MIB Viewer

A3COM-HUAWEI-FLASH-MAN-MIB

87 objects
This MIB contains objects to manage flash cards and flash card operations. There are no constraints on this MIB.
Imported Objects
A3COM-HUAWEI-OID-MIBhuaweiUtility
ENTITY-MIBPhysicalIndex
INET-ADDRESS-MIBInetAddress InetAddressType
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks
SNMPv2-TCDisplayString RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.43.45.1.6.9Identityh3cFlashThis MIB contains objects to manage flash cards and flash card operations. There are no constraints on this MIB.
1.3.6.1.4.1.43.45.1.6.9.1Nodeh3cFlashManMIBObjects
1.3.6.1.4.1.43.45.1.6.9.1.1Nodeh3cFlashDevice
1.3.6.1.4.1.43.45.1.6.9.1.1.1Scalarh3cFlhSupportNumread-onlycurrentSpecifies the total number of flash which the system supported. The MIB should not be loaded if there is no flash in the system and so the value here will be a…
1.3.6.1.4.1.43.45.1.6.9.1.1.2Tableh3cFlashTablenot-accessiblecurrentThis table gives the properties of all the flashes on the system.
1.3.6.1.4.1.43.45.1.6.9.1.1.2.1Rowh3cFlashEntrynot-accessiblecurrentThe entry of h3cFlashTable.
1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.1Columnh3cFlhIndexread-onlycurrentThe index of h3cFlashTable. There are two parts for this index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++++++++ + entity index + random i…
1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.2Columnh3cFlhSizeread-onlycurrentSpecifies the total size of the flash device indexed by h3cFlhIndex. The value should be zero if the flash is removed for a removable device.
1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.3Columnh3cFlhPosread-onlycurrentThe position of the flash device in system. This object is an index of entPhysicalTable in ENTITY-MIB. If the value of this object is 0, the main processor is …
1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.4Columnh3cFlhNameread-onlycurrentThe flash name within the system.
1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.5Columnh3cFlhChipNumread-onlycurrentThe chip numbers in the flash.
1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.6Columnh3cFlhDescrread-onlycurrentDescription of the purpose of the flash in the system.
1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.8Columnh3cFlhInitTimeread-onlycurrentThe initialization time for the flash component or partition, recorded using the system time. This will be the boot time for a fixed device. For a removable co…
1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.9Columnh3cFlhRemovableread-onlycurrentThe value indicates whether the flash indexed can be removed or not. The true(1) value indicates the flash device CAN be removed.
1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.11Columnh3cFlhPartitionBoolread-writecurrentThe value indicates whether the flash indexed can be partitioned or not. The true(1) value indicates the flash CAN be partitioned.
1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.12Columnh3cFlhMinPartitionSizeread-onlycurrentMinimum partition size supported. If h3cFlhDevicePartitionBool is false, the value of this object is the same as h3cFlhSize.
1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.13Columnh3cFlhMaxPartitionsread-onlycurrentThe maximum count of partitions which the system supports for this flash. If h3cFlhPartitionBool is false, the object value is 1.
1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.14Columnh3cFlhPartitionNumread-onlycurrentThe actual number of partitions supported by the system for this flash. If h3cFlhPartitionBool is false, this value is 1.
1.3.6.1.4.1.43.45.1.6.9.1.1.2.1.15Columnh3cFlhKbyteSizeread-onlycurrentSpecifies the total size of the flash device indexed by h3cFlhIndex. The value should be zero if the flash is removed for a removable device.
1.3.6.1.4.1.43.45.1.6.9.1.1.3Nodeh3cFlashChips
1.3.6.1.4.1.43.45.1.6.9.1.1.3.1Tableh3cFlhChipTablenot-accessiblecurrentTable of properties for all flash chips. Used mainly for diagnostics.
1.3.6.1.4.1.43.45.1.6.9.1.1.3.1.1Rowh3cFlhChipEntrynot-accessiblecurrentThe entry of h3cFlhChipTable
1.3.6.1.4.1.43.45.1.6.9.1.1.3.1.1.1Columnh3cFlhChipSerialNonot-accessiblecurrentIndex of h3cFlhChipTable.
1.3.6.1.4.1.43.45.1.6.9.1.1.3.1.1.2Columnh3cFlhChipIDread-onlycurrentThe manufacturer code (the upper byte) and device code (the lower byte) for a chip. Unknown chip code is presented as 00:00.
1.3.6.1.4.1.43.45.1.6.9.1.1.3.1.1.3Columnh3cFlhChipDescrread-onlycurrentThe description of the flash chip.
1.3.6.1.4.1.43.45.1.6.9.1.1.3.1.1.4Columnh3cFlhChipWriteTimesLimitread-onlycurrentThe limit for the number of write times (retries) for a flash chip. If the limit is exceeded an error should be reported by the management station.
1.3.6.1.4.1.43.45.1.6.9.1.1.3.1.1.5Columnh3cFlhChipWriteTimesread-onlycurrentA count of write times (retries) for the flash chip since initialization. A count of 25 or more for a single chip indicates a write error. Management stations …
1.3.6.1.4.1.43.45.1.6.9.1.1.3.1.1.6Columnh3cFlhChipEraseTimesLimitread-onlycurrentThe limit for the number of erase times (retries) for a flash chip. If the limit is exceeded an error should be reported by the management station.
1.3.6.1.4.1.43.45.1.6.9.1.1.3.1.1.7Columnh3cFlhChipEraseTimesread-onlycurrentA count of erase times (retries) for the flash chip since initialization. A count of 2000 or more for a single chip indicates a write error. Management station…
1.3.6.1.4.1.43.45.1.6.9.1.1.4Nodeh3cFlashPartitions
1.3.6.1.4.1.43.45.1.6.9.1.1.4.1Tableh3cFlhPartitionTablenot-accessiblecurrentProperties for the flash partitions. Minimum of one entry in this table.
1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1Rowh3cFlhPartitionEntrynot-accessiblecurrentAn entry of the h3cFlhPartitionTable.Indexed by flash number and partition number.
1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.1Columnh3cFlhPartIndexnot-accessiblecurrentAn index which specifies a sequenced partition in the system.
1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.2Columnh3cFlhPartFirstChipread-onlycurrentThe first chip's sequence number in the partition, by which a chip can be indexed in chip table.
1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.3Columnh3cFlhPartLastChipread-onlycurrentThe last chip's sequence number in the partition, by which a chip can be indexed in chip table.
1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.4Columnh3cFlhPartSpaceread-onlycurrentThe total space of the flash partition. The following should be satisfied: h3cFlhPartSpace = n*h3cFlhMinPartitionSize
1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.5Columnh3cFlhPartSpaceFreeread-onlycurrentThe flash partition's free space.
1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.6Columnh3cFlhPartFileNumread-onlycurrentThe number of all the files in the flash partition.
1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.7Columnh3cFlhPartChecksumMethodread-onlycurrentThe Checksum method which the file system uses.
1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.8Columnh3cFlhPartStatusread-onlycurrentThe flash partition status.
1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.9Columnh3cFlhPartUpgradeModeread-onlycurrentThe upgrade mode of the Flash partition
1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.10Columnh3cFlhPartNameread-onlycurrentThe name of the flash partition given by the system.
1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.11Columnh3cFlhPartRequireEraseread-onlycurrentShows whether a write operation is conditional on partition erase.
1.3.6.1.4.1.43.45.1.6.9.1.1.4.1.1.12Columnh3cFlhPartFileNameLenread-onlycurrentThe maximum length of file name supported in the system.
1.3.6.1.4.1.43.45.1.6.9.1.1.4.2Nodeh3cFlhFiles
1.3.6.1.4.1.43.45.1.6.9.1.1.4.2.1Tableh3cFlhFileTablenot-accessiblecurrentTable of file information.
1.3.6.1.4.1.43.45.1.6.9.1.1.4.2.1.1Rowh3cFlhFileEntrynot-accessiblecurrentAn entry representing a file. Indexed using flash number, partition number, and file number.
1.3.6.1.4.1.43.45.1.6.9.1.1.4.2.1.1.1Columnh3cFlhFileIndexnot-accessiblecurrentIndex of the table, whose range is from 1 to 2147483647
1.3.6.1.4.1.43.45.1.6.9.1.1.4.2.1.1.2Columnh3cFlhFileNameread-onlycurrentA valid file name supported by the file system.
1.3.6.1.4.1.43.45.1.6.9.1.1.4.2.1.1.3Columnh3cFlhFileSizeread-onlycurrentThe file size in bytes excluding the file header of file system. The value should be greater than zero.
1.3.6.1.4.1.43.45.1.6.9.1.1.4.2.1.1.4Columnh3cFlhFileStatusread-onlycurrentThe status should be as follows: deleted(1): The file is in recycle bin. invalidChecksum(2): The checksum of file is invalid; valid(3): A valid file.
1.3.6.1.4.1.43.45.1.6.9.1.1.4.2.1.1.5Columnh3cFlhFileChecksumread-onlycurrentThe file checksum in the header of file.
1.3.6.1.4.1.43.45.1.6.9.1.2Nodeh3cFlashOperate
1.3.6.1.4.1.43.45.1.6.9.1.2.1Tableh3cFlhOpTablenot-accessiblecurrentTable used to operate flash.
1.3.6.1.4.1.43.45.1.6.9.1.2.1.1Rowh3cFlhOpEntrynot-accessiblecurrentNote an operation can not be stopped until it is finished. If notification is configured, NMS will receive a notification at the end of the operation. Entries …
1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.1Columnh3cFlhOperIndexnot-accessiblecurrentSpecifies the index of an entry. It is a random value when creating an entry.
1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.2Columnh3cFlhOperTyperead-createcurrentSpecifies the operation to be executed. net2FlashWithErase Copy a file to flash; erase flash beforehand. net2FlashWithoutErase Copy a file to flash; do not era…
1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.3Columnh3cFlhOperProtocolread-createcurrentSpecifies the protocol used to transfer file. The default protocol is ftp. when 'clusterftp' or 'clustertftp' is selected, the h3cFlhOperServerAddress needn't …
1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.4Columnh3cFlhOperServerAddressread-createdeprecatedThe address of remote host acting as server for operation. The default value is 255.255.255.255 This object is replaced by h3cFlhOperSrvAddrRev for it only sup…
1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.5Columnh3cFlhOperServerUserread-createcurrentWhen using ftp to transfer files, the user name must be specified through this node.
1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.6Columnh3cFlhOperPasswordread-createcurrentRemote user password for copying via ftp protocol. Optionally, This object may be ignored for protocols other than ftp.
1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.7Columnh3cFlhOperSourceFileread-createcurrentSpecifies the source file name to be transferred. It may be located on flash or remote server. It may include the file path if it is applicable. It must be spe…
1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.8Columnh3cFlhOperDestinationFileread-createcurrentSpecifies the destination file name. It may be located on flash or remote server. It may include the file path if it is applicable. If it is not specified, the…
1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.9Columnh3cFlhOperStatusread-onlycurrentThe status of operation.
1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.10Columnh3cFlhOperEndNotificationread-createcurrentIf the value of it is specified 'true', a notification will be generated at the end of the operation. Else no notification will be generated.
1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.11Columnh3cFlhOperProgressread-onlycurrentThe progress described as the time taken for the operation.
1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.12Columnh3cFlhOperRowStatusread-createcurrentThe row status of this table entry.
1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.13Columnh3cFlhOperServerPortread-createcurrentThe port of remote host acting as server for operation. If the value of this object is not specified, the server port is the known protocol port.
1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.14Columnh3cFlhOperFailReasonread-onlycurrentThe failure reasons of operation.
1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.15Columnh3cFlhOperSrvAddrTyperead-createcurrentThe type of IP address for h3cFlhOperSrvAddrRev.
1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.16Columnh3cFlhOperSrvAddrRevread-createcurrentThe address of remote host acting as server for operation.
1.3.6.1.4.1.43.45.1.6.9.1.2.1.1.17Columnh3cFlhOperSrvVPNNameread-createcurrentThe VPN instance of this operation uses.
1.3.6.1.4.1.43.45.1.6.9.1.3Nodeh3cFlashNotification
1.3.6.1.4.1.43.45.1.6.9.1.3.1Notificationh3cFlhOperNotificationcurrentA h3cFlhOperNotification is sent at the completion of a flash copy operation if h3cFlhOperEndNotification is true.
1.3.6.1.4.1.43.45.1.6.9.2Nodeh3cFlashMIBConformance
1.3.6.1.4.1.43.45.1.6.9.2.1Nodeh3cFlhMIBCompliances
1.3.6.1.4.1.43.45.1.6.9.2.1.1Complianceh3cFlhMIBCompliancecurrentThe statement of compliance for those implementing this MIB.
1.3.6.1.4.1.43.45.1.6.9.2.2Nodeh3cFlashMIBGroups
1.3.6.1.4.1.43.45.1.6.9.2.2.1Grouph3cFlhGroupcurrentA collection of objects on Flash level information.
1.3.6.1.4.1.43.45.1.6.9.2.2.3Grouph3cFlhChipGroupcurrentA collection of objects on chip level information.
1.3.6.1.4.1.43.45.1.6.9.2.2.4Grouph3cFlhPartitionGroupcurrentA collection of objects providing on partition level information.
1.3.6.1.4.1.43.45.1.6.9.2.2.5Grouph3cFlhFileGroupcurrentA collection of objects on file level information.
1.3.6.1.4.1.43.45.1.6.9.2.2.6Grouph3cFlhOperationGroupcurrentA collection of objects of flash operations.
1.3.6.1.4.1.43.45.1.6.9.2.2.7Grouph3cFlhNotificationGroupcurrentThe collection of notifications in the module
Type Definitions
NameSyntaxStatusDescription
H3cFlashOperationStatusINTEGER { opInProgress(1), opSuccess(2), opInvalid(3), opInvalidProtocol(4), opInvalidSourceName(5), opInvalidDestName(6), opInvalidServerAddress(7), opDeviceBusy(8), opDeviceOpenError(9), opDeviceError(10), opDeviceNotProgrammable(11), opDeviceFull(12), opFileOpenError(13), opFileTransferError(14), opFileChecksumError(15), opNoMemory(16), opAuthFail(17), opTimeout(18), opUnknownFailure(19), opDeleteFileOpenError(20), opDeleteInvalidDevice(21), opDeleteInvalidFunction(22), opDeleteOperationError(23), opDeleteInvalidFileName(24), opDeleteDeviceBusy(25), opDeleteParaError(26), opDeleteInvalidPath(27), opDeleteFileNotExistInSlave(28), opDeleteFileFailedInSlave(29), opSlaveFull(30), opCopyToSlaveFailure(31) }currentThe status of the specified operation can be one of the following. opInProgress : The operation is in process. opSuccess : The operation has been completed successfully. opInvalid : The command is invalid or command-pro…
H3cFlashPartitionStatusINTEGER { readOnly(1), runFromFlash(2), readWrite(3) }currentIf device is not programmable the value of it will be 'readOnly'; If the current image is running from this partition the value of it will be 'runFromFlash' If device is programmable the value of it will be 'readWrite'.
H3cFlashPartitionUpgradeModeINTEGER { unknown(1), rxbootFLH(2), direct(3) }currentFlash partition upgrade method, i.e., method by which new files can be downloaded into the partition. FLH stands for Flash Load Helper, a feature provided on run-from-Flash systems for upgrading Flash. This feature uses…
MIB Viewer