A3Com-DLSW-r1-MIB
145 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43 | Nodea3Com | |||
| 1.3.6.1.4.1.43.2 | NodebrouterMIB | |||
| 1.3.6.1.4.1.43.2.24 | NodedlswMIB-3Com | |||
| 1.3.6.1.4.1.43.2.24.1 | NodedlswNode | |||
| 1.3.6.1.4.1.43.2.24.1 | NodedlswTrapTConnUp | This trap is sent each time a transport connection enters `connected' state. | ||
| 1.3.6.1.4.1.43.2.24.1.1 | ScalardlswVersion | read-only | mandatory | This value identifies the particular version of the DLSw standard supported by this DLSw. The first hexdecimal value represents the DLSw standard Version numbe… |
| 1.3.6.1.4.1.43.2.24.1.2 | ScalardlswVendorID | read-only | mandatory | The value identifies the manufacturer-s IEEE assigned organizationally Unique Identifier (OUI) of this DLSw. This information is exchanged in DLSw Capabilities… |
| 1.3.6.1.4.1.43.2.24.1.3 | ScalardlswVersionString | read-only | mandatory | This value identifies the particular version number of this DLSw. The format of the actual version string is vendor-specific. This flows in Capabilities Exchan… |
| 1.3.6.1.4.1.43.2.24.1.4 | ScalardlswStdPacingSupport | read-only | mandatory | Adaptive pacing defined in the DLSw Standard allows the receiving end of the DLSw node to control the amount of data that can flow over the DLSw cloud. none (1… |
| 1.3.6.1.4.1.43.2.24.1.5 | ScalardlswStatus | read-write | mandatory | The status of DLSw part of the system. Changing the value from active to inactive causes DLSw to take the following actions: (1) disconnect all circuits throug… |
| 1.3.6.1.4.1.43.2.24.1.6 | ScalardlswUpTime | read-only | mandatory | The time (in hundredths of a second) since the DLSw portion of the system was last re-initialized. That is, if dlswState is in the active state, the time the d… |
| 1.3.6.1.4.1.43.2.24.1.7 | ScalardlswVirtualSegmentLFSize | read-write | mandatory | The largest size of the INFO field (LLC and above) that virtual segment can send/receive. It does not include any MAC level (framing) octets. This value will a… |
| 1.3.6.1.4.1.43.2.24.1.8 | ScalardlswResourceNBExclusivity | read-write | mandatory | The value of true identifies the NETBIOS Names that are configured in the dlswDirNBTable are the only ones accessible via this DLSw. Changes to this object tak… |
| 1.3.6.1.4.1.43.2.24.1.9 | ScalardlswResourceMacExclusivity | read-write | mandatory | The value of true identifies the MAC addresses that are configured in the dlswDirMacTable are the only ones accessible via this DLSw. Changes to this object ta… |
| 1.3.6.1.4.1.43.2.24.1.10 | NodedlswTrapControl | |||
| 1.3.6.1.4.1.43.2.24.1.10.3 | ScalardlswTrapCntlTConn | read-write | mandatory | Indicates whether the DLSw is permitted to emit transport connection up and down traps. With the value of `enabled' the DLSw will emit traps when connections e… |
| 1.3.6.1.4.1.43.2.24.1.10.4 | ScalardlswTrapCntlCircuit | read-write | mandatory | Indicates whether the DLSw is permitted to generate circuit up and down traps. With the value of `enabled' the DLSw will emit traps when circuits enter `connec… |
| 1.3.6.1.4.1.43.2.24.2 | NodedlswTConn | |||
| 1.3.6.1.4.1.43.2.24.2 | NodedlswTrapTConnDown | This trap is sent each time a transport connection enters `disconnected' state. | ||
| 1.3.6.1.4.1.43.2.24.2.1 | NodedlswTConnStat | |||
| 1.3.6.1.4.1.43.2.24.2.1.1 | ScalardlswTConnStatActiveConnections | read-only | mandatory | The number of transport connections are not in -disconnected- state. |
| 1.3.6.1.4.1.43.2.24.2.1.2 | ScalardlswTConnStatCloseIdles | read-only | mandatory | The number of DLSw connections exited connected state with all circuits disconnected gracefully. That is, the transport connection was brought down, by either … |
| 1.3.6.1.4.1.43.2.24.2.1.3 | ScalardlswTConnStatCloseBusys | read-only | mandatory | The number of DLSw connections exited connected state without all circuits disconnected gracefully. That is, the transport connection was brought down, by eith… |
| 1.3.6.1.4.1.43.2.24.2.2 | TabledlswTConnConfigTable | not-accessible | mandatory | This table defines the transport connections that will be initiated or accepted by this DLSw. Structure of masks allows wildcard definition for a collection of… |
| 1.3.6.1.4.1.43.2.24.2.2.1 | RowdlswTConnConfigEntry | not-accessible | mandatory | Each conceptual row defines a collection of transport connections. |
| 1.3.6.1.4.1.43.2.24.2.2.1.1 | ColumndlswTConnConfigIndex | read-only | mandatory | The index to the conceptual row of the table. Non-positive numbers are not allowed. There are objects defined that point to conceptual rows of this table with … |
| 1.3.6.1.4.1.43.2.24.2.2.1.2 | ColumndlswTConnConfigTDomain | read-write | mandatory | The object identifier which indicates the transport domain of this conceptual row. |
| 1.3.6.1.4.1.43.2.24.2.2.1.3 | ColumndlswTConnConfigLocalTAddr | read-write | mandatory | The local transport address for this conceptual row of the transport connection definition. |
| 1.3.6.1.4.1.43.2.24.2.2.1.4 | ColumndlswTConnConfigRemoteTAddr | read-write | mandatory | The remote transport address. Together with the dlswTConnConfigRemoteTAddrMask, the object instance of this conceptual row identifies a collection of the trans… |
| 1.3.6.1.4.1.43.2.24.2.2.1.5 | ColumndlswTConnConfigLastModifyTime | read-write | mandatory | The value of dlswUpTime when the value of any object in this conceptual row was last changed. This value may be compared to dlswTConnOperConnectTime to determi… |
| 1.3.6.1.4.1.43.2.24.2.2.1.6 | ColumndlswTConnConfigEntryType | read-write | mandatory | The object instance signifies the type of entry in the associated conceptual row. The value of -individual- means that the entry applies to a specific partner … |
| 1.3.6.1.4.1.43.2.24.2.2.1.7 | ColumndlswTConnConfigGroupDefinition | read-write | mandatory | For conceptual rows of -individual- and `global' as specified in dlswTConnConfigEntryType, the instance of this object is -0.0-. For conceptual rows of -group-… |
| 1.3.6.1.4.1.43.2.24.2.2.1.8 | ColumndlswTConnConfigSetupType | read-write | mandatory | This value of the instance of a conceptual row identifies the behavior of the collection of transport connections that this conceptual row defines. The value o… |
| 1.3.6.1.4.1.43.2.24.2.2.1.9 | ColumndlswTConnConfigSapList | read-write | mandatory | The SAP list indicates which SAPs are advertised to the transport connection defined by this conceptual row. Only SAPs with even numbers are represented, in th… |
| 1.3.6.1.4.1.43.2.24.2.2.1.10 | ColumndlswTConnConfigAdvertiseMacNB | read-write | mandatory | The value of true indicates that defined local MAC addresses and NetBIOS names will be advertised to a partner node via initial and (if supported) run-time cap… |
| 1.3.6.1.4.1.43.2.24.2.2.1.11 | ColumndlswTConnConfigInitCirRecvWndw | read-write | mandatory | The initial circuit receive pacing window size, in the unit of SSP messages, to be used for future transport connections activated using this table row. The ma… |
| 1.3.6.1.4.1.43.2.24.2.2.1.12 | ColumndlswTConnConfigOpens | read-only | mandatory | Number of times transport connections entered connected state according to the definition of this conceptual row. |
| 1.3.6.1.4.1.43.2.24.2.2.1.13 | ColumndlswTConnConfigRowStatus | read-write | mandatory | This object is used by a Management Station to create or delete the row entry in the dlswTConnConfigTable following the RowStatus textual convention. The value… |
| 1.3.6.1.4.1.43.2.24.2.3 | TabledlswTConnOperTable | not-accessible | mandatory | A list of transport connections. It is optional but desirable for an implementation to keep an entry for some period of time after the transport connection is … |
| 1.3.6.1.4.1.43.2.24.2.3.1 | RowdlswTConnOperEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.2.24.2.3.1.1 | ColumndlswTConnOperTDomain | read-only | mandatory | The object identifier indicates the transport domain of this transport connection. |
| 1.3.6.1.4.1.43.2.24.2.3.1.2 | ColumndlswTConnOperLocalTAddr | read-only | mandatory | The local transport address for this transport connection. This value could be different from dlswTConnConfigLocalAddr, if the value of the latter were changed… |
| 1.3.6.1.4.1.43.2.24.2.3.1.3 | ColumndlswTConnOperRemoteTAddr | read-only | mandatory | The remote transport address of this transport connection. |
| 1.3.6.1.4.1.43.2.24.2.3.1.4 | ColumndlswTConnOperEntryTime | read-only | mandatory | The value of dlswUpTime when this transport connection conceptual row was created. |
| 1.3.6.1.4.1.43.2.24.2.3.1.5 | ColumndlswTConnOperConnectTime | read-only | mandatory | The value of dlswUpTime when this transport connection last entered the -connected- state. A value of zero means this transport connection has never been estab… |
| 1.3.6.1.4.1.43.2.24.2.3.1.6 | ColumndlswTConnOperState | read-write | mandatory | The state of this transport connection. The transport connection enters -connecting- state when DLSw makes a connection request to the transport layer. Once in… |
| 1.3.6.1.4.1.43.2.24.2.3.1.7 | ColumndlswTConnOperConfigIndex | read-only | mandatory | The value of dlswTConnConfigIndex of the dlswTConnConfigEntry that governs the configuration information used by this dlswTConnOperEntry. A management station … |
| 1.3.6.1.4.1.43.2.24.2.3.1.8 | ColumndlswTConnOperFlowCntlMode | read-only | mandatory | The flow control mechanism in use on this transport connection. This value is undetermined (1) before the mode of flow control can be established on a new tran… |
| 1.3.6.1.4.1.43.2.24.2.3.1.9 | ColumndlswTConnOperPartnerVersion | read-only | mandatory | This value identifies which version (first octet) and release (second octect) of the DLSw standard is supported by this partner DLSw. This information is obtai… |
| 1.3.6.1.4.1.43.2.24.2.3.1.10 | ColumndlswTConnOperPartnerVendorID | read-only | mandatory | This value identifies the IEEE-assigned organizationally Unique Identifier (OUI) of the maker of this partner DLSw. This information is obtained from a DLSw ca… |
| 1.3.6.1.4.1.43.2.24.2.3.1.11 | ColumndlswTConnOperPartnerVersionStr | read-only | mandatory | This value identifies the particular product version (e.g., product name, code level, fix level) of this partner DLSw. The format of the actual version string … |
| 1.3.6.1.4.1.43.2.24.2.3.1.12 | ColumndlswTConnOperPartnerInitPacingWndw | read-only | mandatory | The value of the partner initial receive pacing window. This is our initial send pacing window for all new circuits on this transport connection, as modified a… |
| 1.3.6.1.4.1.43.2.24.2.3.1.13 | ColumndlswTConnOperPartnerSapList | read-write | mandatory | The Supported SAP List received in the capabilities exchange message from the partner DLSw. This list has the same format described for dlswTConnConfigSapList.… |
| 1.3.6.1.4.1.43.2.24.2.3.1.14 | ColumndlswTConnOperPartnerNBExcl | read-only | mandatory | The value of true signifies that the NetBIOS names received from this partner in the NetBIOS name list in its capabilities exchange message are the only NetBIO… |
| 1.3.6.1.4.1.43.2.24.2.3.1.15 | ColumndlswTConnOperPartnerMacExcl | read-only | mandatory | The value of true signifies that the MAC addresses received from this partner in the MAC address list in its capabilities exchange message are the only MAC add… |
| 1.3.6.1.4.1.43.2.24.2.3.1.16 | ColumndlswTConnOperPartnerNBInfo | read-only | mandatory | It is up to this DSLw whether to keep either none, some, or all of the NetBIOS name list that was received in the capabilities exchange message sent by this pa… |
| 1.3.6.1.4.1.43.2.24.2.3.1.17 | ColumndlswTConnOperPartnerMacInfo | read-only | mandatory | It is up to this DLSw whether to keep either none, some, or all of the MAC address list that was received in the capabilities exchange message sent by this par… |
| 1.3.6.1.4.1.43.2.24.2.3.1.18 | ColumndlswTConnOperDiscTime | read-only | mandatory | The value of dlswUpTime when dlswTConnOperState last entered -disconnected- state. |
| 1.3.6.1.4.1.43.2.24.2.3.1.19 | ColumndlswTConnOperDiscReason | read-only | mandatory | This object signifies the reason that either prevented the transport connection from entering the connected state, or caused the transport connection to enter … |
| 1.3.6.1.4.1.43.2.24.2.3.1.20 | ColumndlswTConnOperDiscActiveCir | read-only | mandatory | The number of circuits active (not in DISCONNECTED state) at the time the transport connection was last disconnected. This value is zero if the transport conne… |
| 1.3.6.1.4.1.43.2.24.2.3.1.21 | ColumndlswTConnOperInDataPkts | read-only | mandatory | The number of Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME received on this transport connection. |
| 1.3.6.1.4.1.43.2.24.2.3.1.22 | ColumndlswTConnOperOutDataPkts | read-only | mandatory | The number of Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME transmitted on this transport connection. |
| 1.3.6.1.4.1.43.2.24.2.3.1.23 | ColumndlswTConnOperInDataOctets | read-only | mandatory | The number octets in Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME received on this transport connection. Each message is… |
| 1.3.6.1.4.1.43.2.24.2.3.1.24 | ColumndlswTConnOperOutDataOctets | read-only | mandatory | The number octets in Switch-to-Switch Protocol (SSP) messages of type DGRMFRAME, DATAFRAME, or INFOFRAME transmitted on this transport connection. Each message… |
| 1.3.6.1.4.1.43.2.24.2.3.1.25 | ColumndlswTConnOperInCntlPkts | read-only | mandatory | The number of Switch-to-Switch Protocol (SSP) messages received on this transport connection which were not of type DGRMFRAME, DATAFRAME, or INFOFRAME. |
| 1.3.6.1.4.1.43.2.24.2.3.1.26 | ColumndlswTConnOperOutCntlPkts | read-only | mandatory | The number of Switch-to-Switch Protocol (SSP) messages of transmitted on this transport connection which were not of type DGRMFRAME, DATAFRAME, or INFOFRAME. |
| 1.3.6.1.4.1.43.2.24.2.3.1.27 | ColumndlswTConnOperCURexSents | read-only | mandatory | The number of CanUReach_ex messages sent on this transport connection. |
| 1.3.6.1.4.1.43.2.24.2.3.1.28 | ColumndlswTConnOperICRexRcvds | read-only | mandatory | The number of ICanReach_ex messages received on this transport connection. |
| 1.3.6.1.4.1.43.2.24.2.3.1.29 | ColumndlswTConnOperCURexRcvds | read-only | mandatory | The number of CanUReach_ex messages received on this transport connection. |
| 1.3.6.1.4.1.43.2.24.2.3.1.30 | ColumndlswTConnOperICRexSents | read-only | mandatory | The number of ICanReach_ex messages sent on this transport connection. |
| 1.3.6.1.4.1.43.2.24.2.3.1.31 | ColumndlswTConnOperNQexSents | read-only | mandatory | The number of NetBIOS_NQ_ex (NetBIOS Name Query-explorer) messages sent on this transport connection. |
| 1.3.6.1.4.1.43.2.24.2.3.1.32 | ColumndlswTConnOperNRexRcvds | read-only | mandatory | The number of NETBIOS_NR_ex (NetBIOS Name Recognized-explorer) messages received on this transport connection. |
| 1.3.6.1.4.1.43.2.24.2.3.1.33 | ColumndlswTConnOperNQexRcvds | read-only | mandatory | The number of NETBIOS_NQ_ex messages received on this transport connection. |
| 1.3.6.1.4.1.43.2.24.2.3.1.34 | ColumndlswTConnOperNRexSents | read-only | mandatory | The number of NETBIOS_NR_ex messages sent on this transport connection. |
| 1.3.6.1.4.1.43.2.24.2.3.1.35 | ColumndlswTConnOperCirCreates | read-only | mandatory | The number of times that circuits entered -circuit_established- state (not counting transitions from -circuit_restart-). |
| 1.3.6.1.4.1.43.2.24.2.3.1.36 | ColumndlswTConnOperCircuits | read-only | mandatory | The number of currently active circuits on this transport connection, where -active- means not in -disconnected- state. |
| 1.3.6.1.4.1.43.2.24.3 | NodedlswInterface | |||
| 1.3.6.1.4.1.43.2.24.3 | NodedlswTrapCircuitUp | This trap is sent each time a circuit enters `connected' state. | ||
| 1.3.6.1.4.1.43.2.24.4 | NodedlswDirectory | |||
| 1.3.6.1.4.1.43.2.24.4 | NodedlswTrapCircuitDown | This trap is sent each time a circuit enters `disconnected' state. | ||
| 1.3.6.1.4.1.43.2.24.4.1 | NodedlswDirStat | |||
| 1.3.6.1.4.1.43.2.24.4.1.1 | ScalardlswDirMacEntries | read-only | mandatory | The current total number of entries in the dlswDirMacTable. |
| 1.3.6.1.4.1.43.2.24.4.1.4 | ScalardlswDirNBEntries | read-only | mandatory | The current total number of entries in the dlswDirNBTable. |
| 1.3.6.1.4.1.43.2.24.4.2 | NodedlswDirCache | |||
| 1.3.6.1.4.1.43.2.24.4.2.1 | TabledlswDirMacTable | not-accessible | mandatory | This table contains locations of MAC addresses. They could be either verified or not verified, local or remote, and configured locally or learned from either C… |
| 1.3.6.1.4.1.43.2.24.4.2.1.1 | RowdlswDirMacEntry | not-accessible | mandatory | Indexed by dlswDirMacIndex. |
| 1.3.6.1.4.1.43.2.24.4.2.1.1.1 | ColumndlswDirMacIndex | read-only | mandatory | Uniquely identifies a conceptual row of this table. |
| 1.3.6.1.4.1.43.2.24.4.2.1.1.2 | ColumndlswDirMacMac | read-only | mandatory | The MAC address, together with the dlswDirMacMask, specifies a set of MAC addresses that are defined or discovered through an interface or partner DLSw nodes. |
| 1.3.6.1.4.1.43.2.24.4.2.1.1.3 | ColumndlswDirMacMask | read-only | mandatory | The MAC address mask, together with the dlswDirMacMac, specifies a set of MAC addresses that are defined or discovered through an interface or partner DLSw nod… |
| 1.3.6.1.4.1.43.2.24.4.2.1.1.4 | ColumndlswDirMacEntryType | read-only | mandatory | The cause of the creation of this conceptual row. It could be one of the three methods: (1) user configured, including via management protocol set operations, … |
| 1.3.6.1.4.1.43.2.24.4.2.1.1.5 | ColumndlswDirMacLocationType | read-only | mandatory | The location of the resource (or a collection of resources using a mask) of this conceptual row is either (1) local - the resource is reachable via an interfac… |
| 1.3.6.1.4.1.43.2.24.4.2.1.1.6 | ColumndlswDirMacLocation | read-only | mandatory | Points to either the ifEntry, dlswTConnConfigEntry, dlswTConnOperEntry, 0.0, or something that is implementation specific. It identifies the location of the MA… |
| 1.3.6.1.4.1.43.2.24.4.2.1.1.7 | ColumndlswDirMacStatus | read-only | mandatory | This object specifies whether DLSw currently believes the MAC address to be accessible at the specified location. The value `notReachable' allows a configured … |
| 1.3.6.1.4.1.43.2.24.4.2.1.1.8 | ColumndlswDirMacLFSize | read-only | mandatory | The largest size of the MAC INFO field (LLC header and data) that a circuit to the MAC address can carry through this path. |
| 1.3.6.1.4.1.43.2.24.4.2.1.1.9 | ColumndlswDirMacRowStatus | read-only | mandatory | This object is used by a Management Station to create or delete the row entry in the dlswDirMacTable following the RowStatus textual convention. |
| 1.3.6.1.4.1.43.2.24.4.2.2 | TabledlswDirNBTable | not-accessible | mandatory | This table contains locations of NetBIOS names. They could be either verified or not verified, local or remote, and configured locally or learned from either C… |
| 1.3.6.1.4.1.43.2.24.4.2.2.1 | RowdlswDirNBEntry | not-accessible | mandatory | Indexed by dlswDirNBIndex. |
| 1.3.6.1.4.1.43.2.24.4.2.2.1.1 | ColumndlswDirNBIndex | read-only | mandatory | Uniquely identifies a conceptual row of this table. |
| 1.3.6.1.4.1.43.2.24.4.2.2.1.2 | ColumndlswDirNBName | read-only | mandatory | The NetBIOS name (including `any char' and `wildcard' characters) specifies a set of NetBIOS names that are defined or discovered through an interface or partn… |
| 1.3.6.1.4.1.43.2.24.4.2.2.1.3 | ColumndlswDirNBNameType | read-only | mandatory | Whether dlswDirNBName represents an (or a set of) individual or group NetBIOS name(s). |
| 1.3.6.1.4.1.43.2.24.4.2.2.1.4 | ColumndlswDirNBEntryType | read-only | mandatory | The cause of the creation of this conceptual row. It could be one of the three methods: (1) user configured, including via management protocol set operations, … |
| 1.3.6.1.4.1.43.2.24.4.2.2.1.5 | ColumndlswDirNBLocationType | read-only | mandatory | The location of the resource (or a collection of resources using any char/wildcard characters) of this conceptual row is either (1) local - the resource is rea… |
| 1.3.6.1.4.1.43.2.24.4.2.2.1.6 | ColumndlswDirNBLocation | read-only | mandatory | Points to either the ifEntry, dlswTConnConfigEntry, dlswTConnOperEntry, 0.0, or something that is implementation specific. It identifies the location of the Ne… |
| 1.3.6.1.4.1.43.2.24.4.2.2.1.7 | ColumndlswDirNBStatus | read-only | mandatory | This object specifies whether DLSw currently believes the NetBIOS name to be accessible at the specified location. The value `notReachable' allows a configured… |
| 1.3.6.1.4.1.43.2.24.4.2.2.1.8 | ColumndlswDirNBLFSize | read-only | mandatory | The largest size of the MAC INFO field (LLC header and data) that a circuit to the NB name can carry through this path. |
| 1.3.6.1.4.1.43.2.24.4.2.2.1.9 | ColumndlswDirNBRowStatus | read-only | mandatory | This object is used by a Management Station to create or delete the row entry in the dlswDirNBTable following the RowStatus textual convention. |
| 1.3.6.1.4.1.43.2.24.5 | NodedlswCircuit | |||
| 1.3.6.1.4.1.43.2.24.5.1 | NodedlswCircuitStat | |||
| 1.3.6.1.4.1.43.2.24.5.1.1 | ScalardlswActiveCircuits | read-only | mandatory | The number of entries in dlswCircuitTable which are not in the disconnected state. |
| 1.3.6.1.4.1.43.2.24.5.1.2 | ScalardlswCircuitCreates | read-only | mandatory | The total number of entries ever added to dlswCircuitTable, or reactivated upon exiting -disconnected- state. |
| 1.3.6.1.4.1.43.2.24.5.2 | TabledlswCircuitTable | not-accessible | mandatory | This table is the circuit representation in the DLSw entity. Virtual data links are used to represent any internal end stations. There is a conceptual row asso… |
| 1.3.6.1.4.1.43.2.24.5.2.1 | RowdlswCircuitEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.2.24.5.2.1.1 | ColumndlswCircuitS1Mac | read-only | mandatory | The MAC Address of End Station 1 (S1) used for this circuit. |
| 1.3.6.1.4.1.43.2.24.5.2.1.2 | ColumndlswCircuitS1Sap | read-only | mandatory | The SAP at End Station 1 (S1) used for this circuit. |
| 1.3.6.1.4.1.43.2.24.5.2.1.3 | ColumndlswCircuitS1IfIndex | read-only | mandatory | The IfEntry index of the local interface through which S1 can be reached. |
| 1.3.6.1.4.1.43.2.24.5.2.1.4 | ColumndlswCircuitS1DlcType | read-only | mandatory | The DLC protocol in use between the DLSw node and S1. |
| 1.3.6.1.4.1.43.2.24.5.2.1.5 | ColumndlswCircuitS1RouteInfo | read-only | mandatory | If source-route bridging is in use between the DLSw node and S1, this is the routing information field describing the path between the two devices. Otherwise t… |
| 1.3.6.1.4.1.43.2.24.5.2.1.6 | ColumndlswCircuitS1CircuitId | read-only | mandatory | The Circuit ID assigned by this DLSw node to this circuit. The first four octets are the DLC port Id, and the second four octets are the Data Link Correlator. … |
| 1.3.6.1.4.1.43.2.24.5.2.1.7 | ColumndlswCircuitS1Dlc | read-only | mandatory | Points to a conceptual row of the underlying DLC MIB, which could either be the standard SDLC or LLC MIBs, or an enterprise-specific DLC MIB. |
| 1.3.6.1.4.1.43.2.24.5.2.1.8 | ColumndlswCircuitS2Mac | read-only | mandatory | The MAC Address of End Station 2 (S2) used for this circuit. |
| 1.3.6.1.4.1.43.2.24.5.2.1.9 | ColumndlswCircuitS2Sap | read-only | mandatory | The SAP at End Station 2 (S2) used for this circuit. |
| 1.3.6.1.4.1.43.2.24.5.2.1.10 | ColumndlswCircuitS2Location | read-only | mandatory | The location of End Station 2 (S2). If the location of End Station 2 is local, the interface information will be available in the conceptual row whose S1 and S… |
| 1.3.6.1.4.1.43.2.24.5.2.1.11 | ColumndlswCircuitS2TDomain | read-only | mandatory | If the location of End Station 2 is remote, this value is the transport domain of the transport protocol the circuit is running over. Otherwise, the value is 0… |
| 1.3.6.1.4.1.43.2.24.5.2.1.12 | ColumndlswCircuitS2TAddress | read-only | mandatory | If the location of End Station 2 is remote, this object contains the address of the partner DLSw, else it will be an OCTET STRING of zero length. |
| 1.3.6.1.4.1.43.2.24.5.2.1.13 | ColumndlswCircuitS2CircuitId | read-only | mandatory | The Circuit ID assigned to this circuit by the partner DLSw node. The first four octets are the DLC port Id, and the second four octets are the Data Link Corre… |
| 1.3.6.1.4.1.43.2.24.5.2.1.14 | ColumndlswCircuitOrigin | read-only | mandatory | This object specifies which of the two end stations initiated the establishment of this circuit. |
| 1.3.6.1.4.1.43.2.24.5.2.1.15 | ColumndlswCircuitEntryTime | read-only | mandatory | The value of dlswUpTime when this circuit table conceptual row was created. |
| 1.3.6.1.4.1.43.2.24.5.2.1.16 | ColumndlswCircuitStateTime | read-only | mandatory | The value of dlswUpTime when this circuit entered the current state. |
| 1.3.6.1.4.1.43.2.24.5.2.1.17 | ColumndlswCircuitState | read-write | mandatory | The current state of this circuit. The implementation may choose to keep entries for some period of time after circuit disconnect, so the network management st… |
| 1.3.6.1.4.1.43.2.24.5.2.1.18 | ColumndlswCircuitPriority | read-only | mandatory | The transmission priority of this circuit as understood by this DLSw node. This value is determined by the two DLSw nodes at circuit startup time. If this DLSw… |
| 1.3.6.1.4.1.43.2.24.5.2.1.19 | ColumndlswCircuitFCSendGrantedUnits | read-only | mandatory | The number of paced SSP messages that this DLSw is currently authorized to send on this circuit before it must stop and wait for an additional flow control ind… |
| 1.3.6.1.4.1.43.2.24.5.2.1.20 | ColumndlswCircuitFCSendCurrentWndw | read-only | mandatory | The current window size that this DLSw is using in its role as a data sender. This is the value by which this DLSw would increase the number of messages it is … |
| 1.3.6.1.4.1.43.2.24.5.2.1.21 | ColumndlswCircuitFCRecvGrantedUnits | read-only | mandatory | The current number of paced SSP messages that this DLSw has authorized the partner DLSw to send on this circuit before the partner DLSw must stop and wait for … |
| 1.3.6.1.4.1.43.2.24.5.2.1.22 | ColumndlswCircuitFCRecvCurrentWndw | read-only | mandatory | The current window size that this DLSw is using in its role as a data receiver. This is the number of additional paced SSP messages that this DLSw would be aut… |
| 1.3.6.1.4.1.43.2.24.5.2.1.23 | ColumndlswCircuitFCLargestRecvGranted | read-only | mandatory | The largest receive window size granted by this DLSw during the current activation of this circuit. This is not the largest number of messages granted at any t… |
| 1.3.6.1.4.1.43.2.24.5.2.1.24 | ColumndlswCircuitFCLargestSendGranted | read-only | mandatory | The largest send (with respect to this DLSw) window size granted by the partner DLSw during the current activation of this circuit. The value zero should be re… |
| 1.3.6.1.4.1.43.2.24.5.2.1.25 | ColumndlswCircuitFCHalveWndwSents | read-only | mandatory | The number of Halve Window operations this DLSw has sent on this circuit, in its role as a data receiver. The value zero should be returned if this circuit is … |
| 1.3.6.1.4.1.43.2.24.5.2.1.26 | ColumndlswCircuitFCResetOpSents | read-only | mandatory | The number of Reset Window operations this DLSw has sent on this circuit, in its role as a data receiver. The value zero should be returned if this circuit is … |
| 1.3.6.1.4.1.43.2.24.5.2.1.27 | ColumndlswCircuitFCHalveWndwRcvds | read-only | mandatory | The number of Halve Window operations this DLSw has received on this circuit, in its role as a data sender. The value zero should be returned if this circuit i… |
| 1.3.6.1.4.1.43.2.24.5.2.1.28 | ColumndlswCircuitFCResetOpRcvds | read-only | mandatory | The number of Reset Window operations this DLSw has received on this circuit, in its role as a data sender. The value zero should be returned if this circuit i… |
| 1.3.6.1.4.1.43.2.24.5.2.1.29 | ColumndlswCircuitDiscReasonLocal | read-only | mandatory | The reason why this circuit was last disconnected, as seen by this DLSw node. This object is present only if the implementation keeps circuit table entries aro… |
| 1.3.6.1.4.1.43.2.24.5.2.1.30 | ColumndlswCircuitDiscReasonRemote | read-only | mandatory | The generic reason code why this circuit was last disconnected, as reported by the DLSw partner in a HALT_DL or HALT_DL_NOACK. If the partner does not send a r… |
| 1.3.6.1.4.1.43.2.24.5.2.1.31 | ColumndlswCircuitDiscReasonRemoteData | read-only | mandatory | Implementation-specific data reported by the DLSw partner in a HALT_DL or HALT_DL_NOACK, to help specify how and why this circuit was last disconnected. If the… |
| 1.3.6.1.4.1.43.2.24.6 | NodedlswSdlc | |||
| 1.3.6.1.4.1.43.2.24.7 | NodedlswTraps |