AC-MEDIA-MIB
293 objects
No module-level DESCRIPTION found.
Imported Objects
| AUDIOCODES-TYPES-MIB | acBoardMibs acGeneric acProducts acRegistrations audioCodes |
| RFC1155-SMI | IpAddress |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TAddress TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5003.9.10.4 | IdentityacMedia | |||
| 1.3.6.1.4.1.5003.9.10.4.1 | NodeacMediaConfiguration | |||
| 1.3.6.1.4.1.5003.9.10.4.1.1 | NodeacMediaDSPConfig | |||
| 1.3.6.1.4.1.5003.9.10.4.1.1.1 | ScalaracMediaDSPConfigVersionTemplateNumber | read-write | current | Selects the DSP load number. Each load has a different coder list, a different channel capacity and different features supported. Range = 0 to 255. Access: Off… |
| 1.3.6.1.4.1.5003.9.10.4.1.1.21 | TableacMediaDspTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.4.1.1.21.1 | RowacMediaDspEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.4.1.1.21.1.1 | ColumnacMediaDspIndex | not-accessible | current | Entry number in the table. AC INI-Param: DspTemplates_Index |
| 1.3.6.1.4.1.5003.9.10.4.1.1.21.1.2 | ColumnacMediaDspRowStatus | read-create | current | ROWSTATUS field for line. Internal parameter. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.4.1.1.21.1.3 | ColumnacMediaDspTemplateNumber | read-create | current | DSP template number. Access: Offline. AC INI-Param: DspTemplates_DspTemplateNumber |
| 1.3.6.1.4.1.5003.9.10.4.1.1.21.1.4 | ColumnacMediaDspResourcesPercentage | read-create | current | Percentage use for the specified template. Access: Offline. AC INI-Param: DspTemplates_DspResourcesPercentage |
| 1.3.6.1.4.1.5003.9.10.4.1.2 | NodeacMediaVoiceConfig | |||
| 1.3.6.1.4.1.5003.9.10.4.1.2.1 | NodeacVoice | |||
| 1.3.6.1.4.1.5003.9.10.4.1.2.1.1 | ScalaracVoicePayloadFormat | read-write | current | Sets the voice payload format. Choose either 0 = RTP or 1 = ATM (which enables working with vendors that use G.726 ATM Payload Format over RTP. Uses the enum a… |
| 1.3.6.1.4.1.5003.9.10.4.1.2.1.2 | ScalaracVoiceVolume | read-write | current | Defines the voice output gain control. Range: -32 dB to +31 dB in 1 dB steps -32 = mute Default = 0 = No Gain. Access: Online. AC INI-Param: VOICEVOLUME |
| 1.3.6.1.4.1.5003.9.10.4.1.2.1.3 | ScalaracVoiceInputGain | read-write | current | Defines the PCM input gain. Range = -32 dB to +31 dB in 1 dB steps. Default = No Gain. Access: Online. AC INI-Param: INPUTGAIN |
| 1.3.6.1.4.1.5003.9.10.4.1.2.1.4 | ScalaracVoiceTestMode | read-write | current | Defines the type of testing mode applied: 0 = Coder Loopback performs an encoder/decoder loopback inside the DSP device 1 = PCM Loopback loops back an incoming… |
| 1.3.6.1.4.1.5003.9.10.4.1.2.1.5 | ScalaracVoiceTTYTransportType | read-write | current | Defines the transferring method of TTY signals during a call 0 = Disable 1= Bypass 2 = Relay . Access: Online. AC INI-Param: TTYTRANSPORTTYPE |
| 1.3.6.1.4.1.5003.9.10.4.1.2.1.6 | ScalaracVoiceEnableMediaSecurity | read-write | current | Enables or disables Media Security protocol (SRTP) . Enabling this parameter might reduce the board channel capacity. 0 = Disable 1 = Enable. Access: Offline. … |
| 1.3.6.1.4.1.5003.9.10.4.1.2.1.7 | ScalaracVoiceAriaProtocolSupport | read-write | current | Enables or disables Aria encryption protocol. Enabling this parameter might reduce the board channel capacity. 0 = Disable 1 = Enable Supported on TP6310, TP84… |
| 1.3.6.1.4.1.5003.9.10.4.1.2.1.20 | NodeacVoiceCoderRate | |||
| 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.1 | ScalaracVoiceCoderRateEVRC | read-write | current | This parameter is used to configure the EVRC coder bit rate. 0 = Variable Rate 1 = 1 kbps 2 = 4 kbps 3 = 8 kbps. Access: Online. AC INI-Param: EVRCRate |
| 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.2 | ScalaracVoiceCoderRateQCELP8 | read-write | current | This parameter is used to configure the QCELP8 coder bit rate. 0 = Variable Rate 1 = 1 kbps 2 = 2 kbps 3 = 4 kbps 4 = 8 kbps. Access: Online. AC INI-Param: QCE… |
| 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.3 | ScalaracVoiceCoderRateQCELP13 | read-write | current | This parameter is used to configure the QCELP13 coder bit rate. 0 = Variable Rate 1 = 1 kbps 2 = 3 kbps 3 = 7 kbps 4 = 13 kbps . Access: Online. AC INI-Param: … |
| 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.4 | ScalaracVoiceCoderRateG729EVMaxBitRate | read-write | current | Determines the maximum generation bitrate for all participants in a session using G729EV coder. This parameter is defined per session and is equal for all the … |
| 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.5 | ScalaracVoiceCoderRateG729EVLocalMBS | read-write | current | Determines the maximal bitrate, which may be used by the G729EV coder at a specific channel. This parameter is defined per channel and may vary between the par… |
| 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.6 | ScalaracVoiceCoderRateG729EVReceiveMBS | read-write | current | Determines the value of the MBS field of the G729EV frames to be sent to the other party. This parameter reflects the maximum bit rate, which the local G729EV … |
| 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.7 | ScalaracVoiceCoderRateMsRtaForwardErrorCorrectionEnable | read-write | current | Determines the Microsoft RTA coder forward error correction mode. 0 - Disable. 1 - Enable. Access: Online. AC INI-Param: MSRTAForwardErrorCorrectionEnable |
| 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.8 | ScalaracVoiceCoderRateMsRtaTxBitRate | read-write | current | Determines the Microsoft RTA coder TX bit rate. 0 - Automatic. Any value between 8,800 - 29,000. Access: Online. AC INI-Param: MSRTATxBitRate |
| 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.9 | ScalaracVoiceCoderRateSilkTxInbandFEC | read-write | current | Determines the SILK encoder forward error correction mode. Access: Online. AC INI-Param: SilkTxInbandFEC |
| 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.10 | ScalaracVoiceCoderRateSilkMaxAverageBitRate | read-write | current | Determines the SILK encoder maximal average bit rate. Narrow band range is 5000-16000 .Wide band range is 8000-30000. Access: Online. AC INI-Param: SilkMaxAver… |
| 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.11 | ScalaracVoiceCoderRateSpeexNBBitRate | read-write | current | Determines the bitrate of Speex NB coder. Access: Instant. AC INI-Param: SpeexNBBitRate |
| 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.12 | ScalaracVoiceCoderRateSpeexWBBitRate | read-write | current | Determines the bitrate of Speex WB coder. Access: Instant. AC INI-Param: SpeexWBBitRate |
| 1.3.6.1.4.1.5003.9.10.4.1.2.2 | NodeacVoiceAGC | |||
| 1.3.6.1.4.1.5003.9.10.4.1.2.2.1 | ScalaracVoiceAGCEnable | read-write | current | Activates the AGC (Automatic Gain Control). 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLEAGC |
| 1.3.6.1.4.1.5003.9.10.4.1.2.2.2 | ScalaracVoiceAGCGainSlope | read-write | current | Determines the AGC (Automatic Gain Control) convergence rate. Range = 0 to 31 (according to acTAGCGainSlope) Default = 3 (= 1 db/sec). Access: Online. AC INI-P… |
| 1.3.6.1.4.1.5003.9.10.4.1.2.2.3 | ScalaracVoiceAGCRedirection | read-write | current | Determines the AGC (Automatic Gain Control) direction. 0 = AGC works on signals from the TDM side 1 = AGC works on signals coming from the Network side. Access… |
| 1.3.6.1.4.1.5003.9.10.4.1.2.2.4 | ScalaracVoiceAGCTargetEnergy | read-write | current | Determines the signal energy value [-dBm] that the AGC (Automatic Gain Control) attempts to attain. Range = 0 to 63. Access: Online. AC INI-Param: AGCTARGETENE… |
| 1.3.6.1.4.1.5003.9.10.4.1.2.2.5 | ScalaracVoiceAGCMinGain | read-write | current | Defines the minimum gain by the AGC when activated [- db]. Range = 0 to -31. Access: Offline. AC INI-Param: AGCMINGAIN |
| 1.3.6.1.4.1.5003.9.10.4.1.2.2.6 | ScalaracVoiceAGCMaxGain | read-write | current | Defines the maximum gain by the AGC when activated [db]. Range = 0 to 18. Access: Offline. AC INI-Param: AGCMAXGAIN |
| 1.3.6.1.4.1.5003.9.10.4.1.2.2.7 | ScalaracVoiceAGCDisableFastAdaptation | read-write | current | Disables the AGC Fast Adaptation mode. Enable = 1 Disable = 0. Access: Offline. AC INI-Param: AGCDISABLEFASTADAPTATION |
| 1.3.6.1.4.1.5003.9.10.4.1.2.3 | NodeacVoiceEC | |||
| 1.3.6.1.4.1.5003.9.10.4.1.2.3.1 | ScalaracVoiceECEnable | read-write | current | Enables or disables the Echo Canceller. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLEECHOCANCELLER |
| 1.3.6.1.4.1.5003.9.10.4.1.2.3.2 | ScalaracVoiceECMaxLength | read-write | current | Defines the maximum board EC (Echo Canceler) length capability. 0 = EC length determined internally to reach maximum channel capacity. 4 = 32 msec 11 = 64 msec… |
| 1.3.6.1.4.1.5003.9.10.4.1.2.3.3 | ScalaracVoiceECHybridLoss | read-write | current | Sets the worst case ratio between the signal level transmitted to the hybrid and the echo level returning from hybrid. Set this per worst hybrid in the system … |
| 1.3.6.1.4.1.5003.9.10.4.1.2.3.4 | ScalaracVoiceECToneDetector | read-write | current | Used to configure the Echo Canceler Tone Detector. Detects a 2100 Hz tone at the input signal to the TDM (received signal). Improves Echo Canceler operation ac… |
| 1.3.6.1.4.1.5003.9.10.4.1.2.3.5 | ScalaracVoiceECComfortNoiseGeneration | read-write | current | Use this parameter to enable or enable Echo Canceler Comfort Noise Generation, which generates comfort noise when the Non Linear Processor (NLP) is active. Whe… |
| 1.3.6.1.4.1.5003.9.10.4.1.2.4 | NodeacVoiceSC | |||
| 1.3.6.1.4.1.5003.9.10.4.1.2.4.1 | ScalaracVoiceSCMode | read-write | current | Enables or disables Silence Suppression Mode. 0 = Disable = SILENCE_COMPRESION_DISABLE 1 = Enable = SILENCE_COMPRESION_ENABLE 2 = Enable without adaptation = S… |
| 1.3.6.1.4.1.5003.9.10.4.1.2.4.2 | ScalaracVoiceSCVBRCoderDTXMin | read-write | current | Defines the minimum number of frames gap between two SID frames, when using the EVRC voice activity detector. . Access: Online. AC INI-Param: EVRCDTXMin |
| 1.3.6.1.4.1.5003.9.10.4.1.2.4.3 | ScalaracVoiceSCVBRCoderDTXMax | read-write | current | Defines the maximum number of frames gap between two SID frames, when using the EVRC voice activity detector. Access: Online. AC INI-Param: EVRCDTXMax |
| 1.3.6.1.4.1.5003.9.10.4.1.2.4.4 | ScalaracVoiceSCVBRCoderHangover | read-write | current | For indicating the desired number of silence frames at the beginning of each silence period, when using the VBR CODER silence suppression. . Access: Online. AC… |
| 1.3.6.1.4.1.5003.9.10.4.1.3 | NodeacMediaFaxModemConfig | |||
| 1.3.6.1.4.1.5003.9.10.4.1.3.1 | NodeacFaxModem | |||
| 1.3.6.1.4.1.5003.9.10.4.1.3.1.1 | NodeacFMCommon | |||
| 1.3.6.1.4.1.5003.9.10.4.1.3.1.1.1 | ScalaracFMCommonRelayVolume | read-write | current | Determines the fax gain control. The range -18 to -3 relates to -18.5 dBm to -3.5 dBm in steps of 1 dBm. Access: Online. AC INI-Param: FAXMODEMRELAYVOLUME |
| 1.3.6.1.4.1.5003.9.10.4.1.3.1.1.2 | ScalaracFMCommonV34Transport | read-write | current | Sets the V.34 modem transport method. 0 = Transparent 2 = Bypass 3 = Transparent with Events 4 = AnsMute. Access: Online. AC INI-Param: V34MODEMTRANSPORTTYPE |
| 1.3.6.1.4.1.5003.9.10.4.1.3.1.1.3 | ScalaracFMCommonEnableInbandNetworkDetection | read-write | current | Enables or disables inband network detection related to fax/modem. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: EnableFaxModemInbandNetworkDetection |
| 1.3.6.1.4.1.5003.9.10.4.1.3.1.1.4 | ScalaracFMCommonCEDTransferMode | read-write | current | 0 - transfer CED using T38. 1 - transfer CED over VBD(some Vxx=2) or VoIP(Vxx=0). 2 - transfer CED using RFC, and block CED over VBD/VoIP. 3 - transfer CED usi… |
| 1.3.6.1.4.1.5003.9.10.4.1.3.1.2 | NodeacFMBypass | |||
| 1.3.6.1.4.1.5003.9.10.4.1.3.1.2.1 | ScalaracFMBypassCoderType | read-write | current | Users can use this parameter to set the fax/modem bypass coder (according to acTCoders). 0 = G.711 A-Law 1 = G.711 Mu-Law. Access: Online. AC INI-Param: FAXMOD… |
| 1.3.6.1.4.1.5003.9.10.4.1.3.1.2.2 | ScalaracFMBypassPacketizationPeriod | read-write | current | Defines the number of basic frames to generate one RTP fax/modem bypass packet. Access: Online. AC INI-Param: FAXMODEMBYPASSM |
| 1.3.6.1.4.1.5003.9.10.4.1.3.1.2.3 | ScalaracFMBypassBasicPacketInterval | read-write | current | Sets the basic Fax / Modem Bypass RTP packet rate. 0 = Default (set internally) (PACKET_INTERVAL_DEFAULT) 1 = 5 msec (PACKET_INTERVAL_5_MSEC) 2 = 10 msec (PACK… |
| 1.3.6.1.4.1.5003.9.10.4.1.3.1.2.4 | ScalaracFMBypassDJBufMinDelay | read-write | current | Determines the Jitter Buffer constant delay (in milliseconds) during a Fax & Modem Bypass session. (The minimum Jitter Buffer Size). Range = 0 to 150. Access: … |
| 1.3.6.1.4.1.5003.9.10.4.1.3.1.2.5 | ScalaracFMBypassFaxBypassOutputGain | read-write | current | Defines the fax bypass output gain control. Range: -31 dB to +31 dB in 1 dB steps Default = 0 = No Gain. Access: Online. AC INI-Param: FaxBypassOutputGain |
| 1.3.6.1.4.1.5003.9.10.4.1.3.1.2.6 | ScalaracFMBypassModemBypassOutputGain | read-write | current | Defines the modem bypass output gain control. Range: -31 dB to +31 dB in 1 dB steps Default = 0 = No Gain. Access: Online. AC INI-Param: ModemBypassOutputGain |
| 1.3.6.1.4.1.5003.9.10.4.1.3.1.3 | NodeacFMNSE | |||
| 1.3.6.1.4.1.5003.9.10.4.1.3.1.3.1 | ScalaracFMNSEPayloadType | read-write | current | Users can use this parameter to modify the NSE packet's payload type. Range = 96 to 127. Access: Online. AC INI-Param: NSEPAYLOADTYPE |
| 1.3.6.1.4.1.5003.9.10.4.1.3.1.3.2 | ScalaracFMNSEMode | read-write | current | Enables or disables Cisco's NSE fax / modem automatic pass-through mode. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: NSEMODE |
| 1.3.6.1.4.1.5003.9.10.4.1.3.2 | NodeacFax | |||
| 1.3.6.1.4.1.5003.9.10.4.1.3.2.1 | ScalaracFaxTransportMode | read-write | current | Sets the Fax over IP transport method. 0 = Transparent 1 = Relay 2 = Bypass 3 = Transparent with Events. Access: Online. AC INI-Param: FAXTRANSPORTMODE |
| 1.3.6.1.4.1.5003.9.10.4.1.3.2.2 | ScalaracFaxBypassPayloadType | read-write | current | Users can use this parameter to modify the Fax Bypass Mode RTP packet's payload type. In the case of congestion (if the selected payload type is already used f… |
| 1.3.6.1.4.1.5003.9.10.4.1.3.2.3 | ScalaracFaxRelayECMEnable | read-write | current | Enables or disables the using of ECM mode during Fax Relay. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: FAXRELAYECMENABLE |
| 1.3.6.1.4.1.5003.9.10.4.1.3.2.4 | ScalaracFaxRelayMaxRate | read-write | current | Limits the maximum rate at which fax messages are transmitted. 0 = 2400 bps 1 = 4800 bps 2 = 7200 bps 3 = 9600 bps 4 = 12000 bps 5 = 14400 bps 6 = 16800 bps 7 … |
| 1.3.6.1.4.1.5003.9.10.4.1.3.2.5 | ScalaracFaxRelayRedundancyDepth | read-write | current | Determines the depth of redundancy for fax packets. This parameter is applicable only to non-V.21 packets. 0 = No redundancy 1 = 1 packet redundancy 2 = 2 pack… |
| 1.3.6.1.4.1.5003.9.10.4.1.3.2.6 | ScalaracFaxEnhancedRelayRedundancyDepth | read-write | current | Determines the number of repetitions to be applied to control packets when using the T.38 standard. 0 = No redundancy 1 = 1 packet redundancy 2 = 2 packet redu… |
| 1.3.6.1.4.1.5003.9.10.4.1.3.2.7 | ScalaracFaxCNGDetectorMode | read-write | current | Determines the CNG Detector mode. 0 = Disable 1 = Relay 2 = Event Only. Access: Online. AC INI-Param: CNGDETECTORMODE |
| 1.3.6.1.4.1.5003.9.10.4.1.3.2.8 | ScalaracFaxV34TransportMethod | read-write | current | Determines the V.34 fax transport method. One of the following values: 0 = Transparent 1 = Relay 2 = Bypass 3 = Transparent with Events. Access: Online. AC INI… |
| 1.3.6.1.4.1.5003.9.10.4.1.3.2.9 | ScalaracFaxT38Version | read-write | current | T38 fax relay version. 0 = T.38 version 0 (from 06/1998) 3 = T.38 version 3 (V.34 over T.38 support) Default = 3. Access: Online. AC INI-Param: T38Version |
| 1.3.6.1.4.1.5003.9.10.4.1.3.3 | NodeacModem | |||
| 1.3.6.1.4.1.5003.9.10.4.1.3.3.1 | ScalaracModemV22Transport | read-write | current | Sets the V.22 modem transport method. 0 = Transparent 2 = Bypass 3 = Transparent with Events. Access: Online. AC INI-Param: V22MODEMTRANSPORTTYPE |
| 1.3.6.1.4.1.5003.9.10.4.1.3.3.2 | ScalaracModemV23Transport | read-write | current | Sets the V.23 modem transport method. 0 = Transparent 2 = Bypass 3 = Transparent with Events. Access: Online. AC INI-Param: V23MODEMTRANSPORTTYPE |
| 1.3.6.1.4.1.5003.9.10.4.1.3.3.3 | ScalaracModemV32Transport | read-write | current | Sets the V.32 modem transport method. 0 = Transparent 2 = Bypass 3 = Transparent with Events 4 = AnsMute. Access: Online. AC INI-Param: V32MODEMTRANSPORTTYPE |
| 1.3.6.1.4.1.5003.9.10.4.1.3.3.4 | ScalaracModemBypassPayloadType | read-write | current | Users can use this parameter to modify the Modem Bypass Mode RTP packet's payload type. In the case of congestion (if the selected payload type is already used… |
| 1.3.6.1.4.1.5003.9.10.4.1.3.3.5 | ScalaracModemBellTransportType | read-write | current | Use this parameter to set the Bell modem transport method. 0 = Transparent 2 = Bypass (enum ByPassEnable) 3 = Transparent with Events (enum EventsOnly). Access… |
| 1.3.6.1.4.1.5003.9.10.4.1.3.3.6 | ScalaracModemV21Transport | read-write | deprecated | Sets the V.21 modem transport method (must be set to 0 = Disable). 0 = Transparent 2 = Bypass 3 = Transparent with Events. Access: Online. AC INI-Param: V21Mod… |
| 1.3.6.1.4.1.5003.9.10.4.1.3.3.7 | ScalaracModemEnableV150ModemRelaySupport | read-write | obsolete | Determines whether to enable V.150.1 modem relay support. Range: 0 - Disable 1 - Enable. Access: Offline. AC INI-Param: EnableV150ModemRelaySupport |
| 1.3.6.1.4.1.5003.9.10.4.1.3.4 | NodeacV150dot1 | |||
| 1.3.6.1.4.1.5003.9.10.4.1.3.4.1 | ScalaracV150dot1AllocationProfile | read-write | current | Selects the V.150.1 profile, determining how many DSP channels have V.150.1 support. Range = 0 to 3. Access: Offline. AC INI-Param: V1501AllocationProfile |
| 1.3.6.1.4.1.5003.9.10.4.1.3.4.2 | ScalaracV150dot1SSEPayloadTypeRx | read-write | current | SSE payload type RX. Access: Online. AC INI-Param: V1501SSEPayloadTypeRx |
| 1.3.6.1.4.1.5003.9.10.4.1.3.4.3 | ScalaracV150dot1SSEPayloadTypeTx | read-write | current | SSE payload type TX. Access: Online. AC INI-Param: V1501SSEPayloadTypeTx |
| 1.3.6.1.4.1.5003.9.10.4.1.3.4.4 | ScalaracV150dot1SSERedundancyDepth | read-write | current | SSE is a part of V150.1 modem relay protocol and SSE messages are sent over RTP. SSE redundancy refers to the sending of SSE messages several times to increase… |
| 1.3.6.1.4.1.5003.9.10.4.1.3.4.5 | ScalaracV150dot1SPRTPayloadTypeRx | read-write | current | SPRT payload type RX. Access: Online. AC INI-Param: V1501SPRTPayloadTypeRx |
| 1.3.6.1.4.1.5003.9.10.4.1.3.4.6 | ScalaracV150dot1SPRTPayloadTypeTx | read-write | current | SPRT payload type TX. Access: Online. AC INI-Param: V1501SPRTPayloadTypeTx |
| 1.3.6.1.4.1.5003.9.10.4.1.3.4.7 | ScalaracV150dot1SPRTTransportChannel0MaxPayloadSize | read-write | current | SPRT transport channel 0 max payload size. Access: Online. AC INI-Param: V1501SPRTTransportChannel0MaxPayloadSize |
| 1.3.6.1.4.1.5003.9.10.4.1.3.4.8 | ScalaracV150dot1SPRTTransportChannel2MaxPayloadSize | read-write | current | SPRT transport channel 2 max payload size. Access: Online. AC INI-Param: V1501SPRTTransportChannel2MaxPayloadSize |
| 1.3.6.1.4.1.5003.9.10.4.1.3.4.9 | ScalaracV150dot1SPRTTransportChannel2MaxWindowSize | read-write | current | SPRT transport channel 2 max window size. Access: Online. AC INI-Param: V1501SPRTTransportChannel2MaxWindowSize |
| 1.3.6.1.4.1.5003.9.10.4.1.3.4.10 | ScalaracV150dot1SPRTTransportChannel3MaxPayloadSize | read-write | current | SPRT transport channel 3 max payload size. Access: Online. AC INI-Param: V1501SPRTTransportChannel3MaxPayloadSize |
| 1.3.6.1.4.1.5003.9.10.4.1.4 | NodeacMediaRtpRtcpConfig | |||
| 1.3.6.1.4.1.5003.9.10.4.1.4.1 | NodeacRtpRtcp | |||
| 1.3.6.1.4.1.5003.9.10.4.1.4.1.1 | ScalaracRtpRtcpBrokenConnectionEventTimeout | read-write | current | Determines for how long the RTP connection should be broken before the Broken Connection event is issued. In units of 100 msec. . Access: Online. AC INI-Param:… |
| 1.3.6.1.4.1.5003.9.10.4.1.4.1.2 | ScalaracRtpRtcpBrokenConnectionEventActivationMode | read-write | current | Determines if the broken connection mechanism is activated when the RTP stream is activated or when the first RTP packet is received. 0 = After First incoming … |
| 1.3.6.1.4.1.5003.9.10.4.1.4.1.3 | ScalaracRtpRtcpBasicRTPPacketInterval | read-write | current | Selects the RTP packet rate for sample based coders (such as G.711, G.726, G.727). Also applicable for G.729, G.729E & G.728. 0 = Default (set internally) 1 = … |
| 1.3.6.1.4.1.5003.9.10.4.1.4.1.4 | ScalaracRtpRtcpConnectionEstablishNotificationMode | read-write | current | Determines the notification mode for the RTP connection establishment event acEV_CONNECTION_ESTABLISHED. 0 = Notify only after a broken connection event 1 = Al… |
| 1.3.6.1.4.1.5003.9.10.4.1.4.1.5 | ScalaracRtpRtcpEnableMediaUDPChecksum | read-write | current | Determines whether to enable the UDP checksum calculation for RTP media TX over IPv4. One of the following possible values: 0 = Disable (No checksum: UDP check… |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2 | NodeacRtp | |||
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.1 | ScalaracRtpBaseUDPPort | read-write | current | Defines the lower boundary of UDP ports to be used by the board. The upper boundary is calculated on the basis of BoardBaseUDPPort + 10 * (Number of Channels).… |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.2 | ScalaracRtpComfortNoiseEnable | read-write | current | When set to 1 (Enable), SID packets are sent with the RTP SID type (RFC 3389). 0 = Disable 1 = Enable Determines whether Silence Indicator (SID) packets that a… |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.3 | ScalaracRtpEnableRFC2658Interleaving | read-write | obsolete | When enabled, RTP packets include an interleaving byte for VBR coders. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLERFC2658INTERLEAVING |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.4 | ScalaracRtpRxTxMode | read-write | current | Selects which RTP directions are enabled. Both Tx and Rx sides can be disabled. 0 = RTPTxRx 1 = RTPTxOnly 2 = RTPRxOnly 3 = RTPUnactive 4 = RTPRxRFC2833Tx. Acc… |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.5 | ScalaracRtpRFC2833TxPayloadType | read-write | current | Controls the RFC 2833 Tx Relay RTP Payload type. Range = 96 to 127. Access: Online. AC INI-Param: RFC2833TXPAYLOADTYPE |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.6 | ScalaracRtpRFC2833RxPayloadType | read-write | current | Controls the RFC 2833 Rx Relay RTP Payload type. Range = 96 to 127. Access: Online. AC INI-Param: RFC2833RXPAYLOADTYPE |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.7 | ScalaracRtpRedundancyPayloadType | read-write | current | This parameter sets the RFC 2198 (RTP Redundancy) packet's parameter 'RTP Payload Type'. Range: 96 to 127. Access: Online. AC INI-Param: RFC2198PAYLOADTYPE |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.8 | ScalaracRtpRedundancyDepth | read-write | current | Redundancy depth of RFC 2198 redundancy packets. 0 = Disabled In Gen 3 boards: range is 0-5 For other Gens 0-1. Access: Online. AC INI-Param: RTPREDUNDANCYDEPTH |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.9 | ScalaracRtpPacketizationFactor | read-write | current | Defines the number of DSP payloads for generating one RTP packet. Range = Hardware dependent. Access: Online. AC INI-Param: RTPPACKINGFACTOR |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.10 | ScalaracRtpNoOpPayloadType | read-write | current | User can modify the Noop packets RTP Payload type by setting this parameter. Range = 96 to 127. Access: Online. AC INI-Param: RTPNOOPPAYLOADTYPE |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.11 | ScalaracRtpNoOpEnable | read-write | current | Enables / disable Noop packets sending mode. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: NoOpEnable |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.12 | ScalaracRtpNoOpInterval | read-write | current | Used to modify the Noop packets sending interval Parameter value is in milliseconds Default value = 10 sec (10000 msec) Range = 20 to 600000 (20 msec to 10 min… |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.13 | ScalaracRtpVBRCoderHeaderFormat | read-write | current | 0 - payload only (no header, no toc, no m-factor) 1- support RFC 2658 format, 1 byte for interleaving header (always 0) and toc, no m-factor 2 � payload incl… |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.14 | ScalaracRtpAMRCoderHeaderFormat | read-write | current | AMR_CODER_HEADER_DEFAULT_FORMAT=0 - old m factor, each frame contains CRM byte and toc RFC_3267_BUNDLING=1 - single CRM byte followed by toc tables RFC_3267_IN… |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.15 | ScalaracRtpAMRFECRedundancyDepth | read-write | current | Sets the AMR / WB-AMR Redundancy depth according to RFC 3267. 0 = No Redundancy 1 = Redundancy depth of a single packet 2 = Redundancy depth of 2 packets 3 = R… |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.16 | ScalaracRtpAMRFECNumOfMngtPolicyEntries | read-write | current | Sets the number of entries to be defined at the AMR management policy table. Each entry defines the policy of a different rate. Access: Online. AC INI-Param: A… |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.17 | ScalaracRtpAMRFECDelayHysteresis | read-write | current | Defines the hysteresis of the Delay Threshold for AMR Hand-out events (in msec). Access: Online. AC INI-Param: AMRFECDELAYHYSTERESIS |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.18 | ScalaracRtpAMRFECDelayThreshold | read-write | current | Defines the one-way delay value (in msec) that may cause the AMR Hand Out report. 0 = 'Hand Out' report is disabled (default). Access: Online. AC INI-Param: AM… |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.19 | ScalaracRtpQcelpCoderHeaderFormat | read-write | current | Determines whether to define a separate header format for the QCELP coder (different to the header format of EVRC coder). One of the following values: -1 - QCE… |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.20 | ScalaracRtpAMROctetAlignedEnable | read-write | current | 0 = disable the AMR Octet Aligned mode. 1 = enable the AMR Octet Aligned mode. Access: Online. AC INI-Param: AmrOctetAlignedEnable |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.21 | NodeacAMRFECCodecPolicies | |||
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1 | TableacAMRFECCodecPoliciesTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1 | RowacAMRFECCodecPoliciesEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.1 | ColumnacAMRFECCodecPoliciesIndex | not-accessible | current | AC INI-Param: AMRFECCodecPolicies_Index |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.2 | ColumnacAMRFECCodecPoliciesRowStatus | read-create | current | AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.3 | ColumnacAMRFECCodecPoliciesRate | read-create | current | AMR Rate x of policy x (values 0-8). Access: Online. AC INI-Param: AMRFECCodecPolicies_Rate |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.4 | ColumnacAMRFECCodecPoliciesRedundancyLevel | read-create | current | Redundancy Level for policy x. Same values as �RFC 3267 Redundancy� field. Access: Online. AC INI-Param: AMRFECCodecPolicies_RedundancyLevel |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.5 | ColumnacAMRFECCodecPoliciesThreshold | read-create | current | FLR (Frame Loss Ratio) threshold of policy 1. Values are taken from 3GPP TS 44.318 (0-63). Access: Online. AC INI-Param: AMRFECCodecPolicies_Threshold |
| 1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.6 | ColumnacAMRFECCodecPoliciesHysteresis | read-create | current | Hysteresis of FLR threshold for policy 1. Values are taken from 3GPP TS 44.318. (0-15). Access: Online. AC INI-Param: AMRFECCodecPolicies_Hysteresis |
| 1.3.6.1.4.1.5003.9.10.4.1.4.3 | NodeacRtcp | |||
| 1.3.6.1.4.1.5003.9.10.4.1.4.3.1 | ScalaracRtcpDisableIntervalRandomization | read-write | current | Controls whether RTCP report intervals are randomized or whether each report interval accords exactly to the parameter defining RTCP Mean Tx Interval (in milli… |
| 1.3.6.1.4.1.5003.9.10.4.1.4.4 | NodeacRtcpXr | |||
| 1.3.6.1.4.1.5003.9.10.4.1.4.4.1 | ScalaracRtcpXrBurstThreshold | read-write | current | voice quality monitoring - excessive burst alert threshold. if set to -1, no alerts will be issued. Access: Online. AC INI-Param: VQMONBURSTHR |
| 1.3.6.1.4.1.5003.9.10.4.1.4.4.2 | ScalaracRtcpXrDelayThreshold | read-write | current | voice quality monitoring - excessive delay alert threshold. if set to -1, no alerts will be issued. Access: Online. AC INI-Param: VQMONDELAYTHR |
| 1.3.6.1.4.1.5003.9.10.4.1.4.4.3 | ScalaracRtcpXrEndOofCallRvalDelayThreshold | read-write | current | voice quality monitoring - end of call low quality alert threshold. if set to -1, no alerts will be issued. Access: Online. AC INI-Param: VQMONEOCRVALTHR |
| 1.3.6.1.4.1.5003.9.10.4.1.4.4.4 | ScalaracRtcpXrGMin | read-write | current | voice quality monitoring - minimum gap size (number of frames). Access: Online. AC INI-Param: VQMONGMIN |
| 1.3.6.1.4.1.5003.9.10.4.1.4.4.5 | ScalaracRtcpXrEnable | read-write | current | Sets voice quality monitoring (RTCP-XR) mode. 0 = Disable 1 = Enable all 2 = Enable Only Calculation. Access: Offline. AC INI-Param: VQMONENABLE |
| 1.3.6.1.4.1.5003.9.10.4.1.4.5 | NodeacVideoRtpRtcp | |||
| 1.3.6.1.4.1.5003.9.10.4.1.4.5.1 | ScalaracVideoRtpRtcpDisableRtcpIntervalRandomization | read-write | current | Determines whether to enable RTCP Interval Randomization. One of the following values: 0 Enable RTCP Interval Randomization 1 Disable RTCP Interval Randomizati… |
| 1.3.6.1.4.1.5003.9.10.4.1.4.5.2 | ScalaracVideoRtpRtcpMeanTxInterval | read-write | current | Defines the mean interval between two transmitted RTCP packets (milliseconds). If the interval is set to 0, no RTCP packets are transmitted at all. Access: Onl… |
| 1.3.6.1.4.1.5003.9.10.4.1.4.5.3 | ScalaracVideoRtpRtcpBrokenConnectionActivationMode | read-write | current | Broken connection event activation mode. 0 - Activate broken connection after the arrival of the first RTP packet. 1 - Activate broken connection immediately a… |
| 1.3.6.1.4.1.5003.9.10.4.1.4.5.4 | ScalaracVideoRtpRtcpBrokenConnectionEventTimeout | read-write | current | Timeout that defines when broken connection event occurs. Time resolution is 20msec. Access: Online. AC INI-Param: VideoBrokenConnectionEventTimeout |
| 1.3.6.1.4.1.5003.9.10.4.1.5 | NodeacMediaIBSConfig | |||
| 1.3.6.1.4.1.5003.9.10.4.1.5.1 | NodeacIBS | |||
| 1.3.6.1.4.1.5003.9.10.4.1.5.1.1 | ScalaracIBSAnalogSignalTransportType | read-write | current | Determines the analog signal transport type. 0 = Ignore 1 = Transfer hookflash via RFC 2833. Access: Online. AC INI-Param: ANALOGSIGNALTRANSPORTTYPE |
| 1.3.6.1.4.1.5003.9.10.4.1.5.1.2 | ScalaracIBSDTMFVolume | read-write | current | Defines and controls the DTMF generation volume [-dBm]. Range = -31 to 0. Access: Online. AC INI-Param: DTMFVOLUME |
| 1.3.6.1.4.1.5003.9.10.4.1.5.1.3 | ScalaracIBSDTMFTransportType | read-write | current | Defines the type of DTMF transport. 0 = Erase DTMFs from voice transport not relayed to remote 2 = DTMFs not erased are not relayed to remote 3 = DTMFs are mut… |
| 1.3.6.1.4.1.5003.9.10.4.1.5.1.4 | ScalaracIBSMFTransportType | read-write | current | Defines the type of MF transport. 0 = Erase MFs from voice transport not relayed to remote 2 = MFs not erased are not relayed to remote 3 = MFs are muted from … |
| 1.3.6.1.4.1.5003.9.10.4.1.5.1.5 | ScalaracIBSTrunkTestingTonesEnable | read-write | current | Enables or disables trunk testing tones. 0 = Disables trunk testing tones 1 = Enables trunk testing tones. Access: Offline. AC INI-Param: ENABLETRUNKTESTINGTON… |
| 1.3.6.1.4.1.5003.9.10.4.1.5.1.6 | ScalaracIBSCASRelayTransportMode | read-write | current | Controls the ABCD signaling transport type over IP. 0 = No Relay over the network 1 = Enable CAS relay according to RFC 2833. Access: Online. AC INI-Param: CAS… |
| 1.3.6.1.4.1.5003.9.10.4.1.5.1.7 | ScalaracIBSRxDtmfHangOverTime | read-write | current | Used to configure the Voice Silence time (in ms units) after playing DTMF or MF digits to the TDM side that arrived as Relay from the Network side. Range from … |
| 1.3.6.1.4.1.5003.9.10.4.1.5.1.8 | ScalaracIBSTxDtmfHangOverTime | read-write | current | Voice Silence time (in ms units) after detecting the end of DTMF or MF digits at the TDM side when the DTMF Transport Type is either Relay or Mute.This feature… |
| 1.3.6.1.4.1.5003.9.10.4.1.5.1.9 | ScalaracIBSDTMFTwistControl | read-write | current | Defines a delta (in dB) between the high and low frequency component in the DTMF signal. dB Positive values cause the higher frequency component to be stronger… |
| 1.3.6.1.4.1.5003.9.10.4.1.5.1.10 | ScalaracIBSNTEMaxDuration | read-write | current | Maximal time for sending NTEs (Named Telephony Events) to the network, regardless of the time range when the TDM signal is detected. -1= NTE will stop only upo… |
| 1.3.6.1.4.1.5003.9.10.4.1.5.2 | NodeacIBSDetectors | |||
| 1.3.6.1.4.1.5003.9.10.4.1.5.2.1 | ScalaracIBSDetectorsMFR1Enable | read-write | current | Enables or disables detection of MFR1 signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: MFR1DETECTORENABLE |
| 1.3.6.1.4.1.5003.9.10.4.1.5.2.2 | ScalaracIBSDetectorsMFR2ForwardEnable | read-write | current | Enables or disables detection of MFR2 forward signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: MFR2FORWARDDETECTORENABLE |
| 1.3.6.1.4.1.5003.9.10.4.1.5.2.3 | ScalaracIBSDetectorsMFR2BackwardEnable | read-write | current | Enables or disables detection of MFR2 backward signaling. Access: Online. AC INI-Param: MFR2BACKWARDDETECTORENABLE |
| 1.3.6.1.4.1.5003.9.10.4.1.5.2.4 | ScalaracIBSDetectorsR1LineEnable | read-write | current | Enables or disables detection of Line signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: R1LINEDETECTORENABLE |
| 1.3.6.1.4.1.5003.9.10.4.1.5.2.5 | ScalaracIBSDetectorsR2LineEnable | read-write | current | Enables or disables detection of Line signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: R2LINEDETECTORENABLE |
| 1.3.6.1.4.1.5003.9.10.4.1.5.2.6 | ScalaracIBSDetectorsAC15Enable | read-write | current | Enables or disables detection of Line signaling. Access: Online. AC INI-Param: AC15DETECTORENABLE |
| 1.3.6.1.4.1.5003.9.10.4.1.5.2.7 | ScalaracIBSDetectorsDTMFEnable | read-write | current | Enables or disables detection of DTMF signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: DTMFDETECTORENABLE |
| 1.3.6.1.4.1.5003.9.10.4.1.5.2.8 | ScalaracIBSDetectorsCallProgressEnable | read-write | current | Enables or disables detection of Call Progress Tones. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: CALLPROGRESSDETECTORENABLE |
| 1.3.6.1.4.1.5003.9.10.4.1.5.2.9 | ScalaracIBSDetectorsUserDefinedToneEnable | read-write | current | Enables or disables detection of User Defined Tones signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: USERDEFINEDTONEDETECTORENABLE |
| 1.3.6.1.4.1.5003.9.10.4.1.5.2.10 | ScalaracIBSDetectorsDetectionRedirection | read-write | current | Determines the IBS (In-Band Signaling) Detection Direction. 0 = PCM 1 = Network. Access: Online. AC INI-Param: IBSDETECTIONREDIRECTION |
| 1.3.6.1.4.1.5003.9.10.4.1.5.2.11 | ScalaracIBSDetectorsSS4Enable | read-write | current | Enables or disables detection of Line signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: SS4DETECTORENABLE |
| 1.3.6.1.4.1.5003.9.10.4.1.5.2.12 | ScalaracIBSDetectorsMFSS5Enable | read-write | current | Enables or disables detection of MF SS5 line signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: MFSS5DETECTORENABLE |
| 1.3.6.1.4.1.5003.9.10.4.1.5.2.13 | ScalaracIBSDetectorsSS5Enable | read-write | current | Detection of Line signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: SS5DETECTORENABLE |
| 1.3.6.1.4.1.5003.9.10.4.1.5.2.14 | ScalaracIBSDetectorsSITEnable | read-write | current | Enables or disables SIT (Special Information Tone) detection according to the ITU-T recommendation E.180/Q.35. 0 = Disable 1 = Enable. Access: Offline. AC INI-… |
| 1.3.6.1.4.1.5003.9.10.4.1.5.2.15 | ScalaracIBSDetectorsCOTEnable | read-write | current | Enables or disables Continuity Test tone detection and generation according to the ITU-T Q.724 recommendation. 0 = Disable 1 = Enable. Access: Offline. AC INI-… |
| 1.3.6.1.4.1.5003.9.10.4.1.5.2.16 | ScalaracIBSDetectorsR1DetectionStandard | read-write | current | This parameter determines which one of the R1 MF protocol flavors will be used for detection. 0 = ITU 1 = R1.5. Access: Offline. AC INI-Param: R1DetectionStand… |
| 1.3.6.1.4.1.5003.9.10.4.1.5.2.17 | ScalaracIBSDetectorsUDTDetectorFrequencyDeviation | read-write | current | Defines the deviation allowed for the detection of each signal frequency. Units are in Hertz. Valid values range 1-50. Default value 50 Hz. . Access: Offline. … |
| 1.3.6.1.4.1.5003.9.10.4.1.5.2.18 | ScalaracIBSDetectorsCPTDetectorFrequencyDeviation | read-write | current | Defines the deviation allowed for the detection of each CPT signal frequency. Units are in Hertz. Valid values range 1-30. Default value 10 Hz. . Access: Offli… |
| 1.3.6.1.4.1.5003.9.10.4.1.6 | NodeacIPMediaConfig | |||
| 1.3.6.1.4.1.5003.9.10.4.1.6.1 | NodeacIPMedia | |||
| 1.3.6.1.4.1.5003.9.10.4.1.6.1.1 | ScalaracIPMediaDSPDetectorsEnable | read-write | current | Enables or disables DSP IP Media Detectors. Enabling this parameter might reduce the board channel capacity. 0 = Disable 1 = Enable. Access: Offline. AC INI-Pa… |
| 1.3.6.1.4.1.5003.9.10.4.1.6.1.2 | ScalaracIPMediaEnableMCApplication | read-write | current | Enables media control functionality. Access: Offline. AC INI-Param: ENABLEMEDIACONTROL |
| 1.3.6.1.4.1.5003.9.10.4.1.6.2 | NodeacIPMAnswerDetector | |||
| 1.3.6.1.4.1.5003.9.10.4.1.6.2.1 | ScalaracIPMAnswerDetectorEnable | read-write | current | Enables or disables activation of the AD (Answer Detector). 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLEANSWERDETECTOR |
| 1.3.6.1.4.1.5003.9.10.4.1.6.2.2 | ScalaracIPMAnswerDetectorActivityDelay | read-write | current | Controls (in 100 msec resolution) the time between sending Activation command (AnswerDetector = 1) and the time that the detector actually starts to work. Rang… |
| 1.3.6.1.4.1.5003.9.10.4.1.6.2.3 | ScalaracIPMAnswerDetectorSilenceTime | read-write | current | This parameter controls the silence time period (in 100 msec resolution) from no speech input until the END_OF_SPEECH event is sent. 10 = 1 second Range = 0 to… |
| 1.3.6.1.4.1.5003.9.10.4.1.6.2.4 | ScalaracIPMAnswerDetectorRedirection | read-write | current | Determines the AD (Answer Detector) Redirection. 0 (PCM) = Speech from the PCM side is detected 1 (Network) = Speech from the IP side is detected. Access: Onli… |
| 1.3.6.1.4.1.5003.9.10.4.1.6.2.5 | ScalaracIPMAnswerDetectorSensitivity | read-write | current | Controls the AD (Answer Detector) sensitivity. The allowed values are different for different boards: DSP Gen2-based products: range 0 - 2, default 0. DSP Gen2… |
| 1.3.6.1.4.1.5003.9.10.4.1.6.3 | NodeacIPMEnergyDetector | |||
| 1.3.6.1.4.1.5003.9.10.4.1.6.3.1 | ScalaracIPMEnergyDetectorEnable | read-write | current | Activates the ED (Energy Detector). 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLEENERGYDETECTOR |
| 1.3.6.1.4.1.5003.9.10.4.1.6.3.2 | ScalaracIPMEnergyDetectorQualityFactor | read-write | current | Determines the ED's (Energy Detector's) sensitivity (0 -10). 0 = Insensitive 10 = Most Sensitive Range = 0 to 10. Access: Online. AC INI-Param: ENERGYDETECTORQ… |
| 1.3.6.1.4.1.5003.9.10.4.1.6.3.3 | ScalaracIPMEnergyDetectorThreshold | read-write | current | Defines the ED's (Energy Detector's) threshold. A signal exceeding the threshold invokes an 'Above' or 'Below' event. ActualThreshold = -44 dBm + (EDThreshold … |
| 1.3.6.1.4.1.5003.9.10.4.1.6.3.4 | ScalaracIPMEnergyDetectorEnergyRedirection | read-write | current | Selects the direction of the energy detection. 0 = Detect from the TDM side 1 = Detect from the network side. Access: Online. AC INI-Param: ENERGYDETECTORREDIR… |
| 1.3.6.1.4.1.5003.9.10.4.1.6.4 | NodeacIPMediaPatternDetector | |||
| 1.3.6.1.4.1.5003.9.10.4.1.6.4.1 | ScalaracIPMediaPatternDetectorEnable | read-write | current | Enables or disables activation of the PD (Pattern Detector). 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLEPATTERNDETECTOR |
| 1.3.6.1.4.1.5003.9.10.4.1.6.4.2 | ScalaracIPMediaPatternDetectorDetectionThreshold | read-write | current | Defines the number of consecutive patterns to trigger the pattern detection event. Range = 0 to 31. Access: Offline. AC INI-Param: PDTHRESHOLD |
| 1.3.6.1.4.1.5003.9.10.4.1.6.5 | NodeacIPMediaAMD | |||
| 1.3.6.1.4.1.5003.9.10.4.1.6.5.1 | ScalaracIPMediaAMDDetectionDirection | read-write | current | Determines the AMD (Answer Machine Detector) detection direction. One of the following values: 0 = Detection from the TDM side 1 = Detection from the Network s… |
| 1.3.6.1.4.1.5003.9.10.4.1.6.5.2 | ScalaracIPMediaAMDSensitivity | read-write | current | Determines the AMD (Answer Machine Detector) detection sensitivity: 0 = Best detection of an answering machine 7 = Best detection of a live call. Access: Onlin… |
| 1.3.6.1.4.1.5003.9.10.4.1.6.5.3 | ScalaracIPMediaAMDDetectionSensitivityHighResolution | read-write | current | Determines the AMD (Answer Machine Detector) high resolution detection sensitivity. The high resolution has 16 levels of sensitivity while the normal resolutio… |
| 1.3.6.1.4.1.5003.9.10.4.1.6.5.4 | ScalaracIPMediaAMDSensitivityResolution | read-write | current | Determines the AMD (Answer Machine Detector) detection sensitivity resolution: 0 = Normal detection sensitivity resolution (8 sensitivity levels) 1 = High dete… |
| 1.3.6.1.4.1.5003.9.10.4.1.6.5.5 | ScalaracIPMediaAMDBeepDetectionTimeout | read-write | current | Determines the AMD (Answer Machine Detector) Beep detection timeout. Units of 100 milliseconds, values from 0 to 1638 (163.8 seconds). Access: Online. AC INI-P… |
| 1.3.6.1.4.1.5003.9.10.4.1.6.5.6 | ScalaracIPMediaAMDBeepDetectionSensitivity | read-write | current | Determines the AMD (Answer Machine Detector) Beep detection sensitivity. 0 - Least sensitive. 3 - Most sensitive. Access: Online. AC INI-Param: AMDBeepDetectio… |
| 1.3.6.1.4.1.5003.9.10.4.1.6.5.7 | ScalaracIPMediaAMDSensitivityParameterSuit | read-write | current | Determines the serial number of the AMD (Answer Machine Detector) parameter suit: 0 = USA Parameter Suit with normal detection sensitivity resolution (8 sensit… |
| 1.3.6.1.4.1.5003.9.10.4.1.6.5.8 | ScalaracIPMediaAMDSensitivityLevel | read-write | current | Determines the AMD (Answer Machine Detector) level of detection sensitivity. It has 16 levels of sensitivity : 0 = Best detection of an answering machine 15 = … |
| 1.3.6.1.4.1.5003.9.10.4.1.6.6 | NodeacIPMConference | |||
| 1.3.6.1.4.1.5003.9.10.4.1.6.6.1 | ScalaracIPMConferenceGASNMinInterval | read-write | current | Minimum interval between Active Speaker Notification (ASN) events. An ASN event reports on the active speakers in a conference. The event is issued whenever th… |
| 1.3.6.1.4.1.5003.9.10.4.1.6.6.2 | ScalaracIPMConferenceEnergythreshold | read-write | current | Conference - Minimum energy level for a user to be included in Active Speaker Notification (ASN) events (units: -dBm). Valid range 0 to (-39) dbm. Access: Inst… |
| 1.3.6.1.4.1.5003.9.10.4.1.6.6.3 | ScalaracIPMConferenceEnableHDConference | read-write | current | Enable\Disable HD Conference. Access: Offline. AC INI-Param: EnableHDConference |
| 1.3.6.1.4.1.5003.9.10.4.1.6.7 | NodeacIPMVideoConference | |||
| 1.3.6.1.4.1.5003.9.10.4.1.6.7.1 | ScalaracIPMVideoConferenceSwitchingInterval | read-write | current | Determines the video view rotation interval in seconds. Applicable when using timer trigger switching mode. Access: Online. AC INI-Param: VideoConferenceSwitch… |
| 1.3.6.1.4.1.5003.9.10.4.1.6.7.2 | ScalaracIPMVideoConferenceEnableActiveSpeakerHighlight | read-write | current | Highlights the speaker for participants viewing a symmetric layout (2x2 or 3x3) . 0 - Don't highlight active speaker. 1 - Highlight active speaker. Access: Onl… |
| 1.3.6.1.4.1.5003.9.10.4.1.6.7.3 | ScalaracIPMVideoConferenceParticipantType | read-write | current | Indicates a participant's capabilities in the conference. Regular (2) � Regular participant who is able to both send and receive video. . Access: Online. AC … |
| 1.3.6.1.4.1.5003.9.10.4.1.6.7.4 | ScalaracIPMVideoConferenceParticipantTriggerMode | read-write | current | Participant trigger mode defines the trigger for modifying the participant's view. Voice Activated Video Switch (0) � A participant�s view will be changed … |
| 1.3.6.1.4.1.5003.9.10.4.1.6.7.5 | ScalaracIPMVideoConferenceParticipantLayout | read-write | current | Indicates the participant's view layout. 1 user (0). 2*2 users (1). All same size. 3*3 users (2). All same size. . Access: Online. AC INI-Param: VideoConferenc… |
| 1.3.6.1.4.1.5003.9.10.4.1.6.7.6 | ScalaracIPMVideoConferenceEnableConferenceParticipantSelfView | read-write | current | Self view indication. 0 - The participant cannot view himself 1 - The participant can view himself. Access: Online. AC INI-Param: VideoEnableConferenceParticip… |
| 1.3.6.1.4.1.5003.9.10.4.1.7 | NodeacMediaCallerIDConfig | |||
| 1.3.6.1.4.1.5003.9.10.4.1.7.1 | NodeacCallerID | |||
| 1.3.6.1.4.1.5003.9.10.4.1.7.1.1 | ScalaracCallerIDTypes | read-write | current | Defines the supported Caller ID standard. 0 = Bellcore 1 = ETSI 2 = NTT 4 = British 16 = ETSI_ETS 17 = Denmark 18 = Indian 19 = Brazilian. Access: Online. AC I… |
| 1.3.6.1.4.1.5003.9.10.4.1.7.1.2 | ScalaracCallerIDTransportType | read-write | current | Defines the CallerID Transport type. 0 = Disable 1 = Relay 3 = Mute. Access: Online. AC INI-Param: CallerIDTransportType |
| 1.3.6.1.4.1.5003.9.10.4.1.7.1.3 | ScalaracCallerIDDTMFBasedMaxDigits | read-write | current | Determines the maximum number of DTMF digits in a DTMF-based Caller ID string. Range = 0 to 26. Access: Online. AC INI-Param: MAXDTMFDIGITSINCIDSTRING |
| 1.3.6.1.4.1.5003.9.10.4.1.7.1.4 | ScalaracCallerIDDTMFBasedMinDigits | read-write | current | Determines the mimumum number of DTMF digits in a DTMF-based Caller ID string. Range = 0 to 26. Access: Online. AC INI-Param: MINDTMFDIGITSINCIDSTRING |
| 1.3.6.1.4.1.5003.9.10.4.1.7.1.5 | ScalaracCallerIDNTTDIDSignallingForm | read-write | current | Configures the signalling format used when generating an NTT DID. 0 = FSK Siganl 1 = DTMF Based Signal. Access: Online. AC INI-Param: NTTDIDSignallingForm |
| 1.3.6.1.4.1.5003.9.10.4.1.8 | NodeacMediaNetworkConfig | |||
| 1.3.6.1.4.1.5003.9.10.4.1.8.1 | NodeacMediaNetwork | |||
| 1.3.6.1.4.1.5003.9.10.4.1.8.1.1 | ScalaracMediaNetworkDisableNAT | read-write | current | Enables or disables the NAT feature. 0 = Do not disable NAT 1 = Disable NAT. Access: Online. AC INI-Param: DISABLENAT |
| 1.3.6.1.4.1.5003.9.10.4.1.8.1.2 | ScalaracMediaNetworkRtpIpTos | read-write | deprecated | Sets value of IP Type Of Service field in IP header for all packets generated from this channel. Follow the acTIPTOS enumeration. Access: Instant. AC INI-Param… |
| 1.3.6.1.4.1.5003.9.10.4.1.8.1.3 | ScalaracMediaNetworkRtpIpPrecedence | read-write | deprecated | Sets value of the IP precedence field in the IP header for all packets generated from this channel. Follow the acTIPPrecedence enumeration. Access: Instant. AC… |
| 1.3.6.1.4.1.5003.9.10.4.1.8.1.4 | ScalaracMediaNetworkIPDiffServ | read-write | deprecated | Defines the value of the 'DiffServ' field in the IP header for media (RTP) traffic. Range: 0 to 63. Access: Instant. AC INI-Param: IPDIFFSERV |
| 1.3.6.1.4.1.5003.9.10.4.1.8.1.5 | ScalaracMediaNetworkInboundLatchMode | read-write | current | Determines the way of handling incoming media packets from non-expected address/port. Access: Online. AC INI-Param: InboundMediaLatchMode |
| 1.3.6.1.4.1.5003.9.10.4.1.9 | NodeacMediaJBConfig | |||
| 1.3.6.1.4.1.5003.9.10.4.1.9.1 | NodeacJitterBuffer | |||
| 1.3.6.1.4.1.5003.9.10.4.1.9.1.1 | ScalaracJitterBufferMinDelay | read-write | current | Defines the Dynamic Jitter Buffer Minimum Delay (in msec). Recommended value for a regular voice call is 10. Access: Online. AC INI-Param: DJBUFMINDELAY |
| 1.3.6.1.4.1.5003.9.10.4.1.9.1.2 | ScalaracJitterBufferOptFactor | read-write | current | Defines the Dynamic Jitter Buffer frame error/delay optimization. Recommended value for a regular voice call is 10. Access: Online. AC INI-Param: DJBUFOPTFACTOR |
| 1.3.6.1.4.1.5003.9.10.4.1.9.2 | NodeacVideoJitterBuffer | |||
| 1.3.6.1.4.1.5003.9.10.4.1.9.2.1 | ScalaracVideoJitterBufferMinDelay | read-write | current | Jitter buffer minimum delay in milliseconds. Must be less than JitterBufferMaxDelay. Access: Online. AC INI-Param: VideoJitterBufferMinDelay |
| 1.3.6.1.4.1.5003.9.10.4.1.9.2.2 | ScalaracVideoJitterBufferMaxDelay | read-write | current | Jitter buffer maximum delay in milliseconds. Access: Online. AC INI-Param: VideoJitterBufferMaxDelay |
| 1.3.6.1.4.1.5003.9.10.4.1.9.2.3 | ScalaracVideoJitterBufferDJBOptimizationFactor | read-write | current | JB Optimization Factor controls the jitter buffer's adaptation rates A High factor means fast adaptation when jitter increases, and a slow adaptation when jitt… |
| 1.3.6.1.4.1.5003.9.10.4.1.10 | NodeacMediaAggregation | |||
| 1.3.6.1.4.1.5003.9.10.4.1.10.1 | ScalaracMediaAggregationRemoteBaseUDPPort | read-write | current | Remote Base UDP Port For Aggrigation. Access: Offline. AC INI-Param: REMOTEBASEUDPPORT |
| 1.3.6.1.4.1.5003.9.10.4.1.10.2 | ScalaracMediaAggregationL1L1ComplexRxUDPPort | read-write | current | The UDP port for the incoming (from the remote side) and the outgoing (destination UDP) packets, for Complex Multiplexed RTP mode. Access: Offline. AC INI-Para… |
| 1.3.6.1.4.1.5003.9.10.4.1.10.3 | ScalaracMediaAggregationL1L1ComplexTxUDPPort | read-write | current | The Source UDP port for the outgoing UDP Multiplexed RTP packets, for Complex-Multiplex RTP mode. Access: Offline. AC INI-Param: L1L1ComplexTxUDPPort |
| 1.3.6.1.4.1.5003.9.10.4.1.11 | NodeacStreamingCache | |||
| 1.3.6.1.4.1.5003.9.10.4.1.11.1 | ScalaracStreamingCacheSize | read-write | current | Sets the streaming cache size in MBs. The remaining size (out of 32MBs) is used as VoicePrompt storage. Access: Offline. AC INI-Param: gStreamingCacheSize |
| 1.3.6.1.4.1.5003.9.10.4.1.11.2 | ScalaracStreamingCacheRefreshTime | read-write | current | Defines the streaming cache data refresh time in minutes. If -1 is set, refresh is off. Access: Offline. AC INI-Param: gStreamingCacheRefreshTime |
| 1.3.6.1.4.1.5003.9.10.4.1.11.3 | ScalaracStreamingCacheClearService | read-write | current | reset the streaming cache. Access: Instant. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.4.1.12 | NodeacMediaVideoConfig | |||
| 1.3.6.1.4.1.5003.9.10.4.1.12.1 | ScalaracMediaVideoConfigEncoderIntraInterval | read-write | current | Sets the frequency for the number of frames at which the encoder outputs an Intra frame. Access: Online. AC INI-Param: VideoEncoderIntraInterval |
| 1.3.6.1.4.1.5003.9.10.4.1.12.2 | ScalaracMediaVideoConfigMaxPacketSize | read-write | current | Sets the maximum packet size in bytes. Access: Online. AC INI-Param: VideoMaxPacketSize |
| 1.3.6.1.4.1.5003.9.10.4.1.12.3 | ScalaracMediaVideoConfigTargetBitrate | read-write | current | Sets the target output bit rate. Access: Online. AC INI-Param: VideoTargetBitrate |
| 1.3.6.1.4.1.5003.9.10.4.1.12.4 | ScalaracMediaVideoConfigQualityParameterForRateControl | read-write | current | This value determines the trade off between video quality and frame rate. A low value indicates a higher quality with a lower frame rate and vice versa. Access… |
| 1.3.6.1.4.1.5003.9.10.4.1.12.5 | ScalaracMediaVideoConfigRateControlType | read-write | current | Sets bitrate output to either a constant or a variable bit rate. CBR (0) � Constant Bit Rate. VBR (1) � Variable Bit Rate. Target Bitrate indicates the tar… |
| 1.3.6.1.4.1.5003.9.10.4.1.12.6 | ScalaracMediaVideoConfigEnableReSyncHeader | read-write | current | Indicates whether to add a video packet header to every packet in order to increase error resilience. 0 - Disable 1 - Enable. Access: Online. AC INI-Param: Vid… |
| 1.3.6.1.4.1.5003.9.10.4.1.12.7 | ScalaracMediaVideoConfigEnableAudioVideoSynchronization | read-write | current | Determines whether to enable audio and video synchronization. 0 - No synchronization between audio and video streams 1 - Synchronization between audio and vide… |
| 1.3.6.1.4.1.5003.9.10.4.1.13 | NodeacIPMediaChannels | |||
| 1.3.6.1.4.1.5003.9.10.4.1.13.1 | ScalaracIPMediaChannelsEnable | read-write | current | Whether to enable DSP channels reservation for IPmedia support. Relevant for Mediant 1000 board only. One of the following possible 0 = Disable 1 - Enable. Acc… |
| 1.3.6.1.4.1.5003.9.10.4.1.13.21 | TableacIPMediaChannelsResourcesTable | not-accessible | current | IPMedia channels info |
| 1.3.6.1.4.1.5003.9.10.4.1.13.21.1 | RowacIPMediaChannelsResourcesEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.4.1.13.21.1.1 | ColumnacIPMediaChannelsResourcesIndex | not-accessible | current | Index Field for line. Internal parameter. AC INI-Param: IPMediaChannels_Index |
| 1.3.6.1.4.1.5003.9.10.4.1.13.21.1.2 | ColumnacIPMediaChannelsResourcesRowStatus | read-create | current | ROWSTATUS field for line. Internal parameter. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.4.1.13.21.1.3 | ColumnacIPMediaChannelsResourcesAction | read-create | current | Mangement Field for ACTIONS. Internal parameter. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.4.1.13.21.1.4 | ColumnacIPMediaChannelsResourcesActionRes | read-only | current | Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.4.1.13.21.1.5 | ColumnacIPMediaChannelsResourcesModuleID | read-create | current | Refers to M1K board only, module at which slot. Access: Offline. AC INI-Param: IPMediaChannels_ModuleID |
| 1.3.6.1.4.1.5003.9.10.4.1.13.21.1.6 | ColumnacIPMediaChannelsResourcesDSPChannelsReserved | read-create | current | How many DSP channels reserve for IPMedia channels. Access: Offline. AC INI-Param: IPMediaChannels_DSPChannelsReserved |
| 1.3.6.1.4.1.5003.9.10.4.1.14 | NodeacAcousticEchoSuppressor | |||
| 1.3.6.1.4.1.5003.9.10.4.1.14.1 | ScalaracAcousticEchoSuppressorEnable | read-write | current | Enable support of network echo suppressor on board level. Reduces board resource capacity. Access: Offline. AC INI-Param: ACOUSTICECHOSUPPRESSORSUPPORT |
| 1.3.6.1.4.1.5003.9.10.4.1.14.2 | ScalaracAcousticEchoSuppressorEchoCancellerType | read-write | current | Echo Canceller type. Line echo canceller for TDM Side or acoustic echo suppressor on network side. Access: Online. AC INI-Param: ECHOCANCELLERTYPE |
| 1.3.6.1.4.1.5003.9.10.4.1.14.3 | ScalaracAcousticEchoSuppressorAttenuationIntensity | read-write | current | Acoustic echo suppressor attenuation intensity. intensity of attenuation on signals identified as echo. Access: Online. AC INI-Param: ACOUSTICECHOSUPPATTENUATI… |
| 1.3.6.1.4.1.5003.9.10.4.1.14.4 | ScalaracAcousticEchoSuppressorMaxERLThreshold | read-write | current | Acoustic echo suppressor max ERL threshold in DB. Max ratio between signal level and retruned echo from phone. Access: Online. AC INI-Param: ACOUSTICECHOSUPPMA… |
| 1.3.6.1.4.1.5003.9.10.4.1.14.5 | ScalaracAcousticEchoSuppressorMinReferenceDelay | read-write | current | Acoustic echo suppressor MIN reference delay in mSec. The reference delay in the network helps echo suppression algorithm to identify echo signals. The entered… |
| 1.3.6.1.4.1.5003.9.10.4.1.14.6 | ScalaracAcousticEchoSuppressorMaxReferenceDelay | read-write | current | Acoustic echo suppressor MAX reference delay. The reference delay in the network helps echo suppression algorithm to identify echo signals. The entered value w… |
| 1.3.6.1.4.1.5003.9.10.4.2 | NodeacMediaStatus | |||
| 1.3.6.1.4.1.5003.9.10.4.2.1 | NodeacIPLegs | |||
| 1.3.6.1.4.1.5003.9.10.4.2.1.1 | TableacIPLegsTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.4.2.1.1.1 | RowacIPLegsEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.1 | ColumnacIPLegsLegIndex | not-accessible | current | Describes Rtp Endpoint In A Specific Call. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.2 | ColumnacIPLegsCallIndex | read-only | current | Decribes The Call which The Rtp EndPoint Participant In It. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.3 | ColumnacIPLegsRTPActive | read-only | current | Decribes whether the RTP is active or not. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.4 | ColumnacIPLegsCoderType | read-only | current | describes the coder Type. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.5 | ColumnacIPLegsSilenceCompression | read-only | current | Enables or Disables the Silence Compression. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.6 | ColumnacIPLegsDTMFDetection | read-only | current | Enables or Disables the DTMF Detection. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.7 | ColumnacIPLegsLocalRTPPort | read-only | current | Describes the RTP port of the Leg. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.8 | ColumnacIPLegsRemoteRTPAddress | read-only | current | Describes the RTP address. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.9 | ColumnacIPLegsFaxTransportType | read-only | current | Describes the Fax transfor Type currently working. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.10 | ColumnacIPLegsRxPackets | read-only | current | Describes the received packets on the Leg. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.11 | ColumnacIPLegsTxPackets | read-only | current | Describes the Transmitted packets on the Leg. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.12 | ColumnacIPLegsRxBytes | read-only | current | Describes the received Bytes on the Leg. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.13 | ColumnacIPLegsTxBytes | read-only | current | Describes the Transmitted packets on the Leg. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.14 | ColumnacIPLegsJitter | read-only | current | Describes the Jitter on the Leg. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.15 | ColumnacIPLegsPacketLoss | read-only | current | Describes the Lost packets on the Leg. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.16 | ColumnacIPLegsSSRCOfSender | read-only | current | Describes the SSRC Of the Sender. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.17 | ColumnacIPLegsDSPDevice | read-only | current | Describes the DSP Device Of the Leg. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.18 | ColumnacIPLegsLegName | read-only | current | Describes the Leg Name as in the Control Protocol. AC INI-Param: N/A |