A3COM-HUAWEI-IFQOS2-MIB
364 objects
Interface QoS management information base.
Imported Objects
| A3COM-HUAWEI-OID-MIB | h3cCommon |
| RFC1213-MIB | ifIndex |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.45.1.10.2.65 | Nodeh3cQos2 | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1 | Identityh3cIfQos2 | Interface QoS management information base. | ||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1 | Nodeh3cIfQoSHardwareQueueObjects | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.1 | Nodeh3cIfQoSHardwareQueueConfigGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.1.1 | Tableh3cIfQoSQSModeTable | not-accessible | current | A table of queue schedule mode information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.1.1.1 | Rowh3cIfQoSQSModeEntry | not-accessible | current | Queue schedule mode information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.1.1.1.1 | Columnh3cIfQoSQSMode | read-write | current | The mode of schedule. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.1.2 | Tableh3cIfQoSQSWeightTable | not-accessible | current | A table of queue schedule weight configuration information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.1.2.1 | Rowh3cIfQoSQSWeightEntry | not-accessible | current | Queue schedule weight configuration information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.1.2.1.1 | Columnh3cIfQoSQueueID | not-accessible | current | Queue ID |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.1.2.1.2 | Columnh3cIfQoSQueueGroupType | read-write | current | Group type of WRR and WFQ. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.1.2.1.3 | Columnh3cIfQoSQSType | read-write | current | Schedule type. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.1.2.1.4 | Columnh3cIfQoSQSValue | read-write | current | Schedule value. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.1.2.1.5 | Columnh3cIfQoSQSMaxDelay | read-write | current | Max delay. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.1.2.1.6 | Columnh3cIfQoSQSMinBandwidth | read-write | current | Min bandwidth. Unit: kbps. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2 | Nodeh3cIfQoSHardwareQueueRunInfoGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1 | Tableh3cIfQoSHardwareQueueRunInfoTable | not-accessible | current | A table of queue statistic information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1 | Rowh3cIfQoSHardwareQueueRunInfoEntry | not-accessible | current | Queue statistic information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.1 | Columnh3cIfQoSPassPackets | read-only | current | The number of forwarded packets. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.2 | Columnh3cIfQoSDropPackets | read-only | current | The number of dropped packets. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.3 | Columnh3cIfQoSPassBytes | read-only | current | The bytes of forwarded packets. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.4 | Columnh3cIfQoSPassPPS | read-only | current | The PPS of forwarded packets. PPS: packets per second. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.5 | Columnh3cIfQoSPassBPS | read-only | current | The BPS of forwarded packets. BPS: bytes per second. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.6 | Columnh3cIfQoSDropBytes | read-only | current | The bytes of dropped packets. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.7 | Columnh3cIfQoSQueueLengthInPkts | read-only | current | The max number of packets which the queue can hold. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.8 | Columnh3cIfQoSQueueLengthInBytes | read-only | current | The max bytes of packets which the queue can hold. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.9 | Columnh3cIfQoSCurQueuePkts | read-only | current | The number of packets in the current queue. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.10 | Columnh3cIfQoSCurQueueBytes | read-only | current | The bytes of packets in the current queue. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.11 | Columnh3cIfQoSCurQueuePPS | read-only | current | The PPS of packets in the current queue. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.12 | Columnh3cIfQoSCurQueueBPS | read-only | current | The BPS of packets in the current queue. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.13 | Columnh3cIfQoSTailDropPkts | read-only | current | The number of packets dropped by tail dropping. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.14 | Columnh3cIfQoSTailDropBytes | read-only | current | The bytes of packets dropped by tail dropping. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.15 | Columnh3cIfQoSTailDropPPS | read-only | current | The PPS of packets dropped by tail dropping. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.16 | Columnh3cIfQoSTailDropBPS | read-only | current | The BPS of packets dropped by tail dropping. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.17 | Columnh3cIfQoSWredDropPkts | read-only | current | The number of packets dropped by WRED. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.18 | Columnh3cIfQoSWredDropBytes | read-only | current | The bytes of packets dropped by WRED. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.19 | Columnh3cIfQoSWredDropPPS | read-only | current | The PPS of packets dropped by WRED. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.20 | Columnh3cIfQoSWredDropBPS | read-only | current | The BPS of packets dropped by WRED. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2 | Tableh3cIfQoSHQueueTcpRunInfoTable | not-accessible | current | A table of queue statistic information about TCP and non-TCP packets. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1 | Rowh3cIfQoSHQueueTcpRunInfoEntry | not-accessible | current | Queue statistic information entry about TCP and non-TCP packets. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.1 | Columnh3cIfQoSWredDropLPreNTcpPkts | read-only | current | The number of low-precedence non-TCP packets dropped by WRED. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.2 | Columnh3cIfQoSWredDropLPreNTcpBytes | read-only | current | The bytes of low-precedence non-TCP packets dropped by WRED. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.3 | Columnh3cIfQoSWredDropLPreNTcpPPS | read-only | current | The PPS of low-precedence non-TCP packets dropped by WRED. PPS: packets per second. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.4 | Columnh3cIfQoSWredDropLPreNTcpBPS | read-only | current | The BPS of low-precedence non-TCP packets dropped by WRED. BPS: bytes per second. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.5 | Columnh3cIfQoSWredDropLPreTcpPkts | read-only | current | The number of low-precedence TCP packets dropped by WRED. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.6 | Columnh3cIfQoSWredDropLPreTcpBytes | read-only | current | The bytes of low-precedence TCP packets dropped by WRED. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.7 | Columnh3cIfQoSWredDropLPreTcpPPS | read-only | current | The PPS of low-precedence TCP packets dropped by WRED. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.8 | Columnh3cIfQoSWredDropLPreTcpBPS | read-only | current | The BPS of low-precedence TCP packets dropped by WRED. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.9 | Columnh3cIfQoSWredDropHPreNTcpPkts | read-only | current | The number of high-precedence non-TCP packets dropped by WRED. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.10 | Columnh3cIfQoSWredDropHPreNTcpBytes | read-only | current | The bytes of high-precedence non-TCP packets dropped by WRED. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.11 | Columnh3cIfQoSWredDropHPreNTcpPPS | read-only | current | The PPS of high-precedence non-TCP packets dropped by WRED. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.12 | Columnh3cIfQoSWredDropHPreNTcpBPS | read-only | current | The BPS of high-precedence non-TCP packets dropped by WRED. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.13 | Columnh3cIfQoSWredDropHPreTcpPkts | read-only | current | The number of high-precedence TCP packets dropped by WRED. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.14 | Columnh3cIfQoSWredDropHPreTcpBytes | read-only | current | The bytes of high-precedence TCP packets dropped by WRED. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.15 | Columnh3cIfQoSWredDropHPreTcpPPS | read-only | current | The PPS of high-precedence TCP packets dropped by WRED. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.16 | Columnh3cIfQoSWredDropHPreTcpBPS | read-only | current | The BPS of high-precedence TCP packets dropped by WRED. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2 | Nodeh3cIfQoSSoftwareQueueObjects | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.1 | Nodeh3cIfQoSFIFOObject | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.1.1 | Tableh3cIfQoSFIFOConfigTable | not-accessible | current | A table of FIFO queue information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.1.1.1 | Rowh3cIfQoSFIFOConfigEntry | not-accessible | current | FIFO queue information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.1.1.1.1 | Columnh3cIfQoSFIFOMaxQueueLen | read-write | current | The maximum length of FIFO queue. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.1.2 | Tableh3cIfQoSFIFORunInfoTable | not-accessible | current | A table of FIFO queue statistic information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.1.2.1 | Rowh3cIfQoSFIFORunInfoEntry | not-accessible | current | FIFO queue statistic information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.1.2.1.1 | Columnh3cIfQoSFIFOSize | read-only | current | The number of packet in FIFO queue. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.1.2.1.2 | Columnh3cIfQoSFIFODiscardPackets | read-only | current | The number of discard packet. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.2 | Nodeh3cIfQoSPQObject | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1 | Nodeh3cIfQoSPQConfigGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.1 | Tableh3cIfQoSPQDefaultTable | not-accessible | current | A table of priority queue default configuration information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.1.1 | Rowh3cIfQoSPQDefaultEntry | not-accessible | current | Priority queue default configuration information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.1.1.1 | Columnh3cIfQoSPQListNumber | not-accessible | current | Priority queue list number. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.1.1.2 | Columnh3cIfQoSPQDefaultQueueType | read-write | current | Specify priority queue that packets put into by default. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.2 | Tableh3cIfQoSPQQueueLengthTable | not-accessible | current | A table of queue length of priority queue configuration information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.2.1 | Rowh3cIfQoSPQQueueLengthEntry | not-accessible | current | Queue length of priority queue configuration information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.2.1.1 | Columnh3cIfQoSPQQueueLengthType | not-accessible | current | Type of priority queue. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.2.1.2 | Columnh3cIfQoSPQQueueLengthValue | read-write | current | The size of priority queue. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.3 | Tableh3cIfQoSPQClassRuleTable | not-accessible | current | A table of class rule of priority queue information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.3.1 | Rowh3cIfQoSPQClassRuleEntry | not-accessible | current | A table of class rule of priority queue information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.3.1.1 | Columnh3cIfQoSPQClassRuleType | not-accessible | current | Type of class rule. 'ipall' means all ip packets. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.3.1.2 | Columnh3cIfQoSPQClassRuleValue | not-accessible | current | Value of class rule. interface : ifIndex ipv4acl : 2000..3999 ipv6acl : 2000..3999, 10000..42767 greater-than : 0..65535 less-than : 0..65535 tcp : 0..65535 ud… |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.3.1.3 | Columnh3cIfQoSPQClassRuleQueueType | read-create | current | Specify the queue for matched packets. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.3.1.4 | Columnh3cIfQoSPQClassRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.4 | Tableh3cIfQoSPQApplyTable | not-accessible | current | A table of priority queue instance. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.4.1 | Rowh3cIfQoSPQApplyEntry | not-accessible | current | Priority queue instance information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.4.1.1 | Columnh3cIfQoSPQApplyListNumber | read-create | current | Priority queue list number. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.4.1.2 | Columnh3cIfQoSPQApplyRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.2 | Nodeh3cIfQoSPQRunInfoGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.2.1 | Tableh3cIfQoSPQRunInfoTable | not-accessible | current | A table of priority queue statistic information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.2.1.1 | Rowh3cIfQoSPQRunInfoEntry | not-accessible | current | Priority queue statistic information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.2.1.1.1 | Columnh3cIfQoSPQType | not-accessible | current | The type of priority queue. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.2.1.1.2 | Columnh3cIfQoSPQSize | read-only | current | The number of packets in the priority queue. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.2.1.1.3 | Columnh3cIfQoSPQLength | read-only | current | The maximum length of priority queue. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.2.1.1.4 | Columnh3cIfQoSPQDiscardPackets | read-only | current | The packet number of priority queue discard. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.3 | Nodeh3cIfQoSCQObject | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1 | Nodeh3cIfQoSCQConfigGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.1 | Tableh3cIfQoSCQDefaultTable | not-accessible | current | A table of custom queue default configuration information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.1.1 | Rowh3cIfQoSCQDefaultEntry | not-accessible | current | Custom queue default configuration information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.1.1.1 | Columnh3cIfQoSCQListNumber | not-accessible | current | Custom queue list number. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.1.1.2 | Columnh3cIfQoSCQDefaultQueueID | read-write | current | Default queue ID. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.2 | Tableh3cIfQoSCQQueueLengthTable | not-accessible | current | A table of queue length of custom queue configuration information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.2.1 | Rowh3cIfQoSCQQueueLengthEntry | not-accessible | current | Queue length of custom queue configuration information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.2.1.1 | Columnh3cIfQoSCQQueueID | not-accessible | current | Custom queue index. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.2.1.2 | Columnh3cIfQoSCQQueueLength | read-write | current | The size of custom queue. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.2.1.3 | Columnh3cIfQoSCQQueueServing | read-write | current | The maximum bytes that the specified queue can transmit in each turn. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.3 | Tableh3cIfQoSCQClassRuleTable | not-accessible | current | A table of class rule of custom queue information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.3.1 | Rowh3cIfQoSCQClassRuleEntry | not-accessible | current | A table of class rule of custom queue information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.3.1.1 | Columnh3cIfQoSCQClassRuleType | not-accessible | current | Type of class rule. 'ipall' means all ip packets. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.3.1.2 | Columnh3cIfQoSCQClassRuleValue | not-accessible | current | Value of class rule. interface : ifIndex ipv4acl : 2000..3999 ipv6acl : 2000..42767 greater-than : 0..65535 less-than : 0..65535 tcp : 0..65535 udp : 0..65535 … |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.3.1.3 | Columnh3cIfQoSCQClassRuleQueueID | read-create | current | Specify the queue for matched packets. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.3.1.4 | Columnh3cIfQoSCQClassRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.4 | Tableh3cIfQoSCQApplyTable | not-accessible | current | A table of custom queue instance. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.4.1 | Rowh3cIfQoSCQApplyEntry | not-accessible | current | Custom queue instance information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.4.1.1 | Columnh3cIfQoSCQApplyListNumber | read-create | current | Custom queue list number. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.4.1.2 | Columnh3cIfQoSCQApplyRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.2 | Nodeh3cIfQoSCQRunInfoGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.2.1 | Tableh3cIfQoSCQRunInfoTable | not-accessible | current | A table of custom queue statistic information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.2.1.1 | Rowh3cIfQoSCQRunInfoEntry | not-accessible | current | Custom queue statistic information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.2.1.1.1 | Columnh3cIfQoSCQRunInfoSize | read-only | current | The number of packets in the custom queue. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.2.1.1.2 | Columnh3cIfQoSCQRunInfoLength | read-only | current | The maximum length of custom queue. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.2.1.1.3 | Columnh3cIfQoSCQRunInfoDiscardPackets | read-only | current | The packet number of custom queue discard. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.4 | Nodeh3cIfQoSWFQObject | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.1 | Nodeh3cIfQoSWFQConfigGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.1.1 | Tableh3cIfQoSWFQTable | not-accessible | current | A table of weighted fair queue information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.1.1.1 | Rowh3cIfQoSWFQEntry | not-accessible | current | Weighted fair queue information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.1.1.1.1 | Columnh3cIfQoSWFQQueueLength | read-create | current | The length of weighted fair queue. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.1.1.1.2 | Columnh3cIfQoSWFQQueueNumber | read-create | current | The number of weighted fair queue. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.1.1.1.3 | Columnh3cIfQoSWFQRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.1.1.1.4 | Columnh3cIfQoSWFQType | read-create | current | The type of weighted fair queue. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.2 | Nodeh3cIfQoSWFQRunInfoGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.2.1 | Tableh3cIfQoSWFQRunInfoTable | not-accessible | current | A table of weighted fair queue statistic information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.2.1.1 | Rowh3cIfQoSWFQRunInfoEntry | not-accessible | current | Weighted fair queue statistic information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.2.1.1.1 | Columnh3cIfQoSWFQSize | read-only | current | The number of packets in all the queues |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.2.1.1.2 | Columnh3cIfQoSWFQLength | read-only | current | The length of weighted fair queue. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.2.1.1.3 | Columnh3cIfQoSWFQDiscardPackets | read-only | current | The number of discarded packets in all the queues. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.2.1.1.4 | Columnh3cIfQoSWFQHashedActiveQueues | read-only | current | The number of active queues. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.2.1.1.5 | Columnh3cIfQoSWFQHashedMaxActiveQueues | read-only | current | The number of maximum active queues. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.2.1.1.6 | Columnh3fIfQosWFQhashedTotalQueues | read-only | current | The number of queues. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.5 | Nodeh3cIfQoSBandwidthGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.5.1 | Tableh3cIfQoSBandwidthTable | not-accessible | current | A table of bandwidth of interface information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.5.1.1 | Rowh3cIfQoSBandwidthEntry | not-accessible | current | Bandwidth information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.5.1.1.1 | Columnh3cIfQoSMaxBandwidth | read-create | current | The maximum bandwidth of interface. Unit : Kbps |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.5.1.1.2 | Columnh3cIfQoSReservedBandwidthPct | read-create | current | Max reserved bandwidth of the interface for QoS. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.5.1.1.3 | Columnh3cIfQoSBandwidthRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.6 | Nodeh3cIfQoSQmtokenGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.6.1 | Tableh3cIfQoSQmtokenTable | not-accessible | current | A table of qmtoken information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.6.1.1 | Rowh3cIfQoSQmtokenEntry | not-accessible | current | Qmtoken information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.6.1.1.1 | Columnh3cIfQoSQmtokenNumber | read-create | current | The number of tokens. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.6.1.1.2 | Columnh3cIfQoSQmtokenRosStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.7 | Nodeh3cIfQoSRTPQObject | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.1 | Nodeh3cIfQoSRTPQConfigGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.1.1 | Tableh3cIfQoSRTPQConfigTable | not-accessible | current | A table of Real-time protocol queue information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.1.1.1 | Rowh3cIfQoSRTPQConfigEntry | not-accessible | current | The information of Real-time protocol queue entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.1.1.1.1 | Columnh3cIfQoSRTPQStartPort | read-create | current | Minimum threshold of UDP destination port. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.1.1.1.2 | Columnh3cIfQoSRTPQEndPort | read-create | current | Maximum threshold of UDP destination port. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.1.1.1.3 | Columnh3cIfQoSRTPQReservedBandwidth | read-create | current | Maximum bandwidth. unit : kbps |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.1.1.1.4 | Columnh3cIfQoSRTPQCbs | read-create | current | Committed Burst Size. Unit: byte |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.1.1.1.5 | Columnh3cIfQoSRTPQRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.2 | Nodeh3cIfQoSRTPQRunInfoGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.2.1 | Tableh3cIfQoSRTPQRunInfoTable | not-accessible | current | A table of statistic information of Real-time protocol information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.2.1.1 | Rowh3cIfQoSRTPQRunInfoEntry | not-accessible | current | Statistic information of Real-time protocol information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.2.1.1.1 | Columnh3cIfQoSRTPQPacketNumber | read-only | current | The number of packets in the Real-time protocol queue. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.2.1.1.2 | Columnh3cIfQoSRTPQPacketSize | read-only | current | The size of Real-time protocol queue. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.2.1.1.3 | Columnh3cIfQoSRTPQOutputPackets | read-only | current | The number of output packets. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.2.1.1.4 | Columnh3cIfQoSRTPQDiscardPackets | read-only | current | The number of discard packets. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.8 | Nodeh3cIfQoSCarListObject | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.8.1 | Nodeh3cIfQoCarListGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.8.1.1 | Tableh3cIfQoSCarlTable | not-accessible | current | Committed Access Rate List(CARL) table. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.8.1.1.1 | Rowh3cIfQoSCarlEntry | not-accessible | current | CARL configuration infomation. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.8.1.1.1.1 | Columnh3cIfQoSCarlListNum | not-accessible | current | The index of the table, which is the CARL number. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.8.1.1.1.2 | Columnh3cIfQoSCarlParaType | read-create | current | Parameter type of the CARL number. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.8.1.1.1.3 | Columnh3cIfQoSCarlParaValue | read-create | current | Parameter value of the CARL table. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.2.8.1.1.1.4 | Columnh3cIfQoSCarlRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.3 | Nodeh3cIfQoSLineRateObjects | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.3.1 | Tableh3cIfQoSLRConfigTable | not-accessible | current | A table of line rate configuration information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.3.1.1 | Rowh3cIfQoSLRConfigEntry | not-accessible | current | Line rate configuration information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.3.1.1.1 | Columnh3cIfQoSLRDirection | not-accessible | current | Line rate on the inbound or outbound of data stream. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.3.1.1.2 | Columnh3cIfQoSLRCir | read-create | current | Committed Information Rate. Unit: kbps. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.3.1.1.3 | Columnh3cIfQoSLRCbs | read-create | current | Committed Burst Size. Unit: byte |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.3.1.1.4 | Columnh3cIfQoSLREbs | read-create | current | Excess Burst Size. Unit: byte. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.3.1.1.5 | Columnh3cIfQoSRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.3.1.1.6 | Columnh3cIfQoSLRPir | read-create | current | Peak Information Rate. Unit: kbps. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.3.2 | Tableh3cIfQoSLRRunInfoTable | not-accessible | current | A table of line rate run info information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.3.2.1 | Rowh3cIfQoSLRRunInfoEntry | not-accessible | current | Line rate run info information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.3.2.1.1 | Columnh3cIfQoSLRRunInfoPassedPackets | read-only | current | The number of passed packets. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.3.2.1.2 | Columnh3cIfQoSLRRunInfoPassedBytes | read-only | current | The number of passed bytes. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.3.2.1.3 | Columnh3cIfQoSLRRunInfoDelayedPackets | read-only | current | The number of delayed packets. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.3.2.1.4 | Columnh3cIfQoSLRRunInfoDelayedBytes | read-only | current | The number of delayed bytes. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.3.2.1.5 | Columnh3cIfQoSLRRunInfoActiveShaping | read-only | current | The flag of shaping. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4 | Nodeh3cIfQoSCARObjects | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1 | Nodeh3cIfQoSAggregativeCarGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.1 | Scalarh3cIfQoSAggregativeCarNextIndex | read-only | current | This object contains an appropriate value to be used for h3cIfQoSAggregativeCarIndex when creating rows in the h3cIfQoSAggregativeCarConfigTable. Begin with 1. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2 | Tableh3cIfQoSAggregativeCarConfigTable | not-accessible | current | A table of aggregative car information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1 | Rowh3cIfQoSAggregativeCarConfigEntry | not-accessible | current | Aggregative car information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.1 | Columnh3cIfQoSAggregativeCarIndex | not-accessible | current | The index of aggregative car. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.2 | Columnh3cIfQoSAggregativeCarName | read-create | current | The name of aggregative car. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.3 | Columnh3cIfQoSAggregativeCarCir | read-create | current | Committed-information-rate. Unit : kbps |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.4 | Columnh3cIfQoSAggregativeCarCbs | read-create | current | Committed-burst-size. Unit : byte |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.5 | Columnh3cIfQoSAggregativeCarEbs | read-create | current | Excess-burst-size. Unit : byte |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.6 | Columnh3cIfQoSAggregativeCarPir | read-create | current | Peak-information-rate. Unit : kbps |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.7 | Columnh3cIfQoSAggregativeCarGreenActionType | read-create | current | Supported green action: invalid(0), pass(1), discard(3), remark(4), remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10), Hardware QoS : pass, disca… |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.8 | Columnh3cIfQoSAggregativeCarGreenActionValue | read-create | current | The value is to remark When green action is remarking. For remark-dscp-pass, the range is 0~63; For remark-ip-pass and remark-mplsexp-pass, the range is 0~7; O… |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.9 | Columnh3cIfQoSAggregativeCarYellowActionType | read-create | current | Supported yellow action: invalid(0), pass(1), discard(3), remark(4), remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10), Hardware QoS : pass, disc… |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.10 | Columnh3cIfQoSAggregativeCarYellowActionValue | read-create | current | The value is to remark When yellow action is remarking. For remark-dscp-pass, the range is 0~63; For remark-ip-pass and remark-mplsexp-pass, the range is 0~7; … |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.11 | Columnh3cIfQoSAggregativeCarRedActionType | read-create | current | Supported red action: invalid(0), pass(1), discard(3), remark(4), remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10), Hardware QoS : pass, discard… |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.12 | Columnh3cIfQoSAggregativeCarRedActionValue | read-create | current | The value is to remark When red action is remarking. For remark-dscp-pass, the range is 0~63; For remark-ip-pass and remark-mplsexp-pass, the range is 0~7; Onl… |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.13 | Columnh3cIfQoSAggregativeCarType | read-create | current | The type of aggregative CAR. The enumeration 'aggregative' indicates that the ports with a same aggregative CAR use one token bulk. The enumeration 'notAggrega… |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.14 | Columnh3cIfQoSAggregativeCarRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.3 | Tableh3cIfQoSAggregativeCarApplyTable | not-accessible | current | A table of aggregative car instance. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.3.1 | Rowh3cIfQoSAggregativeCarApplyEntry | not-accessible | current | Aggregative car instance information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.3.1.1 | Columnh3cIfQoSAggregativeCarApplyDirection | not-accessible | current | Direction. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.3.1.2 | Columnh3cIfQoSAggregativeCarApplyRuleType | not-accessible | current | The type of class rule. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.3.1.3 | Columnh3cIfQoSAggregativeCarApplyRuleValue | not-accessible | current | The number of class rule. ipv4acl : 2000..5999 ipv6acl : 2000..42767 carl : 1..16 other types: 0. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.3.1.4 | Columnh3cIfQoSAggregativeCarApplyCarIndex | read-create | current | The index of aggregative car. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.3.1.5 | Columnh3cIfQoSAggregativeCarApplyRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.4 | Tableh3cIfQoSAggregativeCarRunInfoTable | not-accessible | current | A table of aggregative car statistic information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.4.1 | Rowh3cIfQoSAggregativeCarRunInfoEntry | not-accessible | current | Aggregative car statistic information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.4.1.1 | Columnh3cIfQoSAggregativeCarGreenPackets | read-only | current | Number of packets conforming CIR. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.4.1.2 | Columnh3cIfQoSAggregativeCarGreenBytes | read-only | current | Number of bytes conforming CIR |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.4.1.3 | Columnh3cIfQoSAggregativeCarYellowPackets | read-only | current | Number of yellow packets. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.4.1.4 | Columnh3cIfQoSAggregativeCarYellowBytes | read-only | current | Number of yellow bytes. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.4.1.5 | Columnh3cIfQoSAggregativeCarRedPackets | read-only | current | Number of packets exceeding CIR. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.4.1.6 | Columnh3cIfQoSAggregativeCarRedBytes | read-only | current | Number of bytes exceeding CIR. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.2 | Nodeh3cIfQoSTricolorCarGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1 | Tableh3cIfQoSTricolorCarConfigTable | not-accessible | current | A table of tricolor car configuration information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1 | Rowh3cIfQoSTricolorCarConfigEntry | not-accessible | current | Tricolor car configuration information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.1 | Columnh3cIfQoSTricolorCarDirection | not-accessible | current | Direction. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.2 | Columnh3cIfQoSTricolorCarType | not-accessible | current | The index of the table, which is the matching type for the packets on interface: ipv4acl, ipv6acl, carl, any. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.3 | Columnh3cIfQoSTricolorCarValue | not-accessible | current | The index of the table. ipv4acl: the number is ipv4 acl number; ipv6acl: the number is ipv6 acl number; carl: the number is CARL number; any: the number is 0; |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.4 | Columnh3cIfQoSTricolorCarCir | read-create | current | Committed Information Rate. Unit: kbps. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.5 | Columnh3cIfQoSTricolorCarCbs | read-create | current | Committed Burst Size. Unit: byte. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.6 | Columnh3cIfQoSTricolorCarEbs | read-create | current | Excess Burst Size. Unit: byte. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.7 | Columnh3cIfQoSTricolorCarPir | read-create | current | Peak Information Rate. Unit: kbps. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.8 | Columnh3cIfQoSTricolorCarGreenActionType | read-create | current | Green Action. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.9 | Columnh3cIfQoSTricolorCarGreenActionValue | read-create | current | The value is to remark when green action is remarking. For remark-dscp-continue and remark-dscp-pass, the range is 0~63; For remark-ip-continue and remark-ip-p… |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.10 | Columnh3cIfQoSTricolorCarYellowActionType | read-create | current | Yellow Action. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.11 | Columnh3cIfQoSTricolorCarYellowActionValue | read-create | current | The value is to remark when yellow action is remarking. For remark-dscp-continue and remark-dscp-pass, the range is 0~63; For remark-ip-continue and remark-ip-… |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.12 | Columnh3cIfQoSTricolorCarRedActionType | read-create | current | Red Action |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.13 | Columnh3cIfQoSTricolorCarRedActionValue | read-create | current | The value is to remark when red action is remarking. For remark-dscp-continue and remark-dscp-pass, the range is 0~63; For remark-ip-continue and remark-ip-pas… |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.14 | Columnh3cIfQoSTricolorCarRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.2 | Tableh3cIfQoSTricolorCarRunInfoTable | not-accessible | current | A table of tricolor car statistic information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.2.1 | Rowh3cIfQoSTricolorCarRunInfoEntry | not-accessible | current | Tricolor car statistic information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.2.1.1 | Columnh3cIfQoSTricolorCarGreenPackets | read-only | current | The number of green packets. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.2.1.2 | Columnh3cIfQoSTricolorCarGreenBytes | read-only | current | The number of green bytes. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.2.1.3 | Columnh3cIfQoSTricolorCarYellowPackets | read-only | current | The number of yellow packets. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.2.1.4 | Columnh3cIfQoSTricolorCarYellowBytes | read-only | current | The number of yellow bytes. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.2.1.5 | Columnh3cIfQoSTricolorCarRedPackets | read-only | current | The number of red packets. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.2.1.6 | Columnh3cIfQoSTricolorCarRedBytes | read-only | current | The number of red bytes. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.5 | Nodeh3cIfQoSGTSObjects | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.5.1 | Tableh3cIfQoSGTSConfigTable | not-accessible | current | A table of generic traffic shaping information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.5.1.1 | Rowh3cIfQoSGTSConfigEntry | not-accessible | current | Generic traffic shaping information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.5.1.1.1 | Columnh3cIfQoSGTSClassRuleType | not-accessible | current | The index of the table, which is the matching type for the packets on interface: ipv4acl, ipv6acl, any, queue. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.5.1.1.2 | Columnh3cIfQoSGTSClassRuleValue | not-accessible | current | Value of type. ipv4acl : 2000..4999 ipv6acl : 2000..42767 any : 0 queue : 0..7 |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.5.1.1.3 | Columnh3cIfQoSGTSCir | read-create | current | Committed Information Rate. Unit: kbps. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.5.1.1.4 | Columnh3cIfQoSGTSCbs | read-create | current | Committed Burst Size. Unit: byte. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.5.1.1.5 | Columnh3cIfQoSGTSEbs | read-create | current | Excess Burst Size. Unit: byte. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.5.1.1.6 | Columnh3cIfQoSGTSQueueLength | read-create | current | The length of queue. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.5.1.1.7 | Columnh3cIfQoSGTSConfigRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.5.2 | Tableh3cIfQoSGTSRunInfoTable | not-accessible | current | A table of generic traffic shaping's statistic information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.5.2.1 | Rowh3cIfQoSGTSRunInfoEntry | not-accessible | current | Generic traffic shaping's statistic information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.5.2.1.1 | Columnh3cIfQoSGTSQueueSize | read-only | current | The number of packets in the queue. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.5.2.1.2 | Columnh3cIfQoSGTSPassedPackets | read-only | current | The number of passed packets. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.5.2.1.3 | Columnh3cIfQoSGTSPassedBytes | read-only | current | The number of passed bytes. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.5.2.1.4 | Columnh3cIfQoSGTSDiscardPackets | read-only | current | The number of discard packets. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.5.2.1.5 | Columnh3cIfQoSGTSDiscardBytes | read-only | current | The number of discard bytes. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.5.2.1.6 | Columnh3cIfQoSGTSDelayedPackets | read-only | current | The number of delayed packets. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.5.2.1.7 | Columnh3cIfQoSGTSDelayedBytes | read-only | current | The number of delayed bytes. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6 | Nodeh3cIfQoSWREDObjects | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.1 | Nodeh3cIfQoSWredGroupGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.1 | Scalarh3cIfQoSWredGroupNextIndex | read-only | current | This object contains an appropriate value to be used for h3cIfQoSWredGroupIndex when creating rows in the h3cIfQoSWredGroupTable. Begin with 0. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.2 | Tableh3cIfQoSWredGroupTable | not-accessible | current | A table of WRED group information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.2.1 | Rowh3cIfQoSWredGroupEntry | not-accessible | current | WRED group information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.2.1.1 | Columnh3cIfQoSWredGroupIndex | not-accessible | current | WRED group index. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.2.1.2 | Columnh3cIfQoSWredGroupName | read-create | current | WRED group name. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.2.1.3 | Columnh3cIfQoSWredGroupType | read-create | current | Type of WRED group. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.2.1.4 | Columnh3cIfQoSWredGroupWeightingConstant | read-create | current | Exponent for WRED calculates the average length of queue. If 'h3cIfQoSWredGroupType' is 'queue', the object is ineffective. So, it must use the object, which i… |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.2.1.6 | Columnh3cIfQoSWredGroupRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.3 | Tableh3cIfQoSWredGroupContentTable | not-accessible | current | A table of priority WRED information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.3.1 | Rowh3cIfQoSWredGroupContentEntry | not-accessible | current | Priority WRED information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.3.1.1 | Columnh3cIfQoSWredGroupContentIndex | not-accessible | current | The priority of a packet. Different type of packet has different priority. Type of priority Range of priority dot1p 0..7 ippre 0..7 dscp 0..63 atmclp 0..1 frde… |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.3.1.2 | Columnh3cIfQoSWredGroupContentSubIndex | not-accessible | current | The sub index. Different type of packet has different value. Type of priority Range of value queue 0..2 other types : 0 |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.3.1.3 | Columnh3cIfQoSWredLowLimit | read-create | current | Discard low limit. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.3.1.4 | Columnh3cIfQoSWredHighLimit | read-create | current | Discard high limit. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.3.1.5 | Columnh3cIfQoSWredDiscardProb | read-create | current | Discard probability. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.3.1.6 | Columnh3cIfQoSWredGroupExponent | read-create | current | Exponent for WRED calculates the average length of queue. Only 'h3cIfQoSWredGroupType' is 'queue', the object is effective. This object is designed to indicate… |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.3.1.7 | Columnh3cIfQoSWredRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.4 | Tableh3cIfQoSWredGroupApplyIfTable | not-accessible | current | A table of WRED group applied interface information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.4.1 | Rowh3cIfQoSWredGroupApplyIfEntry | not-accessible | current | WRED group applied interface information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.4.1.1 | Columnh3cIfQoSWredGroupApplyIndex | read-create | current | WRED group index. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.4.1.2 | Columnh3cIfQoSWredGroupApplyName | read-only | current | WRED group name. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.4.1.3 | Columnh3cIfQoSWredGroupIfRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.5 | Tableh3cIfQoSWredApplyIfRunInfoTable | not-accessible | current | A table of WRED statistic information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.5.1 | Rowh3cIfQoSWredApplyIfRunInfoEntry | not-accessible | current | WRED statistic information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.5.1.1 | Columnh3cIfQoSWredPreRandomDropNum | read-only | current | The number of random drop. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.5.1.2 | Columnh3cIfQoSWredPreTailDropNum | read-only | current | The number of tail drop. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.2 | Nodeh3cIfQoSPortWredGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.1 | Tableh3cIfQoSPortWredWeightConstantTable | not-accessible | current | A table of port WRED configuration information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.1.1 | Rowh3cIfQoSPortWredWeightConstantEntry | not-accessible | current | Port WRED configuration information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.1.1.1 | Columnh3cIfQoSPortWredEnable | read-create | current | The object is used to enable or disable WRED function of the port. true: Enable WRED function of a port. false: Disable WRED function of a port. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.1.1.2 | Columnh3cIfQoSPortWredWeightConstant | read-create | current | Weight constant. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.1.1.3 | Columnh3cIfQoSPortWredWeightConstantRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.2 | Tableh3cIfQoSPortWredPreConfigTable | not-accessible | current | A table of weighted random early detect precedence configuration information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.2.1 | Rowh3cIfQoSPortWredPreConfigEntry | not-accessible | current | Weighted random early detect precedence configuration information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.2.1.1 | Columnh3cIfQoSPortWredPreID | not-accessible | current | IP precedence, from 0 to 7. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.2.1.2 | Columnh3cIfQoSPortWredPreLowLimit | read-create | current | Low Limit(number of packets) |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.2.1.3 | Columnh3cIfQoSPortWredPreHighLimit | read-create | current | High limit(number of packets) |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.2.1.4 | Columnh3cIfQoSPortWredPreDiscardProbability | read-create | current | Discard probability denominator |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.2.1.5 | Columnh3cIfQoSPortWredPreRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.3 | Tableh3cIfQoSPortWredRunInfoTable | not-accessible | current | A table of WRED statistic information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.3.1 | Rowh3cIfQoSPortWredRunInfoEntry | not-accessible | current | WRED statistic information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.3.1.1 | Columnh3cIfQoSWREDTailDropNum | read-only | current | The number of tail drop. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.3.1.2 | Columnh3cIfQoSWREDRandomDropNum | read-only | current | The number of random drop. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.7 | Nodeh3cIfQoSPortPriorityObjects | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.7.1 | Nodeh3cIfQoSPortPriorityConfigGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.7.1.1 | Tableh3cIfQoSPortPriorityTable | not-accessible | current | A table of priority of port information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.7.1.1.1 | Rowh3cIfQoSPortPriorityEntry | not-accessible | current | The priority of port information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.7.1.1.1.1 | Columnh3cIfQoSPortPriorityValue | read-write | current | The priority of port. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.7.1.2 | Tableh3cIfQoSPortPirorityTrustTable | not-accessible | current | A table of the trust-priority of port information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.7.1.2.1 | Rowh3cIfQoSPortPirorityTrustEntry | not-accessible | current | Trust-priority of port information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.7.1.2.1.1 | Columnh3cIfQoSPortPriorityTrustTrustType | read-write | current | The trust type of port. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.7.1.2.1.2 | Columnh3cIfQoSPortPriorityTrustOvercastType | read-write | current | The overcast type. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.9 | Nodeh3cIfQoSMapObjects | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.9.1 | Nodeh3cIfQoSPriMapConfigGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.9.1.1 | Scalarh3cIfQoSPriMapGroupNextIndex | read-only | current | This object contains an appropriate value to be used for h3cIfQoSPriMapGroupIndex when creating rows in the h3cIfQoSPriMapGroupTable. Begin with 64. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.9.1.2 | Tableh3cIfQoSPriMapGroupTable | not-accessible | current | A table of map group information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.9.1.2.1 | Rowh3cIfQoSPriMapGroupEntry | not-accessible | current | Map group information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.9.1.2.1.1 | Columnh3cIfQoSPriMapGroupIndex | not-accessible | current | The index of map, which are defined by system and user. The index of system defined map is 1 to 9. System defined map-name/map-index pairs like this: Map-index… |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.9.1.2.1.2 | Columnh3cIfQoSPriMapGroupType | read-create | current | The type of map group. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.9.1.2.1.3 | Columnh3cIfQoSPriMapGroupName | read-create | current | The name of map group. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.9.1.2.1.4 | Columnh3cIfQoSPriMapGroupRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.9.1.3 | Tableh3cIfQoSPriMapContentTable | not-accessible | current | A table of priority map configuration information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.9.1.3.1 | Rowh3cIfQoSPriMapContentEntry | not-accessible | current | Priority map configuration information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.9.1.3.1.1 | Columnh3cIfQoSPriMapGroupImportValue | not-accessible | current | Priority map table import value list. Different map has different h3cIfQoSPriMapConfigImportValue. Map-name Range of h3cIfQoSPriMapConfigImportValue dot1p-dp (… |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.9.1.3.1.2 | Columnh3cIfQoSPriMapGroupExportValue | read-create | current | Priority map table output. Different map has different h3cIfQoSPriMapGroupExportValue. dot1p-dp: 0..7 dot1p-dscp: 0..63 dot1p-lp: 0..7 dscp-dot1p: 0..7 dscp-dp… |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.9.1.3.1.3 | Columnh3cIfQoSPriMapContentRowStatus | read-create | current | RowStatus. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.10 | Nodeh3cIfQoSL3PlusObjects | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.10.1 | Nodeh3cIfQoSPortBindingGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.10.1.1 | Tableh3cIfQoSPortBindingTable | not-accessible | current | A table of EACL sub-interface binding information for L3+ board . |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.10.1.1.1 | Rowh3cIfQoSPortBindingEntry | not-accessible | current | Binding information entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.10.1.1.1.1 | Columnh3cIfQoSBindingIf | read-create | current | The binding interface. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.10.1.1.1.2 | Columnh3cIfQoSBindingRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.11 | Nodeh3cQoSTraStaObjects | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.11.1 | Nodeh3cQoSTraStaConfigGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.11.1.1 | Tableh3cQoSIfTraStaConfigInfoTable | not-accessible | current | A table of traffic statistics configuration information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.11.1.1.1 | Rowh3cQoSIfTraStaConfigInfoEntry | not-accessible | current | An entry of interface traffic statistics configuration information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.11.1.1.1.1 | Columnh3cQoSIfTraStaConfigDirection | not-accessible | current | The direction of the traffic statistics. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.11.1.1.1.2 | Columnh3cQoSIfTraStaConfigQueue | read-create | current | The bitmap of Queue ID. The octet specifies queues 0 through 7. If a bit has a value of '1', the corresponding queue is configured in the set of Queues; if a b… |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.11.1.1.1.3 | Columnh3cQoSIfTraStaConfigDot1p | read-create | current | The bitmap of Dot1p value. The octet specifies Dot1p values 0 through 7. If a bit has a value of '1', the corresponding Dot1p value is configured in the set of… |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.11.1.1.1.4 | Columnh3cQoSIfTraStaConfigDscp | read-create | current | The bitmap of Dscp value. Each octet within this value specifies a set of eight Dscp values, with the first octet specifying Dscp values 0 through 7, the secon… |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.11.1.1.1.5 | Columnh3cQoSIfTraStaConfigVlan | read-create | current | The bitmap of VLAN ID. Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 0 through 7, the second octet specify… |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.11.1.1.1.6 | Columnh3cQoSIfTraStaConfigStatus | read-create | current | The row status of this table entry. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.11.2 | Nodeh3cQoSTraStaRunGroup | |||
| 1.3.6.1.4.1.43.45.1.10.2.65.1.11.2.1 | Tableh3cQoSIfTraStaRunInfoTable | not-accessible | current | A table of traffic statistics running information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.11.2.1.1 | Rowh3cQoSIfTraStaRunInfoEntry | not-accessible | current | An entry of interface traffic statistics running information. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.11.2.1.1.1 | Columnh3cQoSIfTraStaRunObjectType | not-accessible | current | Type of statistics object. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.11.2.1.1.2 | Columnh3cQoSIfTraStaRunObjectValue | not-accessible | current | Value range for the object type: for Queue: 0~7 for Dot1p: 0~7 for Dscp: 0~63 for VlanID: 1~4094 |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.11.2.1.1.3 | Columnh3cQoSIfTraStaRunDirection | not-accessible | current | The direction of the traffic statistics. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.11.2.1.1.4 | Columnh3cQoSIfTraStaRunPassPackets | read-only | current | Number of passed packets. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.11.2.1.1.5 | Columnh3cQoSIfTraStaRunDropPackets | read-only | current | Number of dropped packets. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.11.2.1.1.6 | Columnh3cQoSIfTraStaRunPassBytes | read-only | current | Number of passed bytes. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.11.2.1.1.7 | Columnh3cQoSIfTraStaRunDropBytes | read-only | current | Number of dropped bytes. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.11.2.1.1.8 | Columnh3cQoSIfTraStaRunPassPPS | read-only | current | PPS (packets per second) of passed packets. |
| 1.3.6.1.4.1.43.45.1.10.2.65.1.11.2.1.1.9 | Columnh3cQoSIfTraStaRunPassBPS | read-only | current | BPS (bytes per second) of passed packets. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CarAction | INTEGER { invalid(0), pass(1), continue(2), discard(3), remark(4), remark-ip-continue(5), remark-ip-pass(6), remark-mplsexp-continue(7), remark-mplsexp-pass(8), remark-dscp-continue(9), remark-dscp-pass(10), remark-dot1p-continue(11), remark-dot1p-pass(12), remark-atm-clp-continue(13), remark-atm-clp-pass(14), remark-fr-de-continue(15), remark-fr-de-pass(16) } | current | The actions taken when packets conforming or exceeding the configured CIR. |
| Direction | INTEGER { inbound(1), outbound(2) } | current | Inbound or outbound. |
| PriorityQueue | INTEGER { top(1), middle(2), normal(3), bottom(4) } | current | The type of priority queue. |