A3COM-SWITCHING-SYSTEMS-TOKEN-RING-MIB
31 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43 | Nodea3Com | |||
| 1.3.6.1.4.1.43.29 | NodeswitchingSystemsMibs | |||
| 1.3.6.1.4.1.43.29.4 | Nodea3ComSwitchingSystemsMib | |||
| 1.3.6.1.4.1.43.29.4.13 | Nodea3ComSysTokenRingPort | |||
| 1.3.6.1.4.1.43.29.4.13.1 | Scalara3ComSysTokenRingPortCount | read-only | mandatory | The count of token ring ports managed by this agent. |
| 1.3.6.1.4.1.43.29.4.13.2 | Tablea3ComSysTokenRingPortTable | not-accessible | mandatory | A list of token ring port entries. A single entry exists in this list for each token ring port managed by this agent. |
| 1.3.6.1.4.1.43.29.4.13.2.1 | Rowa3ComSysTokenRingPortEntry | not-accessible | mandatory | A token ring port entry contains information about a particular token ring port managed by this agent. |
| 1.3.6.1.4.1.43.29.4.13.2.1.1 | Columna3ComSysTokenRingPortIndex | read-only | mandatory | The index of the token ring port identified by this entry, relative to this agent. |
| 1.3.6.1.4.1.43.29.4.13.2.1.2 | Columna3ComSysTokenRingPortIfIndex | read-only | mandatory | The value of the MIB-II ifIndex corresponding to the token ring port identified by this entry. |
| 1.3.6.1.4.1.43.29.4.13.2.1.3 | Columna3ComSysTokenRingPortLabel | read-write | mandatory | An ASCII text string describing the token ring port identified by this entry. |
| 1.3.6.1.4.1.43.29.4.13.2.1.4 | Columna3ComSysTokenRingPortInsertStatus | read-only | mandatory | The current value of the link status for the token ring port identified by this entry. |
| 1.3.6.1.4.1.43.29.4.13.2.1.5 | Columna3ComSysTokenRingPortType | read-only | mandatory | Specific port type description for the token ring port identified by this entry. |
| 1.3.6.1.4.1.43.29.4.13.2.1.6 | Columna3ComSysTokenRingPortMode | read-write | mandatory | The current mode of the port. The default mode (station) is used to connect a hub to the port. Lobe mode is used to direct connect a Token Ring station into th… |
| 1.3.6.1.4.1.43.29.4.13.2.1.7 | Columna3ComSysTokenRingPortSpeed | read-write | mandatory | The current speed of the port. The default speed is sixteenMegabit. |
| 1.3.6.1.4.1.43.29.4.13.2.1.8 | Columna3ComSysTokenRingPortLineErrors | read-only | mandatory | This counter is incremented when a frame or token is copied or repeated by a station, the E bit is zero in the frame or token and one of the following conditio… |
| 1.3.6.1.4.1.43.29.4.13.2.1.9 | Columna3ComSysTokenRingPortBurstErrors | read-only | mandatory | This counter is incremented when a station detects the absence of transitions for five half-bit timers (burst-five error). |
| 1.3.6.1.4.1.43.29.4.13.2.1.10 | Columna3ComSysTokenRingPortACErrors | read-only | mandatory | This counter is incremented when a station receives an AMP or SMP frame in which A is equal to C is equal to 0, and then receives another SMP frame with A is e… |
| 1.3.6.1.4.1.43.29.4.13.2.1.11 | Columna3ComSysTokenRingPortAbortTransErrors | read-only | mandatory | This counter is incremented when a station transmits an abort delimiter while transmitting. |
| 1.3.6.1.4.1.43.29.4.13.2.1.12 | Columna3ComSysTokenRingPortInternalErrors | read-only | mandatory | This counter is incremented when a station recognizes an internal error. |
| 1.3.6.1.4.1.43.29.4.13.2.1.13 | Columna3ComSysTokenRingPortLostFrameErrors | read-only | mandatory | This counter is incremented when a station is transmitting and its TRR timer expires. This condition denotes a condition where a transmitting station in strip … |
| 1.3.6.1.4.1.43.29.4.13.2.1.14 | Columna3ComSysTokenRingPortReceiveCongestionErrors | read-only | mandatory | This counter is incremented when a station recognizes a frame addressed to its specific address, but has no available buffer space indicating that the station … |
| 1.3.6.1.4.1.43.29.4.13.2.1.15 | Columna3ComSysTokenRingPortFrameCopiedErrors | read-only | mandatory | This counter is incremented when a station recognizes a frame addressed to its specific address and detects that the FS field A bits are set to 1 indicating a … |
| 1.3.6.1.4.1.43.29.4.13.2.1.16 | Columna3ComSysTokenRingPortTokenErrors | read-only | mandatory | This counter is incremented when a station acting as the active monitor recognizes an error condition that needs a token transmitted. |
| 1.3.6.1.4.1.43.29.4.13.2.1.17 | Columna3ComSysTokenRingPortSoftErrors | read-only | mandatory | The number of Soft Errors the interface has detected. It directly corresponds to the number of Report Error MAC frames that this interface has transmitted. Sof… |
| 1.3.6.1.4.1.43.29.4.13.2.1.18 | Columna3ComSysTokenRingPortHardErrors | read-only | mandatory | The number of times this interface has detected an immediately recoverable fatal error. It denotes the number of times this interface is either transmitting or… |
| 1.3.6.1.4.1.43.29.4.13.2.1.19 | Columna3ComSysTokenRingPortTransmitBeacons | read-only | mandatory | The number of times this interface has transmitted a beacon frame. |
| 1.3.6.1.4.1.43.29.4.13.2.1.20 | Columna3ComSysTokenRingPortLobeWires | read-only | mandatory | The number of times the interface has detected an open or short circuit in the lobe data path. The adapter will be closed when this condition occurs. |
| 1.3.6.1.4.1.43.29.4.13.2.1.21 | Columna3ComSysTokenRingPortRemoves | read-only | mandatory | The number of times the interface has received a Remove Ring Station MAC frame request. When this frame is received the interface will enter the close state. |
| 1.3.6.1.4.1.43.29.4.13.2.1.22 | Columna3ComSysTokenRingPortSingles | read-only | mandatory | The number of times the interface has sensed that it is the only station on the ring. This will happen if the interface is the first one up on a ring, or if th… |
| 1.3.6.1.4.1.43.29.4.13.2.1.23 | Columna3ComSysTokenRingPortFreqErrors | read-only | mandatory | The number of times the interface has detected that the frequency of the incoming signal differs from the expected frequency. |
| 1.3.6.1.4.1.43.29.4.13.2.1.24 | Columna3ComSysTokenRingPortRingStatus | read-only | mandatory | The current interface status which can be used to diagnose fluctuating problems that can occur on token rings, after a station has successfully been added to t… |