MIB Viewer

A3COM-HUAWEI-DSP-MIB

22 objects
This MIB is to provide the definition of the DSP(Digital Signal Processing) status.
Imported Objects
A3COM-HUAWEI-OID-MIBh3cCommon
ENTITY-MIBPhysicalIndex
SNMPv2-SMIInteger32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks
OIDNameAccessStatusDescription
1.3.6.1.4.1.43.45.1.10.2.89Identityh3cDSPThis MIB is to provide the definition of the DSP(Digital Signal Processing) status.
1.3.6.1.4.1.43.45.1.10.2.89.1Tableh3cVPMStatusTablenot-accessiblecurrentThe table contains status parameters of VPM(Voice Process Module) card.
1.3.6.1.4.1.43.45.1.10.2.89.1.1Rowh3cVPMStatusEntrynot-accessiblecurrentThe entry of VPM status table.
1.3.6.1.4.1.43.45.1.10.2.89.1.1.1Columnh3cVPMIndexaccessible-for-notifycurrentThe index for this entry. The sequence of VPM card in the chassis is from the top to bottom.
1.3.6.1.4.1.43.45.1.10.2.89.1.1.2Columnh3cVPMEnPhysicalIndexread-onlycurrentThe object corresponds to PhysicalIndex in the chassis.
1.3.6.1.4.1.43.45.1.10.2.89.1.1.3Columnh3cVPMStateread-onlycurrentThe object indicates the current state of VPM card being monitored. normal(1) - VPM card in normal condition. warning(2) - VPM card has some problem and need a…
1.3.6.1.4.1.43.45.1.10.2.89.1.1.4Columnh3cVPMResourceUtilizationread-onlycurrentThe object indicates the percentage of current DSP resource utilization of the VPM card. The utilization is a ratio of number of busy DSP resources (for handli…
1.3.6.1.4.1.43.45.1.10.2.89.1.1.5Columnh3cVPMHiWaterUtilizationread-onlycurrentThe object indicates the highest percentage of DSP resource utilization of the VPM card that have been occured.
1.3.6.1.4.1.43.45.1.10.2.89.1.1.6Columnh3cVPMMaxChannelread-onlycurrentThe maximum number of channels can be supported in each VPM card.
1.3.6.1.4.1.43.45.1.10.2.89.2Tableh3cDSPStatusTablenot-accessiblecurrentThe table contains status parameters of DSP(Digital Signal Processing) card.
1.3.6.1.4.1.43.45.1.10.2.89.2.1Rowh3cDSPStatusEntrynot-accessiblecurrentThe entry of DSP status table.
1.3.6.1.4.1.43.45.1.10.2.89.2.1.1Columnh3cDSPIndexaccessible-for-notifycurrentThe index for this entry. DSP is fixed on VPM card or chassis card. The sequence of DSP in the VPM card or chassis card is from right to left.
1.3.6.1.4.1.43.45.1.10.2.89.2.1.2Columnh3cDSPVPMIndexread-onlycurrentThe object corresponds to VPMIndex in the chassis. If value of this object is non-zero, it is the index of VPM card.(DSP is in this VPM card.) If value of this…
1.3.6.1.4.1.43.45.1.10.2.89.2.1.3Columnh3cDSPEnPhysicalIndexread-onlycurrentThe object corresponds to PhysicalIndex in the chassis.
1.3.6.1.4.1.43.45.1.10.2.89.2.1.4Columnh3cDSPResetTimeread-onlycurrentThe value of sysUpTime from the last DSP reset occurred.
1.3.6.1.4.1.43.45.1.10.2.89.2.1.5Columnh3cDSPMaxChannelread-onlycurrentThe maximum number of channels can be supported in each DSP. The value is chosen in an implementation-dependent manner by the DSP functionality.
1.3.6.1.4.1.43.45.1.10.2.89.2.1.6Columnh3cDSPStateread-onlycurrentThe object indicates the current state of DSP being monitored. normal(1) - DSP in normal condition. fatal(3) - DSP is not functional. offLine(4) - DSP is in of…
1.3.6.1.4.1.43.45.1.10.2.89.2.1.7Columnh3cDSPInUseChannelread-onlycurrentThe number of channels that are reserved for serving calls. The value is incremented when the DSP channel is reserved for call setup and is decremented after t…
1.3.6.1.4.1.43.45.1.10.2.89.3Nodeh3cDSPTrap
1.3.6.1.4.1.43.45.1.10.2.89.3.0Nodeh3cDSPTrapPrex
1.3.6.1.4.1.43.45.1.10.2.89.3.0.1Notificationh3cVPMStateChangecurrentThis trap is sent when VPM state changes.
1.3.6.1.4.1.43.45.1.10.2.89.3.0.2Notificationh3cDSPStateChangecurrentThis trap is sent when DSP state changes.
MIB Viewer