MIB Viewer

A3COM-HUAWEI-FCOE-MIB

29 objects
This MIB module is for configuring and monitoring Fibre Channel over Ethernet (FCoE) related entities. This MIB defines a Virtual FC (VFC) Interface as an object that represents either a VF_Port or a VE_Port on a FCoE Forwarder (FCF). VFC interfaces can be created either statically (by management request) or dynamically (at the time of FIP based FLOGI or ELP request). Other terminologies used in this MIB are defined by the H3c FCoE standard, as defined in the FC-BB-5 specification. See www.h3c.com for more information. This MIB also supports configuration of the following objects: - Mapping of FCoE VLAN-ID used to carry traffic for a Fabric - FC-MAP value used by the FCF operating in FPMA mode - FIP snooping related objects
Imported Objects
A3COM-HUAWEI-OID-MIBh3cCommon
FC-MGMT-MIBfcmInstanceIndex
IF-MIBInterfaceIndex InterfaceIndexOrZero
Q-BRIDGE-MIBVlanIndex
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-SMIMODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCMacAddress RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue
T11-TC-MIBT11FabricIndex
OIDNameAccessStatusDescription
1.3.6.1.4.1.43.45.1.10.2.120Identityh3cFCoEThis MIB module is for configuring and monitoring Fibre Channel over Ethernet (FCoE) related entities. This MIB defines a Virtual FC (VFC) Interface as an obje…
1.3.6.1.4.1.43.45.1.10.2.120.1Nodeh3cFCoEObjects
1.3.6.1.4.1.43.45.1.10.2.120.1.1Nodeh3cFCoEConfig
1.3.6.1.4.1.43.45.1.10.2.120.1.1.1Tableh3cFCoECfgTablenot-accessiblecurrentThis table facilitates configuration of FCoE parameters on a per Fibre Channel management instance.
1.3.6.1.4.1.43.45.1.10.2.120.1.1.1.1Rowh3cFCoECfgEntrynot-accessiblecurrentThere is one entry in this table for each Fibre Channel management instance.
1.3.6.1.4.1.43.45.1.10.2.120.1.1.1.1.1Columnh3cFCoECfgFcmapread-writecurrentThis object configures the FC-MAP value used by the FCF when operating in FPMA mode. The default value is 0EFC00h, as written in the standard.
1.3.6.1.4.1.43.45.1.10.2.120.1.1.1.1.2Columnh3cFCoECfgDynamicVfcCreationread-writecurrentThis object is set to 'true' to enable, or 'false' to disable, the dynamic creation of VFC interfaces on this FCF. When set to 'true', VFC interfaces are dynam…
1.3.6.1.4.1.43.45.1.10.2.120.1.1.1.1.3Columnh3cFCoECfgDefaultFCFPriorityread-writecurrentThe FIP priority value advertised by the FCF to ENodes by default. h3cFCoEStaticVfcFCFPriority configured for a VFC interface overrides this setting for the EN…
1.3.6.1.4.1.43.45.1.10.2.120.1.1.1.1.4Columnh3cFCoECfgDATovread-writecurrentThe Discovery_Advertisement_Timeout value configured for the FCF. This is used as the timeout value in seconds by the FCF to send periodic Discovery Advertisem…
1.3.6.1.4.1.43.45.1.10.2.120.1.1.1.1.5Columnh3cFCoECfgAddressingModeread-writecurrentAddressing mode(s) supported by the FCF. Implementations should fail SetRequests for unsupported modes.
1.3.6.1.4.1.43.45.1.10.2.120.1.1.2Tableh3cFCoEVLANTablenot-accessiblecurrentIn fabrics in which VLANs are deployed, this table facilitates configuration of VLAN and Virtual Fabric associations in an FCoE network. In such fabrics, FCoE …
1.3.6.1.4.1.43.45.1.10.2.120.1.1.2.1Rowh3cFCoEVLANEntrynot-accessiblecurrentThere is one entry in this table for each VLAN that is designated to transport FCoE traffic for a given Virtual Fabric.
1.3.6.1.4.1.43.45.1.10.2.120.1.1.2.1.1Columnh3cFCoEVLANIndexnot-accessiblecurrentThis object identifies the VLAN-ID that the FCoE FCF function is being enabled for.
1.3.6.1.4.1.43.45.1.10.2.120.1.1.2.1.2Columnh3cFCoEFabricIndexnot-accessiblecurrentThis object identifies the Fabric Index of the Virtual Fabric traffic which is to be transported over the VLAN identified by h3cFCoEVLANIndex.
1.3.6.1.4.1.43.45.1.10.2.120.1.1.2.1.3Columnh3cFCoEVLANOperStateread-onlycurrentOperational state of this VLAN-Virtual Fabric association entry. The 'up' state is achieved when both the Virtual Fabric and VLAN are valid.
1.3.6.1.4.1.43.45.1.10.2.120.1.1.2.1.4Columnh3cFCoEVLANRowStatusread-createcurrentThe status of this conceptual row. The RowStatus becomes active on successful creation of an entry.
1.3.6.1.4.1.43.45.1.10.2.120.1.1.3Tableh3cFCoEStaticVfcTablenot-accessiblecurrentThis table facilitates the creation and deletion of static VFC interfaces. While VFCs can be dynamically created based on FIP FLOGI/ELP requests, operators may…
1.3.6.1.4.1.43.45.1.10.2.120.1.1.3.1Rowh3cFCoEStaticVfcEntrynot-accessiblecurrentThere is one entry in this table for each statically created VFC Interface.
1.3.6.1.4.1.43.45.1.10.2.120.1.1.3.1.1Columnh3cFCoEStaticVfcIndexnot-accessiblecurrentThis index uniquely identifies a static VFC entry in this table.
1.3.6.1.4.1.43.45.1.10.2.120.1.1.3.1.2Columnh3cFCoEStaticVfcFCFPriorityread-createcurrentIf this VFC is for a VF_Port this object is used to configure FCF priority to be advertised to the ENode associated with the VFC.
1.3.6.1.4.1.43.45.1.10.2.120.1.1.3.1.3Columnh3cFCoEStaticVfcBindTyperead-createcurrentThe mechanism to identify the ENode associated with this VFC if it is of type VF_Port or to identify the remote-FCF associated with this VFC if it is of type V…
1.3.6.1.4.1.43.45.1.10.2.120.1.1.3.1.4Columnh3cFCoEStaticVfcBindIfIndexread-createcurrentThis object is applicable only when the local FCF is directly connected to an ENode or remote-FCF over a specific Ethernet interface, in which case this object…
1.3.6.1.4.1.43.45.1.10.2.120.1.1.3.1.5Columnh3cFCoEStaticVfcBindMACAddressread-createcurrentThis object is applicable when the ENode or remote-FCF to which the local FCF is connected is identified by a MAC address. A FIP frame from a ENode or remote-F…
1.3.6.1.4.1.43.45.1.10.2.120.1.1.3.1.6Columnh3cFCoEStaticVfcIfIndexread-onlycurrentThe ifIndex of this Virtual FC interface.
1.3.6.1.4.1.43.45.1.10.2.120.1.1.3.1.7Columnh3cFCoEStaticVfcCreationTimeread-onlycurrentThe timestamp of this entry's creation time.
1.3.6.1.4.1.43.45.1.10.2.120.1.1.3.1.8Columnh3cFCoEStaticVfcFailureCauseread-onlycurrentThe cause of failure for the last bind operation. This object will be zero length if and only if the bind is successful.
1.3.6.1.4.1.43.45.1.10.2.120.1.1.3.1.9Columnh3cFCoEStaticVfcRowStatusread-createcurrentThe status of this conceptual row. The RowStatus becomes active on successful creation of a VFC. The VFC does not need to be bound for the row to be active, bu…
1.3.6.1.4.1.43.45.1.10.2.120.1.2Nodeh3cFCoEFIPSnoopingObjects
Type Definitions
NameSyntaxStatusDescription
H3cFCoEVfcBindTypeINTEGER { interfaceIndex(1), macAddress(2) }currentDefines the different methods to identify (or bind to) - the ENode associated with a particular VF_Port VFC - the remote-FCF associated with a particular VE_Port VFC interfaceIndex(1) - This type is used only when an EN…
MIB Viewer