MIB Viewer

agent

57 objects
The MIB module for BGP-4.
Imported Objects
RFC1213-MIBmib-2
SNMPv2-SMICounter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
OIDNameAccessStatusDescription
1.3.6.1.2.1.15IdentitybgpThe MIB module for BGP-4.
1.3.6.1.2.1.15.1ScalarbgpVersionread-onlycurrentVector of supported BGP protocol version numbers. Each peer negotiates the version from this vector. Versions are identified via the string of bits contained w…
1.3.6.1.2.1.15.2ScalarbgpLocalAsread-onlycurrentThe local autonomous system number.
1.3.6.1.2.1.15.3TablebgpPeerTablenot-accessiblecurrentBGP peer table. This table contains, one entry per BGP peer, information about the connections with BGP peers.
1.3.6.1.2.1.15.3.1RowbgpPeerEntrynot-accessiblecurrentEntry containing information about the connection with a BGP peer.
1.3.6.1.2.1.15.3.1.1ColumnbgpPeerIdentifierread-onlycurrentThe BGP Identifier of this entry's BGP peer.
1.3.6.1.2.1.15.3.1.2ColumnbgpPeerStateread-onlycurrentThe BGP peer connection state.
1.3.6.1.2.1.15.3.1.3ColumnbgpPeerAdminStatusread-writecurrentThe desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. A transition from 'start' to 'stop…
1.3.6.1.2.1.15.3.1.4ColumnbgpPeerNegotiatedVersionread-onlycurrentThe negotiated version of BGP running between the two peers.
1.3.6.1.2.1.15.3.1.5ColumnbgpPeerLocalAddrread-onlycurrentThe local IP address of this entry's BGP connection.
1.3.6.1.2.1.15.3.1.6ColumnbgpPeerLocalPortread-onlycurrentThe local port for the TCP connection between the BGP peers.
1.3.6.1.2.1.15.3.1.7ColumnbgpPeerRemoteAddrread-onlycurrentThe remote IP address of this entry's BGP peer.
1.3.6.1.2.1.15.3.1.8ColumnbgpPeerRemotePortread-onlycurrentThe remote port for the TCP connection between the BGP peers. Note that the objects bgpPeerLocalAddr, bgpPeerLocalPort, bgpPeerRemoteAddr and bgpPeerRemotePort…
1.3.6.1.2.1.15.3.1.9ColumnbgpPeerRemoteAsread-onlycurrentThe remote autonomous system number.
1.3.6.1.2.1.15.3.1.10ColumnbgpPeerInUpdatesread-onlycurrentThe number of BGP UPDATE messages received on this connection. This object should be initialized to zero (0) when the connection is established.
1.3.6.1.2.1.15.3.1.11ColumnbgpPeerOutUpdatesread-onlycurrentThe number of BGP UPDATE messages transmitted on this connection. This object should be initialized to zero (0) when the connection is established.
1.3.6.1.2.1.15.3.1.12ColumnbgpPeerInTotalMessagesread-onlycurrentThe total number of messages received from the remote peer on this connection. This object should be initialized to zero when the connection is established.
1.3.6.1.2.1.15.3.1.13ColumnbgpPeerOutTotalMessagesread-onlycurrentThe total number of messages transmitted to the remote peer on this connection. This object should be initialized to zero when the connection is established.
1.3.6.1.2.1.15.3.1.14ColumnbgpPeerLastErrorread-onlycurrentThe last error code and subcode seen by this peer on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte …
1.3.6.1.2.1.15.3.1.15ColumnbgpPeerFsmEstablishedTransitionsread-onlycurrentThe total number of times the BGP FSM transitioned into the established state.
1.3.6.1.2.1.15.3.1.16ColumnbgpPeerFsmEstablishedTimeread-onlycurrentThis timer indicates how long (in seconds) this peer has been in the Established state or how long since this peer was last in the Established state. It is set…
1.3.6.1.2.1.15.3.1.17ColumnbgpPeerConnectRetryIntervalread-writecurrentTime interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds.
1.3.6.1.2.1.15.3.1.18ColumnbgpPeerHoldTimeread-onlycurrentTime interval in seconds for the Hold Timer established with the peer. The value of this object is calculated by this BGP speaker by using the smaller of the v…
1.3.6.1.2.1.15.3.1.19ColumnbgpPeerKeepAliveread-onlycurrentTime interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared…
1.3.6.1.2.1.15.3.1.20ColumnbgpPeerHoldTimeConfiguredread-writecurrentTime interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BG…
1.3.6.1.2.1.15.3.1.21ColumnbgpPeerKeepAliveConfiguredread-writecurrentTime interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE mes…
1.3.6.1.2.1.15.3.1.22ColumnbgpPeerMinASOriginationIntervalread-writecurrentTime interval in seconds for the MinASOriginationInterval timer. The suggested value for this timer is 15 seconds.
1.3.6.1.2.1.15.3.1.23ColumnbgpPeerMinRouteAdvertisementIntervalread-writecurrentTime interval in seconds for the MinRouteAdvertisementInterval timer. The suggested value for this timer is 30 seconds.
1.3.6.1.2.1.15.3.1.24ColumnbgpPeerInUpdateElapsedTimeread-onlycurrentElapsed time in seconds since the last BGP UPDATE message was received from the peer. Each time bgpPeerInUpdates is incremented, the value of this object is se…
1.3.6.1.2.1.15.4ScalarbgpIdentifierread-onlycurrentThe BGP Identifier of local system.
1.3.6.1.2.1.15.5TablebgpRcvdPathAttrTablenot-accessibleobsoleteThe BGP Received Path Attribute Table contains information about paths to destination networks received from all peers running BGP version 3 or less.
1.3.6.1.2.1.15.5.1RowbgpPathAttrEntrynot-accessibleobsoleteInformation about a path to a network.
1.3.6.1.2.1.15.5.1.1ColumnbgpPathAttrPeerread-onlyobsoleteThe IP address of the peer where the path information was learned.
1.3.6.1.2.1.15.5.1.2ColumnbgpPathAttrDestNetworkread-onlyobsoleteThe address of the destination network.
1.3.6.1.2.1.15.5.1.3ColumnbgpPathAttrOriginread-onlyobsoleteThe ultimate origin of the path information.
1.3.6.1.2.1.15.5.1.4ColumnbgpPathAttrASPathread-onlyobsoleteThe set of ASs that must be traversed to reach the network. This object is probably best represented as SEQUENCE OF INTEGER. For SMI compatibility, though, it …
1.3.6.1.2.1.15.5.1.5ColumnbgpPathAttrNextHopread-onlyobsoleteThe address of the border router that should be used for the destination network.
1.3.6.1.2.1.15.5.1.6ColumnbgpPathAttrInterASMetricread-onlyobsoleteThe optional inter-AS metric. If this attribute has not been provided for this route, the value for this object is 0.
1.3.6.1.2.1.15.6Tablebgp4PathAttrTablenot-accessiblecurrentThe BGP-4 Received Path Attribute Table contains information about paths to destination networks received from all BGP4 peers.
1.3.6.1.2.1.15.6.1Rowbgp4PathAttrEntrynot-accessiblecurrentInformation about a path to a network.
1.3.6.1.2.1.15.6.1.1Columnbgp4PathAttrPeerread-onlycurrentThe IP address of the peer where the path information was learned.
1.3.6.1.2.1.15.6.1.2Columnbgp4PathAttrIpAddrPrefixLenread-onlycurrentLength in bits of the IP address prefix in the Network Layer Reachability Information field.
1.3.6.1.2.1.15.6.1.3Columnbgp4PathAttrIpAddrPrefixread-onlycurrentAn IP address prefix in the Network Layer Reachability Information field. This object is an IP address containing the prefix with length specified by bgp4PathA…
1.3.6.1.2.1.15.6.1.4Columnbgp4PathAttrOriginread-onlycurrentThe ultimate origin of the path information.
1.3.6.1.2.1.15.6.1.5Columnbgp4PathAttrASPathSegmentread-onlycurrentThe sequence of AS path segments. Each AS path segment is represented by a triple <type, length, value>. The type is a 1-octet field which has two possib…
1.3.6.1.2.1.15.6.1.6Columnbgp4PathAttrNextHopread-onlycurrentThe address of the border router that should be used for the destination network.
1.3.6.1.2.1.15.6.1.7Columnbgp4PathAttrMultiExitDiscread-onlycurrentThis metric is used to discriminate between multiple exit points to an adjacent autonomous system. A value of -1 indicates the absence of this attribute.
1.3.6.1.2.1.15.6.1.8Columnbgp4PathAttrLocalPrefread-onlycurrentThe originating BGP4 speaker's degree of preference for an advertised route. A value of -1 indicates the absence of this attribute.
1.3.6.1.2.1.15.6.1.9Columnbgp4PathAttrAtomicAggregateread-onlycurrentWhether or not the local system has selected a less specific route without selecting a more specific route.
1.3.6.1.2.1.15.6.1.10Columnbgp4PathAttrAggregatorASread-onlycurrentThe AS number of the last BGP4 speaker that performed route aggregation. A value of zero (0) indicates the absence of this attribute.
1.3.6.1.2.1.15.6.1.11Columnbgp4PathAttrAggregatorAddrread-onlycurrentThe IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute.
1.3.6.1.2.1.15.6.1.12Columnbgp4PathAttrCalcLocalPrefread-onlycurrentThe degree of preference calculated by the receiving BGP4 speaker for an advertised route. A value of -1 indicates the absence of this attribute.
1.3.6.1.2.1.15.6.1.13Columnbgp4PathAttrBestread-onlycurrentAn indication of whether or not this route was chosen as the best BGP4 route.
1.3.6.1.2.1.15.6.1.14Columnbgp4PathAttrUnknownread-onlycurrentOne or more path attributes not understood by this BGP4 speaker. Size zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size, if a…
1.3.6.1.2.1.15.7NodebgpTraps
1.3.6.1.2.1.15.7.1NotificationbgpEstablishedcurrentThe BGP Established event is generated when the BGP FSM enters the ESTABLISHED state.
1.3.6.1.2.1.15.7.2NotificationbgpBackwardTransitioncurrentThe BGPBackwardTransition Event is generated when the BGP FSM moves from a higher numbered state to a lower numbered state.