A3COM0469-BACKUP-AND-RESTORE
12 objects
No module-level DESCRIPTION found.
Imported Objects
| A3COM0004-GENERIC | a3ComBackup-mib |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress mgmt NetworkAddress TimeTicks |
| RFC1213-MIB | DisplayString PhysAddress snmp |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43.10.43.1 | Scalara3ComBackupNecessary | read-only | mandatory | This object is used to warn the user that any previous backup that they have taken may no longer be used to restore the configuration to this device. It is the… |
| 1.3.6.1.4.1.43.10.43.2 | Scalara3ComBackupTftpServer | read-write | mandatory | This object is used to store the IP address of the TFTP Server which is being used to hold the backup and snapshot files. Before a user has programmed an addre… |
| 1.3.6.1.4.1.43.10.43.3 | Scalara3ComBackupFilename | read-write | mandatory | The name of the backup or snapshot file on the TFTP Server. This may include directory information as appropriate to the TFTP Server being used. This value sha… |
| 1.3.6.1.4.1.43.10.43.4 | Scalara3ComBackupAgentComment | read-only | mandatory | This object contains the header comment that the agent prepends to the backup and snapshot files. By default, it will contain a zero length string. It shall al… |
| 1.3.6.1.4.1.43.10.43.5 | Scalara3ComBackupUserComment | read-write | mandatory | This object is similar to the agent comment object above but it allows the user to add their own notes to the backup or snapshot file. This object shall defaul… |
| 1.3.6.1.4.1.43.10.43.6 | Scalara3ComBackupAction | read-write | mandatory | This object actually starts the operation. The user's parameters MUST have been entered into the preceeding objects before a command is started. The objects SH… |
| 1.3.6.1.4.1.43.10.43.7 | Scalara3ComBackupStatus | read-only | mandatory | This returns the status of the current or the previous operation. See the top of this MIB for a list of all of the possible values that this object may take. |
| 1.3.6.1.4.1.43.10.43.8 | Scalara3ComBackupBytes | read-only | mandatory | The number of bytes of the configuration data that have been transferred between the device and the TFTP Server. This may be used by the user interface to prov… |
| 1.3.6.1.4.1.43.10.43.9 | Scalara3ComBackupFailedCommand | read-only | mandatory | If any restore command fails, then this object shall contain the command line that caused the failure. It shall be cleared when the next restore operation comm… |
| 1.3.6.1.4.1.43.10.43.10 | Scalara3ComBackupFailureReason | read-only | mandatory | If a3ComBackupFailedCommand contains a failed command, then this object contains the error message that the failed command produced. Where the failures are bei… |
| 1.3.6.1.4.1.43.10.43.11 | Scalara3ComBackupResetNecessary | read-only | mandatory | This object is used to inform management stations such as 3NS that the device must be reset to factory defaults before a backup file may be restored. It shall … |
| 1.3.6.1.4.1.43.10.43.12 | Scalara3ComBackupLastAction | read-only | mandatory | This object returns the last operation that was performed by the user. This is used for display purposes so that a suitable message may be displayed to the use… |