A3COM0073IGMP-SNOOP
18 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises IpAddress |
| RFC1213-MIB | ifIndex |
| SNMPv2-TC | -- TruthValue -- |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43 | Nodea3Com | |||
| 1.3.6.1.4.1.43.10 | Nodegeneric | |||
| 1.3.6.1.4.1.43.10.37 | NodeigmpMib | |||
| 1.3.6.1.4.1.43.10.37.1 | NodeigmpSnoop | |||
| 1.3.6.1.4.1.43.10.37.1.1 | ScalarigmpSnoopEnabled | read-write | mandatory | Enables/disables IGMP Snooping on this device. It is set stack-wide. The defaule value is True. The range is True(1) or False(2). |
| 1.3.6.1.4.1.43.10.37.1.2 | ScalarigmpSnoopRobustness | read-write | mandatory | This enables IGMP tuning on a lossy network if a switch is the querier. On such a network it may be increased. It is set stack-wide. The default value is 1. Th… |
| 1.3.6.1.4.1.43.10.37.1.3 | ScalarigmpSnoopLeaveEnabled | read-write | mandatory | Enables/disables the processing of IGMP v2 leave messages stack-wide. The default value is True(1). The range is True(1) or False(2). |
| 1.3.6.1.4.1.43.10.37.1.4 | ScalarigmpSnoopQueryTimeout | read-write | mandatory | The frequency at which IGMP general query packets are transmitted on this VLAN by the querying switch in seconds. So this is the time between general periodic … |
| 1.3.6.1.4.1.43.10.37.1.5 | ScalarigmpSnoopQueryMaxResponseTime | read-write | mandatory | The maximum query response time in seconds advertised in IGMP v2 queries on this VLAN if the switch is the querier. Smaller values allow a switch to prune grou… |
| 1.3.6.1.4.1.43.10.37.1.6 | ScalarigmpSnoopLastMemberQueryTimeout | read-write | mandatory | A timeout interval in seconds. Maximum response time inserted into the IGMP group specific queries sent in response to an IGMP Leave by a querying switch. It i… |
| 1.3.6.1.4.1.43.10.37.1.7 | ScalarigmpSnoopLastMemberQueryCount | read-write | mandatory | The number of group specific queries sent before the querying switch decides that there are no more hosts listening to a particular group multicast address. It… |
| 1.3.6.1.4.1.43.10.37.1.8 | ScalarigmpSnoopRouterPortRefreshTimeout | read-write | mandatory | A timeout interval in seconds. The maximum time that should elapse between multicast router protocol PDUs on a port in the VLAN. The default is 100 seconds and… |
| 1.3.6.1.4.1.43.10.37.1.9 | TableigmpSnoopVLANTable | not-accessible | mandatory | The (conceptual) table listing the VLANs on which IGMP Snooping is enabled. |
| 1.3.6.1.4.1.43.10.37.1.9.1 | RowigmpSnoopVLANEntry | not-accessible | mandatory | An entry (conceptual row) representing a VLAN on which IGMP Snooping is enabled. |
| 1.3.6.1.4.1.43.10.37.1.9.1.1 | ColumnigmpSnoopVLANJoins | read-only | mandatory | The number of times a group membership has been added on this VLAN; i.e. the number of times an entry for this VLAN has been added to the IGMP Snooping VLAN Ta… |
| 1.3.6.1.4.1.43.10.37.1.9.1.2 | ColumnigmpSnoopVLANLeaves | read-only | mandatory | The number of times a group membership has been removed from this VLAN; i.e. the number of times an entry for this VLAN has been deleted from the IGMP Snooping… |
| 1.3.6.1.4.1.43.10.37.1.10 | ScalarigmpQueryEnabled | read-write | mandatory | Enabled/Disables IGMP Queries for this device. The default value is True. The range is True(1) or False(2). |
| 1.3.6.1.4.1.43.10.37.1.11 | ScalarigmpQueryIpAddress | read-write | mandatory | This is the IP address used in IGMP Queries. The default value is the management IP address. Since the root query device is determined by the lowest IP address… |