AC-ANALOG-MIB
108 objects
No module-level DESCRIPTION found.
Imported Objects
| AUDIOCODES-TYPES-MIB | acBoardMibs acGeneric acProducts acRegistrations audioCodes |
| RFC1155-SMI | IpAddress |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString TAddress TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5003.9.10.8 | IdentityacAnalog | |||
| 1.3.6.1.4.1.5003.9.10.8.1 | NodeacAnalogConfiguration | |||
| 1.3.6.1.4.1.5003.9.10.8.1.1 | NodeacAnalogConfig | |||
| 1.3.6.1.4.1.5003.9.10.8.1.1.1 | NodeacAnalogMisc | |||
| 1.3.6.1.4.1.5003.9.10.8.1.1.1.1 | ScalaracAnalogMiscCurrentDisconnectDuration | read-write | current | Defines the current-disconnect duration (in msec). This value is used in generation and detection. Access: Offline. AC INI-Param: CurrentDisconnectDuration |
| 1.3.6.1.4.1.5003.9.10.8.1.1.1.2 | ScalaracAnalogMiscFlashHookPeriod | read-write | current | Defines the flashhook period (in msec) for both analog and IP sides. For the analog side it defines: - The maximal hook-flash detection period (for FXS gateway… |
| 1.3.6.1.4.1.5003.9.10.8.1.1.1.3 | ScalaracAnalogMiscGroundKeyDetection | read-write | current | Enables/disables the analog ground key detection. 0 = Disable 1= Enable. Access: Offline. AC INI-Param: GroundKeyDetection |
| 1.3.6.1.4.1.5003.9.10.8.1.1.2 | NodeacAuxiliaryFiles | |||
| 1.3.6.1.4.1.5003.9.10.8.1.1.2.1 | ScalaracAuxiliaryFilesFxsCoefficients | read-only | current | Defines the FXS loop coefficient filename. Max. 47 characters. AC INI-Param: FXSCOEFFILENAME |
| 1.3.6.1.4.1.5003.9.10.8.1.1.2.2 | ScalaracAuxiliaryFilesFxoCoefficients | read-only | current | Defines the FXO loop coefficient filename. Max. 47 characters. AC INI-Param: FXOCOEFFILENAME |
| 1.3.6.1.4.1.5003.9.10.8.1.2 | NodeacAnalogFxoConfig | |||
| 1.3.6.1.4.1.5003.9.10.8.1.2.1 | NodeacAnalogFxo | |||
| 1.3.6.1.4.1.5003.9.10.8.1.2.1.1 | ScalaracAnalogFxoFarEndDisconnectType | read-write | current | This parameter sets the source for the acEV_FAR_END_DISCONNECTED event (or for the relevant control protocol event). It is a bit field parameter, hence (for ex… |
| 1.3.6.1.4.1.5003.9.10.8.1.2.1.2 | ScalaracAnalogFxoCountryCoefficients | read-write | current | Allows the user to modify the line characteristic (AC and DC) according to country. Access: Offline. AC INI-Param: CountryCoefficients |
| 1.3.6.1.4.1.5003.9.10.8.1.2.1.3 | ScalaracAnalogFxoDCRemover | read-write | current | Determines whether to enable the analog DC remover in the DAA. One of the following values: 0 = DC remover is disabled 1 = DC remover is enabled. Access: Offli… |
| 1.3.6.1.4.1.5003.9.10.8.1.2.1.4 | ScalaracAnalogFxoDefaultLinePolarityState | read-write | current | Sets the TTX pulses voltage level. 0 = 0Vrms sinusoidal bursts 1 = 0.5Vrms sinusoidal bursts 2 = 1Vrms sinusoidal bursts. Access: Offline. AC INI-Param: SetDef… |
| 1.3.6.1.4.1.5003.9.10.8.1.2.1.5 | ScalaracAnalogFxoTxGainControl | read-write | current | Sets gain\attenuation of the FXO Tx path between -15db and 12db. default no gain. Access: Offline. AC INI-Param: FXOTxGainControl |
| 1.3.6.1.4.1.5003.9.10.8.1.2.1.6 | ScalaracAnalogFxoRxGainControl | read-write | current | Sets gain\attenuation of the FXO Rx path between -15db and 12db. default no gain. Access: Offline. AC INI-Param: FXORxGainControl |
| 1.3.6.1.4.1.5003.9.10.8.1.2.1.21 | TableacAnalogFxoFarEndDisconnectToneTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.8.1.2.1.21.1 | RowacAnalogFxoFarEndDisconnectToneEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.8.1.2.1.21.1.1 | ColumnacAnalogFxoFarEndDisconnectToneRowStatus | read-write | current | Far End Disconnect table row-status. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.1.2.1.21.1.2 | ColumnacAnalogFxoFarEndDisconnectToneAction | read-write | current | Far End Disconnect table action. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.1.2.1.21.1.3 | ColumnacAnalogFxoFarEndDisconnectToneActionResult | read-only | current | Far End Disconnect table result. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.1.2.1.21.1.4 | ColumnacAnalogFxoFarEndDisconnectToneIndex | read-only | current | Index for table use. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.1.2.1.21.1.5 | ColumnacAnalogFxoFarEndDisconnectToneType | read-write | current | Defines which CPT types are detected as far-end disconnect. The CPT type is based on the acTCallProgressToneType enum. This is valid when FarEndDisconnectType … |
| 1.3.6.1.4.1.5003.9.10.8.1.3 | NodeacAnalogFxsConfig | |||
| 1.3.6.1.4.1.5003.9.10.8.1.3.1 | NodeacAnalogFxs | |||
| 1.3.6.1.4.1.5003.9.10.8.1.3.1.1 | ScalaracAnalogFxsPolarityReversalType | read-write | current | Sets the type of the polarity reversal signal used for the network far-end answer and disconnect indications. Smooth reversal prevents negative effects as non-… |
| 1.3.6.1.4.1.5003.9.10.8.1.3.1.2 | ScalaracAnalogFxsMeteringType | read-write | current | Sets the metering method for charging pulses. 0 = 12 kHz sinusoidal bursts 1 = 16 kHz sinusoidal bursts 2 = Polarity Reversal pulses. Access: Offline. AC INI-P… |
| 1.3.6.1.4.1.5003.9.10.8.1.3.1.3 | ScalaracAnalogFxsLifeLineType | read-write | current | Defines the Lifeline phone type. The Lifeline phone is available (for FXS only) on port 4 in MP-104 and MP-108, on port 2 in MP-102, on ports 1-4 in the MP-118… |
| 1.3.6.1.4.1.5003.9.10.8.1.3.1.4 | ScalaracAnalogFxsMinFlashHookTime | read-write | current | Sets the minimal time (in msec) for detection of a flash-hook event (for FXS only). The valid range is 25 to 300. The default value is 300 msec. Detection is g… |
| 1.3.6.1.4.1.5003.9.10.8.1.3.1.5 | ScalaracAnalogFxsCallerIDTimingMode | read-write | current | Defines the Analog CallerID Timing Mode. 0 = CallerID transferred between first and second rings 1 = CallerID transferred on valid Off ring. Access: Offline. A… |
| 1.3.6.1.4.1.5003.9.10.8.1.3.1.6 | ScalaracAnalogFxsBellcoreCallerIDTypeOneSubStandard | read-write | current | Selects the sub-standard of the Bellcore Caller ID type. 0 = Between_Rings 1 = Not_Ring_Related 2 = Before_Ring_RP_AS. Access: Offline. AC INI-Param: BellcoreC… |
| 1.3.6.1.4.1.5003.9.10.8.1.3.1.7 | ScalaracAnalogFxsETSICallerIDTypeOneSubStandard | read-write | current | Selects the number denoting the ETSI CallerID Type 1 sub-standard. Either: 0 = ETSI_Between_Rings 1 = ETSI_Before_Ring_DT_AS 2 = ETSI_Before_Ring_RP_AS 3 = ETS… |
| 1.3.6.1.4.1.5003.9.10.8.1.3.1.8 | ScalaracAnalogFxsETSIVMWITypeOneStandard | read-write | current | Selects the number denoting the ETSI VMWI Type 1 Standard. Choose: 0 = ETSI_VMWI_Between_Rings 1 = ETSI_VMWI_Before_Ring_DT_AS 2 = ETSI_VMWI_Before_Ring_RP_AS … |
| 1.3.6.1.4.1.5003.9.10.8.1.3.1.9 | ScalaracAnalogFxsBellcoreVMWITypeOneStandard | read-write | current | Use this parameter to select the Bellcore VMWI standard. 0 - Between_Rings 1 - Not_Ring_Related. Access: Offline. AC INI-Param: BellcoreVMWITypeOneStandard |
| 1.3.6.1.4.1.5003.9.10.8.1.3.1.10 | ScalaracAnalogFxsDisableAutoCalibration | read-write | current | Determines whether to enable the analog Autocalibration in the DAA. One of the following values: 0 = Auto calibration is enabled 1 = Auto calibration is disabl… |
| 1.3.6.1.4.1.5003.9.10.8.1.3.1.11 | ScalaracAnalogFxsExternalLifeLinePorts | read-write | current | Set the amount of FXS ports which will be connected to an external life line and will be disabled (max value is half of the FXS ports). Access: Offline. AC INI… |
| 1.3.6.1.4.1.5003.9.10.8.1.3.1.12 | ScalaracAnalogFxsCountryCoefficients | read-write | current | Allows the user to modify the line characteristic (AC and DC) according to country. Access: Offline. AC INI-Param: FXSCountryCoefficients |
| 1.3.6.1.4.1.5003.9.10.8.1.3.1.13 | ScalaracAnalogFxsTTXVoltageLevel | read-write | current | Sets the TTX pulses voltage level. 0 = 0Vrms sinusoidal bursts 1 = 0.5Vrms sinusoidal bursts 2 = 1Vrms sinusoidal bursts -1 = notAvailable. Access: Offline. AC… |
| 1.3.6.1.4.1.5003.9.10.8.1.4 | NodeacAnalogEMConfig | |||
| 1.3.6.1.4.1.5003.9.10.8.1.4.1 | NodeacAnalogEM | |||
| 1.3.6.1.4.1.5003.9.10.8.1.4.1.1 | ScalaracAnalogEMVoiceType | read-write | current | E&M Voice Configuration Type 2 or 4 wire. Access: Offline. AC INI-Param: EnMVoiceType |
| 1.3.6.1.4.1.5003.9.10.8.1.4.1.2 | ScalaracAnalogEMInterfaceType | read-write | current | E&M Signaling Type - Trunking or Signaling. Access: Offline. AC INI-Param: EnMSystemType |
| 1.3.6.1.4.1.5003.9.10.8.1.4.1.3 | ScalaracAnalogEMSignalingType | read-write | current | Set E&M standatd signaling types are described in TIA/EIA-464C. Access: Offline. AC INI-Param: EnMSignalingType |
| 1.3.6.1.4.1.5003.9.10.8.1.4.1.4 | ScalaracAnalogEMPortRXGain | read-write | current | Rx Gain. Access: Offline. AC INI-Param: EnMPortRXGain |
| 1.3.6.1.4.1.5003.9.10.8.1.4.1.5 | ScalaracAnalogEMPortTXGain | read-write | current | Tx Gain. Access: Offline. AC INI-Param: EnMPortTXGain |
| 1.3.6.1.4.1.5003.9.10.8.1.4.1.6 | ScalaracAnalogEMCountryCoefficients | read-write | current | E&M Country Coefficients. Access: Offline. AC INI-Param: EnMCountryCoefficients |
| 1.3.6.1.4.1.5003.9.10.8.1.4.1.7 | ScalaracAnalogEMHookDebounceTiming | read-write | current | Sets the on E&M hook detection debounce timing. Access: Offline. AC INI-Param: EnMhookDebounceTiming |
| 1.3.6.1.4.1.5003.9.10.8.1.4.1.8 | ScalaracAnalogEMOffHookGlareEnable | read-write | current | Protect the EnM port from Rx and Tx hook collision. Access: Offline. AC INI-Param: EnMOffHookGlareEnable |
| 1.3.6.1.4.1.5003.9.10.8.2 | NodeacAnalogStatus | |||
| 1.3.6.1.4.1.5003.9.10.8.2.1 | NodeacAnalogStatusMisc | |||
| 1.3.6.1.4.1.5003.9.10.8.2.1.1 | ScalaracAnalogStatusMiscFxsOrFxo | read-only | current | Board is Fxs,Fxo, FXS_FXO or E&M. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.2.1.2 | ScalaracAnalogStatusMiscBoardTemperature | read-only | current | Temperature of the board in degrees Celsius, should not go higher then 60!. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.2.1.3 | ScalaracAnalogStatusMiscAnalogChannelsCount | read-only | current | Number of the Analog channels in the board. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.2.20 | NodeacAnalogFxsFxo | |||
| 1.3.6.1.4.1.5003.9.10.8.2.20.1 | TableacAnalogFxsFxoTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.8.2.20.1.1 | RowacAnalogFxsFxoEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.8.2.20.1.1.1 | ColumnacAnalogFxsFxoIndex | not-accessible | current | Index for table use. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.2.20.1.1.2 | ColumnacAnalogFxsFxoType | read-only | current | Line is Fxs, Fxo or E&M. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.2.20.1.1.3 | ColumnacAnalogFxsFxoChipRevNum | read-only | current | Fxs/Fxo's Chip revision number. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.2.20.1.1.4 | ColumnacAnalogFxsFxoHookState | read-only | current | The hook state of the analog line. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.2.21 | NodeacAnalogLegs | |||
| 1.3.6.1.4.1.5003.9.10.8.2.21.1 | TableacAnalogLegsTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.8.2.21.1.1 | RowacAnalogLegsEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.8.2.21.1.1.1 | ColumnacAnalogLegsLegIndex | not-accessible | current | Decribes The Digital EndPoint In A Call. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.2.21.1.1.2 | ColumnacAnalogLegsCallIndex | read-only | current | Decribes The Call which The Rtp EndPoint Participant In It. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.2.21.1.1.3 | ColumnacAnalogLegsAnalogType | read-only | current | Describs whether the board is FXS or FXO. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.2.21.1.1.4 | ColumnacAnalogLegsEchoCanceller | read-only | current | Enables or Disables the Echo Canceller. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.2.21.1.1.5 | ColumnacAnalogLegsHighPassFilter | read-only | current | Enables or Disables theHigh Pass Filter. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.2.21.1.1.6 | ColumnacAnalogLegsDTMFDetection | read-only | current | Enables or Disables the DTMF Detection. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.2.21.1.1.7 | ColumnacAnalogLegsVoiceVolume | read-only | current | Describs the volume of the voice in dB. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.2.21.1.1.8 | ColumnacAnalogLegsInputGain | read-only | current | Describes the Input Gain on the leg in dB. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.2.21.1.1.9 | ColumnacAnalogLegsLegName | read-only | current | Describes the Leg Name as in the Control Protocol. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.3 | NodeacAnalogAction | |||
| 1.3.6.1.4.1.5003.9.10.8.3.1 | NodeacAnalogFxoAction | |||
| 1.3.6.1.4.1.5003.9.10.8.3.1.1 | TableacAnalogFxoLineTestTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.8.3.1.1.1 | RowacAnalogFxoLineTestEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.8.3.1.1.1.1 | ColumnacAnalogFxoLineTestIndex | not-accessible | current | Index for table use. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.3.1.1.1.2 | ColumnacAnalogFxoLineTestActivate | read-write | current | Activate line testing in an FXO analog line according to a given line-index. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.3.1.1.1.3 | ColumnacAnalogFxoLineTestHookState | read-only | current | The hook state of the analog line. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.3.1.1.1.4 | ColumnacAnalogFxoLineTestPolarityStatus | read-only | current | The line's polarity state. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.3.1.1.1.5 | ColumnacAnalogFxoLineTestLineConnectionStatus | read-only | current | The connection's status of the line. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.3.1.1.1.6 | ColumnacAnalogFxoLineTestLineCurrent | read-only | current | The line's current [ma]. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.3.1.1.1.7 | ColumnacAnalogFxoLineTestLineVoltage | read-only | current | The line's voltage [V]. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.3.1.1.1.8 | ColumnacAnalogFxoLineTestRingState | read-only | current | The Ring's State. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.3.1.1.1.9 | ColumnacAnalogFxoLineTestLinePolarity | read-only | current | The line's polarity state. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.3.1.1.1.10 | ColumnacAnalogFxoLineTestMwiState | read-only | current | Mwi's state. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.3.1.1.1.11 | ColumnacAnalogFxoLineTestLastCurrentDisconnectDuration | read-only | current | Last current disconnect duration in msec. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.3.2 | NodeacAnalogFxsAction | |||
| 1.3.6.1.4.1.5003.9.10.8.3.2.1 | TableacAnalogFxsLineTestTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.8.3.2.1.1 | RowacAnalogFxsLineTestEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.8.3.2.1.1.1 | ColumnacAnalogFxsLineTestIndex | not-accessible | current | Index for table use. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.3.2.1.1.2 | ColumnacAnalogFxsLineTestActivate | read-write | current | Activate line testing in a FXS analog line according to a given line-index. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.3.2.1.1.3 | ColumnacAnalogFxsLineTestHookState | read-only | current | The hook state of the analog line. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.3.2.1.1.4 | ColumnacAnalogFxsLineTestRingState | read-only | current | Line's ring state. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.3.2.1.1.5 | ColumnacAnalogFxsLineTestPolarityStatus | read-only | current | Line's reversal-polarity. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.3.2.1.1.6 | ColumnacAnalogFxsLineTestMessageWaitingIndication | read-only | current | Line's messgae waiting indication state. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.3.2.1.1.7 | ColumnacAnalogFxsLineTestLineCurrentReading | read-only | obsolete | The Line current reading in 10ua units. This test is supported only in line no. 0. Not supported on MP500. In case of MP124 this test is supported in all ports… |
| 1.3.6.1.4.1.5003.9.10.8.3.2.1.1.8 | ColumnacAnalogFxsLineTestLineVoltageReading | read-only | obsolete | The Line voltage reading in 10mV units. In case of MP124 the Line voltage reading in 1V units. This test is supported only in line no. 0. Not supported on MP50… |
| 1.3.6.1.4.1.5003.9.10.8.3.2.1.1.9 | ColumnacAnalogFxsLineTestAnalogVoltageReading | read-only | obsolete | The current analog voltage reading in 10mV units. his test is supported only in line no. 0. Not supported on MP500. In case of MP124 this test is supported in … |
| 1.3.6.1.4.1.5003.9.10.8.3.2.1.1.10 | ColumnacAnalogFxsLineTestRingVoltageReading | read-only | obsolete | The current ring voltage reading in 10mV units. This test is supported only in line no. 0. Not supported on MP500. In case of MP124 this test is supported in a… |
| 1.3.6.1.4.1.5003.9.10.8.3.2.1.1.11 | ColumnacAnalogFxsLineTestLongLineCurrentReading | read-only | obsolete | The current long line reading in 10ua units. This test is supported only in line no. 0. Not supported on MP500. In case of MP124 this test is supported in all … |
| 1.3.6.1.4.1.5003.9.10.8.3.3 | NodeacAnalogCommonAction | |||
| 1.3.6.1.4.1.5003.9.10.8.3.3.1 | TableacAnalogCommonChannelTable | not-accessible | current | Table for common channels operations. |
| 1.3.6.1.4.1.5003.9.10.8.3.3.1.1 | RowacAnalogCommonChannelEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.8.3.3.1.1.1 | ColumnacAnalogCommonChannelIndex | not-accessible | current | Index for table use, the current channel. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.8.3.3.1.1.2 | ColumnacAnalogCommonChannelAction | read-write | current | An action to make on the current channel, The Reset action is for Analog channels only. AC INI-Param: N/A |