A3COM-HUAWEI-SNA-DLSW-MIB
138 objects
private mib for dlsw
Imported Objects
| A3COM-HUAWEI-OID-MIB | hwproducts |
| RFC1213-MIB | ifIndex |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | BEGIN IMPORTS DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.45.1.2.34 | Identitydlsw | private mib for dlsw | ||
| 1.3.6.1.4.1.43.45.1.2.34.1 | NodedlswNode | |||
| 1.3.6.1.4.1.43.45.1.2.34.1.1 | ScalardlswNodeVersion | read-only | current | This value identifies the particular version of the DLSw standard supported by this DLSw. The first octet is a hexadecimal value representing the DLSw standard… |
| 1.3.6.1.4.1.43.45.1.2.34.1.2 | ScalardlswNodeVendorID | read-only | current | The value identifies the manufacturer's IEEE-assigned organizationally Unique Identifier (OUI) of this DLSw. This information is reported in DLSw Capabilities … |
| 1.3.6.1.4.1.43.45.1.2.34.1.3 | ScalardlswNodeVersionString | read-only | current | This string gives product-specific information about this DLSw (e.g., product name, code release and fix level). This flows in Capabilities Exchange messages. |
| 1.3.6.1.4.1.43.45.1.2.34.1.4 | ScalardlswNodeStdPacingSupport | read-only | current | Circuit pacing, as defined in the DLSw Standard, allows each of the two DLSw nodes on a circuit to control the amount of data the other is permitted to send to… |
| 1.3.6.1.4.1.43.45.1.2.34.1.5 | ScalardlswNodeStatus | read-write | current | The status of the DLSw part of the system. |
| 1.3.6.1.4.1.43.45.1.2.34.1.6 | ScalardlswNodeUpTime | read-only | obsolete | The amount of time (in hundredths of a second) since the DLSw portion of the system was last re-initialized. That is, if dlswState is in the active state, the … |
| 1.3.6.1.4.1.43.45.1.2.34.1.7 | ScalardlswNodeVirtualSegmentLFSize | read-write | current | The largest frame size (including DLC header and info field but not any MAC-level or framing octets) this DLSw can forward on any path through itself. This obj… |
| 1.3.6.1.4.1.43.45.1.2.34.1.8 | ScalardlswNodeLocalAddr | read-write | current | Local peer ip address. |
| 1.3.6.1.4.1.43.45.1.2.34.1.9 | ScalardlswNodePriority | read-write | current | The priority value of local peer. 65535 expresses the value is unknown |
| 1.3.6.1.4.1.43.45.1.2.34.1.10 | ScalardlswNodeInitWindow | read-write | current | The vlaue of init-window. 65535 expresses the value is unknown |
| 1.3.6.1.4.1.43.45.1.2.34.1.11 | ScalardlswNodeKeepAlive | read-write | current | The vlaue of keepalive interval. 65535 expresses the value is unknown |
| 1.3.6.1.4.1.43.45.1.2.34.1.12 | ScalardlswNodeMaxWindow | read-write | current | The value of max-window. 65535 expresses the value is unknown |
| 1.3.6.1.4.1.43.45.1.2.34.1.13 | ScalardlswNodePermitDynamic | read-write | current | To accept connections from non-configured remote peers when permit-dynamic is setted. |
| 1.3.6.1.4.1.43.45.1.2.34.1.14 | ScalardlswNodeConnTimeout | read-write | current | Define connected state timer(The unit is a thousandth of a second). |
| 1.3.6.1.4.1.43.45.1.2.34.1.15 | ScalardlswNodeLocalPendTimeout | read-write | current | Define connected state timer(The unit is a thousandth of a second). |
| 1.3.6.1.4.1.43.45.1.2.34.1.16 | ScalardlswNodeRemotePendTimeout | read-write | current | Define connected state timer(The unit is a thousandth of a second). |
| 1.3.6.1.4.1.43.45.1.2.34.1.17 | ScalardlswNodeSnaCacheTimeout | read-write | current | Define connected state timer(The unit is a thousandth of a second). |
| 1.3.6.1.4.1.43.45.1.2.34.1.20 | NodedlswTrapControl | |||
| 1.3.6.1.4.1.43.45.1.2.34.1.20.1 | ScalardlswTrapCntlState | read-write | current | It is used to indicate whether the DLSw is permitted to emit traps. |
| 1.3.6.1.4.1.43.45.1.2.34.2 | NodedlswTConn | |||
| 1.3.6.1.4.1.43.45.1.2.34.2.1 | TabledlswRemotePeerTable | not-accessible | current | A list of tcp transport connections. |
| 1.3.6.1.4.1.43.45.1.2.34.2.1.1 | RowdlswRemotePeerEntry | not-accessible | current | A list of remote peer information |
| 1.3.6.1.4.1.43.45.1.2.34.2.1.1.1 | ColumndlswRemotePeerAddr | accessible-for-notify | current | The remote peer address for this transport connection. |
| 1.3.6.1.4.1.43.45.1.2.34.2.1.1.2 | ColumndlswRemotePeerVersion | read-only | current | This value identifies which version (first octet) and release (second octet) of the DLSw standard is supported by this partner DLSw. This information is obtain… |
| 1.3.6.1.4.1.43.45.1.2.34.2.1.1.3 | ColumndlswRemotePeerVendorID | read-only | current | This value identifies the IEEE-assigned organizationally Unique Identifier (OUI) of the maker of this partner DLSw. This information is obtained from a DLSw ca… |
| 1.3.6.1.4.1.43.45.1.2.34.2.1.1.4 | ColumndlswRemotePeerPaceWindInit | read-only | current | The value of the partner initial receive pacing window. This is our initial send pacing window for all new circuits on this transport connection, as modified a… |
| 1.3.6.1.4.1.43.45.1.2.34.2.1.1.5 | ColumndlswRemotePeerNumOfTcpSessions | read-only | obsolete | Number of TCP sessionss. |
| 1.3.6.1.4.1.43.45.1.2.34.2.1.1.6 | ColumndlswRemotePeerVersionString | read-only | current | This value identifies the particular product version (e.g., product name, code level, fix level) of this partner DLSw. The format of the actual version string … |
| 1.3.6.1.4.1.43.45.1.2.34.2.1.1.7 | ColumndlswRemotePeerIsConfig | read-only | current | The current remote peer is configrured when the value is 'yes'. |
| 1.3.6.1.4.1.43.45.1.2.34.2.1.1.8 | ColumndlswRemotePeerSetStateToConfig | read-only | obsolete | When the value is set 'yes' from 'no', dlswRemotePeerIsConfig will change from 'no' to 'yes'. |
| 1.3.6.1.4.1.43.45.1.2.34.2.1.1.9 | ColumndlswRemotePeerCost | read-write | current | The cost for remote peer. |
| 1.3.6.1.4.1.43.45.1.2.34.2.1.1.10 | ColumndlswRemotePeerKeepAlive | read-write | current | The keepalive interval value. |
| 1.3.6.1.4.1.43.45.1.2.34.2.1.1.11 | ColumndlswRemotePeerLf | read-write | current | The the largest frame size. |
| 1.3.6.1.4.1.43.45.1.2.34.2.1.1.12 | ColumndlswRemotePeerTcpQueneMax | read-write | current | The max tcp queue value. |
| 1.3.6.1.4.1.43.45.1.2.34.2.1.1.13 | ColumndlswRemotePeerHaveBackup | read-only | current | There is another remote peer whitch is configrued as the backup of the current remote peer . |
| 1.3.6.1.4.1.43.45.1.2.34.2.1.1.14 | ColumndlswRemotePeerIsBackup | read-only | current | The current remote peer is configrued as the backup of another configured remote peer . |
| 1.3.6.1.4.1.43.45.1.2.34.2.1.1.15 | ColumndlswRemotePeerBackupAddr | read-only | current | It is the IP ADDRESS of an configured remote peer of whitch the current remote peer is configrued as the backup |
| 1.3.6.1.4.1.43.45.1.2.34.2.1.1.16 | ColumndlswRemotePeerLinger | read-write | current | Buckup Peer linger |
| 1.3.6.1.4.1.43.45.1.2.34.2.1.1.17 | ColumndlswRemotePeerLinkState | read-only | current | The state of this tcp transport connection. |
| 1.3.6.1.4.1.43.45.1.2.34.2.1.1.18 | ColumndlswRemotePeerRecvPacks | read-only | current | The number of Switch-to-Switch Protocol (SSP) messages received on this tcp transport connection. |
| 1.3.6.1.4.1.43.45.1.2.34.2.1.1.19 | ColumndlswRemotePeerSendPacks | read-only | current | The number of Switch-to-Switch Protocol (SSP) messages sent on this tcp transport connection. |
| 1.3.6.1.4.1.43.45.1.2.34.2.1.1.20 | ColumndlswRemotePeerDrops | read-only | current | The number of Switch-to-Switch Protocol (SSP) messages dropped on this tcp transport connection. |
| 1.3.6.1.4.1.43.45.1.2.34.2.1.1.21 | ColumndlswRemotePeerUptime | read-only | current | The amount of time (in seconds ) since this transport connection last entered the 'connected' state. |
| 1.3.6.1.4.1.43.45.1.2.34.2.1.1.22 | ColumndlswRemotePeerEntryStatus | read-write | current | This object is used by the manager to create or delete the row entry in the dlswRemotePeerTable following the EntryStatus textual convention. |
| 1.3.6.1.4.1.43.45.1.2.34.3 | NodedlswBridgeGroup | |||
| 1.3.6.1.4.1.43.45.1.2.34.3.1 | TabledlswBridgeTable | not-accessible | current | The list of bridge group whitch has been created. |
| 1.3.6.1.4.1.43.45.1.2.34.3.1.1 | RowdlswBridgeEntry | not-accessible | current | The list of bridge information |
| 1.3.6.1.4.1.43.45.1.2.34.3.1.1.1 | ColumndlswBridgeNum | not-accessible | current | This value identifies the bridge number . |
| 1.3.6.1.4.1.43.45.1.2.34.3.1.1.2 | ColumndlswBridgeStatus | read-write | current | The 'DeleteLine' value means deleting a conceptual row object. The 'createLine' value means adding a conceptual row object. |
| 1.3.6.1.4.1.43.45.1.2.34.3.2 | TabledlswBridgeIfTable | not-accessible | current | The list of interfaces on which DLSw is active. |
| 1.3.6.1.4.1.43.45.1.2.34.3.2.1 | RowdlswBridgeIfEntry | not-accessible | current | The list of bridge interface information |
| 1.3.6.1.4.1.43.45.1.2.34.3.2.1.1 | ColumndlswBridgeIfBriGru | read-write | current | This value identifies the bridge number attached to the interface. |
| 1.3.6.1.4.1.43.45.1.2.34.3.2.1.2 | ColumndlswBridgeIfName | read-only | current | The name of the interface. |
| 1.3.6.1.4.1.43.45.1.2.34.3.2.1.3 | ColumndlswBridgeIfStatus | read-write | current | This value whitch is equal to 'invalid' identifies to delete a conceptual row |
| 1.3.6.1.4.1.43.45.1.2.34.4 | NodedlswLocDirectory | |||
| 1.3.6.1.4.1.43.45.1.2.34.4.1 | TabledlswLocMacTable | not-accessible | current | This table contains locations of MAC addresses. They are local and reachable |
| 1.3.6.1.4.1.43.45.1.2.34.4.1.1 | RowdlswLocMacEntry | not-accessible | current | Information of table |
| 1.3.6.1.4.1.43.45.1.2.34.4.1.1.1 | ColumndlswLocMacHashIndex | not-accessible | current | The hash value. |
| 1.3.6.1.4.1.43.45.1.2.34.4.1.1.2 | ColumndlswLocMacHashIndexSeqNum | not-accessible | current | The sequence num with smae hash value. |
| 1.3.6.1.4.1.43.45.1.2.34.4.1.1.3 | ColumndlswLocMacMac | read-only | current | The MAC address. |
| 1.3.6.1.4.1.43.45.1.2.34.4.1.1.4 | ColumndlswLocMacLocalInterfaceName | read-only | current | The value is the interface name when dlswLocMacLocationType is 'local'. |
| 1.3.6.1.4.1.43.45.1.2.34.5 | NodedlswCircuit | |||
| 1.3.6.1.4.1.43.45.1.2.34.5.1 | TabledlswCircuitTable | not-accessible | current | This table is the circuit representation in the DLSw entity. Virtual data links are used to represent any internal end stations. There is a conceptual row asso… |
| 1.3.6.1.4.1.43.45.1.2.34.5.1.1 | RowdlswCircuitEntry | not-accessible | current | the list of circuit information |
| 1.3.6.1.4.1.43.45.1.2.34.5.1.1.1 | ColumndlswCircuitS1CircuitId | accessible-for-notify | current | The Circuit ID assigned by this DLSw node to this circuit. The first four octets are the DLC port Id, and the second four octets are the Data Link Correlator. … |
| 1.3.6.1.4.1.43.45.1.2.34.5.1.1.2 | ColumndlswCircuitS1Mac | read-only | current | The MAC Address of End Station 1 (S1) used for this circuit. |
| 1.3.6.1.4.1.43.45.1.2.34.5.1.1.3 | ColumndlswCircuitS1Sap | read-only | current | The SAP at End Station 1 (S1) used for this circuit. |
| 1.3.6.1.4.1.43.45.1.2.34.5.1.1.4 | ColumndlswCircuitS2Mac | read-only | current | The MAC Address of End Station 2 (S2) used for this circuit. |
| 1.3.6.1.4.1.43.45.1.2.34.5.1.1.5 | ColumndlswCircuitS2Sap | read-only | current | The SAP at End Station 2 (S2) used for this circuit. |
| 1.3.6.1.4.1.43.45.1.2.34.5.1.1.6 | ColumndlswCircuitS1IfIndex | read-only | current | The ifEntry index of the local interface through which S1 can be reached. |
| 1.3.6.1.4.1.43.45.1.2.34.5.1.1.7 | ColumndlswCircuitS1Ifname | read-only | current | The name of the interface whose Ifdex is dlswCircuitS1IfIndex. |
| 1.3.6.1.4.1.43.45.1.2.34.5.1.1.8 | ColumndlswCircuitS1DlcType | read-only | current | The DLC protocol in use between the DLSw node and S1. |
| 1.3.6.1.4.1.43.45.1.2.34.5.1.1.9 | ColumndlswCircuitS2Location | read-only | obsolete | The location of End Station 2 (S2). If the location of End Station 2 is local, the interface information will be available in the conceptual row whose S1 and S… |
| 1.3.6.1.4.1.43.45.1.2.34.5.1.1.10 | ColumndlswCircuitS2TAddress | read-only | current | If the location of End Station 2 is remote, this object contains the address of the partner DLSw, else it will be an OCTET STRING of zero length. |
| 1.3.6.1.4.1.43.45.1.2.34.5.1.1.11 | ColumndlswCircuitS2CircuitId | read-only | current | The Circuit ID assigned to this circuit by the partner DLSw node. The first four octets are the DLC port Id, and the second four octets are the Data Link Corre… |
| 1.3.6.1.4.1.43.45.1.2.34.5.1.1.12 | ColumndlswCircuitOrigin | read-only | current | This object specifies which of the two end stations initiated the establishment of this circuit. |
| 1.3.6.1.4.1.43.45.1.2.34.5.1.1.13 | ColumndlswCircuitEntryTime | read-only | current | The amount of time (in hundredths of a second) since this circuit table conceptual row was created. |
| 1.3.6.1.4.1.43.45.1.2.34.5.1.1.14 | ColumndlswCircuitStateTime | read-only | current | The amount of time (in hundredths of a second) since this circuit entered the current state. |
| 1.3.6.1.4.1.43.45.1.2.34.5.1.1.15 | ColumndlswCircuitState | read-only | current | The current state of this circuit. The agent, implementation specific, may choose to keep entries for some period of time after circuit disconnect, so the mana… |
| 1.3.6.1.4.1.43.45.1.2.34.5.1.1.16 | ColumndlswCircuitPriority | read-only | obsolete | The transmission priority of this circuit as understood by this DLSw node. This value is determined by the two DLSw nodes at circuit startup time. If this DLSw… |
| 1.3.6.1.4.1.43.45.1.2.34.5.1.1.17 | ColumndlswCircuitFCSendGrantedUnits | read-only | current | The number of paced SSP messages that this DLSw is currently authorized to send on this circuit before it must stop and wait for an additional flow control ind… |
| 1.3.6.1.4.1.43.45.1.2.34.5.1.1.18 | ColumndlswCircuitFCSendCurrentWndw | read-only | current | The current window size that this DLSw is using in its role as a data sender. This is the value by which this DLSw would increase the number of messages it is … |
| 1.3.6.1.4.1.43.45.1.2.34.5.1.1.19 | ColumndlswCircuitFCRecvGrantedUnits | read-only | current | The current number of paced SSP messages that this DLSw has authorized the partner DLSw to send on this circuit before the partner DLSw must stop and wait for … |
| 1.3.6.1.4.1.43.45.1.2.34.5.1.1.20 | ColumndlswCircuitFCRecvCurrentWndw | read-only | current | The current window size that this DLSw is using in its role as a data receiver. This is the number of additional paced SSP messages that this DLSw would be aut… |
| 1.3.6.1.4.1.43.45.1.2.34.5.1.1.21 | ColumndlswCircuitFCLargestRecvGranted | read-only | obsolete | The largest receive window size granted by this DLSw during the current activation of this circuit. This is not the largest number of messages granted at any t… |
| 1.3.6.1.4.1.43.45.1.2.34.5.1.1.22 | ColumndlswCircuitFCLargestSendGranted | read-only | obsolete | The largest send (with respect to this DLSw) window size granted by the partner DLSw during the current activation of this circuit. The value zero should be re… |
| 1.3.6.1.4.1.43.45.1.2.34.6 | NodedlswSdlc | |||
| 1.3.6.1.4.1.43.45.1.2.34.6.1 | TabledlswSdlcPortTable | not-accessible | current | The table defines parameters for the interfaces with the encapunation of SDLC. |
| 1.3.6.1.4.1.43.45.1.2.34.6.1.1 | RowdlswSdlcPortEntry | not-accessible | current | Information of table |
| 1.3.6.1.4.1.43.45.1.2.34.6.1.1.1 | ColumndlswSdlcPortSerialName | read-only | current | The name of serial port. |
| 1.3.6.1.4.1.43.45.1.2.34.6.1.1.2 | ColumndlswSdlcPortEncap | read-only | current | The encapunation of the interface. |
| 1.3.6.1.4.1.43.45.1.2.34.6.1.1.3 | ColumndlswSdlcPortRole | read-write | current | The SDLC role of interface. |
| 1.3.6.1.4.1.43.45.1.2.34.6.1.1.4 | ColumndlswSdlcPortVmac | read-write | current | Define virtual mac address. |
| 1.3.6.1.4.1.43.45.1.2.34.6.1.1.5 | ColumndlswSdlcPortHoldq | read-write | current | Size of hold queue. |
| 1.3.6.1.4.1.43.45.1.2.34.6.1.1.6 | ColumndlswSdlcPortK | read-write | current | Size of local send window. |
| 1.3.6.1.4.1.43.45.1.2.34.6.1.1.7 | ColumndlswSdlcPortModule | read-write | current | Size of modulus. |
| 1.3.6.1.4.1.43.45.1.2.34.6.1.1.8 | ColumndlswSdlcPortN1 | read-write | current | Max number of bits for incoming frames. |
| 1.3.6.1.4.1.43.45.1.2.34.6.1.1.9 | ColumndlswSdlcPortN2 | read-write | current | Number of timers to retry an operation. |
| 1.3.6.1.4.1.43.45.1.2.34.6.1.1.10 | ColumndlswSdlcPortPollPauseTimer | read-write | current | Time between polls for each secondary SDLC station. The unit is thousandth of a second. |
| 1.3.6.1.4.1.43.45.1.2.34.6.1.1.11 | ColumndlswSdlcPortSimultaneousEnable | read-write | current | Activate SDLC two-way simultaneous mode. |
| 1.3.6.1.4.1.43.45.1.2.34.6.1.1.12 | ColumndlswSdlcPortT1 | read-write | current | Time to wait for a reply to a frame. |
| 1.3.6.1.4.1.43.45.1.2.34.6.1.1.13 | ColumndlswSdlcPortT2 | read-write | current | Time to wait for a reply used by secondary station. |
| 1.3.6.1.4.1.43.45.1.2.34.6.1.1.14 | ColumndlswSdlcPortNrziEncoding | read-write | obsolete | Set line code to nrzi encoding mode. |
| 1.3.6.1.4.1.43.45.1.2.34.6.1.1.15 | ColumndlswSdlcPortIdleMarkEnable | read-write | obsolete | Idle in mark mode. |
| 1.3.6.1.4.1.43.45.1.2.34.6.2 | TabledlswSdlcLsTable | not-accessible | current | The table defines the virtual MAC addresses for those SDLC link stations that participate in data link switching. |
| 1.3.6.1.4.1.43.45.1.2.34.6.2.1 | RowdlswSdlcLsEntry | not-accessible | current | Information of table |
| 1.3.6.1.4.1.43.45.1.2.34.6.2.1.1 | ColumndlswSdlcLsAddress | not-accessible | current | Define SDLC address. |
| 1.3.6.1.4.1.43.45.1.2.34.6.2.1.2 | ColumndlswSdlcLsLocalId | read-write | current | The value is XID. |
| 1.3.6.1.4.1.43.45.1.2.34.6.2.1.3 | ColumndlswSdlcLsRemoteMac | read-write | current | The MAC address to which DLSw should attempt to connect this link station. If this information is not available, a length of zero for this object should be ret… |
| 1.3.6.1.4.1.43.45.1.2.34.6.2.1.4 | ColumndlswSdlcLsSsap | read-write | current | Source SAP of partner. |
| 1.3.6.1.4.1.43.45.1.2.34.6.2.1.5 | ColumndlswSdlcLsDsap | read-write | current | Destination SAP of partner. |
| 1.3.6.1.4.1.43.45.1.2.34.6.2.1.6 | ColumndlswSdlcLsStatus | read-write | current | This object is used by the manager to create or delete the row entry in the DlswSdlcLsTable following the EntryStatus textual convention. |
| 1.3.6.1.4.1.43.45.1.2.34.7 | NodedlswLlc2 | |||
| 1.3.6.1.4.1.43.45.1.2.34.7.1 | TabledlswLlc2PortTable | not-accessible | current | The table defines parameters for the interfaces with the encapunation of Llc2. |
| 1.3.6.1.4.1.43.45.1.2.34.7.1.1 | RowdlswLlc2PortEntry | not-accessible | current | Information of table |
| 1.3.6.1.4.1.43.45.1.2.34.7.1.1.1 | ColumndlswLLC2PortAckDelayTime | read-write | current | Max time allows I-frames incoming without replay ACK. |
| 1.3.6.1.4.1.43.45.1.2.34.7.1.1.2 | ColumndlswLLC2PortAckMax | read-write | current | Max number of I-frames received before ACK. |
| 1.3.6.1.4.1.43.45.1.2.34.7.1.1.3 | ColumndlswLLC2PortLocalWnd | read-write | current | Max number of I-frames to send before received ACK. |
| 1.3.6.1.4.1.43.45.1.2.34.7.1.1.4 | ColumndlswLLC2PortModulus | read-write | current | Modulus of LLC2. |
| 1.3.6.1.4.1.43.45.1.2.34.7.1.1.5 | ColumndlswLLC2PortN2 | read-write | current | Retry times of operations. |
| 1.3.6.1.4.1.43.45.1.2.34.7.1.1.6 | ColumndlswLLC2PortT1 | read-write | current | Waiting for ACK time after sent a I-frame. |
| 1.3.6.1.4.1.43.45.1.2.34.7.1.1.7 | ColumndlswLLC2PortTbusyTime | read-write | current | Waiting time while other LLC2 station is in busy state. |
| 1.3.6.1.4.1.43.45.1.2.34.7.1.1.8 | ColumndlswLLC2PortTpfTime | read-write | current | Waiting time after a P frame is sent. |
| 1.3.6.1.4.1.43.45.1.2.34.7.1.1.9 | ColumndlswLLC2PortTrejTime | read-write | current | Waiting time after a REJ frame is sent. |
| 1.3.6.1.4.1.43.45.1.2.34.7.1.1.10 | ColumndlswLLC2PortTxqMax | read-write | current | Queue for sending llc2 I-frames. |
| 1.3.6.1.4.1.43.45.1.2.34.8 | NodedlswTraps | |||
| 1.3.6.1.4.1.43.45.1.2.34.8.0 | NodedlswTrapsV2 | |||
| 1.3.6.1.4.1.43.45.1.2.34.8.0.1 | NotificationdlswTrapTConnPartnerReject | current | This trap is sent each time a transport connection is rejected by a partner DLSw during Capabilities Exchanges. The emission of this trap is controlled by dlsw… | |
| 1.3.6.1.4.1.43.45.1.2.34.8.0.2 | NotificationdlswTrapTConnChangeState | current | This trap is sent each time a transport connection changes state. The emission of this trap is controlled by dlswTrapCntlState. | |
| 1.3.6.1.4.1.43.45.1.2.34.8.0.3 | NotificationdlswTrapCircuitChangeState | current | This trap is sent each time a circuit change state. The emission of this trap is controlled by dlswTrapCntlState. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CreateLineFlag | INTEGER { createLine(1), deleteLine(2) } | current | The 'DeleteLine' value means deleting a conceptual row object. The 'createLine' value means adding a conceptual row object. |
| DlcType | INTEGER { other (1), na (2), llc (3), sdlc (4), qllc (5) } | current | Representing the type of DLC of an end station, if applicable. |
| EndStationLocation | INTEGER { other (1), internal (2), remote (3), local (4) } | current | Representing the location of an end station related to the managed DLSw node. |
| EntryStatus | INTEGER { valid(1), createRequest(2), underCreation(3), invalid(4) } | current | The status of a table entry. |
| LFSize | INTEGER { lfs516(516), lfs1470(1470), lfs1500(1500), lfs2052(2052), lfs4472(4472), lfs8144(8144), lfs11407(11407), lfs11454(11454), lfs17800(17800), unknown(65535) } | current | The largest size of the INFO field (including DLC header, not including any MAC-level or framing octets). 64 valid values as defined by the IEEE 802.1D Addendum are acceptable. |
| MacAddressNC | OCTET STRING (SIZE (0 | 6)) | current | Represents an 802 MAC address represented in non-canonical format. That is, the most significant bit will be transmitted first. If this information is not available, the value is a zero length string. |