oracle/SUN-T300-MIB
209 objects
The MIB module for Sun StorEdge T300
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter IpAddress |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | BEGIN IMPORTS MODULE-IDENTITY enterprises OBJECT-IDENTITY |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.42 | Nodesun | |||
| 1.3.6.1.4.1.42.2 | Nodeproducts | |||
| 1.3.6.1.4.1.42.2.28 | Nodestorage-subsystem | |||
| 1.3.6.1.4.1.42.2.28.2 | Identityt300 | The MIB module for Sun StorEdge T300 | ||
| 1.3.6.1.4.1.42.2.28.2.1 | Nodet300Reg | |||
| 1.3.6.1.4.1.42.2.28.2.1.1 | Identityt300Purple1 | current | Purple 1 Storage Array | |
| 1.3.6.1.4.1.42.2.28.2.2 | Nodet300Objs | |||
| 1.3.6.1.4.1.42.2.28.2.2.1 | Nodet300SystemObjs | |||
| 1.3.6.1.4.1.42.2.28.2.2.1.1 | ScalarsysId | read-only | mandatory | The system name. |
| 1.3.6.1.4.1.42.2.28.2.2.1.2 | ScalarsysVendor | read-only | mandatory | The system vendor. |
| 1.3.6.1.4.1.42.2.28.2.2.1.3 | ScalarsysModel | read-only | mandatory | The system model. |
| 1.3.6.1.4.1.42.2.28.2.2.1.4 | ScalarsysRevision | read-only | mandatory | The system firmware revision. |
| 1.3.6.1.4.1.42.2.28.2.2.1.5 | ScalarsysStripeUnitSize | read-only | mandatory | The current system stripe unit size. |
| 1.3.6.1.4.1.42.2.28.2.2.1.6 | ScalarsysCacheMode | read-only | mandatory | The current system buffer cache mode. |
| 1.3.6.1.4.1.42.2.28.2.2.1.7 | ScalarsysCacheMirror | read-only | mandatory | The current system buffer cache mirror mode. |
| 1.3.6.1.4.1.42.2.28.2.2.1.8 | ScalarsysAutoDisable | read-only | obsolete | The current system auto-disable/reconstruct policy. |
| 1.3.6.1.4.1.42.2.28.2.2.1.9 | ScalarsysMpSupport | read-only | mandatory | The current multi-pathing support mode. |
| 1.3.6.1.4.1.42.2.28.2.2.1.10 | ScalarsysReadAhead | read-only | mandatory | The number of consecutive contiguous read commands received before triggering read-ahead. |
| 1.3.6.1.4.1.42.2.28.2.2.1.11 | ScalarsysReconRate | read-only | mandatory | A value controlling the amount of bandwidth allocated to disk reconstruction. |
| 1.3.6.1.4.1.42.2.28.2.2.1.12 | ScalarsysOndgMode | read-only | mandatory | The current on-line loop diagnostic mode. |
| 1.3.6.1.4.1.42.2.28.2.2.1.13 | ScalarsysOndgTimeslice | read-only | mandatory | The time-slice in seconds devoted to normal I/O between loop diagnostic data pattern I/O. |
| 1.3.6.1.4.1.42.2.28.2.2.1.14 | ScalarsysIdleDiskTimeout | read-only | obsolete | The number of hours (1-24) that a disk is permitted to be idle before the system automatically performs a seek on that disk. |
| 1.3.6.1.4.1.42.2.28.2.2.1.15 | ScalarsysFruRemovalShutdown | read-only | mandatory | The number of seconds remaining before the system automatically shuts down due to a FRU being removed and not replaced. |
| 1.3.6.1.4.1.42.2.28.2.2.1.16 | ScalarsysBootMode | read-only | mandatory | The current system boot mode. |
| 1.3.6.1.4.1.42.2.28.2.2.1.17 | ScalarsysBootDelay | read-only | mandatory | A time delay in seconds during which time a user could strike a key at the system console to interrupt EPROM boot process. |
| 1.3.6.1.4.1.42.2.28.2.2.1.18 | ScalarsysSpinDelay | read-only | obsolete | Not in use. |
| 1.3.6.1.4.1.42.2.28.2.2.1.19 | ScalarsysTftpHost | read-only | mandatory | When boot mode is 'tftp', specifies the IP address of the tftp server. |
| 1.3.6.1.4.1.42.2.28.2.2.1.20 | ScalarsysTftpFile | read-only | mandatory | When boot mode is 'tftp', specifies the file name to read from the tftp server. |
| 1.3.6.1.4.1.42.2.28.2.2.1.21 | ScalarsysIpAddr | read-only | mandatory | The IP address of the system. |
| 1.3.6.1.4.1.42.2.28.2.2.1.22 | ScalarsysSubNet | read-only | mandatory | The subnet mask of the system. |
| 1.3.6.1.4.1.42.2.28.2.2.1.23 | ScalarsysGateway | read-only | mandatory | The default gateway IP address. |
| 1.3.6.1.4.1.42.2.28.2.2.1.24 | ScalarsysWriteRequests | read-only | mandatory | The current number of write requests received from all host ports. |
| 1.3.6.1.4.1.42.2.28.2.2.1.25 | ScalarsysReadRequests | read-only | mandatory | The current number of read requests received from all host ports. |
| 1.3.6.1.4.1.42.2.28.2.2.1.26 | ScalarsysBlocksWritten | read-only | mandatory | The current number of blocks written (received from) all host ports. |
| 1.3.6.1.4.1.42.2.28.2.2.1.27 | ScalarsysBlocksRead | read-only | mandatory | The current number of blocks read (transmitted to) all host ports. |
| 1.3.6.1.4.1.42.2.28.2.2.1.28 | ScalarsysCacheWriteHits | read-only | mandatory | The current number of blocks in the cache re-written before the previous contents have been written to disk. |
| 1.3.6.1.4.1.42.2.28.2.2.1.29 | ScalarsysCacheWriteMisses | read-only | mandatory | The current number of new blocks written to the cache. |
| 1.3.6.1.4.1.42.2.28.2.2.1.30 | ScalarsysCacheReadHits | read-only | mandatory | The current number of blocks read from cache. |
| 1.3.6.1.4.1.42.2.28.2.2.1.31 | ScalarsysCacheReadMisses | read-only | mandatory | The current number of blocks read from disk into the cache. |
| 1.3.6.1.4.1.42.2.28.2.2.1.32 | ScalarsysCacheRmwFlushes | read-only | mandatory | The current number of read-modify-write stripe operations executed by cache flush. |
| 1.3.6.1.4.1.42.2.28.2.2.1.33 | ScalarsysCacheReconFlushes | read-only | mandatory | The current number of reconstruct-write stripe operations executed by cache flush. |
| 1.3.6.1.4.1.42.2.28.2.2.1.34 | ScalarsysCacheStripeFlushes | read-only | mandatory | The current number of strip-write stripe operations executed by cache flush. |
| 1.3.6.1.4.1.42.2.28.2.2.1.35 | ScalarsysTimezone | read-only | mandatory | Specifies the timezone offset, the difference between local time and universal time (UTC). |
| 1.3.6.1.4.1.42.2.28.2.2.1.36 | ScalarsysDate | read-only | mandatory | A string of the form 'YYYYMMDD'. |
| 1.3.6.1.4.1.42.2.28.2.2.1.37 | ScalarsysTime | read-only | mandatory | A string of the form 'HHMMSS'. |
| 1.3.6.1.4.1.42.2.28.2.2.1.38 | ScalarsysRootSession | read-only | obsolete | Not in use. |
| 1.3.6.1.4.1.42.2.28.2.2.1.39 | ScalarsysGuestSession | read-only | obsolete | Not in use. |
| 1.3.6.1.4.1.42.2.28.2.2.1.40 | ScalarsysLastMessage | read-only | mandatory | Last syslog message. Used for Trap only. |
| 1.3.6.1.4.1.42.2.28.2.2.1.41 | ScalarsysRarpEnabled | read-only | mandatory | A flag indicating whether RARP protocol is used to obtain the system IP address. |
| 1.3.6.1.4.1.42.2.28.2.2.1.42 | ScalarsysLoop1Split | read-only | mandatory | A flag indicating whether Loop 1 can be split into two segments. |
| 1.3.6.1.4.1.42.2.28.2.2.1.43 | ScalarsysLastRestart | read-only | mandatory | The date and time of the last system restart. |
| 1.3.6.1.4.1.42.2.28.2.2.1.44 | ScalarsysCtime | read-only | mandatory | The current date and time. |
| 1.3.6.1.4.1.42.2.28.2.2.1.45 | ScalarsysHasVolumes | read-only | mandatory | A flag indicating whether or not there are any currently created volumes. |
| 1.3.6.1.4.1.42.2.28.2.2.2 | Nodet300UnitObjs | |||
| 1.3.6.1.4.1.42.2.28.2.2.2.1 | ScalarunitCount | read-only | mandatory | The number of units in the system. |
| 1.3.6.1.4.1.42.2.28.2.2.2.2 | TableunitTable | not-accessible | mandatory | A table of unitEntrys |
| 1.3.6.1.4.1.42.2.28.2.2.2.2.1 | RowunitEntry | not-accessible | mandatory | An entry in the unitTable. |
| 1.3.6.1.4.1.42.2.28.2.2.2.2.1.1 | ColumnunitIndex | read-only | mandatory | A number referring to a specific unit in the system. |
| 1.3.6.1.4.1.42.2.28.2.2.2.2.1.2 | ColumnunitId | read-only | mandatory | The unit id string. |
| 1.3.6.1.4.1.42.2.28.2.2.2.2.1.3 | ColumnunitType | read-only | mandatory | The unit type. |
| 1.3.6.1.4.1.42.2.28.2.2.2.2.1.4 | ColumnunitStandby | read-only | mandatory | A flag indicating whether drive 9 in the unit is a standby. |
| 1.3.6.1.4.1.42.2.28.2.2.3 | Nodet300FruObjs | |||
| 1.3.6.1.4.1.42.2.28.2.2.3.1 | ScalarfruCount | read-only | mandatory | The total number of FRU's in the system. |
| 1.3.6.1.4.1.42.2.28.2.2.3.2 | TablefruTable | not-accessible | mandatory | A table of fruEntry. |
| 1.3.6.1.4.1.42.2.28.2.2.3.2.1 | RowfruEntry | not-accessible | mandatory | An entry in the fruTable. |
| 1.3.6.1.4.1.42.2.28.2.2.3.2.1.1 | ColumnfruIndex | read-only | mandatory | A number referring to a specific FRU in the unit. |
| 1.3.6.1.4.1.42.2.28.2.2.3.2.1.2 | ColumnfruId | read-only | mandatory | The FRU id string. |
| 1.3.6.1.4.1.42.2.28.2.2.3.2.1.3 | ColumnfruType | read-only | mandatory | The FRU type. |
| 1.3.6.1.4.1.42.2.28.2.2.3.2.1.4 | ColumnfruStatus | read-only | mandatory | The FRU status. |
| 1.3.6.1.4.1.42.2.28.2.2.3.2.1.5 | ColumnfruState | read-only | mandatory | The FRU state. |
| 1.3.6.1.4.1.42.2.28.2.2.3.2.1.6 | ColumnfruVendor | read-only | mandatory | The FRU vendor id string. |
| 1.3.6.1.4.1.42.2.28.2.2.3.2.1.7 | ColumnfruModel | read-only | mandatory | The FRU model id string. |
| 1.3.6.1.4.1.42.2.28.2.2.3.2.1.8 | ColumnfruRevision | read-only | mandatory | The FRU revision string. |
| 1.3.6.1.4.1.42.2.28.2.2.3.2.1.9 | ColumnfruSerialNo | read-only | mandatory | The FRU serial number string. |
| 1.3.6.1.4.1.42.2.28.2.2.3.2.1.10 | ColumnfruErrors | read-only | mandatory | Not currently used. |
| 1.3.6.1.4.1.42.2.28.2.2.3.3 | ScalarfruDiskCount | read-only | mandatory | The number of disk FRUs in the system. |
| 1.3.6.1.4.1.42.2.28.2.2.3.4 | TablefruDiskTable | not-accessible | mandatory | A table of fruDiskEntry. |
| 1.3.6.1.4.1.42.2.28.2.2.3.4.1 | RowfruDiskEntry | not-accessible | mandatory | An entry on the fruDiskTable. |
| 1.3.6.1.4.1.42.2.28.2.2.3.4.1.1 | ColumnfruDiskRole | read-only | mandatory | The operational role of the disk FRU. |
| 1.3.6.1.4.1.42.2.28.2.2.3.4.1.2 | ColumnfruDiskPort1State | read-only | mandatory | The status of the disk FRU via the disk's interface port 1. |
| 1.3.6.1.4.1.42.2.28.2.2.3.4.1.3 | ColumnfruDiskPort2State | read-only | mandatory | The status of the disk FRU via the disk's interface port 2. |
| 1.3.6.1.4.1.42.2.28.2.2.3.4.1.4 | ColumnfruDiskCapacity | read-only | mandatory | The number of bytes/1,000,000 of storage on the disk FRU. |
| 1.3.6.1.4.1.42.2.28.2.2.3.4.1.5 | ColumnfruDiskStatusCode | read-only | mandatory | An ascii status code indicating the current state of the disk drive. 0 - Good drive, good sys area. 2 - Unable to open the drive. 3 - Indicates good drive, but… |
| 1.3.6.1.4.1.42.2.28.2.2.3.4.1.6 | ColumnfruDiskVolName | read-only | mandatory | The name string of the volume containing this disk FRU. |
| 1.3.6.1.4.1.42.2.28.2.2.3.4.1.7 | ColumnfruDiskTemp | read-only | mandatory | The temperature of the disk FRU (reported by the disk. |
| 1.3.6.1.4.1.42.2.28.2.2.3.5 | ScalarfruCtlrCount | read-only | mandatory | The number of controllers in the system. |
| 1.3.6.1.4.1.42.2.28.2.2.3.6 | TablefruCtlrTable | not-accessible | mandatory | A table of fruCtlrEntry. |
| 1.3.6.1.4.1.42.2.28.2.2.3.6.1 | RowfruCtlrEntry | not-accessible | mandatory | An entry in the fruCtlrTable. |
| 1.3.6.1.4.1.42.2.28.2.2.3.6.1.1 | ColumnfruCtlrCpuDesc | read-only | mandatory | A description of the controller CPU type. |
| 1.3.6.1.4.1.42.2.28.2.2.3.6.1.2 | ColumnfruCtlrRole | read-only | mandatory | The current operational role of this controller FRU. |
| 1.3.6.1.4.1.42.2.28.2.2.3.6.1.3 | ColumnfruCtlrPartnerId | read-only | mandatory | In a dual controller system, the partner controller's FRU id. |
| 1.3.6.1.4.1.42.2.28.2.2.3.6.1.4 | ColumnfruCtlrCtState | read-only | mandatory | The current state of the controller FRU. |
| 1.3.6.1.4.1.42.2.28.2.2.3.6.1.5 | ColumnfruCtlrCacheSize | read-only | mandatory | The cache size in bytes/1,000,000. |
| 1.3.6.1.4.1.42.2.28.2.2.3.6.1.6 | ColumnfruCtlrTemp | read-only | mandatory | The temperature of the controller card FRU. |
| 1.3.6.1.4.1.42.2.28.2.2.3.6.1.7 | ColumnfruCtlrMdate | read-only | mandatory | The date of the controller card's manufacture week. |
| 1.3.6.1.4.1.42.2.28.2.2.3.6.1.8 | ColumnfruCtlrConsoleBaud | read-only | mandatory | The controller FRU's console baud. |
| 1.3.6.1.4.1.42.2.28.2.2.3.7 | ScalarfruLoopCount | read-only | mandatory | The number of loop card FRUs in the system. |
| 1.3.6.1.4.1.42.2.28.2.2.3.8 | TablefruLoopTable | not-accessible | mandatory | A table of fruLoopEntry. |
| 1.3.6.1.4.1.42.2.28.2.2.3.8.1 | RowfruLoopEntry | not-accessible | mandatory | An entry in the fruLoopTable. |
| 1.3.6.1.4.1.42.2.28.2.2.3.8.1.1 | ColumnfruLoopMode | read-only | mandatory | The current operational mode of the loop card FRU. |
| 1.3.6.1.4.1.42.2.28.2.2.3.8.1.2 | ColumnfruLoopTemp | read-only | mandatory | The temperature of the loop card FRU. |
| 1.3.6.1.4.1.42.2.28.2.2.3.8.1.3 | ColumnfruLoopCable1State | read-only | mandatory | Indicates the presence of cable 1 on the loop card FRU. |
| 1.3.6.1.4.1.42.2.28.2.2.3.8.1.4 | ColumnfruLoopCable2State | read-only | mandatory | Indicates the presence of cable 2 on the loop card FRU. |
| 1.3.6.1.4.1.42.2.28.2.2.3.8.1.5 | ColumnfruLoopMdate | read-only | mandatory | The date of the loop card's manufacture week. |
| 1.3.6.1.4.1.42.2.28.2.2.3.9 | ScalarfruPowerCount | read-only | mandatory | The number of power/cooling FRUs in the system. |
| 1.3.6.1.4.1.42.2.28.2.2.3.10 | TablefruPowerTable | not-accessible | mandatory | A table of fruPowerEntry. |
| 1.3.6.1.4.1.42.2.28.2.2.3.10.1 | RowfruPowerEntry | not-accessible | mandatory | An entry in the fruPowerTable. |
| 1.3.6.1.4.1.42.2.28.2.2.3.10.1.1 | ColumnfruPowerPowOutput | read-only | mandatory | The current power output state of the power/cooling FRU. |
| 1.3.6.1.4.1.42.2.28.2.2.3.10.1.2 | ColumnfruPowerPowSource | read-only | mandatory | The current power input source of the power/cooling FRU. |
| 1.3.6.1.4.1.42.2.28.2.2.3.10.1.3 | ColumnfruPowerPowTemp | read-only | mandatory | The current power temperature state of the power/cooling FRU. |
| 1.3.6.1.4.1.42.2.28.2.2.3.10.1.4 | ColumnfruPowerFan1State | read-only | mandatory | The current state of fan 1 in the power/cooling FRU. |
| 1.3.6.1.4.1.42.2.28.2.2.3.10.1.5 | ColumnfruPowerFan2State | read-only | mandatory | The current state of fan 2 in the power/cooling FRU. |
| 1.3.6.1.4.1.42.2.28.2.2.3.10.1.6 | ColumnfruPowerBatState | read-only | mandatory | The current charge state of the battery in the power/cooling FRU. |
| 1.3.6.1.4.1.42.2.28.2.2.3.10.1.7 | ColumnfruPowerBatLife | read-only | mandatory | The expected life of the battery within the power/cooling FRU (in hours). |
| 1.3.6.1.4.1.42.2.28.2.2.3.10.1.8 | ColumnfruPowerBatUsed | read-only | mandatory | The number of hours of life used by the battery within the power/cooling FRU. |
| 1.3.6.1.4.1.42.2.28.2.2.3.10.1.9 | ColumnfruPowerPowMdate | read-only | mandatory | The date of the power/cooling unit's manufacture week. |
| 1.3.6.1.4.1.42.2.28.2.2.3.10.1.10 | ColumnfruPowerBatMdate | read-only | mandatory | The date of the battery's manufacture week. |
| 1.3.6.1.4.1.42.2.28.2.2.3.11 | ScalarfruMidplaneCount | read-only | mandatory | The number of midplane FRUs in the system. |
| 1.3.6.1.4.1.42.2.28.2.2.3.12 | TablefruMidplaneTable | not-accessible | mandatory | A table of fruMidplaneEntry. |
| 1.3.6.1.4.1.42.2.28.2.2.3.12.1 | RowfruMidplaneEntry | not-accessible | mandatory | An entry in the fruMidplaneTable. |
| 1.3.6.1.4.1.42.2.28.2.2.3.12.1.1 | ColumnfruMidplaneMdate | read-only | mandatory | The date of the midplane's manufacture week. |
| 1.3.6.1.4.1.42.2.28.2.2.4 | Nodet300VolumeObjs | |||
| 1.3.6.1.4.1.42.2.28.2.2.4.1 | ScalarvolCount | read-only | mandatory | The number of volumes created in the system. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2 | TablevolTable | not-accessible | mandatory | A table of volEntry. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1 | RowvolEntry | not-accessible | mandatory | An entry in volTable. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.1 | ColumnvolIndex | read-only | mandatory | A number referring to a specific volume in the system. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.2 | ColumnvolId | read-only | mandatory | The volume id string. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.3 | ColumnvolName | read-only | mandatory | A user-writable volume name string. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.4 | ColumnvolWWN | read-only | mandatory | The volume World Wide Name. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.5 | ColumnvolStatus | read-only | mandatory | The current volume status. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.6 | ColumnvolCacheMode | read-only | mandatory | The current buffer cache mode in effect for this volume. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.7 | ColumnvolCacheMirror | read-only | mandatory | The current buffer cache mirror mode in effect for this volume. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.8 | ColumnvolCapacity | read-only | mandatory | The number of bytes/1,000,000 of user storage in the volume. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.9 | ColumnvolArrayWidth | read-only | mandatory | The number of drives in the volume (not including the standby drive). |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.10 | ColumnvolRaidLevel | read-only | mandatory | The RAID organization of the volume. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.11 | ColumnvolWriteRequests | read-only | mandatory | The current number of write requests received for this volume. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.12 | ColumnvolReadRequests | read-only | mandatory | The current number of read requests received for this volume. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.13 | ColumnvolBlocksWritten | read-only | mandatory | The current number of blocks written (received for) this volume. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.14 | ColumnvolBlocksRead | read-only | mandatory | The current number of blocks read (transmitted for) this volume. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.15 | ColumnvolSoftErrors | read-only | mandatory | The number of soft errors on this volume. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.16 | ColumnvolFirmErrors | read-only | mandatory | The number of firm errors on this volume. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.17 | ColumnvolHardErrors | read-only | mandatory | The number of hard errors on this volume. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.18 | ColumnvolCacheWriteHits | read-only | mandatory | The current number of blocks in the cache re-written to this volume before the previous contents have been written to. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.19 | ColumnvolCacheWriteMisses | read-only | mandatory | The current number of blocks read from the cache. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.20 | ColumnvolCacheReadHits | read-only | mandatory | The current number of blocks read from cache by this volume. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.21 | ColumnvolCacheReadMisses | read-only | mandatory | The current number of blocks read from this volume to the cache. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.22 | ColumnvolCacheRmwFlushes | read-only | mandatory | The current number of read-modify-write stripe operations executed by cache flush to this volume. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.23 | ColumnvolCacheReconFlushes | read-only | mandatory | The current number of reconstruct-write stripe operations executed by cache flush to this volume. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.24 | ColumnvolCacheStripeFlushes | read-only | mandatory | The current number of stripe-write operations executed by cache flush to this volume. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.25 | ColumnvolDisabledDisk | read-only | mandatory | The FRU id string of the disabled disk in the volume. No value if there is none. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.26 | ColumnvolSubstitutedDisk | read-only | mandatory | The FRU id string of the substituted disk in the volume. No value if there is none. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.27 | ColumnvolOper | read-only | mandatory | The current volume operation in progress. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.28 | ColumnvolOperProgress | read-only | mandatory | The current volume operation progress expressed as a percentage of completion. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.29 | ColumnvolInitRate | read-only | mandatory | The current volume initialize rate. |
| 1.3.6.1.4.1.42.2.28.2.2.4.2.1.30 | ColumnvolVerifyRate | read-only | mandatory | The current volume verify rate. |
| 1.3.6.1.4.1.42.2.28.2.2.5 | Nodet300PortObjs | |||
| 1.3.6.1.4.1.42.2.28.2.2.5.1 | ScalarportCount | read-only | mandatory | The number of ports in the system. |
| 1.3.6.1.4.1.42.2.28.2.2.5.2 | TableportTable | not-accessible | mandatory | A table of portEntry. |
| 1.3.6.1.4.1.42.2.28.2.2.5.2.1 | RowportEntry | not-accessible | mandatory | An entry in portTable |
| 1.3.6.1.4.1.42.2.28.2.2.5.2.1.1 | ColumnportIndex | read-only | mandatory | A number referring to a specific port in the system. |
| 1.3.6.1.4.1.42.2.28.2.2.5.2.1.2 | ColumnportId | read-only | mandatory | The port id string. |
| 1.3.6.1.4.1.42.2.28.2.2.5.2.1.3 | ColumnportType | read-only | mandatory | The current port type. |
| 1.3.6.1.4.1.42.2.28.2.2.5.2.1.4 | ColumnportFruId | read-only | mandatory | The controller FRU id string which contains this port. |
| 1.3.6.1.4.1.42.2.28.2.2.5.2.1.5 | ColumnportWriteRequests | read-only | mandatory | The current number of write requests received from this port. |
| 1.3.6.1.4.1.42.2.28.2.2.5.2.1.6 | ColumnportReadRequests | read-only | mandatory | The current number of read requests received from this port. |
| 1.3.6.1.4.1.42.2.28.2.2.5.2.1.7 | ColumnportBlocksWritten | read-only | mandatory | The current number of blocks written (received from) this host port. |
| 1.3.6.1.4.1.42.2.28.2.2.5.2.1.8 | ColumnportBlocksRead | read-only | mandatory | The current number of blocks read (transmitted to) this host port. |
| 1.3.6.1.4.1.42.2.28.2.2.5.2.1.9 | ColumnportSunHost | read-only | mandatory | A flag indicating whether this port is connected to a Sun host. |
| 1.3.6.1.4.1.42.2.28.2.2.5.2.1.10 | ColumnportWWN | read-only | mandatory | The port World Wide Name. |
| 1.3.6.1.4.1.42.2.28.2.2.5.2.1.11 | ColumnportStatus | read-only | mandatory | The current port status. |
| 1.3.6.1.4.1.42.2.28.2.2.5.2.1.12 | ColumnportErrors | read-only | mandatory | Not currently used. |
| 1.3.6.1.4.1.42.2.28.2.2.5.3 | ScalarportFibreCount | read-only | mandatory | The number of Fibre Channel ports in this unit. |
| 1.3.6.1.4.1.42.2.28.2.2.5.4 | TableportFibreTable | not-accessible | mandatory | A table of portEntrys. |
| 1.3.6.1.4.1.42.2.28.2.2.5.4.1 | RowportFibreEntry | not-accessible | mandatory | An entry in the portFibreTable. |
| 1.3.6.1.4.1.42.2.28.2.2.5.4.1.1 | ColumnportFibreAlpaMode | read-only | mandatory | The ALPA mode of the port. |
| 1.3.6.1.4.1.42.2.28.2.2.5.4.1.2 | ColumnportFibreAlpa | read-only | mandatory | The ALPA of the port when the ALPA mode is 'hard'. |
| 1.3.6.1.4.1.42.2.28.2.2.6 | Nodet300AttachObjs | |||
| 1.3.6.1.4.1.42.2.28.2.2.6.1 | ScalarattachCount | read-only | mandatory | The number of active lun attachments in the system. |
| 1.3.6.1.4.1.42.2.28.2.2.6.2 | TableattachTable | not-accessible | mandatory | A table of attachEntry. |
| 1.3.6.1.4.1.42.2.28.2.2.6.2.1 | RowattachEntry | not-accessible | mandatory | An entry in the attachTable. |
| 1.3.6.1.4.1.42.2.28.2.2.6.2.1.1 | ColumnattachIndex | read-only | mandatory | A number referring to a specific active lun attachment. |
| 1.3.6.1.4.1.42.2.28.2.2.6.2.1.2 | ColumnattachLun | read-only | mandatory | The lun number assigned to this attachment. |
| 1.3.6.1.4.1.42.2.28.2.2.6.2.1.3 | ColumnattachMode | read-only | mandatory | The mode of this attachment. |
| 1.3.6.1.4.1.42.2.28.2.2.6.2.1.4 | ColumnattachVolId | read-only | mandatory | The volume id string of the volume associated with this attachment. |
| 1.3.6.1.4.1.42.2.28.2.2.6.2.1.5 | ColumnattachVolName | read-only | mandatory | The volume name string of the volume associated with this attachment. |
| 1.3.6.1.4.1.42.2.28.2.2.6.2.1.6 | ColumnattachVolOwner | read-only | mandatory | The unit id of the owner of the volume associated with this attachment. |
| 1.3.6.1.4.1.42.2.28.2.2.7 | Nodet300LoopObjs | |||
| 1.3.6.1.4.1.42.2.28.2.2.7.1 | ScalarloopCount | read-only | mandatory | The number of back-end loops in the system. |
| 1.3.6.1.4.1.42.2.28.2.2.7.2 | TableloopTable | not-accessible | mandatory | A table of loopEntry. |
| 1.3.6.1.4.1.42.2.28.2.2.7.2.1 | RowloopEntry | not-accessible | mandatory | An entry in loopTable. |
| 1.3.6.1.4.1.42.2.28.2.2.7.2.1.1 | ColumnloopIndex | read-only | mandatory | A number referring to a specific back-end loop. |
| 1.3.6.1.4.1.42.2.28.2.2.7.2.1.2 | ColumnloopId | read-only | mandatory | The loop id string. |
| 1.3.6.1.4.1.42.2.28.2.2.7.2.1.3 | ColumnloopStatus | read-only | mandatory | The current loop status. |
| 1.3.6.1.4.1.42.2.28.2.2.7.2.1.4 | ColumnloopMux | read-only | mandatory | The current loop configuration. |
| 1.3.6.1.4.1.42.2.28.2.2.8 | Nodet300LogObjs | |||
| 1.3.6.1.4.1.42.2.28.2.2.8.1 | ScalarlogStatus | read-only | mandatory | A flag indicating whether syslogd is enabled. |
| 1.3.6.1.4.1.42.2.28.2.2.8.2 | ScalarlogTo | read-only | mandatory | Indicates system log messaging routing. |
| 1.3.6.1.4.1.42.2.28.2.2.8.3 | ScalarlogFile | read-only | mandatory | The name of the log file. |
| 1.3.6.1.4.1.42.2.28.2.2.8.4 | ScalarlogLevel | read-only | mandatory | Filters generation of system messages. |
| 1.3.6.1.4.1.42.2.28.2.2.8.5 | ScalarlogPort | read-only | mandatory | The UDP port to use when forwarding syslogd messages to other hosts. |
| 1.3.6.1.4.1.42.2.28.2.2.9 | Nodet300OndgObjs | |||
| 1.3.6.1.4.1.42.2.28.2.2.9.1 | ScalarondgOper | read-only | mandatory | The current back-end loop diagnostic operation in progress. |
| 1.3.6.1.4.1.42.2.28.2.2.9.2 | ScalarondgOperPending | read-only | mandatory | Specifies whether an ONDG operation is in progress. |
| 1.3.6.1.4.1.42.2.28.2.2.9.3 | ScalarondgOperProgress | read-only | mandatory | The current back-end loop diagnostic operation progress expressed as a percentage of completion. |
| 1.3.6.1.4.1.42.2.28.2.2.9.4 | ScalarondgError | read-only | mandatory | A string representing the completion status of the last ondg method invoked. |
| 1.3.6.1.4.1.42.2.28.2.2.9.5 | ScalarondgId | read-only | mandatory | The unique sequence number for each OFDG test run. |
| 1.3.6.1.4.1.42.2.28.2.3 | Nodet300Events | |||
| 1.3.6.1.4.1.42.2.28.2.3.0 | Nodet300EventsV2 | |||
| 1.3.6.1.4.1.42.2.28.2.3.1 | NodesysMessage | Trap for sysLastMessage (last syslog message). |