A3COM-PRIVATE-MIB
166 objects
The management information definitions for the 3COM AP-PRIVATE-MIB.
Imported Objects
| RFC1155-SMI | Counter enterprises IpAddress mgmt |
| RFC1213-MIB | ifIndex |
| SNMPv2-SMI | Counter32 Integer32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43 | Nodea3Com | |||
| 1.3.6.1.4.1.43.35 | Nodewlan-mib | |||
| 1.3.6.1.4.1.43.35.8 | Identityrivet | The management information definitions for the 3COM AP-PRIVATE-MIB. | ||
| 1.3.6.1.4.1.43.35.8.1 | NodeenterpriseApSys | |||
| 1.3.6.1.4.1.43.35.8.1.1 | ScalarswHardwareVer | read-only | current | Hardware version of the main board. |
| 1.3.6.1.4.1.43.35.8.1.2 | ScalarswBootRomVer | read-only | current | Boot ROM code version of the main board. |
| 1.3.6.1.4.1.43.35.8.1.3 | ScalarswOpCodeVer | read-only | current | Operation code version of the main board. |
| 1.3.6.1.4.1.43.35.8.1.4 | ScalarswSerialNumber | read-only | current | Serial Number of the Access Point. |
| 1.3.6.1.4.1.43.35.8.2 | NodeenterpriseApLineMgnt | |||
| 1.3.6.1.4.1.43.35.8.2.1 | TablelineTable | not-accessible | current | Table of descriptive and status information about configuration of each RS-232 line in this system |
| 1.3.6.1.4.1.43.35.8.2.1.1 | RowlineEntry | not-accessible | current | An entry in the table, containing information about configuration in one RS232 line of the Access Point. |
| 1.3.6.1.4.1.43.35.8.2.1.1.1 | ColumnlineIndex | not-accessible | current | This is defined as RS-232 index. |
| 1.3.6.1.4.1.43.35.8.2.1.1.2 | ColumnlineDataBits | read-only | current | This is defined as number of data bits for the RS232 interface. |
| 1.3.6.1.4.1.43.35.8.2.1.1.3 | ColumnlineParity | read-only | current | This is defined as parity of the RS232 interface. |
| 1.3.6.1.4.1.43.35.8.2.1.1.4 | ColumnlineSpeed | read-only | current | This is defined as the speed of the RS-232 interface. |
| 1.3.6.1.4.1.43.35.8.2.1.1.5 | ColumnlineStopBits | read-only | current | This is defined as the number of stop bits for the RS-232 interface. |
| 1.3.6.1.4.1.43.35.8.3 | NodeenterpriseApPortMgnt | |||
| 1.3.6.1.4.1.43.35.8.3.1 | TableportTable | not-accessible | current | Table of descriptive and status information about configuration of each switch port (including expansion slot) in this system. This table also contains informa… |
| 1.3.6.1.4.1.43.35.8.3.1.1 | RowportEntry | not-accessible | current | An entry in the table, containing information about configuration in one switch port of the switch. |
| 1.3.6.1.4.1.43.35.8.3.1.1.1 | ColumnportIndex | not-accessible | current | This is defined as ifIndex in the IF-MIB. |
| 1.3.6.1.4.1.43.35.8.3.1.1.2 | ColumnportName | read-only | current | Indicates the port name. This is same as ifAlias in the IF-MIB (RFC2863 or later). |
| 1.3.6.1.4.1.43.35.8.3.1.1.3 | ColumnportType | read-only | current | Indicates the port type. |
| 1.3.6.1.4.1.43.35.8.3.1.1.4 | ColumnportSpeedDpxCfg | read-only | current | Set the port speed and duplex mode as follows: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex mode halfDuplex100(4) - 1… |
| 1.3.6.1.4.1.43.35.8.3.1.1.5 | ColumnportFlowCtrlCfg | read-only | current | (1) Flow control mechanism is enabled. If the port type is hundredBaseTX or thousandBaseSX: When the port is operating in halfDuplex mode, the port uses backPr… |
| 1.3.6.1.4.1.43.35.8.3.1.1.6 | ColumnportCapabilities | read-only | current | Port capabilities. |
| 1.3.6.1.4.1.43.35.8.3.1.1.7 | ColumnportAutonegotiation | read-only | current | Whether autonegotiation is enabled. |
| 1.3.6.1.4.1.43.35.8.3.1.1.8 | ColumnportSpeedDpxStatus | read-only | current | The operating speed and duplex mode of the switched port. If this index is a trunk, the speed is the speed of its individual members. If this index is a trunk … |
| 1.3.6.1.4.1.43.35.8.3.1.1.9 | ColumnportFlowCtrlStatus | read-only | current | (2) BackPressure flow control machanism is used. (3) IEEE 802.3 flow control machanism is used. (4) Flow control mechanism is disabled. If this index is a trun… |
| 1.3.6.1.4.1.43.35.8.4 | NodeenterpriseApFileTransferMgt | |||
| 1.3.6.1.4.1.43.35.8.4.1 | ScalartransferType | read-write | current | Type of file to transfer. |
| 1.3.6.1.4.1.43.35.8.4.2 | ScalarfileType | read-write | current | Type of file to transfer. |
| 1.3.6.1.4.1.43.35.8.4.3 | ScalarsrcFile | read-write | current | The source file name for TFTP transfer when a transfer is next requested via this MIB. This value is set to the zero length string when no file name has been s… |
| 1.3.6.1.4.1.43.35.8.4.4 | ScalardestFile | read-write | current | The destination file name for TFTP transfer when a transfer is next requested via this MIB. This value is set to the zero length string when no file name has b… |
| 1.3.6.1.4.1.43.35.8.4.5 | ScalarfileServer | read-write | current | The IP address of the TFTP server for transfer when a download is next requested via this MIB. This value is set to `0.0.0.0' when no IP address has been speci… |
| 1.3.6.1.4.1.43.35.8.4.6 | ScalaruserName | read-write | current | The username specified for an FTP Transfer. |
| 1.3.6.1.4.1.43.35.8.4.7 | Scalarpassword | read-write | current | The password specified for an FTP Transfer. |
| 1.3.6.1.4.1.43.35.8.4.8 | Scalarstatus | read-only | current | The status of the transfer. |
| 1.3.6.1.4.1.43.35.8.4.9 | ScalartransferStart | read-write | current | To start a transfer. |
| 1.3.6.1.4.1.43.35.8.5 | NodeenterpriseApResetMgt | |||
| 1.3.6.1.4.1.43.35.8.5.1 | ScalarrestartOpCodeFile | read-write | current | Name of op-code file for start-up. |
| 1.3.6.1.4.1.43.35.8.5.2 | ScalarrestartControl | read-write | current | Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. Se… |
| 1.3.6.1.4.1.43.35.8.6 | NodeenterpriseApIpMgt | |||
| 1.3.6.1.4.1.43.35.8.6.1 | ScalarnetConfigIPAddress | read-write | current | The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then w… |
| 1.3.6.1.4.1.43.35.8.6.2 | ScalarnetConfigSubnetMask | read-write | current | The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the netConfigIPAddress or netConfigSubnetMask are 0.0.0.0, then … |
| 1.3.6.1.4.1.43.35.8.6.3 | ScalarnetConfigDefaultGateway | read-write | current | The IP Address of the default gateway. If this value is undefined or unknown, it shall have the value 0.0.0.0. |
| 1.3.6.1.4.1.43.35.8.6.4 | ScalarnetConfigHttpState | read-write | current | Whether HTTP is enabled. |
| 1.3.6.1.4.1.43.35.8.6.5 | ScalarnetConfigHttpPort | read-write | current | The port number for HTTP. Default value is 80. |
| 1.3.6.1.4.1.43.35.8.6.6 | ScalarnetConfigHttpsState | read-write | current | Whether Secure HTTP is enabled. |
| 1.3.6.1.4.1.43.35.8.6.7 | ScalarnetConfigHttpsPort | read-write | current | The port number for Secure HTTP. Default value is 443. |
| 1.3.6.1.4.1.43.35.8.6.8 | ScalarnetConfigDHCPState | read-write | current | Whether DHCP is enabled. |
| 1.3.6.1.4.1.43.35.8.7 | NodeenterpriseAPdot11 | |||
| 1.3.6.1.4.1.43.35.8.7.5 | Nodedot11AuthenticationEntry | |||
| 1.3.6.1.4.1.43.35.8.7.5.1 | Scalardot118021xState | read-write | current | This attribute indicates that the Enterprise the state of the 802.1x authentication algorithm. |
| 1.3.6.1.4.1.43.35.8.7.5.2 | Scalardot118021xBroadcastKeyRefreshRate | read-write | current | The number (in minutes) between changing the broadcast key for 802.1x and WPA clients |
| 1.3.6.1.4.1.43.35.8.7.5.3 | Scalardot118021xSessionKeyRefreshRate | read-write | current | The number (in minutes) between changing session keys for 802.1x and WPA clients |
| 1.3.6.1.4.1.43.35.8.7.5.4 | Scalardot118021xReauthenticationTimeout | read-write | current | The number (in minutes) between forcing 802.1x clients to reauthenticate |
| 1.3.6.1.4.1.43.35.8.7.5.5 | Scalardot11MACAuthenticationType | read-write | current | This value indicates the type of mac authentication in use. |
| 1.3.6.1.4.1.43.35.8.7.6 | Tabledot11AuthenticationServerTable | not-accessible | current | Table of descriptive and status information about configuration of each authentication server. |
| 1.3.6.1.4.1.43.35.8.7.6.1 | Rowdot11AuthenticationServerEntry | not-accessible | current | An entry in the table, containing information about configuration of one authentication server of the AP. |
| 1.3.6.1.4.1.43.35.8.7.6.1.1 | Columndot11AuthenticationServerIndex | not-accessible | current | Index of the Authentication Server |
| 1.3.6.1.4.1.43.35.8.7.6.1.2 | Columndot11AuthenticationServer | read-write | current | This value indicates the IP address of the authentication server. |
| 1.3.6.1.4.1.43.35.8.7.6.1.3 | Columndot11AuthenticationPort | read-write | current | This value indicates the UDP Port used by the authentication server. |
| 1.3.6.1.4.1.43.35.8.7.6.1.4 | Columndot11AuthenticationKey | read-write | current | This value indicates the shared key used by the authentication server. |
| 1.3.6.1.4.1.43.35.8.7.6.1.5 | Columndot11AuthenticationRetransmit | read-write | current | This value indicates the retransmit timer length used by the authentication server. |
| 1.3.6.1.4.1.43.35.8.7.6.1.6 | Columndot11AuthenticationTimeout | read-write | current | This value indicates the Timeout value(sec) used by the authentication server. |
| 1.3.6.1.4.1.43.35.8.7.6.1.7 | Columndot11AuthenticationAcctPort | read-write | current | The port number for radius server accounting. |
| 1.3.6.1.4.1.43.35.8.7.6.1.8 | Columndot11AuthenticationInterimUpdate | read-write | current | This value indicates the Timeout value(sec) used by the radius server interim update. |
| 1.3.6.1.4.1.43.35.8.7.7 | Nodedot11Filter | |||
| 1.3.6.1.4.1.43.35.8.7.7.1 | Scalardot11FilterDefault | read-write | current | This value indicates the default access for local mac filters. |
| 1.3.6.1.4.1.43.35.8.7.7.2 | Tabledot11FilterTable | not-accessible | current | Table of status information about each configured MAC Address Filtering Entry. |
| 1.3.6.1.4.1.43.35.8.7.7.2.1 | Rowdot11FilterEntry | not-accessible | current | An entry in the table, containing information about configuration in one radio of the AP. |
| 1.3.6.1.4.1.43.35.8.7.7.2.1.1 | Columndot11FilterAddress | not-accessible | current | This value indicates the MAC address of the filter entry. |
| 1.3.6.1.4.1.43.35.8.7.7.2.1.2 | Columndot11FilterStatus | read-write | current | This value indicates the Status of the filter entry. Ifallowed, the client is allowed access to the network. If disallowed, the no frames will be forwarded to … |
| 1.3.6.1.4.1.43.35.8.7.8 | Tabledot11AuthenticationSupplicantTable | not-accessible | current | Table of descriptive and status information about configuration of supplicant |
| 1.3.6.1.4.1.43.35.8.7.8.1 | Rowdot11AuthenticationSupplicantEntry | not-accessible | current | An entry in the table, containing information about configuration of one supplicant. |
| 1.3.6.1.4.1.43.35.8.7.8.1.1 | Columndot118021xSuppIndex | not-accessible | current | Index of the interface for which this supplicant is running. Currently only the ethernet interface. |
| 1.3.6.1.4.1.43.35.8.7.8.1.2 | Columndot118021xSuppState | read-write | current | This object is used to enable or disable the 802.1x supplicant. |
| 1.3.6.1.4.1.43.35.8.7.8.1.3 | Columndot118021xSuppUser | read-write | current | This value indicates the username for supplicant. If value is configured, will display ****. Else will display EMPTY. |
| 1.3.6.1.4.1.43.35.8.7.8.1.4 | Columndot118021xSuppPasswd | read-write | current | This value indicates the password for supplicant. If value is configured, will display ****. Else will display EMPTY. |
| 1.3.6.1.4.1.43.35.8.8 | NodeenterpriseApAdmin | |||
| 1.3.6.1.4.1.43.35.8.8.1 | ScalarenterpriseApAdminUser | read-write | current | This value indicates the username for management login. |
| 1.3.6.1.4.1.43.35.8.8.2 | ScalarenterpriseApAdminPassword | read-write | current | This value indicates the password for management login. Accept empty string to remove the password. |
| 1.3.6.1.4.1.43.35.8.9 | NodeenterpriseApSecurity | |||
| 1.3.6.1.4.1.43.35.8.9.1 | TableenterpriseApSecurityTable | not-accessible | current | Table of descriptive and status information about configuration of each radio in terms of security settings. |
| 1.3.6.1.4.1.43.35.8.9.1.1 | RowenterpriseApSecurityEntry | not-accessible | current | An entry in the table, containing information about configuration of one radio of the AP. |
| 1.3.6.1.4.1.43.35.8.9.1.1.1 | ColumnenterpriseApSecurityIndex | not-accessible | current | Radio Index for security settings. |
| 1.3.6.1.4.1.43.35.8.9.1.1.2 | ColumnenterpriseApSecurityAuthType | read-write | current | This value indicates the type of authentication in use for this radio interface. |
| 1.3.6.1.4.1.43.35.8.9.1.1.3 | ColumnenterpriseApSecuritySharedKeyLen | read-only | current | This value indicates the shared key length for this radio interface. |
| 1.3.6.1.4.1.43.35.8.9.1.1.4 | ColumnenterpriseApSecurityWPAMode | read-write | current | This value indicates the state of WPA for this radio interface. |
| 1.3.6.1.4.1.43.35.8.9.1.1.5 | ColumnenterpriseApSecurityWPAKeyType | read-write | current | This value indicates the type of WPA Key Management in use for this radio interface. |
| 1.3.6.1.4.1.43.35.8.9.1.1.6 | ColumnenterpriseApSecurityWPACipher | read-write | current | This value indicates the type of WPA Cipher in use for this radio interface. |
| 1.3.6.1.4.1.43.35.8.9.1.1.7 | ColumnenterpriseApSecurityWPAPSKType | read-write | current | This value indicates the type of WPA Pre Shared Key in use for this radio interface. |
| 1.3.6.1.4.1.43.35.8.9.1.1.8 | ColumnenterpriseApSecurityWPAPSK | read-write | current | This value indicates WPA Pre Shared Key in use for this radio interface. |
| 1.3.6.1.4.1.43.35.8.9.1.1.9 | ColumnenterpriseApSecurityWEPKeyType | read-write | current | This value indicates the type of WEP Key in use for this radio interface. |
| 1.3.6.1.4.1.43.35.8.9.1.1.10 | ColumnenterpriseApSecurityWEPEnabled | read-write | current | This value indicates whether WEP is enabled. |
| 1.3.6.1.4.1.43.35.8.10 | NodeenterpriseApRadio | |||
| 1.3.6.1.4.1.43.35.8.10.1 | TableenterpriseApRadioTable | not-accessible | current | Table of descriptive and status information about configuration of each radio. |
| 1.3.6.1.4.1.43.35.8.10.1.1 | RowenterpriseApRadioEntry | not-accessible | current | An entry in the table, containing information about configuration of one radio of the AP. |
| 1.3.6.1.4.1.43.35.8.10.1.1.1 | ColumnenterpriseApRadioIndex | not-accessible | current | Radio Index for configuration. |
| 1.3.6.1.4.1.43.35.8.10.1.1.2 | ColumnenterpriseApRadioAutoChannel | read-write | current | This value indicates whether auto channel selection is enabled or not for this radio interface |
| 1.3.6.1.4.1.43.35.8.10.1.1.3 | ColumnenterpriseApRadioTransmitPower | read-write | current | This value indicates the transmit power for this radio interface. |
| 1.3.6.1.4.1.43.35.8.10.1.1.4 | ColumnenterpriseApRadioTurboMode | read-write | current | This value indicates whether turbo mode is enabled for this radio interface. |
| 1.3.6.1.4.1.43.35.8.10.1.1.5 | ColumnenterpriseApRadioDataRate | read-write | current | This value indicates the data rate for this radio interface. Radio interface A operates at 6, 9, 12, 18, 24, 36, 48, 54. Radio interface G operates all listed … |
| 1.3.6.1.4.1.43.35.8.10.1.1.6 | ColumnenterpriseApRadioGMode | read-write | current | This value indicates the radio mode for the 802.11g radio. This setting is only valid for the 802.11g interface. |
| 1.3.6.1.4.1.43.35.8.10.1.1.7 | ColumnenterpriseApRadioAntennaMode | read-write | current | This value indicates the antenna mode in use for the G-radio. The values are interpreted as follows: both(1) means use both built-in antennas, left(2) means us… |
| 1.3.6.1.4.1.43.35.8.10.1.1.8 | ColumnrogueApState | read-write | current | This value is used to enable/disable Rogue Ap Detection for this radio interface. |
| 1.3.6.1.4.1.43.35.8.10.1.1.9 | ColumnrogueApInterval | read-write | current | How often to scan for Rogue Aps. The interval in minutes, with default of 720(minutes). |
| 1.3.6.1.4.1.43.35.8.10.1.1.10 | ColumnrogueApDuration | read-write | current | How long to scan each channel (in milliseconds). A longer duration will yield more complete results. A shorter duration will allow clients a better chance of r… |
| 1.3.6.1.4.1.43.35.8.10.1.1.11 | ColumnrogueApScanNow | read-write | current | When writing the value to enable, the AP will trigger the Rouge AP scan function. The value will always return disable(2). |
| 1.3.6.1.4.1.43.35.8.10.2 | TableenterpriseApVapRadioTable | not-accessible | current | Table of descriptive and status information about configuration of each Vap radio. |
| 1.3.6.1.4.1.43.35.8.10.2.1 | RowenterpriseApVapRadioEntry | not-accessible | current | An entry in the table, containing information about configuration of one Vap radio of the AP. |
| 1.3.6.1.4.1.43.35.8.10.2.1.1 | ColumnenterpriseApVapRadioIndex | not-accessible | current | Radio Index for configuration. |
| 1.3.6.1.4.1.43.35.8.10.2.1.2 | ColumnenterpriseApVapRadioState | read-write | current | This value indicates the state of the radio interface. |
| 1.3.6.1.4.1.43.35.8.10.2.1.3 | ColumnenterpriseApVapRadioClosedSystem | read-write | current | This value indicates whether closed system is enabled for this radio interface. |
| 1.3.6.1.4.1.43.35.8.10.2.1.4 | ColumnenterpriseApVapRadioMaxAssoc | read-write | current | This value indicates the max number of clients allowed on this radio interface. |
| 1.3.6.1.4.1.43.35.8.10.2.1.5 | ColumnenterpriseApVapRadioTransmitKey | read-write | current | This value indicates default transmit key in use for this radio interface. |
| 1.3.6.1.4.1.43.35.8.10.2.1.6 | ColumnenterpriseApVapRadioDescription | read-write | current | This value indicates the description for this radio interface. |
| 1.3.6.1.4.1.43.35.8.10.3 | TableradioWdsTable | not-accessible | current | Table of configuration information for Wds for each Radio interface. |
| 1.3.6.1.4.1.43.35.8.10.3.1 | RowradioWdsEntry | not-accessible | current | An entry in the table, containing information about configuration of peer Bridging for one radio of the AP. The table is indexed by radio Index (corresponding … |
| 1.3.6.1.4.1.43.35.8.10.3.1.1 | ColumnwdsApRole | read-write | current | This value indicates the role of the Ap for this radio: normal operation(1), bridge master(2) which accepts only repeaters to associate with, repeater Ap(3) th… |
| 1.3.6.1.4.1.43.35.8.10.4 | TableradioWdsPeerTable | not-accessible | current | Table of configuration information for Wds Peers for each Radio interface. |
| 1.3.6.1.4.1.43.35.8.10.4.1 | RowradioWdsPeerEntry | not-accessible | current | An entry in the table, containing information about configuration of peer Bridging for one radio of the AP. The table is indexed by radio Index (corresponding … |
| 1.3.6.1.4.1.43.35.8.10.4.1.1 | ColumnwdsPeerIndex | not-accessible | current | Peer Index for the radio interface. |
| 1.3.6.1.4.1.43.35.8.10.4.1.2 | ColumnwdsPeerBssid | read-write | current | The BSSID for this peer. |
| 1.3.6.1.4.1.43.35.8.11 | NodeenterpriseApWebRedirection | |||
| 1.3.6.1.4.1.43.35.8.11.1 | ScalarwebRedirectionEnabled | read-write | current | Whether Web Redirection is enabled. |
| 1.3.6.1.4.1.43.35.8.12 | NodeenterpriseApProxyArp | |||
| 1.3.6.1.4.1.43.35.8.12.1 | ScalarproxyArpEnabled | read-write | current | Whether ProxyArp is enabled. |
| 1.3.6.1.4.1.43.35.8.13 | NodeenterpriseApRogueAp | |||
| 1.3.6.1.4.1.43.35.8.13.1 | TablerogueApDetectionTable | not-accessible | current | Table of each AP that has been detected. |
| 1.3.6.1.4.1.43.35.8.13.1.1 | RowrogueApEntry | not-accessible | current | An entry in the table, containing information about any AP detected. |
| 1.3.6.1.4.1.43.35.8.13.1.1.1 | ColumnrogueApIndex | not-accessible | current | Monotonically increasing index. |
| 1.3.6.1.4.1.43.35.8.13.1.1.2 | ColumnrogueApBssid | read-only | current | The AP BSSID |
| 1.3.6.1.4.1.43.35.8.13.1.1.3 | ColumnrogueApSsid | read-only | current | The AP SSID |
| 1.3.6.1.4.1.43.35.8.13.1.1.4 | ColumnrogueApPortNumber | read-only | current | Interface index for the radio. |
| 1.3.6.1.4.1.43.35.8.13.1.1.5 | ColumnrogueApChannelNumber | read-only | current | Channel where Ap detected. |
| 1.3.6.1.4.1.43.35.8.13.1.1.6 | ColumnrogueApRSSIValue | read-only | current | RSSI for AP detected. |
| 1.3.6.1.4.1.43.35.8.100 | NodeapNotificationTrapTree | |||
| 1.3.6.1.4.1.43.35.8.100.1 | NodeapNotificationObjects | |||
| 1.3.6.1.4.1.43.35.8.100.1.1 | ScalarapNotificationDot11MacAddr | not-accessible | current | Mac Address of the affected interface, returned with traps only. |
| 1.3.6.1.4.1.43.35.8.100.1.2 | ScalarapNotificationDot11Station | not-accessible | current | This attribute holds the MAC address of the wireless station |
| 1.3.6.1.4.1.43.35.8.100.1.3 | ScalarapNotificationDot11RequestType | not-accessible | current | This attribute defines the request type sent by the station. Value = 1: Unknown request type Value = 2: Association Request Value = 3: Re-association Request V… |
| 1.3.6.1.4.1.43.35.8.100.1.4 | ScalarapNotificationDot11ReasonCode | not-accessible | current | This attribute defines the reason for the failure of an operation. Value = 1: Invalid mode/state Value = 2: Station not authenticated. Value = 3: Internal erro… |
| 1.3.6.1.4.1.43.35.8.100.1.5 | ScalarapNotificationDot11IpAddress | not-accessible | current | This value indicates the IP address of the Access Point |
| 1.3.6.1.4.1.43.35.8.100.1.6 | ScalarapNotificationDot11AuthenticatorMacAddr | not-accessible | current | This attribute holds the MAC address of the authenticator for the AP. |
| 1.3.6.1.4.1.43.35.8.100.2 | NodeapNotificationTrapObjects | |||
| 1.3.6.1.4.1.43.35.8.100.2.1 | NotificationsysSystemUp | current | The system up notification shall be sent when the AP is fully up and running. | |
| 1.3.6.1.4.1.43.35.8.100.2.2 | NotificationsysSystemDown | current | The system down notification shall be sent before the AP is about to reboot. | |
| 1.3.6.1.4.1.43.35.8.100.2.3 | NotificationsysRadiusServerChanged | current | The RADIUS server changed notification shall be sent when the RADIUS server has changed from Primary / Secondary to Secondary / Primary. | |
| 1.3.6.1.4.1.43.35.8.100.2.4 | Notificationdot11StationAssociation | current | The associate notification shall be sent when a station successfully associates with the Access Point. The value of the notification shall include the MAC addr… | |
| 1.3.6.1.4.1.43.35.8.100.2.5 | Notificationdot11StationReAssociation | current | The re-associate notification shall be sent when a station successfully re-associates with the Access Point. The value of the notification shall include the MA… | |
| 1.3.6.1.4.1.43.35.8.100.2.6 | Notificationdot11StationAuthentication | current | The authentication notification shall be sent when a station successfully authenticates with the Access Point. The value of the notification shall include the … | |
| 1.3.6.1.4.1.43.35.8.100.2.7 | Notificationdot11StationRequestFail | current | The station request fail shall be sent out when a station fails to associate / re-associate / authenticate with the Access Point. The notification shall includ… | |
| 1.3.6.1.4.1.43.35.8.100.2.8 | Notificationdot11InterfaceAGFail | current | The InterfaceAGFail notification shall be sent out when 802.11a/802.11g wireless interface has failed. | |
| 1.3.6.1.4.1.43.35.8.100.2.9 | Notificationdot1xMacAddrAuthSuccess | current | The 802.1x MAC address authentication success notification shall be sent when a station successfully authenticates the MAC address with the RADIUS server. The … | |
| 1.3.6.1.4.1.43.35.8.100.2.10 | Notificationdot1xMacAddrAuthFail | current | The 802.1x MAC address authentication failure notification shall be sent when a station fails to authenticate the MAC address with the RADIUS server. The value… | |
| 1.3.6.1.4.1.43.35.8.100.2.11 | Notificationdot1xAuthNotInitiated | current | The 802.1x authentication not initiated notification shall be sent when a station did not initiate 802.1x authentication with the RADIUS server. The value of t… | |
| 1.3.6.1.4.1.43.35.8.100.2.12 | Notificationdot1xAuthSuccess | current | The 802.1x authentication success notification shall be sent when a station successfully authenticates with the RADIUS server. The value of the notification sh… | |
| 1.3.6.1.4.1.43.35.8.100.2.13 | Notificationdot1xAuthFail | current | The 802.1x authentication failure notification shall be sent when a station fails to authenticate with the RADIUS server. The value of the notification shall i… | |
| 1.3.6.1.4.1.43.35.8.100.2.14 | NotificationlocalMacAddrAuthSuccess | current | The Local MAC address authentication success notification shall be sent when a station successfully authenticates the MAC address with the database stored loca… | |
| 1.3.6.1.4.1.43.35.8.100.2.15 | NotificationlocalMacAddrAuthFail | current | The Local MAC address authentication failure notification shall be sent when a station fails to authenticate the MAC address with the database stored locally w… | |
| 1.3.6.1.4.1.43.35.8.100.2.16 | NotificationpppLogonFail | current | The PPP Logon failure notification shall be sent out when the AP fails to login successfully to the PPP peer using the supplied username and password. | |
| 1.3.6.1.4.1.43.35.8.100.2.17 | NotificationiappStationRoamedFrom | current | The IAPP Station Roamed-From Notification shall be sent out whenever a station roams from another Access Point (AP) to this AP. The notification shall include … | |
| 1.3.6.1.4.1.43.35.8.100.2.18 | NotificationiappStationRoamedTo | current | The IAPP Station Roamed-To Notification shall be sent out whenever a station roams to another Access Point (AP) from this AP. The notification shall include th… | |
| 1.3.6.1.4.1.43.35.8.100.2.19 | NotificationiappContextDataSent | current | The IAPP Context Data Sent notification shall be sent out whenever the context data for a station has been sent to the new AP with which the station has associ… | |
| 1.3.6.1.4.1.43.35.8.100.2.20 | NotificationsntpServerFail | current | The sntpServerFail notification shall be sent when the AP fails to get time from the configured SNTP server. |