A3COM-HUAWEI-BFD-STD-MIB
49 objects
Bidirectional Forwarding Management Information Base.
Imported Objects
| A3COM-HUAWEI-OID-MIB | h3cCommon |
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.45.1.10.2.72 | Identityh3cBfdMIB | Bidirectional Forwarding Management Information Base. | ||
| 1.3.6.1.4.1.43.45.1.10.2.72.0 | Nodeh3cBfdNotifications | |||
| 1.3.6.1.4.1.43.45.1.10.2.72.0.1 | Notificationh3cBfdSessStateChange | current | A notification sent when an session changes state, entering state up or entering state down. The session will enter state up finishing three times handshakes ,… | |
| 1.3.6.1.4.1.43.45.1.10.2.72.0.2 | Notificationh3cBfdSessAuthFail | current | A notification sent when receiving a session with an authentication fail. The h3cBfdIfIndex is an index which represents a unique BFD interface on this device. | |
| 1.3.6.1.4.1.43.45.1.10.2.72.1 | Nodeh3cBfdObjects | |||
| 1.3.6.1.4.1.43.45.1.10.2.72.1.1 | Nodeh3cBfdGlobalObjects | |||
| 1.3.6.1.4.1.43.45.1.10.2.72.1.1.1 | Scalarh3cBfdVersionNumber | read-only | current | It indicates the BFD session's current version number. |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.1.2 | Scalarh3cBfdSysInitMode | read-write | current | A system may take either an active role or a passive role in session initialization. A system taking the active role must send BFD control packets for a partic… |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.1.3 | Scalarh3cBfdSessNotificationsEnable | read-write | current | This variable enables the emission of h3cBfdSessStateChange and h3cBfdSessAuthFail notifications if this variable is set to true(1); otherwise these notificati… |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.2 | Tableh3cBfdIfTable | not-accessible | current | This Table describes the BFD interface specific information. |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.2.1 | Rowh3cBfdIfEntry | not-accessible | current | This Entry describes the BFD interface specific information. |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.2.1.1 | Columnh3cBfdIfIndex | accessible-for-notify | current | This variable contains an index that represents a unique BFD interface on this device. |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.2.1.2 | Columnh3cBfdIfDesiredMinTxInterval | read-write | current | This variable defines the minimum interval, in microseconds, that the interface would like to use when transmitting BFD Control packets. |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.2.1.3 | Columnh3cBfdIfDesiredMinRxInterval | read-write | current | This variable defines the minimum interval, in, microseconds, between received BFD Control packets the local system is capable of supporting. |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.2.1.4 | Columnh3cBfdIfDetectMult | read-write | current | The desired detect time multiplier for BFD control packets. The negotiated control packet transmission interval, multiplied by this variable, will be the detec… |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.2.1.5 | Columnh3cBfdIfAuthType | read-only | current | The Authentication Type used for this interface. This field is valid only when the Authentication Present bit is set. The 'none' indicates the session doesn't … |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.3 | Tableh3cBfdSessTable | not-accessible | current | This table describes the BFD sessions. |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.3.1 | Rowh3cBfdSessEntry | not-accessible | current | This Entry describes the BFD sessions. |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.3.1.1 | Columnh3cBfdSessIfIndex | accessible-for-notify | current | This variable contains an interface's index under which the BFD session runs. |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.3.1.2 | Columnh3cBfdSessIndex | accessible-for-notify | current | This variable contains an index which represents a unique BFD session on this device. |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.3.1.3 | Columnh3cBfdSessAppSupportId | read-only | current | This variable contains an ID used to indicate a local application which owns or maintains this BFD session. Note, a BFD session can support several route proto… |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.3.1.4 | Columnh3cBfdSessLocalDiscr | read-only | current | This variable defines the local discriminator for this BFD session, used to uniquely identify it. |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.3.1.5 | Columnh3cBfdSessRemoteDiscr | read-only | current | This variable defines the session discriminator chosen by the remote system for this BFD session. |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.3.1.6 | Columnh3cBfdSessDstPort | read-only | current | The UDP Port for BFD. The default value is the well-known value for this port. |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.3.1.7 | Columnh3cBfdSessOperMode | read-only | current | This variable defines current operating mode that BFD session is running in. The primary mode which the BFD session runs in is known as Asynchronous mode. In t… |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.3.1.8 | Columnh3cBfdSessAddrType | read-only | current | This object defines IP address type of the interface associated with this BFD session. Only values unknown(0), ipv4(1) or ipv6(2) have to be supported. A value… |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.3.1.9 | Columnh3cBfdSessLocalAddr | read-only | current | This variable defines IP address of the local interface from which the BFD packets is transmitted. It can also be used to enabled BFD on a specific interface. … |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.3.1.10 | Columnh3cBfdSessRemoteAddr | read-only | current | This variable defines IP address of the remote interface from which the BFD packets is transmitted. It can also be used to enabled BFD on a specific interface.… |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.3.1.11 | Columnh3cBfdSessLocalDiag | read-only | current | The BFD diagnostic code for the BFD session was down with the neighbor. If no such event happens this object contains a zero value. |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.3.1.12 | Columnh3cBfdSessState | read-only | current | The state of the running BFD session. There are three states through which a session normally proceeds, two for establishing a session (Init and Up) and one fo… |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.3.1.13 | Columnh3cBfdSessControlPlanIndepFlag | read-only | current | This variable indicates whether the local system can continue to work while the control plane is out of work. Specifically, it is set to true(1) if the local s… |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.3.1.14 | Columnh3cBfdSessAuthFlag | read-only | current | This variable indicates that the local system wants to use Authentication. Specifically, it is set to true(1) if the local system wishes the session to be auth… |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.3.1.15 | Columnh3cBfdSessDemandModeFlag | read-only | current | This variable indicates that the local system wants to use Demand mode. Specifically, it is set to true(1) if the local system wishes to use Demand mode or fal… |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.4 | Tableh3cBfdSessStatTable | not-accessible | current | The table defines BFD session state. |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.4.1 | Rowh3cBfdSessStatEntry | not-accessible | current | An entry in this table is created by a BFD-enabled node for every BFD Session. It defines BFD session statistics. |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.4.1.1 | Columnh3cBfdSessStatPktInHC | read-only | current | The total number of BFD messages received by this BFD session. |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.4.1.2 | Columnh3cBfdSessStatPktOutHC | read-only | current | The total number of BFD messages sent by this BFD session. |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.4.1.3 | Columnh3cBfdSessStatDownCount | read-only | current | The number of times this session has gone into the Down state since the router last rebooted. |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.4.1.4 | Columnh3cBfdSessStatPktDiscard | read-only | current | The number of packets the local system has discarded since the router last rebooted. |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.4.1.5 | Columnh3cBfdSessStatPktLost | read-only | current | The number of packets the local system has failed to transmit since the router last rebooted. |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.5 | Tableh3cBfdSessPerfTable | not-accessible | current | The table defines BFD session performance. |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.5.1 | Rowh3cBfdSessPerfEntry | not-accessible | current | An entry in this table is created by a BFD-enabled node for every BFD session. It defines BFD Session performance. |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.5.1.1 | Columnh3cBfdSessPerfCreatTime | read-only | current | The value of sysUpTime when the session was created. If no such create event exists this object contains a zero value. |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.5.1.2 | Columnh3cBfdSessPerfLastUpTime | read-only | current | The value of sysUpTime when the last time communication was lost. If no such up event exists this variable contains a zero value. |
| 1.3.6.1.4.1.43.45.1.10.2.72.1.5.1.3 | Columnh3cBfdSessPerfLastDownTime | read-only | current | The value of sysUpTime when the last time communication was lost with the neighbor. If no such event exist this variable contains a zero value. |
| 1.3.6.1.4.1.43.45.1.10.2.72.2 | Nodeh3cBfdConformance |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BfdDiag | INTEGER { noDiagnostic(1), controlDetectionTimeExpired(2), echoFunctionFailed(3), neighborSignaledSessionDown(4), forwardingPlaneReset(5), pathDown(6), concatenatedPathDown(7), administrativelyDown(8), reverseConcatenatedPathDown(9) } | current | The diagnostic code is used by the BFD specifying the local system's reason for the last session state change, and must be initialized to zero(No Diagnostic). The 'noDiagnostic' means the session keeps state up. The 'co… |
| BfdInterval | Unsigned32 (1..4294967295) | current | A time interval delay in microseconds, which is used by the BFD. |
| BfdSessIndexTC | Unsigned32 (1..4294967295) | current | An index used to uniquely identify BFD sessions. |