adtran/ADTRAN-GEN-SYSTEM-TIMING-MIB
62 objects
This MIB defines the objects for the Generic System Timing MIB.
Imported Objects
| ADTRAN-GENTRAPINFORM-MIB | adTrapInformSeqNum |
| ADTRAN-SHARED-CND-SYSTEM-MIB MISSING | adGenSystemTiming adGenSystemTimingID |
| ADTRAN-SHARED-CND-SYSTEM-TC-MIB MISSING | GenSystemInterfaceType |
| IF-MIB | ifIndex |
| SNMPv2-MIB | sysName |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.5.70.13.1 | NodeadGenSystemTimingProv | |||
| 1.3.6.1.4.1.664.5.70.13.1.1 | TableadGenSystemTimingProvTable | not-accessible | current | The Generic System Timing Provisioning table. |
| 1.3.6.1.4.1.664.5.70.13.1.1.1 | RowadGenSystemTimingProvEntry | not-accessible | current | An entry in Generic System Timing Table |
| 1.3.6.1.4.1.664.5.70.13.1.1.1.1 | ColumnadGenSystemTimingSource | read-only | current | Identifies the timing source for this entry: primary, secondary, or fallback. |
| 1.3.6.1.4.1.664.5.70.13.1.1.1.2 | ColumnadGenSystemTimingSelection | read-write | current | The timing source selection |
| 1.3.6.1.4.1.664.5.70.13.1.1.1.3 | ColumnadGenSystemTimingInterfaceType | read-write | current | Returns which type of interface is providing timing. Returns unknown(1) if adGenSystemTimingSelection is internal, externalPrimary or externalSecondary. |
| 1.3.6.1.4.1.664.5.70.13.1.1.1.4 | ColumnadGenSystemTimingShelf | read-write | current | The shelf number for the timing source. Returns a value of 0 when adGenSystemTimingSelection is internal, externalPrimary, or externalSecondary. |
| 1.3.6.1.4.1.664.5.70.13.1.1.1.5 | ColumnadGenSystemTimingSlot | read-write | current | The slot number for the timing source. Returns a value of 0 when adGenSystemTimingSelection is internal, externalPrimary, or externalSecondary. Access module s… |
| 1.3.6.1.4.1.664.5.70.13.1.1.1.6 | ColumnadGenSystemTimingPort | read-write | current | The port number for the timing source. Returns a value of 0 when adGenSystemTimingSelection is internal, externalPrimary, or externalSecondary. |
| 1.3.6.1.4.1.664.5.70.13.1.1.1.7 | ColumnadGenSystemTimingConfigurationStatus | read-only | current | Returns the current configuration status of timing subsystem |
| 1.3.6.1.4.1.664.5.70.13.1.2 | TableadGenSystemTimingExternalSourceProvTable | not-accessible | current | The System Timing External Source Provisioning Table. |
| 1.3.6.1.4.1.664.5.70.13.1.2.1 | RowadGenSystemTimingExternalSourceProvEntry | not-accessible | current | An entry in the System Timing External Source Provisioning Table |
| 1.3.6.1.4.1.664.5.70.13.1.2.1.1 | ColumnadGenSystemTimingExternalSourceId | read-only | current | Identifies the external timing source (primary or secondary). |
| 1.3.6.1.4.1.664.5.70.13.1.2.1.2 | ColumnadGenSystemTimingExternalSourceType | read-write | current | Select which type the External clock input should expect. If one external timing source type (primary or secondary) is set to bits-d5 from default type i.e. bi… |
| 1.3.6.1.4.1.664.5.70.13.1.2.1.3 | ColumnadGenSystemTimingExternalSourceQuality | read-write | current | Select the quality for the external clock. |
| 1.3.6.1.4.1.664.5.70.13.1.2.1.4 | ColumnadGenSystemTimingExternalSourcePriority | read-write | current | Select the priority for the external clock. Set adGenSystemTimingExternalSourcePriority to 0 to use the node number as the priority. Override this default beha… |
| 1.3.6.1.4.1.664.5.70.13.1.2.1.5 | ColumnadGenSystemTimingExternalSourceHopCount | read-write | current | Select the Hop Count for the external clock. The hop count is the number of nodes between a source and a destination. The Hop Count takes a value from 0 to 255. |
| 1.3.6.1.4.1.664.5.70.13.1.3 | ScalaradGenSystemTimingModeRevertive | read-write | deprecated | Enabling this allows the clock to fail back to the primary should the primary source's health return to normal. Disabled means the clock will remain on the sec… |
| 1.3.6.1.4.1.664.5.70.13.1.4 | ScalaradGenSystemTimingForceClockFailover | read-write | current | Writing a value to this will cause the clock source to failover, a get will always return 1 |
| 1.3.6.1.4.1.664.5.70.13.1.5 | ScalaradGenSystemTimingUseHopCount | read-write | deprecated | Enable or disable the hop count in SM timing messages. This object has been deprecated. Set adGenSystemTimingSelectionMode to useHopCount(3). |
| 1.3.6.1.4.1.664.5.70.13.1.6 | ScalaradGenSystemTimingSrcSwitchAlarmEnable | read-write | current | True - alarm is enabled |
| 1.3.6.1.4.1.664.5.70.13.1.7 | ScalaradGenSystemTimingPriSrcFailAlarmEnable | read-write | current | True - alarm is enabled |
| 1.3.6.1.4.1.664.5.70.13.1.8 | ScalaradGenSystemTimingSecSrcFailAlarmEnable | read-write | current | True - alarm is enabled |
| 1.3.6.1.4.1.664.5.70.13.1.9 | ScalaradGenSystemTimingSelectionMode | read-write | current | Specify how the current timing source will be selected. The system will failover to the secondary timing source if the primary source fails. When set to revert… |
| 1.3.6.1.4.1.664.5.70.13.1.10 | TableadGenSystemTimingProvPortTable | not-accessible | current | The Generic System Timing Port Provisioning table. |
| 1.3.6.1.4.1.664.5.70.13.1.10.1 | RowadGenSystemTimingProvPortEntry | not-accessible | current | An entry in Generic System Timing Port Provisioning Table |
| 1.3.6.1.4.1.664.5.70.13.1.10.1.1 | ColumnadGenSystemTimingTransmitSSMEnable | read-write | current | This object indicates if SSM transmission is enabled/disabled on a port. |
| 1.3.6.1.4.1.664.5.70.13.2 | NodeadGenSystemTimingStatus | |||
| 1.3.6.1.4.1.664.5.70.13.2.1 | ScalaradGenSystemTimingCurrentSource | read-only | current | Read-Only: Displays which timing source is currently in use by the system |
| 1.3.6.1.4.1.664.5.70.13.2.2 | ScalaradGenSystemTimingLoopAClockHealth | read-only | current | Displays the health of the loop A timing source |
| 1.3.6.1.4.1.664.5.70.13.2.3 | ScalaradGenSystemTimingLoopBClockHealth | read-only | current | Displays the health of the loop B timing source |
| 1.3.6.1.4.1.664.5.70.13.2.4 | ScalaradGenSystemTimingBitsAClockHealth | read-only | current | Displays the health of the bits A timing source |
| 1.3.6.1.4.1.664.5.70.13.2.5 | ScalaradGenSystemTimingBitsBClockHealth | read-only | current | Displays the health of the bits B timing source |
| 1.3.6.1.4.1.664.5.70.13.2.6 | ScalaradGenSystemTimingPrimaryClockHealth | read-only | current | Displays the health of the primary timing source |
| 1.3.6.1.4.1.664.5.70.13.2.7 | ScalaradGenSystemTimingSecondaryClockHealth | read-only | current | Displays the health of the secondary timing source |
| 1.3.6.1.4.1.664.5.70.13.2.8 | ScalaradGenSystemTimingCurrentHopCount | read-only | current | The number of hops for the current timing source. |
| 1.3.6.1.4.1.664.5.70.13.2.9 | ScalaradGenSystemTimingCurrentTimingSourcePriority | read-only | current | The priority value for the current timing source. |
| 1.3.6.1.4.1.664.5.70.13.2.10 | ScalaradGenSystemTimingCurrentTimingSourceQuality | read-only | current | The quality of the current timing source. |
| 1.3.6.1.4.1.664.5.70.13.2.11 | ScalaradGenSystemTimingPrimaryHopCount | read-only | current | The number of hops for the primary timing source. |
| 1.3.6.1.4.1.664.5.70.13.2.12 | ScalaradGenSystemTimingPrimaryTimingSourcePriority | read-only | current | The priority value for the primary timing source. |
| 1.3.6.1.4.1.664.5.70.13.2.13 | ScalaradGenSystemTimingPrimaryTimingSourceQuality | read-only | current | The quality of the primary timing source. |
| 1.3.6.1.4.1.664.5.70.13.2.14 | ScalaradGenSystemTimingSecondaryHopCount | read-only | current | The number of hops for the secondary timing source. |
| 1.3.6.1.4.1.664.5.70.13.2.15 | ScalaradGenSystemTimingSecondaryTimingSourcePriority | read-only | current | The priority value for the secondary timing source. |
| 1.3.6.1.4.1.664.5.70.13.2.16 | ScalaradGenSystemTimingSecondaryTimingSourceQuality | read-only | current | The quality of the secondary timing source. |
| 1.3.6.1.4.1.664.5.70.13.2.17 | ScalaradGenSystemTimingFallbackHopCount | read-only | current | The number of hops for the fallback timing source. |
| 1.3.6.1.4.1.664.5.70.13.2.18 | ScalaradGenSystemTimingFallbackTimingSourcePriority | read-only | current | The priority value for the fallback timing source. |
| 1.3.6.1.4.1.664.5.70.13.2.19 | ScalaradGenSystemTimingFallbackTimingSourceQuality | read-only | current | The quality of the fallback timing source. |
| 1.3.6.1.4.1.664.5.70.13.3 | NodeadGenSystemTimingAlarmPrefix | |||
| 1.3.6.1.4.1.664.5.70.13.3.0 | NodeadGenSystemTimingAlarms | |||
| 1.3.6.1.4.1.664.5.70.13.3.0.1 | NotificationadGenSystemTimingSrcSwitch | current | Indicates that the system timing source has occured a protection switch. | |
| 1.3.6.1.4.1.664.5.70.13.3.0.2 | NotificationadGenSystemTimingPriSrcClear | current | Indicates that the primary timing source alarm has cleared | |
| 1.3.6.1.4.1.664.5.70.13.3.0.3 | NotificationadGenSystemTimingPriSrcFail | current | Indicates that the primary timing source has failed | |
| 1.3.6.1.4.1.664.5.70.13.3.0.4 | NotificationadGenSystemTimingSecSrcClear | current | Indicates that the secondary timing source alarm has cleared | |
| 1.3.6.1.4.1.664.5.70.13.3.0.5 | NotificationadGenSystemTimingSecSrcFail | current | Indicates that the secondary timing source has failed | |
| 1.3.6.1.4.1.664.6.10000.70.13.1 | IdentityadGenSystemTimingMIB | This MIB defines the objects for the Generic System Timing MIB. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AdGenExternalSource | INTEGER { externalPrimary(1), externalSecondary(2) } | current | Enumerates the available external timing sources in the system. |
| AdGenExternalSourceType | INTEGER { bitsD4 (1), bitsOD (2), composite (3), composite8kHz (4), bitsG704 (5), bitsD5 (6) } | current | Specifies the type of external timing source. |
| AdGenSystemTimingSourceHealth | INTEGER { up(1), down(2) } | current | Specifies the health of a timing source. |
| AdGenTimingConfigurationStatus | INTEGER { invalidConfiguration (1), incompleteConfiguration (2), okConfiguration (3) } | current | Specifies the current state of timing configuration in the system. |
| AdGenTimingSource | INTEGER { primaryTimingSource (1), secondaryTimingSource (2), fallbackTimingSource (3) } | current | Enumerates the timing sources that may be provisioned for the system. |
| AdGenTimingSourceQuality | INTEGER { stratum1 (1), synchronized (2), stratum2 (3), transmitModeClock (4), stratum3e (5), stratum3 (6), sonetClock (7), stratum4or4e (8), doNotUseForSync (15) } | current | Specifies the quality of the external timing source. |
| AdGenTimingSourceSelection | INTEGER { internal (1), externalPrimary (2), externalSecondary (3), loopA (4), loopB (5), localPort (6), fixedPort (7), localPortSyncE (8), fixedPortSyncE (9), localPortPhy (10), fixedPortPhy (11), vdslUplinkNTR (12) } | current | Specifies the available timing source selections in the system. |