adtran/ADTRAN-GEMINAX-MIB
10 objects
This is the MIB module that describes Geminax recovery option settings
Imported Objects
| ADTRAN-GENSLOT-MIB | adGenSlotInfoIndex |
| ADTRAN-SHARED-XDSL-MIB MISSING | adGenGeminax adGenGeminaxID |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.5.73.2.1 | NodeadGenGeminaxMax | |||
| 1.3.6.1.4.1.664.5.73.2.1.1 | TableadGenGeminaxDiagTable | not-accessible | current | This table contains information on the Lantiq (Infineon) GeminaxMax DSP. Each entry reflects a required parameter or action required to perform either the SELT… |
| 1.3.6.1.4.1.664.5.73.2.1.1.1 | RowadGenGeminaxDiagEntry | not-accessible | current | This table contains configuration parameters for the GeminaxMax DSP. The entries are used to configure the recovery option settings. |
| 1.3.6.1.4.1.664.5.73.2.1.1.1.1 | ColumnadGenGeminaxErrorClassECF | read-write | current | Sets the action to be taken when a Class ECF error occurs. The following settings are allowed: disabled(1) - do nothing, logOnly(2) - log the event, softReset(… |
| 1.3.6.1.4.1.664.5.73.2.1.1.1.2 | ColumnadGenGeminaxErrorClassA | read-write | current | Sets the action to be taken when a Class A error occurs. The following settings are allowed: disabled(1) - do nothing, logOnly(2) - log the event, softReset(3)… |
| 1.3.6.1.4.1.664.5.73.2.1.1.1.3 | ColumnadGenGeminaxErrorClassB | read-write | current | Sets the action to be taken when a Class B error occurs. The following settings are allowed: disabled(1) - do nothing, logOnly(2) - log the event, softReset(3)… |
| 1.3.6.1.4.1.664.5.73.2.1.1.1.4 | ColumnadGenGeminaxErrorClassC | read-write | current | Sets the action to be taken when a Class C error occurs. The following settings are allowed: disabled(1) - do nothing, logOnly(2) - log the event, softReset(3)… |
| 1.3.6.1.4.1.664.5.73.2.1.1.1.5 | ColumnadGenGeminaxErrorClassD | read-write | current | Sets the action to be taken when a Class D error occurs. The following settings are allowed: disabled(1) - do nothing, logOnly(2) - log the event, softReset(3)… |
| 1.3.6.1.4.1.664.5.73.2.1.1.1.6 | ColumnadGenGeminaxErrorClassE | read-write | current | Sets the action to be taken when a Class E error occurs. The following settings are allowed: disabled(1) - do nothing, logOnly(2) - log the event, softReset(3)… |
| 1.3.6.1.4.1.664.6.10000.73.2.1 | IdentityadGenGeminaxMIB | This is the MIB module that describes Geminax recovery option settings |