adtran/ADTRAN-GENSHAPER-MIB
19 objects
This MIB defines the objects for the Shaper MIB.
Imported Objects
| ADTRAN-GENSLOT-MIB | adGenSlotInfoIndex |
| ADTRAN-SHARED-CND-SYSTEM-MIB MISSING | adGenShaper adGenShaperID |
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.5.70.19.1 | NodeadGenShaperProvisioning | |||
| 1.3.6.1.4.1.664.5.70.19.1.1 | TableadGenShaperProvTable | not-accessible | current | The Shaper provisioning table. |
| 1.3.6.1.4.1.664.5.70.19.1.1.1 | RowadGenShaperProvEntry | not-accessible | current | An entry in the Shaper provisioning table. Shaper entries are uniquely identified by their name and slot. |
| 1.3.6.1.4.1.664.5.70.19.1.1.1.1 | ColumnadGenShaperProvName | not-accessible | current | A user configurable name for the Shaper. Upon creation of the Shaper, the associated name will default to a unique value. |
| 1.3.6.1.4.1.664.5.70.19.1.1.1.2 | ColumnadGenShaperProvRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in the Shaper table. |
| 1.3.6.1.4.1.664.5.70.19.1.1.1.3 | ColumnadGenShaperProvOperStatus | read-only | current | Returns the current operational status of the Shaper. |
| 1.3.6.1.4.1.664.5.70.19.1.1.1.4 | ColumnadGenShaperProvOperStatusDetail | read-only | current | This variable provides the Shaper status. If there is no error, the Shaper status will be 'running'. If there is an error and the Shaper cannot be applied, the… |
| 1.3.6.1.4.1.664.5.70.19.1.1.1.5 | ColumnadGenShaperProvLastProvError | read-only | current | This string describes the last error experienced for this particular entry in the table. |
| 1.3.6.1.4.1.664.5.70.19.1.1.1.6 | ColumnadGenShaperProvApplication | read-create | current | This variable specifies where the shaper is applied. This value will determine which combination of objects will be used to identify where the shaper is applie… |
| 1.3.6.1.4.1.664.5.70.19.1.1.1.7 | ColumnadGenShaperProvRate | read-create | current | This variable specifies the shaper rate in kbps. The range supported is determined by the interface the shaper is connected to. The minimum shaper rate is 1kbp… |
| 1.3.6.1.4.1.664.5.70.19.1.1.1.8 | ColumnadGenShaperProvInterface | read-create | current | Specifies the Layer 2 Ethernet interface the shaper is applied to. A value of zero means this interface has not been set. |
| 1.3.6.1.4.1.664.5.70.19.1.1.1.9 | ColumnadGenShaperBurstSize | read-create | current | This variable configures the Burst Size in bytes for the shaper. The burst size specifies the number of consecutive bytes allowed to egress at the interface ra… |
| 1.3.6.1.4.1.664.5.70.19.1.2 | TableadGenShaperSlotTable | not-accessible | current | The Shaper provisioning table. |
| 1.3.6.1.4.1.664.5.70.19.1.2.1 | RowadGenShaperSlotEntry | not-accessible | current | An entry in the Shaper slot table. These items are applicable to the device and not to an individual shaper. |
| 1.3.6.1.4.1.664.5.70.19.1.2.1.1 | ColumnadGenShaperSlotLastCreateError | read-only | current | If creation of a shaper fails. This string will be used to return the reason for failure. |
| 1.3.6.1.4.1.664.5.70.19.1.3 | TableadGenShaperLookupPerInterfaceTable | not-accessible | current | The Shaper lookup per interface table. |
| 1.3.6.1.4.1.664.5.70.19.1.3.1 | RowadGenShaperLookupPerInterfaceEntry | not-accessible | current | An entry in the Shaper lookup per interface table. This table will only contain entries for those interface that are connected to a shaper that is applied perI… |
| 1.3.6.1.4.1.664.5.70.19.1.3.1.1 | ColumnadGenShaperLookupPerInterface | read-only | current | If the selected interface is connected to a shaper that is applied perInterface(2), this object will contain the name of the shaper. |
| 1.3.6.1.4.1.664.6.10000.70.19.1 | IdentityadGenShaperMIB | This MIB defines the objects for the Shaper MIB. |