A3COM0019-RMON-REMOTE-POLL
16 objects
No module-level DESCRIPTION found.
Imported Objects
| A3COM0027-RMON-EXTENSIONS | remotePoll |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1213-MIB | DisplayString |
| RMON-MIB | EntryStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.10.25.1.1 | TableremPollTable | not-accessible | mandatory | This table is used to provide remote device monitoring facilities. This table allows a list of network devices to be set up and polled regularly (or only once)… |
| 1.3.6.1.4.1.43.10.25.1.1.1 | RowremPollTableEntry | not-accessible | mandatory | A table used to define device monitoring. |
| 1.3.6.1.4.1.43.10.25.1.1.1.1 | ColumnremPollIndex | not-accessible | mandatory | Unique identifier of a row in the Poll Table. This index should be treated in the same way as indices of other RMON tables. The actual number of rows that can … |
| 1.3.6.1.4.1.43.10.25.1.1.1.2 | ColumnremPollIfIndex | read-write | mandatory | Identifies the entry in the ifTable which is to be used as the source of the poll packet. This object may not be modified if the associated remPollStatus objec… |
| 1.3.6.1.4.1.43.10.25.1.1.1.3 | ColumnremPollAddress | read-write | mandatory | This DisplayString is the network address of the device to monitor. Typically this is an IP, MAC or IPX address. The following formats can be used. IP nnn.nnn.… |
| 1.3.6.1.4.1.43.10.25.1.1.1.4 | ColumnremPollProtocol | read-write | mandatory | This defines the protocol with which to monitor the device. Writing an address to the remPollAddress field causes a default remPollProtocol value to be setup. … |
| 1.3.6.1.4.1.43.10.25.1.1.1.6 | ColumnremPollTimeout | read-write | mandatory | The time-out value in hundreds of a second for each request packet. If a device replies to a request packet within the specified time-out, then the poll is jud… |
| 1.3.6.1.4.1.43.10.25.1.1.1.7 | ColumnremPollAttempts | read-write | mandatory | The number of unsuccessful requests necessary before deciding that the device is definitely not responding. This object may not be modified if the associated r… |
| 1.3.6.1.4.1.43.10.25.1.1.1.8 | ColumnremPollPeriod | read-write | mandatory | The device will be polled every remPollPeriod seconds. The first poll is sent as soon as the remPollStatus is set to valid(1). To prevent overlapping polls, th… |
| 1.3.6.1.4.1.43.10.25.1.1.1.9 | ColumnremPollLastRequest | read-only | mandatory | This is the value of sysUpTime at which the most recent request packet was sent. To avoid temporary inconsistancies between the values of remPollLastRequest an… |
| 1.3.6.1.4.1.43.10.25.1.1.1.10 | ColumnremPollLastReply | read-only | mandatory | This is the value of sysUpTime at which the most recent reply packet was received. The device was responding at this time. The relationship of sysUpTime, remPo… |
| 1.3.6.1.4.1.43.10.25.1.1.1.11 | ColumnremPollInformation | read-only | mandatory | After each successful poll, this field is updated with some protocol specific information that was gleaned from the packet exchange. For the IPX protocol, this… |
| 1.3.6.1.4.1.43.10.25.1.1.1.12 | ColumnremPollSuccessEventIndex | read-write | mandatory | The index of the eventEntry that is used when a successful poll is made after a number of unsuccessful polls. The eventEntry identified by a particular value o… |
| 1.3.6.1.4.1.43.10.25.1.1.1.13 | ColumnremPollFailureEventIndex | read-write | mandatory | The index of the eventEntry that is used when an unsuccessful poll is made after a number of successful polls. The eventEntry identified by a particular value … |
| 1.3.6.1.4.1.43.10.25.1.1.1.14 | ColumnremPollOwner | read-write | mandatory | The RMON OwnerString conventions are used here to help control the multi-manager situations. |
| 1.3.6.1.4.1.43.10.25.1.1.1.15 | ColumnremPollStatus | read-write | mandatory | This object controls the creation and deletion of entries in the remPollTable. The RMON EntryStatus conventions are used. |