A3Com-MLN-r1-MIB
50 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | enterprises |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.43 | Nodea3Com | |||
| 1.3.6.1.4.1.43.2 | NodebrouterMIB | |||
| 1.3.6.1.4.1.43.2.23 | Nodea3ComMLN | |||
| 1.3.6.1.4.1.43.2.23.1 | Scalara3mlnMaxPorts | read-only | mandatory | The maximum number of virtual and physical ports supported by the agent. This value should be used to verify correct port values. |
| 1.3.6.1.4.1.43.2.23.2 | Scalara3mlnMaxPhyPorts | read-only | mandatory | The maximum number of physical ports supported by the agent. This value should be used to verify correct port values. |
| 1.3.6.1.4.1.43.2.23.3 | Scalara3mlnCCSsaveErr | read-only | mandatory | The count of detected CCS Parameter saves that failed during the previous set operation. A value other than zero indicates that the running and stored configur… |
| 1.3.6.1.4.1.43.2.23.4 | Scalara3mlnCCSdelErr | read-only | mandatory | The count of detected CCS Parameter deletes that failed during the previous set operation. A value other than zero indicates that the running and stored config… |
| 1.3.6.1.4.1.43.2.23.5 | Scalara3mlnSetStatus | read-only | mandatory | The application's result of the last SET operation. This object is used to determine if the a3mlnLastSetMsg object is valid, and is NOT for general SNMP errors… |
| 1.3.6.1.4.1.43.2.23.6 | Scalara3mlnSetMsg | read-only | mandatory | The equalivent UI message for the previous SET operation. Valid only if a3mlnLastSetStatus is set to a value other than `setNoErr'. |
| 1.3.6.1.4.1.43.2.23.7 | Tablea3mlnPortTable | not-accessible | mandatory | A table of all physical and virtual ports which may be configured with the Logical Networks service. |
| 1.3.6.1.4.1.43.2.23.7.1 | Rowa3mlnPortEntry | not-accessible | mandatory | Each entry in this table represents a physical or virtual port. |
| 1.3.6.1.4.1.43.2.23.7.1.1 | Columna3mlnPindex | read-only | mandatory | This object specifies a port entry in the table and is specified as a value within the total port range (a3mlnMaxPorts). |
| 1.3.6.1.4.1.43.2.23.7.1.2 | Columna3mlnPtype | read-only | mandatory | The port's type. A value of `ppmPort' indicates that the port has not been configured in any Logical Network. |
| 1.3.6.1.4.1.43.2.23.7.1.3 | Columna3mlnPowner | read-only | mandatory | The port's owner (media type). If this is a Group Port, all Member ports must have the same owner. A value of `otherMedia' would imply a non-supported owner (m… |
| 1.3.6.1.4.1.43.2.23.7.1.4 | Columna3mlnPlink | read-only | mandatory | For a Group Port, this is either the value of the first member port or, if there are no member ports, the value negative two. For a Member port, this is the va… |
| 1.3.6.1.4.1.43.2.23.7.1.5 | Columna3mlnPstState | read-only | mandatory | The Spanning Tree state of this port. For a Group Port, this is the aggregate of all Member port states. If all Member ports are blocking, the Group Port is bl… |
| 1.3.6.1.4.1.43.2.23.7.1.6 | Columna3mlnPtbState | read-only | mandatory | Only valid for Member ports. This is the Transparent Bridge CONTrol value setting of the learn parameter. If the port has not been configured as a Logical Netw… |
| 1.3.6.1.4.1.43.2.23.7.1.7 | Columna3mlnPgrpPrimaryPort | read-only | mandatory | Only valid for Group Ports. This is the value of the physical port assigned as the group's primary port. This value is assigned by the agent and may change ove… |
| 1.3.6.1.4.1.43.2.23.7.1.8 | Columna3mlnPgrpSrcAdrPort | read-only | mandatory | Only valid for Group Ports. This is the physical port used to assign the group's source MAC address used for all packets transmitted by the group. This value i… |
| 1.3.6.1.4.1.43.2.23.7.1.9 | Columna3mlnPgrpSrcAdrMedia | read-only | mandatory | Only valid for Group Ports. This is the media type of the physical port being used for the group's source address. This value is assigned by the agent. |
| 1.3.6.1.4.1.43.2.23.7.1.10 | Columna3mlnPgrpSrcAdrValue | read-only | mandatory | Only valid for Group Ports. This is the physical MAC address of the group's source port. In the future, a profile VARIATION should be used to further specify m… |
| 1.3.6.1.4.1.43.2.23.7.1.11 | Columna3mlnPgrpDescription | read-only | mandatory | Only valid for Group Ports. This is the description (name) string for this Logical Network. |
| 1.3.6.1.4.1.43.2.23.8 | Tablea3mlnGroupTable | not-accessible | mandatory | A table of all configured Logical Network Group Ports. |
| 1.3.6.1.4.1.43.2.23.8.1 | Rowa3mlnGroupEntry | not-accessible | mandatory | Each entry in this table represents a Logical Network's Group Port. |
| 1.3.6.1.4.1.43.2.23.8.1.1 | Columna3mlnGrpPort | read-only | mandatory | This object specifies an entry in the table, and is a Group Port. Group Ports are virtual ports used as points of attachment to Logical Networks by upper layer… |
| 1.3.6.1.4.1.43.2.23.8.1.2 | Columna3mlnGrpPortType | read-only | mandatory | This port's type. The only valid value for a Group Port is `groupPort'. |
| 1.3.6.1.4.1.43.2.23.8.1.3 | Columna3mlnGrpPortState | read-only | mandatory | The PPM state of this Group Port. |
| 1.3.6.1.4.1.43.2.23.8.1.4 | Columna3mlnGrpPrimaryPort | read-only | mandatory | This is the value of the physical port assigned as the group's primary port. This value is assigned by the agent. |
| 1.3.6.1.4.1.43.2.23.8.1.5 | Columna3mlnGrpOwner | read-write | mandatory | The owner of this group (which is actually the media type for the group). All Member ports must have the same owner. |
| 1.3.6.1.4.1.43.2.23.8.1.6 | Columna3mlnGrpMemberCount | read-only | mandatory | The number of Member ports in this group. |
| 1.3.6.1.4.1.43.2.23.8.1.7 | Columna3mlnGrpFirstMember | read-only | mandatory | This is the value (index) of the first Member port of this group. A value of negative two indicates that no Member ports have been configured. |
| 1.3.6.1.4.1.43.2.23.8.1.8 | Columna3mlnGrpDescription | read-write | mandatory | The description (name) string for this logical network. |
| 1.3.6.1.4.1.43.2.23.8.1.9 | Columna3mlnGrpEntryStatus | read-write | mandatory | This object is used to add and delete entries in this table. See RowStatus description at the beginning of this MIB. Note - A group's description may be change… |
| 1.3.6.1.4.1.43.2.23.9 | Tablea3mlnMemberTable | not-accessible | mandatory | A table of configured Logical Networks. |
| 1.3.6.1.4.1.43.2.23.9.1 | Rowa3mlnMemberEntry | not-accessible | mandatory | Each entry in this table represents a Logical Network. |
| 1.3.6.1.4.1.43.2.23.9.1.1 | Columna3mlnMemGrpPort | read-only | mandatory | This object specifies a Logical Network within the table and is a Group Port within the virtual port range (greater than a3mlnMaxPhyPorts and less than a3mlnMa… |
| 1.3.6.1.4.1.43.2.23.9.1.2 | Columna3mlnMemPort | read-only | mandatory | This object specifies a Member port within a Logical Network and is a physical port within the physical port range (less than a3mlnMaxPhyPorts). |
| 1.3.6.1.4.1.43.2.23.9.1.3 | Columna3mlnMemOwner | read-write | mandatory | The owner of this group (which is actually the media type for the group). All Member ports must have the same owner. |
| 1.3.6.1.4.1.43.2.23.9.1.4 | Columna3mlnMemEntryStatus | read-write | mandatory | This object is used to add and delete entries in this table. See RowStatus description at the beginning of this MIB. |
| 1.3.6.1.4.1.43.2.23.10 | Nodea3mlnStatistics | |||
| 1.3.6.1.4.1.43.2.23.10.1 | Scalara3mlnStatSelGrpPort | read-only | mandatory | The number of times a Group Port has been selected. |
| 1.3.6.1.4.1.43.2.23.10.2 | Scalara3mlnStatSelMacAdr | read-only | mandatory | The number of times a MAC address has been selected. |
| 1.3.6.1.4.1.43.2.23.10.3 | Tablea3mlnPortStatTable | not-accessible | mandatory | A table of Logical Network Member port statistics. |
| 1.3.6.1.4.1.43.2.23.10.3.1 | Rowa3mlnPortStatEntry | not-accessible | mandatory | Each entry in this table represents statistics for a Member port of a Logical Network. |
| 1.3.6.1.4.1.43.2.23.10.3.1.1 | Columna3mlnPStatIndex | read-only | mandatory | This object specifies an entry in the port statistics table and is a Member port within the physical port range (less than a3mlnMaxPhyPorts). |
| 1.3.6.1.4.1.43.2.23.10.3.1.2 | Columna3mlnPStatRcvd | read-only | mandatory | Count of data frames received on this port. |
| 1.3.6.1.4.1.43.2.23.10.3.1.3 | Columna3mlnPStatXmit | read-only | mandatory | Count of data frames transmitted from this port. |
| 1.3.6.1.4.1.43.2.23.10.3.1.4 | Columna3mlnPStatStaMoveFrom | read-only | mandatory | Count of detected stations moving away from this port. |
| 1.3.6.1.4.1.43.2.23.10.3.1.5 | Columna3mlnPStatStaMoveTo | read-only | mandatory | Count of detected stations moving to this port. |
| 1.3.6.1.4.1.43.2.23.10.3.1.6 | Columna3mlnPStatSTAchange | read-only | mandatory | Count of Spanning Tree state changes for this port. |