A3COM-SWITCHING-SYSTEMS-FILTER-MIB
53 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | enterprises |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43 | Nodea3Com | |||
| 1.3.6.1.4.1.43.29 | NodeswitchingSystemsMibs | |||
| 1.3.6.1.4.1.43.29.4 | Nodea3ComSwitchingSystemsMib | |||
| 1.3.6.1.4.1.43.29.4.20 | Nodea3ComFilterGroup | |||
| 1.3.6.1.4.1.43.29.4.20.1 | Nodea3ComFilterAddressGroup | |||
| 1.3.6.1.4.1.43.29.4.20.1.1 | Scalara3ComFilterAddressGroupNextAvailableIndex | read-only | mandatory | The value of next available a3ComFilterAddressGroupId. This object is used for index value to create a new address group. |
| 1.3.6.1.4.1.43.29.4.20.1.2 | Scalara3ComFilterAddressGroupCount | read-only | mandatory | The count of defined address groups. |
| 1.3.6.1.4.1.43.29.4.20.1.3 | Tablea3ComFilterAddressGroupTable | not-accessible | mandatory | A list of address group entries. A single entry exists in this list for each defined address group in the system. |
| 1.3.6.1.4.1.43.29.4.20.1.3.1 | Rowa3ComFilterAddressGroupEntry | not-accessible | mandatory | An individual address group entry. |
| 1.3.6.1.4.1.43.29.4.20.1.3.1.1 | Columna3ComFilterAddressGroupId | read-only | mandatory | This object uniquely identifies an address group in the systems. Its value, successively increases starting from 0, will change only if the system is rebooted.… |
| 1.3.6.1.4.1.43.29.4.20.1.3.1.2 | Columna3ComFilterAddressGroupMaskId | read-write | mandatory | This object identifies an address group in a bridge. Each address group has an unique mask identifier, range from 1 to 32, associated with it in a bridge. This… |
| 1.3.6.1.4.1.43.29.4.20.1.3.1.3 | Columna3ComFilterAddressGroupBridgeMask | read-write | mandatory | A mask that uniquely identifies the bridge value(s) associated with this address group entry. For example, 0x0000 0000 0000 0003 represents the address group e… |
| 1.3.6.1.4.1.43.29.4.20.1.3.1.4 | Columna3ComFilterAddressGroupName | read-write | mandatory | The name of an address group. Each address group has an unique name in a system. |
| 1.3.6.1.4.1.43.29.4.20.1.3.1.5 | Columna3ComFilterAddressGroupStatus | read-write | mandatory | The status column for this address group entry. This OBJECT can be set to: createAndGo(4) destroy(6) The following values may be read: active(1) Setting this o… |
| 1.3.6.1.4.1.43.29.4.20.1.4 | Tablea3ComFilterAddressTable | not-accessible | mandatory | A list of address entries. |
| 1.3.6.1.4.1.43.29.4.20.1.4.1 | Rowa3ComFilterAddressEntry | not-accessible | mandatory | A set of parameters for a particular address entry. |
| 1.3.6.1.4.1.43.29.4.20.1.4.1.1 | Columna3ComFilterAddressId | read-only | mandatory | This object uniquely identifies an address group as defined in a3ComFilterAddressGroupTable. It is obtained from a3ComFilterAddressGroupNextAvailableIndex. |
| 1.3.6.1.4.1.43.29.4.20.1.4.1.2 | Columna3ComFilterAddressAddress | read-only | mandatory | The physical address of this entry. |
| 1.3.6.1.4.1.43.29.4.20.1.4.1.3 | Columna3ComFilterAddressStatus | read-write | mandatory | The status column for this address group entry. This OBJECT can be set to: createAndGo(4) destroy(6) The following values may be read: active(1) Setting this o… |
| 1.3.6.1.4.1.43.29.4.20.2 | Nodea3ComFilterPortGroup | |||
| 1.3.6.1.4.1.43.29.4.20.2.1 | Scalara3ComFilterPortGroupNextAvailableIndex | read-only | mandatory | The value of next available a3ComFilterPortGroupId. This object is used for index value to create a new port group. |
| 1.3.6.1.4.1.43.29.4.20.2.2 | Scalara3ComFilterPortGroupCount | read-only | mandatory | The count of defined port groups in the system. |
| 1.3.6.1.4.1.43.29.4.20.2.3 | Tablea3ComFilterPortGroupTable | not-accessible | mandatory | A list of port group entries. A single entry exists in this list for each defined port group in the system. |
| 1.3.6.1.4.1.43.29.4.20.2.3.1 | Rowa3ComFilterPortGroupEntry | not-accessible | mandatory | A set of parameters for an individual port group entry. |
| 1.3.6.1.4.1.43.29.4.20.2.3.1.1 | Columna3ComFilterPortGroupId | read-only | mandatory | This object uniquely identifies a port group in the systems. Its value, successively increases starting from 0, will change only if the system is rebooted. Thi… |
| 1.3.6.1.4.1.43.29.4.20.2.3.1.2 | Columna3ComFilterPortGroupMaskId | read-write | mandatory | This object identifies a port group in a bridge. Each port group has an unique mask identifier, range from 1 to 32, associated with it in a bridge. This field … |
| 1.3.6.1.4.1.43.29.4.20.2.3.1.3 | Columna3ComFilterPortGroupBridgeNumber | read-write | mandatory | The bridge index associated with this port group. |
| 1.3.6.1.4.1.43.29.4.20.2.3.1.4 | Columna3ComFilterPortGroupName | read-write | mandatory | The name of this port group. This object has be unique in a system. |
| 1.3.6.1.4.1.43.29.4.20.2.3.1.5 | Columna3ComFilterPortGroupStatus | read-write | mandatory | The status column for this port group entry. This OBJECT can be set to: createAndGo(4) destroy(6) The following values may be read: active(1) Setting this obje… |
| 1.3.6.1.4.1.43.29.4.20.2.4 | Tablea3ComFilterPortTable | not-accessible | mandatory | A list of port entries. |
| 1.3.6.1.4.1.43.29.4.20.2.4.1 | Rowa3ComFilterPortEntry | not-accessible | mandatory | An individual port entry. |
| 1.3.6.1.4.1.43.29.4.20.2.4.1.1 | Columna3ComFilterPortId | read-only | mandatory | This object uniquely identify an address group in the systems. It successively increases starting from 1. This value is obtained through a3ComFilterPortGroupNe… |
| 1.3.6.1.4.1.43.29.4.20.2.4.1.2 | Columna3ComFilterPortType | read-only | mandatory | This indicates interface port type(s) that are currently supported by LanPlex modules. |
| 1.3.6.1.4.1.43.29.4.20.2.4.1.3 | Columna3ComFilterPortPort | read-only | mandatory | The port on the bridge identified by port type. |
| 1.3.6.1.4.1.43.29.4.20.2.4.1.4 | Columna3ComFilterPortStatus | read-write | mandatory | The status column for this port group entry. This OBJECT can be set to: createAndGo(4) destroy(6) The following values may be read: active(1) Setting this obje… |
| 1.3.6.1.4.1.43.29.4.20.3 | Nodea3ComBridgeFilterGroup | |||
| 1.3.6.1.4.1.43.29.4.20.3.1 | Scalara3ComBridgeFilterNextAvailableIndex | read-only | mandatory | The value of next available a3ComBridgeFilterId. This object indicates filter id when a new bridge filter is created through console or ftp download. |
| 1.3.6.1.4.1.43.29.4.20.3.2 | Scalara3ComBridgeFilterCount | read-only | mandatory | The count of stored bridge packet filter programs on the bridge. |
| 1.3.6.1.4.1.43.29.4.20.3.3 | Tablea3ComBridgeFilterTable | not-accessible | mandatory | The list of stored bridge packet filter programs on bridge(s), bridge port(s) and port processing path. |
| 1.3.6.1.4.1.43.29.4.20.3.3.1 | Rowa3ComBridgeFilterEntry | not-accessible | mandatory | The set of parameters for an individual bridge packet filter program. |
| 1.3.6.1.4.1.43.29.4.20.3.3.1.1 | Columna3ComBridgeFilterId | read-only | mandatory | An index that uniquely identifies a bridge filter in a system. Its value will change only if the system is rebooted. |
| 1.3.6.1.4.1.43.29.4.20.3.3.1.2 | Columna3ComBridgeFilterBridgeNumber | read-only | mandatory | The bridge index associated with this bridge filter program. |
| 1.3.6.1.4.1.43.29.4.20.3.3.1.3 | Columna3ComBridgeFilterName | read-only | mandatory | The filter name associated with this entry. |
| 1.3.6.1.4.1.43.29.4.20.3.3.1.4 | Columna3ComBridgeFilterProgram | read-only | mandatory | The bridge filter program. |
| 1.3.6.1.4.1.43.29.4.20.3.3.1.5 | Columna3ComBridgeFilterStatus | read-write | mandatory | The status column for this filter definition entry. This OBJECT can be set to: createAndGo(4) destroy(6) The following values may be read: active(1) Creation o… |
| 1.3.6.1.4.1.43.29.4.20.3.4 | Tablea3ComPortFilterTable | not-accessible | mandatory | The list of stored bridge packet filter programs on bridge(s), bridge port(s) and port processing path. |
| 1.3.6.1.4.1.43.29.4.20.3.4.1 | Rowa3ComPortFilterEntry | not-accessible | mandatory | The set of parameters for an individual bridge packet filter program. |
| 1.3.6.1.4.1.43.29.4.20.3.4.1.1 | Columna3ComPortFilterId | read-only | mandatory | An index that uniquely identifies a bridge filter on the bridge. |
| 1.3.6.1.4.1.43.29.4.20.3.4.1.2 | Columna3ComPortFilterBridgeNumber | read-only | mandatory | The bridge index associated with this bridge filter program. |
| 1.3.6.1.4.1.43.29.4.20.3.4.1.3 | Columna3ComPortFilterBridgePortType | read-only | mandatory | This indicates interface port type(s) that are currently supported by LanPlex modules. |
| 1.3.6.1.4.1.43.29.4.20.3.4.1.4 | Columna3ComPortFilterBridgePortPort | read-only | mandatory | The port on the bridge identified by this row's a3ComPortFilterBridgeNumber. |
| 1.3.6.1.4.1.43.29.4.20.3.4.1.5 | Columna3ComPortFilterPktProcessPath | read-write | mandatory | The packet processing path to apply the filter. The value is a bit mask defined as follows: Mask Value Path Description 0x1 Xmit All All frames xmitted to segm… |
| 1.3.6.1.4.1.43.29.4.20.3.4.1.6 | Columna3ComPortFilterStatus | read-write | mandatory | The status column for this filter definition entry. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be… |