A3COM0017-STACK-CONFIG
28 objects
No module-level DESCRIPTION found.
Imported Objects
| A3COM0004-GENERIC | superStackIIconfig |
| RFC-1212 | OBJECT-TYPE |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.10.27.1 | NodestackConfiguration | |||
| 1.3.6.1.4.1.43.10.27.1.1 | TablestackConfigTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.10.27.1.1.1 | RowstackConfigEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.10.27.1.1.1.1 | ColumnstackUnitLocation | not-accessible | mandatory | Used to identify individual units in the stack. Note that this value will usually be contiguous, but that gaps may be present due, for example, to unpowered un… |
| 1.3.6.1.4.1.43.10.27.1.1.1.2 | ColumnstackUnitAddress | read-only | mandatory | Every conformant unit in the SuperStack II system will have a unique physical (MAC) address by which it can be recognised. Note that the location index on this… |
| 1.3.6.1.4.1.43.10.27.1.1.1.3 | ColumnstackUnitLastReset | read-only | mandatory | This is the time in hundredths of a second, since this unit last reset (ie that units concept of sysUpTime). Note that if a unit is not operational then this o… |
| 1.3.6.1.4.1.43.10.27.1.1.1.4 | ColumnstackUnitType | read-only | mandatory | This is an integer type identifier for this unit. The values of this integer are administered by allocating a MIB object identifier for each type of unit from … |
| 1.3.6.1.4.1.43.10.27.1.1.1.5 | ColumnstackUnitDesc | read-only | mandatory | This is a text string which describes this unit. If a unit cannot provide a name then the value of this object will be an empty string. |
| 1.3.6.1.4.1.43.10.27.1.1.1.6 | ColumnstackUnitName | read-write | mandatory | This is a simple text string which can be used by an application to assign a text name to a unit. By default this string is empty. If a management application … |
| 1.3.6.1.4.1.43.10.27.1.1.1.7 | ColumnstackUnitState | read-only | mandatory | This object represents the best known state of a unit in the stack. The unknown state is not expected to be used, but may exist because of loosely integrated c… |
| 1.3.6.1.4.1.43.10.27.1.1.1.8 | ColumnstackUnitManagementType | read-only | mandatory | This object can be used to determine the management method used to access the agent in this unit. The options are: unknown: The unit has not reported any manag… |
| 1.3.6.1.4.1.43.10.27.1.1.1.9 | ColumnstackUnitCapabilities | read-only | mandatory | This object describes the capabilities of this particular unit. This is used in conjunction with the upgrade level of the stack to enable a management applicat… |
| 1.3.6.1.4.1.43.10.27.1.1.1.10 | ColumnstackUnitPromVersion | read-only | mandatory | This is the version number of the PROM on the unit. If the unit has no PROM, does not correctly report the PROM version or is currently non-operational then th… |
| 1.3.6.1.4.1.43.10.27.1.1.1.11 | ColumnstackUnitHWVersion | read-only | mandatory | This is the hardware version of this unit, expressed as a string. Note that if the hardware version is not available for this particular unit then the version … |
| 1.3.6.1.4.1.43.10.27.1.1.1.12 | ColumnstackUnitSWVersion | read-only | mandatory | This is the software version number of this unit. The software version number is a string. Note that if a unit does not make its version number information ava… |
| 1.3.6.1.4.1.43.10.27.1.1.1.13 | ColumnstackUnitSerialNumber | read-only | mandatory | This is the serial number for this unit. The number is globally unique and expressed as a textual string. |
| 1.3.6.1.4.1.43.10.27.1.1.1.14 | ColumnstackUnitAttention | read-write | mandatory | Some of the units in the stack will contain a mechanism for drawing attention to that unit. This is useful for directing maintainance personnel. The method oft… |
| 1.3.6.1.4.1.43.10.27.1.1.1.15 | ColumnstackUnitMgmtInterface | read-only | mandatory | If a unit in the stack participates in the distributed SNMP stack then it will have an instance of this object (stackUnitManagementType = 'distributed'). The o… |
| 1.3.6.1.4.1.43.10.27.1.1.1.16 | ColumnstackUnitSummary | read-only | mandatory | This object provides a summary of this units configuration in order to improve the performance of the management applications. The information in this object i… |
| 1.3.6.1.4.1.43.10.27.1.1.1.17 | ColumnstackUnitSlipMgmtInterface | read-only | mandatory | If a unit in the stack participates in the distributed SNMP stack then it will have an instance of this object (stackUnitManagementType = 'distributed'). The o… |
| 1.3.6.1.4.1.43.10.27.2 | NodestackAddressInformation | |||
| 1.3.6.1.4.1.43.10.27.2.1 | TablestackAddressTable | not-accessible | mandatory | This table contains entries for units in the stack which have active inband communications stacks. The table comprises of a set of entries for each unit, each … |
| 1.3.6.1.4.1.43.10.27.2.1.1 | RowstackAddressEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.10.27.2.1.1.1 | ColumnstackAddressNumber | read-only | mandatory | This identifies one of a number of different addresses for this unit. This is a second index column for this table, the first being the unit number shared with… |
| 1.3.6.1.4.1.43.10.27.2.1.1.2 | ColumnstackAddressType | read-write | mandatory | |
| 1.3.6.1.4.1.43.10.27.2.1.1.3 | ColumnstackAddress | read-write | mandatory | The address. |
| 1.3.6.1.4.1.43.10.27.4 | NodestackSysObjIdentities | |||
| 1.3.6.1.4.1.43.10.27.5 | NodestackUnitTypes |