A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB
95 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43 | Nodea3Com | |||
| 1.3.6.1.4.1.43.29 | NodeswitchingSystemsMibs | |||
| 1.3.6.1.4.1.43.29.4 | Nodea3ComSwitchingSystemsMib | |||
| 1.3.6.1.4.1.43.29.4.6 | Nodea3ComSysBridgeAddressThresholdEvent | The trap that is generated when the number of addresses stored in the bridge reaches a3ComSysBridgeAddressThreshold. | ||
| 1.3.6.1.4.1.43.29.4.10 | Nodea3ComSysBridge | |||
| 1.3.6.1.4.1.43.29.4.10.1 | Scalara3ComSysBridgeCount | read-only | mandatory | The count of bridges managed by this agent. |
| 1.3.6.1.4.1.43.29.4.10.2 | Tablea3ComSysBridgeTable | not-accessible | mandatory | A list of bridge entries. A single entry exists in this list for each bridge managed by this agent. |
| 1.3.6.1.4.1.43.29.4.10.2.1 | Rowa3ComSysBridgeEntry | not-accessible | mandatory | A bridge entry contains information about a particular bridge managed by this agent. |
| 1.3.6.1.4.1.43.29.4.10.2.1.1 | Columna3ComSysBridgeIndex | read-only | mandatory | The index of the bridge identified by this entry, relative to this agent. |
| 1.3.6.1.4.1.43.29.4.10.2.1.2 | Columna3ComSysBridgePortCount | read-only | mandatory | The number of bridge ports that the bridge identified by this entry controls. |
| 1.3.6.1.4.1.43.29.4.10.2.1.3 | Columna3ComSysBridgeAddressTableSize | read-only | mandatory | The size of the address table for the bridge identified by this entry. |
| 1.3.6.1.4.1.43.29.4.10.2.1.4 | Columna3ComSysBridgeAddressTableCount | read-only | mandatory | The current count of addresses in the address table for the bridge identified by this entry. |
| 1.3.6.1.4.1.43.29.4.10.2.1.5 | Columna3ComSysBridgeAddressTablePeakCount | read-only | mandatory | The peak count of addresses in the address table for the bridge identified by this entry, since the system was last initialized. |
| 1.3.6.1.4.1.43.29.4.10.2.1.6 | Columna3ComSysBridgeAddressThreshold | read-write | mandatory | A reporting threshold for the total number of addresses known for the bridge identified by this entry. When this threshold is reached, the event a3ComSysBridge… |
| 1.3.6.1.4.1.43.29.4.10.2.1.7 | Columna3ComSysBridgeMode | read-write | mandatory | The operational mode of the bridge identified by this entry. Note that bridges which report notSupported(3) will not support sets of this object, and that the … |
| 1.3.6.1.4.1.43.29.4.10.2.1.8 | Columna3ComSysBridgeBackbonePort | read-write | mandatory | The number of the port selected as the backbone segment port when the corresponding value of a3ComSysBridgeMode is is expressMode(1). The value of this object … |
| 1.3.6.1.4.1.43.29.4.10.2.1.9 | Columna3ComSysBridgeIpFragmentationEnabled | read-write | mandatory | A flag indicating whether or not IP fragmentation is enabled on this bridge. Note that bridges which report notSupported(3) will not support sets of this objec… |
| 1.3.6.1.4.1.43.29.4.10.2.1.10 | Columna3ComSysBridgeTrFddiTranslationMode | read-write | mandatory | The mode used to describe whether the embedded MAC addresses are byte-conjugated in order to convert them from Token Ring format to native FDDI format (and vic… |
| 1.3.6.1.4.1.43.29.4.10.2.1.11 | Columna3ComSysBridgeSTPGroupAddress | read-write | mandatory | Spanning tree bridge group address. The address cannot be changed if the spanning tree is enabled (a3ComSysBridgeStpEnabled). |
| 1.3.6.1.4.1.43.29.4.10.2.1.12 | Columna3ComSysBridgeSTPEnable | read-write | mandatory | This object indicates if spanning tree bridge feature is enabled or disabled. If enabled this value will equal true(1). |
| 1.3.6.1.4.1.43.29.4.10.2.1.13 | Columna3ComSysBridgeIpxSnapTranslationEnable | read-write | mandatory | This object indicates if the IPX 802.3-FDDI SNAP Translation bridge feature is enabled or disabled. If enabled this value will equal true(1). Note, this object… |
| 1.3.6.1.4.1.43.29.4.10.2.1.14 | Columna3ComSysBridgeLowLatencyEnable | read-write | mandatory | This object indicates if the bridge low latency feature is enabled or disabled. If enabled this value will equal true(1). Note, this object may not be supporte… |
| 1.3.6.1.4.1.43.29.4.10.2.1.15 | Columna3ComSysBridgeVlanMode | read-write | mandatory | This object indicates the VLAN types that this bridge will support. Open mode means that each VLAN within this bridge will be of the Open type; all VLANs withi… |
| 1.3.6.1.4.1.43.29.4.10.2.1.16 | Columna3ComSysBridgeRateLimitReceiveMulticast | read-write | mandatory | This object limits the number of multicast frames forwarded by this port over a 1 second interval. The value is set across all ports on the device. |
| 1.3.6.1.4.1.43.29.4.10.2.1.17 | Columna3ComSysBridgeRateLimitReceiveBroadcast | read-write | mandatory | This object limits the number of broadcast frames forwarded by this port over a 1 second interval. The value is set across all ports on the device. |
| 1.3.6.1.4.1.43.29.4.10.2.1.18 | Columna3ComSysBridgeRateLimitReceiveFlood | read-write | mandatory | This object limits the number of frames forwarded that would normally be flooded by this port over a 1 second interval. The value is set across all ports on th… |
| 1.3.6.1.4.1.43.29.4.10.2.1.19 | Columna3ComSysBridgeAddressLearnMode | read-write | mandatory | This object determins the behavior of address management normal(1) - The device will learn dynamic addresses and static entries can be added. secure(2) - Stati… |
| 1.3.6.1.4.1.43.29.4.10.2.1.20 | Columna3ComSysBridgeAddressAgingInterval | read-write | mandatory | This object determines how long (in seconds) a dynamic entry is kept in the database. |
| 1.3.6.1.4.1.43.29.4.10.2.1.21 | Columna3ComSysBridgeLoopDetectMode | read-write | mandatory | This object determines the behavior of loop detection enabled(1) - The DA will detect loops and disable the apporiate port. disabled(2) - No loop detection mec… |
| 1.3.6.1.4.1.43.29.4.10.2.1.22 | Columna3ComSysBridgeLoopDetectSrcAddress | read-only | mandatory | This object returns the source address that is used to determine if a loop is present between client ports |
| 1.3.6.1.4.1.43.29.4.10.3 | Tablea3ComSysBridgePortTable | not-accessible | mandatory | A list of bridge port entries. A single entry exists in this list for each bridge port managed by this agent. |
| 1.3.6.1.4.1.43.29.4.10.3.1 | Rowa3ComSysBridgePortEntry | not-accessible | mandatory | A bridge port entry contains information about a particular bridge port managed by this agent. |
| 1.3.6.1.4.1.43.29.4.10.3.1.1 | Columna3ComSysBridgePortBridgeIndex | read-only | mandatory | The index of the bridge identified by this entry, relative to this agent. |
| 1.3.6.1.4.1.43.29.4.10.3.1.2 | Columna3ComSysBridgePortIndex | read-only | mandatory | The index of the bridge port identified by this entry, within the bridge identified by this entry. |
| 1.3.6.1.4.1.43.29.4.10.3.1.3 | Columna3ComSysBridgePortIfIndex | read-only | mandatory | The value of the MIB-II ifIndex corresponding to the bridge port identified by this entry. |
| 1.3.6.1.4.1.43.29.4.10.3.1.4 | Columna3ComSysBridgePortReceiveMulticastLimit | read-write | mandatory | This variable limits the number of multicast frames forwarded by this port over a 1 second interval. The minimum threshold limit may vary between platforms, bu… |
| 1.3.6.1.4.1.43.29.4.10.3.1.5 | Columna3ComSysBridgePortAddressAction | read-write | mandatory | This object, when read, always returns the value other(1). The behavior of setting this object to each of the acceptable values is as follows: freezeAddress: c… |
| 1.3.6.1.4.1.43.29.4.10.3.1.6 | Columna3ComSysBridgePortSpanningTreeFrameReceivedCounts | read-only | mandatory | The number of spanning tree frames received by the bridge port identified by this entry. |
| 1.3.6.1.4.1.43.29.4.10.3.1.7 | Columna3ComSysBridgePortReceiveBlockedDiscards | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry because the receiving bridge port was not in the 'forwarding' state. |
| 1.3.6.1.4.1.43.29.4.10.3.1.8 | Columna3ComSysBridgePortReceiveMulticastLimitExceededs | read-only | mandatory | The number of times the value of a3ComSysBridgePortReceiveMulticastLimit was exceeded for the port identified by this entry. |
| 1.3.6.1.4.1.43.29.4.10.3.1.9 | Columna3ComSysBridgePortReceiveMulticastLimitExceededDiscards | read-only | mandatory | The number of multicast/broadcast frames discarded by the bridge port identified by this entry because the corresponding value of a3ComSysBridgePortReceiveMult… |
| 1.3.6.1.4.1.43.29.4.10.3.1.10 | Columna3ComSysBridgePortReceiveSecurityDiscards | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry because they contained source addresses which were statically configured on another … |
| 1.3.6.1.4.1.43.29.4.10.3.1.11 | Columna3ComSysBridgePortReceiveUnknownDiscards | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry because the destination address was unknown. Note that this counter is only valid fo… |
| 1.3.6.1.4.1.43.29.4.10.3.1.12 | Columna3ComSysBridgePortReceiveOtherDiscards | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry because they contained either invalid (group) source addresses or source addresses b… |
| 1.3.6.1.4.1.43.29.4.10.3.1.13 | Columna3ComSysBridgePortReceiveErrorDiscards | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry because of internal bridge system errors (e.g., hardware and software address table … |
| 1.3.6.1.4.1.43.29.4.10.3.1.14 | Columna3ComSysBridgePortSameSegmentDiscards | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry because the destination address is known on the same network segment as the source a… |
| 1.3.6.1.4.1.43.29.4.10.3.1.15 | Columna3ComSysBridgePortTransmitBlockedDiscards | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry because the transmitting bridge port was not in the 'forwarding' state. |
| 1.3.6.1.4.1.43.29.4.10.3.1.16 | Columna3ComSysBridgePortReceiveAllPathFilteredFrames | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry due to user defined receive all path filters. |
| 1.3.6.1.4.1.43.29.4.10.3.1.17 | Columna3ComSysBridgePortReceiveMulticastPathFilteredFrames | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry due to user defined receive multicast path filters. |
| 1.3.6.1.4.1.43.29.4.10.3.1.18 | Columna3ComSysBridgePortTransmitAllPathFilteredFrames | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry due to user defined transmit all path filters. |
| 1.3.6.1.4.1.43.29.4.10.3.1.19 | Columna3ComSysBridgePortTransmitMulticastPathFilteredFrames | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry due to user defined transmit multicast path filters. |
| 1.3.6.1.4.1.43.29.4.10.3.1.20 | Columna3ComSysBridgePortForwardedUnicastFrames | read-only | mandatory | The number of unicast frames which this port forwarded to a single destination port. |
| 1.3.6.1.4.1.43.29.4.10.3.1.21 | Columna3ComSysBridgePortForwardedUnicastOctets | read-only | mandatory | The number of octets contained in unicast frames which this port forwarded to a single destination port. |
| 1.3.6.1.4.1.43.29.4.10.3.1.22 | Columna3ComSysBridgePortForwardedMulticastFrames | read-only | mandatory | The number of multicast frames which this port forwarded. |
| 1.3.6.1.4.1.43.29.4.10.3.1.23 | Columna3ComSysBridgePortForwardedMulticastOctets | read-only | mandatory | The number of octets contained in multicast frames which this port forwarded. |
| 1.3.6.1.4.1.43.29.4.10.3.1.24 | Columna3ComSysBridgePortFloodedUnicastFrames | read-only | mandatory | The number of unicast frames which this port flooded to all other ports in the bridge. |
| 1.3.6.1.4.1.43.29.4.10.3.1.25 | Columna3ComSysBridgePortFloodedUnicastOctets | read-only | mandatory | The number of octets contained in unicast frames which this port flooded to all other ports in the bridge. |
| 1.3.6.1.4.1.43.29.4.10.3.1.26 | Columna3ComSysBridgePortStpMode | read-write | mandatory | The mode of the bridge port. |
| 1.3.6.1.4.1.43.29.4.10.3.1.27 | Columna3ComSysBridgePortReceiveMulticastLimitFrameType | read-write | mandatory | This object identifies the frames type(s) that are to be counted when determining if the receive multicast limit has been exceeded for this bridge port. Device… |
| 1.3.6.1.4.1.43.29.4.10.3.1.28 | Columna3ComSysBridgePortForwardedFrames | read-only | mandatory | The number of frames which this port forwarded. |
| 1.3.6.1.4.1.43.29.4.10.3.1.29 | Columna3ComSysBridgePortReceiveMulticastLimitMultiplier | read-only | mandatory | This variable determines the minimum setting for the multicast limit threshold. For example if this value equals 1000, and the a3ComSysBridgePortReceiveMultica… |
| 1.3.6.1.4.1.43.29.4.10.3.1.30 | Columna3ComSysBridgePortRateLimitReceiveMulticastEnabled | read-write | mandatory | This object determines whether a port participates in multicast rate limiting set by the object a3ComSysBridgeRateLimitReceiveMulticast |
| 1.3.6.1.4.1.43.29.4.10.3.1.31 | Columna3ComSysBridgePortRateLimitReceiveBroadcastEnabled | read-write | mandatory | This object determines whether a port participates in broadcast rate limiting set by the object a3ComSysBridgeRateLimitReceiveBroadcast |
| 1.3.6.1.4.1.43.29.4.10.3.1.32 | Columna3ComSysBridgePortRateLimitReceiveFloodEnabled | read-write | mandatory | This object determines whether a port participates in flood rate limiting set by the object a3ComSysBridgeRateLimitReceiveFlood |
| 1.3.6.1.4.1.43.29.4.10.3.1.33 | Columna3ComSysBridgePortRateLimitReceiveState | read-only | mandatory | This object returns the bmfrl state of the port enabled(1) - port is up disabled(2) - port is down, but not as a result of BMFRL bmfrl-disabled(3) - port was d… |
| 1.3.6.1.4.1.43.29.4.10.3.1.34 | Columna3ComSysBridgePortLoopDetectState | read-only | mandatory | This object returns a reason code that will indicate why a given port was disable by the Loop Detection software. |
| 1.3.6.1.4.1.43.29.4.10.3.1.35 | Columna3ComSysBridgePortAddressMaxLimit | read-write | mandatory | This object controls the maximum number of unicast addresses that can be learned or configured on a port. This value is set on a per port basis. The value can'… |
| 1.3.6.1.4.1.43.29.4.10.3.1.36 | Columna3ComSysBridgePortAddressState | read-only | mandatory | This object returns a reason code that will indicate why a given port was disable, when a3ComDaAddressMode is set to secure. |
| 1.3.6.1.4.1.43.29.4.10.3.1.37 | Columna3ComSysBridgePortReceiveInternalPathFilteredFrames | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry due to receive internal path filters. |
| 1.3.6.1.4.1.43.29.4.10.5 | Tablea3ComSysBridgePortAddressTable | not-accessible | mandatory | A list of bridge port address information. A single entry exists in this list for each learned address, accross all bridge ports and all bridges managed by thi… |
| 1.3.6.1.4.1.43.29.4.10.5.1 | Rowa3ComSysBridgePortAddressEntry | not-accessible | mandatory | An bridge port address entry contains information about a particular bridge port address. To create a new entry, set an instance of a3ComSysBridgePortAddressRe… |
| 1.3.6.1.4.1.43.29.4.10.5.1.1 | Columna3ComSysBridgePortAddressBridgeIndex | read-only | mandatory | The index of the bridge identified by this entry, relative to this agent. |
| 1.3.6.1.4.1.43.29.4.10.5.1.2 | Columna3ComSysBridgePortAddressPortIndex | read-only | mandatory | The index of the bridge port identified by this entry, within the bridge identified by this entry. |
| 1.3.6.1.4.1.43.29.4.10.5.1.3 | Columna3ComSysBridgePortAddressIndex | read-only | mandatory | The index of this address entry within the bridge address table for the bridge identified by this entry. This index ranges from 1 to the corresponding value of… |
| 1.3.6.1.4.1.43.29.4.10.5.1.4 | Columna3ComSysBridgePortAddressRemoteAddress | read-write | mandatory | The remote MAC address detected on the bridge port identified by to this entry. Setting this object results in an attempt to create a new entry in the table. S… |
| 1.3.6.1.4.1.43.29.4.10.5.1.5 | Columna3ComSysBridgePortAddressType | read-write | mandatory | This object, when read, always returns the value valid(1). Setting this object to invalid(2) will remove the corresponding address entry from the table. |
| 1.3.6.1.4.1.43.29.4.10.5.1.6 | Columna3ComSysBridgePortAddressIsStatic | read-write | mandatory | A value indicating whether this MAC address was statically configured or was dynamically learned. Note that isStatic(1) is only valid for set operations. |
| 1.3.6.1.4.1.43.29.4.10.5.1.7 | Columna3ComSysBridgePortAddressStaticPort | read-only | mandatory | If the corresponding value of the object a3ComSysBridgePortAddressIsStatic is isStatic(1), this object indicates the local bridge port index (as reported by a3… |
| 1.3.6.1.4.1.43.29.4.10.5.1.8 | Columna3ComSysBridgePortAddressAge | read-only | mandatory | This object indicates the time, in seconds, elapsed since a packet containing this address as a source was last seen on the bridge port identified by this entr… |
| 1.3.6.1.4.1.43.29.4.10.6 | Scalara3ComSysBridgeStpGroupAddress | read-write | obsolete | Spanning tree bridge group address. The address cannot be changed if the spanning tree is enabled (a3ComSysBridgeStpEnabled). This object can now be found unde… |
| 1.3.6.1.4.1.43.29.4.10.7 | Scalara3ComSysBridgeStpEnable | read-write | obsolete | This object indicates if spanning tree bridge feature is enabled or disabled. If enabled this value will equal true(1). This object can now be found under the … |
| 1.3.6.1.4.1.43.29.4.10.8 | Tablea3ComSysBridgeVlanPortAddressTable | not-accessible | mandatory | A list of vlan bridge port address information. A single entry exists in this list for each learned address, across all vlan bridge ports and all vlan bridges … |
| 1.3.6.1.4.1.43.29.4.10.8.1 | Rowa3ComSysBridgeVlanPortAddressEntry | not-accessible | mandatory | A bridge vlan port address entry contains information about a particular bridge vlan port address. To create a new entry, set an instance of a3ComSysBridgeVlan… |
| 1.3.6.1.4.1.43.29.4.10.8.1.1 | Columna3ComSysBridgeVlanPortAddressBridgeIndex | read-only | mandatory | The index of the bridge vlan identified by this entry, relative to this agent. |
| 1.3.6.1.4.1.43.29.4.10.8.1.2 | Columna3ComSysBridgeVlanPortAddressVlanIndex | read-only | mandatory | The index of the vlan identified by this entry, within the bridge identified by this entry. |
| 1.3.6.1.4.1.43.29.4.10.8.1.3 | Columna3ComSysBridgeVlanPortAddressPortIndex | read-only | mandatory | The index of the bridge vlan port identified by this entry, within the bridge vlan identified by this entry. |
| 1.3.6.1.4.1.43.29.4.10.8.1.4 | Columna3ComSysBridgeVlanPortAddressIndex | read-only | mandatory | The index of this address entry within the bridge vlan address table for the bridge identified by this entry. This index ranges from 1 to the corresponding val… |
| 1.3.6.1.4.1.43.29.4.10.8.1.5 | Columna3ComSysBridgeVlanPortAddressRemoteAddress | read-write | mandatory | The remote MAC address detected on the bridge vlan port identified by to this entry. Setting this object results in an attempt to create a new entry in the tab… |
| 1.3.6.1.4.1.43.29.4.10.8.1.6 | Columna3ComSysBridgeVlanPortAddressType | read-write | mandatory | This object, when read, always returns the value valid(1). Setting this object to invalid(2) will remove the corresponding address entry from the table. |
| 1.3.6.1.4.1.43.29.4.10.8.1.7 | Columna3ComSysBridgeVlanPortAddressIsStatic | read-write | mandatory | A value indicating whether this MAC address was statically configured or was dynamically learned. Note that isStatic(1) is only valid for set operations. |
| 1.3.6.1.4.1.43.29.4.10.8.1.8 | Columna3ComSysBridgeVlanPortAddressStaticPort | read-only | mandatory | If the corresponding value of the object a3ComSysBridgeVlanPortAddressIsStatic is isStatic(1), this object indicates the local bridge port index (as reported b… |
| 1.3.6.1.4.1.43.29.4.10.8.1.9 | Columna3ComSysBridgeVlanPortAddressAge | read-only | mandatory | This object indicates the time, in seconds, elapsed since a packet containing this address as a source was last seen on the bridge vlan port identified by this… |
| 1.3.6.1.4.1.43.29.4.10.60 | Nodea3ComSysBridgePortLearnEvent | The Trap is generated to inform the network manager of the misbehaved port. The misbehavior is reported in the Address State. | ||
| 1.3.6.1.4.1.43.29.4.10.61 | Nodea3ComSysBridgePortRateLimitEvent | The Trap is generated to inform the network manager of a misbehaved port. The port has exceeded one of the port based rate limiting thresholds and has been pla… | ||
| 1.3.6.1.4.1.43.29.4.10.62 | Nodea3ComSysBridgePortLoopDetectEvent | The Trap is generated to inform the network manager of the misbehaved port. A loop has been detected on this port and the port has been placed into the reporte… |