MIB Viewer

adtran/ADTRAN-GENVOIP-MIB

224 objects
This MIB defines the objects for VoIP management.
Imported Objects
ADTRAN-SHARED-CND-SYSTEM-MIB MISSINGadGenVoip adGenVoipID
IF-MIBifIndex InterfaceIndexOrZero
SNMPv2-SMIInteger32 MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCDisplayString RowStatus TEXTUAL-CONVENTION TruthValue
OIDNameAccessStatusDescription
1.3.6.1.4.1.664.5.70.20.1NodeadGenVoipProvisioning
1.3.6.1.4.1.664.5.70.20.1.1NodeadGenVoipTrunkProv
1.3.6.1.4.1.664.5.70.20.1.1.1TableadGenVoipTrunkProvTablenot-accessiblecurrentThis table supports provisioning of generic VoIP trunk parameters. It is intended to be used in conjunction with a specific trunk type, such as a SIP trunk. Th…
1.3.6.1.4.1.664.5.70.20.1.1.1.1RowadGenVoipTrunkProvEntrynot-accessiblecurrentAn entry in the adGenVoipTrunkProvTable.
1.3.6.1.4.1.664.5.70.20.1.1.1.1.1ColumnadGenVoipTrunkEntryIndexnot-accessiblecurrentThe name of the VoIP trunk.
1.3.6.1.4.1.664.5.70.20.1.1.1.1.2ColumnadGenVoipTrunkTransferread-createcurrentUsed to set handling of unattended transfers. 1 = blind Converts unattended transfer attempts to RFC 3891-compliant blind transfers. 2 = unattended Unattended …
1.3.6.1.4.1.664.5.70.20.1.2NodeadGenVoipDialPlanProv
1.3.6.1.4.1.664.5.70.20.1.2.1ScalaradGenVoipDialPlanProvCurrentNumberread-onlycurrentCurrent number of VoIP Dial Plan patterns defined.
1.3.6.1.4.1.664.5.70.20.1.2.2ScalaradGenVoipDialPlanProvLastCreateErrorread-onlycurrentThe reason for the last error that occurred while attempting to create an entry in the VoIP Dial Plan provisioning table (adGenVoipDialPlanProvTable).
1.3.6.1.4.1.664.5.70.20.1.2.3TableadGenVoipDialPlanProvTablenot-accessiblecurrentThis table supports provisioning of dial plan parameters for the VoIP call privilege mechanism.
1.3.6.1.4.1.664.5.70.20.1.2.3.1RowadGenVoipDialPlanProvEntrynot-accessiblecurrentAn entry in the adGenVoipDialPlanProvTable.
1.3.6.1.4.1.664.5.70.20.1.2.3.1.1ColumnadGenVoipDialPlanPatternEntryIndexnot-accessiblecurrentThe dial plan table index. This must be in the form of a phone number or dialing pattern containing wildcards. Available wildcards for this index are: N=2-9, M…
1.3.6.1.4.1.664.5.70.20.1.2.3.1.2ColumnadGenVoipDialPlanRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table. Use createAndWait to add an entry, then set the all variables for the entry, t…
1.3.6.1.4.1.664.5.70.20.1.2.3.1.3ColumnadGenVoipDialPlanLastErrorStringread-onlycurrentThe reason for the last error that occurred while attempting to create an entry in the VoIP dial plan Table.
1.3.6.1.4.1.664.5.70.20.1.2.3.1.4ColumnadGenVoipDialPlanTyperead-createcurrentEnumerated value indicating which call class this particular dial plan entry is associated with. This object is mandatory for row activation.
1.3.6.1.4.1.664.5.70.20.1.2.3.1.5ColumnadGenVoipDialPlanEmergencyNumberread-createcurrentIdentify this plan as being for emergency calls.
1.3.6.1.4.1.664.5.70.20.1.2.3.1.6ColumnadGenVoipDialPlanExternalLineCoderead-createcurrentSpecify the matching behavior of this dial plan in the presence or absence of a matched external line code. A value of 'Prohibited' indicates that this dial pl…
1.3.6.1.4.1.664.5.70.20.1.3NodeadGenVoipSPREPatternProv
1.3.6.1.4.1.664.5.70.20.1.3.1ScalaradGenVoipSPREPatternProvCurrentNumberread-onlycurrentCurrent number of VoIP SPRE codes defined.
1.3.6.1.4.1.664.5.70.20.1.3.2ScalaradGenVoipSPREPatternProvLastCreateErrorread-onlycurrentThe reason for the last error that occurred while attempting to create an entry in the VoIP SPRE pattern provisioning table (adGenVoipSPREPatternProvTable).
1.3.6.1.4.1.664.5.70.20.1.3.3TableadGenVoipSPREPatternProvTablenot-accessiblecurrentThis table supports provisioning of SPRE pattern parameters.
1.3.6.1.4.1.664.5.70.20.1.3.3.1RowadGenVoipSPREPatternProvEntrynot-accessiblecurrentAn entry in the adGenVoipSPREPatternProvTable.
1.3.6.1.4.1.664.5.70.20.1.3.3.1.1ColumnadGenVoipSPREPatternEntryIndexnot-accessiblecurrentThe SPRE Pattern table index. This must be in the form of a SPRE code or dialing pattern containing wildcards. Available wildcards for this index are: N=2-9, M…
1.3.6.1.4.1.664.5.70.20.1.3.3.1.2ColumnadGenVoipSPREPatternRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table. Use createAndWait to add an entry, set the available paramaters, then activate…
1.3.6.1.4.1.664.5.70.20.1.3.3.1.3ColumnadGenVoipSPREPatternLastErrorStringread-onlycurrentThe reason for the last error that occurred while attempting to create an entry in the VoIP SPRE pattern Table.
1.3.6.1.4.1.664.5.70.20.1.3.3.1.4ColumnadGenVoipSPREPatternToneread-createcurrentSpecify the tone to play back when this SPRE tone is matched. NOTE: If the last character of the SPRE code is not a '&' or a '$' this oid will fail when attemp…
1.3.6.1.4.1.664.5.70.20.1.4NodeadGenVoipCallServiceClassProv
1.3.6.1.4.1.664.5.70.20.1.4.1ScalaradGenVoipCallServiceClassProvCurrentNumberread-onlycurrentCurrent number of VoIP Call Class of Service permission sets.
1.3.6.1.4.1.664.5.70.20.1.4.2ScalaradGenVoipCallServiceClassProvLastCreateErrorread-onlycurrentThe reason for the last error that occurred while attempting to create an entry in the VoIP Call Class of Service provisioning table (adGenVoipCallServiceClass…
1.3.6.1.4.1.664.5.70.20.1.4.3TableadGenVoipCallServiceClassProvTablenot-accessiblecurrentThis table supports provisioning of call privilege parameters for the VoIP call service class mechanism.
1.3.6.1.4.1.664.5.70.20.1.4.3.1RowadGenVoipCallServiceClassProvEntrynot-accessiblecurrentAn entry in the adGenVoipCallServiceClassProvTable.
1.3.6.1.4.1.664.5.70.20.1.4.3.1.1ColumnadGenVoipCallServiceClassEntryIndexnot-accessiblecurrentThe name for the call class table instance.
1.3.6.1.4.1.664.5.70.20.1.4.3.1.2ColumnadGenVoipCallServiceClassRowStatusread-createcurrentThis object is used to create a new row or modify or delete an existing row in this table.
1.3.6.1.4.1.664.5.70.20.1.4.3.1.3ColumnadGenVoipCallServiceClassLastErrorStringread-createcurrentThe reason for the last error that occurred while attempting to create an entry in the VoIP service class Table.
1.3.6.1.4.1.664.5.70.20.1.4.3.1.4ColumnadGenVoipCallServiceClass900Numberread-createcurrentPermit 900 number calling.
1.3.6.1.4.1.664.5.70.20.1.4.3.1.5ColumnadGenVoipCallServiceClassExtensionsread-createcurrentPermit extension number calling.
1.3.6.1.4.1.664.5.70.20.1.4.3.1.6ColumnadGenVoipCallServiceClassInternationalread-createcurrentPermit international number calling.
1.3.6.1.4.1.664.5.70.20.1.4.3.1.7ColumnadGenVoipCallServiceClassLocalread-createcurrentPermit local number calling.
1.3.6.1.4.1.664.5.70.20.1.4.3.1.8ColumnadGenVoipCallServiceClassNationalread-createcurrentPermit national (long distance) number calling.
1.3.6.1.4.1.664.5.70.20.1.4.3.1.9ColumnadGenVoipCallServiceClassOperatorAssistedread-createcurrentPermit operator assisted number calling.
1.3.6.1.4.1.664.5.70.20.1.4.3.1.10ColumnadGenVoipCallServiceClassSpecifyCarrierread-createcurrentPermit specify carrier calling.
1.3.6.1.4.1.664.5.70.20.1.4.3.1.11ColumnadGenVoipCallServiceClassTollFreeread-createcurrentPermit toll free number calling.
1.3.6.1.4.1.664.5.70.20.1.4.3.1.12ColumnadGenVoipCallServiceClassUser1read-createcurrentPermit user defined 1 number calling.
1.3.6.1.4.1.664.5.70.20.1.4.3.1.13ColumnadGenVoipCallServiceClassUser2read-createcurrentPermit user defined 2 number calling.
1.3.6.1.4.1.664.5.70.20.1.4.3.1.14ColumnadGenVoipCallServiceClassUser3read-createcurrentPermit user defined 3 number calling.
1.3.6.1.4.1.664.5.70.20.1.4.3.1.15ColumnadGenVoipCallServiceConferenceread-createcurrentPermit user to initiate 3-way conference. Default: Enable
1.3.6.1.4.1.664.5.70.20.1.4.3.1.16ColumnadGenVoipCallServiceDisableCallWaitingread-createcurrentPermit disabling of call-waiting feature for user. Default: Disable
1.3.6.1.4.1.664.5.70.20.1.5NodeadGenVoipUserProv
1.3.6.1.4.1.664.5.70.20.1.5.1ScalaradGenVoipUserProvCurrentNumberread-onlycurrentCurrent number of VoIP users.
1.3.6.1.4.1.664.5.70.20.1.5.2ScalaradGenVoipUserProvLastCreateErrorread-onlycurrentThe reason for the last error that occurred while attempting to create an entry in the VoIP user provisioning table (adGenVoipUserProvTable).
1.3.6.1.4.1.664.5.70.20.1.5.3TableadGenVoipUserProvTablenot-accessiblecurrentThis table supports provisioning of SIP user parameters for the SIP client.
1.3.6.1.4.1.664.5.70.20.1.5.3.1RowadGenVoipUserProvEntrynot-accessiblecurrentAn entry in the adGenVoipUserProvTable.
1.3.6.1.4.1.664.5.70.20.1.5.3.1.1ColumnadGenVoipUserEntryIndexnot-accessiblecurrentThe VoIP user index.
1.3.6.1.4.1.664.5.70.20.1.5.3.1.2ColumnadGenVoipUserRowStatusread-createcurrentThis object is used to create a new row or modify or delete an existing row in this table.
1.3.6.1.4.1.664.5.70.20.1.5.3.1.3ColumnadGenVoipUserLastErrorStringread-onlycurrentThe reason for the last error that occurred while attempting to create an entry in the VoIP UserProv Table.
1.3.6.1.4.1.664.5.70.20.1.5.3.1.4ColumnadGenVoipUserFxsPortread-createcurrentThe ifIndex of the FXS port associated with this user. For the Adtran VoIP implementation each user can have only a single physical appearance. To 'disconnect'…
1.3.6.1.4.1.664.5.70.20.1.5.3.1.5ColumnadGenVoipUserCallClassread-createcurrentThe index of the call privilege class associated with the user. This should be identical to the 'adGenVoipCallServiceClassEntryIndex' index of the adGenVoipCal…
1.3.6.1.4.1.664.5.70.20.1.5.3.1.6ColumnadGenVoipUserCallWaitingread-createcurrentPermits enabling or disabling of call-waiting feature for the user. Permitted values: Call-waiting Enabled for user = True(1), Call-waiting Disabled for user =…
1.3.6.1.4.1.664.5.70.20.1.5.3.1.7ColumnadGenVoipUserDialingProfileread-createcurrentAllows for the provisioning and viewing of the configured dialing profile for this user. This provisions which dial plans, SPRE codes, and external line codes …
1.3.6.1.4.1.664.5.70.20.1.5.3.1.8ColumnadGenVoipUserHotlineEnabledread-createcurrentEnable or disable hotline (PLAR) functionality for the user. Hotline cannot be enabled if warmline is enabled. Permitted values: True(1) or False(2). Default V…
1.3.6.1.4.1.664.5.70.20.1.5.3.1.9ColumnadGenVoipUserHotlineNumberread-createcurrentA string indicating the number to be dialed upon off-hook detection when adGenVoipUserHotlineEnabled is True. Any string containing the characters 1-9, #, and …
1.3.6.1.4.1.664.5.70.20.1.5.3.1.10ColumnadGenVoipUserSipTrunkManualSelectread-createcurrentA string indicating the sip trunk to be used for this voice user. If this value is blank, then the voice user will use the default sip-trunk specified by adGen…
1.3.6.1.4.1.664.5.70.20.1.5.3.1.11ColumnadGenVoipUserWarmlineEnabledread-createcurrentEnable or disable warmline (Delayed PLAR) functionality for the user. Warmline cannot be enabled if hotline is enabled. Permitted values: True(1) or False(2). …
1.3.6.1.4.1.664.5.70.20.1.5.3.1.12ColumnadGenVoipUserWarmlineNumberread-createcurrentA string indicating the number to be dialed after a delay upon off-hook detection when adGenVoipUserWarmlineEnabled is True. Any string containing the characte…
1.3.6.1.4.1.664.5.70.20.1.5.3.1.13ColumnadGenVoipUserWarmlineDelayread-createcurrentA integer indicating the period in seconds to wait before dialing the warmline number specified by adGenVoipUserWarmlineNumber.
1.3.6.1.4.1.664.5.70.20.1.5.4ScalaradGenVoipUserProvBulkInstanceread-onlycurrentA get on this OID returns a TLV index that is used as a adTa5kTlvInstance index in adTa5kTlvBulk to retrieve a TLV containing all voice users.
1.3.6.1.4.1.664.5.70.20.1.6NodeadGenVoipScalarProv
1.3.6.1.4.1.664.5.70.20.1.6.1ScalaradGenVoipScalarFlashhookModeread-writecurrentUsed to determine if flashhook events will be interpreted locally or will be forwarded to the far end. 1 = interpreted Allows the local unit to interpret flash…
1.3.6.1.4.1.664.5.70.20.1.6.2ScalaradGenVoipScalarConferenceModeread-writecurrentUsed to determine if three way voice conferencing bridging will be handled within the unit or from a far-end conferencing server. 1 = network Conferencing will…
1.3.6.1.4.1.664.5.70.20.1.6.3ScalaradGenVoipScalarConfLocalOriginatorFlashhookread-writecurrentSpecifies the behavior of a three-way conference originator when a flashook is received after the conference has been established. 1 = drop The last party adde…
1.3.6.1.4.1.664.5.70.20.1.6.4ScalaradGenVoipScalarConfLocalOriginatorOnhookread-writecurrentSpecifies the behavior of a three-way conference originator when the port returns on-hook after the conference has been established. 1 = persist The two remain…
1.3.6.1.4.1.664.5.70.20.1.6.5ScalaradGenVoipScalarConfLocalPartyDisconnectread-writecurrentSpecifies the behavior of a three-way conference after a member disconnects. 1 = continue The conference is maintained with the remaining parties. 2 = transfer…
1.3.6.1.4.1.664.5.70.20.1.6.6ScalaradGenVoipScalarRtpUdpOffsetread-writecurrentUsed to configure a global starting User Datagram Protocol (UDP) port for Realtime Transport Protocol (RTP).
1.3.6.1.4.1.664.5.70.20.1.6.7ScalaradGenVoipScalarSPREModeread-writecurrentUsed to determine if the SPRE code will be interpreted locally or sent to the far end for interpretation. 1 = network SPRE code will be interpreted by the far-…
1.3.6.1.4.1.664.5.70.20.1.6.8ScalaradGenVoipScalarInterdigitTimerread-writecurrentUsed to set the maximum interval between two consecutive digits dialled by the user in seconds. Default: 4 seconds.
1.3.6.1.4.1.664.5.70.20.1.6.9ScalaradGenVoipScalarAlertingTimerread-writecurrentUsed to set the maximum interval a phone can be set in the ringing state in minutes. Default: 0 minute - will continue ringing indefinitely.
1.3.6.1.4.1.664.5.70.20.1.6.10ScalaradGenVoipScalarTransferOnHangupread-writecurrentPermit Call Transfer on hangup. Default: Enable
1.3.6.1.4.1.664.5.70.20.1.6.11ScalaradGenVoipScalarFlashhookThreholdMinread-writecurrentSpecifies Minimum Flashhook time in Milliseconds. Default: 300 Milliseconds.
1.3.6.1.4.1.664.5.70.20.1.6.12ScalaradGenVoipScalarFlashhookThreholdMaxread-writecurrentSpecifies Maximum Flashhook time in Milliseconds. Default: 1000 Milliseconds.
1.3.6.1.4.1.664.5.70.20.1.6.13ScalaradGenVoipScalarEmergencyNumberInhibitOnHookread-writecurrentPermits enabling or disabling of the ability to go on-hook when connected to an emergency number. Permitted values: Inhibit on-hook for users = True(1), Allow …
1.3.6.1.4.1.664.5.70.20.1.6.14ScalaradGenVoipScalarEmergencyNumberRingingTimemoutread-writecurrentUsed to set the maximum interval of time in minutes the phone of the user will ring after hanging up on the emergency call handler. Default: 10 minutes.
1.3.6.1.4.1.664.5.70.20.1.6.15ScalaradGenVoipScalarDefaultSipTrunkread-writecurrentUsed to set the default SIP trunk for the shelf. This trunk specified by this oid will be used by voice users that are not explicitly connected to a SIP trunk.…
1.3.6.1.4.1.664.5.70.20.1.6.16ScalaradGenVoipScalarConnectedTimerread-writecurrentUsed to set the maximum interval of time in hours the phone can be in the connected state. Default: 12 hours. Value of 0 indicates the time is unlimited.
1.3.6.1.4.1.664.5.70.20.1.7NodeadGenVoipSPREMapScalarProv
1.3.6.1.4.1.664.5.70.20.1.7.1ScalaradGenVoipScalarSPREMapDisableCallWaitingread-writecurrentThis must be in the form of a SPRE code or dialing pattern containing wildcards. Available wildcards for this index are: N=2-9, M=1-8, X=0-9, [abc]=Any digit c…
1.3.6.1.4.1.664.5.70.20.1.7.2ScalaradGenVoipScalarSPREMapDNDDisableEnableread-writecurrentThis must be in the form of a SPRE code or dialing pattern containing wildcards. Available wildcards for this index are: N=2-9, M=1-8, X=0-9, [abc]=Any digit c…
1.3.6.1.4.1.664.5.70.20.1.7.3ScalaradGenVoipScalarSPREMapBlockCallerIDread-writecurrentThis must be in the form of a SPRE code or dialing pattern containing wildcards. Available wildcards for this index are: N=2-9, M=1-8, X=0-9, [abc]=Any digit c…
1.3.6.1.4.1.664.5.70.20.1.8NodeadGenVoipDialingProfileProv
1.3.6.1.4.1.664.5.70.20.1.8.1NodeadGenVoipDialingProfileDialPlanProv
1.3.6.1.4.1.664.5.70.20.1.8.1.1ScalaradGenVoipDialingProfileDialPlanProvCurrentNumberread-onlycurrentCurrent number of VoIP Dial Plan patterns defined.
1.3.6.1.4.1.664.5.70.20.1.8.1.2ScalaradGenVoipDialingProfileDialPlanProvLastCreateErrorread-onlycurrentThe reason for the last error that occurred while attempting to create an entry in the VoIP Dial Plan provisioning table (adGenVoipDialingProfileDialPlanProvTa…
1.3.6.1.4.1.664.5.70.20.1.8.1.3TableadGenVoipDialingProfileDialPlanProvTablenot-accessiblecurrentThis table supports provisioning of dial plan parameters for the VoIP call privilege mechanism.
1.3.6.1.4.1.664.5.70.20.1.8.1.3.1RowadGenVoipDialingProfileDialPlanProvEntrynot-accessiblecurrentAn entry in the adGenVoipDialingProfileDialPlanProvTable.
1.3.6.1.4.1.664.5.70.20.1.8.1.3.1.1ColumnadGenVoipDialingProfileDialPlanPatternEntryIndexnot-accessiblecurrentThe dial plan table index. This must be a dialing profile name as specified by AdGenVoipDialingProfileName followed by a '/' followed by a dial plan pattern. S…
1.3.6.1.4.1.664.5.70.20.1.8.1.3.1.2ColumnadGenVoipDialingProfileDialPlanRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table. Use createAndWait to add an entry, then set the all variables for the entry, t…
1.3.6.1.4.1.664.5.70.20.1.8.1.3.1.3ColumnadGenVoipDialingProfileDialPlanLastErrorStringread-onlycurrentThe reason for the last error that occurred while attempting to create an entry in the VoIP dial plan Table.
1.3.6.1.4.1.664.5.70.20.1.8.1.3.1.4ColumnadGenVoipDialingProfileDialPlanTyperead-createcurrentEnumerated value indicating which call class this particular dial plan entry is associated with. This object is mandatory for row activation.
1.3.6.1.4.1.664.5.70.20.1.8.1.3.1.5ColumnadGenVoipDialingProfileDialPlanEmergencyNumberread-createcurrentIdentify this plan as being for emergency calls.
1.3.6.1.4.1.664.5.70.20.1.8.1.3.1.6ColumnadGenVoipDialingProfileDialPlanExternalLineCoderead-createcurrentSpecify the matching behavior of this dial plan in the presence or absence of a matched external line code. A value of 'Prohibited' indicates that this dial pl…
1.3.6.1.4.1.664.5.70.20.1.8.1.3.1.7ColumnadGenVoipDialingProfileDialPlanPatternread-onlycurrentThe Dial Plan pattern used to match dialing strings. This must be in the form of a phone number or dialing pattern containing wildcards. Available wildcards fo…
1.3.6.1.4.1.664.5.70.20.1.8.1.3.1.8ColumnadGenVoipDialingProfileDialPlanDialingProfileread-onlycurrentThe Dialing Profile that this Dial Plan is assigned to.
1.3.6.1.4.1.664.5.70.20.1.8.2NodeadGenVoipDialingProfileSPREPatternProv
1.3.6.1.4.1.664.5.70.20.1.8.2.1ScalaradGenVoipDialingProfileSPREPatternProvCurrentNumberread-onlycurrentCurrent number of VoIP SPRE codes defined.
1.3.6.1.4.1.664.5.70.20.1.8.2.2ScalaradGenVoipDialingProfileSPREPatternProvLastCreateErrorread-onlycurrentThe reason for the last error that occurred while attempting to create an entry in the VoIP SPRE pattern provisioning table (adGenVoipDialingProfileSPREPattern…
1.3.6.1.4.1.664.5.70.20.1.8.2.3TableadGenVoipDialingProfileSPREPatternProvTablenot-accessiblecurrentThis table supports provisioning of SPRE pattern parameters.
1.3.6.1.4.1.664.5.70.20.1.8.2.3.1RowadGenVoipDialingProfileSPREPatternProvEntrynot-accessiblecurrentAn entry in the adGenVoipDialingProfileSPREPatternProvTable.
1.3.6.1.4.1.664.5.70.20.1.8.2.3.1.1ColumnadGenVoipDialingProfileSPREPatternEntryIndexnot-accessiblecurrentThe SPRE Pattern table index. This must be a dialing profile name as specified by AdGenVoipDialingProfileName followed by a '/' followed by a SPRE pattern. See…
1.3.6.1.4.1.664.5.70.20.1.8.2.3.1.2ColumnadGenVoipDialingProfileSPREPatternRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table. Use createAndWait to add an entry, set the available paramaters, then activate…
1.3.6.1.4.1.664.5.70.20.1.8.2.3.1.3ColumnadGenVoipDialingProfileSPREPatternLastErrorStringread-onlycurrentThe reason for the last error that occurred while attempting to create an entry in the VoIP SPRE pattern Table.
1.3.6.1.4.1.664.5.70.20.1.8.2.3.1.4ColumnadGenVoipDialingProfileSPREPatternToneread-createcurrentSpecify the tone to play back when this SPRE tone is matched. NOTE: If the last character of the SPRE code is not a '&' or a '$' this oid will fail when attemp…
1.3.6.1.4.1.664.5.70.20.1.8.2.3.1.5ColumnadGenVoipDialingProfileSPREPatternread-onlycurrentThe SPRE pattern used to match dialing strings. This must be in the form of a SPRE code or dialing pattern containing wildcards. Available wildcards for this i…
1.3.6.1.4.1.664.5.70.20.1.8.2.3.1.6ColumnadGenVoipDialingProfileSPREPatternDialingProfileread-onlycurrentThe Dialing Profile that this SPRE Pattern is assigned to.
1.3.6.1.4.1.664.5.70.20.1.8.3NodeadGenVoipDialingProfileExternalLineCodeProv
1.3.6.1.4.1.664.5.70.20.1.8.3.1ScalaradGenVoipDialingProfileExternalLineCodeProvCurrentNumberread-onlycurrentCurrent number of VoIP External Line Codes defined.
1.3.6.1.4.1.664.5.70.20.1.8.3.2ScalaradGenVoipDialingProfileExternalLineCodeProvLastCreateErrorread-onlycurrentThe reason for the last error that occurred while attempting to create an entry in the VoIP External Line Code provisioning table. (adGenVoipDialingProfileExte…
1.3.6.1.4.1.664.5.70.20.1.8.3.3TableadGenVoipDialingProfileExternalLineCodeProvTablenot-accessiblecurrentThis table supports provisioning of External Line Code parameters.
1.3.6.1.4.1.664.5.70.20.1.8.3.3.1RowadGenVoipDialingProfileExternalLineCodeProvEntrynot-accessiblecurrentAn entry in the adGenVoipDialingProfileExternalLineCodeProvTable.
1.3.6.1.4.1.664.5.70.20.1.8.3.3.1.1ColumnadGenVoipDialingProfileExternalLineCodeEntryIndexnot-accessiblecurrentThe DialingProfileExternal Line code index. This must be a dialing profile name as specified by AdGenVoipDialingProfileName followed by a '/' followed by an ex…
1.3.6.1.4.1.664.5.70.20.1.8.3.3.1.2ColumnadGenVoipDialingProfileExternalLineCodeRowStatusread-createcurrentThis object is used to create a new row or delete an existing row in this table. Use createAndWait to add an entry, set the available paramaters, then activate…
1.3.6.1.4.1.664.5.70.20.1.8.3.3.1.3ColumnadGenVoipDialingProfileExternalLineCodeLastErrorStringread-onlycurrentThe reason for the last error that occurred while attempting to create an entry in the VoIP External Line Code Table.
1.3.6.1.4.1.664.5.70.20.1.8.3.3.1.4ColumnadGenVoipDialingProfileExternalLineCodeToneread-createcurrentSpecify the tone to play back when this External Line Code tone is matched. NOTE: If the last character of the External Line Code code is not a '&' or a '$' th…
1.3.6.1.4.1.664.5.70.20.1.8.3.3.1.5ColumnadGenVoipDialingProfileExternalLineCodePatternread-onlycurrentThe external line code pattern used to match dialing strings. This must be in the form of a number or dialing pattern. It cannot contain wildcards. Ending the …
1.3.6.1.4.1.664.5.70.20.1.8.3.3.1.6ColumnadGenVoipDialingProfileExternalLineCodeDialingProfileread-onlycurrentDialing Profile that this external line code is assigned to.
1.3.6.1.4.1.664.5.70.20.1.8.4NodeadGenVoipDialingProfileProvExt
1.3.6.1.4.1.664.5.70.20.1.8.4.1TableadGenVoipDialingProfileProvExtTablenot-accessibledeprecatedThis table allows for operations on the entirety of a dialing profile.
1.3.6.1.4.1.664.5.70.20.1.8.4.1.1RowadGenVoipDialingProfileProvExtEntrynot-accessibledeprecatedAn entry in the adGenVoipDialingProfileProvExtTable.
1.3.6.1.4.1.664.5.70.20.1.8.4.1.1.1ColumnadGenVoipDialingProfileProvExtEntryIndexnot-accessibledeprecatedThe dialing profile table index. Entries in this table cannot be created, only read.
1.3.6.1.4.1.664.5.70.20.1.8.4.1.1.2ColumnadGenVoipDialingProfileProvExtNumVoiceUsersread-onlydeprecatedCurrent number of voice users using the specified dialing profile.
1.3.6.1.4.1.664.5.70.20.1.8.4.1.1.3ColumnadGenVoipDialingProfileProvExtRemoveProfileread-writedeprecatedWrite to this object to remove an entire dialing profile. Will always return (1) when read. Profiles can only be removed when they are not in use by any voice …
1.3.6.1.4.1.664.5.70.20.1.8.5NodeadGenVoipDialingProfileCommonProv
1.3.6.1.4.1.664.5.70.20.1.8.5.1ScalaradGenVoipDialingProfileCommonProvCurrentNumberread-onlycurrentCurrent number of VoIP Dialing Profiles defined.
1.3.6.1.4.1.664.5.70.20.1.8.5.2ScalaradGenVoipDialingProfileCommonProvLastCreateErrorread-onlycurrentThe reason for the last error that occurred while attempting to create an entry in the VoIP Dialing Profile Provisioning Extensions table. (adGenVoipDialingPro…
1.3.6.1.4.1.664.5.70.20.1.8.5.3TableadGenVoipDialingProfileCommonProvTablenot-accessiblecurrentThis table allows for operations on the entirety of a dialing profile.
1.3.6.1.4.1.664.5.70.20.1.8.5.3.1RowadGenVoipDialingProfileCommonProvEntrynot-accessiblecurrentAn entry in the adGenVoipDialingProfileCommonProvTable.
1.3.6.1.4.1.664.5.70.20.1.8.5.3.1.1ColumnadGenVoipDialingProfileCommonProvEntryIndexnot-accessiblecurrentThe dialing profile table index. Entries in this table cannot be deleted directly. To remove an entire dialing profile, use the adGenVoipDialingProfileCommonPr…
1.3.6.1.4.1.664.5.70.20.1.8.5.3.1.2ColumnadGenVoipDialingProfileCommonProvNumVoiceUsersread-onlycurrentCurrent number of voice users using the specified dialing profile.
1.3.6.1.4.1.664.5.70.20.1.8.5.3.1.3ColumnadGenVoipDialingProfileCommonProvRemoveProfileread-createcurrentWrite to this object to remove an entire dialing profile. Will always return (1) when read. Profiles can only be removed when they are not in use by any voice …
1.3.6.1.4.1.664.5.70.20.1.8.5.3.1.4ColumnadGenVoipDialingProfileCommonProvDescriptionread-createcurrentA user editable string used to describe the dialing profile.
1.3.6.1.4.1.664.5.70.20.1.8.5.3.1.5ColumnadGenVoipDialingProfileCommonProvRowStatusread-createcurrentThis object is used to create a new row in this table.
1.3.6.1.4.1.664.5.70.20.1.8.5.3.1.6ColumnadGenVoipDialingProfileCommonProvLastErrorStringread-onlycurrentThe reason for the last error that occurred while accessing an entry in the VoIP Dialing Profile Provisioning Extensions Table.
1.3.6.1.4.1.664.5.70.20.1.9NodeadGenVoipCodecProfileNameProv
1.3.6.1.4.1.664.5.70.20.1.9.1ScalaradGenVoipCodecProfileNameProvCurrentNumberread-onlycurrentCurrent number of VoIP CODEC Profile Name defined.
1.3.6.1.4.1.664.5.70.20.1.9.2ScalaradGenVoipCodecProfileNameProvLastCreateErrorread-onlycurrentThe reason for the last error that occurred while attempting to create an entry in the VoIP CODEC Profile Name provisioning table (adGenVoipCodecProfileNamePro…
1.3.6.1.4.1.664.5.70.20.1.9.3TableadGenVoipCodecProfileNameProvTablenot-accessiblecurrentThis table supports provisioning of CODEC profile name parameters.
1.3.6.1.4.1.664.5.70.20.1.9.3.1RowadGenVoipCodecProfileNameProvEntrynot-accessiblecurrentAn entry in the adGenVoipCodecProfileNameProvTable.
1.3.6.1.4.1.664.5.70.20.1.9.3.1.1ColumnadGenVoipCodecProfileNameProvIndexnot-accessiblecurrentThe name of the Codec Profile.
1.3.6.1.4.1.664.5.70.20.1.9.3.1.2ColumnadGenVoipCodecProfileNameProvRowStatusread-createcurrentThis object is used to create a new row or modify or delete an existing row in this table.
1.3.6.1.4.1.664.5.70.20.1.9.3.1.3ColumnadGenVoipCodecProfileNameProvLastErrorStringread-onlycurrentThe reason for the last error that occurred while attempting to create or modify an profile entry within this CODEC name.
1.3.6.1.4.1.664.5.70.20.1.9.3.1.4ColumnadGenVoipCodecProfilePreferenceLastCreateErrorread-onlycurrentThe reason why last creation of Perference Entry had failed within this CODEC name.
1.3.6.1.4.1.664.5.70.20.1.10NodeadGenVoipCodecProfileProv
1.3.6.1.4.1.664.5.70.20.1.10.1TableadGenVoipCodecProfileProvTablenot-accessiblecurrentThis table supports provisioning of CODEC profile parameters.
1.3.6.1.4.1.664.5.70.20.1.10.1.1RowadGenVoipCodecProfileProvEntrynot-accessiblecurrentAn entry in the adGenVoipCodecProfileProvTable.
1.3.6.1.4.1.664.5.70.20.1.10.1.1.1ColumnadGenVoipCodecProfileProvIndexnot-accessiblecurrentThis used to index preference entrees.
1.3.6.1.4.1.664.5.70.20.1.10.1.1.2ColumnadGenVoipCodecProfileProvRowStatusread-createcurrentThis object is used to create a new row or modify or delete an existing row in this table.
1.3.6.1.4.1.664.5.70.20.1.10.1.1.3ColumnadGenVoipCodecProfileProvLastErrorStringread-onlycurrentThe reason for the last error that occurred while attempting to create or modify an entry in the CODEC Profile Prov Table.
1.3.6.1.4.1.664.5.70.20.1.10.1.1.4ColumnadGenVoipCodecProfileProvPreferenceread-createcurrentThis sets the CODEC preference. A set with a none(0) value will be rejected.
1.3.6.1.4.1.664.5.70.20.1.11NodeadGenVoipMediaProfileProv
1.3.6.1.4.1.664.5.70.20.1.11.1ScalaradGenVoipMediaProfileProvCurrentNumberread-onlycurrentCurrent number of VoIP Media Profile defined.
1.3.6.1.4.1.664.5.70.20.1.11.2ScalaradGenVoipMediaProfileProvLastCreateErrorread-onlycurrentThe reason for the last error that occurred while attempting to create an entry in the VoIP Media Profile provisioning table (adGenVoipMediaProfileProvTable).
1.3.6.1.4.1.664.5.70.20.1.11.3TableadGenVoipMediaProfileProvTablenot-accessiblecurrentThis table supports provisioning of Media profile parameters.
1.3.6.1.4.1.664.5.70.20.1.11.3.1RowadGenVoipMediaProfileProvEntrynot-accessiblecurrentAn entry in the adGenVoipMediaProfileProvTable.
1.3.6.1.4.1.664.5.70.20.1.11.3.1.1ColumnadGenVoipMediaProfileProvEntryIndexnot-accessiblecurrentThe name of the Media Profile.
1.3.6.1.4.1.664.5.70.20.1.11.3.1.2ColumnadGenVoipMediaProfileProvRowStatusread-createcurrentThis object is used to create a new row or modify or delete an existing row in this table.
1.3.6.1.4.1.664.5.70.20.1.11.3.1.3ColumnadGenVoipMediaProfileProvLastErrorStringread-onlycurrentThe reason for the last error that occurred while attempting to create or modify an entry in the Media Profile Prov Table.
1.3.6.1.4.1.664.5.70.20.1.11.3.1.4ColumnadGenVoipMediaProfileProvRtpFramePktizationread-createcurrentRTP Frame Packetization value in Milliseconds. Allowed values are 10, 20 and 30.
1.3.6.1.4.1.664.5.70.20.1.11.3.1.5ColumnadGenVoipMediaProfileProvRtpPktDelayNominalread-createcurrentRTP Packet Delay Nominal setting in Milliseconds.
1.3.6.1.4.1.664.5.70.20.1.11.3.1.6ColumnadGenVoipMediaProfileProvRtpPktDelayMaximumread-createcurrentRTP Packet Delay Maximum setting in Milliseconds.
1.3.6.1.4.1.664.5.70.20.1.11.3.1.7ColumnadGenVoipMediaProfileProvRtpDtmfRelayread-createcurrentEnable/Disable RTP DTMF. Disabled is 1, Enabled is 2.
1.3.6.1.4.1.664.5.70.20.1.11.3.1.8ColumnadGenVoipMediaProfileProvRtpQosDscpread-createcurrentRTP QoS DSCP setting
1.3.6.1.4.1.664.5.70.20.1.11.3.1.9ColumnadGenVoipMediaProfileProvRtpLocalPortMinread-createcurrentRTP Local Port Minimal setting
1.3.6.1.4.1.664.5.70.20.1.11.3.1.10ColumnadGenVoipMediaProfileProvRtpLocalPortMaxread-createcurrentRTP Local Port Maximum setting
1.3.6.1.4.1.664.5.70.20.1.11.3.1.11ColumnadGenVoipMediaProfileProvFaxModeread-createcurrentFax Modem setting
1.3.6.1.4.1.664.5.70.20.1.11.3.1.12ColumnadGenVoipMediaProfileProvEchoCancellationread-createcurrentEcho Cancellation setting
1.3.6.1.4.1.664.5.70.20.1.11.3.1.13ColumnadGenVoipMediaProfileProvFlashHookMinread-createcurrentFlash Hook Minimal Threshold setting in Milliseconds. Default: 300 Milliseconds.
1.3.6.1.4.1.664.5.70.20.1.11.3.1.14ColumnadGenVoipMediaProfileProvFlashHookMaxread-createcurrentFlash Hook Maximum Threshold setting in Milliseconds. Default: 1000 Milliseconds.
1.3.6.1.4.1.664.5.70.20.1.11.3.1.15ColumnadGenVoipMediaProfileProvVADread-createcurrentVoice Activation Detection setting
1.3.6.1.4.1.664.5.70.20.1.12NodeadGenVoipCallFeatureProfileProv
1.3.6.1.4.1.664.5.70.20.1.12.1ScalaradGenVoipCallFeatureProfileCurrentNumberread-onlycurrentCurrent number of VoIP Call Feature Profile defined.
1.3.6.1.4.1.664.5.70.20.1.12.2ScalaradGenVoipCallFeatureProfileLastCreateErrorread-onlycurrentThe reason for the last error that occured while attempting to create an entry in the VoIP Call Feature Profile provisioning table (adGenVoipCallFeatureProfile…
1.3.6.1.4.1.664.5.70.20.1.12.3TableadGenVoipCallFeatureProfileProvTablenot-accessiblecurrentThis table supports provisioning of Call Feature profile parameters.
1.3.6.1.4.1.664.5.70.20.1.12.3.1RowadGenVoipCallFeatureProfileProvEntrynot-accessiblecurrentAn entry in the adGenVoipCallFeatureProfileProvTable.
1.3.6.1.4.1.664.5.70.20.1.12.3.1.1ColumnadGenVoipCallFeatureProfileEntryIndexnot-accessiblecurrentThe name of the Call Feature Profile.
1.3.6.1.4.1.664.5.70.20.1.12.3.1.2ColumnadGenVoipCallFeatureProfileRowStatusread-createcurrentThis object is used to create a new row or modify or delete an existing row in this table.
1.3.6.1.4.1.664.5.70.20.1.12.3.1.3ColumnadGenVoipCallFeatureProfileLastErrorStringread-onlycurrentThe reason for the last error that occured while attempting to create or modify an entry in the Call Feature Profile Prov Table.
1.3.6.1.4.1.664.5.70.20.1.12.3.1.4ColumnadGenVoipCallFeatureProfileEmergencyNumberRingingTimeoutread-createcurrentMaximum time a phone rings after hanging up on the emergency operator, in minutes. This only applies to VoIP protocols with a locally configurable dial-plan.
1.3.6.1.4.1.664.5.70.20.1.12.3.1.5ColumnadGenVoipCallFeatureProfileEmergencyNumberOnhookread-createcurrentAllow or prohibit user to disconnect an emergency call. This only applies to VoIP protocols with a locally configurable dial-plan.
1.3.6.1.4.1.664.5.70.20.1.12.3.1.6ColumnadGenVoipCallFeatureProfileCallWaitingread-createcurrentCall waiting. Allow call waiting notification on an incoming call.
1.3.6.1.4.1.664.5.70.20.1.12.3.1.7ColumnadGenVoipCallFeatureProfileCallerIdInboundread-createcurrentCaller ID inbound. Allow inbound caller ID to be displayed locally.
1.3.6.1.4.1.664.5.70.20.1.12.3.1.8ColumnadGenVoipCallFeatureProfileCallerIdOutboundread-createcurrentCaller ID outbound. Enable/Disable outbound caller ID from this endpoint. Applies primarily to SIP.
1.3.6.1.4.1.664.5.70.20.1.12.3.1.9ColumnadGenVoipCallFeatureProfileTransferOnHangupread-createcurrentEnable/Disable transfer on caller hanging up. Applies primarily to SIP.
1.3.6.1.4.1.664.5.70.20.1.12.3.1.10ColumnadGenVoipCallFeatureProfileTimeoutAlertingread-createcurrentMaximum time a call can remain in alerting state. Time in minutes, 0 is unlimited.
1.3.6.1.4.1.664.5.70.20.1.12.3.1.11ColumnadGenVoipCallFeatureProfileTimeoutInterdigitread-createcurrentTime allowed between dialed digits. Time in seconds.
1.3.6.1.4.1.664.5.70.20.1.12.3.1.12ColumnadGenVoipCallFeatureProfileConferenceread-createcurrentEnable/Disable conferencing.
1.3.6.1.4.1.664.5.70.20.1.12.3.1.13ColumnadGenVoipCallFeatureProfileConferenceLocalOriginatorFlashhoookread-createcurrentSetting for behavior in response to actions by the conference originator: 1) Drop the last party added; 2) Ignore flashhook; 3) Split the conference. Applies p…
1.3.6.1.4.1.664.5.70.20.1.12.3.1.14ColumnadGenVoipCallFeatureProfileFeatureModeread-createcurrentDetermines if flashhook and conferencing is to be processed and performed locally or at the switch.
1.3.6.1.4.1.664.5.70.20.1.13NodeadGenVoipUserReverseLookup
1.3.6.1.4.1.664.5.70.20.1.13.1TableadGenVoipUserReverseLookupTablenot-accessiblecurrentThis table provides the user name of all connected voice users by ifindex.
1.3.6.1.4.1.664.5.70.20.1.13.1.1RowadGenVoipUserReverseLookupTableEntrynot-accessiblecurrentAn entry in the adGenVoipUserReverseLookupTable.
1.3.6.1.4.1.664.5.70.20.1.13.1.1.1ColumnadGenVoipUserReverseLookupTableEntryIndexread-onlycurrentThe index to the Reverse Lookup Table.
1.3.6.1.4.1.664.5.70.20.1.13.1.1.2ColumnadGenVoipUserReverseLookupTableUserNameread-onlycurrentThe voice user name corresponding to the index.
1.3.6.1.4.1.664.5.70.20.1.14NodeadGenVoipSDPProv
1.3.6.1.4.1.664.5.70.20.1.14.1ScalaradGenVoipSDPGrammarPtimeread-writecurrentWhen enabled, the ptime attribute will be included in the SDP Offer. When disabled, the ptime attribute may be omitted for implied values, such as 20ms.
1.3.6.1.4.1.664.5.70.20.1.14.2ScalaradGenVoipSDPGrammarSuppressSilenceSuppread-writecurrentWhen enabled, the silenceSupp attribute will be omitted from the SDP Offer. When disabled, the silenceSupp attribute will be included in the SDP Offer. The sil…
1.3.6.1.4.1.664.5.70.20.2NodeadGenVoipStatus
1.3.6.1.4.1.664.5.70.20.2.1NodeadGenVoipUserStatus
1.3.6.1.4.1.664.5.70.20.2.1.1NodeadGenVoipUserHotlineStatus
1.3.6.1.4.1.664.5.70.20.2.1.1.1TableadGenVoipUserHotlineStatusTablenot-accessiblecurrentThis table provides the status information for the hotline feature of voice users.
1.3.6.1.4.1.664.5.70.20.2.1.1.1.1RowadGenVoipUserHotlineStatusTableEntrynot-accessiblecurrentAn entry in the adGenVoipUserHotlineStatusTable.
1.3.6.1.4.1.664.5.70.20.2.1.1.1.1.1ColumnadGenVoipUserHotlineStatusEntryIndexread-onlycurrentThe index to the Voice User Hotline Status Table. This is the same as the index to the adGenVoipUserProv table.
1.3.6.1.4.1.664.5.70.20.2.1.1.1.1.2ColumnadGenVoipUserHotlineStatusNumberread-onlycurrentThe phone number that is dialed when this voice user goes off-hook.
1.3.6.1.4.1.664.5.70.20.2.1.1.1.1.3ColumnadGenVoipUserHotlineStatusHotlineStateread-onlycurrentThe status of the hotline feature for this voice user. Values include: 'Immediate' - This number will be dialed immediately upon off-hook 'Delayed - No Matchin…
1.3.6.1.4.1.664.5.70.20.2.2NodeadGenVoipScalarStatus
1.3.6.1.4.1.664.5.70.20.2.2.1ScalaradGenVoipScalarStatusMaxSupportedSipTrunksread-onlycurrentMaximum number of SIP trunks that the shelf can support.
1.3.6.1.4.1.664.5.70.20.2.2.2ScalaradGenVoipScalarStatusNumberOfSipTrunksread-onlycurrentNumber of SIP trunks that currently exist on the shelf.
1.3.6.1.4.1.664.6.10000.70.20.1IdentityadGenVoipIdentityThis MIB defines the objects for VoIP management.
Type Definitions
NameSyntaxStatusDescription
AdGenVoipCallFeatureProfileNameOCTET STRING (SIZE(1..40))currentThe name of a Call Feature Profile.
AdGenVoipCallReverseLookupIfIndexINTEGER(0..1000000000)currentThe fxs port of a connected Voice User.
AdGenVoipCallServiceClassNameOCTET STRING (SIZE(1..40))currentThe name for the call class table instance.
AdGenVoipCodecProfileNameOCTET STRING (SIZE(1..40))currentThe name of a Codec Profile.
AdGenVoipCodecProfileTypeINTEGER { none(0), g711ulaw(1), g711alaw(2), g729(3) }currentCODEC preference types.
AdGenVoipDialingProfileNameOCTET STRING (SIZE(1..40))currentThe name of a Dialing Profile. An instance of this contains dialing plans, spre codes, and external line codes. This name, forward slash (/) delimited with the table specific pattern, forms the index for the dial plan t…
AdGenVoipMediaProfileNameOCTET STRING (SIZE(1..40))currentThe name of a Media Profile.
AdGenVoipTrunkNameOCTET STRING (SIZE(10))currentThe name of the VoIP trunk. It must be of the form <Txx> (without the brackets), and it must be padded at the end with 0x00 so that the table index has a fixed length of 10 characters. Used to index the generic VoIP tru…
AdGenVoipUserNumberOCTET STRING (SIZE(20))currentThe VoIP user. This must be in the form of an extension or phone number. Only digits 0-9 are accepted. It must be padded at the end with 0x00 so that the table index has a fixed length of 20 characters. Used to index th…