A3COM-HUAWEI-SYS-MAN-MIB
123 objects
This MIB contains objects to manage the system. It focuses on the display of current configure file and image file,and the definition of reloading image. Add the support for XRN.
Imported Objects
| A3COM-HUAWEI-OID-MIB | h3cCommon |
| SNMP-TARGET-MIB | SnmpTagList SnmpTagValue |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.45.1.10.2.3 | Identityh3cSystemMan | This MIB contains objects to manage the system. It focuses on the display of current configure file and image file,and the definition of reloading image. Add t… | ||
| 1.3.6.1.4.1.43.45.1.10.2.3.1 | Nodeh3cSystemManMIBObjects | |||
| 1.3.6.1.4.1.43.45.1.10.2.3.1.1 | Nodeh3cSysClock | |||
| 1.3.6.1.4.1.43.45.1.10.2.3.1.1.1 | Scalarh3cSysLocalClock | read-write | current | This node gives the current local time of the system. The unit of it is DateAndTime. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.1.2 | Nodeh3cSysSummerTime | |||
| 1.3.6.1.4.1.43.45.1.10.2.3.1.1.2.1 | Scalarh3cSysSummerTimeEnable | read-only | current | This node indicates the status of summer time. If the value of this node is enable, means that summer time is enabled. If the value is disable, means that summ… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.1.2.2 | Scalarh3cSysSummerTimeZone | read-write | current | This node describes the name of time zone in summer. The string is only used to display in local time when summer time is running. That the value of h3cSysLoca… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.1.2.3 | Scalarh3cSysSummerTimeMethod | read-write | current | This node provides the execute method of summer time. oneOff(1): means that summer time only takes effect at specified time. repeating(2): means that summer ti… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.1.2.4 | Scalarh3cSysSummerTimeStart | read-write | current | This node provides the start time of summer time. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.1.2.5 | Scalarh3cSysSummerTimeEnd | read-write | current | This node provides the end time of summer time. The end time must be more than start time one day and less than start time one year. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.1.2.6 | Scalarh3cSysSummerTimeOffset | read-write | current | This node provides the offset time of summer time. The offset time(in seconds) means that how much time need to be appended to the local time. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.1.3 | Scalarh3cSysLocalClockString | read-write | current | This node gives the current local time of the system. For example, Tuesday May 26, 2002 at 1:30:15 would be displayed as: 2002-5-26T13:30:15.0Z |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.2 | Nodeh3cSysCurrent | |||
| 1.3.6.1.4.1.43.45.1.10.2.3.1.2.1 | Tableh3cSysCurTable | not-accessible | current | The current status of system. A configuration file, an image file and bootrom information are used to describe the current status. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.2.1.1 | Rowh3cSysCurEntry | not-accessible | current | An entry of h3cSysCurTable. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.2.1.1.1 | Columnh3cSysCurEntPhysicalIndex | not-accessible | current | The value of this object is the entity index which depends on the implementation of ENTITY-MIB. If ENTITY-MIB is not supported, the value for this object is th… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.2.1.1.2 | Columnh3cSysCurCFGFileIndex | read-only | current | The startup configuration file currently used by the specified entity. If the value of it is zero, no configuration file is used. It will be the value of corre… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.2.1.1.3 | Columnh3cSysCurImageIndex | read-only | current | The image file currently used by the specified entity. It will be the value of corresponding h3cSysImageIndex in h3cSysImageTable. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.2.1.1.4 | Columnh3cSysCurBtmFileName | read-only | current | The bootrom file currently used by the specified entity. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.2.1.1.5 | Columnh3cSysCurUpdateBtmFileName | read-only | current | The default value of this object is the same as the value of h3cSysCurBtmFileName. The value will be changed after updating the bootrom successfully. This boot… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.3 | Nodeh3cSysReload | |||
| 1.3.6.1.4.1.43.45.1.10.2.3.1.3.1 | Scalarh3cSysReloadSchedule | read-write | current | The object points one row in h3cSysReloadScheduleTable. Its value is equal to the value of h3cSysReloadScheduleIndex. When a reload action is finished, the val… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.3.2 | Scalarh3cSysReloadAction | read-write | current | Writing reloadOnSchedule(2) to this object performs the reload operation on schedule. If h3cSysReloadScheduleTime is not set, the value of h3cSysReloadAction c… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.3.3 | Tableh3cSysReloadScheduleTable | not-accessible | current | A reload parameters set table. The table is exclusively used for reloading. When reloading action finished, the value of the table may be empty or still exist.… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.3.3.1 | Rowh3cSysReloadScheduleEntry | not-accessible | current | Entry of h3cSysReloadScheduleTable. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.3.3.1.1 | Columnh3cSysReloadScheduleIndex | not-accessible | current | The index of h3cSysReloadScheduleTable. There are two parts for this index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++++++++ + physical in… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.3.3.1.2 | Columnh3cSysReloadEntity | read-create | current | The value of h3cSysReloadEntity indicates an entry in entPhysicalTable, which is the physical entity to be reloaded. If ENTITY-MIB is not supported,the value f… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.3.3.1.3 | Columnh3cSysReloadCfgFile | read-create | current | The value indicates an entry in h3cSysCFGFileTable. It defines a configuration file for reload action. It is the value of corresponding h3cSysCFGFileIndex in h… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.3.3.1.4 | Columnh3cSysReloadImage | read-create | current | The value indicates an entry in h3cSysImageTable. It defines an image file for reload action. It is the value of corresponding h3cSysImageIndex in h3cSysImageT… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.3.3.1.5 | Columnh3cSysReloadReason | read-create | current | The reason of system's reloading. It is a zero length octet string when not set. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.3.3.1.6 | Columnh3cSysReloadScheduleTime | read-create | current | Specify the local time at which the reload action will occur. we will only take octet strings with length 8 for this object which indicates the local time of t… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.3.3.1.7 | Columnh3cSysReloadRowStatus | read-create | current | If one of the value of h3cSysReloadEntity,h3cSysReloadImage is invalid, the value of h3cSysReloadRowStatus can not be set to the value of ACTIVE. A valid entry… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.3.3.1.8 | Columnh3cSysReloadScheduleTagList | read-create | current | It specifies a tag list for the entry. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.3.4 | Scalarh3cSysReloadTag | read-write | current | This object contains a single tag value which is used to select entries in the h3cSysReloadScheduleTable. In the h3cSysReloadScheduleTable,any entry that conta… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.4 | Nodeh3cSysImage | |||
| 1.3.6.1.4.1.43.45.1.10.2.3.1.4.1 | Scalarh3cSysImageNum | read-only | current | The number of system images. It indicates the total entries of h3cSysImageTable. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.4.2 | Tableh3cSysImageTable | not-accessible | current | The system image management table. When 'copy srcfile destfile' is executed via the CLI, if destfile is not existed, then h3cSysImageType of the new file will … |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.4.2.1 | Rowh3cSysImageEntry | not-accessible | current | An entity image entry. Each entry consists of information of an entity image. The h3cSysImageIndex exclusively defines an image file. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.4.2.1.1 | Columnh3cSysImageIndex | not-accessible | current | There are two parts for the index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + image index + +++++++++++++++++++++++++++… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.4.2.1.2 | Columnh3cSysImageName | read-only | current | The file name of the image. It MUST NOT contain the path of the file. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.4.2.1.3 | Columnh3cSysImageSize | read-only | current | Size of the file in bytes. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.4.2.1.4 | Columnh3cSysImageLocation | read-only | current | The directory path of the image. Its form should be the same as what defined in file system. Currently it is defined as follows: For mainboard: flash:/ For sla… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.4.2.1.5 | Columnh3cSysImageType | read-write | current | It indicates the reloading sequence attribute of the image. For devices which support dual image: If the value is 'main(1)',the image will be the first image i… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.5 | Nodeh3cSysCFGFile | |||
| 1.3.6.1.4.1.43.45.1.10.2.3.1.5.1 | Scalarh3cSysCFGFileNum | read-only | current | The number of the configuration files in the system. It indicates the total entries of h3cSysCFGFileTable. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.5.2 | Tableh3cSysCFGFileTable | not-accessible | current | A table of configuration files in this system. At present, the system doesn't support dual configure file, it should act as 'dual image' if dual configure file… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.5.2.1 | Rowh3cSysCFGFileEntry | not-accessible | current | A configuration file entry. Each entry consists of information of a configuration file. h3cSysCFGFileIndex exclusively decides a configuration file. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.5.2.1.1 | Columnh3cSysCFGFileIndex | not-accessible | current | There are two parts for the index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + cfgFile index + +++++++++++++++++++++++++… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.5.2.1.2 | Columnh3cSysCFGFileName | read-only | current | Configuration file name. The name should not include the colon (:) character as it is a special separator character used to delineate the device name, partitio… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.5.2.1.3 | Columnh3cSysCFGFileSize | read-only | current | Size of the file in bytes. Note that it does not include the size of the filesystem file header. File size will always be non-zero. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.5.2.1.4 | Columnh3cSysCFGFileLocation | read-only | current | The directory path of the image. Its form should be the same as what defined in filesystem. Currently it is defined as follows: For mainboard: flash:/ For slav… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.6 | Nodeh3cSysBtmFile | |||
| 1.3.6.1.4.1.43.45.1.10.2.3.1.6.1 | Nodeh3cSysBtmFileLoad | |||
| 1.3.6.1.4.1.43.45.1.10.2.3.1.6.1.1 | Scalarh3cSysBtmLoadMaxNumber | read-only | current | This object shows the maximum number of h3cSysBtmLoadEntry in each device/unit. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.6.2 | Tableh3cSysBtmLoadTable | not-accessible | current | This table is used to update the bootrom and show the results of the update operation. The bootrom files are listed at the h3cFlhFileTable. These files are use… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.6.2.1 | Rowh3cSysBtmLoadEntry | not-accessible | current | Entries in the h3cSysBtmLoadTable are created and deleted using the h3cSysBtmRowStatus object. When a new row is being created and the number of entries is h3c… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.6.2.1.1 | Columnh3cSysBtmLoadIndex | not-accessible | current | The index of h3cSysBtmLoadTable. There are two parts for this index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++++++++ + physical index + r… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.6.2.1.2 | Columnh3cSysBtmFileName | read-create | current | The bootrom file name is determined by the users. The file must exist in corresponding entity. The validity of the bootrom file will be identified by system. I… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.6.2.1.3 | Columnh3cSysBtmFileType | read-create | current | main(1) - The effective bootrom file. none(2) - The noneffective file. When bootrom is being updated, this object must be set to main(1). When bootrom is updat… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.6.2.1.4 | Columnh3cSysBtmRowStatus | read-create | current | Only support active(1), createAndGo(4), destroy(6). When a row is created successfully, the value of this object should be active(1), the value of h3cSysBtmFil… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.6.2.1.5 | Columnh3cSysBtmErrorStatus | read-only | current | This object shows the status of the specified operation after creating a row. invalidFile(1) - file is invalid. inProgress(2) - the operation is in progress. s… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.6.2.1.6 | Columnh3cSysBtmLoadTime | read-only | current | This object indicates operation time. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.7 | Nodeh3cSysPackage | |||
| 1.3.6.1.4.1.43.45.1.10.2.3.1.7.1 | Scalarh3cSysPackageNum | read-only | current | The number of software packages. It indicates the total entries of h3cSysPackageTable. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.7.2 | Tableh3cSysPackageTable | not-accessible | current | The system package management table. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1 | Rowh3cSysPackageEntry | not-accessible | current | An software package entry. Each entry consists of information of an software package. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.1 | Columnh3cSysPackageIndex | not-accessible | current | There are two parts for the index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + package index + +++++++++++++++++++++++++… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.2 | Columnh3cSysPackageName | read-only | current | The file name of the package. It MUST NOT contain the path of the file. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.3 | Columnh3cSysPackageSize | read-only | current | Size of the file in bytes. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.4 | Columnh3cSysPackageLocation | read-only | current | The directory path of the package. Its form should be the same as what defined in file system. Currently it is defined as follows: For mainboard: flash:/ For s… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.5 | Columnh3cSysPackageType | read-only | current | It indicates the type of the package file. boot : kernel, file system, memory management and other core components. system : interface management, configuratio… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.6 | Columnh3cSysPackageAttribute | read-write | current | It indicates the attribute of the package file. If the value is 'primary', the package will be the first package in the next reloading procedure. If the value … |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.7 | Columnh3cSysPackageStatus | read-only | current | It indicates the status of the package file. If this file is used in the current system, its status is 'active'. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.8 | Columnh3cSysPackageDescription | read-only | current | It is the description of the package. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.9 | Columnh3cSysPackageFeature | read-only | current | Indicate the feature of the package. Different package files could be the same feature. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.7.2.1.10 | Columnh3cSysPackageVersion | read-only | current | Indicate the version of the package. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.7.3 | Scalarh3cSysPackageOperateEntryLimit | read-write | current | The maximum number of the entries in h3cSysPackageOperateTable. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.7.4 | Tableh3cSysPackageOperateTable | not-accessible | current | A table of package file operate. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.7.4.1 | Rowh3cSysPackageOperateEntry | not-accessible | current | An operate request entry. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.7.4.1.1 | Columnh3cSysPackageOperateIndex | not-accessible | current | The unique index value of a row in this table. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.7.4.1.2 | Columnh3cSysPackageOperatePackIndex | read-create | current | Specify the package file in the h3cSysPackageTable. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.7.4.1.3 | Columnh3cSysPackageOperateStatus | read-create | current | activate or deactivate a package in the h3cSysPackageTable. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.7.4.1.4 | Columnh3cSysPackageOperateRowStatus | read-create | current | the status of this table entry. When the status is active all the object's value in the entry is not allowed to modified. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.7.4.1.5 | Columnh3cSysPackageOperateResult | read-only | current | the result of the operation. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.8 | Nodeh3cSysIpeFile | |||
| 1.3.6.1.4.1.43.45.1.10.2.3.1.8.1 | Scalarh3cSysIpeFileNum | read-only | current | The number of software IPE(Image Package Envelop) files. It indicates the total entries of h3cSysIpeFileTable. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.8.2 | Tableh3cSysIpeFileTable | not-accessible | current | The system IPE file manage table. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.8.2.1 | Rowh3cSysIpeFileEntry | not-accessible | current | An IPE package file entry. Each entry consists of information of an IPE package file. h3cSysIpeFileIndex exclusively decides an IPE file. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.8.2.1.1 | Columnh3cSysIpeFileIndex | not-accessible | current | There are two parts for the index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + IPE index + +++++++++++++++++++++++++++++… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.8.2.1.2 | Columnh3cSysIpeFileName | read-only | current | The file name of the IPE file. It MUST NOT contain the path of the file. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.8.2.1.3 | Columnh3cSysIpeFileSize | read-only | current | Size of the file in bytes. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.8.2.1.4 | Columnh3cSysIpeFileLocation | read-only | current | The directory path of the IPE file. Its form should be the same as what defined in file system. Currently it is defined as follows: For mainboard: flash:/ For … |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.8.3 | Tableh3cSysIpePackageTable | not-accessible | current | The IPE package file table. It shows the package files in the IPE file. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.8.3.1 | Rowh3cSysIpePackageEntry | not-accessible | current | An entry of the h3cIpePackageTable. Indexed by h3cSysIpeFileIndex and h3cSysIpePackageIndex. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.8.3.1.1 | Columnh3cSysIpePackageIndex | not-accessible | current | It is the IPE package index; IPE Package Index is a monotonically increasing integer for the sole purpose of indexing events. When it reaches the maximum value… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.8.3.1.2 | Columnh3cSysIpePackageName | read-only | current | The file name of the package file. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.8.3.1.3 | Columnh3cSysIpePackageSize | read-only | current | Size of the package file in bytes. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.8.3.1.4 | Columnh3cSysIpePackageType | read-only | current | It indicates the type of the package file. boot : kernel, file system, memory management and other core components. system : interface management, configuratio… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.8.3.1.5 | Columnh3cSysIpePackageDescription | read-only | current | It is the description of the package. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.8.3.1.6 | Columnh3cSysIpePackageFeature | read-only | current | Indicate the feature of the package. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.8.3.1.7 | Columnh3cSysIpePackageVersion | read-only | current | The version of the package. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.8.4 | Tableh3cSysIpeFileOperateTable | not-accessible | current | A table of IPE file operate. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.8.4.1 | Rowh3cSysIpeFileOperateEntry | not-accessible | current | An operate request entry. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.8.4.1.1 | Columnh3cSysIpeFileOperateIndex | not-accessible | current | The unique index value of a row in this table. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.8.4.1.2 | Columnh3cSysIpeFileOperateFileIndex | read-create | current | Specify the IPE file in the h3cSysIpeFileTable. This IPE file will be unpacked to package files. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.8.4.1.3 | Columnh3cSysIpeFileOperateAttribute | read-create | current | It indicates the attribute of the IPE file when it is used in the reloading. If the value is 'primary', the packages in the IPE file will be the first packages… |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.8.4.1.4 | Columnh3cSysIpeFileOperateRowStatus | read-create | current | the status of this table entry. When the status is active all the object's value in the entry is not allowed to modified. |
| 1.3.6.1.4.1.43.45.1.10.2.3.1.8.4.1.5 | Columnh3cSysIpeFileOperateResult | read-only | current | the result of the operation. |
| 1.3.6.1.4.1.43.45.1.10.2.3.2 | Nodeh3cSystemManMIBNotifications | |||
| 1.3.6.1.4.1.43.45.1.10.2.3.2.1 | Notificationh3cSysClockChangedNotification | current | A clock changed notification is generated when the current local date and time for the system has been manually changed. The value of h3cSysLocalClock reflects… | |
| 1.3.6.1.4.1.43.45.1.10.2.3.2.2 | Notificationh3cSysReloadNotification | current | A h3cSysReloadNotification will be sent before the corresponding entity is rebooted. It will also be sent if the entity fails to reboot because the clock has c… | |
| 1.3.6.1.4.1.43.45.1.10.2.3.2.3 | Notificationh3cSysStartUpNotification | current | a h3cSysStartUpNotification trap will be sent when the system starts up with 'main' image file failed, a trap will be sent to indicate which type the current i… | |
| 1.3.6.1.4.1.43.45.1.10.2.3.3 | Nodeh3cSystemManMIBConformance | |||
| 1.3.6.1.4.1.43.45.1.10.2.3.3.1 | Nodeh3cSystemManMIBCompliances | |||
| 1.3.6.1.4.1.43.45.1.10.2.3.3.1.1 | Complianceh3cSystemManMIBCompliance | current | The compliance statement for entities which implement the system management MIB. | |
| 1.3.6.1.4.1.43.45.1.10.2.3.3.2 | Nodeh3cSystemManMIBGroups | |||
| 1.3.6.1.4.1.43.45.1.10.2.3.3.2.1 | Grouph3cSysClockGroup | current | A collection of objects providing mandatory system clock information. | |
| 1.3.6.1.4.1.43.45.1.10.2.3.3.2.2 | Grouph3cSysReloadGroup | current | A collection of objects providing mandatory system reload. | |
| 1.3.6.1.4.1.43.45.1.10.2.3.3.2.3 | Grouph3cSysImageGroup | current | A collection of objects providing mandatory system image information. | |
| 1.3.6.1.4.1.43.45.1.10.2.3.3.2.4 | Grouph3cSysCFGFileGroup | current | A collection of objects providing mandatory system configuration file information. | |
| 1.3.6.1.4.1.43.45.1.10.2.3.3.2.5 | Grouph3cSysCurGroup | current | A collection of system current status. | |
| 1.3.6.1.4.1.43.45.1.10.2.3.3.2.6 | Grouph3cSystemManNotificationGroup | current | A collection of notifications. | |
| 1.3.6.1.4.1.43.45.1.10.2.3.3.2.7 | Grouph3cSystemBtmLoadGroup | current | A collection of objects providing system update bootrom information. |