A3COM-HUAWEI-LswINF-MIB
110 objects
No module-level DESCRIPTION found.
Imported Objects
| A3COM-HUAWEI-OID-MIB | lswCommon |
| RFC1213-MIB | ifEntry ifIndex |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.45.1.2.23.1.1 | NodehwLswExtInterface | |||
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1 | TablehwifXXTable | not-accessible | current | Extended Huawei private interface information table. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1 | RowhwifXXEntry | not-accessible | current | Entries of extended Huawei private interface information table. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.1 | ColumnhwifUnBoundPort | read-only | current | Whether it is the unbound port. (true indicates that the port is the main port of the aggregation or the port does not participate in the aggregation.) |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.2 | ColumnhwifISPhyPort | read-only | current | Whether it is a physical interface. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.3 | ColumnhwifAggregatePort | read-only | current | Whether it is the aggregated port. (if the port participates in the aggregation, this value is true.) |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.4 | ColumnhwifMirrorPort | read-write | current | Whether it is a mirror port. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.5 | ColumnhwifVLANType | read-write | current | port vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.6 | ColumnhwifMcastControl | read-write | current | Broadcast storm suppression with the step length of 1, ranging from 1 to 100 percent. In some products the step is 5, ranging from 5 to 100. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.7 | ColumnhwifFlowControl | read-write | current | Flow control status. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.8 | ColumnhwifSrcMacControl | read-only | current | Whether to filter by source MAC address. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.9 | ColumnhwifClearStat | read-write | current | Clear all port statistics. Read operation not supported. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.10 | ColumnhwifXXBasePortIndex | read-only | current | Index number of the port and the first port index of the device is 1. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.11 | ColumnhwifXXDevPortIndex | read-only | current | Device index of the port. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.12 | ColumnhwifPpsMcastControl | read-write | current | The broadcast suppression with pps(packet per second) type. The max value is determined by the port type and product. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.13 | ColumnhwifPpsBcastDisValControl | read-write | current | Control the port's pps(packet per second) broadcast suppression. When the port is enabled, its pps broadcast suppression value is the global disperse value, an… |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.14 | ColumnhwifUniSuppressionStep | read-only | current | The step of unicast suppression in ratio mode. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.15 | ColumnhwifPpsUniSuppressionMax | read-only | current | The max pps(packet per second) value of unicast suppression in pps mode. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.16 | ColumnhwifMulSuppressionStep | read-only | current | The step of multicast suppression in ratio mode. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.17 | ColumnhwifPpsMulSuppressionMax | read-only | current | The max pps(packet per second) value of multicast suppression in pps mode. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.18 | ColumnhwifUniSuppression | read-write | current | The unicast suppression with the ranging from 1 to 100 percent in ratio mode. The step is determined by hwifUniSuppressionStep. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.19 | ColumnhwifPpsUniSuppression | read-write | current | The unicast suppression in pps(packet per second) mode. The max value is determined by hwifPpsUniSuppressionMax. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.20 | ColumnhwifMulSuppression | read-write | current | The multicast suppression with ranging from 1 to 100 percent in ratio mode. The step is determined by hwifMulSuppressionStep. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.21 | ColumnhwifPpsMulSuppression | read-write | current | The multicast suppression in pps(packet per second) mode. The max pps value is determined by hwifPpsMulSuppressionMax. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.22 | ColumnhwifComboActivePort | read-write | obsolete | Active port on combo interface. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.23 | ColumnhwifBMbpsMulSuppressionMax | read-only | current | The maximum value of the multicast suppression with bandwidth-based(Mbps) that a port can be configured. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.24 | ColumnhwifBMbpsMulSuppression | read-write | current | With bandwidth-based multicast suppression, the bandwidth is measured in Mbps. The upper limit of the multicast suppession with bandwidth-based(Mbps) is the va… |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.25 | ColumnhwifBKbpsMulSuppressionMax | read-only | current | The maximum value of the multicast suppression with bandwidth-based(Kbps) that a port can be configured. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.26 | ColumnhwifBKbpsMulSuppressionStep | read-only | current | The step of multicast suppression with bandwidth-based(Kbps). |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.27 | ColumnhwifBKbpsMulSuppression | read-write | current | With bandwidth-based multicast suppression, the bandwidth is measured in Kbps. The upper limit of the multicast suppession with bandwidth-based(Kbps) is the va… |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.28 | ColumnhwifUnknownPacketDropMul | read-write | current | Control the port's unknown-multicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-multicast packets in inbound dire… |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.29 | ColumnhwifUnknownPacketDropUni | read-write | current | Control the port's unknown-unicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-unicast packets in inbound directio… |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.30 | ColumnhwifBMbpsUniSuppressionMax | read-only | current | The maximum value of the unicast suppression with bandwidth-based (Mbps) that a port can be configured. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.31 | ColumnhwifBMbpsUniSuppression | read-write | current | With bandwidth-based Unicast suppression, the bandwidth is measured in Mbps. The upper limit of the unicast suppession with bandwidth-based(Mbps) is the value … |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.32 | ColumnhwifBKbpsUniSuppressionMax | read-only | current | The maximum value of the unicast suppression with bandwidth-based (Kbps) that a port can be configured. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.33 | ColumnhwifBKbpsUniSuppressionStep | read-only | current | The step of unicast suppression with bandwidth-based(Kbps). |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.34 | ColumnhwifBKbpsUniSuppression | read-write | current | With bandwidth-based unicast suppression, the bandwidth is measured in Kbps. The upper limit of the unicast suppession with bandwidth-based(Kbps) is the value … |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.35 | ColumnhwifOutPayloadOctets | read-only | current | The actual output octets of the interface. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.36 | ColumnhwifInPayloadOctets | read-only | current | The actual input octets of the interface. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.37 | ColumnhwifInErrorPktsRate | read-only | current | The rate of inbound error packets on the interface. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.38 | ColumnhwifInPkts | read-only | current | The number of packets received on the interface. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.39 | ColumnhwifInNormalPkts | read-only | current | The number of normal packets received on the interface. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.1.1.40 | ColumnhwifOutPkts | read-only | current | The number of packets sent on the interface. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.2 | TablehwifAggregateTable | not-accessible | current | Port aggregation information table. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.2.1 | RowhwifAggregateEntry | not-accessible | current | Port aggregation information table. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.2.1.1 | ColumnhwifAggregatePortIndex | read-only | current | Index number of the main aggregated port. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.2.1.2 | ColumnhwifAggregatePortName | read-write | current | Aggregation group name. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.2.1.3 | ColumnhwifAggregatePortListPorts | read-write | current | Portlist of a aggregating. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.2.1.4 | ColumnhwifAggregateModel | read-write | current | Load sharing mode for the port aggregation. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.2.1.5 | ColumnhwifAggregateOperStatus | read-create | current | Current operation status of the row. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.3 | TablehwifHybridPortTable | not-accessible | current | Hybrid-port configuration table. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.3.1 | RowhwifHybridPortEntry | not-accessible | current | Hybrid-port configuration table. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.3.1.1 | ColumnhwifHybridPortIndex | read-only | current | Index number of Hybrid-port. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.3.1.2 | ColumnhwifHybridTaggedVlanListLow | read-write | current | Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16,… |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.3.1.3 | ColumnhwifHybridTaggedVlanListHigh | read-write | current | Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 th… |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.3.1.4 | ColumnhwifHybridUnTaggedVlanListLow | read-write | current | Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16,… |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.3.1.5 | ColumnhwifHybridUnTaggedVlanListHigh | read-write | current | Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 th… |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.4 | TablehwifComboPortTable | not-accessible | current | Combo-port table. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.4.1 | RowhwifComboPortEntry | not-accessible | current | The entry of hwifComboPortTable. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.4.1.1 | ColumnhwifComboPortIndex | read-only | current | The combo-port interface index. Its value is the same as the value of ifIndex in ifTable, but only includes indexes of the combo-port interfaces. |
| 1.3.6.1.4.1.43.45.1.2.23.1.1.4.1.2 | ColumnhwifComboPortCurActive | read-write | current | Current active interface of combo interfaces. The value 'fiber' means the interface with fiber connector of the pair of combo-port interfaces is active. The va… |
| 1.3.6.1.4.1.43.45.1.2.23.1.5 | IdentityhwLswL2InfMib | |||
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1 | NodehwLswL2InfMibObject | |||
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.1 | ScalarhwSlotPortMax | read-only | current | Max ports of the slots. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.2 | ScalarhwSwitchPortMax | read-only | current | Max ports that this switch includes. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.3 | TablehwifVLANTrunkStatusTable | not-accessible | current | Gvrp attributes on the VlanTrunk port. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.3.1 | RowhwifVLANTrunkStatusEntry | not-accessible | current | Gvrp attributes on the VlanTrunk port. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.3.1.1 | ColumnhwifVLANTrunkIndex | read-only | current | Index number of the VLANTrunk interface. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.3.1.2 | ColumnhwifVLANTrunkGvrpRegistration | read-write | current | GVRP registration information normal: This is the default configuration. Allow create, register and unregister vlans dynamiclly at this port. fixed: Aallow cre… |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.3.1.4 | ColumnhwifVLANTrunkPassListLow | read-only | current | Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16,… |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.3.1.5 | ColumnhwifVLANTrunkPassListHigh | read-only | current | Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 th… |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.3.1.6 | ColumnhwifVLANTrunkAllowListLow | read-write | current | Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16,… |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.3.1.7 | ColumnhwifVLANTrunkAllowListHigh | read-write | current | Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 th… |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.4 | TablehwethernetTable | not-accessible | current | Ethernet port attribute table. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1 | RowhwethernetEntry | not-accessible | current | Entries of Ethernet port attribute table |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.3 | ColumnhwifEthernetDuplex | read-write | current | Ethernet interface mode. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.4 | ColumnhwifEthernetMTU | read-write | current | MTU on the Ethernet interface. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.5 | ColumnhwifEthernetSpeed | read-write | current | Ethernet interface speed. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.7 | ColumnhwifEthernetMdi | read-write | current | Type of the line connected to the port. MDI-II (straight-through cable): 1 MDI-X (crossover cable): 2 MDI-AUTO (auto-sensing): 3 |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.8 | ColumnhwMaxMacLearn | read-write | current | The maximum number of MAC addresses that the port can learn. The value -1 means that the number of Mac addresses that the port can learn is unlimited. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.9 | ColumnhwifMacAddressLearn | read-only | current | This object indicates if the interface is allowed to learn mac address. eanbled(1) means the interface can learn mac address, otherwise disabled(2) can be set. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.10 | ColumnhwifEthernetTest | read-write | current | Test this interface. The actual testing will be different according to products. Read operation not supported. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.11 | ColumnhwifMacAddrLearnMode | read-only | current | Status indicates mac address learn mode of the interface. IVL(1) means independent VLAN learning. SVL means shared VLAN learning. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.12 | ColumnhwifEthernetFlowInterval | read-write | current | Set flow interval of the ethernet. The NMS should set value to integer which is a multiple of 5. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.13 | ColumnhwifEthernetIsolate | read-write | current | Isolate group means that all ports in the same isolate group can not send and receive packets each other. Each octet within this value specifies a set of eight… |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.14 | ColumnhwifVlanVPNStatus | read-write | current | Vlan VPN enable status. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.15 | ColumnhwifVlanVPNUplinkStatus | read-write | current | Vlan VPN uplink status. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.16 | ColumnhwifVlanVPNTPID | read-write | current | Port based Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100. Please refer to hwVlanVPNTPIDMode to get more information. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.17 | ColumnhwifIsolateGroupID | read-write | current | Isolate group identifier. Value zero means this interface does not belong to any isolate group. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.18 | ColumnhwifisUplinkPort | read-only | current | Ethernet uplink status, default value is 2. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.19 | ColumnhwifEthernetAutoSpeedMask | read-only | current | This object specifies which kinds of speed mode can be negotiated. Each bit corresponds to a kind of speed mode. If the value of a bit is '1', it means the cor… |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.4.1.20 | ColumnhwifEthernetAutoSpeed | read-write | current | This object indicates which kinds of speed mode are negotiable on this port. Only when a bit of hwifEthernetAutoSpeedMask is '1', the corresponding bit of this… |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.5 | ScalarhwIsolateGroupMax | read-only | current | Max isolate group that this device support, the value is zero means that the device does not support isolate group. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.6 | ScalarhwGlobalBroadcastMaxPps | read-write | current | The global max packets per second. When it is set, the value of BroadcastMaxPps in all ports will be changed to that setting. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.7 | ScalarhwGlobalBroadcastMaxRatio | read-write | current | The global max-ratio of broadcast from 0 to 100 percent. When it is set, the value of BroadcastMaxRatio in all ports will be changed to that setting. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.8 | ScalarhwBpduTunnelStatus | read-write | current | Bpdu tunnel enable status. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.9 | ScalarhwVlanVPNTPIDMode | read-only | current | Vlan VPN TPID mode. The value 'port-based' means VLAN VPN TPID value would be set based on port via hwifVlanVPNTPID. In this situation, hwVlanVPNTPID is meanin… |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.10 | ScalarhwVlanVPNTPID | read-write | current | Global Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.11 | TablehwPortIsolateGroupTable | not-accessible | current | Isolate Group attribute table. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.11.1 | RowhwPortIsolateGroupEntry | not-accessible | current | The entry of hwPortIsolateGroupTable. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.11.1.1 | ColumnhwPortIsolateGroupIndex | not-accessible | current | Port isolate group identifier. The index of the hwPortIsolateGroupTable. The value ranges from 1 to the limit of isolate group quantity. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.11.1.2 | ColumnhwPortIsolateUplinkIfIndex | read-create | current | Index number of the uplink interface. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.11.1.3 | ColumnhwPortIsolateGroupRowStatus | read-create | current | Current operation status of the row. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.11.1.4 | ColumnhwPortIsolateGroupDescription | read-create | current | Port isolate group description, default value is zero-length string. |
| 1.3.6.1.4.1.43.45.1.2.23.1.5.1.12 | ScalarhwMaxMacLearnRange | read-only | current | The maximum number of MAC address that the port supports. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DropDirection | INTEGER { disable (1), enableInbound (2), enableOutbound (3), enableBoth (4) } | current | Representing the direction of dropping packets, if applicable. |
| InterfaceIndex | Integer32 | current | A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must re… |
| PortList | OCTET STRING | current | Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents… |
| SpeedModeFlag | BITS { s10M(0), s100M(1), s1000M(2), s10000M(3), s24000M(4), s40000M(5), s100000M(6) } | current | Type of Negotiable Speed mode. |
| VlanIndex | Unsigned32 (0..4294967295) | current | A value used to index per-VLAN tables: values of 0 and 4095 are not permitted; if the value is between 1 and 4094 inclusive, it represents an IEEE 802.1Q VLAN-ID with global scope within a given bridged domain (see Vlan… |