MIB Viewer

A3COM-HUWAEI-LswPERFORMANCE-MIB

28 objects
No module-level DESCRIPTION found.
OIDNameAccessStatusDescription
1.3.6.1.4.1.43.45.1.1.3.4.0IdentityrmonExtendEventsV2currentDefinition point for pri RMON notifications.
1.3.6.1.4.1.43.45.1.1.3.4.0.1NotificationpririsingAlarmcurrentThe SNMP trap that is generated when an alarm entry crosses its rising threshold and generates an event that is configured for sending SNMP traps.
1.3.6.1.4.1.43.45.1.1.3.4.0.2NotificationprifallingAlarmcurrentThe SNMP trap that is generated when an alarm entry crosses its falling threshold and generates an event that is configured for sending SNMP traps.
1.3.6.1.4.1.43.45.1.1.3.4.4Identityperformance
1.3.6.1.4.1.43.45.1.1.3.4.4.1TableprialarmTablenot-accessiblecurrentA list of alarm entries.
1.3.6.1.4.1.43.45.1.1.3.4.4.1.1RowprialarmEntrynot-accessiblecurrentA list of parameters that set up a periodic checking for alarm conditions. For example, an instance of the alarmValue object might be named alarmValue.8
1.3.6.1.4.1.43.45.1.1.3.4.4.1.1.1ColumnprialarmIndexread-onlycurrentAn index that uniquely identifies an entry in the alarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device.
1.3.6.1.4.1.43.45.1.1.3.4.4.1.1.2ColumnprialarmIntervalread-writecurrentThe interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be taken in…
1.3.6.1.4.1.43.45.1.1.3.4.4.1.1.3ColumnprialarmVariableread-writecurrentThe object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Integer32, Counter3…
1.3.6.1.4.1.43.45.1.1.3.4.4.1.1.4ColumnprialarmSympolread-writecurrent
1.3.6.1.4.1.43.45.1.1.3.4.4.1.1.5ColumnprialarmSampleTyperead-writecurrentThe method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), …
1.3.6.1.4.1.43.45.1.1.3.4.4.1.1.6ColumnprialarmValueread-onlycurrentThe value of the statistic during the last sampling period. For example, if the sample type is deltaValue, this value will be the difference between the sample…
1.3.6.1.4.1.43.45.1.1.3.4.4.1.1.7ColumnprialarmStartupAlarmread-writecurrentThe alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThre…
1.3.6.1.4.1.43.45.1.1.3.4.4.1.1.8ColumnprialarmRisingThresholdread-writecurrentA threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval w…
1.3.6.1.4.1.43.45.1.1.3.4.4.1.1.9ColumnprialarmFallingThresholdread-writecurrentA threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was …
1.3.6.1.4.1.43.45.1.1.3.4.4.1.1.10ColumnprialarmRisingEventIndexread-writecurrentThe index of the eventEntry that is used when a rising threshold is crossed. The eventEntry identified by a particular value of this index is the same as ident…
1.3.6.1.4.1.43.45.1.1.3.4.4.1.1.11ColumnprialarmFallingEventIndexread-writecurrentThe index of the eventEntry that is used when a falling threshold is crossed. The eventEntry identified by a particular value of this index is the same as iden…
1.3.6.1.4.1.43.45.1.1.3.4.4.1.1.12ColumnprialarmStatCycleread-writecurrent
1.3.6.1.4.1.43.45.1.1.3.4.4.1.1.13ColumnprialarmStatTyperead-writecurrent
1.3.6.1.4.1.43.45.1.1.3.4.4.1.1.14ColumnprialarmOwnerread-writecurrentThe entity that configured this entry and is therefore using the resources assigned to it.
1.3.6.1.4.1.43.45.1.1.3.4.4.1.1.15ColumnprialarmStatusread-writecurrentThe status of this alarm entry.
1.3.6.1.4.1.43.45.1.1.3.4.5TablehwrmonEnableTablenot-accessiblecurrentA list of enable rmon entries.
1.3.6.1.4.1.43.45.1.1.3.4.5.1RowhwrmonEnableTableEntrynot-accessiblecurrentA list of parameters that set up a hwrmonEnableTable
1.3.6.1.4.1.43.45.1.1.3.4.5.1.1ColumnhwrmonEnableIfIndexread-onlycurrentSpecify an interface to enable rmon.
1.3.6.1.4.1.43.45.1.1.3.4.5.1.2ColumnhwrmonEnableStatusread-writecurrentSpecify an interface to enable rmon.
1.3.6.1.4.1.43.45.1.1.3.4.6TablehwTrapDestTablenot-accessiblecurrentDefines the trap destination Extend Table for providing, via SNMP, the capability of configure a trap dest.
1.3.6.1.4.1.43.45.1.1.3.4.6.1RowhwTrapDestEntrynot-accessiblecurrentDefines an entry in the hwTrapDestTable.
1.3.6.1.4.1.43.45.1.1.3.4.6.1.1ColumnhwTrapDestVersionread-createcurrentThe version for trap destination. This object may not be modified if the associated trapDestStatus object is equal to active(1).