NotificationhwNqaProbeFailure | current | It is generated when the value of hwNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The ov… | |
| 1.3.6.1.4.1.43.45.1.5.25.28.3.4 | NotificationhwNqaJitterPacketLoss | current | It is generated when the value of hwNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The ov… | |
| 1.3.6.1.4.1.43.45.1.5.25.28.3.5 | NotificationhwNqaJitterSDOverThreshold | current | The SD means the jitter values from source to destination. It is generated when the value of hwNqaReactCurrentStatus changes. The change may occur when the wat… | |
| 1.3.6.1.4.1.43.45.1.5.25.28.3.6 | NotificationhwNqaJitterDSOverThreshold | current | The DS means the jitter values from destination to source. It is generated when the value of hwNqaReactCurrentStatus changes. The change may occur when the wat… | |
| 1.3.6.1.4.1.43.45.1.5.25.28.3.7 | NotificationhwNqaICPIFOverThreshold | current | It is generated when the value of hwNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The ov… | |
| 1.3.6.1.4.1.43.45.1.5.25.28.3.8 | NotificationhwNqaMOSOverThreshold | current | It is generated when the value of hwNqaReactCurrentStatus changes. The change may occur when the watched condition is over threshold or below threshold. The ov… |