A3COM-SWITCHING-SYSTEMS-FDDI-MIB
68 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43 | Nodea3Com | |||
| 1.3.6.1.4.1.43.29 | NodeswitchingSystemsMibs | |||
| 1.3.6.1.4.1.43.29.10 | Nodea3ComSwitchingSystemsFddiMib | |||
| 1.3.6.1.4.1.43.29.10.1 | Nodea3ComFddiSMT | |||
| 1.3.6.1.4.1.43.29.10.1 | Nodea3ComFddiSMTHoldCondition | Generated when fddiSMTHoldState (fddimibSMTHoldState) assumes the state holding-prm or holding-sec. This notification is a Condition in the Status Report Proto… | ||
| 1.3.6.1.4.1.43.29.10.1.1 | Tablea3ComFddiSMTTable | not-accessible | mandatory | A list of optional SMT entries. The number of entries shall not exceed the value of snmpFddiSMTNumber. |
| 1.3.6.1.4.1.43.29.10.1.1.1 | Rowa3ComFddiSMTEntry | not-accessible | mandatory | An optional SMT entry containing information common to a given optional SMT. |
| 1.3.6.1.4.1.43.29.10.1.1.1.1 | Columna3ComFddiSMTIndex | read-only | mandatory | A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-in… |
| 1.3.6.1.4.1.43.29.10.1.1.1.2 | Columna3ComFddiSMTManufacturerOUI | read-only | mandatory | The three octets of manufacturer data which make up the manufacturerOUI component. |
| 1.3.6.1.4.1.43.29.10.1.1.1.3 | Columna3ComFddiSMTManufacturerData | read-only | mandatory | The 29 octets of manufacturer data which make up the manufacturerData component. |
| 1.3.6.1.4.1.43.29.10.1.1.1.4 | Columna3ComFddiSMTHoldState | read-only | mandatory | This variable indicates the current state of the Hold function. The value 'not-holding' is the default and initial value. The value must be set to 'not-holding… |
| 1.3.6.1.4.1.43.29.10.1.1.1.5 | Columna3ComFddiSMTSetCount | read-only | mandatory | This variable is composed of a count incremented in response to a Set operation on the MIB, and the time of the change, however only the count is reported here… |
| 1.3.6.1.4.1.43.29.10.1.1.1.6 | Columna3ComFddiSMTLastSetStationId | read-only | mandatory | The Station ID of the station that effected the last change in the FDDI MIB. |
| 1.3.6.1.4.1.43.29.10.2 | Nodea3ComFddiMAC | |||
| 1.3.6.1.4.1.43.29.10.2 | Nodea3ComFddiSMTPeerWrapCondition | This condition is active when fddiSMTPeerWrapFlag (fddimibSMTPeerWrapFlag) is set. This notification is a Condition in the Status Report Protocol (see 7.2.7 an… | ||
| 1.3.6.1.4.1.43.29.10.2.1 | Tablea3ComFddiMACBridgeFunctionTable | not-accessible | mandatory | A list of MAC bridge function entries. |
| 1.3.6.1.4.1.43.29.10.2.1.1 | Rowa3ComFddiMACBridgeFunctionEntry | not-accessible | mandatory | Bridge function information for a given MAC within a given SMT. |
| 1.3.6.1.4.1.43.29.10.2.1.1.1 | Columna3ComFddiMACBridgeFunctionSMTIndex | read-only | mandatory | A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-in… |
| 1.3.6.1.4.1.43.29.10.2.1.1.2 | Columna3ComFddiMACBridgeFunctionMACIndex | read-only | mandatory | Index variable for uniquely identifying the MAC object instances. |
| 1.3.6.1.4.1.43.29.10.2.1.1.3 | Columna3ComFddiMACBridgeFunctions | read-only | mandatory | Indicates the MAC's optional bridging functions. The Value -1 is used to indicate that bridging is not supported by this MAC. The value is a sum. This value in… |
| 1.3.6.1.4.1.43.29.10.2.2 | Tablea3ComFddiMACTPriTable | not-accessible | mandatory | A list of MAC T-Pri entries. |
| 1.3.6.1.4.1.43.29.10.2.2.1 | Rowa3ComFddiMACTPriEntry | not-accessible | mandatory | A collection of T-Pri information for a given MAC within a given SMT. |
| 1.3.6.1.4.1.43.29.10.2.2.1.1 | Columna3ComFddiMACTPriSMTIndex | read-only | mandatory | A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-in… |
| 1.3.6.1.4.1.43.29.10.2.2.1.2 | Columna3ComFddiMACTPriMACIndex | read-only | mandatory | Index variable for uniquely identifying the MAC object instances. |
| 1.3.6.1.4.1.43.29.10.2.2.1.3 | Columna3ComFddiMACTPri0 | read-only | mandatory | This attribute is an unsigned twos-complement T-pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. |
| 1.3.6.1.4.1.43.29.10.2.2.1.4 | Columna3ComFddiMACTPri1 | read-only | mandatory | This attribute is an unsigned twos-complement T-pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. |
| 1.3.6.1.4.1.43.29.10.2.2.1.5 | Columna3ComFddiMACTPri2 | read-only | mandatory | This attribute is an unsigned twos-complement T-pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. |
| 1.3.6.1.4.1.43.29.10.2.2.1.6 | Columna3ComFddiMACTPri3 | read-only | mandatory | This attribute is an unsigned twos-complement T-pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. |
| 1.3.6.1.4.1.43.29.10.2.2.1.7 | Columna3ComFddiMACTPri4 | read-only | mandatory | This attribute is an unsigned twos-complement T-pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. |
| 1.3.6.1.4.1.43.29.10.2.2.1.8 | Columna3ComFddiMACTPri5 | read-only | mandatory | This attribute is an unsigned twos-complement T-pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. |
| 1.3.6.1.4.1.43.29.10.2.2.1.9 | Columna3ComFddiMACTPri6 | read-only | mandatory | This attribute is an unsigned twos-complement T-pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units. |
| 1.3.6.1.4.1.43.29.10.3 | Nodea3ComFddiMACDuplicateAddressCondition | This condition is active when either fddiMACDA-Flag (fddimibMACDaFlag) or fddiMACUNDA-Flag (fddimibMACUnaDaFlag) is set. This event is handled as a Condition i… | ||
| 1.3.6.1.4.1.43.29.10.3 | Nodea3ComFddiPATH | |||
| 1.3.6.1.4.1.43.29.10.3.1 | Tablea3ComFddiPATHRingTable | not-accessible | mandatory | A list of PATH ring entries. |
| 1.3.6.1.4.1.43.29.10.3.1.1 | Rowa3ComFddiPATHRingEntry | not-accessible | mandatory | Ring latency, trace status, and T-Rmode information for a given PATH within a given SMT. |
| 1.3.6.1.4.1.43.29.10.3.1.1.1 | Columna3ComFddiPATHRingSMTIndex | read-only | mandatory | A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-in… |
| 1.3.6.1.4.1.43.29.10.3.1.1.2 | Columna3ComFddiPATHRingPATHIndex | read-only | mandatory | Index variable for uniquely identifying the primary, secondary and local PATH object instances. Local PATH object instances are represented with integer values… |
| 1.3.6.1.4.1.43.29.10.3.1.1.3 | Columna3ComFddiPATHRingLatency | read-write | mandatory | Gives the total accumulated latency of the ring associated with this path. May be measured directly by the station or calculated by a management station. Value… |
| 1.3.6.1.4.1.43.29.10.3.1.1.4 | Columna3ComFddiPATHTraceStatus | read-only | mandatory | This attribute indicates the current trace status of the path. The value is a sum which represents all of the trace status information which applies. This valu… |
| 1.3.6.1.4.1.43.29.10.3.1.1.5 | Columna3ComFddiPATHT-Rmode | read-write | mandatory | Used by RMT to limit the duration of restricted dialogs on a path. This object is reported in 1 ns units. |
| 1.3.6.1.4.1.43.29.10.3.2 | Tablea3ComFddiPATHSbaTable | not-accessible | mandatory | A list of PATH Sba entries. |
| 1.3.6.1.4.1.43.29.10.3.2.1 | Rowa3ComFddiPATHSbaEntry | not-accessible | mandatory | Sba information for a given PATH within a given SMT. |
| 1.3.6.1.4.1.43.29.10.3.2.1.1 | Columna3ComFddiPATHSbaSMTIndex | read-only | mandatory | A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-in… |
| 1.3.6.1.4.1.43.29.10.3.2.1.2 | Columna3ComFddiPATHSbaPATHIndex | read-only | mandatory | Index variable for uniquely identifying the primary, secondary and local PATH object instances. Local PATH object instances are represented with integer values… |
| 1.3.6.1.4.1.43.29.10.3.2.1.3 | Columna3ComFddiPATHSbaPayload | read-write | mandatory | The payload portion of the Synchronous Bandwidth Allocation for thi path. This value represents the maximum number of bytes of data allocated for transmission … |
| 1.3.6.1.4.1.43.29.10.3.2.1.4 | Columna3ComFddiPATHSbaOverhead | read-write | mandatory | The overhead portion of the Synchronous Bandwith Allocation for this path. This value repersents the maximum number of bytes overhead (token capture, frame hea… |
| 1.3.6.1.4.1.43.29.10.3.2.1.5 | Columna3ComFddiPATHSbaAvailable | read-write | mandatory | This value is the maximum Synchronous Bandwith available for a path in bytes per second. |
| 1.3.6.1.4.1.43.29.10.4 | Nodea3ComFddiMACFrameErrorCondition | Generated when the fddiMACFrameErrorRatio (fddimibMACFrameErrorRatio) is greater than or equal to fddiMACFrameErrorThreshold (fddimibMACFrameErrorThreshold). T… | ||
| 1.3.6.1.4.1.43.29.10.4 | Nodea3ComFddiPORT | |||
| 1.3.6.1.4.1.43.29.10.4.1 | Tablea3ComFddiPORTTable | not-accessible | mandatory | A list of optional PORT entries. |
| 1.3.6.1.4.1.43.29.10.4.1.1 | Rowa3ComFddiPORTEntry | not-accessible | mandatory | MAC loop time and EB error count information for a given PORT within a given SMT. |
| 1.3.6.1.4.1.43.29.10.4.1.1.1 | Columna3ComFddiPORTSMTIndex | read-only | mandatory | A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-in… |
| 1.3.6.1.4.1.43.29.10.4.1.1.2 | Columna3ComFddiPORTIndex | read-only | mandatory | Index variable for uniquely identifying the PORT object instances. |
| 1.3.6.1.4.1.43.29.10.4.1.1.3 | Columna3ComFddiPORTMACLoopTime | read-write | mandatory | This attribute controls the value used for T-Next(9) (see 9.4.4.2.3). This object is reported in 1 ns units. |
| 1.3.6.1.4.1.43.29.10.4.1.1.4 | Columna3ComFddiPORTEBErrorCt | read-only | mandatory | A count that should as closely as possible match the times an Elasticity Buffer Error has occurred while in active line state. |
| 1.3.6.1.4.1.43.29.10.4.2 | Tablea3ComFddiPORTLSTable | not-accessible | mandatory | A list of optional PORT line state entries. |
| 1.3.6.1.4.1.43.29.10.4.2.1 | Rowa3ComFddiPORTLSEntry | not-accessible | mandatory | Maintenance line state and PC line state information for a given PORT within a given SMT. |
| 1.3.6.1.4.1.43.29.10.4.2.1.1 | Columna3ComFddiPORTLSSMTIndex | read-only | mandatory | A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-in… |
| 1.3.6.1.4.1.43.29.10.4.2.1.2 | Columna3ComFddiPORTLSPORTIndex | read-only | mandatory | Index variable for uniquely identifying the PORT object instances. |
| 1.3.6.1.4.1.43.29.10.4.2.1.3 | Columna3ComFddiPORTMaintLS | read-write | mandatory | The PORT Maintenance Line State specifies the line state (Maint-LS) to be transmitted when the PCM state machine for the port is in state PC9 Maint. |
| 1.3.6.1.4.1.43.29.10.4.2.1.4 | Columna3ComFddiPORTPCLS | read-only | mandatory | This attribute indicates the line state (PC-LS) received by the port. |
| 1.3.6.1.4.1.43.29.10.5 | Nodea3ComFddiMACNotCopiedCondition | Generated when the fddiMACNotCopiedRatio (fddimibMACNotCopiedRatio) is greater than or equal to the fddiMACNotCopiedThreshold (a3ComFddiMACNotCopiedThreshold).… | ||
| 1.3.6.1.4.1.43.29.10.6 | Nodea3ComFddiMACNeighborChangeEvent | Generated when a change in a MAC's upstream neighbor address or downstream neighbor address is detected. (see 7.2.7 and 8.3). | ||
| 1.3.6.1.4.1.43.29.10.7 | Nodea3ComFddiMACPathChangeEvent | This event is generated when the value of the fddiMACCurrentPath (fddimibMACCurrentPath) changes. This event shall be supressed if the value changes from isola… | ||
| 1.3.6.1.4.1.43.29.10.8 | Nodea3ComFddiPORTLerCondition | This condition becomes active when the value of fddiPORTLer-Estimate (fddimibPORTLerEstimate) is less than or equal to fddiPORTLer-Alarm (fddimibPORTLerAlarm).… | ||
| 1.3.6.1.4.1.43.29.10.9 | Nodea3ComFddiPORTUndesiredConnAttemptEvent | Generated when an undesired connection attempt has been made (see 5.2.4, 7.2.7, and 8.3). | ||
| 1.3.6.1.4.1.43.29.10.10 | Nodea3ComFddiPORTEBErrorCondition | Generated when the Elasticity Buffer Error-Ct (a3ComFddiPORTEBErrorCt) increments. This is handled as a condition in the Status Report Protocol. It is generate… | ||
| 1.3.6.1.4.1.43.29.10.11 | Nodea3ComFddiPORTPathChangeEvent | This event is generated when the value of the fddiPORTCurrentPath (a3ComFddiPORTCurrentPath) changes. This event shall be surpressed if the value changes from … |