adtran/ADTRAN-GENVDSL2-LINE-MIB
654 objects
This MIB defines the objects for the VDSL2 MIB.
Imported Objects
| ADTRAN-GENPORT-MIB | adGenPortTrapIdentifier |
| ADTRAN-GENSLOT-MIB | adGenSlotInfoIndex |
| ADTRAN-GENTRAPINFORM-MIB | adTrapInformSeqNum |
| ADTRAN-SHARED-VDSL2-MIB MISSING | -- adProducts -- adtran adGenVdsl2 adGenVdsl2ID |
| IF-MIB | ifIndex |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-MIB | sysName |
| SNMPv2-SMI | Counter32 enterprises Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664 | Nodeadtran | |||
| 1.3.6.1.4.1.664.1 | NodeadProducts | |||
| 1.3.6.1.4.1.664.1.891 | NodeadTA5k24pVDSL2Combo | |||
| 1.3.6.1.4.1.664.1.892 | NodeadTA5k32pVDSL2 | |||
| 1.3.6.1.4.1.664.1.893 | NodeadTA5k32pVDSL2Spltr | |||
| 1.3.6.1.4.1.664.5.65.1.1 | NodeadGenVdsl2Prov | |||
| 1.3.6.1.4.1.664.5.65.1.1.1 | TableadGenVdsl2LineConfProfileTable | not-accessible | current | This table contains information on the VDSL2 line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1 | RowadGenVdsl2LineConfProfileEntry | not-accessible | current | Each entry consists of a list of parameters that represents the configuration of an VDSL2 modem. `Static' profiles - profiles are automaticly created or destro… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.1 | ColumnadGenVdsl2LineConfProfileName | not-accessible | current | This object is used by the line configuration table in order to identify a row of this table. This value cannot be user-specified and is not dynamic. There is … |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.2 | ColumnadGenVdsl2ConfDsRateMode | read-create | current | Defines what form of downstream rate adaptation is configured on this modem. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.3 | ColumnadGenVdsl2ConfDsTargetSnrMgn | read-create | current | Configured Target Signal/Noise Margin. This is the noise margin the modem must achieve with the target BER (10-7) or better to successfully complete initializa… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.4 | ColumnadGenVdsl2ConfDsMaxSnrMgn | read-create | current | Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operat… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.5 | ColumnadGenVdsl2ConfDsMinSnrMgn | read-create | current | Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that i… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.6 | ColumnadGenVdsl2ConfUsTargetSnrMgn | read-create | current | Configured Target Signal/Noise Margin. This is the noise margin the modem must achieve with the target BER (10-7) or better to successfully complete initializa… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.7 | ColumnadGenVdsl2ConfUsMaxSnrMgn | read-create | current | Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operat… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.8 | ColumnadGenVdsl2ConfUsMinSnrMgn | read-create | current | Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that i… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.9 | ColumnadGenVdsl2LineConfProfileRowStatus | read-only | current | This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.10 | ColumnadGenVdsl2ConfServiceMode | read-create | current | The configuration parameter sets the modem service mode. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.11 | ColumnadGenVdsl2ConfMultiModeDmtTse | read-create | current | Multimode DMT Transmission System Enabling (XTSE). A list of the different modulation types enabled in this profile for multimode. It is coded in a bit-map rep… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.12 | ColumnadGenVdsl2ConfBandProfiles | read-create | current | Bit-map of ITU-T G.993.2 implementation profiles supported by an VTU-x and can be provisioned on the VDSL2 line. Bit Assignments: Bit 00: Profile 8A Bit 01: Pr… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.13 | ColumnadGenVdsl2ConfSpecificPsdSelect | read-create | current | The VDSL2 specific PSD selections to be used in the upstream and downstream directions. The validity of these selections is dependent of the VDSL2 band profile… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.14 | ColumnadGenVdsl2ConfUsPsdMaskU0Select | read-create | current | Enable or disable of the use of the VDSL2 U0 band in the upstream direction. U0 is a relatively small frequency band of operation used by ADSL2+/ADSL2/ADSL mod… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.15 | ColumnadGenVdsl2ConfUsTrellis | read-create | current | Enable or disable Upstream Trellis Encoding. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.16 | ColumnadGenVdsl2ConfDsTrellis | read-create | current | Enable or disable Downstream Trellis Encoding. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.17 | ColumnadGenVdsl2ConfUsPboSetting | read-create | current | Defines the Upstream Power Backoff mode setting. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.18 | ColumnadGenVdsl2ConfDsPboSetting | read-create | current | Defines the Downstream Power Backoff mode setting. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.19 | ColumnadGenVdsl2ConfUsVnoiseSetting | read-create | current | Defines upstream virtual noise setting. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.20 | ColumnadGenVdsl2ConfDsVnoiseSetting | read-create | current | Defines downstream virtual noise setting. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.21 | ColumnadGenVdsl2ConfUsBitSwap | read-create | current | Defines upstream Bit Swap to be enabled or not. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.22 | ColumnadGenVdsl2ConfDsBitSwap | read-create | current | Defines downstream Bit Swap to be enabled or not. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.23 | ColumnadGenVdsl2ConfHamBandNotches | read-create | current | A bit-map of transmit power spectral density mask code, used to avoid interference with HAM (Handheld Amateur Radio) radio bands by introducing power control (… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.24 | ColumnadGenVdsl2ConfUsNomAggTxPwr | read-create | current | The maximum nominal aggregate transmit power in the upstream direction during initialization and Showtime. It ranges from 0 to 255 units of 0.1 dBm (physical v… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.25 | ColumnadGenVdsl2ConfDsNomAggTxPwr | read-create | current | The maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime. It ranges from 0 to 255 units of 0.1 dBm (physical… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.26 | ColumnadGenVdsl2ConfUsMaxNomTxPsd | read-create | current | This parameter represents the maximum nominal transmit PSD in the upstream direction during initialization and showtime (in dBm/Hz). It ranges from -60 to -30 … |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.27 | ColumnadGenVdsl2ConfDsMaxNomTxPsd | read-create | current | This parameter represents the maximum nominal transmit PSD in the downstream direction during initialization and showtime (in dBm/Hz). It ranges from -60 to -3… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.28 | ColumnadGenVdsl2ConfUsMaxAggRxPwr | read-create | current | The maximum upstream aggregate receive power over the relevant set of sub-carriers. The xTU-C should verify that the upstream power cutback is such that this m… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.29 | ColumnadGenVdsl2ConfFramingMode | read-create | current | This is the PMS-TC layer Framing mode setting. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.30 | ColumnadGenVdsl2ConfUsLp0MaxPayloadRate | read-create | current | Latency Path 0 upstream maximum payload data rate. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.31 | ColumnadGenVdsl2ConfUsLp0MinPayloadRate | read-create | current | Latency Path 0 upstream minimum payload data rate. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.32 | ColumnadGenVdsl2ConfUsLp0MaxDelay | read-create | current | Latency Path 0 upstream maximum Interleave Delay. This parameter is the maximum one-way interleaving delay in milli-seconds introduced by the PMS-TC between th… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.33 | ColumnadGenVdsl2ConfUsLp0MinProtection | read-create | current | Latency Path 0 upstream Minimum Impulse Noise Protection. This parameter specifies the minimum impulse noise protection for the latency path in 0.5 fractions o… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.34 | ColumnadGenVdsl2ConfUsLp0RaRatio | read-create | current | This parameter (expressed in %) specifies the ratio that should be taken into account for the latency path when performing rate adaptation in the direction of … |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.35 | ColumnadGenVdsl2ConfUsLp0InitPolicy | read-create | current | Selects the US latency path 0 channel framing parameter policy during initialization. The options are to maximize net data rate (ndr) or impulse noise protecti… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.36 | ColumnadGenVdsl2ConfDsLp0MaxPayloadRate | read-create | current | Latency Path 0 downstream maximum payload data rate. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.37 | ColumnadGenVdsl2ConfDsLp0MinPayloadRate | read-create | current | Latency Path 0 downstream minimum payload data rate. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.38 | ColumnadGenVdsl2ConfDsLp0MaxDelay | read-create | current | Latency Path 0 downstream maximum Interleave Delay. This parameter is the maximum one-way interleaving delay in milli-seconds introduced by the PMS-TC between … |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.39 | ColumnadGenVdsl2ConfDsLp0MinProtection | read-create | current | Latency Path 0 downstream Minimum Impulse Noise Protection. This parameter specifies the minimum impulse noise protection for the latency path in 0.5 fractions… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.40 | ColumnadGenVdsl2ConfDsLp0RaRatio | read-create | current | This parameter (expressed in %) specifies the ratio that should be taken into account for the latency path when performing rate adaptation in the direction of … |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.41 | ColumnadGenVdsl2ConfDsLp0InitPolicy | read-create | current | Selects the DS latency path 0 channel framing parameter policy during initialization. The options are to maximize net data rate (ndr) or impulse noise protecti… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.42 | ColumnadGenVdsl2ConfUsLp1MaxPayloadRate | read-create | current | Latency Path 1 upstream maximum payload data rate. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.43 | ColumnadGenVdsl2ConfUsLp1MinPayloadRate | read-create | current | Latency Path 1 upstream minimum payload data rate. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.44 | ColumnadGenVdsl2ConfUsLp1MaxDelay | read-create | current | Latency Path 1 upstream maximum Interleave Delay. This parameter is the maximum one-way interleaving delay in milli-seconds introduced by the PMS-TC between th… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.45 | ColumnadGenVdsl2ConfUsLp1MinProtection | read-create | current | Latency Path 1 upstream Minimum Impulse Noise Protection. This parameter specifies the minimum impulse noise protection for the latency path in 0.5 fractions o… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.46 | ColumnadGenVdsl2ConfUsLp1RaRatio | read-create | current | This parameter (expressed in %) specifies the ratio that should be taken into account for the latency path when performing rate adaptation in the direction of … |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.47 | ColumnadGenVdsl2ConfUsLp1InitPolicy | read-create | current | Selects the US latency path 1 channel framing parameter policy during initialization. The options are to maximize net data rate (ndr) or impulse noise protecti… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.48 | ColumnadGenVdsl2ConfDsLp1MaxPayloadRate | read-create | current | Latency Path 1 downstream maximum payload data rate. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.49 | ColumnadGenVdsl2ConfDsLp1MinPayloadRate | read-create | current | Latency Path 1 downstream minimum payload data rate. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.50 | ColumnadGenVdsl2ConfDsLp1MaxDelay | read-create | current | Latency Path 1 downstream maximum Interleave Delay. This parameter is the maximum one-way interleaving delay in milli-seconds introduced by the PMS-TC between … |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.51 | ColumnadGenVdsl2ConfDsLp1MinProtection | read-create | current | Latency Path 1 downstream Minimum Impulse Noise Protection. This parameter specifies the minimum impulse noise protection for the latency path in 0.5 fractions… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.52 | ColumnadGenVdsl2ConfDsLp1RaRatio | read-create | current | This parameter (expressed in %) specifies the ratio that should be taken into account for the latency path when performing rate adaptation in the direction of … |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.53 | ColumnadGenVdsl2ConfDsLp1InitPolicy | read-create | current | Selects the DS latency path 1 channel framing parameter policy during initialization. The options are to maximize net data rate (ndr) or impulse noise protecti… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.54 | ColumnadGenVdsl2ConfUsLp0Type | read-create | current | Selects the US latency path 0 channel type options. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.55 | ColumnadGenVdsl2ConfDsLp0Type | read-create | current | Selects the DS latency path 0 channel type options. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.56 | ColumnadGenVdsl2ConfUsLp1Type | read-create | current | Selects the US latency path 1 channel type options. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.57 | ColumnadGenVdsl2ConfDsLp1Type | read-create | current | Selects the DS latency path 1 channel type options. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.58 | ColumnadGenVdsl2ConfUsRateMode | read-create | current | Defines what form of upstream rate adaptation is configured on this modem. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.59 | ColumnadGenVdsl2ConfUsCustomPboElecLenKL | read-create | current | Upstream power back-off electrical length (KL0). |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.60 | ColumnadGenVdsl2ConfUsCustomPboForceLen | read-create | current | Upstream power back-off force electrical length. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.61 | ColumnadGenVdsl2ConfUsCustomPboBoostMode | read-create | current | Upstream power back-off boost mode. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.62 | ColumnadGenVdsl2ConfDsCustomPboElecLen | read-create | current | Downstream G997.1 Exchange side electrical length. only multiples of .5 are valid |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.63 | ColumnadGenVdsl2ConfDsCustomPboCableA | read-create | current | Downstream G997.1 Exchange side cable parameter A. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.64 | ColumnadGenVdsl2ConfDsCustomPboCableB | read-create | current | Downstream G997.1 Exchange side cable parameter B. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.65 | ColumnadGenVdsl2ConfDsCustomPboCableC | read-create | current | Downstream G997.1 Exchange side cable parameter C. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.66 | ColumnadGenVdsl2ConfDsCustomPboMinSignal | read-create | current | Downstream G997.1 Minimum Usable Signal. only multiples of .5 are valid |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.67 | ColumnadGenVdsl2ConfDsCustomPboMinFreq | read-create | current | Downstream G997.1 Minimum Power Backoff Frequency |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.68 | ColumnadGenVdsl2ConfDsCustomPboMaxFreq | read-create | current | Downstream G997.1 Maximum Power Backoff Frequency |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.69 | ColumnadGenVdsl2ConfAnfpCalValue | read-create | current | ANFP loss calibration value |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.70 | ColumnadGenVdsl2ConfDsDownshiftSnrMgn | read-create | current | Threshold SNR margin to trigger a downstream downshift. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.71 | ColumnadGenVdsl2ConfDsUpshiftSnrMgn | read-create | current | Threshold SNR margin to trigger a downstream upshift. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.72 | ColumnadGenVdsl2ConfDsMinUpshiftTime | read-create | current | Minimum configured time that must elapse between downstream upshifts. A value of 2 indicates a downshift cannot occur unless 2 seconds have elapsed since the p… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.73 | ColumnadGenVdsl2ConfDsMinDownshiftTime | read-create | current | Minimum configured time that must elapse between downstream downshifts. A value of 2 indicates a downshift cannot occur unless 2 seconds have elapsed since the… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.74 | ColumnadGenVdsl2ConfUsDownshiftSnrMgn | read-create | current | Threshold SNR margin to trigger a upstream downshift. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.75 | ColumnadGenVdsl2ConfUsUpshiftSnrMgn | read-create | current | Threshold SNR margin to trigger a upstream upshift. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.76 | ColumnadGenVdsl2ConfUsMinUpshiftTime | read-create | current | Minimum configured time that must elapse between upstream upshifts. A value of 2 indicates a downshift cannot occur unless 2 seconds have elapsed since the pre… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.77 | ColumnadGenVdsl2ConfUsMinDownshiftTime | read-create | current | Minimum configured time that must elapse between upstream downshifts. A value of 2 indicates a downshift cannot occur unless 2 seconds have elapsed since the p… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.78 | ColumnadGenVdsl2ConfUsLp0RtxSetting | read-create | current | Retransmission setting |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.79 | ColumnadGenVdsl2ConfUsLp0CustomRtxMaxNdr | read-create | current | Retransmission maximum allowed net data rate. Valid values are in 8000 bps increments. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.80 | ColumnadGenVdsl2ConfUsLp0CustomRtxMinDelay | read-create | current | Retransmission minimum allowed delay |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.81 | ColumnadGenVdsl2ConfUsLp0CustomRtxMaxDelay | read-create | current | Retransmission maximum allowed delay |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.82 | ColumnadGenVdsl2ConfUsLp0CustomRtxInpMinShine | read-create | current | Retransmission minimum impulse noise protection against SHINE when subcarrier spacing is 4.3125Khz |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.83 | ColumnadGenVdsl2ConfUsLp0CustomRtxInpMinRein | read-create | current | Retransmission minimum impulse noise protection against REIN when subcarrier spacing is 4.3125Khz |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.84 | ColumnadGenVdsl2ConfUsLp0CustomRtxIatRein | read-create | current | Retransmission inter-arrival time for REIN |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.85 | ColumnadGenVdsl2ConfUsLp0CustomRtxLeftrThresh | read-create | current | Retransmission parameter that specifies the fraction of the NDR used as the threshold to declare leftr defects. A minimum value of ETR/2 is required. A special… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.86 | ColumnadGenVdsl2ConfDsLp0RtxSetting | read-create | current | Retransmission setting |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.87 | ColumnadGenVdsl2ConfDsLp0CustomRtxMaxNdr | read-create | current | Retransmission maximum allowed net data rate. Valid values are in 8000 bps increments. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.88 | ColumnadGenVdsl2ConfDsLp0CustomRtxMinDelay | read-create | current | Retransmission minimum allowed delay |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.89 | ColumnadGenVdsl2ConfDsLp0CustomRtxMaxDelay | read-create | current | Retransmission maximum allowed delay |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.90 | ColumnadGenVdsl2ConfDsLp0CustomRtxInpMinShine | read-create | current | Retransmission minimum impulse noise protection against SHINE when subcarrier spacing is 4.3125Khz |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.91 | ColumnadGenVdsl2ConfDsLp0CustomRtxInpMinRein | read-create | current | Retransmission minimum impulse noise protection against REIN when subcarrier spacing is 4.3125Khz |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.92 | ColumnadGenVdsl2ConfDsLp0CustomRtxIatRein | read-create | current | Retransmission inter-arrival time for REIN |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.93 | ColumnadGenVdsl2ConfDsLp0CustomRtxLeftrThresh | read-create | current | Retransmission parameter that specifies the fraction of the NDR used as the threshold to declare leftr defects. A minimum value of ETR/2 is required. A special… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.94 | ColumnadGenVdsl2ConfUsLp1RtxSetting | read-create | current | Retransmission setting |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.95 | ColumnadGenVdsl2ConfUsLp1CustomRtxMaxNdr | read-create | current | Retransmission maximum allowed net data rate. Valid values are in 8000 bps increments. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.96 | ColumnadGenVdsl2ConfUsLp1CustomRtxMinDelay | read-create | current | Retransmission minimum allowed delay |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.97 | ColumnadGenVdsl2ConfUsLp1CustomRtxMaxDelay | read-create | current | Retransmission maximum allowed delay |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.98 | ColumnadGenVdsl2ConfUsLp1CustomRtxInpMinShine | read-create | current | Retransmission minimum impulse noise protection against SHINE when subcarrier spacing is 4.3125Khz |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.99 | ColumnadGenVdsl2ConfUsLp1CustomRtxInpMinRein | read-create | current | Retransmission minimum impulse noise protection against REIN when subcarrier spacing is 4.3125Khz |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.100 | ColumnadGenVdsl2ConfUsLp1CustomRtxIatRein | read-create | current | Retransmission inter-arrival time for REIN |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.101 | ColumnadGenVdsl2ConfUsLp1CustomRtxLeftrThresh | read-create | current | Retransmission parameter that specifies the fraction of the NDR used as the threshold to declare leftr defects. A minimum value of ETR/2 is required. A special… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.102 | ColumnadGenVdsl2ConfDsLp1RtxSetting | read-create | current | Retransmission setting |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.103 | ColumnadGenVdsl2ConfDsLp1CustomRtxMaxNdr | read-create | current | Retransmission maximum allowed net data rate. Valid values are in 8000 bps increments. |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.104 | ColumnadGenVdsl2ConfDsLp1CustomRtxMinDelay | read-create | current | Retransmission minimum allowed delay |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.105 | ColumnadGenVdsl2ConfDsLp1CustomRtxMaxDelay | read-create | current | Retransmission maximum allowed delay |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.106 | ColumnadGenVdsl2ConfDsLp1CustomRtxInpMinShine | read-create | current | Retransmission minimum impulse noise protection against SHINE when subcarrier spacing is 4.3125Khz |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.107 | ColumnadGenVdsl2ConfDsLp1CustomRtxInpMinRein | read-create | current | Retransmission minimum impulse noise protection against REIN when subcarrier spacing is 4.3125Khz |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.108 | ColumnadGenVdsl2ConfDsLp1CustomRtxIatRein | read-create | current | Retransmission inter-arrival time for REIN |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.109 | ColumnadGenVdsl2ConfDsLp1CustomRtxLeftrThresh | read-create | current | Retransmission parameter that specifies the fraction of the NDR used as the threshold to declare leftr defects. A minimum value of ETR/2 is required. A special… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.110 | ColumnadGenVdsl2ConfAmRadioFreqMask1 | read-create | current | AM radio station 1 center frequency in kHz. Carrier frequencies around this center frequency will be masked off. The value 0 will disable the masking of the ca… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.111 | ColumnadGenVdsl2ConfAmRadioFreqMask2 | read-create | current | AM radio station 2 center frequency in kHz. Carrier frequencies around this center frequency will be masked off. The value 0 will disable the masking of the ca… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.112 | ColumnadGenVdsl2ConfAmRadioFreqMask3 | read-create | current | AM radio station 3 center frequency in kHz. Carrier frequencies around this center frequency will be masked off. The value 0 will disable the masking of the ca… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.113 | ColumnadGenVdsl2ConfAmRadioFreqMask4 | read-create | current | AM radio station 4 center frequency in kHz. Carrier frequencies around this center frequency will be masked off. The value 0 will disable the masking of the ca… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.114 | ColumnadGenVdsl2ConfAmRadioFreqMask5 | read-create | current | AM radio station 5 center frequency in kHz. Carrier frequencies around this center frequency will be masked off. The value 0 will disable the masking of the ca… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.115 | ColumnadGenVdsl2ConfAmRadioFreqMask6 | read-create | current | AM radio station 6 center frequency in kHz. Carrier frequencies around this center frequency will be masked off. The value 0 will disable the masking of the ca… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.116 | ColumnadGenVdsl2ConfMemorySplitRatio | read-create | current | This parameter defines the ratio of how the interleaver memory is allocated between the downstream and upstream directions. For example a ratio of 2:1 will ass… |
| 1.3.6.1.4.1.664.5.65.1.1.1.1.117 | ColumnadGenVdsl2ConfRateAdaptConfigMode | read-create | current | This parameter determines how the upshift and downshift margins and times are configured when the rate mode is set to adaptAtRuntime. |
| 1.3.6.1.4.1.664.5.65.1.1.2 | TableadGenVdsl2LineAlarmConfProfileTable | not-accessible | current | This table contains information on the VDSL2 line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure… |
| 1.3.6.1.4.1.664.5.65.1.1.2.1 | RowadGenVdsl2LineAlarmConfProfileEntry | not-accessible | current | Each entry consists of a list of parameters that represents the configuration of an VDSL2 modem. `Static' profiles - profiles are automaticly created or destro… |
| 1.3.6.1.4.1.664.5.65.1.1.2.1.1 | ColumnadGenVdsl2LineAlarmConfProfileName | not-accessible | current | This object is used by the line configuration table in order to identify a row of this table. This value cannot be user-specified and is not dynamic. There is … |
| 1.3.6.1.4.1.664.5.65.1.1.2.1.2 | ColumnadGenVdsl2VtucThreshSnrMgn | read-create | current | The SNR margin on the VDSL2 interface below which the SNMP agent sends an adGenVdsl2USPerfSNRThresTrap. One trap will be sent per interval per interface. A val… |
| 1.3.6.1.4.1.664.5.65.1.1.2.1.3 | ColumnadGenVdsl2VtucThresh15MinLofs | read-create | current | The number of Loss of Frame Seconds encountered by an VDSL2 interface within any given 15 minutes performance data collection period, which causes the SNMP age… |
| 1.3.6.1.4.1.664.5.65.1.1.2.1.4 | ColumnadGenVdsl2VtucThresh15MinLoss | read-create | current | The number of Loss of Signal Seconds encountered by VDSL2 interface within any given 15 minutes performance data collection period, which causes the SNMP agent… |
| 1.3.6.1.4.1.664.5.65.1.1.2.1.5 | ColumnadGenVdsl2VtucThresh15MinLols | read-create | current | The number of Loss of Link Seconds encountered by VDSL2 interface within any given 15 minutes performance data collection period, which causes the SNMP agent t… |
| 1.3.6.1.4.1.664.5.65.1.1.2.1.6 | ColumnadGenVdsl2VtucThresh15MinLprs | read-create | current | The number of Loss of Power Seconds encountered by an VDSL2 interface within any given 15 minutes performance data collection period, which causes the SNMP age… |
| 1.3.6.1.4.1.664.5.65.1.1.2.1.7 | ColumnadGenVdsl2VtucThresh15MinEs | read-create | current | The number of Errored Seconds encountered by an VDSL2 interface within any given 15 minutes performance data collection period, which causes the SNMP agent to … |
| 1.3.6.1.4.1.664.5.65.1.1.2.1.8 | ColumnadGenVdsl2VtucThresh15MinSes | read-create | current | The number of Errored Seconds encountered by an VDSL2 interface within any given 15 minutes performance data collection period, which causes the SNMP agent to … |
| 1.3.6.1.4.1.664.5.65.1.1.2.1.9 | ColumnadGenVdsl2VtucThresh15MinUas | read-create | current | The number of Errored Seconds encountered by an VDSL2 interface within any given 15 minutes performance data collection period, which causes the SNMP agent to … |
| 1.3.6.1.4.1.664.5.65.1.1.2.1.10 | ColumnadGenVdsl2VturThreshSnrMgn | read-create | current | The SNR Margin on the VDSL2 interface below which the SNMP agent sends an adGenVdsl2DSPerfSNRThresTrap. One trap will be sent per interval per interface. A val… |
| 1.3.6.1.4.1.664.5.65.1.1.2.1.11 | ColumnadGenVdsl2VturThresh15MinLofs | read-create | current | The number of Loss of Frame Seconds encountered by an VDSL2 interface within any given 15 minutes performance data collection period, which causes the SNMP age… |
| 1.3.6.1.4.1.664.5.65.1.1.2.1.12 | ColumnadGenVdsl2VturThresh15MinLoss | read-create | current | The number of Loss of Signal Seconds encountered by an VDSL2 interface within any given 15 minutes performance data collection period, which causes the SNMP ag… |
| 1.3.6.1.4.1.664.5.65.1.1.2.1.13 | ColumnadGenVdsl2VturThresh15MinLprs | read-create | current | The number of Loss of Power Seconds encountered by an VDSL2 interface within any given 15 minutes performance data collection period, which causes the SNMP age… |
| 1.3.6.1.4.1.664.5.65.1.1.2.1.14 | ColumnadGenVdsl2VturThresh15MinEs | read-create | current | The number of Errored Seconds encountered by an VDSL2 interface within any given 15 minutes performance data collection period, which causes the SNMP agent to … |
| 1.3.6.1.4.1.664.5.65.1.1.2.1.15 | ColumnadGenVdsl2VturThresh15MinSes | read-create | current | The number of Errored Seconds encountered by an VDSL2 interface within any given 15 minutes performance data collection period, which causes the SNMP agent to … |
| 1.3.6.1.4.1.664.5.65.1.1.2.1.16 | ColumnadGenVdsl2VturThresh15MinUas | read-create | current | The number of Errored Seconds encountered by an VDSL2 interface within any given 15 minutes performance data collection period, which causes the SNMP agent to … |
| 1.3.6.1.4.1.664.5.65.1.1.2.1.17 | ColumnadGenVdsl2LineAlarmConfProfileRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active… |
| 1.3.6.1.4.1.664.5.65.1.1.2.1.18 | ColumnadGenVdsl2ThreshUsLp0RateUp | read-create | current | Configured change in rate on the latency path causing an adGenVdsl2VtucRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value… |
| 1.3.6.1.4.1.664.5.65.1.1.2.1.19 | ColumnadGenVdsl2ThreshUsLp0RateDown | read-create | current | Configured change in rate on the latency path causing an adGenVdsl2VtucRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate plus the value… |
| 1.3.6.1.4.1.664.5.65.1.1.2.1.20 | ColumnadGenVdsl2ThreshDsLp0RateUp | read-create | current | Configured change in rate on the latency path causing an adGenVdsl2VtucRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value… |
| 1.3.6.1.4.1.664.5.65.1.1.2.1.21 | ColumnadGenVdsl2ThreshDsLp0RateDown | read-create | current | Configured change in rate on the latency path causing an adGenVdsl2VtucRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate plus the value… |
| 1.3.6.1.4.1.664.5.65.1.1.2.1.22 | ColumnadGenVdsl2ThreshUsLp1RateUp | read-create | current | Configured change in rate on the latency path causing an adGenVdsl2VtucRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value… |
| 1.3.6.1.4.1.664.5.65.1.1.2.1.23 | ColumnadGenVdsl2ThreshUsLp1RateDown | read-create | current | Configured change in rate on the latency path causing an adGenVdsl2VtucRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate plus the value… |
| 1.3.6.1.4.1.664.5.65.1.1.2.1.24 | ColumnadGenVdsl2ThreshDsLp1RateUp | read-create | current | Configured change in rate on the latency path causing an adGenVdsl2VtucRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value… |
| 1.3.6.1.4.1.664.5.65.1.1.2.1.25 | ColumnadGenVdsl2ThreshDsLp1RateDown | read-create | current | Configured change in rate on the latency path causing an adGenVdsl2VtucRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate plus the value… |
| 1.3.6.1.4.1.664.5.65.1.1.3 | TableadGenVdsl2RestoreDefaultTable | not-accessible | current | This table contains items to restore line and/or alarm provisioning to their default values. |
| 1.3.6.1.4.1.664.5.65.1.1.3.1 | RowadGenVdsl2RestoreDefaultEntry | not-accessible | current | For later |
| 1.3.6.1.4.1.664.5.65.1.1.3.1.1 | ColumnadGenVdsl2ConfRestoreDefaults | read-write | current | This object is used to restore the set of provisioning indicated. A read will always return a value of 1. |
| 1.3.6.1.4.1.664.5.65.1.1.4 | TableadGenVdsl2BandConfProfileTable | not-accessible | current | This table contains information on the VDSL2 Band configuration. One entry in this table reflects band profile defined by a manager which can be used to config… |
| 1.3.6.1.4.1.664.5.65.1.1.4.1 | RowadGenVdsl2BandConfProfileEntry | not-accessible | current | Each entry consists of a list of parameters that represents the configuration of an VDSL2 modem band parameters. These entries extend that of the adGenVdsl2Lin… |
| 1.3.6.1.4.1.664.5.65.1.1.4.1.1 | ColumnadGenVdsl2BandNumber | read-only | current | VDSL2 band number. Band values are 1 - 5 corresponding to upstream bands U0..U4 and downstream bands D1..D5. |
| 1.3.6.1.4.1.664.5.65.1.1.4.1.2 | ColumnadGenVdsl2BandConfUsCustomPboCableA | read-create | current | Upstream power back-off band cable A parameter. This parameter defines the UPBO reference PSD used to compute the upstream power backoff for each upstream band… |
| 1.3.6.1.4.1.664.5.65.1.1.4.1.3 | ColumnadGenVdsl2BandConfUsCustomPboCableB | read-create | current | Upstream power back-off band cable B parameter. This parameter defines the UPBO reference PSD used to compute the upstream power backoff for each upstream band… |
| 1.3.6.1.4.1.664.5.65.1.1.5 | TableadGenVdsl2AlarmSlotProvTable | not-accessible | current | This table sets alarm severity for all VDSL2 interfaces. |
| 1.3.6.1.4.1.664.5.65.1.1.5.1 | RowadGenVdsl2AlarmSlotProvEntry | not-accessible | current | |
| 1.3.6.1.4.1.664.5.65.1.1.5.1.1 | ColumnadGenVdsl2AlmSlotLinkdownSeverity | read-write | current | Sets the Linkdown alarm severity (affects all VDSL2 Ports) |
| 1.3.6.1.4.1.664.5.65.1.2 | NodeadGenVdsl2Status | |||
| 1.3.6.1.4.1.664.5.65.1.2.1 | TableadGenVdsl2LineTable | not-accessible | current | This table includes common attributes describing both ends of the line. It is required for all VDSL2 physical interfaces. VDSL2 physical interfaces are those i… |
| 1.3.6.1.4.1.664.5.65.1.2.1.1 | RowadGenVdsl2LineEntry | not-accessible | current | An entry in adGenVdsl2LineTable. |
| 1.3.6.1.4.1.664.5.65.1.2.1.1.1 | ColumnadGenVdsl2LineCoding | read-only | current | Specifies the VDSL2 coding type used on this line. |
| 1.3.6.1.4.1.664.5.65.1.2.1.1.3 | ColumnadGenVdsl2LinePortServiceState | read-write | current | VDSL2 port service state. |
| 1.3.6.1.4.1.664.5.65.1.2.1.1.6 | ColumnadGenVdsl2LineStatus | read-only | current | Indicates current state of the dsl line. |
| 1.3.6.1.4.1.664.5.65.1.2.1.1.7 | ColumnadGenVdsl2LineUpTime | read-only | current | Indicates the amount of time the line has been in showtime. |
| 1.3.6.1.4.1.664.5.65.1.2.1.1.8 | ColumnadGenVdsl2LineCurrTransSysMode | read-only | current | A report of the current operating xDSL line transmission mode. offline (0) multiMode (1) t1413 (2), g9921a (3), g9921b (4), g9921c (5), g9921h (6), g9921i (7),… |
| 1.3.6.1.4.1.664.5.65.1.2.1.1.9 | ColumnadGenVdsl2LineCurrBandProfile | read-only | current | The current VDSL2 band profile in use. |
| 1.3.6.1.4.1.664.5.65.1.2.1.1.10 | ColumnadGenVdsl2LineCurrEstimatedLength | read-only | current | |
| 1.3.6.1.4.1.664.5.65.1.2.1.1.11 | ColumnadGenVdsl2LineCurrTpsTcFramingMode | read-only | current | Parameter that indicates the application-specific Transport Protocol Specific Transmission Convergence (TPS-TC) type. |
| 1.3.6.1.4.1.664.5.65.1.2.2 | TableadGenVdsl2VtucPhysTable | not-accessible | current | This table provides one row for each Vtuc. Each row contains the Physical Layer Parameters table for that Vtuc. VDSL2 physical interfaces are those ifEntries w… |
| 1.3.6.1.4.1.664.5.65.1.2.2.1 | RowadGenVdsl2VtucPhysEntry | not-accessible | current | An entry in the adGenVdsl2VtucPhysTable. |
| 1.3.6.1.4.1.664.5.65.1.2.2.1.1 | ColumnadGenVdsl2VtucInvSerialNumber | read-only | current | The vendor specific string that identifies the vendor equipment. |
| 1.3.6.1.4.1.664.5.65.1.2.2.1.2 | ColumnadGenVdsl2VtucInvVendorID | read-only | current | The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters. |
| 1.3.6.1.4.1.664.5.65.1.2.2.1.3 | ColumnadGenVdsl2VtucInvVersionNumber | read-only | current | The vendor specific version number sent by this ATU as part of the initialization messages. It is a copy of the binary version number field defined by the PHY[… |
| 1.3.6.1.4.1.664.5.65.1.2.2.1.4 | ColumnadGenVdsl2CurrUSSnrMgn | read-only | current | Noise Margin as seen by this ATU with respect to its received signal in tenth dB. |
| 1.3.6.1.4.1.664.5.65.1.2.2.1.5 | ColumnadGenVdsl2CurrUSAtn | read-only | current | Measured difference in the total power transmitted by the peer ATU and the total power received by this ATU. |
| 1.3.6.1.4.1.664.5.65.1.2.2.1.6 | ColumnadGenVdsl2VtucCurrStatus | read-only | current | Indicates current state of the Vtuc line. This is a bit-map of possible conditions. The various bit positions are: Bit 00 : There no defects on the line Bit 01… |
| 1.3.6.1.4.1.664.5.65.1.2.2.1.7 | ColumnadGenVdsl2VtucCurrOutputPwr | read-only | current | Measured total output power transmitted by this ATU. This is the measurement that was reported during the last activation sequence. |
| 1.3.6.1.4.1.664.5.65.1.2.2.1.8 | ColumnadGenVdsl2VtucCurrAttainableRate | read-only | current | Indicates the maximum currently attainable data rate by the ATU. This value will be equal or greater than the current line rate. |
| 1.3.6.1.4.1.664.5.65.1.2.2.1.9 | ColumnadGenVdsl2VtucCurrTxRate | read-only | current | The payload rate of the last successful train. |
| 1.3.6.1.4.1.664.5.65.1.2.2.1.10 | ColumnadGenVdsl2VtucPrevTxRate | read-only | current | The payload rate of the previous successful train. |
| 1.3.6.1.4.1.664.5.65.1.2.2.1.11 | ColumnadGenVdsl2VtucActTxPsd | read-only | current | Actual Power Spectrum Density (PSD) transmitted. The average transmit PSD over the sub-carriers. It ranges from -900 to 0 units of 0.1 dB (Physical values are … |
| 1.3.6.1.4.1.664.5.65.1.2.2.1.12 | ColumnadGenVdsl2VtucCurrTpsTcStatus | read-only | current | Attributes with this syntax are status parameters that reflect the failure status for Transmission Convergence (TC) layer of a given data layer interface (data… |
| 1.3.6.1.4.1.664.5.65.1.2.2.1.13 | ColumnadGenVdsl2VtucCurrTxLineRate | read-only | current | The line rate, including all payload and overhead rates. |
| 1.3.6.1.4.1.664.5.65.1.2.2.1.14 | ColumnadGenVdsl2VtucPrevTxLineRate | read-only | current | The line rate, including all payload and overhead rates, of the previous successful train. |
| 1.3.6.1.4.1.664.5.65.1.2.2.1.15 | ColumnadGenVdsl2VtucCircuitProviderCode | read-only | current | Returns local circuit provider code |
| 1.3.6.1.4.1.664.5.65.1.2.2.1.16 | ColumnadGenVdsl2VtucCurrTxRateMax | read-only | current | Returns max payload rate since last successful train. |
| 1.3.6.1.4.1.664.5.65.1.2.2.1.17 | ColumnadGenVdsl2VtucCurrTxRateMin | read-only | current | Returns min payload rate since last successful train. |
| 1.3.6.1.4.1.664.5.65.1.2.2.1.18 | ColumnadGenVdsl2VtucLastSraDownshift | read-only | current | Returns system uptime of last SRA downshift since last successful train. |
| 1.3.6.1.4.1.664.5.65.1.2.2.1.19 | ColumnadGenVdsl2VtucLastSraUpshift | read-only | current | Returns system uptime of last SRA upshift since last successful train. |
| 1.3.6.1.4.1.664.5.65.1.2.2.1.20 | ColumnadGenVdsl2VtucRtxUsed | read-only | current | Specifies whether retransmission is active in the transmit direction. |
| 1.3.6.1.4.1.664.5.65.1.2.2.1.21 | ColumnadGenVdsl2VtucRtxEtr | read-only | current | Expected throughput rate calculated from combined effect of impulse noise protection against worst-case REIN and worst-case SHINE and overhead from correction … |
| 1.3.6.1.4.1.664.5.65.1.2.3 | TableadGenVdsl2VturPhysTable | not-accessible | current | This table provides one row for each Vtur. Each row contains the Physical Layer Parameters table for that Vtur. VDSL2 physical interfaces are those ifEntries w… |
| 1.3.6.1.4.1.664.5.65.1.2.3.1 | RowadGenVdsl2VturPhysEntry | not-accessible | current | An entry in the adGenVdsl2VturPhysTable. |
| 1.3.6.1.4.1.664.5.65.1.2.3.1.1 | ColumnadGenVdsl2VturInvSerialNumber | read-only | current | The vendor specific string that identifies the vendor equipment. |
| 1.3.6.1.4.1.664.5.65.1.2.3.1.2 | ColumnadGenVdsl2VturInvVendorID | read-only | current | The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters. |
| 1.3.6.1.4.1.664.5.65.1.2.3.1.3 | ColumnadGenVdsl2VturInvVersionNumber | read-only | current | The vendor specific version number sent by this ATU as part of the initialization messages. It is a copy of the binary version number field defined by the PHY[… |
| 1.3.6.1.4.1.664.5.65.1.2.3.1.4 | ColumnadGenVdsl2CurrDSSnrMgn | read-only | current | Noise Margin as seen by this ATU with respect to its received signal in tenth dB. |
| 1.3.6.1.4.1.664.5.65.1.2.3.1.5 | ColumnadGenVdsl2CurrDSAtn | read-only | current | Measured difference in the total power transmitted by the peer ATU and the total power received by this ATU. |
| 1.3.6.1.4.1.664.5.65.1.2.3.1.6 | ColumnadGenVdsl2VturCurrStatus | read-only | current | Indicates current state of the Vtur line. This is a bit-map of possible conditions. Due to the isolation of the Vtur when line problems occur, many state condi… |
| 1.3.6.1.4.1.664.5.65.1.2.3.1.7 | ColumnadGenVdsl2VturCurrOutputPwr | read-only | current | Measured total output power transmitted by this ATU. This is the measurement that was reported during the last activation sequence. |
| 1.3.6.1.4.1.664.5.65.1.2.3.1.8 | ColumnadGenVdsl2VturCurrAttainableRate | read-only | current | Indicates the maximum currently attainable data rate by the ATU. This value will be equal or greater than the current line rate. |
| 1.3.6.1.4.1.664.5.65.1.2.3.1.9 | ColumnadGenVdsl2VturCurrTxRate | read-only | current | The payload rate of the last successful train. |
| 1.3.6.1.4.1.664.5.65.1.2.3.1.10 | ColumnadGenVdsl2VturPrevTxRate | read-only | current | The payload rate of the previous successful train. |
| 1.3.6.1.4.1.664.5.65.1.2.3.1.11 | ColumnadGenVdsl2VturActTxPsd | read-only | current | Actual Power Spectrum Density (PSD) transmitted. The average transmit PSD over the sub-carriers. It ranges from -900 to 0 units of 0.1 dB (Physical values are … |
| 1.3.6.1.4.1.664.5.65.1.2.3.1.12 | ColumnadGenVdsl2VturCurrTxLineRate | read-only | current | The line rate, including all payload and overhead rates. |
| 1.3.6.1.4.1.664.5.65.1.2.3.1.13 | ColumnadGenVdsl2VturPrevTxLineRate | read-only | current | The line rate, including all payload and overhead rates, of the previous successful train. |
| 1.3.6.1.4.1.664.5.65.1.2.3.1.14 | ColumnadGenVdsl2VturCircuitProviderCode | read-only | current | Returns remote circuit provider code |
| 1.3.6.1.4.1.664.5.65.1.2.3.1.15 | ColumnadGenVdsl2VturCircuitCapabilities | read-only | current | Returns remote circuit capabilities in bit masks with following order: 0 - Disabled, 1 - Enabled Byte Order of octet string: Byte 0. Byte 1. Byte 2. Byte 3. By… |
| 1.3.6.1.4.1.664.5.65.1.2.3.1.16 | ColumnadGenVdsl2VturCurrTxRateMax | read-only | current | Returns max payload rate since last successful train. |
| 1.3.6.1.4.1.664.5.65.1.2.3.1.17 | ColumnadGenVdsl2VturCurrTxRateMin | read-only | current | Returns min payload rate since last successful train. |
| 1.3.6.1.4.1.664.5.65.1.2.3.1.18 | ColumnadGenVdsl2VturLastSraDownshift | read-only | current | Returns system uptime of last SRA downshift since last successful train. |
| 1.3.6.1.4.1.664.5.65.1.2.3.1.19 | ColumnadGenVdsl2VturLastSraUpshift | read-only | current | Returns system uptime of last SRA upshift since last successful train. |
| 1.3.6.1.4.1.664.5.65.1.2.3.1.20 | ColumnadGenVdsl2VturRtxUsed | read-only | current | Specifies whether retransmission is active in the transmit direction. |
| 1.3.6.1.4.1.664.5.65.1.2.3.1.21 | ColumnadGenVdsl2VturRtxEtr | read-only | current | Expected throughput rate calculated from combined effect of impulse noise protection against worst-case REIN and worst-case SHINE and overhead from correction … |
| 1.3.6.1.4.1.664.5.65.1.2.4 | TableadGenVdsl2VtucChanTable | not-accessible | current | This table provides one row for each Vtuc channel. VDSL2 channel interfaces are those ifEntries where ifType is equal to channel. |
| 1.3.6.1.4.1.664.5.65.1.2.4.1 | RowadGenVdsl2VtucChanEntry | not-accessible | current | An entry in the adGenVdsl2VtucChanTable. |
| 1.3.6.1.4.1.664.5.65.1.2.4.1.1 | ColumnadGenVdsl2VtucChannelNumber | read-only | current | VDSL2 logical channel. Channel values are 1 - 4. |
| 1.3.6.1.4.1.664.5.65.1.2.4.1.2 | ColumnadGenVdsl2VtucChanInterleaveDelay | read-only | current | Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input … |
| 1.3.6.1.4.1.664.5.65.1.2.4.1.3 | ColumnadGenVdsl2VtucChanCurrTxRate | read-only | current | Actual transmit rate on this channel. |
| 1.3.6.1.4.1.664.5.65.1.2.4.1.4 | ColumnadGenVdsl2VtucChanPrevTxRate | read-only | current | The rate at the time of the last adGenVdsl2VtucRateChangeTrap event. It is also set at initialization to prevent a trap being sent. Rate changes less than adGe… |
| 1.3.6.1.4.1.664.5.65.1.2.4.1.5 | ColumnadGenVdsl2VtucChanCrcBlockLength | read-only | current | Indicates the length of the channel data-block on which the CRC operates. Refer to Line Code Specific MIBs, [11] and [12] for more information. |
| 1.3.6.1.4.1.664.5.65.1.2.4.1.6 | ColumnadGenVdsl2VtucChanINP | read-only | current | Current impulse noise protection on this channel, measured in increments of 0.1 DMT symbols. |
| 1.3.6.1.4.1.664.5.65.1.2.4.1.7 | ColumnadGenVdsl2VtucChanINPRein | read-only | current | Current impulse noise protection against REIN on this channel, measured in increments of 0.1 DMT symbols. |
| 1.3.6.1.4.1.664.5.65.1.2.5 | TableadGenVdsl2VturChanTable | not-accessible | current | This table provides one row for each Vtur channel. VDSL2 channel interfaces are those ifEntries where ifType is equal to channel. |
| 1.3.6.1.4.1.664.5.65.1.2.5.1 | RowadGenVdsl2VturChanEntry | not-accessible | current | An entry in the adGenVdsl2VturChanTable. |
| 1.3.6.1.4.1.664.5.65.1.2.5.1.1 | ColumnadGenVdsl2VturChannelNumber | read-only | current | VDSL2 logical channel. Channel values are 1 - 4. |
| 1.3.6.1.4.1.664.5.65.1.2.5.1.2 | ColumnadGenVdsl2VturChanInterleaveDelay | read-only | current | Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input … |
| 1.3.6.1.4.1.664.5.65.1.2.5.1.3 | ColumnadGenVdsl2VturChanCurrTxRate | read-only | current | Actual transmit rate on this channel. |
| 1.3.6.1.4.1.664.5.65.1.2.5.1.4 | ColumnadGenVdsl2VturChanPrevTxRate | read-only | current | The rate at the time of the last adGenVdsl2VturRateChangeTrap event. It is also set at initialization to prevent a trap being sent. Rate changes less than adGe… |
| 1.3.6.1.4.1.664.5.65.1.2.5.1.5 | ColumnadGenVdsl2VturChanCrcBlockLength | read-only | current | Indicates the length of the channel data-block on which the CRC operates. Refer to Line Code Specific MIBs, [11] and [12] for more information. |
| 1.3.6.1.4.1.664.5.65.1.2.5.1.6 | ColumnadGenVdsl2VturChanINP | read-only | current | Current impulse noise protection on this channel, measured in increments of 0.1 DMT symbols. |
| 1.3.6.1.4.1.664.5.65.1.2.5.1.7 | ColumnadGenVdsl2VturChanINPRein | read-only | current | Current impulse noise protection against REIN on this channel, measured in increments of 0.1 DMT symbols. |
| 1.3.6.1.4.1.664.5.65.1.2.6 | TableadGenVdsl2BandStatusTable | not-accessible | current | This table contains per band status information for VDSL2 configuration. One entry in this table reflects band profile defined by a manager which can be used t… |
| 1.3.6.1.4.1.664.5.65.1.2.6.1 | RowadGenVdsl2BandStatusEntry | not-accessible | current | Each entry consists of a list of band status items. |
| 1.3.6.1.4.1.664.5.65.1.2.6.1.1 | ColumnadGenVdsl2BandStatusNumber | read-only | current | VDSL2 band number. Band values are 1 - 5 corresponding to upstream bands U0..U4 and downstream bands D1..D5. |
| 1.3.6.1.4.1.664.5.65.1.2.6.1.2 | ColumnadGenVdsl2BandStatusUsStartCarrier | read-only | current | The starting carrier of the VDSL2 upstream band at 4.3125KHz spacing |
| 1.3.6.1.4.1.664.5.65.1.2.6.1.3 | ColumnadGenVdsl2BandStatusUsStopCarrier | read-only | current | The ending carrier of the VDSL2 upstream band at 4.3125KHz spacing |
| 1.3.6.1.4.1.664.5.65.1.2.6.1.4 | ColumnadGenVdsl2BandStatusUsMargin | read-only | current | Upstream Signal-to-Noise Ratio Margin per Band. This parameter is defined by usable band. The upstream signal to noise ratio margin per band is the maximum inc… |
| 1.3.6.1.4.1.664.5.65.1.2.6.1.5 | ColumnadGenVdsl2BandStatusUsLatn | read-only | current | Upstream Line Attenuation per Band. This parameter is defined per usable bands. It is the measured difference in the total power transmitted in this band and t… |
| 1.3.6.1.4.1.664.5.65.1.2.6.1.6 | ColumnadGenVdsl2BandStatusUsSatn | read-only | current | Upstream Signal Attenuation per Band. This parameter is defined per usable bands. It is the measured difference in the total power transmitted in this band and… |
| 1.3.6.1.4.1.664.5.65.1.2.6.1.7 | ColumnadGenVdsl2BandStatusDsStartCarrier | read-only | current | The starting carrier of the VDSL2 downstream band at 4.3125KHz spacing |
| 1.3.6.1.4.1.664.5.65.1.2.6.1.8 | ColumnadGenVdsl2BandStatusDsStopCarrier | read-only | current | The ending carrier of the VDSL2 downstream band at 4.3125KHz spacing |
| 1.3.6.1.4.1.664.5.65.1.2.6.1.9 | ColumnadGenVdsl2BandStatusDsMargin | read-only | current | Downstream Signal-to-Noise Ratio Margin per Band. This parameter is defined by usable band. The downstream signal to noise ratio margin per band is the maximum… |
| 1.3.6.1.4.1.664.5.65.1.2.6.1.10 | ColumnadGenVdsl2BandStatusDsLatn | read-only | current | Downstream Line Attenuation per Band. This parameter is defined per usable bands. It is the measured difference in the total power transmitted in this band and… |
| 1.3.6.1.4.1.664.5.65.1.2.6.1.11 | ColumnadGenVdsl2BandStatusDsSatn | read-only | current | Downstream Signal Attenuation per Band. This parameter is defined per usable bands. It is the measured difference in the total power transmitted in this band a… |
| 1.3.6.1.4.1.664.5.65.1.2.7 | TableadGenVdsl2ScStatusTable | not-accessible | current | This table contains per band status information for VDSL2 configuration. One entry in this table reflects band profile defined by a manager which can be used t… |
| 1.3.6.1.4.1.664.5.65.1.2.7.1 | RowadGenVdsl2ScStatusEntry | not-accessible | current | Each entry consists of a list of band status items. |
| 1.3.6.1.4.1.664.5.65.1.2.7.1.1 | ColumnadGenVdsl2ScStatusNumber | read-only | current | DMT subcarrier number. There are 4096 possible DMT sub-carriers spaced by 4.3125 KHz in the upstream and downstream directions. These carriers are typically br… |
| 1.3.6.1.4.1.664.5.65.1.2.7.1.2 | ColumnadGenVdsl2ScStatusUsBits | read-only | current | Bits allocated per subcarrier in the upstream direction. Value ranges from 0 to 15. A zero value indicates that no bits are allocated the upstream subcarrier. |
| 1.3.6.1.4.1.664.5.65.1.2.7.1.3 | ColumnadGenVdsl2ScStatusUsGain | read-only | current | Upstream gains allocation per subcarrier. It is an array of integer values in the range of 0 to 4095 for each subcarrier. The gain value is represented as a mu… |
| 1.3.6.1.4.1.664.5.65.1.2.7.1.4 | ColumnadGenVdsl2ScStatusUsSnr | read-only | current | Upstream signal to noise (SNR) per sub-carrier number. The SNR ranges from 0 to +95.0 dB with 0.1 dB steps. A special value of 955 indicates that no measuremen… |
| 1.3.6.1.4.1.664.5.65.1.2.7.1.5 | ColumnadGenVdsl2ScStatusDsBits | read-only | current | Bits allocated per subcarrier in the downstream direction. Value ranges from 0 to 15. A zero value indicates that no bits are allocated the downstream subcarri… |
| 1.3.6.1.4.1.664.5.65.1.2.7.1.6 | ColumnadGenVdsl2ScStatusDsGain | read-only | current | Downstream gains allocation per subcarrier. It is an array of integer values in the range of 0 to 4095 for each subcarrier. The gain value is represented as a … |
| 1.3.6.1.4.1.664.5.65.1.2.7.1.7 | ColumnadGenVdsl2ScStatusDsSnr | read-only | current | Downstream signal to noise (SNR) per sub-carrier number. The SNR ranges from 0 to +95.0 dB with 0.1 dB steps. A special value of 955 indicates that no measurem… |
| 1.3.6.1.4.1.664.5.65.1.2.7.1.8 | ColumnadGenVdsl2ScStatusUsQln | read-only | current | Upstream quiet line noise (QLN) per sub-carrier number. The QLN ranges from -150.5 to -23.0 dBm/Hz with 0.1 dB steps. A special value of -1505 indicates that n… |
| 1.3.6.1.4.1.664.5.65.1.2.7.1.9 | ColumnadGenVdsl2ScStatusDsQln | read-only | current | Upstream quiet line noise (QLN) per sub-carrier number. The QLN ranges from -150.5 to -23.0 dBm/Hz with 0.1 dB steps. A special value of -1505 indicates that n… |
| 1.3.6.1.4.1.664.5.65.1.2.7.1.10 | ColumnadGenVdsl2ScStatusUsHlog | read-only | current | Upstream channel transfer function (HLOG) per sub-carrier number. The HLOG ranges from -96.3 to +6.0 dB with 0.1 dB steps. A special value of -963 indicates th… |
| 1.3.6.1.4.1.664.5.65.1.2.7.1.11 | ColumnadGenVdsl2ScStatusDsHlog | read-only | current | Downstream channel transfer function (HLOG) per sub-carrier number. The HLOG ranges from -96.3 to +6.0 dB with 0.1 dB steps. A special value of -963 indicates … |
| 1.3.6.1.4.1.664.5.65.1.2.8 | TableadGenVdsl2ReserveInstanceBulkVDSLTlvTable | not-accessible | current | Table contains instances that are created when there is a request to reserve a Bulk VDSL instance |
| 1.3.6.1.4.1.664.5.65.1.2.8.1 | RowadGenVdsl2ReserveInstanceBulkVDSLTlvEntry | not-accessible | current | Index is the slot number. |
| 1.3.6.1.4.1.664.5.65.1.2.8.1.1 | ColumnadGenVdsl2ReserveInstanceBulkVDSLSlotInstance | read-only | current | Used to index the Tlv table; each time this is called by slot it creates an instance for that viewer |
| 1.3.6.1.4.1.664.5.65.1.2.9 | TableadGenVdsl2BulkVDSLTlvTable | not-accessible | current | Table contains filters that can be applied on the requested instances |
| 1.3.6.1.4.1.664.5.65.1.2.9.1 | RowadGenVdsl2BulkVDSLTlvEntry | not-accessible | current | Indexes are the slot and instance number |
| 1.3.6.1.4.1.664.5.65.1.2.9.1.1 | ColumnadGenVdsl2BulkVDSLTlvInstance | not-accessible | current | Used to index the table by TLV Instance number. |
| 1.3.6.1.4.1.664.5.65.1.2.9.1.2 | ColumnadGenVdsl2BulkVDSLTlvType | read-write | current | Used to set the type of VDSL info to return in the VDSL TLV instance: 1 - Bit Allocation Table (BAT), 2 - Signal Noise Ratio (SNR), 3 - Quiet Line Noise (QLN),… |
| 1.3.6.1.4.1.664.5.65.1.2.9.1.3 | ColumnadGenVdsl2BulkVDSLTlvPort | read-write | current | Used to set the VDSL port to get the info for VDSL TLV instance |
| 1.3.6.1.4.1.664.5.65.1.2.9.1.4 | ColumnadGenVdsl2BulkVDLSTlvCreate | read-write | current | Set this OID to 1 to update the instance with Bulk VDSL info depending on type set. A get on this OID always returns a 1. |
| 1.3.6.1.4.1.664.5.65.1.3 | NodeadGenVdsl2PM | |||
| 1.3.6.1.4.1.664.5.65.1.3.1 | TableadGenVdsl2VtucPerfDataTable | not-accessible | current | This table provides one row for each Vtuc. VDSL2 physical interfaces are those ifEntries where ifType is equal to vdsl(97). |
| 1.3.6.1.4.1.664.5.65.1.3.1.1 | RowadGenVdsl2VtucPerfDataEntry | not-accessible | current | An entry in adGenVdsl2VtucPerfDataTable. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.1 | ColumnadGenVdsl2VtucPerfLofs | read-only | current | Count of the number of Loss of Framing failures since agent reset. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.2 | ColumnadGenVdsl2VtucPerfLoss | read-only | current | Count of the number of Loss of Signal failures since agent reset. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.3 | ColumnadGenVdsl2VtucPerfLols | read-only | current | Count of the number of Loss of Link failures since agent reset. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.4 | ColumnadGenVdsl2VtucPerfLprs | read-only | current | Count of the number of Loss of Power failures since agent reset. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.5 | ColumnadGenVdsl2VtucPerfEs | read-only | current | Count of Errored Seconds since the unit was last reset. An Errored Second is a one-second interval containing one or more CRC anomalies, or one or more LOS or … |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.6 | ColumnadGenVdsl2VtucPerfInits | read-only | current | Count of the line initialization attempts since agent reset. Includes both successful and failed attempts. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.7 | ColumnadGenVdsl2VtucPerfSes | read-only | current | Count of Severely Errored Seconds since the unit was last reset. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.8 | ColumnadGenVdsl2VtucPerfUas | read-only | current | Count of Unavailable Seconds since the unit was last reset. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.9 | ColumnadGenVdsl2VtucPerfFecs | read-only | current | Count of the number of FEC Seconds since agent reset. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.10 | ColumnadGenVdsl2VtucPerfCrc | read-only | current | Count of the number of CRC anomolies since agent reset. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.11 | ColumnadGenVdsl2VtucPerfFec | read-only | current | Count of the number of FEC anomolies since agent reset. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.12 | ColumnadGenVdsl2VtucPerfValidIntervals | read-only | current | The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The valu… |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.13 | ColumnadGenVdsl2VtucPerfInvalidIntervals | read-only | current | The number of intervals in the range from 0 to the value of adGenVdsl2VtucPerfValidIntervals for which no data is available. This object will typically be zero… |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.14 | ColumnadGenVdsl2VtucPerfCurr15MinTimeElapsed | read-only | current | Total elapsed seconds in this interval. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.15 | ColumnadGenVdsl2VtucPerfCurr15MinLofs | read-only | current | Count of seconds in the current 15 minute interval when there was Loss of Framing. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.16 | ColumnadGenVdsl2VtucPerfCurr15MinLoss | read-only | current | Count of seconds in the current 15 minute interval when there was Loss of Signal. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.17 | ColumnadGenVdsl2VtucPerfCurr15MinLols | read-only | current | Count of seconds in the current 15 minute interval when there was Loss of Link. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.18 | ColumnadGenVdsl2VtucPerfCurr15MinLprs | read-only | current | Count of seconds in the current 15 minute interval when there was Loss of Power. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.19 | ColumnadGenVdsl2VtucPerfCurr15MinEs | read-only | current | Count of Errored Seconds during this interval. An Errored Second is a one-second interval containing one or more CRC anomalies, or one or more LOS or LOF defec… |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.20 | ColumnadGenVdsl2VtucPerfCurr15MinInits | read-only | current | Count of the line initialization attempts in the current 15 minute interval. Includes both successful and failed attempts. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.21 | ColumnadGenVdsl2VtucPerfCurr15MinSes | read-only | current | Count of Severely Errored Seconds in the current 15 minute interval. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.22 | ColumnadGenVdsl2VtucPerfCurr15MinUas | read-only | current | Count of Unavailable Seconds in the current 15 minute interval. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.23 | ColumnadGenVdsl2VtucPerfCurr15MinFecs | read-only | current | Count of FEC Seconds in the current 15 minute interval. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.24 | ColumnadGenVdsl2VtucPerfCurr15MinCrc | read-only | current | Count of CRC anomolies in the current 15 minute interval. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.25 | ColumnadGenVdsl2VtucPerfCurr15MinFec | read-only | current | Count of FEC anomolies in the current 15 minute interval. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.26 | ColumnadGenVdsl2VtucPerfCurr1DayTimeElapsed | read-only | current | Number of seconds that have elapsed since the beginning of the current 1-day interval. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.27 | ColumnadGenVdsl2VtucPerfCurr1DayLofs | read-only | current | Count of the number of seconds when there was Loss of Framing during the current day as measured by adGenVdsl2VtucPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.28 | ColumnadGenVdsl2VtucPerfCurr1DayLoss | read-only | current | Count of the number of seconds when there was Loss of Signal during the current day as measured by adGenVdsl2VtucPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.29 | ColumnadGenVdsl2VtucPerfCurr1DayLols | read-only | current | Count of the number of seconds when there was Loss of Link during the current day as measured by adGenVdsl2VtucPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.30 | ColumnadGenVdsl2VtucPerfCurr1DayLprs | read-only | current | Count of the number of seconds when there was Loss of Power during the current day as measured by adGenVdsl2VtucPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.31 | ColumnadGenVdsl2VtucPerfCurr1DayEs | read-only | current | Count of Errored Seconds (ES) since the beginning of the current 1-day interval. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.32 | ColumnadGenVdsl2VtucPerfCurr1DayInits | read-only | current | Count of the line initialization attempts in the day as measured by adGenVdsl2VtucPerfCurr1DayTimeElapsed. Includes both successful and failed attempts. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.33 | ColumnadGenVdsl2VtucPerfCurr1DaySes | read-only | current | Count of Severely Errored Seconds during the current day as measured by adGenVdsl2VtucPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.34 | ColumnadGenVdsl2VtucPerfCurr1DayUas | read-only | current | Count of Unavailable Seconds during the current day as measured by adGenVdsl2VtucPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.35 | ColumnadGenVdsl2VtucPerfCurr1DayFecs | read-only | current | Count of FEC Seconds during the current day as measured by adGenVdsl2VtucPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.36 | ColumnadGenVdsl2VtucPerfCurr1DayCrc | read-only | current | Count of CRC anomolies during the current day as measured by adGenVdsl2VtucPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.37 | ColumnadGenVdsl2VtucPerfCurr1DayFec | read-only | current | Count of FEC anomolies during the current day as measured by adGenVdsl2VtucPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.38 | ColumnadGenVdsl2VtucPerfTcTxUnits | read-only | current | Count of total transmitted transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.39 | ColumnadGenVdsl2VtucPerfTcTxDataUnits | read-only | current | Count of data carrying transmitted transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.40 | ColumnadGenVdsl2VtucPerfTcTxDataOctets | read-only | current | Count of octets in data carrying transmitted transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.41 | ColumnadGenVdsl2VtucPerfTcTxIdleUnits | read-only | current | Count of idle/pause transmitted transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.42 | ColumnadGenVdsl2VtucPerfTcRxUnits | read-only | current | Count of total transmitted transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.43 | ColumnadGenVdsl2VtucPerfTcRxDataUnits | read-only | current | Count of data carrying received transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.44 | ColumnadGenVdsl2VtucPerfTcRxDataOctets | read-only | current | Count of octets in data carrying received transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.45 | ColumnadGenVdsl2VtucPerfTcRxIdleUnits | read-only | current | Count of idle/pause received transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.46 | ColumnadGenVdsl2VtucPerfTcRxErroredUnits | read-only | current | Count of errored received transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.47 | ColumnadGenVdsl2VtucPerfSraDownshifts | read-only | current | Free-rolling count of SRA payload rate downshifts since last successful train. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.48 | ColumnadGenVdsl2VtucPerfSraUpshifts | read-only | current | Free-rolling count of SRA payload rate upshifts since last successful train. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.49 | ColumnadGenVdsl2VtucPerfCurr15MinSraDownshifts | read-only | current | Count of SRA payload rate downshifts since last successful train in the current 15-min interval |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.50 | ColumnadGenVdsl2VtucPerfCurr15MinSraUpshifts | read-only | current | Count of SRA payload rate upshifts since last successful train in the current 15-min interval |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.51 | ColumnadGenVdsl2VtucPerfCurr15MinSraRateMax | read-only | current | Max payload rate in the current 15-min interval since last successful train. Min and max rate should only be different in the case of an SRA event. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.52 | ColumnadGenVdsl2VtucPerfCurr15MinSraRateMin | read-only | current | Min payload rate in the current 15-min interval since last successful train. Min and max rate should only be different in the case of an SRA event. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.53 | ColumnadGenVdsl2VtucPerfCurr1DaySraDownshifts | read-only | current | Count of SRA payload rate downshifts since last successful train in the current 24-hr interval |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.54 | ColumnadGenVdsl2VtucPerfCurr1DaySraUpshifts | read-only | current | Count of SRA payload rate upshifts since last successful train in the current 24-hr interval |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.55 | ColumnadGenVdsl2VtucPerfCurr1DaySraRateMax | read-only | current | Max payload rate in the current 24-hr interval since last successful train. Min and max rate should only be different in the case of an SRA event. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.56 | ColumnadGenVdsl2VtucPerfCurr1DaySraRateMin | read-only | current | Min payload rate in the current 24-hr interval since last successful train. Min and max rate should only be different in the case of an SRA event. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.57 | ColumnadGenVdsl2VtucPerfRtxMinEftr | read-only | current | Retransmission parameter defined as the minimum of the error-free throughput rate observed since reset. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.58 | ColumnadGenVdsl2VtucPerfRtxLeftrs | read-only | current | Count of low error-free throughput rate defect seconds since reset. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.59 | ColumnadGenVdsl2VtucPerfCurr15MinRtxMinEftr | read-only | current | Retransmission parameter defined as the minimum of the error-free throughput rate observed in the current 15-min interval. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.60 | ColumnadGenVdsl2VtucPerfCurr15MinRtxLeftrs | read-only | current | Count of low error-free throughput rate defect seconds in the current 15-min interval. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.61 | ColumnadGenVdsl2VtucPerfCurr1DayRtxMinEftr | read-only | current | Retransmission parameter showing the minimum of the error-free throughput rate observed in the current 24-hr interval. |
| 1.3.6.1.4.1.664.5.65.1.3.1.1.62 | ColumnadGenVdsl2VtucPerfCurr1DayRtxLeftrs | read-only | current | Count of low error-free throughput rate defect seconds in the current 24-hr interval. |
| 1.3.6.1.4.1.664.5.65.1.3.2 | TableadGenVdsl2VturPerfDataTable | not-accessible | current | This table provides one row for each Vtur. VDSL2 physical interfaces are those ifEntries where ifType is equal to vdsl(97). |
| 1.3.6.1.4.1.664.5.65.1.3.2.1 | RowadGenVdsl2VturPerfDataEntry | not-accessible | current | An entry in adGenVdsl2VturPerfDataTable. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.1 | ColumnadGenVdsl2VturPerfLofs | read-only | current | Count of the number of Loss of Framing failures since agent reset. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.2 | ColumnadGenVdsl2VturPerfLoss | read-only | current | Count of the number of Loss of Signal failures since agent reset. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.3 | ColumnadGenVdsl2VturPerfLprs | read-only | current | Count of the number of Loss of Power failures since agent reset. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.4 | ColumnadGenVdsl2VturPerfEs | read-only | current | Count of Errored Seconds since the unit was last reset. An Errored Second is a one-second interval containing one or more CRC anomalies, or one or more LOS or … |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.5 | ColumnadGenVdsl2VturPerfSes | read-only | current | Count of Severely Errored Seconds since the unit was last reset. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.6 | ColumnadGenVdsl2VturPerfUas | read-only | current | Count of Unavailable Seconds since the unit was last reset. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.7 | ColumnadGenVdsl2VturPerfFecs | read-only | current | Count of the number of FEC Seconds since agent reset. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.8 | ColumnadGenVdsl2VturPerfCrc | read-only | current | Count of the number of CRC anomolies since agent reset. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.9 | ColumnadGenVdsl2VturPerfFec | read-only | current | Count of the number of FEC anomolies since agent reset. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.10 | ColumnadGenVdsl2VturPerfValidIntervals | read-only | current | The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The valu… |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.11 | ColumnadGenVdsl2VturPerfInvalidIntervals | read-only | current | The number of intervals in the range from 0 to the value of adGenVdsl2VturPerfValidIntervals for which no data is available. This object will typically be zero… |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.12 | ColumnadGenVdsl2VturPerfCurr15MinTimeElapsed | read-only | current | Total elapsed seconds in this interval. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.13 | ColumnadGenVdsl2VturPerfCurr15MinLofs | read-only | current | Count of seconds in the current 15 minute interval when there was Loss of Framing. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.14 | ColumnadGenVdsl2VturPerfCurr15MinLoss | read-only | current | Count of seconds in the current 15 minute interval when there was Loss of Signal. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.15 | ColumnadGenVdsl2VturPerfCurr15MinLprs | read-only | current | Count of seconds in the current 15 minute interval when there was Loss of Power. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.16 | ColumnadGenVdsl2VturPerfCurr15MinEs | read-only | current | Count of Errored Seconds in the current 15 minute interval. An Errored Second is a one-second interval containing one or more CRC anomalies, or one or more LOS… |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.17 | ColumnadGenVdsl2VturPerfCurr15MinSes | read-only | current | Count of Severely Errored Seconds in the current 15 minute interval. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.18 | ColumnadGenVdsl2VturPerfCurr15MinUas | read-only | current | Count of Unavailable Seconds in the current 15 minute interval. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.19 | ColumnadGenVdsl2VturPerfCurr15MinFecs | read-only | current | Count of FEC Seconds in the current 15 minute interval. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.20 | ColumnadGenVdsl2VturPerfCurr15MinCrc | read-only | current | Count of CRC anomolies in the current 15 minute interval. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.21 | ColumnadGenVdsl2VturPerfCurr15MinFec | read-only | current | Count of FEC anomolies in the current 15 minute interval. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.22 | ColumnadGenVdsl2VturPerfCurr1DayTimeElapsed | read-only | current | Number of seconds that have elapsed since the beginning of the current 1-day interval. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.23 | ColumnadGenVdsl2VturPerfCurr1DayLofs | read-only | current | Count of the number of seconds when there was Loss of Framing during the current day as measured by adGenVdsl2VturPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.24 | ColumnadGenVdsl2VturPerfCurr1DayLoss | read-only | current | Count of the number of seconds when there was Loss of Signal during the current day as measured by adGenVdsl2VturPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.25 | ColumnadGenVdsl2VturPerfCurr1DayLprs | read-only | current | Count of the number of seconds when there was Loss of Power during the current day as measured by adGenVdsl2VturPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.26 | ColumnadGenVdsl2VturPerfCurr1DayEs | read-only | current | Count of the number of seconds when there was Errored Seconds during the current day as measured by adGenVdsl2VturPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.27 | ColumnadGenVdsl2VturPerfCurr1DaySes | read-only | current | Count of Severely Errored Seconds during the current day as measured by adGenVdsl2VturPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.28 | ColumnadGenVdsl2VturPerfCurr1DayUas | read-only | current | Count of Unavailable Seconds during the current day as measured by adGenVdsl2VturPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.29 | ColumnadGenVdsl2VturPerfCurr1DayFecs | read-only | current | Count of FEC Seconds during the current day as measured by adGenVdsl2VturPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.30 | ColumnadGenVdsl2VturPerfCurr1DayCrc | read-only | current | Count of CRC anomolies during the current day as measured by adGenVdsl2VturPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.31 | ColumnadGenVdsl2VturPerfCurr1DayFec | read-only | current | Count of FEC anomolies during the current day as measured by adGenVdsl2VturPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.32 | ColumnadGenVdsl2VturPerfTcTxUnits | read-only | current | Count of total transmitted transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.33 | ColumnadGenVdsl2VturPerfTcTxDataUnits | read-only | current | Count of data carrying transmitted transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.34 | ColumnadGenVdsl2VturPerfTcTxDataOctets | read-only | current | Count of octets in data carrying transmitted transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.35 | ColumnadGenVdsl2VturPerfTcTxIdleUnits | read-only | current | Count of idle/pause transmitted transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.36 | ColumnadGenVdsl2VturPerfTcRxUnits | read-only | current | Count of total transmitted transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.37 | ColumnadGenVdsl2VturPerfTcRxDataUnits | read-only | current | Count of data carrying received transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.38 | ColumnadGenVdsl2VturPerfTcRxDataOctets | read-only | current | Count of octets in data carrying received transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.39 | ColumnadGenVdsl2VturPerfTcRxIdleUnits | read-only | current | Count of idle/pause received transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.40 | ColumnadGenVdsl2VturPerfTcRxErroredUnits | read-only | current | Count of errored received transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.41 | ColumnadGenVdsl2VturPerfSraDownshifts | read-only | current | Free-rolling count of SRA payload rate downshifts since last successful train. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.42 | ColumnadGenVdsl2VturPerfSraUpshifts | read-only | current | Free-rolling count of SRA payload rate upshifts since last successful train. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.43 | ColumnadGenVdsl2VturPerfCurr15MinSraDownshifts | read-only | current | Count of SRA payload rate downshifts since last successful train in the current 15-min interval |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.44 | ColumnadGenVdsl2VturPerfCurr15MinSraUpshifts | read-only | current | Count of SRA payload rate upshifts since last successful train in the current 15-min interval |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.45 | ColumnadGenVdsl2VturPerfCurr15MinSraRateMax | read-only | current | Max payload rate in the current 15-min interval since last successful train. Min and max rate should only be different in the case of an SRA event. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.46 | ColumnadGenVdsl2VturPerfCurr15MinSraRateMin | read-only | current | Min payload rate in the current 15-min interval since last successful train. Min and max rate should only be different in the case of an SRA event. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.47 | ColumnadGenVdsl2VturPerfCurr1DaySraDownshifts | read-only | current | Count of SRA payload rate downshifts since last successful train in the current 24-hr interval |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.48 | ColumnadGenVdsl2VturPerfCurr1DaySraUpshifts | read-only | current | Count of SRA payload rate upshifts since last successful train in the current 24-hr interval |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.49 | ColumnadGenVdsl2VturPerfCurr1DaySraRateMax | read-only | current | Max payload rate in the current 24-hr interval since last successful train. Min and max rate should only be different in the case of an SRA event. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.50 | ColumnadGenVdsl2VturPerfCurr1DaySraRateMin | read-only | current | Min payload rate in the current 24-hr interval since last successful train. Min and max rate should only be different in the case of an SRA event. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.51 | ColumnadGenVdsl2VturPerfRtxMinEftr | read-only | current | Retransmission parameter defined as the minimum of the error-free throughput rate observed since reset. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.52 | ColumnadGenVdsl2VturPerfRtxLeftrs | read-only | current | Count of low error-free throughput rate defect seconds since reset. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.53 | ColumnadGenVdsl2VturPerfCurr15MinRtxMinEftr | read-only | current | Retransmission parameter defined as the minimum of the error-free throughput rate observed in the current 15-min interval. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.54 | ColumnadGenVdsl2VturPerfCurr15MinRtxLeftrs | read-only | current | Count of low error-free throughput rate defect seconds in the current 15-min interval. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.55 | ColumnadGenVdsl2VturPerfCurr1DayRtxMinEftr | read-only | current | Retransmission parameter showing the minimum of the error-free throughput rate observed in the current 24-hr interval. |
| 1.3.6.1.4.1.664.5.65.1.3.2.1.56 | ColumnadGenVdsl2VturPerfCurr1DayRtxLeftrs | read-only | current | Count of low error-free throughput rate defect seconds in the current 24-hr interval. |
| 1.3.6.1.4.1.664.5.65.1.3.3 | TableadGenVdsl2VtucIntervalTable | not-accessible | current | This table provides one row for each Vtuc performance data collection interval. VDSL2 physical interfaces are those ifEntries where ifType is equal to vdsl(97). |
| 1.3.6.1.4.1.664.5.65.1.3.3.1 | RowadGenVdsl2VtucIntervalEntry | not-accessible | current | An entry in the adGenVdsl2VtucIntervalTable. |
| 1.3.6.1.4.1.664.5.65.1.3.3.1.1 | ColumnadGenVdsl2VtucIntervalNumber | read-only | current | Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional. |
| 1.3.6.1.4.1.664.5.65.1.3.3.1.2 | ColumnadGenVdsl2VtucIntervalLofs | read-only | current | Count of seconds in the interval when there was Loss of Framing. |
| 1.3.6.1.4.1.664.5.65.1.3.3.1.3 | ColumnadGenVdsl2VtucIntervalLoss | read-only | current | Count of seconds in the interval when there was Loss of Signal. |
| 1.3.6.1.4.1.664.5.65.1.3.3.1.4 | ColumnadGenVdsl2VtucIntervalLols | read-only | current | Count of seconds in the interval when there was Loss of Link. |
| 1.3.6.1.4.1.664.5.65.1.3.3.1.5 | ColumnadGenVdsl2VtucIntervalLprs | read-only | current | Count of seconds in the interval when there was Loss of Power. |
| 1.3.6.1.4.1.664.5.65.1.3.3.1.6 | ColumnadGenVdsl2VtucIntervalES | read-only | current | Count of Errored Seconds in the interval. |
| 1.3.6.1.4.1.664.5.65.1.3.3.1.7 | ColumnadGenVdsl2VtucIntervalInits | read-only | current | Count of the line initialization attempts during the interval. Includes both successful and failed attempts. |
| 1.3.6.1.4.1.664.5.65.1.3.3.1.8 | ColumnadGenVdsl2VtucIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.664.5.65.1.3.3.1.9 | ColumnadGenVdsl2VtucIntervalSES | read-only | current | Count of Severely Errored Seconds in the interval. |
| 1.3.6.1.4.1.664.5.65.1.3.3.1.10 | ColumnadGenVdsl2VtucIntervalUAS | read-only | current | Count of Unavailable Seconds in the interval. |
| 1.3.6.1.4.1.664.5.65.1.3.3.1.11 | ColumnadGenVdsl2VtucIntervalFECs | read-only | current | Count of seconds in the interval during which at least one forward error correction event took place. |
| 1.3.6.1.4.1.664.5.65.1.3.3.1.12 | ColumnadGenVdsl2VtucIntervalFEC | read-only | current | Count of forward error correction events that took place in the interval. |
| 1.3.6.1.4.1.664.5.65.1.3.3.1.13 | ColumnadGenVdsl2VtucIntervalCRC | read-only | current | Count of CRC anomolies that took place in the interval. |
| 1.3.6.1.4.1.664.5.65.1.3.3.1.14 | ColumnadGenVdsl2VtucIntervalSraDownshifts | read-only | current | Count of SRA payload rate downshifts since last successful train in the specified 15-min interval |
| 1.3.6.1.4.1.664.5.65.1.3.3.1.15 | ColumnadGenVdsl2VtucIntervalSraUpshifts | read-only | current | Count of SRA payload rate upshifts since last successful train in the specified 15-min interval |
| 1.3.6.1.4.1.664.5.65.1.3.3.1.16 | ColumnadGenVdsl2VtucIntervalSraRateMax | read-only | current | Max payload rate in the specified 15-min interval since last successful train. |
| 1.3.6.1.4.1.664.5.65.1.3.3.1.17 | ColumnadGenVdsl2VtucIntervalSraRateMin | read-only | current | Min payload rate in the specified 15-min interval since last successful train. |
| 1.3.6.1.4.1.664.5.65.1.3.3.1.18 | ColumnadGenVdsl2VtucIntervalRtxMinEftr | read-only | current | Retransmission parameter defined as the minimum of the error-free throughput rate observed in the specified 15-min interval. |
| 1.3.6.1.4.1.664.5.65.1.3.3.1.19 | ColumnadGenVdsl2VtucIntervalRtxLeftrs | read-only | current | Count of low error-free throughput rate defect seconds in the specified 15-min interval. |
| 1.3.6.1.4.1.664.5.65.1.3.4 | TableadGenVdsl2VturIntervalTable | not-accessible | current | This table provides one row for each Vtur performance data collection 1 Day interval. VDSL2 physical interfaces are those ifEntries where ifType is equal to vd… |
| 1.3.6.1.4.1.664.5.65.1.3.4.1 | RowadGenVdsl2VturIntervalEntry | not-accessible | current | An entry in the adGenVdsl2VturIntervalTable. |
| 1.3.6.1.4.1.664.5.65.1.3.4.1.1 | ColumnadGenVdsl2VturIntervalNumber | read-only | current | Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional. |
| 1.3.6.1.4.1.664.5.65.1.3.4.1.2 | ColumnadGenVdsl2VturIntervalLofs | read-only | current | Count of seconds in the interval when there was Loss of Framing. |
| 1.3.6.1.4.1.664.5.65.1.3.4.1.3 | ColumnadGenVdsl2VturIntervalLoss | read-only | current | Count of seconds in the interval when there was Loss of Signal. |
| 1.3.6.1.4.1.664.5.65.1.3.4.1.4 | ColumnadGenVdsl2VturIntervalLprs | read-only | current | Count of seconds in the interval when there was Loss of Power. |
| 1.3.6.1.4.1.664.5.65.1.3.4.1.5 | ColumnadGenVdsl2VturIntervalES | read-only | current | Count of Errored Seconds in the interval. |
| 1.3.6.1.4.1.664.5.65.1.3.4.1.6 | ColumnadGenVdsl2VturIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.664.5.65.1.3.4.1.7 | ColumnadGenVdsl2VturIntervalSES | read-only | current | Count of Severely Errored Seconds in the interval. |
| 1.3.6.1.4.1.664.5.65.1.3.4.1.8 | ColumnadGenVdsl2VturIntervalUAS | read-only | current | Count of Unavailable Seconds in the interval. |
| 1.3.6.1.4.1.664.5.65.1.3.4.1.9 | ColumnadGenVdsl2VturIntervalFECs | read-only | current | Count of seconds in the interval during which at least one forward error correction event took place. |
| 1.3.6.1.4.1.664.5.65.1.3.4.1.10 | ColumnadGenVdsl2VturIntervalFEC | read-only | current | Count of forward error correction events that took place in the interval. |
| 1.3.6.1.4.1.664.5.65.1.3.4.1.11 | ColumnadGenVdsl2VturIntervalCRC | read-only | current | Count of CRC anomolies that took place in the interval. |
| 1.3.6.1.4.1.664.5.65.1.3.4.1.12 | ColumnadGenVdsl2VturIntervalSraDownshifts | read-only | current | Count of SRA payload rate downshifts since last successful train in the specified 15-min interval |
| 1.3.6.1.4.1.664.5.65.1.3.4.1.13 | ColumnadGenVdsl2VturIntervalSraUpshifts | read-only | current | Count of SRA payload rate upshifts since last successful train in the specified 15-min interval |
| 1.3.6.1.4.1.664.5.65.1.3.4.1.14 | ColumnadGenVdsl2VturIntervalSraRateMax | read-only | current | Max payload rate in the specified 15-min interval since last successful train. |
| 1.3.6.1.4.1.664.5.65.1.3.4.1.15 | ColumnadGenVdsl2VturIntervalSraRateMin | read-only | current | Min payload rate in the specified 15-min interval since last successful train. |
| 1.3.6.1.4.1.664.5.65.1.3.4.1.16 | ColumnadGenVdsl2VturIntervalRtxMinEftr | read-only | current | Retransmission parameter defined as the minimum of the error-free throughput rate observed in the specified 15-min interval. |
| 1.3.6.1.4.1.664.5.65.1.3.4.1.17 | ColumnadGenVdsl2VturIntervalRtxLeftrs | read-only | current | Count of low error-free throughput rate defect seconds in the specified 15-min interval. |
| 1.3.6.1.4.1.664.5.65.1.3.5 | TableadGenVdsl2VtucChanPerfDataTable | not-accessible | current | This table provides one row for each Vtuc channel. VDSL2 channel interfaces can range from 1 -4 |
| 1.3.6.1.4.1.664.5.65.1.3.5.1 | RowadGenVdsl2VtucChanPerfDataEntry | not-accessible | current | An entry in adGenVdsl2VtucChanPerfDataTable. |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.1 | ColumnadGenVdsl2VtucChanNumber | read-only | current | VDSL2 logical channel. Channel values are 1 - 4. |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.2 | ColumnadGenVdsl2VtucChanReceivedBlks | read-only | current | Count of all encoded blocks received on this channel since agent reset. |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.3 | ColumnadGenVdsl2VtucChanTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel since agent reset. |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.4 | ColumnadGenVdsl2VtucChanCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected since agent reset. These blocks are passed on as good data. |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.5 | ColumnadGenVdsl2VtucChanUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors since agent reset. |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.6 | ColumnadGenVdsl2VtucChanPerfValidIntervals | read-only | current | The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The valu… |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.7 | ColumnadGenVdsl2VtucChanPerfInvalidIntervals | read-only | current | The number of intervals in the range from 0 to the value of adGenVdsl2VtucChanPerfValidIntervals for which no data is available. This object will typically be … |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.8 | ColumnadGenVdsl2VtucChanPerfCurr15MinTimeElapsed | read-only | current | Total elapsed seconds in this interval. |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.9 | ColumnadGenVdsl2VtucChanPerfCurr15MinReceivedBlks | read-only | current | Count of all encoded blocks received on this channel within the current 15 minute interval. |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.10 | ColumnadGenVdsl2VtucChanPerfCurr15MinTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel within the current 15 minute interval. |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.11 | ColumnadGenVdsl2VtucChanPerfCurr15MinCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected on this channel within the current 15 minute interval. |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.12 | ColumnadGenVdsl2VtucChanPerfCurr15MinUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors on this channel within the current 15 minute interval. |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.13 | ColumnadGenVdsl2VtucChanPerfCurr1DayTimeElapsed | read-only | current | Number of seconds that have elapsed since the beginning of the current 1-day interval. |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.14 | ColumnadGenVdsl2VtucChanPerfCurr1DayReceivedBlks | read-only | current | Count of all encoded blocks received on this channel during the current day as measured by adGenVdsl2VtucChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.15 | ColumnadGenVdsl2VtucChanPerfCurr1DayTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel during the current day as measured by adGenVdsl2VtucChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.16 | ColumnadGenVdsl2VtucChanPerfCurr1DayCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected on this channel during the current day as measured by adGenVdsl2VtucChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.17 | ColumnadGenVdsl2VtucChanPerfCurr1DayUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors on this channel during the current day as measured by adGenVdsl2VtucChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.18 | ColumnadGenVdsl2VtucChanPerfTcTxUnits | read-only | current | Count of total transmitted transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.19 | ColumnadGenVdsl2VtucChanPerfTcTxDataUnits | read-only | current | Count of data carrying transmitted transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.20 | ColumnadGenVdsl2VtucChanPerfTcTxDataOctets | read-only | current | Count of octets in data carrying transmitted transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.21 | ColumnadGenVdsl2VtucChanPerfTcTxIdleUnits | read-only | current | Count of idle/pause transmitted transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.22 | ColumnadGenVdsl2VtucChanPerfTcRxUnits | read-only | current | Count of total transmitted transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.23 | ColumnadGenVdsl2VtucChanPerfTcRxDataUnits | read-only | current | Count of data carrying received transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.24 | ColumnadGenVdsl2VtucChanPerfTcRxDataOctets | read-only | current | Count of octets in data carrying received transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.25 | ColumnadGenVdsl2VtucChanPerfTcRxIdleUnits | read-only | current | Count of idle/pause received transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.26 | ColumnadGenVdsl2VtucChanPerfTcRxErroredUnits | read-only | current | Count of errored received transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.27 | ColumnadGenVdsl2VtucChanPerfRtxUncorrectedDtu | read-only | current | Count of DTUs since reset that have been detected in error and that have not been corrected by one or more retransmissions within the maximum delay constraint. |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.28 | ColumnadGenVdsl2VtucChanPerfRtxCorrectedDtu | read-only | current | Count of DTUs since reset that have been detected in error and that have been successfully corrected by a retransmission within the maximum delay constraint. |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.29 | ColumnadGenVdsl2VtucChanPerfRtxRetransmittedDtu | read-only | current | Count of DTUs since reset that have been retransmitted. |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.30 | ColumnadGenVdsl2VtucChanPerfCurr15MinRtxUncorrectedDtu | read-only | current | Count of DTUs in the current 15-min interval that have been detected in error and that have not been corrected by one or more retransmissions within the maximu… |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.31 | ColumnadGenVdsl2VtucChanPerfCurr15MinRtxCorrectedDtu | read-only | current | Count of DTUs in the current 15-min interval that have been detected in error and that have been successfully corrected by a retransmission within the maximum … |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.32 | ColumnadGenVdsl2VtucChanPerfCurr15MinRtxRetransmittedDtu | read-only | current | Count of DTUs in the current 15-min interval that have been retransmitted. |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.33 | ColumnadGenVdsl2VtucChanPerfCurr1DayRtxUncorrectedDtu | read-only | current | Count of DTUs in the current 24-hr interval that have been detected in error and that have not been corrected by one or more retransmissions within the maximum… |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.34 | ColumnadGenVdsl2VtucChanPerfCurr1DayRtxCorrectedDtu | read-only | current | Count of DTUs in the current 24-hr interval that have been detected in error and that have been successfully corrected by a retransmission within the maximum d… |
| 1.3.6.1.4.1.664.5.65.1.3.5.1.35 | ColumnadGenVdsl2VtucChanPerfCurr1DayRtxRetransmittedDtu | read-only | current | Count of DTUs in the current 24-hr interval that have been retransmitted. |
| 1.3.6.1.4.1.664.5.65.1.3.6 | TableadGenVdsl2VturChanPerfDataTable | not-accessible | current | This table provides one row for each Vtur channel. VDSL2 channel interfaces are those ifEntries where ifType is equal to Interleave(124) or Fast(125). |
| 1.3.6.1.4.1.664.5.65.1.3.6.1 | RowadGenVdsl2VturChanPerfDataEntry | not-accessible | current | An entry in adGenVdsl2VturChanPerfDataTable. |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.1 | ColumnadGenVdsl2VturChanNumber | read-only | current | VDSL2 logical channel. Channel values are 1 - 4. |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.2 | ColumnadGenVdsl2VturChanReceivedBlks | read-only | current | Count of all encoded blocks received on this channel since agent reset. |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.3 | ColumnadGenVdsl2VturChanTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel since agent reset. |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.4 | ColumnadGenVdsl2VturChanCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected since agent reset. These blocks are passed on as good data. |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.5 | ColumnadGenVdsl2VturChanUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors since agent reset. |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.6 | ColumnadGenVdsl2VturChanPerfValidIntervals | read-only | current | The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The valu… |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.7 | ColumnadGenVdsl2VturChanPerfInvalidIntervals | read-only | current | The number of intervals in the range from 0 to the value of adGenVdsl2VturChanPerfValidIntervals for which no data is available. This object will typically be … |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.8 | ColumnadGenVdsl2VturChanPerfCurr15MinTimeElapsed | read-only | current | Total elapsed seconds in this interval. A full interval is 900 seconds. |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.9 | ColumnadGenVdsl2VturChanPerfCurr15MinReceivedBlks | read-only | current | Count of all encoded blocks received on this channel within the current 15 minute interval. |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.10 | ColumnadGenVdsl2VturChanPerfCurr15MinTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel within the current 15 minute interval. |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.11 | ColumnadGenVdsl2VturChanPerfCurr15MinCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected on this channel within the current 15 minute interval. |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.12 | ColumnadGenVdsl2VturChanPerfCurr15MinUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors on this channel within the current 15 minute interval. |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.13 | ColumnadGenVdsl2VturChanPerfCurr1DayTimeElapsed | read-only | current | Number of seconds that have elapsed since the beginning of the current 1-day interval. |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.14 | ColumnadGenVdsl2VturChanPerfCurr1DayReceivedBlks | read-only | current | Count of all encoded blocks received on this channel during the current day as measured by adGenVdsl2VturChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.15 | ColumnadGenVdsl2VturChanPerfCurr1DayTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel during the current day as measured by adGenVdsl2VturChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.16 | ColumnadGenVdsl2VturChanPerfCurr1DayCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected on this channel during the current day as measured by adGenVdsl2VturChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.17 | ColumnadGenVdsl2VturChanPerfCurr1DayUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors on this channel during the current day as measured by adGenVdsl2VturChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.18 | ColumnadGenVdsl2VturChanPerfTcTxUnits | read-only | current | Count of total transmitted transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.19 | ColumnadGenVdsl2VturChanPerfTcTxDataUnits | read-only | current | Count of data carrying transmitted transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.20 | ColumnadGenVdsl2VturChanPerfTcTxDataOctets | read-only | current | Count of octets in data carrying transmitted transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.21 | ColumnadGenVdsl2VturChanPerfTcTxIdleUnits | read-only | current | Count of idle/pause transmitted transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.22 | ColumnadGenVdsl2VturChanPerfTcRxUnits | read-only | current | Count of total transmitted transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.23 | ColumnadGenVdsl2VturChanPerfTcRxDataUnits | read-only | current | Count of data carrying received transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.24 | ColumnadGenVdsl2VturChanPerfTcRxDataOctets | read-only | current | Count of octets in data carrying received transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.25 | ColumnadGenVdsl2VturChanPerfTcRxIdleUnits | read-only | current | Count of idle/pause received transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.26 | ColumnadGenVdsl2VturChanPerfTcRxErroredUnits | read-only | current | Count of errored received transmission convergence layer (TC) cells (ATM framing mode) or packets (other framing modes). |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.27 | ColumnadGenVdsl2VturChanPerfRtxUncorrectedDtu | read-only | current | Count of DTUs since reset that have been detected in error and that have not been corrected by one or more retransmissions within the maximum delay constraint. |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.28 | ColumnadGenVdsl2VturChanPerfRtxCorrectedDtu | read-only | current | Count of DTUs since reset that have been detected in error and that have been successfully corrected by a retransmission within the maximum delay constraint. |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.29 | ColumnadGenVdsl2VturChanPerfRtxRetransmittedDtu | read-only | current | Count of DTUs since reset that have been retransmitted. |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.30 | ColumnadGenVdsl2VturChanPerfCurr15MinRtxUncorrectedDtu | read-only | current | Count of DTUs in the current 15-min interval that have been detected in error and that have not been corrected by one or more retransmissions within the maximu… |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.31 | ColumnadGenVdsl2VturChanPerfCurr15MinRtxCorrectedDtu | read-only | current | Count of DTUs in the current 15-min interval that have been detected in error and that have been successfully corrected by a retransmission within the maximum … |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.32 | ColumnadGenVdsl2VturChanPerfCurr15MinRtxRetransmittedDtu | read-only | current | Count of DTUs in the current 15-min interval that have been retransmitted. |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.33 | ColumnadGenVdsl2VturChanPerfCurr1DayRtxUncorrectedDtu | read-only | current | Count of DTUs in the current 24-hr interval that have been detected in error and that have not been corrected by one or more retransmissions within the maximum… |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.34 | ColumnadGenVdsl2VturChanPerfCurr1DayRtxCorrectedDtu | read-only | current | Count of DTUs in the current 24-hr interval that have been detected in error and that have been successfully corrected by a retransmission within the maximum d… |
| 1.3.6.1.4.1.664.5.65.1.3.6.1.35 | ColumnadGenVdsl2VturChanPerfCurr1DayRtxRetransmittedDtu | read-only | current | Count of DTUs in the current 24-hr interval that have been retransmitted. |
| 1.3.6.1.4.1.664.5.65.1.3.7 | TableadGenVdsl2VtucChanIntervalTable | not-accessible | current | This table provides one row for each Vtuc channel's performance data collection interval. VDSL2 channel interfaces are those ifEntries where ifType is equal to… |
| 1.3.6.1.4.1.664.5.65.1.3.7.1 | RowadGenVdsl2VtucChanIntervalEntry | not-accessible | current | An entry in the adGenVdsl2VtucIntervalTable. |
| 1.3.6.1.4.1.664.5.65.1.3.7.1.1 | ColumnadGenVdsl2VtucChanNum | read-only | current | VDSL2 logical channel. Channel values are 1 - 4. |
| 1.3.6.1.4.1.664.5.65.1.3.7.1.2 | ColumnadGenVdsl2VtucChanIntervalNumber | read-only | current | Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional. |
| 1.3.6.1.4.1.664.5.65.1.3.7.1.3 | ColumnadGenVdsl2VtucChanIntervalReceivedBlks | read-only | current | Count of all encoded blocks received on this channel during this interval. |
| 1.3.6.1.4.1.664.5.65.1.3.7.1.4 | ColumnadGenVdsl2VtucChanIntervalTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel during this interval. |
| 1.3.6.1.4.1.664.5.65.1.3.7.1.5 | ColumnadGenVdsl2VtucChanIntervalCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected on this channel during this interval. |
| 1.3.6.1.4.1.664.5.65.1.3.7.1.6 | ColumnadGenVdsl2VtucChanIntervalUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors on this channel during this interval. |
| 1.3.6.1.4.1.664.5.65.1.3.7.1.7 | ColumnadGenVdsl2VtucChanIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.664.5.65.1.3.7.1.8 | ColumnadGenVdsl2VtucChanIntervalRtxUncorrectedDtu | read-only | current | Count of DTUs in the specified 15-min interval that have been detected in error and that have not been corrected by one or more retransmissions within the maxi… |
| 1.3.6.1.4.1.664.5.65.1.3.7.1.9 | ColumnadGenVdsl2VtucChanIntervalRtxCorrectedDtu | read-only | current | Count of DTUs in the specified 15-min interval that have been detected in error and that have been successfully corrected by a retransmission within the maximu… |
| 1.3.6.1.4.1.664.5.65.1.3.7.1.10 | ColumnadGenVdsl2VtucChanIntervalRtxRetransmittedDtu | read-only | current | Count of DTUs in the specified 15-min interval that have been retransmitted. |
| 1.3.6.1.4.1.664.5.65.1.3.8 | TableadGenVdsl2VturChanIntervalTable | not-accessible | current | This table provides one row for each Vtur channel's performance data collection interval. VDSL2 channel interfaces are those ifEntries where ifType is equal to… |
| 1.3.6.1.4.1.664.5.65.1.3.8.1 | RowadGenVdsl2VturChanIntervalEntry | not-accessible | current | An entry in the adGenVdsl2VturIntervalTable. |
| 1.3.6.1.4.1.664.5.65.1.3.8.1.1 | ColumnadGenVdsl2VturChanNum | read-only | current | VDSL2 logical channel. Channel values are 1 - 4. |
| 1.3.6.1.4.1.664.5.65.1.3.8.1.2 | ColumnadGenVdsl2VturChanIntervalNumber | read-only | current | Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional. |
| 1.3.6.1.4.1.664.5.65.1.3.8.1.3 | ColumnadGenVdsl2VturChanIntervalReceivedBlks | read-only | current | Count of all encoded blocks received on this channel during this interval. |
| 1.3.6.1.4.1.664.5.65.1.3.8.1.4 | ColumnadGenVdsl2VturChanIntervalTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel during this interval. |
| 1.3.6.1.4.1.664.5.65.1.3.8.1.5 | ColumnadGenVdsl2VturChanIntervalCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected on this channel during this interval. |
| 1.3.6.1.4.1.664.5.65.1.3.8.1.6 | ColumnadGenVdsl2VturChanIntervalUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors on this channel during this interval. |
| 1.3.6.1.4.1.664.5.65.1.3.8.1.7 | ColumnadGenVdsl2VturChanIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.664.5.65.1.3.8.1.8 | ColumnadGenVdsl2VturChanIntervalRtxUncorrectedDtu | read-only | current | Count of DTUs in the specified 15-min interval that have been detected in error and that have not been corrected by one or more retransmissions within the maxi… |
| 1.3.6.1.4.1.664.5.65.1.3.8.1.9 | ColumnadGenVdsl2VturChanIntervalRtxCorrectedDtu | read-only | current | Count of DTUs in the specified 15-min interval that have been detected in error and that have been successfully corrected by a retransmission within the maximu… |
| 1.3.6.1.4.1.664.5.65.1.3.8.1.10 | ColumnadGenVdsl2VturChanIntervalRtxRetransmittedDtu | read-only | current | Count of DTUs in the specified 15-min interval that have been retransmitted. |
| 1.3.6.1.4.1.664.5.65.1.3.9 | TableadGenVdsl2Vtuc1DayIntervalTable | not-accessible | current | This table provides one row for each Vtuc performance data collection 1 day interval. VDSL2 physical interfaces are those ifEntries where ifType is equal to vd… |
| 1.3.6.1.4.1.664.5.65.1.3.9.1 | RowadGenVdsl2Vtuc1DayIntervalEntry | not-accessible | current | An entry in the adGenVdsl2Vtuc1DayIntervalTable. |
| 1.3.6.1.4.1.664.5.65.1.3.9.1.1 | ColumnadGenVdsl2Vtuc1DayIntervalNumber | read-only | current | Performance Data Interval number 1 is the the most recent previous 1 day interval; interval 7 is 7 Days ago. Intervals 1..7 are optional. |
| 1.3.6.1.4.1.664.5.65.1.3.9.1.2 | ColumnadGenVdsl2Vtuc1DayIntervalLofs | read-only | current | Count of seconds in the interval when there was Loss of Framing. |
| 1.3.6.1.4.1.664.5.65.1.3.9.1.3 | ColumnadGenVdsl2Vtuc1DayIntervalLoss | read-only | current | Count of seconds in the 1 Day interval when there was Loss of Signal. |
| 1.3.6.1.4.1.664.5.65.1.3.9.1.4 | ColumnadGenVdsl2Vtuc1DayIntervalLols | read-only | current | Count of seconds in the 1 Day interval when there was Loss of Link. |
| 1.3.6.1.4.1.664.5.65.1.3.9.1.5 | ColumnadGenVdsl2Vtuc1DayIntervalLprs | read-only | current | Count of seconds in the 1 Day interval when there was Loss of Power. |
| 1.3.6.1.4.1.664.5.65.1.3.9.1.6 | ColumnadGenVdsl2Vtuc1DayIntervalES | read-only | current | Count of Errored Seconds in the interval. |
| 1.3.6.1.4.1.664.5.65.1.3.9.1.7 | ColumnadGenVdsl2Vtuc1DayIntervalInits | read-only | current | Count of the line initialization attempts during the 1 Day interval. Includes both successful and failed attempts. |
| 1.3.6.1.4.1.664.5.65.1.3.9.1.8 | ColumnadGenVdsl2Vtuc1DayIntervalValidData | read-only | current | This variable indicates if the data for this 1 Day interval is valid. |
| 1.3.6.1.4.1.664.5.65.1.3.9.1.9 | ColumnadGenVdsl2Vtuc1DayIntervalSES | read-only | current | Count of Severely Errored Seconds in the 1 Day interval. |
| 1.3.6.1.4.1.664.5.65.1.3.9.1.10 | ColumnadGenVdsl2Vtuc1DayIntervalUAS | read-only | current | Count of Unavailable Seconds in the 1 Day interval. |
| 1.3.6.1.4.1.664.5.65.1.3.9.1.11 | ColumnadGenVdsl2Vtuc1DayIntervalFECs | read-only | current | Count of seconds in the interval during which at least one forward error correction event took place. |
| 1.3.6.1.4.1.664.5.65.1.3.9.1.12 | ColumnadGenVdsl2Vtuc1DayIntervalFEC | read-only | current | Count of forward error correction events that took place in the 1 Day interval. |
| 1.3.6.1.4.1.664.5.65.1.3.9.1.13 | ColumnadGenVdsl2Vtuc1DayIntervalCRC | read-only | current | Count of CRC anomolies that took place in the 1 Day interval. |
| 1.3.6.1.4.1.664.5.65.1.3.9.1.14 | ColumnadGenVdsl2Vtuc1DayIntervalSraDownshifts | read-only | current | Count of SRA payload rate downshifts since last successful train in the specified 24-hr interval |
| 1.3.6.1.4.1.664.5.65.1.3.9.1.15 | ColumnadGenVdsl2Vtuc1DayIntervalSraUpshifts | read-only | current | Count of SRA payload rate upshifts since last successful train in the specified 24-hr interval |
| 1.3.6.1.4.1.664.5.65.1.3.9.1.16 | ColumnadGenVdsl2Vtuc1DayIntervalSraRateMax | read-only | current | Max payload rate in the specified 24-hr interval since last successful train. |
| 1.3.6.1.4.1.664.5.65.1.3.9.1.17 | ColumnadGenVdsl2Vtuc1DayIntervalSraRateMin | read-only | current | Min payload rate in the specified 24-hr interval since last successful train. |
| 1.3.6.1.4.1.664.5.65.1.3.9.1.18 | ColumnadGenVdsl2Vtuc1DayIntervalRtxMinEftr | read-only | current | Retransmission parameter defined as the minimum of the error-free throughput rate observed in the specified 24-hr interval. |
| 1.3.6.1.4.1.664.5.65.1.3.9.1.19 | ColumnadGenVdsl2Vtuc1DayIntervalRtxLeftrs | read-only | current | Count of low error-free throughput rate defect seconds in the specified 24-hr interval. |
| 1.3.6.1.4.1.664.5.65.1.3.10 | TableadGenVdsl2Vtur1DayIntervalTable | not-accessible | current | This table provides one row for each Vtur performance data collection 1 Day interval. VDSL2 physical interfaces are those ifEntries where ifType is equal to vd… |
| 1.3.6.1.4.1.664.5.65.1.3.10.1 | RowadGenVdsl2Vtur1DayIntervalEntry | not-accessible | current | An entry in the adGenVdsl2Vtur1DayIntervalTable. |
| 1.3.6.1.4.1.664.5.65.1.3.10.1.1 | ColumnadGenVdsl2Vtur1DayIntervalNumber | read-only | current | Performance Data Interval number 1 is the the most recent previous 1 day interval; interval 7 is 7 Days ago. Intervals 1..7 are optional. |
| 1.3.6.1.4.1.664.5.65.1.3.10.1.2 | ColumnadGenVdsl2Vtur1DayIntervalLofs | read-only | current | Count of seconds in the 1 Day interval when there was Loss of Framing. |
| 1.3.6.1.4.1.664.5.65.1.3.10.1.3 | ColumnadGenVdsl2Vtur1DayIntervalLoss | read-only | current | Count of seconds in the 1 Day interval when there was Loss of Signal. |
| 1.3.6.1.4.1.664.5.65.1.3.10.1.4 | ColumnadGenVdsl2Vtur1DayIntervalLprs | read-only | current | Count of seconds in the 1 Day interval when there was Loss of Power. |
| 1.3.6.1.4.1.664.5.65.1.3.10.1.5 | ColumnadGenVdsl2Vtur1DayIntervalES | read-only | current | Count of Errored Seconds in the 1 Day interval. |
| 1.3.6.1.4.1.664.5.65.1.3.10.1.6 | ColumnadGenVdsl2Vtur1DayIntervalValidData | read-only | current | This variable indicates if the data for this 1 Day interval is valid. |
| 1.3.6.1.4.1.664.5.65.1.3.10.1.7 | ColumnadGenVdsl2Vtur1DayIntervalSES | read-only | current | Count of Severely Errored Seconds in the 1 Day interval. |
| 1.3.6.1.4.1.664.5.65.1.3.10.1.8 | ColumnadGenVdsl2Vtur1DayIntervalUAS | read-only | current | Count of Unavailable Seconds in the 1 Day interval. |
| 1.3.6.1.4.1.664.5.65.1.3.10.1.9 | ColumnadGenVdsl2Vtur1DayIntervalFECs | read-only | current | Count of seconds in the 1 Day interval during which at least one forward error correction event took place. |
| 1.3.6.1.4.1.664.5.65.1.3.10.1.10 | ColumnadGenVdsl2Vtur1DayIntervalFEC | read-only | current | Count of forward error correction events that took place in the 1 Day interval. |
| 1.3.6.1.4.1.664.5.65.1.3.10.1.11 | ColumnadGenVdsl2Vtur1DayIntervalCRC | read-only | current | Count of CRC anomolies that took place in the 1 Day interval. |
| 1.3.6.1.4.1.664.5.65.1.3.10.1.12 | ColumnadGenVdsl2Vtur1DayIntervalSraDownshifts | read-only | current | Count of SRA payload rate downshifts since last successful train in the specified 24-hr interval |
| 1.3.6.1.4.1.664.5.65.1.3.10.1.13 | ColumnadGenVdsl2Vtur1DayIntervalSraUpshifts | read-only | current | Count of SRA payload rate upshifts since last successful train in the specified 24-hr interval |
| 1.3.6.1.4.1.664.5.65.1.3.10.1.14 | ColumnadGenVdsl2Vtur1DayIntervalSraRateMax | read-only | current | Max payload rate in the specified 24-hr interval since last successful train. |
| 1.3.6.1.4.1.664.5.65.1.3.10.1.15 | ColumnadGenVdsl2Vtur1DayIntervalSraRateMin | read-only | current | Min payload rate in the specified 24-hr interval since last successful train. |
| 1.3.6.1.4.1.664.5.65.1.3.10.1.16 | ColumnadGenVdsl2Vtur1DayIntervalRtxMinEftr | read-only | current | Retransmission parameter defined as the minimum of the error-free throughput rate observed in the specified 24-hr interval. |
| 1.3.6.1.4.1.664.5.65.1.3.10.1.17 | ColumnadGenVdsl2Vtur1DayIntervalRtxLeftrs | read-only | current | Count of low error-free throughput rate defect seconds in the specified 24-hr interval. |
| 1.3.6.1.4.1.664.5.65.1.3.11 | TableadGenVdsl2VtucChan1DayIntervalTable | not-accessible | current | This table provides one row for each Vtuc channel's performance data daily collection intervals. VDSL2 channel interfaces are those ifEntries where ifType is e… |
| 1.3.6.1.4.1.664.5.65.1.3.11.1 | RowadGenVdsl2VtucChan1DayIntervalEntry | not-accessible | current | An entry in the adGenVdsl2Vtuc1DayIntervalTable. |
| 1.3.6.1.4.1.664.5.65.1.3.11.1.1 | ColumnadGenVdsl2Vtuc1DayChanNum | read-only | current | VDSL2 logical channel. Channel values are 1 - 4. |
| 1.3.6.1.4.1.664.5.65.1.3.11.1.2 | ColumnadGenVdsl2VtucChan1DayIntervalNumber | read-only | current | Performance Data Interval number 1 is the the most recent previous interval; interval 7 is 1 week ago. Intervals 2..7 are optional. |
| 1.3.6.1.4.1.664.5.65.1.3.11.1.3 | ColumnadGenVdsl2VtucChan1DayIntervalReceivedBlks | read-only | current | Count of all encoded blocks received on this channel during this interval. |
| 1.3.6.1.4.1.664.5.65.1.3.11.1.4 | ColumnadGenVdsl2VtucChan1DayIntervalTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel during this interval. |
| 1.3.6.1.4.1.664.5.65.1.3.11.1.5 | ColumnadGenVdsl2VtucChan1DayIntervalCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected on this channel during this interval. |
| 1.3.6.1.4.1.664.5.65.1.3.11.1.6 | ColumnadGenVdsl2VtucChan1DayIntervalUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors on this channel during this interval. |
| 1.3.6.1.4.1.664.5.65.1.3.11.1.7 | ColumnadGenVdsl2VtucChan1DayIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.664.5.65.1.3.11.1.8 | ColumnadGenVdsl2VtucChan1DayIntervalRtxUncorrectedDtu | read-only | current | Count of DTUs in the specified 24-hr interval that have been detected in error and that have not been corrected by one or more retransmissions within the maxim… |
| 1.3.6.1.4.1.664.5.65.1.3.11.1.9 | ColumnadGenVdsl2VtucChan1DayIntervalRtxCorrectedDtu | read-only | current | Count of DTUs in the specified 24-hr interval that have been detected in error and that have been successfully corrected by a retransmission within the maximum… |
| 1.3.6.1.4.1.664.5.65.1.3.11.1.10 | ColumnadGenVdsl2VtucChan1DayIntervalRtxRetransmittedDtu | read-only | current | Count of DTUs in the specified 24-hr interval that have been retransmitted. |
| 1.3.6.1.4.1.664.5.65.1.3.12 | TableadGenVdsl2VturChan1DayIntervalTable | not-accessible | current | This table provides one row for each Vtur channel's performance data daily collection interval. VDSL2 channel interfaces are those ifEntries where ifType is eq… |
| 1.3.6.1.4.1.664.5.65.1.3.12.1 | RowadGenVdsl2VturChan1DayIntervalEntry | not-accessible | current | An entry in the adGenVdsl2Vtur1DayIntervalTable. |
| 1.3.6.1.4.1.664.5.65.1.3.12.1.1 | ColumnadGenVdsl2Vtur1DayChanNum | read-only | current | VDSL2 logical channel. Channel values are 1 - 4. |
| 1.3.6.1.4.1.664.5.65.1.3.12.1.2 | ColumnadGenVdsl2VturChan1DayIntervalNumber | read-only | current | Performance Data Interval number 1 is the the most recent previous interval; interval 7 is 1 week ago. Intervals 2..7 are optional. |
| 1.3.6.1.4.1.664.5.65.1.3.12.1.3 | ColumnadGenVdsl2VturChan1DayIntervalReceivedBlks | read-only | current | Count of all encoded blocks received on this channel during this interval. |
| 1.3.6.1.4.1.664.5.65.1.3.12.1.4 | ColumnadGenVdsl2VturChan1DayIntervalTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel during this interval. |
| 1.3.6.1.4.1.664.5.65.1.3.12.1.5 | ColumnadGenVdsl2VturChan1DayIntervalCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected on this channel during this interval. |
| 1.3.6.1.4.1.664.5.65.1.3.12.1.6 | ColumnadGenVdsl2VturChan1DayIntervalUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors on this channel during this interval. |
| 1.3.6.1.4.1.664.5.65.1.3.12.1.7 | ColumnadGenVdsl2VturChan1DayIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.664.5.65.1.3.12.1.8 | ColumnadGenVdsl2VturChan1DayIntervalRtxUncorrectedDtu | read-only | current | Count of DTUs in the specified 24-hr interval that have been detected in error and that have not been corrected by one or more retransmissions within the maxim… |
| 1.3.6.1.4.1.664.5.65.1.3.12.1.9 | ColumnadGenVdsl2VturChan1DayIntervalRtxCorrectedDtu | read-only | current | Count of DTUs in the specified 24-hr interval that have been detected in error and that have been successfully corrected by a retransmission within the maximum… |
| 1.3.6.1.4.1.664.5.65.1.3.12.1.10 | ColumnadGenVdsl2VturChan1DayIntervalRtxRetransmittedDtu | read-only | current | Count of DTUs in the specified 24-hr interval that have been retransmitted. |
| 1.3.6.1.4.1.664.5.65.1.4 | NodeadGenVdsl2Traps | |||
| 1.3.6.1.4.1.664.5.65.1.4.1 | NodeadGenVdsl2VtucTrapPrefix | |||
| 1.3.6.1.4.1.664.5.65.1.4.1.0 | NodeadGenVdsl2VtucTraps | |||
| 1.3.6.1.4.1.664.5.65.1.4.1.0.1 | NotificationadGenVdsl2VtucSnrMgnThreshTrap | current | SNR Margin threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.1.0.2 | NotificationadGenVdsl2VtucLofsThreshTrap | current | Loss of Framing 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.1.0.3 | NotificationadGenVdsl2VtucLossThreshTrap | current | Loss of Signal 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.1.0.4 | NotificationadGenVdsl2VtucLolsThreshTrap | current | Lols of Signal 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.1.0.5 | NotificationadGenVdsl2VtucLprsThreshTrap | current | Loss of Power 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.1.0.6 | NotificationadGenVdsl2VtucESThreshTrap | current | Errored Second 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.1.0.7 | NotificationadGenVdsl2VtucSESThreshTrap | current | Severely Errored Second 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.1.0.8 | NotificationadGenVdsl2VtucUASThreshTrap | current | Unavailable Second 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.2 | NodeadGenVdsl2VturTrapPrefix | |||
| 1.3.6.1.4.1.664.5.65.1.4.2.0 | NodeadGenVdsl2VturTraps | |||
| 1.3.6.1.4.1.664.5.65.1.4.2.0.1 | NotificationadGenVdsl2VturSnrMgnThreshTrap | current | SNR threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.2.0.2 | NotificationadGenVdsl2VturLofsThreshTrap | current | Loss of Framing 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.2.0.3 | NotificationadGenVdsl2VturLossThreshTrap | current | Loss of Signal 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.2.0.4 | NotificationadGenVdsl2VturLprsThreshTrap | current | Loss of Power 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.2.0.5 | NotificationadGenVdsl2VturESThreshTrap | current | Errored Second 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.2.0.6 | NotificationadGenVdsl2VturSESThreshTrap | current | Severely Errored Second 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.2.0.7 | NotificationadGenVdsl2VturUASThreshTrap | current | Unavailable Second 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.3 | NodeadGenVdsl2VtucTrapPrefixRemote | |||
| 1.3.6.1.4.1.664.5.65.1.4.3.0 | NodeadGenVdsl2VtucRemoteTraps | |||
| 1.3.6.1.4.1.664.5.65.1.4.3.0.1 | NotificationadGenVdsl2VtucSnrMgnRemoteThreshTrap | current | SNR Margin threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.3.0.2 | NotificationadGenVdsl2VtucLofsRemoteThreshTrap | current | Loss of Framing 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.3.0.3 | NotificationadGenVdsl2VtucLossRemoteThreshTrap | current | Loss of Signal 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.3.0.4 | NotificationadGenVdsl2VtucLolsRemoteThreshTrap | current | Lols of Signal 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.3.0.5 | NotificationadGenVdsl2VtucLprsRemoteThreshTrap | current | Loss of Power 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.3.0.6 | NotificationadGenVdsl2VtucESRemoteThreshTrap | current | Errored Second 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.3.0.7 | NotificationadGenVdsl2VtucSESRemoteThreshTrap | current | Severely Errored Second 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.3.0.8 | NotificationadGenVdsl2VtucUASRemoteThreshTrap | current | Unavailable Second 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.4 | NodeadGenVdsl2VturTrapPrefixRemote | |||
| 1.3.6.1.4.1.664.5.65.1.4.4.0 | NodeadGenVdsl2VturRemoteTraps | |||
| 1.3.6.1.4.1.664.5.65.1.4.4.0.1 | NotificationadGenVdsl2VturSnrMgnRemoteThreshTrap | current | SNR threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.4.0.2 | NotificationadGenVdsl2VturLofsRemoteThreshTrap | current | Loss of Framing 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.4.0.3 | NotificationadGenVdsl2VturLossRemoteThreshTrap | current | Loss of Signal 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.4.0.4 | NotificationadGenVdsl2VturLprsRemoteThreshTrap | current | Loss of Power 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.4.0.5 | NotificationadGenVdsl2VturESRemoteThreshTrap | current | Errored Second 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.4.0.6 | NotificationadGenVdsl2VturSESRemoteThreshTrap | current | Severely Errored Second 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.4.4.0.7 | NotificationadGenVdsl2VturUASRemoteThreshTrap | current | Unavailable Second 15-minute interval threshold reached. | |
| 1.3.6.1.4.1.664.5.65.1.5 | NodeadGenVdsl2ExtConfig | |||
| 1.3.6.1.4.1.664.5.65.1.5.1 | TableadGenVdsl2ConfProfileExtTable | not-accessible | current | This table contains VDSL management profile configuration information not defined in the adGenVdsl2LineConfProfileTable from the VDSL-LINE-MIB. |
| 1.3.6.1.4.1.664.5.65.1.5.1.1 | RowadGenVdsl2ConfProfileExtEntry | not-accessible | current | An entry extends the adslLineConfProfileEntry defined in VDSL-LINE-MIB. Each entry corresponds to an VDSL line profile. |
| 1.3.6.1.4.1.664.5.65.1.5.1.1.1 | ColumnadGenVdsl2LineManagementProfileNameApplied | read-write | current | Management profile name applied to the VDSL Port profile. |
| 1.3.6.1.4.1.664.5.65.1.5.1.1.2 | ColumnadGenVdsl2LineManagementProfileIndexApplied | read-write | current | Management profile name applied to the VDSL Port profile. |
| 1.3.6.1.4.1.664.5.65.1.5.1.1.3 | ColumnadGenVdsl2LineCircuitID | read-write | current | Circuit ID assigned to VDSL Port. |
| 1.3.6.1.4.1.664.5.65.1.5.1.1.4 | ColumnadGenVdsl2LineResetCounters | read-write | current | Selection of counter types to reset/clear for the indexed interface. The counter types are performance monitoring intervals (PM history) which typically consis… |
| 1.3.6.1.4.1.664.5.65.1.5.1.1.5 | ColumnadGenVdsl2LineRetrainRequest | read-write | current | Request the selected line to perform a full retrain/init or a fast retrain/init. A read will always return full(1). |
| 1.3.6.1.4.1.664.5.65.1.6 | NodeadGenVdsl2Test | |||
| 1.3.6.1.4.1.664.5.65.1.7 | NodeadGenVdsl2MibConformance | |||
| 1.3.6.1.4.1.664.5.65.1.7.1 | NodeadGenVdsl2MibGroups | |||
| 1.3.6.1.4.1.664.5.65.1.7.1.1 | GroupadGenVdsl2ProvGroup | current | These objects provide support for Vdsl2 configuration. | |
| 1.3.6.1.4.1.664.5.65.1.7.1.2 | GroupadGenVdsl2StatusGroup | current | These objects provide support for the reporting of status of Vdsl2 physical interfaces, channel, band, and subcarrier. | |
| 1.3.6.1.4.1.664.5.65.1.7.1.3 | GroupadGenVdsl2PMGroup | current | These objects provide support for the reporting of the Vdsl2 interface PM data. | |
| 1.3.6.1.4.1.664.5.65.1.7.1.4 | GroupadGenVdsl2TrapsGroup | current | These objects provide support for the reporting of the traps from the Vdsl2 interfaces. | |
| 1.3.6.1.4.1.664.5.65.1.7.1.5 | GroupadGenVdsl2ExtConfigGroup | current | These objects provide support for Vdsl2 extended profile configuration. | |
| 1.3.6.1.4.1.664.6.10000.65.1.1 | IdentityadGenVdsl2MIB | This MIB defines the objects for the VDSL2 MIB. |