A3COM-SWITCHING-SYSTEMS-MIB
424 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43 | Nodea3Com | |||
| 1.3.6.1.4.1.43.29 | NodeswitchingSystems-mib | |||
| 1.3.6.1.4.1.43.29.4 | NodeswitchingSystemsMibGroups | |||
| 1.3.6.1.4.1.43.29.4.1 | Nodea3ComSysSystem | |||
| 1.3.6.1.4.1.43.29.4.1 | Nodea3ComSysSystemOverTemperatureEvent | The trap that is generated when the system temperature exceeds a certain threshold. | ||
| 1.3.6.1.4.1.43.29.4.1.1 | Scalara3ComSysSystemId | read-only | mandatory | The unique identifier assigned to this system during manufacturing. |
| 1.3.6.1.4.1.43.29.4.1.2 | Scalara3ComSysSystemType | read-only | mandatory | The type of system. |
| 1.3.6.1.4.1.43.29.4.1.3 | Scalara3ComSysSystemName | read-write | mandatory | The text string describing this system. |
| 1.3.6.1.4.1.43.29.4.1.4 | Scalara3ComSysSystemManufacturer | read-only | mandatory | The text string describing the manufacturer of this system. |
| 1.3.6.1.4.1.43.29.4.1.5 | Scalara3ComSysSystemHardwareRevision | read-only | mandatory | The revision level of the system, contained in two octets. The first octet indicates the artwork revision, and the second octet indicates the rework level. |
| 1.3.6.1.4.1.43.29.4.1.6 | Scalara3ComSysSystemMemorySize | read-only | mandatory | The amount of memory (RAM), in bytes, present on the system processor board. |
| 1.3.6.1.4.1.43.29.4.1.7 | Scalara3ComSysSystemFlashMemorySize | read-only | mandatory | The amount of flash memory, in bytes, present on the system processor board. |
| 1.3.6.1.4.1.43.29.4.1.8 | Scalara3ComSysSystemNvMemorySize | read-only | mandatory | The amount of non-volatile memory, in bytes, present on the system processor board. |
| 1.3.6.1.4.1.43.29.4.1.9 | Scalara3ComSysSystemSoftwareRevision | read-only | mandatory | The revision number of the Switching Systems software. Each byte indicates the following: byte 0: major release number. byte 1: minor release number. byte 2: u… |
| 1.3.6.1.4.1.43.29.4.1.10 | Scalara3ComSysSystemBuildTime | read-only | mandatory | The build time of the system software. |
| 1.3.6.1.4.1.43.29.4.1.11 | Scalara3ComSysSystemSnmpRevision | read-only | mandatory | The revision number of the SNMP agent implementation. |
| 1.3.6.1.4.1.43.29.4.1.12 | Scalara3ComSysSystemRequestedSnmpMode | read-write | mandatory | This object describes the requested SNMP mode for the system. The value of this object indicates the mode that will become effective following a reboot of the … |
| 1.3.6.1.4.1.43.29.4.1.13 | Scalara3ComSysSystemCurrentSnmpMode | read-only | mandatory | This object describes the currently active SNMP mode for the system. Note that only a subset of the above values may be valid for some systems. |
| 1.3.6.1.4.1.43.29.4.1.14 | Scalara3ComSysSystemAction | read-write | mandatory | This object, when read, always returns the value other(1). Setting this object to the value reset(2) causes a reset of the system. Setting this object to the v… |
| 1.3.6.1.4.1.43.29.4.1.15 | Scalara3ComSysSystemOvertemperature | read-only | mandatory | This object indicates the current overtemperature status for the system. If the system does not support overtemperature detection, this object returns notSuppo… |
| 1.3.6.1.4.1.43.29.4.1.16 | Scalara3ComSysSystemFanFailure | read-only | mandatory | This object indicates the current fan status for the system. If the system does not support fan failure detection, this object returns notSupported. |
| 1.3.6.1.4.1.43.29.4.1.17 | Scalara3ComSysSystemProtocolMask | read-only | mandatory | This object is a bit mask that indicates which protocols exist in the software image currently loaded in memory. The value of this OBJECT is a sum. It initiall… |
| 1.3.6.1.4.1.43.29.4.1.18 | Scalara3ComSysSystemConsoleAccess | read-write | mandatory | This object determines whether another device can remotely access the system console via Telnet, Rlogin, or modem port. An existing remote session will not be … |
| 1.3.6.1.4.1.43.29.4.1.19 | Scalara3ComSysSystemConsoleReadPwd | read-write | mandatory | This object is the console read-access password. |
| 1.3.6.1.4.1.43.29.4.1.20 | Scalara3ComSysSystemConsoleWritePwd | read-write | mandatory | This object is the console write-access password. The read-write community string is required for access to this object. |
| 1.3.6.1.4.1.43.29.4.1.21 | Scalara3ComSysSystemConsoleAdminPwd | read-write | mandatory | This object is the console admin-access password. The read-write community string is required for access to this object. |
| 1.3.6.1.4.1.43.29.4.1.22 | Scalara3ComSysSystemDateTime | read-write | mandatory | The current date and time as reflected by the system clock in the format mm/dd/yy hh:mm:ss xM. |
| 1.3.6.1.4.1.43.29.4.1.23 | Scalara3ComSysSystemDSTime | read-write | mandatory | This parameter specifies the displacement, in minutes, from non-daylight savings time. The a3ComSysDSTime object, along with the a3ComSysTimeZone object, allow… |
| 1.3.6.1.4.1.43.29.4.1.24 | Scalara3ComSysSystemTimeZone | read-write | mandatory | This parameter specifies, in minutes, displacement of the system west of Greenwich. A negative number for this parameter indicates how many minutes displacemen… |
| 1.3.6.1.4.1.43.29.4.1.25 | Scalara3ComSysSystemCurrentFddiStationMode | read-only | mandatory | This object describes the current FDDI station mode for systems that support multi-station mode. |
| 1.3.6.1.4.1.43.29.4.1.26 | Scalara3ComSysSystemRequestedFddiStationMode | read-write | mandatory | This object describes the requested FDDI station mode for systems that support multi-station mode. The requested mode will become current during the next syste… |
| 1.3.6.1.4.1.43.29.4.1.27 | Nodea3ComSysSystemLog | |||
| 1.3.6.1.4.1.43.29.4.1.27.1 | Scalara3ComSysSystemLogEntryCurrentCount | read-only | mandatory | The number of entries currently recorded in the system log. |
| 1.3.6.1.4.1.43.29.4.1.27.2 | Scalara3ComSysSystemLogMaxSize | read-only | mandatory | The maximum number of events that can be recorded in the system log. |
| 1.3.6.1.4.1.43.29.4.1.27.3 | Scalara3ComSysSystemLogSeverityThreshold | read-write | mandatory | This object determines the miminum serverety level of events recorded in the system log. For example, if the a3ComSysSysteLogSeverityThreshold is set to errors… |
| 1.3.6.1.4.1.43.29.4.1.27.4 | Tablea3ComSysSystemLogTable | not-accessible | mandatory | This table provides information on recorded system events. |
| 1.3.6.1.4.1.43.29.4.1.27.4.1 | Rowa3ComSysSystemLogEntry | not-accessible | mandatory | A system log entry. |
| 1.3.6.1.4.1.43.29.4.1.27.4.1.1 | Columna3ComSysSystemLogIndex | read-only | mandatory | The index of the log entry relative to this entry. |
| 1.3.6.1.4.1.43.29.4.1.27.4.1.2 | Columna3ComSysSystemLogSeverityLevel | read-only | mandatory | Indicates the severity level of the log entry. |
| 1.3.6.1.4.1.43.29.4.1.27.4.1.3 | Columna3ComSysSystemLogDateTime | read-only | mandatory | Indicates the date and time of the log event and is formatted as follows: MM:DD:YY HH:MM:SS. |
| 1.3.6.1.4.1.43.29.4.1.27.4.1.4 | Columna3ComSysSystemLogFacility | read-only | mandatory | The facility which entered the event in the log. fcmlmm(6) represents those events which may be common to the Lanplex Management Module (LMM) and the FDDI Conc… |
| 1.3.6.1.4.1.43.29.4.1.27.4.1.5 | Columna3ComSysSystemLogMessage | read-only | mandatory | The recorded log message. |
| 1.3.6.1.4.1.43.29.4.1.28 | Scalara3ComSysSystemBaseMACAddress | read-only | mandatory | The base MAC address for the system. |
| 1.3.6.1.4.1.43.29.4.1.29 | Scalara3ComSysSystemMACAddressCount | read-only | mandatory | The number of MAC addresses allocated to this system. |
| 1.3.6.1.4.1.43.29.4.1.30 | Scalara3ComSysSystemChassisSerialNumber | read-only | mandatory | The serial number of the chassis. |
| 1.3.6.1.4.1.43.29.4.1.31 | Scalara3ComSysSystemFPMemorySize | read-only | mandatory | The amount of frame processor memory (RAM), in bytes. |
| 1.3.6.1.4.1.43.29.4.1.32 | Scalara3ComSysSystemBufferSize | read-only | mandatory | The amount of buffer memory, in bytes. |
| 1.3.6.1.4.1.43.29.4.2 | Nodea3ComSysPowerSupplyFailureEvent | The trap that is generated when a power supply unit fails. | ||
| 1.3.6.1.4.1.43.29.4.2 | Nodea3ComSysSlot | |||
| 1.3.6.1.4.1.43.29.4.2.1 | Scalara3ComSysSlotCount | read-only | mandatory | The count of slots in the chassis. |
| 1.3.6.1.4.1.43.29.4.2.2 | Tablea3ComSysSlotTable | not-accessible | mandatory | A list of slot entries. A single entry exists in this list for each slot in the chassis. |
| 1.3.6.1.4.1.43.29.4.2.2.1 | Rowa3ComSysSlotEntry | not-accessible | mandatory | A slot entry contains information about a particular slot. |
| 1.3.6.1.4.1.43.29.4.2.2.1.1 | Columna3ComSysSlotIndex | read-only | mandatory | The index of the slot identified by this entry. |
| 1.3.6.1.4.1.43.29.4.2.2.1.2 | Columna3ComSysSlotBoardType | read-only | mandatory | The type of board residing in the slot identified by this entry. |
| 1.3.6.1.4.1.43.29.4.2.2.1.3 | Columna3ComSysSlotBoardRevision | read-only | mandatory | The revision number of the board in the slot identified by this entry. If the slot is empty, or the revision is unknown this object returns a zero length strin… |
| 1.3.6.1.4.1.43.29.4.2.2.1.4 | Columna3ComSysSlotBoardStatus | read-only | mandatory | The status of the board in the slot identified by this entry. |
| 1.3.6.1.4.1.43.29.4.2.2.1.5 | Columna3ComSysSlotBoardName | read-only | mandatory | The text string describing the board in the slot identified by this entry. |
| 1.3.6.1.4.1.43.29.4.2.2.1.6 | Columna3ComSysSlotBoardNameAbbrev | read-only | mandatory | The abbreviation used to describe the board in the slot identified by this entry. |
| 1.3.6.1.4.1.43.29.4.2.2.1.7 | Columna3ComSysSlotEthernetPortCount | read-only | mandatory | The count of ethernet ports in the slot identified by this entry. |
| 1.3.6.1.4.1.43.29.4.2.2.1.8 | Columna3ComSysSlotFddiMacCount | read-only | mandatory | The count of FDDI MACs in the slot identified by this entry. |
| 1.3.6.1.4.1.43.29.4.2.2.1.9 | Columna3ComSysSlotFddiPortCount | read-only | mandatory | The count of FDDI ports in the slot identified by this entry. |
| 1.3.6.1.4.1.43.29.4.2.2.1.10 | Columna3ComSysSlotOvertemperature | read-only | mandatory | This object indicates the current overtemperature status for the slot. If the slot does not support overtemperature detection, this object returns notSupported. |
| 1.3.6.1.4.1.43.29.4.2.2.1.11 | Columna3ComSysSlotTokenRingPortCount | read-only | mandatory | The count of TokenRing ports in the slot identified by this entry. |
| 1.3.6.1.4.1.43.29.4.2.2.1.12 | Columna3ComSysSlotBoardRevStr | read-only | mandatory | This revision number of the board in the slot identified by this entry. If the slot is empty, or the revision is unknown this object returns a zero length stri… |
| 1.3.6.1.4.1.43.29.4.2.2.1.13 | Columna3ComSysSlotConverterBad | read-only | mandatory | This object indicates the current status +12V->+5V converter for the slot. If the slot does not support +12V->+5V converter detection, this object returns notS… |
| 1.3.6.1.4.1.43.29.4.3 | Nodea3ComSysChassisSlotOverTemperatureEvent | The trap that is generated when the temperature of a board in a particular slot exceeds a certain threshold. | ||
| 1.3.6.1.4.1.43.29.4.3 | Nodea3ComSysControlPanel | |||
| 1.3.6.1.4.1.43.29.4.3.1 | Scalara3ComSysControlPanelHardwareRevision | read-only | mandatory | An 8-bit value specifying the revision level of the control panel hardware. |
| 1.3.6.1.4.1.43.29.4.3.2 | Scalara3ComSysControlPanelSoftwareRevision | read-only | mandatory | An 8-bit value specifying the revision level of the control panel software. |
| 1.3.6.1.4.1.43.29.4.3.3 | Scalara3ComSysControlPanelLines | read-only | mandatory | The number of lines in the control panel display. |
| 1.3.6.1.4.1.43.29.4.3.4 | Scalara3ComSysControlPanelColumns | read-only | mandatory | The number of columns in the control panel display. |
| 1.3.6.1.4.1.43.29.4.3.5 | Scalara3ComSysControlPanelText | read-only | mandatory | The currently displayed text in the control panel display. |
| 1.3.6.1.4.1.43.29.4.3.6 | Scalara3ComSysControlPanelAccess | read-write | mandatory | This object determines whether modifications to system configuration are allowed via the Control Panel |
| 1.3.6.1.4.1.43.29.4.4 | Nodea3ComSysChassisSlotInsertEvent | The trap that is generated when a board is inserted into a particular slot. | ||
| 1.3.6.1.4.1.43.29.4.4 | Nodea3ComSysPowerSupply | |||
| 1.3.6.1.4.1.43.29.4.4.1 | Scalara3ComSysPowerSupplyCount | read-only | mandatory | The count of power supplies in the system. |
| 1.3.6.1.4.1.43.29.4.4.2 | Tablea3ComSysPowerSupplyStatusTable | not-accessible | mandatory | A list of power supply status entries. |
| 1.3.6.1.4.1.43.29.4.4.2.1 | Rowa3ComSysPowerSupplyStatusEntry | not-accessible | mandatory | A power supply status entry contains information about a particular power supply. |
| 1.3.6.1.4.1.43.29.4.4.2.1.1 | Columna3ComSysPowerSupplyStatusIndex | read-only | mandatory | The unique index of the power supply identified by this entry. |
| 1.3.6.1.4.1.43.29.4.4.2.1.2 | Columna3ComSysPowerSupplyStatus | read-only | mandatory | This object represents the power supply status. The value is a sum. It initially takes on the value 0, then for each type which is active, 2 raised to a power … |
| 1.3.6.1.4.1.43.29.4.4.2.1.3 | Columna3ComSysPowerSupplyStatusSupported | read-only | mandatory | This object represents the various power supply status types which are supported. The value is a sum. It initially takes on the value 0, then for each type whi… |
| 1.3.6.1.4.1.43.29.4.5 | Nodea3ComSysChassisSlotExtractEvent | The trap that is generated when a board is extracted from a particular slot. | ||
| 1.3.6.1.4.1.43.29.4.5 | Nodea3ComSysSnmp | |||
| 1.3.6.1.4.1.43.29.4.5.1 | Scalara3ComSysSnmpAgentId | read-only | mandatory | The unique id for this SNMP agent within the system. |
| 1.3.6.1.4.1.43.29.4.5.2 | Scalara3ComSysSnmpInternalAgentTrapMask | read-write | mandatory | This value is a bit string that indicates which traps are enabled for transmit to other agents in the system. The octet string value is treated as a 64-bit int… |
| 1.3.6.1.4.1.43.29.4.5.3 | Scalara3ComSysSnmpInternalAgentTrapDestinationMask | read-write | mandatory | A value which indicates to which other agents in the system traps should be sent. The value is a sum. It initially takes on the value 0, then for each agent wh… |
| 1.3.6.1.4.1.43.29.4.5.4 | Scalara3ComSysSnmpProxyInternalRequests | read-write | deprecated | This object determines if this agent will proxy requests to other agents in the system. If the value of this object is true(1), this agent will proxy requests … |
| 1.3.6.1.4.1.43.29.4.5.5 | Scalara3ComSysSnmpInternalProxyRequestMaxAge | read-write | mandatory | The maximum time, in seconds, an internal proxy request will remain queued waiting for a response before being discarded. Note that when the value of a3ComSysS… |
| 1.3.6.1.4.1.43.29.4.5.6 | Scalara3ComSysSnmpProxyInternalTraps | read-write | deprecated | This object determines if this agent will generate proxy traps for those traps received from other agents in the system. If the value of this object is true(1)… |
| 1.3.6.1.4.1.43.29.4.5.7 | Tablea3ComSysSnmpInternalProxyTable | not-accessible | mandatory | A list of SNMP internal agent proxy entries. An entry in this table exists for each agent in the system that can be reached by this agent via the internal prox… |
| 1.3.6.1.4.1.43.29.4.5.7.1 | Rowa3ComSysSnmpInternalProxyEntry | not-accessible | mandatory | An entry identifies the communities available for communicating with another agent in the system via the internal proxy mechanism. |
| 1.3.6.1.4.1.43.29.4.5.7.1.1 | Columna3ComSysSnmpInternalProxyAgentId | read-only | mandatory | The id of the agent identified by this entry. |
| 1.3.6.1.4.1.43.29.4.5.7.1.2 | Columna3ComSysSnmpInternalProxyAccessClass | read-only | mandatory | The access to MIB objects supported by the agent identified by this entry provided by this agent, when using the community string identified by the correspondi… |
| 1.3.6.1.4.1.43.29.4.5.7.1.3 | Columna3ComSysSnmpInternalProxyCommunity | read-only | mandatory | A community which allows access to MIB objects supported by the agent identified by this entry. |
| 1.3.6.1.4.1.43.29.4.6 | Nodea3ComSysAgent | |||
| 1.3.6.1.4.1.43.29.4.6 | Nodea3ComSysBridgeAddressThresholdEvent | The trap that is generated when the number of addresses stored in the bridge reaches a3ComSysBridgeAddressThreshold. | ||
| 1.3.6.1.4.1.43.29.4.6.1 | Scalara3ComSysAgentRequestMaxAge | read-write | mandatory | The maximum time, in seconds, a local SNMP request will remain queued waiting for a response before being discarded. |
| 1.3.6.1.4.1.43.29.4.6.2 | Scalara3ComSysAgentProxyRemoteSmtRequests | read-write | deprecated | This object determines if this agent will proxy SMT requests to other FDDI stations. If the value of this object is true(1), this agent will proxy SMT requests… |
| 1.3.6.1.4.1.43.29.4.6.3 | Scalara3ComSysAgentRemoteSmtProxyRequestMaxAge | read-write | mandatory | The maximum time, in seconds, an SMT proxy request will remain queued waiting for a response before being discarded. Note that when the value of a3ComSysAgentP… |
| 1.3.6.1.4.1.43.29.4.6.4 | Scalara3ComSysAgentProxyRemoteSmtEvents | read-write | mandatory | This object determines if this agent will generate traps for SMT events occuring at other stations. If the value of this object is true(1), this agent will gen… |
| 1.3.6.1.4.1.43.29.4.6.5 | Tablea3ComSysAgentTrapDescriptionTable | not-accessible | mandatory | This table contains a listing of trap descriptions for each trap supported by this agent. This provides a relationship between a trap index, and the trap enter… |
| 1.3.6.1.4.1.43.29.4.6.5.1 | Rowa3ComSysAgentTrapDescriptionTableEntry | not-accessible | mandatory | Information relating a trap index to a specific trap enterprise oid and trap number. |
| 1.3.6.1.4.1.43.29.4.6.5.1.1 | Columna3ComSysAgentTrapDescriptionIndex | read-only | mandatory | A unique index corresponding to the trap described by this entry. This value of this object corresponding to a particular trap will remain constant accross sys… |
| 1.3.6.1.4.1.43.29.4.6.5.1.2 | Columna3ComSysAgentTrapEnterprise | read-only | mandatory | The enterpise under which the trap identified by this entry is defined. |
| 1.3.6.1.4.1.43.29.4.6.5.1.3 | Columna3ComSysAgentTrapNumber | read-only | mandatory | The number of the trap identified by this entry, within the enterprise where it is defined. |
| 1.3.6.1.4.1.43.29.4.6.6 | Tablea3ComSysAgentTrapDestinationTable | not-accessible | mandatory | This table contains information specifying which traps will be transmitted to a given destination address. The table is indexed by the destination address type… |
| 1.3.6.1.4.1.43.29.4.6.6.1 | Rowa3ComSysAgentTrapDestinationTableEntry | not-accessible | mandatory | Information relating a set of traps and a destination address to which each trap in ths set will be transmitted when it is generated. To create a new entry, se… |
| 1.3.6.1.4.1.43.29.4.6.6.1.1 | Columna3ComSysAgentTrapDestinationAddressType | read-only | mandatory | The type of address identified by this entry. |
| 1.3.6.1.4.1.43.29.4.6.6.1.2 | Columna3ComSysAgentTrapDestinationAddress | read-only | mandatory | The address, of the type specified by the corresponding value of a3ComSysAgentTrapDestinationAddressType, to which the set of traps identified by this entry ar… |
| 1.3.6.1.4.1.43.29.4.6.6.1.3 | Columna3ComSysAgentTrapDestinationTrapMask | read-write | mandatory | This value is a bit string that indicates which traps are enabled for the address identified by this entry. The octet string value is treated as a 64-bit value… |
| 1.3.6.1.4.1.43.29.4.6.6.1.4 | Columna3ComSysAgentTrapDestinationEntryStatus | read-write | mandatory | The status of the trap destination table entry. Setting this object to invalid(1) has the effect of removing the corresponding entry from the table. |
| 1.3.6.1.4.1.43.29.4.6.7 | Scalara3ComSysAgentReadCommunity | read-write | mandatory | This object is the read community string when access is made via SNMP, see RFC1157. |
| 1.3.6.1.4.1.43.29.4.6.8 | Scalara3ComSysAgentReadWriteCommunity | read-write | mandatory | This object is the read-write community string when access is made via SNMP, see RFC1157. The read-write community string is required to access this object. |
| 1.3.6.1.4.1.43.29.4.7 | Nodea3ComSysInterface | |||
| 1.3.6.1.4.1.43.29.4.7 | Nodea3ComSysSystemFanFailureEvent | The trap that is generated when one of the system fans fails. | ||
| 1.3.6.1.4.1.43.29.4.7.1 | Tablea3ComSysInterfaceLocationTable | not-accessible | mandatory | A list of interface location entries. A single entry exists in this list for each interface managed by this agent. |
| 1.3.6.1.4.1.43.29.4.7.1.1 | Rowa3ComSysInterfaceLocationEntry | not-accessible | mandatory | An interface location entry describes the location of a particular interface managed by this agent. |
| 1.3.6.1.4.1.43.29.4.7.1.1.1 | Columna3ComSysInterfaceLocationIfIndex | read-only | mandatory | The value of the MIB-II ifIndex corresponding to the interface identified by this entry. |
| 1.3.6.1.4.1.43.29.4.7.1.1.2 | Columna3ComSysInterfaceLocationInterfaceType | read-only | mandatory | The type of the physical implementation of the interface identified by this entry. |
| 1.3.6.1.4.1.43.29.4.7.1.1.3 | Columna3ComSysInterfaceLocationType | read-only | mandatory | The type of location where the interface identified by this entry is physically located. |
| 1.3.6.1.4.1.43.29.4.7.1.1.4 | Columna3ComSysInterfaceLocationTypeIndex | read-only | mandatory | The index of the location identified by the corresponding instance of a3ComSysInterfaceLocationType where the interface identified by this entry is physically … |
| 1.3.6.1.4.1.43.29.4.7.1.1.5 | Columna3ComSysInterfaceLocationLocalIndex | read-only | mandatory | The local index of the interface identified by this entry relative to its type specified by the corresponding value of a3ComSysInterfaceLocationInterfaceType, … |
| 1.3.6.1.4.1.43.29.4.7.1.1.6 | Columna3ComSysInterfaceLocationSystemModuleIndex | read-only | mandatory | The system module index of the interface idnetified by this entry. Ths index can be used to acquire the module information from the s2SysModuleCardGroup and th… |
| 1.3.6.1.4.1.43.29.4.8 | Nodea3ComSysEthernetPort | |||
| 1.3.6.1.4.1.43.29.4.8 | Nodea3ComSysModuleCardSysOverTemperatureEvent | The trap that is generated when the temperature of the system exceeds a certain threshold. This trap is generated from agents that support the a3ComSysModuleCa… | ||
| 1.3.6.1.4.1.43.29.4.8.1 | Scalara3ComSysEthernetPortCount | read-only | mandatory | The count of ethernet ports managed by this agent. |
| 1.3.6.1.4.1.43.29.4.8.2 | Tablea3ComSysEthernetPortTable | not-accessible | mandatory | A list of ethernet port entries. A single entry exists in this list for each ethernet port managed by this agent. |
| 1.3.6.1.4.1.43.29.4.8.2.1 | Rowa3ComSysEthernetPortEntry | not-accessible | mandatory | An ethernet port entry contains information about a particular ethernet port managed by this agent. |
| 1.3.6.1.4.1.43.29.4.8.2.1.1 | Columna3ComSysEthernetPortIndex | read-only | mandatory | The index of the ethernet port identified by this entry, relative to this agent. |
| 1.3.6.1.4.1.43.29.4.8.2.1.2 | Columna3ComSysEthernetPortIfIndex | read-only | mandatory | The value of the MIB-II ifIndex corresponding to the ethernet port identified by this entry. |
| 1.3.6.1.4.1.43.29.4.8.2.1.3 | Columna3ComSysEthernetPortLabel | read-write | mandatory | An ASCII text string describing the ethernet port identified by this entry. |
| 1.3.6.1.4.1.43.29.4.8.2.1.4 | Columna3ComSysEthernetPortLinkStatus | read-only | mandatory | The current value of the link status for the ethernet port identified by this entry. |
| 1.3.6.1.4.1.43.29.4.8.2.1.5 | Columna3ComSysEthernetPortType | read-only | mandatory | Specific port type description for the ethernet port identified by this entry. |
| 1.3.6.1.4.1.43.29.4.8.3 | Tablea3ComSysEthernetPortRateTable | not-accessible | mandatory | A list of ethernet port rate entries. A single entry exists in this list for each ethernet port, managed by this agent, which supports rate information. |
| 1.3.6.1.4.1.43.29.4.8.3.1 | Rowa3ComSysEthernetPortRateEntry | not-accessible | mandatory | An ethernet port rate entry contains rate statistics for a particular ethernet port managed by this agent. Rate statistics are calculated based on a one second… |
| 1.3.6.1.4.1.43.29.4.8.3.1.1 | Columna3ComSysEthernetPortRateIndex | read-only | mandatory | The index of the ethernet port identified by this entry, relative to this agent. |
| 1.3.6.1.4.1.43.29.4.8.3.1.2 | Columna3ComSysEthernetPortRateByteReceiveRate | read-only | mandatory | The average number of bytes received per second by the ethernet port identified by this entry during the most recent sampling period. |
| 1.3.6.1.4.1.43.29.4.8.3.1.3 | Columna3ComSysEthernetPortRatePeakByteReceiveRate | read-only | mandatory | The peak value of a3ComSysEthernetPortRateByteReceiveRate since the system was last initialized for the ethernet port identified by this entry. |
| 1.3.6.1.4.1.43.29.4.8.3.1.4 | Columna3ComSysEthernetPortRateFrameReceiveRate | read-only | mandatory | The average number of frames received per second by the ethernet port identified by this entry during the most recent sampling period. |
| 1.3.6.1.4.1.43.29.4.8.3.1.5 | Columna3ComSysEthernetPortRatePeakFrameReceiveRate | read-only | mandatory | The peak value of a3ComSysEthernetPortRateFrameReceiveRate since the system was last initialized for the ethernet port identified by this entry. |
| 1.3.6.1.4.1.43.29.4.8.3.1.6 | Columna3ComSysEthernetPortRateByteTransmitRate | read-only | mandatory | The average number of bytes transmitted per second by the ethernet port identified by this entry during the most recent sampling period. |
| 1.3.6.1.4.1.43.29.4.8.3.1.7 | Columna3ComSysEthernetPortRatePeakByteTransmitRate | read-only | mandatory | The peak value of a3ComSysEthernetPortRateByteTransmitRate since the system was last initialized for the ethernet port identified by this entry. |
| 1.3.6.1.4.1.43.29.4.8.3.1.8 | Columna3ComSysEthernetPortRateFrameTransmitRate | read-only | mandatory | The average number of frames transmitted per second by the ethernet port identified by this entry during the most recent sampling period. |
| 1.3.6.1.4.1.43.29.4.8.3.1.9 | Columna3ComSysEthernetPortRatePeakFrameTransmitRate | read-only | mandatory | The peak value of a3ComSysEthernetPortRateFrameTransmitRate since the system was last initialized for the ethernet port identified by this entry. |
| 1.3.6.1.4.1.43.29.4.9 | Nodea3ComSysModuleCardInsertEvent | The trap that is generated when a board is inserted into a particular modular slot. This trap is generated from agents that support the a3ComSysModuleCardInfoT… | ||
| 1.3.6.1.4.1.43.29.4.9 | Nodea3ComSysSmt | |||
| 1.3.6.1.4.1.43.29.4.9.1 | Scalara3ComSysSmtCount | read-only | mandatory | The count of SMTs managed by this agent. |
| 1.3.6.1.4.1.43.29.4.9.4 | Tablea3ComSysSmtFddiMacBeaconTable | not-accessible | mandatory | A list of FDDI MAC beacon entries. A single entry exists in this list for each FDDI MAC, managed by this agent, which supports MAC beacon history. |
| 1.3.6.1.4.1.43.29.4.9.4.1 | Rowa3ComSysSmtFddiMacBeaconEntry | not-accessible | mandatory | An FDDI MAC beacon entry contains information about a particular FDDI MAC's beacon history. |
| 1.3.6.1.4.1.43.29.4.9.4.1.1 | Columna3ComSysSmtFddiMacBeaconSmtIndex | read-only | mandatory | The index of the SMT instance identified by this entry, relative to this agent. |
| 1.3.6.1.4.1.43.29.4.9.4.1.2 | Columna3ComSysSmtFddiMacBeaconIndex | read-only | mandatory | The index of the FDDI MAC identified by this entry, within the SMT identified by this entry. |
| 1.3.6.1.4.1.43.29.4.9.4.1.3 | Columna3ComSysSmtFddiMacBeaconHistory | read-only | mandatory | This object gives a history of the most recent beacon information received on the FDDI MAC identified by this entry. It can contain up to a maximum of eight re… |
| 1.3.6.1.4.1.43.29.4.9.5 | Tablea3ComSysSmtFddiMacRateTable | not-accessible | mandatory | A list of FDDI MAC rate entries. A single entry exists in this list for each FDDI MAC, managed by this agent, which supports rate statistics. |
| 1.3.6.1.4.1.43.29.4.9.5.1 | Rowa3ComSysSmtFddiMacRateEntry | not-accessible | mandatory | An FDDI MAC rate entry contains rate statistics for a particular FDDI MAC managed by this agent. Rate statistics are calculated based on a one second sampling … |
| 1.3.6.1.4.1.43.29.4.9.5.1.1 | Columna3ComSysSmtFddiMacRateSmtIndex | read-only | mandatory | The index of the SMT instance identified by this entry, relative to this agent. |
| 1.3.6.1.4.1.43.29.4.9.5.1.2 | Columna3ComSysSmtFddiMacRateIndex | read-only | mandatory | The index of the FDDI MAC identified by this entry, within the SMT identified by this entry. |
| 1.3.6.1.4.1.43.29.4.9.5.1.3 | Columna3ComSysSmtFddiMacRateByteReceiveRate | read-only | mandatory | The average number of bytes received per second by the FDDI MAC identified by this entry during the most recent sampling period. |
| 1.3.6.1.4.1.43.29.4.9.5.1.4 | Columna3ComSysSmtFddiMacRatePeakByteReceiveRate | read-only | mandatory | The peak value of a3ComSysSmtFddiMacByteReceiveRate since the system was last initialized for the FDDI MAC identified by this entry. |
| 1.3.6.1.4.1.43.29.4.9.5.1.5 | Columna3ComSysSmtFddiMacRateFrameReceiveRate | read-only | mandatory | The average number of frames received per second by the FDDI MAC identified by this entry during the most recent sampling period. |
| 1.3.6.1.4.1.43.29.4.9.5.1.6 | Columna3ComSysSmtFddiMacRatePeakFrameReceiveRate | read-only | mandatory | The peak value of a3ComSysSmtFddiMacRateFrameReceiveRate since the system was last initialized for the FDDI MAC identified by this entry. |
| 1.3.6.1.4.1.43.29.4.9.5.1.7 | Columna3ComSysSmtFddiMacRateByteTransmitRate | read-only | mandatory | The average number of bytes transmitted per second by the FDDI MAC identified by this entry during the most recent sampling period. |
| 1.3.6.1.4.1.43.29.4.9.5.1.8 | Columna3ComSysSmtFddiMacRatePeakByteTransmitRate | read-only | mandatory | The peak value of a3ComSysSmtFddiMacByteTransmitRate since the system was last initialized for the FDDI MAC identified by this entry. |
| 1.3.6.1.4.1.43.29.4.9.5.1.9 | Columna3ComSysSmtFddiMacRateFrameTransmitRate | read-only | mandatory | The average number of frames transmitted per second by the FDDI MAC identified by this entry during the most recent sampling period. |
| 1.3.6.1.4.1.43.29.4.9.5.1.10 | Columna3ComSysSmtFddiMacRatePeakFrameTransmitRate | read-only | mandatory | The peak value of a3ComSysSmtFddiMacFrameTransmitRate since the system was last initialized for the FDDI MAC identified by this entry. |
| 1.3.6.1.4.1.43.29.4.9.6 | Tablea3ComSysSmtFddiPortTable | not-accessible | mandatory | A list of FDDI port entries. A single entry exists in this list for each FDDI port managed by this agent. |
| 1.3.6.1.4.1.43.29.4.9.6.1 | Rowa3ComSysSmtFddiPortEntry | not-accessible | mandatory | An FDDI port entry contains information about a particular FDDI port managed by this agent. |
| 1.3.6.1.4.1.43.29.4.9.6.1.1 | Columna3ComSysSmtFddiPortSmtIndex | read-only | mandatory | The index of the SMT instance identified by this entry, relative to this agent. |
| 1.3.6.1.4.1.43.29.4.9.6.1.2 | Columna3ComSysSmtFddiPortIndex | read-only | mandatory | The index of the FDDI port identified by this entry, within the SMT identified by this entry. |
| 1.3.6.1.4.1.43.29.4.9.6.1.3 | Columna3ComSysSmtFddiPortLocationType | read-only | mandatory | The type of location where the FDDI port identified by this entry is physically located. |
| 1.3.6.1.4.1.43.29.4.9.6.1.4 | Columna3ComSysSmtFddiPortLocationTypeIndex | read-only | mandatory | The index of the location identified by the corresponding instance of a3ComSysSmtFddiPortLocationType where the FDDI port identified by this entry is physicall… |
| 1.3.6.1.4.1.43.29.4.9.6.1.5 | Columna3ComSysSmtFddiPortLocationLocalIndex | read-only | mandatory | The local index of the FDDI port identified by this entry relative to the location specified by the corresponding values of a3ComSysSmtFddiPortLocationType and… |
| 1.3.6.1.4.1.43.29.4.9.6.1.6 | Columna3ComSysSmtFddiPortLabel | read-write | mandatory | An ASCII text string describing the FDDI port identified by this entry. |
| 1.3.6.1.4.1.43.29.4.9.7 | Tablea3ComSysSmtFddiMacLocationTable | not-accessible | mandatory | An FDDI MAC Location table contains information to assign an FDDI MAC to a different Location. The system must be rebooted after all changes to this table are … |
| 1.3.6.1.4.1.43.29.4.9.7.1 | Rowa3ComSysSmtFddiMacLocationEntry | not-accessible | mandatory | An FDDI MAC entry contains information to assign an FDDI MAC to a different Location. |
| 1.3.6.1.4.1.43.29.4.9.7.1.1 | Columna3ComSysSmtFddiMacLocationSmtIndex | read-only | mandatory | The index of the SMT instance identified by this entry, relative to the agent. |
| 1.3.6.1.4.1.43.29.4.9.7.1.2 | Columna3ComSysSmtFddiMacLocationIndex | read-only | mandatory | The index of the FDDI MAC instance identified by this entry, relative to the SMT identified by this entry. |
| 1.3.6.1.4.1.43.29.4.9.7.1.3 | Columna3ComSysSmtFddiMacCurrentLocation | read-only | mandatory | Indicates whether the MAC identified by this entry is assigned to a backplane FDDI station (internal) or an FDDI station configured on a module (external.) |
| 1.3.6.1.4.1.43.29.4.9.7.1.4 | Columna3ComSysSmtFddiMacRequestedLocation | read-write | mandatory | The Location which the MAC identified by this entry is to be assigned to during the next reboot. |
| 1.3.6.1.4.1.43.29.4.9.7.1.5 | Columna3ComSysSmtFddiMacAvailableLocation | read-only | mandatory | Indicates the Location(s) available for this MAC. A mac Location which can be modified to either the interanl backplane or an external FDDI port is indicated b… |
| 1.3.6.1.4.1.43.29.4.9.8 | Tablea3ComSysSmtFddiMacStationTable | not-accessible | mandatory | An FDDI station MAC table contains information to assign an FDDI MAC to an FDDI Station. The system must be rebooted after all changes to this table are comple… |
| 1.3.6.1.4.1.43.29.4.9.8.1 | Rowa3ComSysSmtFddiMacStationEntry | not-accessible | mandatory | An FDDI MAC entry contains information to assign an FDDI MAC to an FDDI Station. |
| 1.3.6.1.4.1.43.29.4.9.8.1.1 | Columna3ComSysSmtFddiMacStationSmtIndex | read-only | mandatory | The index of the SMT instance identified by this entry, relative to this agent. |
| 1.3.6.1.4.1.43.29.4.9.8.1.2 | Columna3ComSysSmtFddiMacStationIndex | read-only | mandatory | The index of the MAC instance identified by this entry, relative to the SMT identified by this entry. |
| 1.3.6.1.4.1.43.29.4.9.8.1.3 | Columna3ComSysSmtFddiMacCurrentStation | read-only | mandatory | Indicates which FDDI station that the FDDI MAC identified by this entry is assigned to. A value of 0 indicates that the mac is assigned to an external station.… |
| 1.3.6.1.4.1.43.29.4.9.8.1.4 | Columna3ComSysSmtFddiMacRequestedStation | read-write | mandatory | Indicates which FDDI station the FDDI MAC identified by this entry will be set to during the next system reboot. A value of 0 indicates an external station. Ot… |
| 1.3.6.1.4.1.43.29.4.9.8.1.5 | Columna3ComSysSmtFddiMacAvailableStations | read-only | mandatory | This value is a sum. Setting of the first bit (LSB) indicates that the MAC can be assigned to an external station. Available backplane stations are indicated b… |
| 1.3.6.1.4.1.43.29.4.9.9 | Tablea3ComSysSmtFddiPortStationTable | not-accessible | mandatory | An FDDI station Port table contains information to assign an FDDI Port to an FDDI Station. The system must be rebooted after all changes to this table are comp… |
| 1.3.6.1.4.1.43.29.4.9.9.1 | Rowa3ComSysSmtFddiPortStationEntry | not-accessible | mandatory | An FDDI Port entry contains information to assign an FDDI Port to an FDDI Station. |
| 1.3.6.1.4.1.43.29.4.9.9.1.1 | Columna3ComSysSmtFddiPortStationSmtIndex | read-only | mandatory | The index of the SMT instance identified by this entry, relative to this agent. |
| 1.3.6.1.4.1.43.29.4.9.9.1.2 | Columna3ComSysSmtFddiPortStationIndex | read-only | mandatory | The index of the Port instance identified by this entry, relative to the SMT indentified by this entry. |
| 1.3.6.1.4.1.43.29.4.9.9.1.3 | Columna3ComSysSmtFddiPortCurrentStation | read-only | mandatory | Indicates which FDDI station the FDDI Port identified by this entry is assigned to. A value of 0 indicates that the Port is assigned to an external station. Ot… |
| 1.3.6.1.4.1.43.29.4.9.9.1.4 | Columna3ComSysSmtFddiPortRequestedStation | read-write | mandatory | Indicates which FDDI station the FDDI port identified by this entry will be set to during the next system reboot. A value of 0 indicates an external station. O… |
| 1.3.6.1.4.1.43.29.4.9.9.1.5 | Columna3ComSysSmtFddiPortAvailableStations | read-only | mandatory | This value is a sum. Setting of the first bit indicates that the port can be assigned to an external station. Available backplane stations are indicated by add… |
| 1.3.6.1.4.1.43.29.4.10 | Nodea3ComSysBridge | |||
| 1.3.6.1.4.1.43.29.4.10 | Nodea3ComSysModuleCardExtractEvent | The trap that is generated when a board is extracted from a particular modular slot. This trap is generated from agents that support the a3ComSysModuleCardInfo… | ||
| 1.3.6.1.4.1.43.29.4.10.1 | Scalara3ComSysBridgeCount | read-only | mandatory | The count of bridges managed by this agent. |
| 1.3.6.1.4.1.43.29.4.10.2 | Tablea3ComSysBridgeTable | not-accessible | mandatory | A list of bridge entries. A single entry exists in this list for each bridge managed by this agent. |
| 1.3.6.1.4.1.43.29.4.10.2.1 | Rowa3ComSysBridgeEntry | not-accessible | mandatory | A bridge entry contains information about a particular bridge managed by this agent. |
| 1.3.6.1.4.1.43.29.4.10.2.1.1 | Columna3ComSysBridgeIndex | read-only | mandatory | The index of the bridge identified by this entry, relative to this agent. |
| 1.3.6.1.4.1.43.29.4.10.2.1.2 | Columna3ComSysBridgePortCount | read-only | mandatory | The number of bridge ports that the bridge identified by this entry controls. |
| 1.3.6.1.4.1.43.29.4.10.2.1.3 | Columna3ComSysBridgeAddressTableSize | read-only | mandatory | The size of the address table for the bridge identified by this entry. |
| 1.3.6.1.4.1.43.29.4.10.2.1.4 | Columna3ComSysBridgeAddressTableCount | read-only | mandatory | The current count of addresses in the address table for the bridge identified by this entry. |
| 1.3.6.1.4.1.43.29.4.10.2.1.5 | Columna3ComSysBridgeAddressTablePeakCount | read-only | mandatory | The peak count of addresses in the address table for the bridge identified by this entry, since the system was last initialized. |
| 1.3.6.1.4.1.43.29.4.10.2.1.6 | Columna3ComSysBridgeAddressThreshold | read-write | mandatory | A reporting threshold for the total number of addresses known for the bridge identified by this entry. When this threshold is reached, the event a3ComSysBridge… |
| 1.3.6.1.4.1.43.29.4.10.2.1.7 | Columna3ComSysBridgeMode | read-write | mandatory | The operational mode of the bridge identified by this entry. Note that bridges which report notSupported(3) will not support sets of this object, and that the … |
| 1.3.6.1.4.1.43.29.4.10.2.1.8 | Columna3ComSysBridgeBackbonePort | read-write | mandatory | The number of the port selected as the backbone segment port when the corresponding value of a3ComSysBridgeMode is is expressMode(1). The value of this object … |
| 1.3.6.1.4.1.43.29.4.10.2.1.9 | Columna3ComSysBridgeIpFragmentationEnabled | read-write | mandatory | A flag indicating whether or not IP fragmentation is enabled on this bridge. Note that bridges which report notSupported(3) will not support sets of this objec… |
| 1.3.6.1.4.1.43.29.4.10.2.1.10 | Columna3ComSysBridgeTrFddiTranslationMode | read-write | mandatory | The mode used to describe whether the embedded MAC addresses are byte-conjugated in order to convert them from Token Ring format to native FDDI format (and vic… |
| 1.3.6.1.4.1.43.29.4.10.2.1.11 | Columna3ComSysBridgeSTPGroupAddress | read-write | mandatory | Spanning tree bridge group address. The address cannot be changed if the spanning tree is enabled (a3ComSysBridgeStpEnabled). |
| 1.3.6.1.4.1.43.29.4.10.2.1.12 | Columna3ComSysBridgeSTPEnable | read-write | mandatory | This object indicates if spanning tree bridge feature is enabled or disabled. If enabled this value will equal true(1). |
| 1.3.6.1.4.1.43.29.4.10.2.1.13 | Columna3ComSysBridgeIpxSnapTranslationEnable | read-write | mandatory | This object indicates if the IPX 802.3-FDDI SNAP Translation bridge feature is enabled or disabled. If enabled this value will equal true(1). Note, this object… |
| 1.3.6.1.4.1.43.29.4.10.2.1.14 | Columna3ComSysBridgeLowLatencyEnable | read-write | mandatory | This object indicates if the bridge low latency feature is enabled or disabled. If enabled this value will equal true(1). Note, this object may not be supporte… |
| 1.3.6.1.4.1.43.29.4.10.2.1.15 | Columna3ComSysBridgeVlanMode | read-write | mandatory | This object indicates the VLAN types that this bridge will support. Open mode means that each VLAN within this bridge will be of the Open type; all VLANs withi… |
| 1.3.6.1.4.1.43.29.4.10.3 | Tablea3ComSysBridgePortTable | not-accessible | mandatory | A list of bridge port entries. A single entry exists in this list for each bridge port managed by this agent. |
| 1.3.6.1.4.1.43.29.4.10.3.1 | Rowa3ComSysBridgePortEntry | not-accessible | mandatory | A bridge port entry contains information about a particular bridge port managed by this agent. |
| 1.3.6.1.4.1.43.29.4.10.3.1.1 | Columna3ComSysBridgePortBridgeIndex | read-only | mandatory | The index of the bridge identified by this entry, relative to this agent. |
| 1.3.6.1.4.1.43.29.4.10.3.1.2 | Columna3ComSysBridgePortIndex | read-only | mandatory | The index of the bridge port identified by this entry, within the bridge identified by this entry. |
| 1.3.6.1.4.1.43.29.4.10.3.1.3 | Columna3ComSysBridgePortIfIndex | read-only | mandatory | The value of the MIB-II ifIndex corresponding to the bridge port identified by this entry. |
| 1.3.6.1.4.1.43.29.4.10.3.1.4 | Columna3ComSysBridgePortReceiveMulticastLimit | read-write | mandatory | This variable limits the number of multicast frames forwarded by this port over a 1 second interval. The minimum threshold limit may vary between platforms, bu… |
| 1.3.6.1.4.1.43.29.4.10.3.1.5 | Columna3ComSysBridgePortAddressAction | read-write | mandatory | This object, when read, always returns the value other(1). The behavior of setting this object to each of the acceptable values is as follows: freezeAddress: c… |
| 1.3.6.1.4.1.43.29.4.10.3.1.6 | Columna3ComSysBridgePortSpanningTreeFrameReceivedCounts | read-only | mandatory | The number of spanning tree frames received by the bridge port identified by this entry. |
| 1.3.6.1.4.1.43.29.4.10.3.1.7 | Columna3ComSysBridgePortReceiveBlockedDiscards | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry because the receiving bridge port was not in the 'forwarding' state. |
| 1.3.6.1.4.1.43.29.4.10.3.1.8 | Columna3ComSysBridgePortReceiveMulticastLimitExceededs | read-only | mandatory | The number of times the value of a3ComSysBridgePortReceiveMulticastLimit was exceeded for the port identified by this entry. |
| 1.3.6.1.4.1.43.29.4.10.3.1.9 | Columna3ComSysBridgePortReceiveMulticastLimitExceededDiscards | read-only | mandatory | The number of multicast/broadcast frames discarded by the bridge port identified by this entry because the corresponding value of a3ComSysBridgePortReceiveMult… |
| 1.3.6.1.4.1.43.29.4.10.3.1.10 | Columna3ComSysBridgePortReceiveSecurityDiscards | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry because they contained source addresses which were statically configured on another … |
| 1.3.6.1.4.1.43.29.4.10.3.1.11 | Columna3ComSysBridgePortReceiveUnknownDiscards | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry because the destination address was unknown. Note that this counter is only valid fo… |
| 1.3.6.1.4.1.43.29.4.10.3.1.12 | Columna3ComSysBridgePortReceiveOtherDiscards | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry because they contained either invalid (group) source addresses or source addresses b… |
| 1.3.6.1.4.1.43.29.4.10.3.1.13 | Columna3ComSysBridgePortReceiveErrorDiscards | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry because of internal bridge system errors (e.g., hardware and software address table … |
| 1.3.6.1.4.1.43.29.4.10.3.1.14 | Columna3ComSysBridgePortSameSegmentDiscards | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry because the destination address is known on the same network segment as the source a… |
| 1.3.6.1.4.1.43.29.4.10.3.1.15 | Columna3ComSysBridgePortTransmitBlockedDiscards | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry because the transmitting bridge port was not in the 'forwarding' state. |
| 1.3.6.1.4.1.43.29.4.10.3.1.16 | Columna3ComSysBridgePortReceiveAllPathFilteredFrames | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry due to user defined receive all path filters. |
| 1.3.6.1.4.1.43.29.4.10.3.1.17 | Columna3ComSysBridgePortReceiveMulticastPathFilteredFrames | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry due to user defined receive multicast path filters. |
| 1.3.6.1.4.1.43.29.4.10.3.1.18 | Columna3ComSysBridgePortTransmitAllPathFilteredFrames | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry due to user defined transmit all path filters. |
| 1.3.6.1.4.1.43.29.4.10.3.1.19 | Columna3ComSysBridgePortTransmitMulticastPathFilteredFrames | read-only | mandatory | The number of frames discarded by the bridge port identified by this entry due to user defined transmit multicast path filters. |
| 1.3.6.1.4.1.43.29.4.10.3.1.20 | Columna3ComSysBridgePortForwardedUnicastFrames | read-only | mandatory | The number of unicast frames which this port forwarded to a single destination port. |
| 1.3.6.1.4.1.43.29.4.10.3.1.21 | Columna3ComSysBridgePortForwardedUnicastOctets | read-only | mandatory | The number of octets contained in unicast frames which this port forwarded to a single destination port. |
| 1.3.6.1.4.1.43.29.4.10.3.1.22 | Columna3ComSysBridgePortForwardedMulticastFrames | read-only | mandatory | The number of multicast frames which this port forwarded. |
| 1.3.6.1.4.1.43.29.4.10.3.1.23 | Columna3ComSysBridgePortForwardedMulticastOctets | read-only | mandatory | The number of octets contained in multicast frames which this port forwarded. |
| 1.3.6.1.4.1.43.29.4.10.3.1.24 | Columna3ComSysBridgePortFloodedUnicastFrames | read-only | mandatory | The number of unicast frames which this port flooded to all other ports in the bridge. |
| 1.3.6.1.4.1.43.29.4.10.3.1.25 | Columna3ComSysBridgePortFloodedUnicastOctets | read-only | mandatory | The number of octets contained in unicast frames which this port flooded to all other ports in the bridge. |
| 1.3.6.1.4.1.43.29.4.10.3.1.26 | Columna3ComSysBridgePortStpMode | read-write | mandatory | The mode of the bridge port. |
| 1.3.6.1.4.1.43.29.4.10.3.1.27 | Columna3ComSysBridgePortReceiveMulticastLimitFrameType | read-write | mandatory | This object identifies the frames type(s) that are to be counted when determining if the receive multicast limit has been exceeded for this bridge port. Device… |
| 1.3.6.1.4.1.43.29.4.10.3.1.28 | Columna3ComSysBridgePortForwardedFrames | read-only | mandatory | The number of frames which this port forwarded. |
| 1.3.6.1.4.1.43.29.4.10.3.1.29 | Columna3ComSysBridgePortReceiveMulticastLimitMultiplier | read-only | mandatory | This variable determines the minimum setting for the multicast limit threshold. For example if this value equals 1000, and the a3ComSysBridgePortReceiveMultica… |
| 1.3.6.1.4.1.43.29.4.10.5 | Tablea3ComSysBridgePortAddressTable | not-accessible | mandatory | A list of bridge port address information. A single entry exists in this list for each learned address, accross all bridge ports and all bridges managed by thi… |
| 1.3.6.1.4.1.43.29.4.10.5.1 | Rowa3ComSysBridgePortAddressEntry | not-accessible | mandatory | An bridge port address entry contains information about a particular bridge port address. To create a new entry, set an instance of a3ComSysBridgePortAddressRe… |
| 1.3.6.1.4.1.43.29.4.10.5.1.1 | Columna3ComSysBridgePortAddressBridgeIndex | read-only | mandatory | The index of the bridge identified by this entry, relative to this agent. |
| 1.3.6.1.4.1.43.29.4.10.5.1.2 | Columna3ComSysBridgePortAddressPortIndex | read-only | mandatory | The index of the bridge port identified by this entry, within the bridge identified by this entry. |
| 1.3.6.1.4.1.43.29.4.10.5.1.3 | Columna3ComSysBridgePortAddressIndex | read-only | mandatory | The index of this address entry within the bridge address table for the bridge identified by this entry. This index ranges from 1 to the corresponding value of… |
| 1.3.6.1.4.1.43.29.4.10.5.1.4 | Columna3ComSysBridgePortAddressRemoteAddress | read-write | mandatory | The remote MAC address detected on the bridge port identified by to this entry. Setting this object results in an attempt to create a new entry in the table. S… |
| 1.3.6.1.4.1.43.29.4.10.5.1.5 | Columna3ComSysBridgePortAddressType | read-write | mandatory | This object, when read, always returns the value valid(1). Setting this object to invalid(2) will remove the corresponding address entry from the table. |
| 1.3.6.1.4.1.43.29.4.10.5.1.6 | Columna3ComSysBridgePortAddressIsStatic | read-write | mandatory | A value indicating whether this MAC address was statically configured or was dynamically learned. Note that isStatic(1) it the only valid for set operations. |
| 1.3.6.1.4.1.43.29.4.10.5.1.7 | Columna3ComSysBridgePortAddressStaticPort | read-only | mandatory | If the corresponding value of the object a3ComSysBridgePortAddressIsStatic is isStatic(1), this object indicates the local bridge port index (as reported by a3… |
| 1.3.6.1.4.1.43.29.4.10.5.1.8 | Columna3ComSysBridgePortAddressAge | read-only | mandatory | This object indicates the time, in seconds, elapsed since a packet containing this address as a source was last seen on the bridge port identified by this entr… |
| 1.3.6.1.4.1.43.29.4.10.6 | Scalara3ComSysBridgeStpGroupAddress | read-write | obsolete | Spanning tree bridge group address. The address cannot be changed if the spanning tree is enabled (a3ComSysBridgeStpEnabled). This object can now be found unde… |
| 1.3.6.1.4.1.43.29.4.10.7 | Scalara3ComSysBridgeStpEnable | read-write | obsolete | This object indicates if spanning tree bridge feature is enabled or disabled. If enabled this value will equal true(1). This object can now be found under the … |
| 1.3.6.1.4.1.43.29.4.11 | Nodea3ComSysIpRouter | |||
| 1.3.6.1.4.1.43.29.4.12 | Nodea3ComSysNetworkMonitor | |||
| 1.3.6.1.4.1.43.29.4.12.1 | Tablea3ComSysNetworkAnalyzerTable | not-accessible | mandatory | A list of analyzer entries. A single entry exists in this list for each bridge port configured for an analyzer. |
| 1.3.6.1.4.1.43.29.4.12.1.1 | Rowa3ComSysNetworkAnalyzerTableEntry | not-accessible | mandatory | An analyzer table entry contains information relating an analyzer port address to the bridge and port index for that analyzer. The effect of creating an entry … |
| 1.3.6.1.4.1.43.29.4.12.1.1.1 | Columna3ComSysNetworkAnalyzerBridgeIndex | read-only | mandatory | The index of the bridge relative to this agent where the analyzer identified by this entry is configured. |
| 1.3.6.1.4.1.43.29.4.12.1.1.2 | Columna3ComSysNetworkAnalyzerBridgePortIndex | read-only | mandatory | The index of the port relative to the bridge identified by this entry where the analyzer identified by this entry is configured. |
| 1.3.6.1.4.1.43.29.4.12.1.1.3 | Columna3ComSysNetworkAnalyzerPhysicalAddress | read-only | mandatory | The physical address of the bridge port identified by the corresponding values of a3ComSysNetworkAnalyzerBridgeIndex and a3ComSysNetworkAnayzerBridgePortIndex. |
| 1.3.6.1.4.1.43.29.4.12.1.1.4 | Columna3ComSysNetworkAnalyzerStatus | read-write | mandatory | The status of the entry. Setting the value of a non-existent instance of this object to valid(1) attempts to add the corresponding entry to the table. The effe… |
| 1.3.6.1.4.1.43.29.4.12.2 | Tablea3ComSysNetworkPortMonitorTable | not-accessible | mandatory | A list of monitor port entries. A single entry exists in this for each bridge port being monitored. |
| 1.3.6.1.4.1.43.29.4.12.2.1 | Rowa3ComSysNetworkPortMonitorTableEntry | not-accessible | mandatory | A port monitor table entry contains information relating a bridge port being monitored with the address of the analyzer which is being used to monitor the port… |
| 1.3.6.1.4.1.43.29.4.12.2.1.1 | Columna3ComSysNetworkPortMonitorBridgeIndex | read-only | mandatory | The index of the bridge relative to this agent where the monitored port identified by this entry is located. |
| 1.3.6.1.4.1.43.29.4.12.2.1.2 | Columna3ComSysNetworkPortMonitorBridgePortIndex | read-only | mandatory | The index of the port which is being monitored relative to the bridge identified by this entry. |
| 1.3.6.1.4.1.43.29.4.12.2.1.3 | Columna3ComSysNetworkPortMonitorAnalyzerAddress | read-write | mandatory | The physical address of the port where the analyzer, which is monitoring the port identified by this entry, is located. Setting the value of a non-existent ins… |
| 1.3.6.1.4.1.43.29.4.12.2.1.4 | Columna3ComSysNetworkPortMonitorStatus | read-write | mandatory | The status of the entry. Setting an existing instance of this object to invalid(2) attempts to remove the corresponding entry from the table. The effect of rem… |
| 1.3.6.1.4.1.43.29.4.13 | Nodea3ComSysTokenRingPort | |||
| 1.3.6.1.4.1.43.29.4.13.1 | Scalara3ComSysTokenRingPortCount | read-only | mandatory | The count of token ring ports managed by this agent. |
| 1.3.6.1.4.1.43.29.4.13.2 | Tablea3ComSysTokenRingPortTable | not-accessible | mandatory | A list of token ring port entries. A single entry exists in this list for each token ring port managed by this agent. |
| 1.3.6.1.4.1.43.29.4.13.2.1 | Rowa3ComSysTokenRingPortEntry | not-accessible | mandatory | A token ring port entry contains information about a particular token ring port managed by this agent. |
| 1.3.6.1.4.1.43.29.4.13.2.1.1 | Columna3ComSysTokenRingPortIndex | read-only | mandatory | The index of the token ring port identified by this entry, relative to this agent. |
| 1.3.6.1.4.1.43.29.4.13.2.1.2 | Columna3ComSysTokenRingPortIfIndex | read-only | mandatory | The value of the MIB-II ifIndex corresponding to the token ring port identified by this entry. |
| 1.3.6.1.4.1.43.29.4.13.2.1.3 | Columna3ComSysTokenRingPortLabel | read-write | mandatory | An ASCII text string describing the token ring port identified by this entry. |
| 1.3.6.1.4.1.43.29.4.13.2.1.4 | Columna3ComSysTokenRingPortInsertStatus | read-only | mandatory | The current value of the link status for the token ring port identified by this entry. |
| 1.3.6.1.4.1.43.29.4.13.2.1.5 | Columna3ComSysTokenRingPortType | read-only | mandatory | Specific port type description for the token ring port identified by this entry. |
| 1.3.6.1.4.1.43.29.4.13.2.1.6 | Columna3ComSysTokenRingPortMode | read-write | mandatory | The current mode of the port. The default mode (station) is used to connect a hub to the port. Lobe mode is used to direct connect a Token Ring station into th… |
| 1.3.6.1.4.1.43.29.4.13.2.1.7 | Columna3ComSysTokenRingPortSpeed | read-write | mandatory | The current speed of the port. The default speed is sixteenMegabit. |
| 1.3.6.1.4.1.43.29.4.13.2.1.8 | Columna3ComSysTokenRingPortLineErrors | read-only | mandatory | This counter is incremented when a frame or token is copied or repeated by a station, the E bit is zero in the frame or token and one of the following conditio… |
| 1.3.6.1.4.1.43.29.4.13.2.1.9 | Columna3ComSysTokenRingPortBurstErrors | read-only | mandatory | This counter is incremented when a station detects the absence of transitions for five half-bit timers (burst-five error). |
| 1.3.6.1.4.1.43.29.4.13.2.1.10 | Columna3ComSysTokenRingPortACErrors | read-only | mandatory | This counter is incremented when a station receives an AMP or SMP frame in which A is equal to C is equal to 0, and then receives another SMP frame with A is e… |
| 1.3.6.1.4.1.43.29.4.13.2.1.11 | Columna3ComSysTokenRingPortAbortTransErrors | read-only | mandatory | This counter is incremented when a station transmits an abort delimiter while transmitting. |
| 1.3.6.1.4.1.43.29.4.13.2.1.12 | Columna3ComSysTokenRingPortInternalErrors | read-only | mandatory | This counter is incremented when a station recognizes an internal error. |
| 1.3.6.1.4.1.43.29.4.13.2.1.13 | Columna3ComSysTokenRingPortLostFrameErrors | read-only | mandatory | This counter is incremented when a station is transmitting and its TRR timer expires. This condition denotes a condition where a transmitting station in strip … |
| 1.3.6.1.4.1.43.29.4.13.2.1.14 | Columna3ComSysTokenRingPortReceiveCongestionErrors | read-only | mandatory | This counter is incremented when a station recognizes a frame addressed to its specific address, but has no available buffer space indicating that the station … |
| 1.3.6.1.4.1.43.29.4.13.2.1.15 | Columna3ComSysTokenRingPortFrameCopiedErrors | read-only | mandatory | This counter is incremented when a station recognizes a frame addressed to its specific address and detects that the FS field A bits are set to 1 indicating a … |
| 1.3.6.1.4.1.43.29.4.13.2.1.16 | Columna3ComSysTokenRingPortTokenErrors | read-only | mandatory | This counter is incremented when a station acting as the active monitor recognizes an error condition that needs a token transmitted. |
| 1.3.6.1.4.1.43.29.4.13.2.1.17 | Columna3ComSysTokenRingPortSoftErrors | read-only | mandatory | The number of Soft Errors the interface has detected. It directly corresponds to the number of Report Error MAC frames that this interface has transmitted. Sof… |
| 1.3.6.1.4.1.43.29.4.13.2.1.18 | Columna3ComSysTokenRingPortHardErrors | read-only | mandatory | The number of times this interface has detected an immediately recoverable fatal error. It denotes the number of times this interface is either transmitting or… |
| 1.3.6.1.4.1.43.29.4.13.2.1.19 | Columna3ComSysTokenRingPortTransmitBeacons | read-only | mandatory | The number of times this interface has transmitted a beacon frame. |
| 1.3.6.1.4.1.43.29.4.13.2.1.20 | Columna3ComSysTokenRingPortLobeWires | read-only | mandatory | The number of times the interface has detected an open or short circuit in the lobe data path. The adapter will be closed when this condition occurs. |
| 1.3.6.1.4.1.43.29.4.13.2.1.21 | Columna3ComSysTokenRingPortRemoves | read-only | mandatory | The number of times the interface has received a Remove Ring Station MAC frame request. When this frame is received the interface will enter the close state. |
| 1.3.6.1.4.1.43.29.4.13.2.1.22 | Columna3ComSysTokenRingPortSingles | read-only | mandatory | The number of times the interface has sensed that it is the only station on the ring. This will happen if the interface is the first one up on a ring, or if th… |
| 1.3.6.1.4.1.43.29.4.13.2.1.23 | Columna3ComSysTokenRingPortFreqErrors | read-only | optional | The number of times the interface has detected that the frequency of the incoming signal differs from the expected frequency. |
| 1.3.6.1.4.1.43.29.4.13.2.1.24 | Columna3ComSysTokenRingPortRingStatus | read-only | mandatory | The current interface status which can be used to diagnose fluctuating problems that can occur on token rings, after a station has successfully been added to t… |
| 1.3.6.1.4.1.43.29.4.14 | Nodea3ComSysFtGroup | |||
| 1.3.6.1.4.1.43.29.4.14.1 | Tablea3ComSysFtTable | not-accessible | mandatory | A list of entries which describe file transfers. |
| 1.3.6.1.4.1.43.29.4.14.1.1 | Rowa3ComSysFtTableEntry | not-accessible | mandatory | A description of a particular file transfer entry. |
| 1.3.6.1.4.1.43.29.4.14.1.1.1 | Columna3ComSysFtIndex | read-only | mandatory | A unique index used to identifying this entry. |
| 1.3.6.1.4.1.43.29.4.14.1.1.2 | Columna3ComSysFtDirection | read-write | mandatory | Specifies the direction of the file transfer. |
| 1.3.6.1.4.1.43.29.4.14.1.1.3 | Columna3ComSysFtLocalStorageType | read-write | mandatory | The type of storage on the local system to be used as the source/destination for the file transfer. |
| 1.3.6.1.4.1.43.29.4.14.1.1.4 | Columna3ComSysFtLocalResourceType | read-write | mandatory | The type of resource on the local system to be used as the source/destination for the file transfer. |
| 1.3.6.1.4.1.43.29.4.14.1.1.5 | Columna3ComSysFtLocalResourceMask | read-write | mandatory | The indices of the resources on the local system to be used as the source/destination for the file transfer. The type of resource to which these indices apply … |
| 1.3.6.1.4.1.43.29.4.14.1.1.6 | Columna3ComSysFtLocalResourceAttribute | read-write | mandatory | An identifier which specifies the particular resource attribute on the local system which is the source/destination of the file transfer. The resource(s) to wh… |
| 1.3.6.1.4.1.43.29.4.14.1.1.7 | Columna3ComSysFtRemoteAddressType | read-write | mandatory | The type of address which is specified by the corresponding value of a3ComSysFtRemoteAddress. |
| 1.3.6.1.4.1.43.29.4.14.1.1.8 | Columna3ComSysFtRemoteAddress | read-write | mandatory | The address of the source/destination file on the remote system. |
| 1.3.6.1.4.1.43.29.4.14.1.1.9 | Columna3ComSysFtRemoteFileName | read-write | mandatory | The full path name of the source/destination file on the remote system. |
| 1.3.6.1.4.1.43.29.4.14.1.1.10 | Columna3ComSysFtRemoteUserName | read-write | mandatory | The user name to be used when requesting the file transfer to/from the remote system. |
| 1.3.6.1.4.1.43.29.4.14.1.1.11 | Columna3ComSysFtRemoteUserPassword | read-write | mandatory | The password to be used when requesting the file transfer to/from the remote system. When read, this object returns a zero length string. Note that, for securi… |
| 1.3.6.1.4.1.43.29.4.14.1.1.12 | Columna3ComSysFtForceTransfer | read-write | mandatory | Setting this object to true makes the agent ignore non-fatal (i.e. version/id mismatch) errors encountered during a file transfer request. |
| 1.3.6.1.4.1.43.29.4.14.1.1.13 | Columna3ComSysFtBytesTransferred | read-only | mandatory | The number of bytes successfully transferred. |
| 1.3.6.1.4.1.43.29.4.14.1.1.14 | Columna3ComSysFtStatus | read-only | mandatory | The status of the file transfer. |
| 1.3.6.1.4.1.43.29.4.14.1.1.15 | Columna3ComSysFtDetailedStatus | read-only | mandatory | Detailed status for the transfer for the particular local resource attribute specified by the corresponding values of a3ComSysFtLocalStorageType, a3ComSysFtLoc… |
| 1.3.6.1.4.1.43.29.4.14.1.1.16 | Columna3ComSysFtDetailedStatusString | read-only | mandatory | Detailed status description for the requested transfer. |
| 1.3.6.1.4.1.43.29.4.14.1.1.17 | Columna3ComSysFtOwnerString | read-write | mandatory | A string describing the creator/owner of this entry. |
| 1.3.6.1.4.1.43.29.4.14.1.1.18 | Columna3ComSysFtRowStatus | read-write | mandatory | The row status object controls the creation/deletion of rows in this table. Its semantics are the same as those for the RowStatus textual convention specified … |
| 1.3.6.1.4.1.43.29.4.14.2 | Nodea3ComSysFtResourceAttributes | |||
| 1.3.6.1.4.1.43.29.4.14.2.1 | Nodea3ComSysFtSystemAttributes | |||
| 1.3.6.1.4.1.43.29.4.14.2.1.1 | Nodea3ComSysFtSystemOperationalCode | |||
| 1.3.6.1.4.1.43.29.4.14.2.1.2 | Nodea3ComSysFtSystemConfiguration | |||
| 1.3.6.1.4.1.43.29.4.14.2.1.3 | Nodea3ComSysFtSystemBridgeFilterCode | |||
| 1.3.6.1.4.1.43.29.4.14.3 | Nodea3ComSysFtDetailedResourceStatus | |||
| 1.3.6.1.4.1.43.29.4.14.3.1 | Nodea3ComSysFtSystemDetailedStatus | |||
| 1.3.6.1.4.1.43.29.4.14.3.1.1 | Nodea3ComSysFtSysStatusNotApplicable | |||
| 1.3.6.1.4.1.43.29.4.14.3.1.2 | Nodea3ComSysFtSysStatusNoImageLabel | |||
| 1.3.6.1.4.1.43.29.4.14.3.1.3 | Nodea3ComSysFtSysStatusConfigIdMismatch | |||
| 1.3.6.1.4.1.43.29.4.14.3.1.4 | Nodea3ComSysFtSysStatusChecksumError | |||
| 1.3.6.1.4.1.43.29.4.14.3.1.5 | Nodea3ComSysFtSysStatusNvRamError | |||
| 1.3.6.1.4.1.43.29.4.14.3.1.6 | Nodea3ComSysFtSysStatusFlashError | |||
| 1.3.6.1.4.1.43.29.4.14.3.1.7 | Nodea3ComSysFtSysStatusNoRoom | |||
| 1.3.6.1.4.1.43.29.4.14.3.1.8 | Nodea3ComSysFtSysBridgeFilterNotApplicable | |||
| 1.3.6.1.4.1.43.29.4.14.3.1.9 | Nodea3ComSysFtSysBridgeFilterSyntaxError | |||
| 1.3.6.1.4.1.43.29.4.14.3.1.10 | Nodea3ComSysFtSysBridgeFilterdownloadError | |||
| 1.3.6.1.4.1.43.29.4.14.3.1.11 | Nodea3ComSysFtSysBridgeFilterNoRoom | |||
| 1.3.6.1.4.1.43.29.4.15 | Nodea3ComSysIpGroup | |||
| 1.3.6.1.4.1.43.29.4.15.1 | Nodea3ComSysIpBaseGroup | |||
| 1.3.6.1.4.1.43.29.4.15.2 | Nodea3ComSysIpInterfaceGroup | |||
| 1.3.6.1.4.1.43.29.4.15.2.1 | Scalara3ComSysIpInterfaceCount | read-only | mandatory | A count of the total number of IP interfaces configured. |
| 1.3.6.1.4.1.43.29.4.15.2.2 | Tablea3ComSysIpInterfaceTable | not-accessible | mandatory | A list of configured IP interfaces. |
| 1.3.6.1.4.1.43.29.4.15.2.2.1 | Rowa3ComSysIpInterfaceEntry | not-accessible | mandatory | An individual IP interface. |
| 1.3.6.1.4.1.43.29.4.15.2.2.1.1 | Columna3ComSysIpInterfaceIpStackIndex | read-only | mandatory | The index of the IP stack identified by this entry relative to this agent. |
| 1.3.6.1.4.1.43.29.4.15.2.2.1.2 | Columna3ComSysIpInterfaceAddr | read-only | mandatory | The IP address of this entry within the IP stack identified within this entry. |
| 1.3.6.1.4.1.43.29.4.15.2.2.1.3 | Columna3ComSysIpInterfaceNetMask | read-only | mandatory | The subnet mask associated with this IP interface. The value of the mask is an IP address with all the network bits set to 1 and all the host bits set to 0. |
| 1.3.6.1.4.1.43.29.4.15.2.2.1.4 | Columna3ComSysIpInterfaceIndex | read-write | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. lspIPInterfaceIndex maps to the same interface as identified by ifIn… |
| 1.3.6.1.4.1.43.29.4.15.2.2.1.5 | Columna3ComSysIpInterfaceBcastAddr | read-write | mandatory | This object represents the value of the least significant bit of this entry's direct broadcast address. For example, a value of one signifies that the host por… |
| 1.3.6.1.4.1.43.29.4.15.2.2.1.6 | Columna3ComSysIpInterfaceCost | read-write | mandatory | The route cost metric used for this entry. |
| 1.3.6.1.4.1.43.29.4.15.2.2.1.7 | Columna3ComSysIpInterfaceStatus | read-write | mandatory | The status column for this IP interface. This object can be set to: createAndGo(4) destroy(6) The following value may be read: active(1) Setting this object to… |
| 1.3.6.1.4.1.43.29.4.16 | Nodea3ComSysIpxGroup | |||
| 1.3.6.1.4.1.43.29.4.16.1 | Nodea3ComSysIpxBaseGroup | |||
| 1.3.6.1.4.1.43.29.4.16.2 | Nodea3ComSysIpxInterfaceGroup | |||
| 1.3.6.1.4.1.43.29.4.16.2.1 | Scalara3ComSysIpxInterfaceCount | read-only | mandatory | A count of the total number of IPX interfaces configured. |
| 1.3.6.1.4.1.43.29.4.16.2.2 | Tablea3ComSysIpxInterfaceTable | not-accessible | mandatory | A list of configured IPX interfaces. |
| 1.3.6.1.4.1.43.29.4.16.2.2.1 | Rowa3ComSysIpxInterfaceEntry | not-accessible | mandatory | An individual IPX interface. |
| 1.3.6.1.4.1.43.29.4.16.2.2.1.1 | Columna3ComSysIpxInterfaceIpxStackIndex | read-only | mandatory | The index of the IPX stack identified by this entry relative to this agent. |
| 1.3.6.1.4.1.43.29.4.16.2.2.1.2 | Columna3ComSysIpxInterfaceNetNumber | read-only | mandatory | The IPX Network Number of this entry. |
| 1.3.6.1.4.1.43.29.4.16.2.2.1.3 | Columna3ComSysIpxInterfaceIfIndex | read-write | mandatory | The ifIndex of the virtual interface that this IPX interface is is configured over. The a3ComSysIpxInterfaceIfIndex identifies a virtual interface, for example… |
| 1.3.6.1.4.1.43.29.4.16.2.2.1.4 | Columna3ComSysIpxInterfaceCost | read-write | mandatory | The cost associated with the IPX address of this entry. |
| 1.3.6.1.4.1.43.29.4.16.2.2.1.5 | Columna3ComSysIpxInterfaceFrameType | read-write | mandatory | The frame format used for routing frames on this IPX interface. The framing formats are for ethernet ports. There are two frame formats for FDDI ports: 802.2 a… |
| 1.3.6.1.4.1.43.29.4.16.2.2.1.6 | Columna3ComSysIpxInterfaceStatus | read-write | mandatory | The status column for this IPX interface. This OBJECT can be set to: createAndGo(4) destroy(6) The following value may be read: active(1) Setting this object o… |
| 1.3.6.1.4.1.43.29.4.17 | Nodea3ComSysAppleTalkGroup | |||
| 1.3.6.1.4.1.43.29.4.17.1 | Nodea3ComSysAppleTalkBaseGroup | |||
| 1.3.6.1.4.1.43.29.4.17.2 | Nodea3ComSysAppleTalkInterfaceGroup | |||
| 1.3.6.1.4.1.43.29.4.17.2.1 | Scalara3ComSysAtInterfaceCount | read-only | mandatory | A count of the total number of AppleTalk interfaces configured. |
| 1.3.6.1.4.1.43.29.4.17.2.2 | Tablea3ComSysAtInterfaceTable | not-accessible | mandatory | A list of AppleTalk ports for this entity. |
| 1.3.6.1.4.1.43.29.4.17.2.2.1 | Rowa3ComSysAtInterfaceEntry | not-accessible | mandatory | An individual appletalk interface entry. Appletalk entries with row status of active(1) cannot be modified but must set to destroy(6) and recreated. |
| 1.3.6.1.4.1.43.29.4.17.2.2.1.1 | Columna3ComSysAtInterfaceAtStackIndex | read-write | mandatory | The index of the Appletalk stack identified by this entry relative to this agent. Setting of this object is required for all interface creations. |
| 1.3.6.1.4.1.43.29.4.17.2.2.1.2 | Columna3ComSysAtInterfaceNetAddress | read-only | mandatory | The AppleTalk network address configured for this port. |
| 1.3.6.1.4.1.43.29.4.17.2.2.1.3 | Columna3ComSysAtInterfaceType | read-write | mandatory | The type of interface that is configured for this port. Setting of this object is required for all interface creations. |
| 1.3.6.1.4.1.43.29.4.17.2.2.1.4 | Columna3ComSysAtInterfaceNetStart | read-write | mandatory | The first AppleTalk network address in the range configured for this port. If this port is not a native AppleTalk port, this object shall have the value of two… |
| 1.3.6.1.4.1.43.29.4.17.2.2.1.5 | Columna3ComSysAtInterfaceNetEnd | read-write | mandatory | The last AppleTalk network address in the range configured for this port. If the network to which this AppleTalk port is connected is a non-extended network, o… |
| 1.3.6.1.4.1.43.29.4.17.2.2.1.6 | Columna3ComSysAtInterfaceZoneDefault | read-write | mandatory | The name of the default zone for this port. If this port only has one zone, that zone is represented here. Setting of this object is mandatory for interfaces w… |
| 1.3.6.1.4.1.43.29.4.17.2.2.1.7 | Columna3ComSysAtInterfaceZone1 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.43.29.4.17.2.2.1.8 | Columna3ComSysAtInterfaceZone2 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.43.29.4.17.2.2.1.9 | Columna3ComSysAtInterfaceZone3 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.43.29.4.17.2.2.1.10 | Columna3ComSysAtInterfaceZone4 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.43.29.4.17.2.2.1.11 | Columna3ComSysAtInterfaceZone5 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.43.29.4.17.2.2.1.12 | Columna3ComSysAtInterfaceZone6 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.43.29.4.17.2.2.1.13 | Columna3ComSysAtInterfaceZone7 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.43.29.4.17.2.2.1.14 | Columna3ComSysAtInterfaceZone8 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.43.29.4.17.2.2.1.15 | Columna3ComSysAtInterfaceZone9 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.43.29.4.17.2.2.1.16 | Columna3ComSysAtInterfaceZone10 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.43.29.4.17.2.2.1.17 | Columna3ComSysAtInterfaceZone11 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.43.29.4.17.2.2.1.18 | Columna3ComSysAtInterfaceZone12 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.43.29.4.17.2.2.1.19 | Columna3ComSysAtInterfaceZone13 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.43.29.4.17.2.2.1.20 | Columna3ComSysAtInterfaceZone14 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.43.29.4.17.2.2.1.21 | Columna3ComSysAtInterfaceZone15 | read-write | mandatory | Zone name in this entry's zone list. This object may only only be set for interfaces with a3ComSysAtInterfaceType equal to seedInterface(1). |
| 1.3.6.1.4.1.43.29.4.17.2.2.1.22 | Columna3ComSysAtInterfaceIfIndex | read-write | mandatory | The interface associated with this AppleTalk port. The interface identified by a particular value of this index is the same interface as identified by the same… |
| 1.3.6.1.4.1.43.29.4.17.2.2.1.23 | Columna3ComSysAtInterfaceState | read-only | mandatory | The current state of the appletalk interface. |
| 1.3.6.1.4.1.43.29.4.17.2.2.1.24 | Columna3ComSysAtInterfaceStatus | read-write | mandatory | The status column for this IP interface. This object can be set to: createAndGo(4) createAndWait(5) destroy(6) The following value may be read: active(1) notIn… |
| 1.3.6.1.4.1.43.29.4.18 | Nodea3ComSysModuleCardGroup | |||
| 1.3.6.1.4.1.43.29.4.18.1 | Scalara3ComSysModuleCardCount | read-only | mandatory | The current count of module components present in the system. |
| 1.3.6.1.4.1.43.29.4.18.2 | Tablea3ComSysModuleCardInfoTable | not-accessible | mandatory | A list of module card information entries. A single entry exists in this list for each modular component in the system. |
| 1.3.6.1.4.1.43.29.4.18.2.1 | Rowa3ComSysModuleCardInfoEntry | not-accessible | mandatory | A module card info entry contains information about a particular modular component within the system. |
| 1.3.6.1.4.1.43.29.4.18.2.1.1 | Columna3ComSysModuleCardInfoIndex | read-only | mandatory | The index of the modular component identified by this entry. |
| 1.3.6.1.4.1.43.29.4.18.2.1.2 | Columna3ComSysModuleCardInfoFamily | read-only | mandatory | The family code for this module. |
| 1.3.6.1.4.1.43.29.4.18.2.1.3 | Columna3ComSysModuleCardInfoGenericType | read-only | mandatory | The generic type code for this module. |
| 1.3.6.1.4.1.43.29.4.18.2.1.4 | Columna3ComSysModuleCardInfoSpecificType | read-only | mandatory | The specific type code for this module. |
| 1.3.6.1.4.1.43.29.4.18.2.1.5 | Columna3ComSysModuleCardInfoPartNumber | read-only | mandatory | The specific part number for this module. |
| 1.3.6.1.4.1.43.29.4.18.2.1.6 | Columna3ComSysModuleCardInfoManufacturingDate | read-only | mandatory | The date that this module was manufactured in the format mm/dd/yyyy. |
| 1.3.6.1.4.1.43.29.4.18.2.1.7 | Columna3ComSysModuleCardInfoModuleSerialNumber | read-only | mandatory | 3Com serial number. |
| 1.3.6.1.4.1.43.29.4.18.2.1.8 | Columna3ComSysModuleCardInfoTLASerialNumber | read-only | mandatory | TOP level assembly serial number for boards with non-removable daughter cards. Null string for all other board types. |
| 1.3.6.1.4.1.43.29.4.18.2.1.9 | Columna3ComSysModuleCardInfo3CNumber | read-only | mandatory | On a backplane or non-removable module this is the 3C number of the chassis. On a removable module this is the 3C number of the module. |
| 1.3.6.1.4.1.43.29.4.18.2.1.10 | Columna3ComSysModuleCardInfoICTTestStatus | read-only | mandatory | 1 equals test passed, or greater than 1 identifies the test number failure (0 or FF indicates field yet not written). |
| 1.3.6.1.4.1.43.29.4.18.2.1.11 | Columna3ComSysModuleCardInfoICTTestRevision | read-only | mandatory | Manufacturing ATE test revision number (XX.XX). |
| 1.3.6.1.4.1.43.29.4.18.2.1.12 | Columna3ComSysModuleCardInfoSystemTestStatus | read-only | mandatory | 1 equals test passed, or greater than 1 identifies the test number failure (0 or FF indicates field yet not written). |
| 1.3.6.1.4.1.43.29.4.18.2.1.13 | Columna3ComSysModuleCardInfoFunctionalTestStatus | read-only | mandatory | 1 equals test passed, or greater than 1 identifies the test number failure (0 or FF indicates field yet not written). |
| 1.3.6.1.4.1.43.29.4.18.2.1.14 | Columna3ComSysModuleCardInfoFunctionalTestRevision | read-only | mandatory | Manufacturing functional test revision number (XX.XX). |
| 1.3.6.1.4.1.43.29.4.18.2.1.15 | Columna3ComSysModuleCardInfoBoardRevision | read-only | mandatory | Board revision code. |
| 1.3.6.1.4.1.43.29.4.18.2.1.16 | Columna3ComSysModuleCardInfoRuntimeHours | read-only | mandatory | A total count of the number of hours this module has been in operation. |
| 1.3.6.1.4.1.43.29.4.19 | Nodea3ComSysDiagnosticsGroup | |||
| 1.3.6.1.4.1.43.29.4.19.1 | Tablea3ComSysDiagnosticsInfoTable | not-accessible | mandatory | A list of module card information entries. A single entry exists in this list for each modular component in the system. |
| 1.3.6.1.4.1.43.29.4.19.1.1 | Rowa3ComSysDiagnosticsInfoEntry | not-accessible | mandatory | A diagnostics info entry contains information about a particular diagnostics event on a modular component within the system. |
| 1.3.6.1.4.1.43.29.4.19.1.1.1 | Columna3ComSysDiagnosticsInfoIndex | read-only | mandatory | The index of the diagnostics modular component identified by this entry. |
| 1.3.6.1.4.1.43.29.4.19.1.1.2 | Columna3ComSysDiagnosticsInfoPOVDiagnosticsRevision | read-only | mandatory | The revision of the POV (power on verification) diagnostics software at the most recent failure. |
| 1.3.6.1.4.1.43.29.4.19.1.1.3 | Columna3ComSysDiagnosticsInfoExtendedDiagnosticsRevision | read-only | mandatory | The revision of the extended diagnostics software at the most recent failure. |
| 1.3.6.1.4.1.43.29.4.19.1.1.4 | Columna3ComSysDiagnosticsInfoDiagnosticFailureCode | read-only | mandatory | The code written by the diagnostics at the most recent failure. This identifies both the test number and failure code in the following format: <testNumber>-<er… |
| 1.3.6.1.4.1.43.29.4.19.1.1.5 | Columna3ComSysDiagnosticsInfoDiagnosticFailureDateTime | read-only | mandatory | The date and time of the most recent diagnostic failure for the module. |
| 1.3.6.1.4.1.43.29.4.19.1.1.6 | Columna3ComSysDiagnosticsInfoDiagnosticFailureSlotNumber | read-only | mandatory | The slot number (network adapter cards only) of the most recent diagnostic failure for the module. |
| 1.3.6.1.4.1.43.29.4.19.1.1.7 | Columna3ComSysDiagnosticsInfoDiagnosticFailureCounter | read-only | mandatory | The total number of diagnostic failures logged against this module. |
| 1.3.6.1.4.1.43.29.4.19.1.1.8 | Columna3ComSysDiagnosticsInfoDiagnosticFieldDOACounter | read-only | mandatory | The total number of failures occurring at this module during the first 48 hours of operation. |
| 1.3.6.1.4.1.43.29.10 | NodeswitchingSystemsFddiMibGroups |