AC-CONTROL-MIB
272 objects
No module-level DESCRIPTION found.
Imported Objects
| AUDIOCODES-TYPES-MIB | acBoardMibs acGeneric acProducts acRegistrations audioCodes |
| RFC1155-SMI | IpAddress |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowPointer RowStatus TAddress TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5003.9.10.5 | IdentityacControl | |||
| 1.3.6.1.4.1.5003.9.10.5.1 | NodeacControlConfiguration | |||
| 1.3.6.1.4.1.5003.9.10.5.1.1 | NodeacControlCommonConfig | |||
| 1.3.6.1.4.1.5003.9.10.5.1.1.1 | NodeacCPLink | |||
| 1.3.6.1.4.1.5003.9.10.5.1.1.1.1 | NodeacCPKeepAlive | |||
| 1.3.6.1.4.1.5003.9.10.5.1.1.1.1.1 | ScalaracCPKeepAliveEnabled | read-write | current | Enables a proprietary keep-alive mechanism, in which a serviceChange is send with UNDEFINED as the termination ID and restart method. 0 = disable >0 = enable. … |
| 1.3.6.1.4.1.5003.9.10.5.1.1.1.1.2 | ScalaracCPKeepAliveInterval | read-write | current | This parameter is used to define the interval in seconds of a KeepAlive message. Access: Instant. AC INI-Param: KEEPALIVEINTERVAL |
| 1.3.6.1.4.1.5003.9.10.5.1.1.1.2 | NodeacCPTransport | |||
| 1.3.6.1.4.1.5003.9.10.5.1.1.1.2.1 | ScalaracCPTransportType | read-write | deprecated | Defines the transport type for the control protocol: 0 = UDP 1 = TCP 2 = SCTP. Access: Offline. AC INI-Param: CPTRANSPORTTYPE |
| 1.3.6.1.4.1.5003.9.10.5.1.1.1.2.2 | ScalaracCPTransportRetransmitionTimeOut | read-write | current | Controls protocols retransmission timeout. Sets the initial time (in msec) for the first retransmission. The retransmission intervals thereafter increase expon… |
| 1.3.6.1.4.1.5003.9.10.5.1.1.1.2.3 | ScalaracCPTransportControlDiffServ | read-write | current | Defines the value of the field 'DiffServ' in the IP header for control traffic. Range: 0 to 63. Access: Offline. AC INI-Param: CONTROLDIFFSERV |
| 1.3.6.1.4.1.5003.9.10.5.1.1.1.3 | NodeacCPTransaction | |||
| 1.3.6.1.4.1.5003.9.10.5.1.1.1.3.1 | ScalaracCPTransactionIDRange | read-write | current | Defines the range for the transaction ID. Default = 999997999. Access: Instant. AC INI-Param: TRANSACTIONIDRANGE |
| 1.3.6.1.4.1.5003.9.10.5.1.1.1.3.2 | ScalaracCPTransactionIDBase | read-write | current | Defines the minimum number for the transaction ID. Default = 2000. Access: Instant. AC INI-Param: TRANSACTIONIDBASE |
| 1.3.6.1.4.1.5003.9.10.5.1.1.1.3.3 | ScalaracCPTransactionRandomizeID | read-write | current | Defines if the transactions produced by the board start with a fixed or random number. 1 = Randomize On Refer also to the parameters defining Transaction Id Ra… |
| 1.3.6.1.4.1.5003.9.10.5.1.1.1.3.4 | ScalaracCPTransactionCommunicationLayerTimeout | read-write | current | Assumed delay of the communication layer. It is used in retransmission. This parameter defines the maximal time to wait for a response before declaring a disco… |
| 1.3.6.1.4.1.5003.9.10.5.1.1.2 | NodeacCPDigitCollect | |||
| 1.3.6.1.4.1.5003.9.10.5.1.1.2.1 | ScalaracCPDigitCollectUseEndOfDTMF | read-write | current | Defines if the detection of DTMF events is notified at the end of DTMF or at the start of DTMF. 0 = at start of DTMF 1 = at the end of DTMF. Access: Instant. A… |
| 1.3.6.1.4.1.5003.9.10.5.1.1.2.2 | ScalaracCPDigitCollectDTMFLength | read-write | current | Defines the time to play DTMF (in msec). Range: 0 to 65535. Access: Instant. AC INI-Param: DTMFDIGITLENGTH |
| 1.3.6.1.4.1.5003.9.10.5.1.1.2.3 | ScalaracCPDigitCollectDTMFInterInterval | read-write | current | Defines the time between DTMFs played (in msec). Range: 0 to 65535. Access: Instant. AC INI-Param: DTMFINTERDIGITINTERVAL |
| 1.3.6.1.4.1.5003.9.10.5.1.1.2.4 | ScalaracCPDigitCollectMapTimeOutTimer | read-write | current | Defines the timeout value (T symbol) in a digit map, in increments of 10. For MEGACO, it's the start timer. For the others, it's the end timer. When the value … |
| 1.3.6.1.4.1.5003.9.10.5.1.1.2.5 | ScalaracCPDigitCollectMapShortTimer | read-write | current | Defines the short timer (S Symbol) value in millisecond, in a digit map.This timer is typically activated when the repetition symbol '.' exists. When the value… |
| 1.3.6.1.4.1.5003.9.10.5.1.1.2.6 | ScalaracCPDigitCollectMapLongTimer | read-write | current | Defines the inter-digit long timer (L Symbol) value in millisecond, in a digit map.This timer is typically activated between collected digit when the end of th… |
| 1.3.6.1.4.1.5003.9.10.5.1.1.3 | NodeacCPDigitMap | |||
| 1.3.6.1.4.1.5003.9.10.5.1.1.3.1 | ScalaracCPDigitMapDefaultName | read-write | current | Name of the provisioned digit map. Range: String[30]. Access: Offline. AC INI-Param: DIGITMAPNAME |
| 1.3.6.1.4.1.5003.9.10.5.1.1.3.2 | ScalaracCPDigitMapPatterns | read-write | current | The digit map patterns separated by a vertical bar (|), as defined in the MEGACO RFC. Range = String[500]. Access: Offline. AC INI-Param: DIGITMAPPING |
| 1.3.6.1.4.1.5003.9.10.5.1.1.3.3 | ScalaracCPDigitMapDialedStringPrefix | read-write | current | Defines a prefix to add to the dialed string. Range = String[8]. Access: Instant. AC INI-Param: DialedStringPrefix |
| 1.3.6.1.4.1.5003.9.10.5.1.1.4 | NodeacCPNaming | |||
| 1.3.6.1.4.1.5003.9.10.5.1.1.4.1 | ScalaracCPNamingGateWay | read-write | current | Defines the media gateway's identification name. MGCP: Gateway's identification name towards the MGCP Call Agent. If undefined, the gateway name holds the IP a… |
| 1.3.6.1.4.1.5003.9.10.5.1.1.4.2 | ScalaracCPNamingEndPoint | read-write | deprecated | MGCP: Gateway's endpoint name. This is a prefix used to identify the endpoint, i.e., 'ACgw' in the following example: 'ACgw5@acl.com'. MEGACO: Prefix of the en… |
| 1.3.6.1.4.1.5003.9.10.5.1.1.4.3 | ScalaracCPNamingTrunk | read-write | deprecated | (MGCP) This parameter generates (together with the parameter defining the Endpoint Prefix) a local endpoint name on trunk-enabled media gateways. (MEGACO) Pref… |
| 1.3.6.1.4.1.5003.9.10.5.1.1.4.4 | ScalaracCPNamingEndpointPrefix | read-write | deprecated | (MGCP) This parameter generates (together with parameter Trunk Name) a local endpoint name on trunk-enabled media gateways. Range: String[19]. Access: Offline.… |
| 1.3.6.1.4.1.5003.9.10.5.1.1.4.5 | ScalaracCPNamingCallAgentDomain | read-write | current | Defines a domain name to be used to connect with the Call Agent. The parameter takes precedence over the Call Agent IP and the provisioned Call Agent parameter… |
| 1.3.6.1.4.1.5003.9.10.5.1.1.4.6 | ScalaracCPNamingCoderTblFileName | read-write | current | This parameter defines the name of an external coders table. In this table, the user can decide which coders will be used in the system. The original file is a… |
| 1.3.6.1.4.1.5003.9.10.5.1.1.4.7 | ScalaracCPNamingSessionOwner | read-write | current | Defines the owner/creator of the session Range = String[31]. Access: Instant. AC INI-Param: CPSDPSESSIONOWNER |
| 1.3.6.1.4.1.5003.9.10.5.1.1.5 | NodeacCPConference | |||
| 1.3.6.1.4.1.5003.9.10.5.1.1.5.1 | ScalaracCPConferenceMaxUsers | read-write | current | Defines the maximal number of users to reserve for a new conference. The actual conference size can be more than this, but never less. Range: 3 to 64. Access: … |
| 1.3.6.1.4.1.5003.9.10.5.1.1.5.2 | ScalaracCPConferenceMaxSimultaneousSpeakers | read-write | current | Defines the maximum number of users that can speak simultaneously in a conference. Range: 1 to 3. Access: Instant. AC INI-Param: CONFERENCEMAXSIMULTANEOUSSPEAK… |
| 1.3.6.1.4.1.5003.9.10.5.1.1.5.3 | ScalaracCPConferenceSignalGenerationEnable | read-write | current | Generates a beep when a participant enters or exits the conference. 0 = Do not generate 1 = Generate. Access: Instant. AC INI-Param: CONFERENCESIGNALGENERATION… |
| 1.3.6.1.4.1.5003.9.10.5.1.1.6 | NodeacCPMedia | |||
| 1.3.6.1.4.1.5003.9.10.5.1.1.6.1 | ScalaracCPMediaRTCPInterval | read-write | current | Defines the time interval between the adjacent RTCP reports (in msec). Range: 0 to 65535. Access: Instant. AC INI-Param: RTCPINTERVAL |
| 1.3.6.1.4.1.5003.9.10.5.1.1.6.2 | ScalaracCPMediaDefaultCoder | read-write | current | This parameter can be used to set a default coder for channel opening. For the legal coder names, refer to the product's User Manual. Default = cpDPT_G711Mulaw… |
| 1.3.6.1.4.1.5003.9.10.5.1.1.6.3 | ScalaracCPMediaPacketizationPeriod | read-write | current | Defines the default packetization period (Frame Size). Default = 20 msec (for G.723 30) Range: 5 to 80. Access: Instant. AC INI-Param: DEFAULTPACKETIZATIONPERI… |
| 1.3.6.1.4.1.5003.9.10.5.1.1.6.4 | ScalaracCPMediaRecordCoder | read-write | current | Determines the coder used for recording to a file. Access: Instant. AC INI-Param: cpRecordCoder |
| 1.3.6.1.4.1.5003.9.10.5.1.1.6.5 | ScalaracCPMediaPlayCoder | read-write | current | Determines the coder type to be used when playing a file of type .raw. Access: Instant. AC INI-Param: cpPlayCoder |
| 1.3.6.1.4.1.5003.9.10.5.1.1.6.6 | ScalaracCPMediaDefaultRealmName | read-write | current | By default, the default CP media realm is the first realm appearing in the CP media realm table. The parameter enables the user to set any of the realms appear… |
| 1.3.6.1.4.1.5003.9.10.5.1.1.6.7 | ScalaracCPMediaDspAllocationMethod | read-write | deprecated | determines dsp allocation method in IP to IP call. If this parameter is set to DISABLE_SINGLE_DSP_ALLOCATION (0) , then two IP terminations with the same confi… |
| 1.3.6.1.4.1.5003.9.10.5.1.1.6.21 | TableacCPMediaRealmTable | not-accessible | current | Control Protocol media realm configuration table. |
| 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1 | RowacCPMediaRealmEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.1 | ColumnacCPMediaRealmIndex | not-accessible | current | Index Field for line. Internal parameter. AC INI-Param: CpMediaRealm_Index |
| 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.2 | ColumnacCPMediaRealmRowStatus | read-create | current | ROWSTATUS field for line. Internal parameter. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.3 | ColumnacCPMediaRealmAction | read-create | current | Mangement Field for ACTIONS. Internal parameter. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.4 | ColumnacCPMediaRealmActionRes | read-only | current | Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.5 | ColumnacCPMediaRealmName | read-create | current | A string representing the name of the media realm. Access: Offline. AC INI-Param: CpMediaRealm_MediaRealmName |
| 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.6 | ColumnacCPMediaRealmIPv4If | read-create | current | Select the OID of the IPv4 interface name corresponding to the one appearing in the interface table. The OID should be 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.1… |
| 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.7 | ColumnacCPMediaRealmIPv6If | read-create | current | Select the OID of the IPv6interface name corresponding to the one appearing in the interface table. The OID should be 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.11… |
| 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.8 | ColumnacCPMediaRealmPortRangeStart | read-create | current | The starting port for the range of media ports. Access: Offline. AC INI-Param: CpMediaRealm_PortRangeStart |
| 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.9 | ColumnacCPMediaRealmMediaSessionLeg | read-create | current | The number of media sessions associated with the range of ports. Access: Offline. AC INI-Param: CpMediaRealm_MediaSessionLeg |
| 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.10 | ColumnacCPMediaRealmPortRangeEnd | read-only | current | The ending port for the range of media ports. AC INI-Param: CpMediaRealm_PortRangeEnd |
| 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.11 | ColumnacCPMediaRealmTransRateRatio | read-create | obsolete | In case of trans-rating the ptime will be multiplied. Access: Offline. AC INI-Param: CpMediaRealm_TransRateRatio |
| 1.3.6.1.4.1.5003.9.10.5.1.1.6.21.1.12 | ColumnacCPMediaRealmIsDefault | read-create | current | Determines whether this is the default media realm or not. Access: Offline. AC INI-Param: CpMediaRealm_IsDefault |
| 1.3.6.1.4.1.5003.9.10.5.1.1.7 | NodeacCPMisc | |||
| 1.3.6.1.4.1.5003.9.10.5.1.1.7.1 | ScalaracCPMiscDialToneDuration | read-write | current | Defines the timeout (in seconds) for the dial tone signal. Range: 1 to 65535. Access: Instant. AC INI-Param: DIALTONEDURATION |
| 1.3.6.1.4.1.5003.9.10.5.1.1.7.2 | ScalaracCPMiscTrunkIDOffset | read-write | current | Sets the offset to the trunk numbering. e.g., Offset = 2 causes the first trunk number to be 2. Note: This parameter was replaced by the parameter 'EP_NUM'. Ra… |
| 1.3.6.1.4.1.5003.9.10.5.1.1.7.3 | ScalaracCPMiscCompatibilityProfile | read-write | current | ControlS MGCP/MEGACO functioning for vendor-specific compatibility. Refer to the product's User's Manual. Range: Integer > 0 Refer to the product's User's Manu… |
| 1.3.6.1.4.1.5003.9.10.5.1.1.7.4 | ScalaracCPMiscSDPProfile | read-write | current | Controls MGCP/MEGACO functioning for SDP negotiation. The parameter is bitwise. Every new RFC support should be turned on or off with this parameter. Each bit … |
| 1.3.6.1.4.1.5003.9.10.5.1.1.8 | NodeacCPVxml | |||
| 1.3.6.1.4.1.5003.9.10.5.1.1.8.1 | ScalaracCPVxmlEnableVXML | read-write | current | Enables/disables the VXML stack. 0=Disable 1=Enable. Access: Offline. AC INI-Param: EnableVXML |
| 1.3.6.1.4.1.5003.9.10.5.1.1.9 | NodeacCPQualityOfExperience | |||
| 1.3.6.1.4.1.5003.9.10.5.1.1.9.1 | ScalaracCPQualityOfExperienceConnectionMode | read-write | obsolete | Defines whether the module will connect to the VQMS (client) or receive connection from the server (server). Access: Instant. AC INI-Param: QOEConnectionMode |
| 1.3.6.1.4.1.5003.9.10.5.1.1.9.2 | ScalaracCPQualityOfExperienceInformationLevel | read-write | obsolete | Defines the quantity of VQ information sent the the serverl. Access: Instant. AC INI-Param: QOEInformationLevel |
| 1.3.6.1.4.1.5003.9.10.5.1.1.9.3 | ScalaracCPQualityOfExperienceUseMosLQ | read-write | obsolete | If it is enabled the moss_lq will be used by the board to calculate the moss status instead of the moss_cq'. Access: Instant. AC INI-Param: QOEUseMosLQ |
| 1.3.6.1.4.1.5003.9.10.5.1.1.9.4 | ScalaracCPQualityOfExperienceSendBufferSize | read-write | current | Defines the sending buffer size of the socket. Access: Instant. AC INI-Param: QOESendBufferSize |
| 1.3.6.1.4.1.5003.9.10.5.1.1.9.5 | ScalaracCPQualityOfExperienceEnableTLS | read-write | current | Defines a domain name to be used to connect with the Call Agent. Access: Offline. AC INI-Param: QOEEnableTLS |
| 1.3.6.1.4.1.5003.9.10.5.1.1.9.6 | ScalaracCPQualityOfExperienceServerIp | read-write | current | in case VQM is at client configuration, this parameter defines the server ip. Access: Offline. AC INI-Param: QOEServerIp |
| 1.3.6.1.4.1.5003.9.10.5.1.1.9.7 | ScalaracCPQualityOfExperiencePort | read-write | current | Quality Of Experience Port. Access: Instant. AC INI-Param: QOEPort |
| 1.3.6.1.4.1.5003.9.10.5.1.1.9.8 | ScalaracCPQualityOfExperienceInterfaceName | read-write | current | the interface to wait on in case of server (default is the default control interface). Access: Offline. AC INI-Param: QOEInterfaceName |
| 1.3.6.1.4.1.5003.9.10.5.1.1.9.9 | ScalaracCPQualityOfExperienceMOSCalculationAlgorithm | read-write | current | Reporting of MOS-LQ (listening quality) or MOS-CQ (conversational quality). Access: Offline. AC INI-Param: QOEUseMosLQ |
| 1.3.6.1.4.1.5003.9.10.5.1.1.9.21 | TableacCPQOERulesTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.5.1.1.9.21.1 | RowacCPQOERulesEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.5.1.1.9.21.1.1 | ColumnacCPQOERulesMediaRealmIndex | not-accessible | current | The Media Realm Name index at acCPMediaRealmTable. AC INI-Param: QOERules_MediaRealmIndex |
| 1.3.6.1.4.1.5003.9.10.5.1.1.9.21.1.2 | ColumnacCPQOERulesRuleIndex | not-accessible | current | Rule Index. AC INI-Param: QOERules_RuleIndex |
| 1.3.6.1.4.1.5003.9.10.5.1.1.9.21.1.3 | ColumnacCPQOERulesRowStatus | read-create | current | ROWSTATUS Field for line. AC INI-Param: QOERules_RowStatus |
| 1.3.6.1.4.1.5003.9.10.5.1.1.9.21.1.4 | ColumnacCPQOERulesAction | read-create | current | Mangement Field for ACTIONS. AC INI-Param: QOERules_Action |
| 1.3.6.1.4.1.5003.9.10.5.1.1.9.21.1.5 | ColumnacCPQOERulesActionRes | read-only | current | Mangement Field for ACTIONS RESULT. AC INI-Param: QOERules_ActionRes |
| 1.3.6.1.4.1.5003.9.10.5.1.1.9.21.1.6 | ColumnacCPQOERulesMonitoredParam | read-create | current | MonitoredParam. Access: Online. AC INI-Param: QOERules_MonitoredParam |
| 1.3.6.1.4.1.5003.9.10.5.1.1.9.21.1.7 | ColumnacCPQOERulesGreenYellowThreshold | read-create | current | GreenYellowThreshold. Access: Online. AC INI-Param: QOERules_GreenYellowThreshold |
| 1.3.6.1.4.1.5003.9.10.5.1.1.9.21.1.8 | ColumnacCPQOERulesGreenYellowHystersis | read-create | current | GreenYellowHystersis. Access: Online. AC INI-Param: QOERules_GreenYellowHysteresis |
| 1.3.6.1.4.1.5003.9.10.5.1.1.9.21.1.9 | ColumnacCPQOERulesYellowRedThreshold | read-create | current | YellowRedThreshold. Access: Online. AC INI-Param: QOERules_YellowRedThreshold |
| 1.3.6.1.4.1.5003.9.10.5.1.1.9.21.1.10 | ColumnacCPQOERulesYellowRedHystersis | read-create | current | YellowRedHystersis. Access: Online. AC INI-Param: QOERules_YellowRedHysteresis |
| 1.3.6.1.4.1.5003.9.10.5.1.1.9.21.1.11 | ColumnacCPQOERulesProfile | read-create | current | Profile. Access: Online. AC INI-Param: QOERules_Profile |
| 1.3.6.1.4.1.5003.9.10.5.1.1.9.21.1.12 | ColumnacCPQOERulesGreenYellowOperation | read-create | current | The operation upon crossing green to yellow threshold. Access: Online. AC INI-Param: QOERules_GreenYellowOperation |
| 1.3.6.1.4.1.5003.9.10.5.1.1.9.21.1.13 | ColumnacCPQOERulesGreenYellowOperationDetails | read-create | current | The specific details for the operation (relevant to Activate2198 only). Access: Online. AC INI-Param: QOERules_GreenYellowOperationDetails |
| 1.3.6.1.4.1.5003.9.10.5.1.1.9.21.1.14 | ColumnacCPQOERulesYellowRedOperation | read-create | current | The operation upon crossing yellow to red threshold. Access: Online. AC INI-Param: QOERules_YellowRedOperation |
| 1.3.6.1.4.1.5003.9.10.5.1.1.9.21.1.15 | ColumnacCPQOERulesYellowRedOperationDetails | read-create | current | The specific details for the operation (relevant to Activate2198 only). Access: Online. AC INI-Param: QOERules_YellowRedOperationDetails |
| 1.3.6.1.4.1.5003.9.10.5.1.1.9.21.1.16 | ColumnacCPQOERulesDirection | read-create | current | Whether the paramter is monitored on the remote or local side. Access: Online. AC INI-Param: QOERules_Direction |
| 1.3.6.1.4.1.5003.9.10.5.1.1.10 | NodeacBandwidth | |||
| 1.3.6.1.4.1.5003.9.10.5.1.1.10.21 | TableacBandwidthManagementTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.5.1.1.10.21.1 | RowacBandwidthManagementEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.5.1.1.10.21.1.1 | ColumnacBandwidthManagementMediaRealmIndex | not-accessible | current | The Media Realm Name index at acCPMediaRealmTable. AC INI-Param: BWManagement_MediaRealmIndex |
| 1.3.6.1.4.1.5003.9.10.5.1.1.10.21.1.2 | ColumnacBandwidthManagementThresholdIndex | not-accessible | current | Rule Index. AC INI-Param: BWManagement_ThresholdIndex |
| 1.3.6.1.4.1.5003.9.10.5.1.1.10.21.1.3 | ColumnacBandwidthManagementRowStatus | read-create | current | ROWSTATUS Field for line. Access: Offline. AC INI-Param: BWManagement_RowStatus |
| 1.3.6.1.4.1.5003.9.10.5.1.1.10.21.1.4 | ColumnacBandwidthManagementAction | read-create | current | Mangement Field for ACTIONS. Access: Offline. AC INI-Param: BWManagement_Action |
| 1.3.6.1.4.1.5003.9.10.5.1.1.10.21.1.5 | ColumnacBandwidthManagementActionRes | read-only | current | Mangement Field for ACTIONS RESULT. AC INI-Param: BWManagement_ActionRes |
| 1.3.6.1.4.1.5003.9.10.5.1.1.10.21.1.6 | ColumnacBandwidthManagementRuleAction | read-create | current | Rule Action. Access: Offline. AC INI-Param: BWManagement_RuleAction |
| 1.3.6.1.4.1.5003.9.10.5.1.1.10.21.1.7 | ColumnacBandwidthManagementThreshold | read-create | current | Threshold. Access: Offline. AC INI-Param: BWManagement_Threshold |
| 1.3.6.1.4.1.5003.9.10.5.1.1.10.21.1.8 | ColumnacBandwidthManagementHysteresis | read-create | current | Hysteresis. Access: Offline. AC INI-Param: BWManagement_Hysteresis |
| 1.3.6.1.4.1.5003.9.10.5.1.2 | NodeacProvisionedCallAgent | |||
| 1.3.6.1.4.1.5003.9.10.5.1.2.1 | TableacProvisionedCallAgentTable | not-accessible | current | Magaco Call agents Table.;The table defines the IP and port of each call agent.;The Row Status in this table is currently degenerated. It is permanently set to… |
| 1.3.6.1.4.1.5003.9.10.5.1.2.1.1 | RowacProvisionedCallAgentEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.5.1.2.1.1.1 | ColumnacProvisionedCallAgentRowStatus | read-write | current | Provisioned call agent table row-status. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.1.2.1.1.2 | ColumnacProvisionedCallAgentAction | read-write | current | Provisioned call agent table action. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.1.2.1.1.3 | ColumnacProvisionedCallAgentActionResult | read-only | current | Provisioned call agent table result. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.1.2.1.1.4 | ColumnacProvisionedCallAgentIndex | read-only | current | Megaco Call Agent Id. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.1.2.1.1.5 | ColumnacProvisionedCallAgentIp | read-write | current | Use this parameter to define a list of up to 10 legal IP addresses separated by ',' or ';' for the ServiceChange command. The gateway starts connecting with th… |
| 1.3.6.1.4.1.5003.9.10.5.1.2.1.1.6 | ColumnacProvisionedCallAgentPort | read-write | current | Use this parameter to define a list of up to 10 Call Agent UDP ports separated by , or ; for each Call Agent defined by the parameter used to specify the Allow… |
| 1.3.6.1.4.1.5003.9.10.5.1.2.2 | TableacCallManagerGroupsTable | not-accessible | current | List the trunks in the group. Comma and range can be used |
| 1.3.6.1.4.1.5003.9.10.5.1.2.2.1 | RowacCallManagerGroupsEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.5.1.2.2.1.1 | ColumnacCallManagerGroupsIndex | read-only | current | Call Manager Groups index. AC INI-Param: CPCallManagerGroups_Index |
| 1.3.6.1.4.1.5003.9.10.5.1.2.2.1.2 | ColumnacCallManagerGroupsRowStatus | read-create | current | Call Manager Groups table row-status. AC INI-Param: CPCallManagerGroups_RowStatus |
| 1.3.6.1.4.1.5003.9.10.5.1.2.2.1.3 | ColumnacCallManagerGroupsAction | read-create | current | Call Manager Groups table action. AC INI-Param: CPCallManagerGroups_Action |
| 1.3.6.1.4.1.5003.9.10.5.1.2.2.1.4 | ColumnacCallManagerGroupsActionResult | read-only | current | Call Manager Groups table result. AC INI-Param: CPCallManagerGroups_ActionRes |
| 1.3.6.1.4.1.5003.9.10.5.1.2.2.1.5 | ColumnacCallManagerGroupsList | read-create | current | List the trunks in the group. Comma and range can be used. Access: Offline. AC INI-Param: CPCallManagerGroups_GroupMembersList |
| 1.3.6.1.4.1.5003.9.10.5.1.2.2.1.6 | ColumnacCallManagerGroupsMGCType | read-create | current | 0- IP4 CA, 1- DNS (MGCPCallAgentDomainName). Access: Offline. AC INI-Param: CPCallManagerGroups_MGCType |
| 1.3.6.1.4.1.5003.9.10.5.1.2.2.1.7 | ColumnacCallManagerGroupsPrimaryMGCIndx | read-create | current | Index of primary MGC in the call agents list. The value 0 means there is no IP. Access: Offline. AC INI-Param: CPCallManagerGroups_PrimaryMGCIndx |
| 1.3.6.1.4.1.5003.9.10.5.1.2.2.1.8 | ColumnacCallManagerGroupsSecondaryMGCIndx | read-create | current | Index of secondary MGC in the call agents list. If none - set to 10. Access: Offline. AC INI-Param: CPCallManagerGroups_SecondaryMGCIndx |
| 1.3.6.1.4.1.5003.9.10.5.1.3 | NodeacMGCPConfig | |||
| 1.3.6.1.4.1.5003.9.10.5.1.3.1 | NodeacMGCallAgent | |||
| 1.3.6.1.4.1.5003.9.10.5.1.3.1.1 | ScalaracMGCallAgentIP | read-write | current | The Call Agent IP address, in dotted notation, to be used for the initial Restart in Progress (RSIP) message. Set to 0.0.0.0 to avoid sending RSIP. This parame… |
| 1.3.6.1.4.1.5003.9.10.5.1.3.1.2 | ScalaracMGCallAgentPort | read-write | current | Defines the Call Agent port number. Defaults to the MGCP default port number of 2427. Range: 0 to 65534. Access: Offline. AC INI-Param: CALLAGENTPORT |
| 1.3.6.1.4.1.5003.9.10.5.1.3.1.3 | ScalaracMGCallAgentRedundantIP | read-write | current | Defines the redundant Call Agent IP address to be used for the initial Restart in Progress message (RSIP). Set to 0.0.0.0 to avoid sending RSIP. Range = IP add… |
| 1.3.6.1.4.1.5003.9.10.5.1.3.1.4 | ScalaracMGCallAgentRedundantPort | read-write | current | Defines the redundant Call Agent port number. Defaults to the MGCP default port number of 2427. Access: Offline. AC INI-Param: REDUNDANTAGENTPORT |
| 1.3.6.1.4.1.5003.9.10.5.1.3.1.5 | ScalaracMGCallAgentRedundantDomainName | read-write | current | Defines the redundant MGCP Call Agent domain name. Range = String[63] Default = ' ' (empty string). Access: Instant. AC INI-Param: REDUNDANTCALLAGENTDOMAINNAME |
| 1.3.6.1.4.1.5003.9.10.5.1.3.1.21 | TableacMGCallAgentRedundantIPTable | not-accessible | current | Defines the redundant Call Agent IP address to be used for the initial Restart in Progress message (RSIP).{@} Set to 0.0.0.0 to avoid sending RSIP.{@}Range = I… |
| 1.3.6.1.4.1.5003.9.10.5.1.3.1.21.1 | RowacMGCallAgentRedundantIPEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.5.1.3.1.21.1.1 | ColumnacMGCallAgentRedundantIPIndex | not-accessible | current | Call Agent number starting at 0. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.1.3.1.21.1.2 | ColumnacMGCallAgentRedundantIPAddress | read-write | current | Access: Offline. AC INI-Param: RedundantAgentIP |
| 1.3.6.1.4.1.5003.9.10.5.1.3.1.22 | TableacMGCallAgentRedundantPortTable | not-accessible | current | Defines the redundant Call Agent port number.{@}Defaults to the MGCP default port number of 2427. |
| 1.3.6.1.4.1.5003.9.10.5.1.3.1.22.1 | RowacMGCallAgentRedundantPortEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.5.1.3.1.22.1.1 | ColumnacMGCallAgentRedundantPortIndex | not-accessible | current | Call Agent number starting at 0. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.1.3.1.22.1.2 | ColumnacMGCallAgentRedundantPortNumber | read-write | current | Access: Offline. AC INI-Param: RedundantAgentPort |
| 1.3.6.1.4.1.5003.9.10.5.1.3.2 | NodeacMGCommunication | |||
| 1.3.6.1.4.1.5003.9.10.5.1.3.2.1 | ScalaracMGCommunicationConnectionIDBase | read-write | current | Defines the lowest number for the Connection ID values assigned by the media gateway. Access: Offline. AC INI-Param: CONNECTIONIDBASE |
| 1.3.6.1.4.1.5003.9.10.5.1.3.2.2 | ScalaracMGCommunicationConnectionIDRange | read-write | current | Defines the range for the Connection ID values assigned by the gateway. Default = 999999999. Access: Offline. AC INI-Param: CONNECTIONIDRANGE |
| 1.3.6.1.4.1.5003.9.10.5.1.3.2.3 | ScalaracMGCommunicationGateWayPort | read-write | current | Users can use this parameter to force the media gateway to listen to another UDP port instead of to the original 2427, as defined in RFC 2705. Range = 0 to 655… |
| 1.3.6.1.4.1.5003.9.10.5.1.3.3 | NodeacMGMisc | |||
| 1.3.6.1.4.1.5003.9.10.5.1.3.3.1 | ScalaracMGMiscDigitmapMismatchNotification | read-write | current | The MGCP standard defines that if a number does not match the digitmap definition, a notification is not sent. One of the following values: 1 = Send mismatch n… |
| 1.3.6.1.4.1.5003.9.10.5.1.3.3.2 | ScalaracMGMiscPiggyBackingEnable | read-write | current | This parameter configures the option to send piggy backed commands while RSIPS are sent. For example, if the event is triggered by the board and RSIP was not s… |
| 1.3.6.1.4.1.5003.9.10.5.1.3.3.3 | ScalaracMGMiscUseWildCardWithRSIP | read-write | current | When wildcard is used RSIPs turn in a single message on EndPoint Naming configuration and Single message for each trunk in Trunk Naming configuration. If Off a… |
| 1.3.6.1.4.1.5003.9.10.5.1.3.3.4 | ScalaracMGMiscSDPProfile | read-write | current | Controls MGCP functioning for SDP negotiation. The parameter is bitwise. Every new RFC support should be turned on or off with this parameter. Each bit functio… |
| 1.3.6.1.4.1.5003.9.10.5.1.3.3.5 | ScalaracMGMiscClearRequestBuffer | read-write | current | Determines when signals and events are cleared. 0 = only an empty R: clears the event list and only an empty S: clears and stops the current signals list. Sign… |
| 1.3.6.1.4.1.5003.9.10.5.1.3.4 | NodeacMGNamePattern | |||
| 1.3.6.1.4.1.5003.9.10.5.1.3.4.1 | ScalaracMGNamePatternEndpoint | read-write | current | Defines the endpoint naming pattern for a gateway. The �*� signs will be replaced with an actual endpoint number or with a wild-card sign. The string will … |
| 1.3.6.1.4.1.5003.9.10.5.1.3.4.2 | ScalaracMGNamePatternTrunk | read-write | current | Defines the trunk and B-channel naming pattern used by the gateway. The �*� signs will be replaced with a trunk or B-channel number or with a wild-card sig… |
| 1.3.6.1.4.1.5003.9.10.5.1.4 | NodeacMegacoConfig | |||
| 1.3.6.1.4.1.5003.9.10.5.1.4.1 | NodeacMCLink | |||
| 1.3.6.1.4.1.5003.9.10.5.1.4.1.1 | NodeacMCCommunication | |||
| 1.3.6.1.4.1.5003.9.10.5.1.4.1.1.1 | ScalaracMCCommunicationCheckLegalityOfMGC | read-write | current | This parameter specifies if MEGACO rejects commands from an MGC not in the provisioned list. 0 = Don't reject unknown MGCs 1 = Reject unknown MGC. Access: Inst… |
| 1.3.6.1.4.1.5003.9.10.5.1.4.1.1.2 | ScalaracMCCommunicationGateWayMID | read-write | deprecated | Defines the media gateway's MID towards the MEGACO Call Agent. If empty or illegal, the MID holds the IP address of the board. Range: String[64]. Access: Offli… |
| 1.3.6.1.4.1.5003.9.10.5.1.4.1.1.3 | ScalaracMCCommunicationServiceChangeProfile | read-write | deprecated | Specifies the Profile that will be displayed in the MEGACO serviceChange command. At this stage, the profile will not determine the features supported. Range =… |
| 1.3.6.1.4.1.5003.9.10.5.1.4.1.2 | NodeacMCCommunicationTimer | |||
| 1.3.6.1.4.1.5003.9.10.5.1.4.1.2.1 | ScalaracMCCommunicationTimerMGProvisionalResponse | read-write | current | Defines the provisional response timer for the media gateway (in msec). Range: 0 to 20000. Access: Instant. AC INI-Param: MGPROVISIONALRESPONSETIME |
| 1.3.6.1.4.1.5003.9.10.5.1.4.1.2.2 | ScalaracMCCommunicationTimerMGCProvisionalResponse | read-write | current | Defines the provisional response timer for the MGC (in msec). Range: 0 to 20000. Access: Instant. AC INI-Param: MGCPROVISIONALRESPONSETIME |
| 1.3.6.1.4.1.5003.9.10.5.1.4.1.2.3 | ScalaracMCCommunicationTimerMGExecutionTime | read-write | current | Defines the estimated execution time of the media gateway (in msec). Range: 0 to 2000. Access: Instant. AC INI-Param: MGEXECUTIONTIME |
| 1.3.6.1.4.1.5003.9.10.5.1.4.1.2.4 | ScalaracMCCommunicationTimerMGCExecutionTime | read-write | current | Defines the estimated execution time of the MGC (in msec). Range: 0 to 2000. Access: Instant. AC INI-Param: MGCEXECUTIONTIME |
| 1.3.6.1.4.1.5003.9.10.5.1.4.1.2.5 | ScalaracMCCommunicationTimerHangTermTimeout | read-write | current | Default timeout (in seconds) for sending Hanging Termination event, when a request for Hanging Termination is sent without parameters. Range - 0 -65535. Access… |
| 1.3.6.1.4.1.5003.9.10.5.1.4.1.2.6 | ScalaracMCCommunicationTimerRestartMaxWaitingDelay | read-write | current | Defines the Maximum Waiting Delay (in milliseconds) before restart service change when the Media Gateway is powered on. Access: Instant. AC INI-Param: RestartM… |
| 1.3.6.1.4.1.5003.9.10.5.1.4.1.2.7 | ScalaracMCCommunicationTimerTargetMgResponseTime | read-write | current | The response time is defined as the time from the arrival of a call set-up request until the response (in msec). Range = 100-1000 in resolutions of 50 (i.e. 10… |
| 1.3.6.1.4.1.5003.9.10.5.1.4.2 | NodeacMCNaming | |||
| 1.3.6.1.4.1.5003.9.10.5.1.4.2.1 | NodeacMCNamePattern | |||
| 1.3.6.1.4.1.5003.9.10.5.1.4.2.1.1 | ScalaracMCNamePatternPhys | read-write | current | Defines the name pattern of a physical termination. For Example: 'tgw/t*/c*'. The '*' sign stands for the actual numbers of the trunk and bchannel. Range: Stri… |
| 1.3.6.1.4.1.5003.9.10.5.1.4.2.1.2 | ScalaracMCNamePatternLogicalRTP | read-write | current | Defines the name pattern of an RTP termination. For example: 'gw/rtp/*'. The '*' sign stands for the actual number of the RTP termination. Range: String [30]. … |
| 1.3.6.1.4.1.5003.9.10.5.1.4.2.1.3 | ScalaracMCNamePatternLogicalATM | read-write | deprecated | Defines the name pattern of an ATM termination. Range: String [30]. Access: Offline. AC INI-Param: LOGICALATMTERMPATTERN |
| 1.3.6.1.4.1.5003.9.10.5.1.4.2.1.4 | ScalaracMCNamePatternConf | read-write | current | Defines the name pattern of a conference termination. Applicable to IPM-1610 and TP-6310 only. Range: String[32]. Access: Offline. AC INI-Param: CONFERENCETERM… |
| 1.3.6.1.4.1.5003.9.10.5.1.4.2.1.5 | ScalaracMCNamePatternBCTN | read-write | current | Defines the name pattern of a BCT termination. Applicable to IPM-1610 and TP-6310 only. Range: String[32]. Access: Offline. AC INI-Param: BCTTERMPATTERN |
| 1.3.6.1.4.1.5003.9.10.5.1.4.2.1.6 | ScalaracMCNamePatternAudio | read-write | current | Defines the name pattern of an audio termination. Applicable to IPM-1610 and TP-6310 only. Range: String[32]. Access: Offline. AC INI-Param: AUDIOTERMPATTERN |
| 1.3.6.1.4.1.5003.9.10.5.1.4.2.1.7 | ScalaracMCNamePatternTrunkTest | read-write | current | Defines the name pattern of a trunk test termination. Applicable to IPM-1610 and TP-6310 only. Range: String[32]. Access: Offline. AC INI-Param: TRUNKTESTTERMP… |
| 1.3.6.1.4.1.5003.9.10.5.1.4.2.2 | NodeacMCNameNumber | |||
| 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.1 | ScalaracMCNameNumberEphemeralIDOffset | read-write | current | Offset for the ephemeral termination IDs in the gateway. e.g., offset = 100 causes the first ephemeral termination ID to be 101. Note: This parameter was repla… |
| 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21 | TableacMCNameNumberPhysicalEndpointTable | not-accessible | current | Magaco physical endpoint's numbering Table.;The table defines per level (e.g. trunk and channel) the numbering starting point and range.;The Row Status in this… |
| 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1 | RowacMCNameNumberPhysicalEndpointEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.1 | ColumnacMCNameNumberPhysicalEndpointRowStatus | read-write | current | Physical endpoint table row-status. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.2 | ColumnacMCNameNumberPhysicalEndpointAction | read-write | current | Physical endpoint table action. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.3 | ColumnacMCNameNumberPhysicalEndpointActionResult | read-only | current | Physical endpoint table result. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.4 | ColumnacMCNameNumberPhysicalEndpointIndex | read-only | current | Index for table use. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.5 | ColumnacMCNameNumberPhysicalEndpointStart | read-write | current | Defines the starting number for each name level (level 0 is the left one when looking at the parameter defining Phys Term Name Pattern). Thus, to start trunk n… |
| 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.6 | ColumnacMCNameNumberPhysicalEndpointMin | read-write | deprecated | Defines the minimum number for each name level (level 0 is the left one, i.e., the trunk number). Access: Offline. AC INI-Param: EP_MIN |
| 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.21.1.7 | ColumnacMCNameNumberPhysicalEndpointMax | read-write | current | Defines the maximum number for each name level (level 0 is the left one, i.e., the trunk number). Access: Offline. AC INI-Param: EP_MAX |
| 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22 | TableacMCNameNumberStreamEndpointTable | not-accessible | current | Magaco stream endpoint's numbering Table.;The table defines per level the numbering starting point and range.;The Row Status in this table is currently degener… |
| 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1 | RowacMCNameNumberStreamEndpointEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1.1 | ColumnacMCNameNumberStreamEndpointRowStatus | read-write | current | Stream endpoint table row-status. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1.2 | ColumnacMCNameNumberStreamEndpointAction | read-write | current | Stream endpoint table action. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1.3 | ColumnacMCNameNumberStreamEndpointActionResult | read-only | current | Stream endpoint table result. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1.4 | ColumnacMCNameNumberStreamEndpointIndex | read-only | current | Index for table use. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1.5 | ColumnacMCNameNumberStreamEndpointRTPStart | read-write | current | Defines the starting number for each name's RTP termination level. Access: Instant. AC INI-Param: RTP_NUM |
| 1.3.6.1.4.1.5003.9.10.5.1.4.2.2.22.1.6 | ColumnacMCNameNumberStreamEndpointATMStart | read-write | deprecated | Defines the starting number for each ATM termination level name. Range: Any positive number. Access: Instant. AC INI-Param: ATM_NUM |
| 1.3.6.1.4.1.5003.9.10.5.1.4.3 | NodeacMCPoolSize | |||
| 1.3.6.1.4.1.5003.9.10.5.1.4.3.1 | ScalaracMCPoolSizeProvisionedConf | read-write | current | Provisioned conference size indicated by parameter X-PtEngr. Applicable to IPM-1610 and TP-6310 only. The value is dynamically limited according to the number … |
| 1.3.6.1.4.1.5003.9.10.5.1.4.3.2 | ScalaracMCPoolSizeProvisionedBCT | read-write | current | Provisioned BCT size indicated by parameter X-PtEngr. Applicable to IPM-1610 and TP-6310 only. Range: 1 to 65535. Access: Instant. AC INI-Param: MEGACOPROVISIO… |
| 1.3.6.1.4.1.5003.9.10.5.1.4.3.3 | ScalaracMCPoolSizeProvisionedAudio | read-write | current | Defines the provisioned audio size indicated by parameter X-PtEngr. Applicable to IPM-1610 and TP-6310 only. Range: 1 to 65535. Access: Instant. AC INI-Param: … |
| 1.3.6.1.4.1.5003.9.10.5.1.4.3.4 | ScalaracMCPoolSizeNumOfTestTrunkPorts | read-write | current | Defines the provisioned TT (trunk testing) size indicated by the parameter X-PtEngr. Applicable to IPM-1610 and TP-6310 only. Range: 1 to 65535. Access: Instan… |
| 1.3.6.1.4.1.5003.9.10.5.1.4.4 | NodeacMCProfile | |||
| 1.3.6.1.4.1.5003.9.10.5.1.4.4.1 | ScalaracMCProfileBinary | read-write | deprecated | Used to profile the binary ASN.1 encoding. Range: Integer >0 Refer to the product's User's Manual for possible values. Access: Instant. AC INI-Param: MEGACOASN… |
| 1.3.6.1.4.1.5003.9.10.5.1.4.4.2 | ScalaracMCProfileAASPackages | read-write | current | Selects the profile for the Advanced Audio Syntax specification. 0 = TD-51 standard 1 = H.248.9 standard 2 = MGCP Packet Cable 3 = SIP MSCML. Access: Offline. … |
| 1.3.6.1.4.1.5003.9.10.5.1.4.4.3 | ScalaracMCProfileTdmHairPinningMode | read-write | current | determinewhich Hair-pinning mode is to be used: mode 0 - will create TDM to TDM connection through IP software Loopback mode 1 - will create �pure� hair-pi… |
| 1.3.6.1.4.1.5003.9.10.5.1.4.5 | NodeacMCMisc | |||
| 1.3.6.1.4.1.5003.9.10.5.1.4.5.1 | ScalaracMCMiscEncodingMethod | read-write | current | Sets the MEGACO coding method. 0 = Text mode. Access: Offline. AC INI-Param: MEGACOENCODING |
| 1.3.6.1.4.1.5003.9.10.5.1.4.5.2 | ScalaracMCMiscContextIDOffset | read-write | current | Offset for the context ID generated by the gateway. e.g., offset = 100 causes the first context to be 101. Range = 0 to 20000. Access: Instant. AC INI-Param: M… |
| 1.3.6.1.4.1.5003.9.10.5.1.4.5.3 | ScalaracMCMiscDisconnectBehavior | read-write | current | Determines PBX behavior upon losing connectivity with H.248 Call agent or TPNCP. 1 = No Action - keep routing traffic 2 = Disable Trunks - stop routing trafic … |
| 1.3.6.1.4.1.5003.9.10.5.1.4.5.4 | ScalaracMCMiscMegacoVersion | read-write | deprecated | Determines the maximum Megaco Version number that is supported by the device. Access: Offline. AC INI-Param: MegacoVersion |
| 1.3.6.1.4.1.5003.9.10.5.1.4.5.5 | ScalaracMCMiscSDPProfile | read-write | current | Controls MEGACO functioning for SDP negotiation. The parameter is bitwise. Every new RFC support should be turned on or off with this parameter. Each bit funct… |
| 1.3.6.1.4.1.5003.9.10.5.1.4.6 | NodeacMCAMS | |||
| 1.3.6.1.4.1.5003.9.10.5.1.4.6.1 | ScalaracMCAMSNumOfConferencePorts | read-write | current | Number Of Conference ports.� How many ports on the TPM are allocated to the conferencing service. Access: Instant. AC INI-Param: MEGACOPROVISIONEDCONFSIZE |
| 1.3.6.1.4.1.5003.9.10.5.1.4.6.2 | ScalaracMCAMSNumOfTestTrunkPorts | read-write | current | Number Of Test Trunk ports.� How many ports on the TPM are allocated to the Test Trunk service. Access: Instant. AC INI-Param: MEGACOPROVISIONEDTRUNKTESTINGS… |
| 1.3.6.1.4.1.5003.9.10.5.1.4.6.3 | ScalaracMCAMSNumOfLawfulInterceptPorts | read-write | current | Number Of Test Trunk ports.� How many ports on the TPM are allocated to the Lawful Intercept service. Access: Instant. AC INI-Param: MEGACOPROVISIONEDBCTSIZE |
| 1.3.6.1.4.1.5003.9.10.5.1.4.6.4 | ScalaracMCAMSNumOfAnnouncementPorts | read-write | current | Number Of Test Trunk ports.� How many ports on the TPM are allocated to the Announcement service. Access: Instant. AC INI-Param: MEGACOPROVISIONEDAUDIOSIZE |
| 1.3.6.1.4.1.5003.9.10.5.1.4.7 | NodeacMCVGW | |||
| 1.3.6.1.4.1.5003.9.10.5.1.4.7.21 | TableacVGWConfigurationTable | not-accessible | current | Table provides the list of the gateway in the device and their configuration.{@}Virtual GW is represented as separate row in this table. |
| 1.3.6.1.4.1.5003.9.10.5.1.4.7.21.1 | RowacVGWConfigurationEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.5.1.4.7.21.1.1 | ColumnacVGWConfigurationIndex | not-accessible | current | Index Field for line. AC INI-Param: MegacoGtwConfigurationTable_Index |
| 1.3.6.1.4.1.5003.9.10.5.1.4.7.21.1.2 | ColumnacVGWConfigurationRowStatus | read-create | current | ROWSTATUS Field for line. AC INI-Param: MegacoGtwConfigutationTable_RowStatus |
| 1.3.6.1.4.1.5003.9.10.5.1.4.7.21.1.3 | ColumnacVGWConfigurationAction | read-create | current | Mangement Field for ACTIONS. AC INI-Param: MegacoGtwConfigutationTable_Action |
| 1.3.6.1.4.1.5003.9.10.5.1.4.7.21.1.4 | ColumnacVGWConfigurationActionRes | read-only | current | Mangement Field for ACTIONS RESULT. AC INI-Param: MegacoGtwConfigutationTable_ActionRes |
| 1.3.6.1.4.1.5003.9.10.5.1.4.7.21.1.5 | ColumnacVGWConfigurationVirtualGWName | read-write | current | The descriptive name of the Virtual GW. Access: Offline. AC INI-Param: MegacoGtwConfigurationTable_VirtualGWName |
| 1.3.6.1.4.1.5003.9.10.5.1.4.7.21.1.6 | ColumnacVGWConfigurationIPv4InterfaceName | read-write | current | Define the pointer (Interface Name) to network Interface Table for IP version 4 address interface name. Access: Offline. AC INI-Param: MegacoGtwConfigurationTa… |
| 1.3.6.1.4.1.5003.9.10.5.1.4.7.21.1.7 | ColumnacVGWConfigurationIPv6InterfaceName | read-write | current | Define the pointer (Interface name) to network Interface Table for IP version 6 address interface name. Access: Offline. AC INI-Param: MegacoGtwConfigurationTa… |
| 1.3.6.1.4.1.5003.9.10.5.1.4.7.21.1.8 | ColumnacVGWConfigurationLocalPort | read-write | current | Define the port to be used by the Media Gateway Controller to communicate with this Virtual GW. The value 0 mean select default port according to encoding meth… |
| 1.3.6.1.4.1.5003.9.10.5.1.4.7.21.1.9 | ColumnacVGWConfigurationAssociatedMembersList | read-write | current | Defines the list of the Trunks/Interfaces. coma and range can be used. Access: Offline. AC INI-Param: MegacoGtwConfigurationTable_AssociatedMembersList |
| 1.3.6.1.4.1.5003.9.10.5.1.4.7.21.1.10 | ColumnacVGWConfigurationServiceChangeProfile | read-write | current | Define the service change profile. Access: Offline. AC INI-Param: MegacoGtwConfigurationTable_ServiceChangeProfile |
| 1.3.6.1.4.1.5003.9.10.5.1.4.7.21.1.11 | ColumnacVGWConfigurationMegacoVersion | read-write | current | Megaco Version. Access: Offline. AC INI-Param: MegacoGtwConfigurationTable_MegacoVersion |
| 1.3.6.1.4.1.5003.9.10.5.1.4.7.21.1.12 | ColumnacVGWConfigurationMID | read-write | current | Define the Virtual GW Message Identifier. Access: Offline. AC INI-Param: MegacoGtwConfigurationTable_MID |
| 1.3.6.1.4.1.5003.9.10.5.1.4.7.21.1.13 | ColumnacVGWConfigurationMediaRealmName | read-write | current | Define the default media realm name (pointer to media realm table). Access: Offline. AC INI-Param: MegacoGtwConfigurationTable_MediaRealmName |
| 1.3.6.1.4.1.5003.9.10.5.1.4.7.21.1.14 | ColumnacVGWConfigurationLoadWeight | read-write | current | Define the weight of the VGW out of the total load. VGW with higher values process more messages. Access: Offline. AC INI-Param: MegacoGtwConfigurationTable_Lo… |
| 1.3.6.1.4.1.5003.9.10.5.1.4.7.22 | TableacVGWControllerLinkTable | not-accessible | current | Table provides the list of the gateway controllers in the network and their configuration.{@}Each row represents link between Virtual Media GW and Media GW Con… |
| 1.3.6.1.4.1.5003.9.10.5.1.4.7.22.1 | RowacVGWControllerLinkEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.5.1.4.7.22.1.1 | ColumnacVGWControllerLinkVGWIndex | not-accessible | current | The virtual GW index at MegacoGtwConfigutationTable. AC INI-Param: MegacoGtwControllerLinkTable_VirtualGWIndex |
| 1.3.6.1.4.1.5003.9.10.5.1.4.7.22.1.2 | ColumnacVGWControllerLinkActivityOrder | not-accessible | current | This parameter define the order of redundancy call agents (1 is the active CA). AC INI-Param: MegacoGtwControllerLinkTable_ActivityOrder |
| 1.3.6.1.4.1.5003.9.10.5.1.4.7.22.1.3 | ColumnacVGWControllerLinkRowStatus | read-create | current | ROWSTATUS Field for line. AC INI-Param: MegacoGtwControllerLinkTable_RowStatus |
| 1.3.6.1.4.1.5003.9.10.5.1.4.7.22.1.4 | ColumnacVGWControllerLinkAction | read-create | current | Mangement Field for ACTIONS. AC INI-Param: MegacoGtwControllerLinkTable_Action |
| 1.3.6.1.4.1.5003.9.10.5.1.4.7.22.1.5 | ColumnacVGWControllerLinkActionRes | read-only | current | Mangement Field for ACTIONS RESULT. AC INI-Param: MegacoGtwControllerLinkTable_ActionRes |
| 1.3.6.1.4.1.5003.9.10.5.1.4.7.22.1.6 | ColumnacVGWControllerLinkMGCAddressFormat | read-write | current | Define the Define the format of the MGC address (IPv4, IPv6, DNS). Access: Offline. AC INI-Param: MegacoGtwControllerLinkTable_MGCAddressFormat |
| 1.3.6.1.4.1.5003.9.10.5.1.4.7.22.1.7 | ColumnacVGWControllerLinkMGControllerAddress | read-write | current | The domain name or IP address of the MG Controller. If a domain name is provided, then a DNS server must be configured. Access: Offline. AC INI-Param: MegacoGt… |
| 1.3.6.1.4.1.5003.9.10.5.1.4.7.22.1.8 | ColumnacVGWControllerLinkMGControllerPort | read-write | current | The port number MG Controller is listening for. 0 mean select default port according to encoding method. Access: Offline. AC INI-Param: MegacoGtwControllerLink… |
| 1.3.6.1.4.1.5003.9.10.5.1.4.7.22.1.9 | ColumnacVGWControllerLinkTransportType | read-write | current | Define the signaling transport type to be used for communication with this MGC. Access: Offline. AC INI-Param: MegacoGtwControllerLinkTable_TransportType |
| 1.3.6.1.4.1.5003.9.10.5.1.5 | NodeacLocalSwitching | |||
| 1.3.6.1.4.1.5003.9.10.5.1.5.1 | TableacLocalSwitchingTable | not-accessible | current | Local Switching definitions for analog ports |
| 1.3.6.1.4.1.5003.9.10.5.1.5.1.1 | RowacLocalSwitchingEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.5.1.5.1.1.1 | ColumnacLocalSwitchingIndex | not-accessible | current | AC INI-Param: LocalSwitchingPorts_Index |
| 1.3.6.1.4.1.5003.9.10.5.1.5.1.1.2 | ColumnacLocalSwitchingRowStatus | read-create | current | AC INI-Param: LocalSwitchingPorts_RowStatus |
| 1.3.6.1.4.1.5003.9.10.5.1.5.1.1.3 | ColumnacLocalSwitchingPhoneNumber | read-create | current | Local Switching definitions for analog ports. Access: Offline. AC INI-Param: LocalSwitchingPorts_PhoneNumber |
| 1.3.6.1.4.1.5003.9.10.5.2 | NodeacControlStatus | |||
| 1.3.6.1.4.1.5003.9.10.5.2.1 | NodeacActiveCallAgent | |||
| 1.3.6.1.4.1.5003.9.10.5.2.1.1 | ScalaracActiveCallAgentIp | read-only | current | Megaco Active Call Agent. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.2.1.2 | ScalaracActiveCallAgentPort | read-only | current | Megaco Active Port. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.2.2 | NodeacCurrentCalls | |||
| 1.3.6.1.4.1.5003.9.10.5.2.2.1 | NodeacCallInfo | |||
| 1.3.6.1.4.1.5003.9.10.5.2.2.1.1 | TableacCallInfoTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.5.2.2.1.1.1 | RowacCallInfoEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.5.2.2.1.1.1.1 | ColumnacCallInfoCallIndex | not-accessible | current | The Index of a call. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.2.2.1.1.1.2 | ColumnacCallInfoCallId | read-only | current | Describes the Call ID in the control protocol.For mgcp, string, For megaco asci. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.2.2.1.1.1.3 | ColumnacCallInfoMediaType | read-only | current | The type of the media transforming. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.2.2.1.1.1.4 | ColumnacCallInfoControlProtocol | read-only | current | The name of the control protocol active now. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.2.2.1.1.1.5 | ColumnacCallInfoDuration | read-only | current | the duration of a call from the momet it started. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.2.2.2 | NodeacCallHierarchy | |||
| 1.3.6.1.4.1.5003.9.10.5.2.2.2.1 | TableacCallHierarchyTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.5.2.2.2.1.1 | RowacCallHierarchyEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.5.2.2.2.1.1.1 | ColumnacCallHierarchyCallIndex | not-accessible | current | The Index of a call. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.2.2.2.1.1.2 | ColumnacCallHierarchyLegType | not-accessible | current | Describes the Type of an end poit. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.2.2.2.1.1.3 | ColumnacCallHierarchyLegID | not-accessible | current | Describes the end point of a call by index. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.2.2.2.1.1.4 | ColumnacCallHierarchyRowPointer | read-only | current | A pointer to the right instance in the current Leg table. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.5.2.3 | NodeacMegacoStatus | |||
| 1.3.6.1.4.1.5003.9.10.5.2.3.1 | ScalaracMegacoStatusCurrentVersion | read-only | current | The Megaco version currently being used. AC INI-Param: N/A |