A3COM0054-BRASICA2-SPECIFIC
18 objects
No module-level DESCRIPTION found.
Imported Objects
| A3COM0004-GENERIC | brasica2 |
| RFC-1212 | OBJECT-TYPE |
| RFC1213-MIB | ifIndex |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.10.34.1 | NodestackConfigGroup | |||
| 1.3.6.1.4.1.43.10.34.1.1 | ScalarprConStackFwdingMode | read-write | mandatory | This object controls whether cut-thru is enabled on the stack. Enabling cut-thru can help to minimise the delay experienced by packets before they are forwarde… |
| 1.3.6.1.4.1.43.10.34.1.2 | ScalarprConStackPaceMode | read-write | mandatory | This object specifies the type of backoff algorithm used on the units in the stack. Any port can use the standard ethernet algorithm or, for PACE applications,… |
| 1.3.6.1.4.1.43.10.34.1.3 | ScalarprConStackVLANConfigMode | read-write | mandatory | This object specifies the VLAN mode to be used. Setting it to portMode(2) requires the user to configure each port's VLAN membership individually, whereas auto… |
| 1.3.6.1.4.1.43.10.34.1.4 | ScalarprConStackRAPStudyPort | read-write | mandatory | This determines the ifIndex of the port a user wishes to monitor on the copy port. Monitoring causes all data from the study port to be copied to the copy port… |
| 1.3.6.1.4.1.43.10.34.1.5 | ScalarprConStackRAPCopyPort | read-write | mandatory | This is the value of ifIndex specifying the port to which data will be copied (mirrored), and must be set to a valid value, along with the study port, before m… |
| 1.3.6.1.4.1.43.10.34.1.6 | ScalarprConStackRAPEnable | read-write | mandatory | This object controls the Roving Analysis Port (RAP) feature in conjunction with prConStackRAPStudyPort and prConStackRAPCopyPort. The RAP feature allows all fr… |
| 1.3.6.1.4.1.43.10.34.1.7 | ScalarprConStackBridgeMode | read-write | mandatory | The value of this object determines whether the switch is to operate as a single bridge or as a bridge per VLAN (the default). In multiple bridge mode the swit… |
| 1.3.6.1.4.1.43.10.34.2 | NodeswitchConfigGroup | |||
| 1.3.6.1.4.1.43.10.34.2.1 | TableprConfigPortTable | not-accessible | mandatory | Table providing configuration information about a port on a Switch unit. |
| 1.3.6.1.4.1.43.10.34.2.1.1 | RowprConfigPortEntry | not-accessible | mandatory | Configuration options for a single port. |
| 1.3.6.1.4.1.43.10.34.2.1.1.1 | ColumnprConPortVLANConfigMode | read-write | mandatory | This object specifies the VLAN mode to be used. Setting it to portMode(3) requires the user to configure the port's VLAN membership explicitly, whereas autoSel… |
| 1.3.6.1.4.1.43.10.34.2.1.1.2 | ColumnprConPortIFM | read-write | mandatory | This object controls Intelligent Flow Management for the port, which specifies what action the port takes whenever it is unable to receive a packet because its… |
| 1.3.6.1.4.1.43.10.34.2.1.1.3 | ColumnprConPortDiscardOnTx | read-write | mandatory | This object controls whether the 'Discard-on-transmit' feature is enabled for frames originating at this port. If set to on(3), the unit will discard frames de… |
| 1.3.6.1.4.1.43.10.34.2.1.1.4 | ColumnprConPortPaceMode | read-write | mandatory | This object specifies the type of backoff algorithm used on the port. A port can use the standard ethernet algorithm or, for PACE applications, it can be set t… |
| 1.3.6.1.4.1.43.10.34.2.1.1.5 | ColumnprConPortStpFastStart | read-write | mandatory | This object specifies whether a switch port will go to the forwarding state immediately if spanning tree is turned on. When this object is set to on(2), the no… |
| 1.3.6.1.4.1.43.10.34.2.1.1.6 | ColumnprConPortFlowCntlStatus | read-only | mandatory | This object represents the operational full duplex flow control state of the port, as determined by either (1) the result of auto-negotiation, or (2) if auto-n… |
| 1.3.6.1.4.1.43.10.34.2.1.1.7 | ColumnprConPortFlowCntlDefaultStatus | read-write | mandatory | This object represents the administratively-configured full duplex flow control status of the port. If auto-negotiation is not enabled for this port, the value… |