A3COM-HUAWEI-MAC-INFORMATION-MIB
32 objects
This MIB file is to provide the definition of the MAC Information general configuration. MAC Information feature is used to make that the changed MAC information in the monitored device is knowable in remote monitoring device.
Imported Objects
| A3COM-HUAWEI-OID-MIB | h3cCommon |
| IF-MIB | ifIndex |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.45.1.10.2.87 | Identityh3cMACInformation | This MIB file is to provide the definition of the MAC Information general configuration. MAC Information feature is used to make that the changed MAC informati… | ||
| 1.3.6.1.4.1.43.45.1.10.2.87.1 | Nodeh3cMACInformationObjects | |||
| 1.3.6.1.4.1.43.45.1.10.2.87.1.1 | Nodeh3cMACInformationMibGlobal | |||
| 1.3.6.1.4.1.43.45.1.10.2.87.1.1.1 | Scalarh3cMACInformationEnabled | read-write | current | The value is a global setting. The feature will not work until the value is set to enabled(1). If the value is set to disabled(2), the feature will stop workin… |
| 1.3.6.1.4.1.43.45.1.10.2.87.1.1.2 | Scalarh3cMACInformationcSendInterval | read-write | current | The maximum interval that the device generate syslogs or traps. The unit is second. |
| 1.3.6.1.4.1.43.45.1.10.2.87.1.1.3 | Scalarh3cMACInformationLearntMACNum | read-only | current | The number of MAC addresses that learnt by the device since the h3cMACInformationEnabled is set to enabled(1) and h3cMACLearntEnable is set to enabled(1) at le… |
| 1.3.6.1.4.1.43.45.1.10.2.87.1.1.4 | Scalarh3cMACInformationRemovedMACNum | read-only | current | The number of MAC addresses that removed by the device since the h3cMACInformationEnabled is set to enabled(1) and h3cMACRemovedEnable is set to enabled(1) at … |
| 1.3.6.1.4.1.43.45.1.10.2.87.1.1.5 | Scalarh3cMACInformationTrapSendNum | read-only | current | The number of traps that have been generated. This object is valid only when the h3cMACInfomationWorkMode is set to trap(1). If the h3cMACInfomationWorkMode is… |
| 1.3.6.1.4.1.43.45.1.10.2.87.1.1.6 | Scalarh3cMACInformationSyslogSendNum | read-only | current | The number of syslogs that have been generated. This object is valid only when the h3cMACInfomationWorkMode is set to syslog(2). If the h3cMACInfomationWorkMod… |
| 1.3.6.1.4.1.43.45.1.10.2.87.1.1.7 | Scalarh3cMACInformationCacheLen | read-write | current | The maximum queue lenth used to cache the changed MAC addresses information in the monitored device. If the value is set to 0, syslog or trap will generate as … |
| 1.3.6.1.4.1.43.45.1.10.2.87.1.1.8 | Scalarh3cMACInfomationWorkMode | read-write | current | The working mode of MAC Information feature. If the object is set to trap(1), the device will use trap mode to notify the MAC address information and all prope… |
| 1.3.6.1.4.1.43.45.1.10.2.87.1.2 | Nodeh3cMACInformationMIBTableTroop | |||
| 1.3.6.1.4.1.43.45.1.10.2.87.1.2.1 | Tableh3cMACInfomationIfTable | not-accessible | current | The table is used to enable or disable the MAC Information feature on interfaces. |
| 1.3.6.1.4.1.43.45.1.10.2.87.1.2.1.1 | Rowh3cMACInfomationIfEntry | not-accessible | current | The entry of h3cMACInfomationIfTable. |
| 1.3.6.1.4.1.43.45.1.10.2.87.1.2.1.1.1 | Columnh3cMACLearntEnable | read-write | current | If the object is set to enabled(1) on interface, the device will cache the MAC address information that learnt on the interface. |
| 1.3.6.1.4.1.43.45.1.10.2.87.1.2.1.1.2 | Columnh3cMACRemovedEnable | read-write | current | If the object is set to enable(1) on interface, the device will cache the MAC address information that removed on the interface. |
| 1.3.6.1.4.1.43.45.1.10.2.87.1.3 | Nodeh3cMACInformationMibTrap | |||
| 1.3.6.1.4.1.43.45.1.10.2.87.1.3.0 | Nodeh3cMACInformationTraps | |||
| 1.3.6.1.4.1.43.45.1.10.2.87.1.3.0.1 | Notificationh3cMACInformationChangedTrap | current | When the cached number of MAC address information is reached the value specified by h3cMACInformationCacheLen, trap is generated and is sent to the remote moni… | |
| 1.3.6.1.4.1.43.45.1.10.2.87.1.3.2 | Nodeh3cMACInformationTrapObjects | |||
| 1.3.6.1.4.1.43.45.1.10.2.87.1.3.2.1 | Scalarh3cMACInfoTrapIndex | accessible-for-notify | current | The sequence number of trap information. When it reaches the maximum value, it should be set to 1. |
| 1.3.6.1.4.1.43.45.1.10.2.87.1.3.2.2 | Scalarh3cMACInfoTrapCount | accessible-for-notify | current | The cell number of the current trap information. The trap message may consists of more than one MAC address information. Each of the one MAC address informatio… |
| 1.3.6.1.4.1.43.45.1.10.2.87.1.3.2.3 | Scalarh3cMACInfoTrapMsg | accessible-for-notify | current | This object is the MAC information that learnt or removed in the monitored device. It can consists of more than one MAC information in the object. This object … |
| 1.3.6.1.4.1.43.45.1.10.2.87.1.4 | Nodeh3cMACInformationMibTrapExt | |||
| 1.3.6.1.4.1.43.45.1.10.2.87.1.4.0 | Nodeh3cMACInformationTrapsExt | |||
| 1.3.6.1.4.1.43.45.1.10.2.87.1.4.0.1 | Notificationh3cMACInformationChangedTrapExt | current | When the cached number of MAC address information is reached the value specified by h3cMACInformationCacheLen, trap is generated and is sent to the remote moni… | |
| 1.3.6.1.4.1.43.45.1.10.2.87.1.4.2 | Nodeh3cMACInformationTrapObjectsExt | |||
| 1.3.6.1.4.1.43.45.1.10.2.87.1.4.2.1 | Scalarh3cMACInfoTrapVerExt | accessible-for-notify | current | The version of trap information. |
| 1.3.6.1.4.1.43.45.1.10.2.87.1.4.2.2 | Scalarh3cMACInfoTrapIndexExt | accessible-for-notify | current | The sequence number of trap information. When it reaches the maximum value, it should be set to 1. |
| 1.3.6.1.4.1.43.45.1.10.2.87.1.4.2.3 | Scalarh3cMACInfoTrapCountExt | accessible-for-notify | current | The cell number of the current trap information. The trap message may consists of more than one MAC address information. Each of the one MAC address informatio… |
| 1.3.6.1.4.1.43.45.1.10.2.87.1.4.2.4 | Scalarh3cMACInfoTrapMsgExt | accessible-for-notify | current | This object is the MAC information that learnt or removed in the monitored device. It can consists of more than one MAC information in the object. This object … |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| H3cMACInfoWorkMode | INTEGER { trap(1), syslog(2) } | current | The working mode of the MAC Information feature. |