adtran/ADTRAN-GENPOLICER-MIB
66 objects
This MIB defines the objects for the Policer MIB.
Imported Objects
| ADTRAN-GENSLOT-MIB | adGenSlotInfoIndex |
| ADTRAN-GENTRAPINFORM-MIB | adTrapInformSeqNum |
| ADTRAN-SHARED-CND-SYSTEM-MIB MISSING | adGenPolicer adGenPolicerID |
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| SNMPv2-MIB | sysName |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.5.70.35.0 | NodeadGenPolicerEvents | |||
| 1.3.6.1.4.1.664.5.70.35.1 | NodeadGenPolicerProvisioning | |||
| 1.3.6.1.4.1.664.5.70.35.1.1 | TableadGenPolicerTable | not-accessible | current | The Policer provisioning table. |
| 1.3.6.1.4.1.664.5.70.35.1.1.1 | RowadGenPolicerEntry | not-accessible | current | An entry in the Policer provisioning table. Policer entries are uniquely identified by Slot as well as by the Policer Name. |
| 1.3.6.1.4.1.664.5.70.35.1.1.1.1 | ColumnadGenPolicerName | not-accessible | current | A user configurable name for the Policer. Upon creation of the Policer, the associated name will default to a unique value. |
| 1.3.6.1.4.1.664.5.70.35.1.1.1.2 | ColumnadGenPolicerRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in the Policer table. |
| 1.3.6.1.4.1.664.5.70.35.1.1.1.3 | ColumnadGenPolicerStatus | read-only | current | This variable provides the Policer status. If there is no error, the Policer status will be 'running'. If there is an error and the Policer cannot be applied, … |
| 1.3.6.1.4.1.664.5.70.35.1.1.1.4 | ColumnadGenPolicerOperStatus | read-only | current | This variable provides the current operational status of the Policer. |
| 1.3.6.1.4.1.664.5.70.35.1.1.1.5 | ColumnadGenPolicerCIR | read-create | current | This variable is used to configure the Committed Information Rate (CIR) for the policer. The CIR is the rate in kbps up to which service frames are delivered a… |
| 1.3.6.1.4.1.664.5.70.35.1.1.1.6 | ColumnadGenPolicerCBS | read-create | current | This variable is used to configure the Committed Burst Size (CBS) for the policer. The CBS is the maximum available bytes for a burst of ingress traffic sent a… |
| 1.3.6.1.4.1.664.5.70.35.1.1.1.7 | ColumnadGenPolicerEIR | read-create | current | This variable is used to configure the Excess Information Rate (EIR) for the policer. The EIR is the rate in kbps up to which service frames are delivered with… |
| 1.3.6.1.4.1.664.5.70.35.1.1.1.8 | ColumnadGenPolicerEIRNoLimit | read-create | current | A boolean indicating whether you want to configure EIR for no limit (max-bandwidth). If you configure value of EIR using adGenPolicerEIR, this should be set to… |
| 1.3.6.1.4.1.664.5.70.35.1.1.1.9 | ColumnadGenPolicerEBS | read-create | current | This variable is used to configure the Excess Burst Size (EBS) for the policer. TThe EBS is the maximum available bytes for a burst of ingress traffic sent at … |
| 1.3.6.1.4.1.664.5.70.35.1.1.1.10 | ColumnadGenPolicerMode | read-create | current | This variable provisions the type of the policer. * Use the unspecified option to remove currently selected per mode option. Also this is a default value when … |
| 1.3.6.1.4.1.664.5.70.35.1.1.1.11 | ColumnadGenPolicerUNIPort | read-create | current | This variable is used if adGenPolicerMode is set to perUNI option. It specifies the interface index to apply the policer to a particular UNI. |
| 1.3.6.1.4.1.664.5.70.35.1.1.1.12 | ColumnadGenPolicerEVCName | read-create | current | This variable is used if adGenPolicerMode is set to perEVC option. It specifies the name of the EVC to apply the policer to a particular EVC. |
| 1.3.6.1.4.1.664.5.70.35.1.1.1.13 | ColumnadGenPolicerMEVCName | read-create | current | This variable is used if adGenPolicerMode is set to perMEVC option. It specifies the name of the MEVC to apply the policer to a particular MEVC. |
| 1.3.6.1.4.1.664.5.70.35.1.1.1.14 | ColumnadGenPolicerCEVlanPriority | read-create | current | This variable is used if adGenPolicerMode is set to perMEVC option and the policer is to be applied to a particular range of CE VLAN priority traffic within an… |
| 1.3.6.1.4.1.664.5.70.35.1.1.1.15 | ColumnadGenPolicerAddEvcMap | read-create | current | This variable is used if adGenPolicerMode is set to perEVCMap option. It is used to add a map to the policer. It specifies the EVC Map to apply the policer to … |
| 1.3.6.1.4.1.664.5.70.35.1.1.1.16 | ColumnadGenPolicerRemoveEvcMap | read-create | current | This variable is used if adGenPolicerMode is set to perEVCMap option. It is used to remove an EVC Map from the policer. Use adGenPolicerEVCMapLookupTable to li… |
| 1.3.6.1.4.1.664.5.70.35.1.1.1.17 | ColumnadGenPolicerLastError | read-only | current | This string describes the last error experienced for this particular entry in the table. |
| 1.3.6.1.4.1.664.5.70.35.1.2 | NodeadGenPolicerThresholds | |||
| 1.3.6.1.4.1.664.5.70.35.1.2.1 | TableadGenPolicer15MinThresholdTable | not-accessible | current | The Policer 15 minute threshold table. |
| 1.3.6.1.4.1.664.5.70.35.1.2.1.1 | RowadGenPolicer15MinThresholdEntry | not-accessible | current | An entry in the Policer 15 minute threshold table. Each entry is uniquely identified by Slot as well as by the Policer Name. |
| 1.3.6.1.4.1.664.5.70.35.1.2.1.1.1 | ColumnadGenPolicer15MinThresholdDiscardsGreenFrames | read-write | current | The 15 minute performance monitoring threshold associated with the number of green frames dropped due to congestion. |
| 1.3.6.1.4.1.664.5.70.35.1.2.1.1.2 | ColumnadGenPolicer15MinThresholdTotalGreenFrames | read-write | current | The 15 minute performance monitoring threshold associated with the number of all ingress frames colored green. |
| 1.3.6.1.4.1.664.5.70.35.1.2.1.1.3 | ColumnadGenPolicer15MinThresholdDiscardsYellowFrames | read-write | current | The 15 minute performance monitoring threshold associated with the number of yellow frames dropped due to congestion. |
| 1.3.6.1.4.1.664.5.70.35.1.2.1.1.4 | ColumnadGenPolicer15MinThresholdTotalYellowFrames | read-write | current | The 15 minute performance monitoring threshold associated with the number of all ingress frames colored yellow. |
| 1.3.6.1.4.1.664.5.70.35.1.2.1.1.5 | ColumnadGenPolicer15MinThresholdTotalRedFrames | read-write | current | The 15 minute performance monitoring threshold associated with the number of all ingress frames colored red. |
| 1.3.6.1.4.1.664.5.70.35.1.2.2 | TableadGenPolicer24HrThresholdTable | not-accessible | current | The Policer 24 hour threshold table. |
| 1.3.6.1.4.1.664.5.70.35.1.2.2.1 | RowadGenPolicer24HrThresholdEntry | not-accessible | current | An entry in the Policer 24 hour threshold table. Each entry is uniquely identified by Slot as well as by the Policer Name. |
| 1.3.6.1.4.1.664.5.70.35.1.2.2.1.1 | ColumnadGenPolicer24HrThresholdDiscardsGreenFrames | read-write | current | The 24 hour performance monitoring threshold associated with the number of green frames dropped due to congestion. |
| 1.3.6.1.4.1.664.5.70.35.1.2.2.1.2 | ColumnadGenPolicer24HrThresholdTotalGreenFrames | read-write | current | The 24 hour performance monitoring threshold associated with the number of all ingress frames colored green. |
| 1.3.6.1.4.1.664.5.70.35.1.2.2.1.3 | ColumnadGenPolicer24HrThresholdDiscardsYellowFrames | read-write | current | The 24 hour performance monitoring threshold associated with the number of yellow frames dropped due to congestion. |
| 1.3.6.1.4.1.664.5.70.35.1.2.2.1.4 | ColumnadGenPolicer24HrThresholdTotalYellowFrames | read-write | current | The 24 hour performance monitoring threshold associated with the number of all ingress frames colored yellow. |
| 1.3.6.1.4.1.664.5.70.35.1.2.2.1.5 | ColumnadGenPolicer24HrThresholdTotalRedFrames | read-write | current | The 24 hour performance monitoring threshold associated with the number of all ingress frames colored red. |
| 1.3.6.1.4.1.664.5.70.35.1.3 | TableadGenPolicerErrorTable | not-accessible | current | The Policer Creation Error table. |
| 1.3.6.1.4.1.664.5.70.35.1.3.1 | RowadGenPolicerErrorEntry | not-accessible | current | An entry in the Policer Creation Error table. The index, adGenSlotInfoIndex, identifies the SLOT. |
| 1.3.6.1.4.1.664.5.70.35.1.3.1.1 | ColumnadGenPolicerError | read-only | current | Returns information about the last error for the Policer create on SLOT. If row creation fails, this string will provide details about why the row could not be… |
| 1.3.6.1.4.1.664.5.70.35.1.4 | TableadGenPolicerLookupTable | not-accessible | current | The table to display Policer information associated with the Slot. |
| 1.3.6.1.4.1.664.5.70.35.1.4.1 | RowadGenPolicerLookupEntry | not-accessible | current | An entry in the policer information table. Each entry in the table is uniquely indentified by Slot as well as by the Policer name. |
| 1.3.6.1.4.1.664.5.70.35.1.4.1.1 | ColumnadGenPolicerActualCIR | read-only | current | This variable displays the actual Committed Information Rate (CIR) for the policer. The CIR is the rate in kbps up to which service frames are delivered accord… |
| 1.3.6.1.4.1.664.5.70.35.1.4.1.2 | ColumnadGenPolicerActualCBS | read-only | current | This variable displays the actual Committed Burst Size (CBS) for the policer. The CBS is the maximum available bytes for a burst of ingress traffic sent at the… |
| 1.3.6.1.4.1.664.5.70.35.1.4.1.3 | ColumnadGenPolicerActualEIR | read-only | current | This variable displays the actual Excess Information Rate (EIR) for the policer. The EIR is the rate in kbps up to which service frames are delivered without a… |
| 1.3.6.1.4.1.664.5.70.35.1.4.1.4 | ColumnadGenPolicerActualEBS | read-only | current | This variable displays the actual Excess Burst Size (EBS) for the policer. The EBS is the maximum available bytes for a burst of ingress traffic sent at the UN… |
| 1.3.6.1.4.1.664.5.70.35.1.4.1.5 | ColumnadGenPolicerProvNumberOfEVCMaps | read-only | current | This variable displays the count of Provisioned EVC maps that are connected to the policer. |
| 1.3.6.1.4.1.664.5.70.35.1.4.1.6 | ColumnadGenPolicerQualifiedNumberOfEVCMaps | read-only | current | This variable displays the count of Qualified EVC maps that are connected to the policer. The qualified Evc Maps are the Maps associated to MEVC,EVC, EVC Map, … |
| 1.3.6.1.4.1.664.5.70.35.1.5 | TableadGenPolicerEVCMapLookupTable | not-accessible | current | The lookup table to display Provisioned EVC Maps names associated with a policer. |
| 1.3.6.1.4.1.664.5.70.35.1.5.1 | RowadGenPolicerEVCMapLookupEntry | not-accessible | current | An entry in the policer EVC Map lookup table. The first index, adGenSlotInfoIndex, identifies the SLOT. The second index, adGenPolicerFixedLengthName, identifi… |
| 1.3.6.1.4.1.664.5.70.35.1.5.1.1 | ColumnadGenPolicerFixedLengthName | not-accessible | current | A user configured name for the Policer. This string matches adGenPolicerName from adGenPolicerTable, but it is padded at the end with 0x00 so that the table in… |
| 1.3.6.1.4.1.664.5.70.35.1.5.1.2 | ColumnadGenPolicerEVCMapLookupIndex | not-accessible | current | This variable is used as an index into the EVC maps associated with the policer. |
| 1.3.6.1.4.1.664.5.70.35.1.5.1.3 | ColumnadGenPolicerEVCMapLookupName | read-only | current | This variable list the EVC map name that is associated with the policer. |
| 1.3.6.1.4.1.664.5.70.35.1.6 | TableadGenPolicerQualifiedEVCMapLookupTable | not-accessible | current | The lookup table to display Qualified EVC Maps names associated with a policer. The qualified Evc Maps are the Maps associated to MEVC,EVC, EVC Map, UNI or Int… |
| 1.3.6.1.4.1.664.5.70.35.1.6.1 | RowadGenPolicerQualifiedEVCMapLookupEntry | not-accessible | current | An entry in the policer Qualified EVC Map lookup table. The first index, adGenSlotInfoIndex, identifies the SLOT. The second index, adGenPolicerFixedLengthName… |
| 1.3.6.1.4.1.664.5.70.35.1.6.1.1 | ColumnadGenPolicerQualifiedEVCMapLookupIndex | not-accessible | current | This variable is used as an index into the Qualified EVC maps associated with the policer. |
| 1.3.6.1.4.1.664.5.70.35.1.6.1.2 | ColumnadGenPolicerQualifiedEVCMapLookupName | read-only | current | This variable list the Qualified EVC map name that is associated with the policer. |
| 1.3.6.1.4.1.664.5.70.35.1.6.1.3 | ColumnadGenPolicerQualifiedEVCMapLookupStatus | read-only | current | This variable list the Qualified Evc Map Policed Status that is associated with the policer. * Evc Map policed Status of disabled indicates that the associated… |
| 1.3.6.1.4.1.664.5.70.35.100 | NodeadGenPolicerAlarm | |||
| 1.3.6.1.4.1.664.5.70.35.100.0 | NodeadGenPolicerAlarmEvents | |||
| 1.3.6.1.4.1.664.5.70.35.100.0.1 | NotificationadGenPolicer15MinThresGreenTotalAlarm | current | This trap indicates that the Policer total green frames has crossed the 15 min green frames total Threshold | |
| 1.3.6.1.4.1.664.5.70.35.100.0.3 | NotificationadGenPolicer15MinThresYellowTotalAlarm | current | This trap indicates that the Policer total yellow frames has crossed the 15 min yellow total Threshold | |
| 1.3.6.1.4.1.664.5.70.35.100.0.5 | NotificationadGenPolicer15MinThresRedTotalAlarm | current | This trap indicates that the Policer total red frames has crossed the 15 min red total Threshold | |
| 1.3.6.1.4.1.664.5.70.35.100.0.7 | NotificationadGenPolicer24HrThresGreenTotalAlarm | current | This trap indicates that the Policer total green frames has crossed the 24 hour green total Threshold | |
| 1.3.6.1.4.1.664.5.70.35.100.0.9 | NotificationadGenPolicer24HrThresYellowTotalAlarm | current | This trap indicates that the Policer total yellow frames has crossed the 24 hour yellow total Threshold | |
| 1.3.6.1.4.1.664.5.70.35.100.0.11 | NotificationadGenPolicer24HrThresRedTotalAlarm | current | This trap indicates that the Policer total red frames has crossed the 24 hour red total Threshold | |
| 1.3.6.1.4.1.664.6.10000.70.35.1 | IdentityadGenPolicerMIB | This MIB defines the objects for the Policer MIB. |