A3Com-Bridge-r3-MIB
79 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | enterprises |
| RFC1286-MIB MISSING | MacAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43 | Nodea3Com | |||
| 1.3.6.1.4.1.43.2 | NodebrouterMIB | |||
| 1.3.6.1.4.1.43.2.9 | Nodea3ComBridge | |||
| 1.3.6.1.4.1.43.2.9.1 | Nodea3ComBrgGen | |||
| 1.3.6.1.4.1.43.2.9.1.1 | Scalara3ComBrgCtl | read-write | mandatory | This object determines whether bridging is performed by this system. If this is set to noBridging (2), all functions associated with bridging are disabled, inc… |
| 1.3.6.1.4.1.43.2.9.1.2 | Scalara3ComBrgAgeCtl | read-write | mandatory | This object determines whether nodes that have not transmitted packets for a specified amount of time are deleted from the forwarding table. If this object is … |
| 1.3.6.1.4.1.43.2.9.1.3 | Scalara3ComBrgFwallCtl | read-write | mandatory | This object is important when the system is performing both bridging and routing. When this is set to firewall (1), the bridge discards unicast packets of a pr… |
| 1.3.6.1.4.1.43.2.9.1.4 | Scalara3ComBrgLearnCtl | read-write | mandatory | This object determines whether the bridge creates and updates entries in its forwarding tables. |
| 1.3.6.1.4.1.43.2.9.1.5 | Scalara3ComBrgForwardCtl | read-write | mandatory | This object determines whether the bridge forwards packets. This has no effect on other bridging related functions, such as Spanning Tree, Learning, and Source… |
| 1.3.6.1.4.1.43.2.9.1.6 | Scalara3ComBrgAppleCtl | read-write | mandatory | This object enables the bridge to forward AppleTalk packets between Ethernet, FDDI, and token ring networks. The AppleTalk packets require encapsulation over F… |
| 1.3.6.1.4.1.43.2.9.1.7 | Scalara3ComBrgFwTblCtl | read-write | mandatory | This object is used to trigger actions taken on the static forwarding table. When this object is set to dynToStatic (2), all dynamically learned entries in the… |
| 1.3.6.1.4.1.43.2.9.1.8 | Scalara3ComBrgFwTblSize | read-write | mandatory | This object returns the size of the bridge forwarding table in units of 2^(9+n) where n is the value of this object. Thus, if this object has the value 2, then… |
| 1.3.6.1.4.1.43.2.9.1.9 | Scalara3ComBrgBLimitTimer | read-write | mandatory | This object is used to select the broadcast limit feature sample interval. That is, this object contains the value of the time interval over which the number o… |
| 1.3.6.1.4.1.43.2.9.1.10 | Tablea3ComBrgStExtTable | not-accessible | mandatory | This table is an extension of the dot1dStaticTable from the Bridge MIB, rfc1286. One additional column has been defined to identify the proper wide area addres… |
| 1.3.6.1.4.1.43.2.9.1.10.1 | Rowa3ComBrgStExtEntry | not-accessible | mandatory | An extension to the dot1dStaticTable from rfc1286. |
| 1.3.6.1.4.1.43.2.9.1.10.1.1 | Columna3ComBrgStExtAdd | read-only | mandatory | A unicast MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.4.1.43.2.9.1.10.1.2 | Columna3ComBrgStExtRcvPort | read-only | mandatory | Either the value '0' or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of ze… |
| 1.3.6.1.4.1.43.2.9.1.10.1.3 | Columna3ComBrgStExtWaAddress | read-only | mandatory | When the destination port to which this table entry applies is a wide area port, this object is used to identify the wide area address to use when forwarding p… |
| 1.3.6.1.4.1.43.2.9.1.11 | Tablea3ComBrgFdbExtTable | not-accessible | mandatory | This table is an extension of the dot1dTpFdbTable from the Bridge MIB, rfc1286. One additional column has been defined to identify the proper wide area address… |
| 1.3.6.1.4.1.43.2.9.1.11.1 | Rowa3ComBrgFdbExtEntry | not-accessible | mandatory | An extension to the dot1dTpFdbTable from rfc1286. |
| 1.3.6.1.4.1.43.2.9.1.11.1.1 | Columna3ComBrgFdbExtAdd | read-only | mandatory | A unicast MAC address for which the bridge has forwarding and/or filtering information. |
| 1.3.6.1.4.1.43.2.9.1.11.1.2 | Columna3ComBrgFdbExtWaAddress | read-only | mandatory | When the port to which this table entry applies is a wide area port, this object is used to identify the wide area address to use when forwarding packets to th… |
| 1.3.6.1.4.1.43.2.9.1.12 | Tablea3ComBrgPortTable | not-accessible | mandatory | This table is an extension of the dot1dBasePortTable from the Bridge MIB defined in RFC1286. This table contains generic information and control facilities for… |
| 1.3.6.1.4.1.43.2.9.1.12.1 | Rowa3ComBrgPortEntry | not-accessible | mandatory | Each entry in this table contains information and controls for a specific bridge port. |
| 1.3.6.1.4.1.43.2.9.1.12.1.1 | Columna3ComBrgPortIndex | read-only | mandatory | The port number of the port for which this entry contains bridge management information. |
| 1.3.6.1.4.1.43.2.9.1.12.1.2 | Columna3ComBrgPortCtl | read-write | mandatory | This object controls which type(s) of packets are bridged. This has no affect on whether the bridge participates in either the Spanning Tree or Source Route Pr… |
| 1.3.6.1.4.1.43.2.9.1.12.1.3 | Columna3ComBrgDstSecCtl | read-write | mandatory | This object is a security feature that allows the control of packets sent to specific destinations. If this object is set to forward (2), only those packets fo… |
| 1.3.6.1.4.1.43.2.9.1.12.1.4 | Columna3ComBrgSrcSecCtl | read-write | mandatory | This object is a security feature that allows the control of packets sent from specific source addresses. If this object is set to forward (2), this port will … |
| 1.3.6.1.4.1.43.2.9.1.12.1.5 | Columna3ComBrgX25Pid | read-write | mandatory | This object applies to transparent bridging over an X25 network. It specifies the protocol ID to be used in an outgoing X25 call. |
| 1.3.6.1.4.1.43.2.9.1.12.1.6 | Columna3ComBrgX25Qsize | read-write | deprecated | This object applies to transparent bridging over an X25 network. It allows the specification of the maximum number of packets that can be queued on any single … |
| 1.3.6.1.4.1.43.2.9.1.12.1.7 | Columna3ComBrgX25VcLimit | read-write | deprecated | This object allows the specification of the maximum number of virtual circuits to a specific DTE that can be established concurrently for transparent bridging … |
| 1.3.6.1.4.1.43.2.9.1.12.1.8 | Columna3ComBrgX25VcTimer | read-write | deprecated | This object specifies the maximum amount of time, in minutes, that can elapse when there is no activity on the x25 virtual circuit to a DTE before it is cleare… |
| 1.3.6.1.4.1.43.2.9.1.12.1.9 | Columna3ComBrgBroadCastLimit | read-write | mandatory | This object specifies the maximum rate, in packets per second, at which broadcast and multicast packets are forwarded through this port. If the number of these… |
| 1.3.6.1.4.1.43.2.9.1.12.1.10 | Columna3ComBrgSmdsGroupAddr | read-write | mandatory | This identifies the SMDS Group Address that is used by the bridge to transmit packets to all the other bridges identified by this SMDS Group Address. This addr… |
| 1.3.6.1.4.1.43.2.9.1.12.1.14 | Columna3ComBrgX25ProfId | read-write | mandatory | This object specifies the X25 User ProfileID to be used for selecting a Virtual Circuit to send Bridged Packets. Range is 0..255. If the value specified is 0 t… |
| 1.3.6.1.4.1.43.2.9.1.13 | Tablea3ComBrgX25NbrTable | not-accessible | mandatory | This table specifies the DTE address of each X25 neighbor that supports transparent bridging. The bridge will forward to the neighbors defined in this table al… |
| 1.3.6.1.4.1.43.2.9.1.13.1 | Rowa3ComBrgX25NbrEntry | not-accessible | mandatory | Each entry contains the DTE address of an X25 neighbor. |
| 1.3.6.1.4.1.43.2.9.1.13.1.1 | Columna3ComBrgX25NbrPort | read-only | mandatory | The bridge port to which this entry applies. |
| 1.3.6.1.4.1.43.2.9.1.13.1.2 | Columna3ComBrgX25NbrDTE | read-only | mandatory | The X121 address of the neighbor DTE. |
| 1.3.6.1.4.1.43.2.9.1.13.1.3 | Columna3ComBrgX25NbrStatus | read-write | mandatory | This object is used to add and delete entries in this table. See the notes describing RowStatus at the beginning of this MIB. |
| 1.3.6.1.4.1.43.2.9.2 | Nodea3ComBrgStp | |||
| 1.3.6.1.4.1.43.2.9.2.1 | Scalara3ComBrgStpMultAdd | read-only | mandatory | This is the multicast MAC address used by bridges running the Spanning Tree Protocol. |
| 1.3.6.1.4.1.43.2.9.2.2 | Scalara3ComBrgStpCtl | read-write | mandatory | This object is used to enable/disable the Spanning Tree Protocol for the bridge as a whole. |
| 1.3.6.1.4.1.43.2.9.2.3 | Scalara3ComBrgStpHopCtl | read-write | mandatory | This object determines whether the bridge considers the number of hops needed to forward a packet to the root bridge when it selects a root port. If hopReduce … |
| 1.3.6.1.4.1.43.2.9.3 | Nodea3ComBrgSr | |||
| 1.3.6.1.4.1.43.2.9.3.1 | Scalara3ComBrgSrMode | read-write | mandatory | This object defines the mode of source routing in use on the bridge. If ieee (1) is selected, explorer frames are modified and the forwarding path of the speci… |
| 1.3.6.1.4.1.43.2.9.3.2 | Tablea3ComBrgSrPortTable | not-accessible | mandatory | This table contains port specific source routing information. |
| 1.3.6.1.4.1.43.2.9.3.2.1 | Rowa3ComBrgSrPortEntry | not-accessible | mandatory | Each entry contains a set of information applied to a specific bridge port. |
| 1.3.6.1.4.1.43.2.9.3.2.1.1 | Columna3ComBrgSrPort | read-only | mandatory | This identifies the bridge port to which the other objects in this entry apply. |
| 1.3.6.1.4.1.43.2.9.3.2.1.2 | Columna3ComBrgSrPortSTEHopCount | read-write | mandatory | This object contains the maximum number of routing descriptors (ie, hop count) for Spanning Tree Explorer frames. |
| 1.3.6.1.4.1.43.2.9.3.2.1.3 | Columna3ComBrgSrPortAREHopCount | read-write | mandatory | This object contains the maximum number of routing descriptors (ie, hop count) for All Routes Explorer frames. |
| 1.3.6.1.4.1.43.2.9.3.2.1.4 | Columna3ComBrgSrPortHoldTime | read-write | mandatory | This parameter specifies the time interval, in minutes, that an inactive route entry can reside in the source routing table. |
| 1.3.6.1.4.1.43.2.9.3.2.1.5 | Columna3ComBrgSrPortMinAccessPrior | read-write | mandatory | This parameter determines the minimum access priority used for outoing frames on this port. End systems usually have a low access priority while bridges have a… |
| 1.3.6.1.4.1.43.2.9.3.3 | Tablea3ComBrgSrWanAddrTable | not-accessible | mandatory | A table containing mappings between Ring Number, Bridge Number, and Wide Area Addresses. This information is learned from Explorer Frames sent by end stations. |
| 1.3.6.1.4.1.43.2.9.3.3.1 | Rowa3ComBrgSrWanAddrEntry | not-accessible | mandatory | Each entry contains a single Ring Number, Bridge Number, Wide Area Address mapping. |
| 1.3.6.1.4.1.43.2.9.3.3.1.1 | Columna3ComBrgSrWAportIndex | read-only | mandatory | This identifies the bridge port that is connected to the ring identified by a3ComBrgSrWAringNum. |
| 1.3.6.1.4.1.43.2.9.3.3.1.2 | Columna3ComBrgSrWAringNum | read-only | mandatory | This identifies a specific wide area network. When a source route frame is bridged to this ring number, and to the bridge identified by a3ComBrgSrWAbrgNum, the… |
| 1.3.6.1.4.1.43.2.9.3.3.1.3 | Columna3ComBrgSrWAbrgNum | read-only | mandatory | This identifies the bridge associated with the Wide Area Address identified by a3ComBrgSrWAddress. |
| 1.3.6.1.4.1.43.2.9.3.3.1.4 | Columna3ComBrgSrWAddress | read-only | mandatory | This identifies the Wide Area Address associated with a specific ring number and bridge number. These are identified by the corresponding instances of a3ComBrg… |
| 1.3.6.1.4.1.43.2.9.3.4 | Scalara3ComBrgSrGwVirRing | read-write | mandatory | This parameter is used whenever SRTG is bridging packets between TB and SR domains. Before forwarding packets from a TB domain, SRTG specifically adds this 'vi… |
| 1.3.6.1.4.1.43.2.9.3.5 | Tablea3ComBrgSrGwContTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.2.9.3.5.1 | Rowa3ComBrgSrGwContEntry | not-accessible | mandatory | Each entry in this table control the behavior of the SRT Gateway feature for a specific port. |
| 1.3.6.1.4.1.43.2.9.3.5.1.1 | Columna3ComBrgSrGwContPort | read-only | mandatory | This identifies the bridge port to which the other objects in this entry apply. |
| 1.3.6.1.4.1.43.2.9.3.5.1.2 | Columna3ComBrgSrGwCont | read-write | mandatory | This parameter is used to enable or disable the SRT Gateway feature for this port. |
| 1.3.6.1.4.1.43.2.9.3.5.1.3 | Columna3ComBrgSrGwContEncapMode | read-write | mandatory | This parameter is used to control how packets using Token Ring LLC-based protocols are converted when bridged to Ethernet LANs. If this object has the value 'i… |
| 1.3.6.1.4.1.43.2.9.3.5.1.4 | Columna3ComBrgSrGwContAutoMode | read-write | mandatory | This parameter specifies whether or not the encapsulation format of each end stations is stored. |
| 1.3.6.1.4.1.43.2.9.3.6 | Tablea3ComBrgSrRDTable | not-accessible | mandatory | This table specifies whether end system source routing is enabled on for each port on the system. There are separate controls for each protocol that may use so… |
| 1.3.6.1.4.1.43.2.9.3.6.1 | Rowa3ComBrgSrRDEntry | not-accessible | mandatory | Each entry applies to a specific port. |
| 1.3.6.1.4.1.43.2.9.3.6.1.1 | Columna3ComBrgSrRDPort | read-only | mandatory | This identifies the bridge port to which the other objects in this entry apply. |
| 1.3.6.1.4.1.43.2.9.3.6.1.2 | Columna3ComBrgSrRDAppleTalk | read-write | mandatory | This specifies whether route discovery is initiated for AppleTalke end system packets. This discovery process occurs when a route to the end system does not ex… |
| 1.3.6.1.4.1.43.2.9.3.6.1.3 | Columna3ComBrgSrRDClnp | read-write | mandatory | This specifies whether route discovery is initiated for CLNP end system packets. This discovery process occurs when a route to the end system does not exist in… |
| 1.3.6.1.4.1.43.2.9.3.6.1.4 | Columna3ComBrgSrRDDecNet | read-write | mandatory | This specifies whether route discovery is initiated for DECNET end system packets. This discovery process occurs when a route to the end system does not exist … |
| 1.3.6.1.4.1.43.2.9.3.6.1.5 | Columna3ComBrgSrRDDlTest | read-write | mandatory | This specifies whether route discovery is initiated for DlTest end system packets. This discovery process occurs when a route to the end system does not exist … |
| 1.3.6.1.4.1.43.2.9.3.6.1.6 | Columna3ComBrgSrRDIp | read-write | mandatory | This specifies whether route discovery is initiated for IP end system packets. This discovery process occurs when a route to the end system does not exist in t… |
| 1.3.6.1.4.1.43.2.9.3.6.1.7 | Columna3ComBrgSrRDIpx | read-write | mandatory | This specifies whether route discovery is initiated for IPX end system packets. This discovery process occurs when a route to the end system does not exist in … |
| 1.3.6.1.4.1.43.2.9.3.6.1.8 | Columna3ComBrgSrRDLlc2 | read-write | mandatory | This specifies whether route discovery is initiated for LLC2 end system packets. This discovery process occurs when a route to the end system does not exist in… |
| 1.3.6.1.4.1.43.2.9.3.6.1.9 | Columna3ComBrgSrRDVines | read-write | mandatory | This specifies whether route discovery is initiated for Vines end system packets. This discovery process occurs when a route to the end system does not exist i… |
| 1.3.6.1.4.1.43.2.9.3.7 | Scalara3ComBrgSrTunVRing | read-only | deprecated | This object is used only by the Smart Filtering feature. |
| 1.3.6.1.4.1.43.2.9.3.8 | Scalara3ComBrgSrCNodeAddr | read-only | deprecated | This object is used only by the Smart Filtering feature. |