A3COM-HUAWEI-EPON-UNI-MIB
145 objects
The objects in this MIB module are used to manage and display current configuration of UNI (user network interface) which is based on the ONU(Optical Network Unit).
Imported Objects
| A3COM-HUAWEI-OID-MIB | h3cEpon |
| IF-MIB | ifDescr ifIndex |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.45.1.10.2.42.5 | Identityh3cEponUni | The objects in this MIB module are used to manage and display current configuration of UNI (user network interface) which is based on the ONU(Optical Network U… | ||
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1 | Nodeh3cEponUniSysMan | |||
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1 | Tableh3cEponUniSysManTable | not-accessible | current | This table defines several UNI system parameters. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1 | Rowh3cEponUniSysManEntry | not-accessible | current | The entry of h3cEponUniSysManTable. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.1 | Columnh3cEponUniIndex | accessible-for-notify | current | The index value which uniquely identifies the FE(fast Ethernet) interface of the ONU. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.2 | Columnh3cEponUniDescr | read-only | current | A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the i… |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.3 | Columnh3cEponUniAdminStatus | read-write | current | The desired state of the user network interface. When a managed system initializes, all user network interfaces start with down(2) state. The testing(3)state i… |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.4 | Columnh3cEponUniMdi | read-write | current | Type of the line connected to UNI interface: mdi-ii(straight-through cable), mdi-x (crossover cable), mdi-auto (auto-sensing). |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.5 | Columnh3cEponUniPriority | read-write | current | The priority of user network interface. If the value is larger, the priority will be higher. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.6 | Columnh3cEponUniVlanType | read-write | current | UNI vlan types. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.7 | Columnh3cEponUniAccessVlan | read-write | current | The vlan ID assigned to untagged frames or Priority-Tagged frames received on user network interface. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.8 | Columnh3cEponUniTrunkPvid | read-write | current | PVID(port vlan ID), the vlan ID assigned to untagged frames or Priority-Tagged frames received on user network interface. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.9 | Columnh3cEponUniVLANTrunkAllowListLow | read-write | current | Each octet within this value specifies a set of eight vlans, with the first octet specifying vlans 1 through 8, the second octet specifying vlans 9 through 16,… |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.10 | Columnh3cEponUniVLANTrunkAllowListHigh | read-write | current | Each octet within this value specifies a set of eight vlans, with the first octet specifying vlans 2049 through 2056, the second octet specifying vlans 2057 th… |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.11 | Columnh3cEponUniInboundLineRate | read-write | current | The value of the inbound line-rate. measured with kbps. The upper limit of the line-rate is the value of h3cEponUniLineRateMax in the entry. It must be multipl… |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.12 | Columnh3cEponUniOutboundLineRate | read-write | current | The value of the outbound line-rate. measured with kbps. The upper limit of the line-rate is the value of h3cEponUniLineRateMax in the entry. It must be multip… |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.13 | Columnh3cEponUniFlowControl | read-write | current | Flow control status. true(1) - Flow control status enable. false(2) - Flow control status disable. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.14 | Columnh3cEponUniSpeed | read-write | current | User network interface speed. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.15 | Columnh3cEponUniDuplex | read-write | current | User network interface mode. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.16 | Columnh3cEponUniVlanVPNStatus | read-write | current | vlan VPN status. true(1) - vlan VPN status enable. false(2) - vlan VPN disable. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.17 | Columnh3cEponUniCountReset | read-write | current | Reset the counter which is about packets of the interface, then the counter will change to zero. There is no sense in reading this object. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.18 | Columnh3cEponUniPortIsolate | read-write | current | enable - enable UNI port isolate setting. disable - disable UNI port isolate setting. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.23 | Columnh3cEponUniVlanConfiguration | read-write | current | The vlan configuration of the related vlan mode. Transparent vlan mode: h3cEponUniVlanConfiguration is a zero length string. Tag vlan mode: the first four octe… |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.25 | Columnh3cEponUniAutoNegotiation | read-write | current | enable - enable auto negotiation. disable - disable auto negotiation. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.26 | Columnh3cEponUniRestartAutoNeg | read-write | current | Force to restart the auto negotiation process. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.29 | Columnh3cEponUniLinkStatus | read-only | current | The link status of UNI. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.30 | Columnh3cEponUniInterfaceType | read-only | current | UNI interface type. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.31 | Columnh3cEponUniVitualCableTest | read-write | current | True(1): Virtual cable test enable. False(2): Virtual cable test disable. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.32 | Columnh3cEponUniVCTCableStatus | read-only | current | Get the cable status. Normal(1),cable is normal. Abnormal(2),cable is abnormal. AbnormalOpen(3),cable is abnormal because of open circuit. AbnormalShort(4),cab… |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.33 | Columnh3cEponUniVCTCableLength | read-only | current | Get the cable length. When h3cEponUniVCTCableStatus is normal, the node stands for the length from the UNI port to the port opposite. When h3cEponUniVCTCableSt… |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.34 | Columnh3cEponUniVCTImpedanceMismatch | read-only | current | Get the cable impedance. Not-support(1),the UNI port does not support this function. True(2),impedance match. False(3),impedance mismatch. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.35 | Columnh3cEponUniVCTPairSkew | read-only | current | Get the symmetry of cable. If the function is not supported , the default value 0 will be returned. Unit:nanosecond(ns). |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.36 | Columnh3cEponUniVCTPairSwap | read-only | current | NotSupport(1),the UNI port does not support this function. True(2),pair swap. False(3),not pair swap. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.37 | Columnh3cEponUniVCTPolaritySwap | read-only | current | NotSupport(1),the UNI port does not support this function. True(2),polarity swap. False(3),not polarity swap. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.38 | Columnh3cEponUniVCTInsertionLoss | read-only | current | If the function is not supported , the default value 0 will be returned. Unit:decibel(db). |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.39 | Columnh3cEponUniVCTReturnLoss | read-only | current | If the function is not supported , the default value 0 will be returned. Unit:decibel(db). |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.1.1.40 | Columnh3cEponUniVCTNearendCrosstalk | read-only | current | If the function is not supported , the default value 0 will be returned. Unit:decibel(db). |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.2 | Tableh3cEponUniCountTable | not-accessible | current | A list of interface counter about frames entries. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1 | Rowh3cEponUniCountEntry | not-accessible | current | An entry containing management information applicable to a particular interface. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.1 | Columnh3cEponUniInStatsPkts | read-only | current | The total number of frames (including bad frames, broadcast frames, and multicast frames) received. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.2 | Columnh3cEponUniInStatsUnicastPkts | read-only | current | The total number of good frames received that are directed to the unicast address. Note that this does not include multicast and broadcast frames. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.3 | Columnh3cEponUniInStatsBroadcastPkts | read-only | current | The total number of good frames received that are directed to the broadcast address. Note that this does not include multicast frames. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.4 | Columnh3cEponUniInStatsMulticastPkts | read-only | current | The total number of good frames received that are directed to a multicast address. Note that this number does not include frames directed to the broadcast addr… |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.5 | Columnh3cEponUniInPausePkts | read-only | current | A count of MAC Control frames received on this interface by the pause(flow control) operation. This counter does not increment when the interface is in a half-… |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.6 | Columnh3cEponUniInTotalErrors | read-only | current | Total count of the error frames received on this interface. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.7 | Columnh3cEponUniInStatsCRCAlignErrors | read-only | current | The total number of frames received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had eith… |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.8 | Columnh3cEponUniInStatsUndersizePkts | read-only | current | The total number of frames received that are less than 64 octets long (excluding framing bits, but including FCS octets) and are otherwise well formed. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.9 | Columnh3cEponUniInStatsOversizePkts | read-only | current | The total number of frames received that are longer than 1518 octets (excluding framing bits, but including FCS octets) and are otherwise well formed. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.10 | Columnh3cEponUniInErrorbyOther | read-only | current | The total number of error frames received on this interface. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.11 | Columnh3cEponUniOutStatsPkts | read-only | current | The total number of frames (including bad frames, broadcast frames, and multicast frames) sent. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.12 | Columnh3cEponUniOutStatsUnicastPkts | read-only | current | The total number of good frames sent that are directed to the unicast address. Note that this does not include multicast and broadcast frames. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.13 | Columnh3cEponUniOutStatsBroadcastPkts | read-only | current | The total number of good frames sent that are directed to the broadcast address. Note that this does not include multicast frames. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.14 | Columnh3cEponUniOutStatsMulticastPkts | read-only | current | The total number of good frames sent that are directed to a multicast address. Note that this number does not include frames directed to the broadcast address. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.15 | Columnh3cEponUniOutStatsPausePkts | read-only | current | The total number of MAC control frames sent on this interface by the pause operation. This counter does not increment when the interface is in a half-duplex mo… |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.16 | Columnh3cEponUniOutTotalErrors | read-only | current | The total number of error frames sent on this interface. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.17 | Columnh3cEponUniOutStatsCollisions | read-only | current | The best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3… |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.18 | Columnh3cEponUniOutDelayExceededDiscards | read-only | current | The number of frames discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.19 | Columnh3cEponUniOutErrorbyOther | read-only | current | The total number of other error frames sent on this interface. Other error frames means the error frames out of collision frames and excessive delayed frames. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.2.1.20 | Columnh3cEponUniOutDroppedFrames | read-only | current | The total number of frames dropped because of buffer failure. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.3 | Tableh3cEponUniIgmpInfoTable | not-accessible | current | This table stores igmp information of UNI interface. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.3.1 | Rowh3cEponUniIgmpInfoEntry | not-accessible | current | The entry of h3cEponUniIgmpInfoTable. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.3.1.1 | Columnh3cEponUniMacIndex | not-accessible | current | The index uniquely identifies the igmp information in current UNI interface. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.3.1.2 | Columnh3cEponUniIgmpMacAddress | read-only | current | A 6-octet read-only value carrying the individual MAC address indicates which igmp group the UNI interface belonging to. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.3.1.3 | Columnh3cEponUniIgmpVlanId | read-only | current | An integer range from 1 to 4094 indicates the vlan which the igmp Mac address has joined in. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.4 | Nodeh3cEponUniParaMan | |||
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.4.1 | Scalarh3cEponUniLineRateMax | read-only | current | The maximum value of the line-rate(kbps) that user network interface can be set. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.4.2 | Scalarh3cEponUniLineRateStep | read-only | current | The step of line-rate(kbps). |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.4.3 | Scalarh3cEponUniNumberOnOnu | read-only | current | The user network interface number on ONU. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.5 | Nodeh3cEponUniScalarGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.6 | Tableh3cEponUniPortPolicyTable | not-accessible | current | UNI port policy configuration. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.6.1 | Rowh3cEponUniPortPolicyEntry | not-accessible | current | The entry of h3cEponUniPortPolicyTable. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.6.1.1 | Columnh3cEponUniPortPolicyStatus | read-write | current | enable - enable UNI upstream port policing. disable - disable UNI upstream port policing. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.6.1.2 | Columnh3cEponUniPortPolicyCir | read-write | current | The committed information rate, ranging from 1 to 102400, measured in kbps. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.6.1.3 | Columnh3cEponUniPortPolicyBucketDepth | read-write | current | The depth of the token bucket to tolerant the certain burst(CBS), ranging from 0 to 65535, measured in bytes. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.6.1.4 | Columnh3cEponUniPortPolicyExtraBurst | read-write | current | The extra token to permit the forwarding engine to finish the packet being sent when the bucket depth is exhausted, ranging from 0 to 65535, measured in bytes. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.6.1.5 | Columnh3cEponUniPortPolicyInboundCir | read-write | current | The inbound committed information rate, measured in kbps. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.6.1.6 | Columnh3cEponUniPortPolicyInboundBucketDepth | read-write | current | The inbound depth of the token bucket to tolerant the certain burst(CBS), ranging from 0 to 65535, measured in bytes. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.6.1.7 | Columnh3cEponUniPortPolicyInboundExtraBurst | read-write | current | The inbound extra token to permit the forwarding engine to finish the packet being sent when the bucket depth is exhausted, ranging from 0 to 65535, measured i… |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.6.1.8 | Columnh3cEponUniPortPolicyOutboundCir | read-write | current | The outbound committed information rate, stepped by 64, measured in kbps. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.6.1.9 | Columnh3cEponUniPortPolicyOutboundPir | read-write | current | The outbound peak information rate, stepped by 64, measured in kbps. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.7 | Tableh3cEponUniMulticastTable | not-accessible | current | UNI multicast configuration. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.7.1 | Rowh3cEponUniMulticastEntry | not-accessible | current | The entry of h3cEponUniPortPolicyTable. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.7.1.1 | Columnh3cEponUniMulticastGroupNumber | read-write | current | The allowed multicast group number that can be handled at the same time by UNI. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.7.1.2 | Columnh3cEponUniMulticastVlanList | read-write | current | The multicast vlan list. The first two octets of the string represent the first VLAN ID; the second two octets of the string represent the second VLAN ID, and … |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.7.1.3 | Columnh3cEponUniMulticastStripStatus | read-write | current | true - strip the vlan tag of multicast packet. false - does not strip the vlan tag of multicast packet. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.7.1.4 | Columnh3cEponUniMulticastFastleave | read-write | current | true(1) - fast leave of IGMP enable on ONU. false(2) - fast leave of IGMP disable on ONU. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.8 | Tableh3cEponUniTechAbilityTable | not-accessible | current | UNI multicast configuration. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.8.1 | Rowh3cEponUniTechAbilityEntry | not-accessible | current | The entry of h3cEponUniTechAbilityTable. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.8.1.1 | Columnh3cEponUniLocalTechAbility | read-only | current | The local port capabilities of the UNI. Each two octets stand for a capability of UNI: the first two octets represent one capability and the second two octets … |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.8.1.2 | Columnh3cEponUniAdvertisedTechAbility | read-only | current | The advertised port capabilities of the UNI. The capabilities list references the description of h3cEponUniLocalTechAbility. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.9 | Tableh3cEponUniMulticastControlTable | not-accessible | current | UNI multicast control parameters. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.9.1 | Rowh3cEponUniMulticastControlEntry | not-accessible | current | The entry of the table h3cEponUniMulticastControlTable. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.9.1.1 | Columnh3cEponUniMulticastVlanIndex | read-create | current | The multicast vlan ID. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.9.1.2 | Columnh3cEponUniMulticastAddressList | read-create | current | The multicast address, each four octets represents a multicast address, the address section ranging from the first four octets to the second four octets, and t… |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.9.1.3 | Columnh3cEponUniMulticastAccessRule | read-create | current | deny - deny the multicast packet. permit - permit the multicast packet. preview - permit the multicast packet with conditions. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.9.1.4 | Columnh3cEponUniMulticastChannelLimit | read-create | current | The limitation of multicast preview channel number. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.9.1.5 | Columnh3cEponUniMulticastPreTimeSlice | read-create | current | The time slice of multicast preview. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.9.1.6 | Columnh3cEponUniMulticastPreTimes | read-create | current | The number of multicast preview times. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.9.1.7 | Columnh3cEponUniMulticastPreInterval | read-create | current | The interval between two consecutive previews, measured in minute. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.9.1.8 | Columnh3cEponUniMulticastRowStatus | read-create | current | The status of this table entry. The active, createAndGo and the destory statuses are supported. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.9.1.9 | Columnh3cEponUniMulticastIndex | not-accessible | current | The index of the entry. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.9.1.10 | Columnh3cEponUniMulticastSourceIpList | read-create | current | This list contains many source ip addresses. Each ip address is contained in four octets. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.9.1.11 | Columnh3cEponUniMulticastResetInterval | read-create | current | The interval is measured in minute. From the last preview limitation is reached, a customer can preview again after this interval is expired. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.10 | Tableh3cEponUniQosIndexNextTable | not-accessible | current | The next index table. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.10.1 | Rowh3cEponUniQosIndexNextEntry | not-accessible | current | The entry of the table h3cEponUniQosIndexNextTable. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.10.1.1 | Columnh3cEponUniQosConfIndexNext | read-only | current | This object contains an appropriate value to be used for h3cEponUniQosConfIndex when creating rows in the h3cEponUniQosConfTable. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.11 | Tableh3cEponUniQosConfTable | not-accessible | current | UNI Qos configuration. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.11.1 | Rowh3cEponUniQosConfEntry | not-accessible | current | The entry of the table h3cEponUniQosConfTable. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.11.1.1 | Columnh3cEponUniQosConfIndex | not-accessible | current | The rule index. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.11.1.2 | Columnh3cEponUniQosConfRuleIndexNext | read-only | current | This object contains an appropriate value to be used for h3cEponUniQosRuleIndex when creating rows in the h3cEponUniQosRuleTable. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.11.1.3 | Columnh3cEponUniQosConfMappedQueue | read-create | current | The queue that the ethernet frames will be mapped. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.11.1.4 | Columnh3cEponUniQosConfMarkedPriority | read-create | current | Priority of the ethernet frames to be marked, which compliant with the 802.1D user priority standard. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.11.1.5 | Columnh3cEponUniQosConfRowStatus | read-create | current | The status of this table entry. The active, createAndGo and the destory statuses are supported. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.12 | Tableh3cEponUniQosRuleTable | not-accessible | current | Qos sub rule of the UNI. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.12.1 | Rowh3cEponUniQosRuleEntry | not-accessible | current | The entry of the table h3cEponUniQosRuleTable. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.12.1.1 | Columnh3cEponUniQosRuleIndex | not-accessible | current | The sub rule index. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.12.1.2 | Columnh3cEponUniQosRuleSelector | read-create | current | The ethernet frame selector. dstmac - based on destination MAC address. srcmac - based on source MAC address. ethernetpriority - based on ethernet priority. vl… |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.12.1.3 | Columnh3cEponUniQosRuleValue | read-create | current | The rule value based on the h3cEponUniQosRuleSelector. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.12.1.4 | Columnh3cEponUniQosRuleMacAddress | read-create | current | MAC Address. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.12.1.5 | Columnh3cEponUniQosRuleOperator | read-create | current | nervermatch - value never match. equal - field equal to the value. notequal - field not equal to the value. lessthanequal - field less than or equal to the val… |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.12.1.6 | Columnh3cEponUniQosRuleRowStatus | read-create | current | The status of this table entry. Only active, createAndGo and the destory are supported. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.13 | Tableh3cEponUniMirrorGroupTable | not-accessible | current | Qos sub rule of the UNI. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.13.1 | Rowh3cEponUniMirrorGroupEntry | not-accessible | current | The entry of the h3cEponUniMirrorGroupTable. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.13.1.1 | Columnh3cEponUniMirrorGroupID | not-accessible | current | Epon UNI mirror group ID. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.13.1.2 | Columnh3cEponUniMirrorInboundPortList | read-write | current | UNI inbound port list. Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specify… |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.13.1.3 | Columnh3cEponUniMirrorOutboundPortList | read-create | current | UNI outnbound port list, more infomation reference h3cEponUniMirrorInboundPortList |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.13.1.4 | Columnh3cEponUniMonitorPort | read-create | current | UNI monitor port. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.13.1.5 | Columnh3cEponUniMirrorRowStatus | read-create | current | RowStatus, Now support three status: createAndGo, active, destroy. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.14 | Tableh3cEponUniMirrorGroupIdNextTable | not-accessible | current | The next index table, which is used by h3cEponUniMirrorGroupTable. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.14.1 | Rowh3cEponUniMirrorGroupIdNextEntry | not-accessible | current | The entry of the table h3cEponUniMirrorGroupIdNextEntry. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.14.1.1 | Columnh3cEponUniMirrorGroupIDNext | read-only | current | This object contains an appropriate value to be used for h3cEponUniMirrorGroupID when creating rows in the h3cEponUniMirrorGroupTable. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.15 | Tableh3cEponUniMulticastCtrlInfoTable | not-accessible | current | UNI multicast information which is active . |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.15.1 | Rowh3cEponUniMulticastCtrlInfoEntry | not-accessible | current | The entry of the table h3cEponUniMulticastCtrlInfoTable. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.15.1.1 | Columnh3cEponUniMultActVlan | not-accessible | current | The multicast vlan ID which is active. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.15.1.2 | Columnh3cEponUniMultActAddress | not-accessible | current | The multicast address which is active. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.15.1.3 | Columnh3cEponUniMultActAccessRule | read-only | current | deny - deny the multicast packet. permit - permit the multicast packet. preview - permit the multicast packet with conditions. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.15.1.4 | Columnh3cEponUniMultActPreTimes | read-only | current | The number of multicast preview times which is active. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.15.1.5 | Columnh3cEponUniMultActPreRemain | read-only | current | The remanent time slice of multicast preview which is active. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.16 | Tableh3cEponUniMulticastIndexNextTable | not-accessible | current | The next index table, which is used by h3cEponUniMulticastControlTable. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.16.1 | Rowh3cEponUniMulticastIndexNextEntry | not-accessible | current | The entry of the table h3cEponUniMulticastIndexNextEntry. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.1.16.1.1 | Columnh3cEponUniMulticastConfIndexNext | read-only | current | This object contains an appropriate value to be used for h3cEponUniMulticastIndex when creating rows in the h3cEponUniMulticastControlTable. |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.2 | Nodeh3cEponUniTrap | |||
| 1.3.6.1.4.1.43.45.1.10.2.42.5.2.0 | Nodeh3cEponUniTrapPrefix | |||
| 1.3.6.1.4.1.43.45.1.10.2.42.5.2.0.1 | Notificationh3cEponUniLinkUpTrap | current | A h3cEponUniLinkUpTrap notification is sent when the UNI up event is detected and the transmitting switch is turned on. | |
| 1.3.6.1.4.1.43.45.1.10.2.42.5.2.0.2 | Notificationh3cEponUniLinkDownTrap | current | A h3cEponUniLinkDownTrap notification is sent when the UNI down event is detected and the transmitting switch is turned on. |