A3COM-HUAWEI-NTP-MIB
62 objects
This MIB provides mechanisms to monitor a NTP server.
Imported Objects
| A3COM-HUAWEI-OID-MIB | huaweiDatacomm |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.45.1.5.25.22 | IdentityhwNTP | This MIB provides mechanisms to monitor a NTP server. | ||
| 1.3.6.1.4.1.43.45.1.5.25.22.1 | NodehwNTPSystemMIB | |||
| 1.3.6.1.4.1.43.45.1.5.25.22.1.1 | NodehwNTPSystemMIBObjects | |||
| 1.3.6.1.4.1.43.45.1.5.25.22.1.1.1 | ScalarhwNTPSysLeap | read-only | current | Leap Indicator (LI): This is a two-bit code warning of an impending leap second to be inserted/deleted in the last minute of the current day, with bit 0 and bi… |
| 1.3.6.1.4.1.43.45.1.5.25.22.1.1.2 | ScalarhwNTPSysStratum | read-only | current | This is an eight-bit integer indicating the stratum level of the local clock, with values defined as follows: 0, unspecified 1, primary reference (e.g.,, radio… |
| 1.3.6.1.4.1.43.45.1.5.25.22.1.1.3 | ScalarhwNTPSysPrecision | read-only | current | Precision : This is a signed integer indicating the precision of the various clocks, in seconds to the nearest power of two. The value must be rounded to the n… |
| 1.3.6.1.4.1.43.45.1.5.25.22.1.1.4 | ScalarhwNTPSysRootdelay | read-only | current | Root Delay : This is a signed fixed-point number indicating the total roundtrip delay to the primary reference source at the root of the synchronization subnet… |
| 1.3.6.1.4.1.43.45.1.5.25.22.1.1.5 | ScalarhwNTPSysRootdispersion | read-only | current | Root Dispersion : This is a signed fixed-point number indicating the maximum error relative to the primary reference source at the root of the synchronization … |
| 1.3.6.1.4.1.43.45.1.5.25.22.1.1.6 | ScalarhwNTPSysRefid | read-only | current | Reference Clock Identifier : This is a 32-bit code identifying the particular reference clock. In the case of stratum 0 (unspecified) or stratum 1 (primary ref… |
| 1.3.6.1.4.1.43.45.1.5.25.22.1.1.7 | ScalarhwNTPSysReftime | read-only | current | Reference Timestamp : This is the local time, in timestamp format, when the local clock was last updated. If the local clock has never been synchronized, the v… |
| 1.3.6.1.4.1.43.45.1.5.25.22.1.1.8 | ScalarhwNTPSysPoll | read-only | current | Poll Interval : This is a signed integer indicating the minimum interval between transmitted messages, in seconds as a power of two. For instance, a value of s… |
| 1.3.6.1.4.1.43.45.1.5.25.22.1.1.9 | ScalarhwNTPSysPeer | read-only | current | This is a selector identifying the current synchronization source. Usually this will be a pointer to a structure containing the peer variables. The special val… |
| 1.3.6.1.4.1.43.45.1.5.25.22.1.1.10 | ScalarhwNTPSysState | read-only | current | This is a integer indicating the state of local clock. |
| 1.3.6.1.4.1.43.45.1.5.25.22.1.1.11 | ScalarhwNTPSysOffset | read-only | current | The offset of two clocks is the time difference between them, in milliseconds. |
| 1.3.6.1.4.1.43.45.1.5.25.22.1.1.12 | ScalarhwNTPSysDrift | read-only | current | Real clocks exhibit some variation in skew (second derivative of offset with time), which is called drift. |
| 1.3.6.1.4.1.43.45.1.5.25.22.1.1.13 | ScalarhwNTPSysCompliance | read-only | current | This is a string indicating the system error. |
| 1.3.6.1.4.1.43.45.1.5.25.22.1.1.14 | ScalarhwNTPSysClock | read-only | current | This is the current local time, in timestamp format. Local time is derived from the hardware clock of the particular machine and increments at intervals depend… |
| 1.3.6.1.4.1.43.45.1.5.25.22.1.1.15 | ScalarhwNTPSysStabil | read-only | current | This is a indicating that stability of a clock is how well it can maintain a constant frequency. |
| 1.3.6.1.4.1.43.45.1.5.25.22.1.1.16 | ScalarhwNTPSysAuthenticate | read-write | current | This is a integer indicating that system support authentication. |
| 1.3.6.1.4.1.43.45.1.5.25.22.1.1.17 | ScalarhwNTPSysPollSec | read-write | current | PollSec Interval : This is a integer indicating the minimum interval between transmitted messages. For instance, a value of six indicates a minimum interval of… |
| 1.3.6.1.4.1.43.45.1.5.25.22.1.1.18 | ScalarhwNTPSysClockSec | read-only | current | This is the current local time, in integer format. Local time is derived from the hardware clock of the particular machine and increments at intervals dependin… |
| 1.3.6.1.4.1.43.45.1.5.25.22.1.1.19 | ScalarhwNTPServerIP | read-write | current | The NTP server ip address. It must be a unicast address, rather than a broadcast address, a multicast address or the IP address of the local clock. To delete a… |
| 1.3.6.1.4.1.43.45.1.5.25.22.2 | NodehwNTPPeerMIB | |||
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1 | NodehwNTPPeerMIBObjects | |||
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1 | TablehwNTPPeerTable | not-accessible | current | This table provides information on the peers with which the local NTP server has associations. The peers are also NTP servers but running on different hosts. |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1 | RowhwNTPPeerEntry | not-accessible | current | Each peers' entry provides NTP information retrieved from a particular peer NTP server. Each peer is identified by a unique association identifier. Entries are… |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.1 | ColumnhwNTPPeerConfig | read-only | current | This is a bit indicating that the association was created from configuration information and should not be demobilized if the peer becomes unreachable. |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.2 | ColumnhwNTPPeerAuthenable | read-only | current | This is a bit indicating that system support authentication. |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.3 | ColumnhwNTPPeerAuthentic | read-only | current | This is a bit indicating that massage pass authentication which is authentic. |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.4 | ColumnhwNTPPeerRemAdr | not-accessible | current | The IP address of the peer. When creating a new association, a value for this object should be set before the row is made active. |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.5 | ColumnhwNTPPeerRemPort | read-only | current | The UDP port number on which the peer receives NTP messages. |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.6 | ColumnhwNTPPeerLocAdr | read-only | current | The IP address of the local host. Multi-homing can be supported using this object. |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.7 | ColumnhwNTPPeerLocPort | read-only | current | The UDP port number on which the local host receives NTP messages. |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.8 | ColumnhwNTPPeerLeap | read-only | current | This is a two-bit code warning of an impending leap second to be inserted in the NTP timescale. The bits are set before 23:59 on the day of insertion and reset… |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.9 | ColumnhwNTPPeerHMode | not-accessible | current | This is an integer indicating the association mode, with values coded as follows, 0, unspecified 1, symmetric active - A host operating in this mode sends peri… |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.10 | ColumnhwNTPPeerStratum | read-only | current | This is a integer indicating the stratum level of the local clock, with values defined as follows: 0, unspecified 1, primary reference (e.g.,, radio clock) 2-2… |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.11 | ColumnhwNTPPeerPPoll | read-only | current | The interval at which the peer polls the local host. |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.12 | ColumnhwNTPPeerHPoll | read-only | current | The interval at which the local host polls the peer. |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.13 | ColumnhwNTPPeerPrecision | read-only | current | This is a signed integer indicating the precision of the peer clock, in seconds to the nearest power of two. The value must be rounded to the next larger power… |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.14 | ColumnhwNTPPeerRootDelay | read-only | current | This is a signed fixed-point number indicating the total roundtrip delay to the primary reference source at the root of the synchronization subnet, in millisec… |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.15 | ColumnhwNTPPeerRootDispersion | read-only | current | This is a signed fixed-point number indicating the maximum error of the peer clock relative to the primary reference source at the root of the synchronization … |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.16 | ColumnhwNTPPeerRefId | read-only | current | The reference identifier of the peer. This is a 32-bit code identifying the particular reference clock. In the case of stratum 0 (unspecified) or stratum 1 (pr… |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.17 | ColumnhwNTPPeerRefTime | read-only | current | This is the local time at the peer, in timestamp format, when the local clock was last updated. If the local clock has never been synchronized, the value is ze… |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.18 | ColumnhwNTPPeerOrg | read-only | current | This is the local time, in timestamp format, at the peer when it's latest NTP message was sent. If the peer becomes unreachable the value is set to zero |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.19 | ColumnhwNTPPeerRec | read-only | current | This is the local time, in timestamp format, when the latest NTP message from the peer arrived. If the peer becomes unreachable the value is set to zero. |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.20 | ColumnhwNTPPeerXmt | read-only | current | This is the local time, in timestamp format, at which the NTP message departed the sender. |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.21 | ColumnhwNTPPeerReach | read-only | current | This is a shift register of NTP.WINDOW bits used to determine the reach ability status of the peer, with bits entering from the least significant (rightmost) e… |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.22 | ColumnhwNTPPeerValid | read-only | current | This is an integer counter indicating the valid samples remaining in the filter register. It is used to determine the reach ability state and when the poll int… |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.23 | ColumnhwNTPPeerTimer | read-only | current | This is an integer counter used to control the interval of transmitted NTP messages from the local host to the peer. |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.24 | ColumnhwNTPPeerDelay | read-only | current | This is a signed fixed-point number indicating the roundtrip delay of the peer clock relative to the local clock over the network path between them, in millise… |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.25 | ColumnhwNTPPeerOffset | read-only | current | This is a signed, fixed-point number indicating the offset of the peer clock relative to the local clock, in milliseconds. |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.26 | ColumnhwNTPPeerJitter | read-only | current | This is an indicating that peer of sample Variance |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.27 | ColumnhwNTPPeerDispersion | read-only | current | This is a signed fixed-point number indicating the maximum error of the peer clock relative to the local clock over the network path between them, in milliseco… |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.28 | ColumnhwNTPPeerKeyId | read-only | current | This is an unsigned integer identifying the cryptographic key used to generate the message-authentication code. |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.29 | ColumnhwNTPPeerFiltDelay | read-only | current | Round-trip delay of the peer clock relative to the local clock over the network path between them, in milliseconds. This variable can take on both positive and… |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.30 | ColumnhwNTPPeerFiltOffset | read-only | current | The offset of the peer clock relative to the local clock in milliseconds. |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.31 | ColumnhwNTPPeerFiltError | read-only | current | The maximum error of the peer clock relative to the local clock over the network path between them, in milliseconds. Only positive values greater than zero are… |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.32 | ColumnhwNTPPeerPMode | read-only | current | This is an integer indicating the association mode, with values coded as follows, 0, unspecified 1, symmetric active - A host operating in this mode sends peri… |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.33 | ColumnhwNTPPeerReceived | read-only | current | The number of received massages. |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.34 | ColumnhwNTPPeerSent | read-only | current | The number of send massages. |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.35 | ColumnhwNTPPeerFlash | read-only | current | The information about the massage. |
| 1.3.6.1.4.1.43.45.1.5.25.22.2.1.1.1.36 | ColumnhwNTPPeerRowStatus | read-create | current | The status object for this row. When a management station is creating a new row, it should set the value for cntpPeersPeerAddress at least, before the row can … |