A3COM0304-RESILIENTLINKS
29 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43 | Nodea3Com | |||
| 1.3.6.1.4.1.43.10 | Nodegeneric | |||
| 1.3.6.1.4.1.43.10.15 | NodemrmResilience | |||
| 1.3.6.1.4.1.43.10.15.1 | TableresTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.10.15.1.1 | RowresTableEntry | not-accessible | mandatory | An device may be configured to contain a number of 'resilient pairs'. These are to point connections, e.g. UTP, that allow two repeaters/switches to be connect… |
| 1.3.6.1.4.1.43.10.15.1.1.1 | ColumnresRepeater | read-only | mandatory | A resilient pair must be attached to one of the repeaters in the chassis. This is part of the index value required to access this table. |
| 1.3.6.1.4.1.43.10.15.1.1.2 | ColumnresMainSlot | read-only | mandatory | This is the second key in the index to this table. This is the slot number of the main port in this pair. |
| 1.3.6.1.4.1.43.10.15.1.1.3 | ColumnresMainPort | read-only | mandatory | This is the final, key used to index entries in this table. It is the port number of the main port in the pair. |
| 1.3.6.1.4.1.43.10.15.1.1.4 | ColumnresMainState | read-only | mandatory | Each port in a pair is constantly monitored for signs of failure. Failure information is used to automatically change the active port from main to standby or v… |
| 1.3.6.1.4.1.43.10.15.1.1.5 | ColumnresStandbySlot | read-write | mandatory | This is the slot number of the standby port for this pair. |
| 1.3.6.1.4.1.43.10.15.1.1.6 | ColumnresStandbyPort | read-write | mandatory | This is the port number of the standby port. |
| 1.3.6.1.4.1.43.10.15.1.1.7 | ColumnresStandbyState | read-only | mandatory | Each port in a pair is constantly monitored for signs of failure. Failure information is used to automatically change the active port from main to standby or v… |
| 1.3.6.1.4.1.43.10.15.1.1.8 | ColumnresPairState | read-only | mandatory | Each row in the table is in one of two states, invalid(1) or operational(2). If the state is invalid(1), the resilient pair represented by this row is not acti… |
| 1.3.6.1.4.1.43.10.15.1.1.9 | ColumnresPairModificationStatus | read-write | mandatory | This parameter must be set to under-modification(1) before any changes are made to an existing configuration. Changes are not applied until this parameter is s… |
| 1.3.6.1.4.1.43.10.15.1.1.10 | ColumnresPairAction | read-write | mandatory | This is object allows the state of a resilient pair to be modified. The create(1) operation configures the resilient port from this table entry. The delete(2) … |
| 1.3.6.1.4.1.43.10.15.1.1.11 | ColumnresPairEnable | read-write | mandatory | This parameter controls whether the resilient pair is enabled or not. In the disable(2) state , both ports of the resilient pair are disabled. The default valu… |
| 1.3.6.1.4.1.43.10.15.1.1.12 | ColumnresPairMode | read-write | mandatory | This parameter controls the rules that determine the operation of the resilient pair. The value no-switch-back(1) means that both ports are treated equally. Th… |
| 1.3.6.1.4.1.43.10.15.1.1.13 | ColumnresPairName | read-write | mandatory | The textual name of the interface. The value of this object should be the name of the interface as assigned by the local device and should be suitable for use … |
| 1.3.6.1.4.1.43.10.15.2 | TableresStandbyMapTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.43.10.15.2.1 | RowresStandbyMapTableEntry | not-accessible | mandatory | This table is read-only. If provides shortcut information to allow for the translation of a port number to a corresponding main port number. This value can the… |
| 1.3.6.1.4.1.43.10.15.2.1.1 | ColumnresSbRepeater | read-only | mandatory | The repeater index of the port being accessed. This is the first of three indices on this table. |
| 1.3.6.1.4.1.43.10.15.2.1.2 | ColumnresSbSlot | read-only | mandatory | Second index on this table. |
| 1.3.6.1.4.1.43.10.15.2.1.3 | ColumnresSbPort | read-only | mandatory | Third index on this table. |
| 1.3.6.1.4.1.43.10.15.2.1.4 | ColumnresSbType | read-only | mandatory | This attribute specifies whether the port indexed is a main or standby port in the resilient pair table. If the port is neither then there will not be a row in… |
| 1.3.6.1.4.1.43.10.15.2.1.5 | ColumnresSbMainSlot | read-only | mandatory | This is the slot number of the main port for the pair in which the indexed port participates. NOTE if the index port is the main port of a pair (resSbType is '… |
| 1.3.6.1.4.1.43.10.15.2.1.6 | ColumnresSbMainPort | read-only | mandatory | This is the port number of the main port for the pair in which the indexed port participates. NOTE if the index port is the main port of a pair (resSbType is '… |
| 1.3.6.1.4.1.43.10.15.3 | ScalarresFlushTable | read-write | mandatory | This parameter causes all entries in the resilience table to be flushed. Flushing the resilience table does not affect the state of any of the resilient links … |
| 1.3.6.1.4.1.43.43 | NoderesResilienceSwitch | This trap is generated when a change of state of one of the ports in a resilient pair results in a switch of active port, or when there was no active port and … | ||
| 1.3.6.1.4.1.43.44 | NoderesStateChange | This trap is generated when a change of state of one of the ports in a resilient pair does not result in a switch of active port. If such a switch were to occu… |