A3Com-IPSO-r1-MIB
27 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | enterprises |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43 | Nodea3Com | |||
| 1.3.6.1.4.1.43.2 | NodebrouterMIB | |||
| 1.3.6.1.4.1.43.2.12 | Nodea3ComIPSO | |||
| 1.3.6.1.4.1.43.2.12.1 | Scalara3IPsecureCtl | read-write | mandatory | This object determines whether this system checks for IP security options. If this object has the value security1108 (1), then the system checks for IP securit… |
| 1.3.6.1.4.1.43.2.12.2 | Scalara3IPsecureFileServer | read-write | mandatory | This determines whether security options are processed when talking to the host identified by the UI parameter FileServerAddr. If set to yes (1), the File Serv… |
| 1.3.6.1.4.1.43.2.12.3 | Tablea3IPsecureParamTable | not-accessible | mandatory | This table contains a set of parameters relating to the configuration of IP security options. |
| 1.3.6.1.4.1.43.2.12.3.1 | Rowa3IPsecureParamEntry | not-accessible | mandatory | Each entry in this table contains a set of IP security parameters specific to a particular port. |
| 1.3.6.1.4.1.43.2.12.3.1.1 | Columna3IPsecureParamPortIndex | read-only | mandatory | This identifies the IP port to which the security parameters in this entry apply. |
| 1.3.6.1.4.1.43.2.12.3.1.2 | Columna3IPsecureParamCtl | read-write | mandatory | This object controls a number of parameters associated with IP security. Each parameter is represented by a specific bit. If the bit is set, the parameter is t… |
| 1.3.6.1.4.1.43.2.12.3.1.3 | Columna3IPsecureLabelDefaultLevel | read-write | mandatory | This parameter applies to packets received over this port that have no classification level or authority flags. When such packets are received, the value of th… |
| 1.3.6.1.4.1.43.2.12.3.1.4 | Columna3IPsecureLabelDefaultAuth | read-write | mandatory | Like a3IPsecureLabelDefaultLevel, this parameter applies only to packets received over this port that have no classification level or authority flags. When suc… |
| 1.3.6.1.4.1.43.2.12.3.1.5 | Columna3IPsecureLabelSysLevel | read-write | mandatory | This parameter applies to packets originated by this system and sent over this port. When such packets are sent, the value of this parameter determines the IP … |
| 1.3.6.1.4.1.43.2.12.3.1.6 | Columna3IPsecureLabelSysAuth | read-write | mandatory | Like a3IPsecureLabelSysLevel, this parameter applies only to packets originated by this system and sent over this port. When such packets are sent, the value o… |
| 1.3.6.1.4.1.43.2.12.3.1.7 | Columna3IPsecureMinLevel | read-write | mandatory | This defines the minimum classification level which is acceptable by this port. This applies to any packet which is entering or leaving this port. If the class… |
| 1.3.6.1.4.1.43.2.12.3.1.8 | Columna3IPsecureMaxLevel | read-write | mandatory | This define the maximum classification level which is acceptable by this port. This applies to any packet which is entering or leaving this port. If the classi… |
| 1.3.6.1.4.1.43.2.12.4 | Tablea3IPsecureAuthInTable | not-accessible | mandatory | This table enumerates all the combinations of Protection Authority flags that may be present in packets received over any of this system's ports. |
| 1.3.6.1.4.1.43.2.12.4.1 | Rowa3IPsecureAuthInEntry | not-accessible | mandatory | Each entry in this table contains a specific combination of Protection Authority flags that are acceptable in packets received over a specific port. |
| 1.3.6.1.4.1.43.2.12.4.1.1 | Columna3IPsecureAuthInPort | read-only | mandatory | This identifies the port to which this entry applies. |
| 1.3.6.1.4.1.43.2.12.4.1.2 | Columna3IPsecureAuthInFlags | read-only | mandatory | This identifies one combination of Protection Authority flags that is allowed to be present in any packet received by this port. The combination of Protection … |
| 1.3.6.1.4.1.43.2.12.4.1.3 | Columna3IPsecureAuthInMatch | read-write | mandatory | The value of this object determines whether the Protection Authority flags in a received packet must match the flags identified by the corresponding instance o… |
| 1.3.6.1.4.1.43.2.12.4.1.4 | Columna3IPsecureAuthInStatus | read-write | mandatory | This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB. |
| 1.3.6.1.4.1.43.2.12.5 | Tablea3IPsecureAuthOutTable | not-accessible | mandatory | This table enumerates all the combinations of Protection Authority flags that are allowed to be present in packets transmitted over any of this system's ports.… |
| 1.3.6.1.4.1.43.2.12.5.1 | Rowa3IPsecureAuthOutEntry | not-accessible | mandatory | Each entry in this table contains a specific combination of Protection Authority flags that are acceptable in packets transmitted over a specific port. |
| 1.3.6.1.4.1.43.2.12.5.1.1 | Columna3IPsecureAuthOutPort | read-only | mandatory | This identifies the port to which this entry applies. |
| 1.3.6.1.4.1.43.2.12.5.1.2 | Columna3IPsecureAuthOutFlags | read-only | mandatory | This identifies one combination of Protection Authority flags that is allowed to be present in any packet transmitted by this port. The combination of Protecti… |
| 1.3.6.1.4.1.43.2.12.5.1.3 | Columna3IPsecureAuthOutMatch | read-write | mandatory | The value of this object determines whether the Protection Authority flags in a received packet must match the flags identified by the corresponding instance o… |
| 1.3.6.1.4.1.43.2.12.5.1.4 | Columna3IPsecureAuthOutStatus | read-write | mandatory | This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB. |