AC-PSTN-MIB
135 objects
No module-level DESCRIPTION found.
Imported Objects
| AUDIOCODES-TYPES-MIB | acBoardMibs acGeneric acProducts acRegistrations audioCodes |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| RFC1155-SMI | IpAddress |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TAddress TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5003.9.10.9 | IdentityacPSTN | |||
| 1.3.6.1.4.1.5003.9.10.9.1 | NodeacPSTNConfiguration | |||
| 1.3.6.1.4.1.5003.9.10.9.1.1 | NodeacTrunkConfig | |||
| 1.3.6.1.4.1.5003.9.10.9.1.1.1 | NodeacTrunk | |||
| 1.3.6.1.4.1.5003.9.10.9.1.1.1.1 | TableacTrunkTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1 | RowacTrunkEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.1 | ColumnacTrunkIndex | read-only | current | Trunk ID at board in which the call is taking place. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.2 | ColumnacTrunkAdministrativeState | read-write | current | Trunk Administrative State. Access: Online. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.3 | ColumnacTrunkProtocolType | read-write | current | Used to set the PSTN protocol to be used for this trunk. Relevant only when TDMBusType=acFRAMERS (2). Either: NONE = 0 E1_EURO_ISDN = 1 T1_CAS = 2 T1_RAW_CAS =… |
| 1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.4 | ColumnacTrunkClockMaster | read-write | current | Used to select the trunk clock source. 0 = acCLOCK_MASTER_OFF (clock recovered from the line) 1 = acCLOCK_MASTER_ON (the trunk clock source is provided by the … |
| 1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.5 | ColumnacTrunkFramingMethod | read-write | current | Selects the Framing method to be used for this trunk. Access: Online. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.6 | ColumnacTrunkLineCode | read-write | current | Use to select line code. B8ZS or AMI for T1 spans and HDB3 or AMI for E1 spans. 0 = Use B8ZS line code (for T1 trunks only = default) 1 = Use AMI line code (fo… |
| 1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.7 | ColumnacTrunkTraceLevel | read-write | current | Defines the Trace level: acNO_TRACE = 0 acFULL_ISDN_TRACE = 1 acLAYER3_ISDN_TRACE = 2 acONLY_ISDN_Q931_MSGS_TRACE = 3 acLAYER3_ISDN_TRACE_NO_DUPLICATION = 4 ac… |
| 1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.8 | ColumnacTrunkDialPlanName | read-write | current | Sets the Dial Plan name that will be used on the specific trunk. Range = string 11 characters. Access: Instant. AC INI-Param: CasTrunkDialPlanName |
| 1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.9 | ColumnacTrunkLineType | read-only | current | Line type. lineTypeBRI(12) - If the physical type is BRI. lineTypeE1(10)/lineTypeT1(11) - For non BRI IF when there are other lines that are already configured… |
| 1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.10 | ColumnacTrunkAutoClockPriority | read-write | current | Defines the trunk priority for auto-clock fallback (Priority range: 0 - 100 (0 - 99 are priority settings, in which 0 = highest Priority and is the default set… |
| 1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.11 | ColumnacTrunkDeactivate | read-write | current | Deactivating a trunk forces AIS alarm on that trunk. Deactivation is used for trunk maintenance without locking the trunk. Activating the trunk will stop the a… |
| 1.3.6.1.4.1.5003.9.10.9.1.1.1.1.1.12 | ColumnacTrunkLoopbackConfig | read-write | current | This variable represents the loopback state of the trunk. Access: Offline. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.1.1.2 | NodeacTrunkLine | |||
| 1.3.6.1.4.1.5003.9.10.9.1.1.2.1 | TableacTrunkLineTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1 | RowacTrunkLineEntry | not-accessible | current | configuration of the DS1 interface. |
| 1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1.1 | ColumnacTrunkLineBuildOutLoss | read-write | current | Used to select the line build out loss to be used for this trunk. 0 = 0 dB 1 = 7.5 dB 2 = 15 dB 3 = 22.5 dB. Access: Online. AC INI-Param: LINEBUILDOUT.LOSS |
| 1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1.2 | ColumnacTrunkLineBuildOutOverwrite | read-write | current | Used to overwrite the Framer's XPM registers values (these registers control the line pulse shape). 0 = No overwrite 1 = Overwrite. Access: Online. AC INI-Para… |
| 1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1.3 | ColumnacTrunkLineBuildOutXPM0 | read-write | current | Used to control the Framer's XPM0 register value (line pulse shape control). Applicable only when TrunkConfig.LineBuildOut.Overwrite=1. Should be used only by … |
| 1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1.4 | ColumnacTrunkLineBuildOutXPM1 | read-write | current | Used to control the Framer's XPM1 register value (line pulse shape control). Applicable only when TrunkConfig.LineBuildOut.Overwrite=1. Should be used only by … |
| 1.3.6.1.4.1.5003.9.10.9.1.1.2.1.1.5 | ColumnacTrunkLineBuildOutXPM2 | read-write | current | Used to control the Framer's XPM2 register value (line pulse shape control). Applicable only when TrunkConfig.LineBuildOut.Overwrite=1. Should be used only by … |
| 1.3.6.1.4.1.5003.9.10.9.1.1.3 | NodeacTrunkISDN | |||
| 1.3.6.1.4.1.5003.9.10.9.1.1.3.1 | NodeacTrunkISDNCommon | |||
| 1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1 | TableacTrunkISDNCommonTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1 | RowacTrunkISDNCommonEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.1 | ColumnacTrunkISDNCommonTerminationSide | read-write | current | Used to set the ISDN Termination to either User or Network. Termination = For ISDN only. User side = 0 Network side = 1. Access: Online. AC INI-Param: TERMINAT… |
| 1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.2 | ColumnacTrunkISDNCommonQ931LayerResponseBehavior | read-write | current | Bit-field used to determine several behavior options, which influence how the Q.931 protocol behaves. Access: Online. AC INI-Param: ISDNIBEHAVIOR |
| 1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.3 | ColumnacTrunkISDNCommonIncomingCallsBehavior | read-write | current | This is the bit-field used to determine several behavior options that influence how the ISDN Stack INCOMING calls behave. Refer to the Appendix A.8 'ISDN Flexi… |
| 1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.4 | ColumnacTrunkISDNCommonOutgoingCallsBehavior | read-write | current | This is the bit-field used to determine several behavior options that influence how the ISDN Stack OUTGOING calls behave. Refer to Appendix A.8 in the 'VoPLib … |
| 1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.5 | ColumnacTrunkISDNCommonGeneralCCBehavior | read-write | current | This is the bit-field used to determine several general ISDN behavior options. Refer to the Appendix A.8 'ISDN Flexible Behavior' in the VoPLib Reference Libra… |
| 1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.6 | ColumnacTrunkISDNCommonIuaInterfaceId | read-only | current | Defines the IUA trunk interface ID value - unsigned integer - in RFC 3057 - SIGTRAN. Default = 0xFFFFFFFF. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.7 | ColumnacTrunkISDNCommonDuplicateQ931BuffMode | read-write | current | Activates / de-activates delivery of raw Q.931 messages. Refer to the VoPLib documentation ('ISDN Flexible Behavior'). Access: Online. AC INI-Param: ISDNDUPLIC… |
| 1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.8 | ColumnacTrunkISDNCommonBRILayer2Mode | read-write | current | Indicates point to point or point to Multipoint mode for layer2. Applicable in BRI trunks only. One of the following values: Point to point = 0 Point to Multip… |
| 1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.9 | ColumnacTrunkISDNCommonNSBehaviour2 | read-write | current | Bit-field used to determine several behavior options, which influence how the Q.931 protocol behaves. Refer to the VoPLib documentation (ISDN Flexible Behavior… |
| 1.3.6.1.4.1.5003.9.10.9.1.1.3.1.1.1.10 | ColumnacTrunkISDNCommonRestartBChannel | read-write | current | Sends restart request for a specific B-channel. Only ONE restart request at a time for a given trunk should be sent, since the restart state machine is not on … |
| 1.3.6.1.4.1.5003.9.10.9.1.1.3.2 | NodeacTrunkISDNNfas | |||
| 1.3.6.1.4.1.5003.9.10.9.1.1.3.2.1 | TableacTrunkISDNNfasTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.9.1.1.3.2.1.1 | RowacTrunkISDNNfasEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.9.1.1.3.2.1.1.1 | ColumnacTrunkISDNNfasDchConfig | read-write | current | Defines D-channel configuration. This setting is only applicable to ISDN PRI protocols that support NFAS and/or D-channel backup procedures. 0 = D-channel is P… |
| 1.3.6.1.4.1.5003.9.10.9.1.1.3.2.1.1.2 | ColumnacTrunkISDNNfasInterfaceId | read-write | current | Defines the Interface ID. Works with NS_EXPLICIT_INTERFACE_ID. Refer to the VoPLib documentation(ISDN Flexible Behavior). Default = (unsigned char)-1. Range = … |
| 1.3.6.1.4.1.5003.9.10.9.1.1.3.2.1.1.3 | ColumnacTrunkISDNNfasGroupNumber | read-write | current | Relevant only for T1 ISDN NFAS trunks indicates the group number of the NFAS group. ;Valid NFAS group numbers are only 1 to 9, 0 indicating that this trunk is … |
| 1.3.6.1.4.1.5003.9.10.9.1.1.3.3 | NodeacTrunkISDNDpnss | |||
| 1.3.6.1.4.1.5003.9.10.9.1.1.3.3.1 | TableacTrunkISDNDpnssTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.9.1.1.3.3.1.1 | RowacTrunkISDNDpnssEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.9.1.1.3.3.1.1.1 | ColumnacTrunkISDNDpnssBehavior | read-write | current | The DPNSSBehaviour parameter represents a Bit field parameter. Each bit represents a specific type of DPNSS behavior. Currently only the first 2 bits are in us… |
| 1.3.6.1.4.1.5003.9.10.9.1.1.3.3.1.1.2 | ColumnacTrunkISDNDpnssNumRealChannels | read-write | current | This parameter is relevant only to protocol ISDN DPNSS. Defines the number of real channels. Default value is 30. Valid range 1 to 30. Access: Online. AC INI-P… |
| 1.3.6.1.4.1.5003.9.10.9.1.1.3.3.1.1.3 | ColumnacTrunkISDNDpnssNumVirtualChannels | read-write | current | This parameter is relevant only to protocol ISDN DPNSS. Defines the number of virtual channels. Default value is 30. Valid range 0 to 30. Access: Online. AC IN… |
| 1.3.6.1.4.1.5003.9.10.9.1.1.4 | NodeacTrunkCAS | |||
| 1.3.6.1.4.1.5003.9.10.9.1.1.4.1 | TableacTrunkCASTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.9.1.1.4.1.1 | RowacTrunkCASEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.9.1.1.4.1.1.1 | ColumnacTrunkCASTablesIndex | read-write | current | This parameter determines which CAS protocol file to use on a specific trunk. The index value corresponds to the number configured for the parameter CASFileNam… |
| 1.3.6.1.4.1.5003.9.10.9.1.1.4.1.1.2 | ColumnacTrunkCASTablePerChannel | read-write | current | Sets the Cas protocol table index per channel. User need to set each channel the table number 0-7, with comma saperator between channels: '1,3,1,3,1,3..'. Acce… |
| 1.3.6.1.4.1.5003.9.10.9.1.1.5 | NodeacTrunkV5 | |||
| 1.3.6.1.4.1.5003.9.10.9.1.1.5.1 | TableacTrunkV5Table | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.9.1.1.5.1.1 | RowacTrunkV5Entry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.9.1.1.5.1.1.1 | ColumnacTrunkV5NumberOfCChannels | read-write | current | Indicates the number of timeslots used as communication channels in a V5 trunk. 0 - No C-channel, the trunk is voice only. 1 - Timeslot 16 is used for the V5 s… |
| 1.3.6.1.4.1.5003.9.10.9.1.1.5.1.1.2 | ColumnacTrunkV5ProtocolSide | read-write | current | Indicates the V5 side of the V5 protocol served by the trunk.. 0 - AN side. 1 - LE side . Access: Online. AC INI-Param: V5ProtocolSide |
| 1.3.6.1.4.1.5003.9.10.9.1.1.8 | NodeacTrunkGlobal | |||
| 1.3.6.1.4.1.5003.9.10.9.1.1.8.1 | ScalaracTrunkGlobalLifeLineType | read-write | current | This parameter is used to define the type of trunk lifeline. Short trunks 1-2, 3-4. 0 = Activate lifeline on power down 1 = Activate lifeline on power down or … |
| 1.3.6.1.4.1.5003.9.10.9.1.1.8.2 | ScalaracTrunkGlobalBChannelAlarms | read-write | current | When set to 1 B-Channels Alarms will be sent. Access: Offline. AC INI-Param: BChannelAlarms |
| 1.3.6.1.4.1.5003.9.10.9.1.2 | NodeacISDNConfig | |||
| 1.3.6.1.4.1.5003.9.10.9.1.2.1 | NodeacMiscISDN | |||
| 1.3.6.1.4.1.5003.9.10.9.1.2.1.1 | ScalaracMiscISDNQ931RelayMode | read-write | current | Activates / de-activates the ISDN level 3 Q.931 Relay Mode. Choose 0 or ActivateLAPDmessaging or Q931_RELAY_TO_HOST or Layer3_IS_IUA. Access: Offline. AC INI-P… |
| 1.3.6.1.4.1.5003.9.10.9.1.2.1.2 | ScalaracMiscISDNDuplicateQ931BuffMode | read-write | obsolete | Access: Offline. AC INI-Param: ISDNDUPLICATEQ931BUFFMODE |
| 1.3.6.1.4.1.5003.9.10.9.1.3 | NodeacDS3Config | |||
| 1.3.6.1.4.1.5003.9.10.9.1.3.1 | ScalaracDS3ConfigFramingMethod | read-write | obsolete | Used to select the physical DS3 framing method to be used in this board. 0 = M23 framing 1 = C Bit Parity. Access: Offline. AC INI-Param: DS3FRAMINGMETHOD |
| 1.3.6.1.4.1.5003.9.10.9.1.3.2 | ScalaracDS3ConfigClockSource | read-write | obsolete | Selects the physical DS3 framing method to be used in this board. Applicable only to the TP-2810. 0 = DS3 Clock is recovered from the line 1 = DS3 trunk clock … |
| 1.3.6.1.4.1.5003.9.10.9.1.3.3 | ScalaracDS3ConfigLineBuiltOut | read-write | obsolete | Used to select the DS3 line build out. Applies only to the TP-2810. Access: Offline. AC INI-Param: DS3LINEBUILTOUT |
| 1.3.6.1.4.1.5003.9.10.9.1.4 | NodeacCasConfig | |||
| 1.3.6.1.4.1.5003.9.10.9.1.4.1 | ScalaracCasConfigEnable | read-write | current | This parameter enables or disables the possibility CAS protocol configuration. At TP6310 When this parameter is enable the conference will disabled in case it'… |
| 1.3.6.1.4.1.5003.9.10.9.1.4.2 | NodeacCASFile | |||
| 1.3.6.1.4.1.5003.9.10.9.1.4.2.1 | TableacCASFileTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.9.1.4.2.1.1 | RowacCASFileEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.9.1.4.2.1.1.1 | ColumnacCASFileIndex | read-only | current | Cas Table Indexd. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.1.4.2.1.1.2 | ColumnacCASFileName | read-only | current | This is a pointer to the CAS filename index (0-7). The index is CASFileName_X. CASFileName_0 through to CASFileName_7 are the path and names of the CAS protoco… |
| 1.3.6.1.4.1.5003.9.10.9.1.5 | NodeacSonetSDH | |||
| 1.3.6.1.4.1.5003.9.10.9.1.5.1 | TableacSonetSDHTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.9.1.5.1.1 | RowacSonetSDHEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.9.1.5.1.1.1 | ColumnacSonetSDHIndex | not-accessible | current | Fiber groupe index. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.1.5.1.1.2 | ColumnacSonetSDHFbrGrpMappingType | read-write | current | Selects SDH/SONET mapping type (signal label + payload mapping type) for the PSTN interface. Generally per Fiber Group. Single Fiber Group supported in the PST… |
| 1.3.6.1.4.1.5003.9.10.9.1.5.1.1.3 | ColumnacSonetSDHFbrGrpKlmNumberingScheme | read-write | current | Provides VC/VT numbering scheme for STM-1/OC3 fiber group. Access: Offline. AC INI-Param: SDHFbrGrp_KLM_Numbering_Scheme |
| 1.3.6.1.4.1.5003.9.10.9.1.5.1.1.4 | ColumnacSonetSDHFbrGrpAPSDirectionMode | read-write | current | Sets the Automatic Protection Switch Unidir/Bidir mode for the Fiber Group. Access: Offline. AC INI-Param: SDHFbrGrp_APS_DirMode |
| 1.3.6.1.4.1.5003.9.10.9.1.5.1.1.5 | ColumnacSonetSDHFbrGrpAPSRevertMode | read-write | current | Sets the Automatic Protection Switch Revertive mode for the Fiber Group. Access: Offline. AC INI-Param: SDHFbrGrp_APS_RevertMode |
| 1.3.6.1.4.1.5003.9.10.9.1.5.1.1.6 | ColumnacSonetSDHFbrGrpAPSWaitToRestoreTime | read-write | current | Sets the APS Wait-to-restore time for the Fiber Group. Access: Offline. AC INI-Param: SDHFbrGrp_APS_WTR |
| 1.3.6.1.4.1.5003.9.10.9.2 | NodeacPSTNStatus | |||
| 1.3.6.1.4.1.5003.9.10.9.2.1 | NodeacTrunkStatus | |||
| 1.3.6.1.4.1.5003.9.10.9.2.1.1 | TableacTrunkStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.9.2.1.1.1 | RowacTrunkStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.9.2.1.1.1.1 | ColumnacTrunkStatusLedStatusColor | read-only | current | Trunk led status color. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.2.1.1.1.2 | ColumnacTrunkStatusLedStatusState | read-only | current | Trunk led status blinking rate. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.2.1.1.1.3 | ColumnacTrunkStatusChannels | read-only | current | Reperesents Trunk's Channels-Status. Each nibble (half Byte) presents one channel status, as following: 1 - invalid B-Channel. 2 - None. 3 - Open. 4 - Media. 5… |
| 1.3.6.1.4.1.5003.9.10.9.2.1.1.1.4 | ColumnacTrunkStatusV5InterfaceNum | read-only | current | V5.2 interface containing this trunk. -1 means information not available or not relevant. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.2.1.1.1.5 | ColumnacTrunkStatusV5LinkID | read-only | current | V5.2 link containing this trunk. -1 means information not available or not relevant. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.2.1.1.1.6 | ColumnacTrunkStatusDChannel | read-only | current | Describes the trunk's D channel status. 0 - dChannelEstablished 1 - dChannelNotEstablished 10 - dChannelNotApplicable. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.2.1.1.1.7 | ColumnacTrunkStatusAlarm | read-only | current | Describes the trunk's alarm status. 0 - Disabled. 1 - Active - OK. 2 - LOS/LOF Alarm. 3 - AIS Alarm. 4 - RAI Alram. 5 - D-Channel Alarm. 6 - Lower Layer Down. … |
| 1.3.6.1.4.1.5003.9.10.9.2.1.1.1.8 | ColumnacTrunkStatusDchannelActivity | read-only | current | Defines D-channel status. This parameter is only applicable to ISDN PRI protocols that support NFAS and/or D-channel backup procedures. 0 = Active channel 1 = … |
| 1.3.6.1.4.1.5003.9.10.9.2.2 | NodeacDigitalLegs | |||
| 1.3.6.1.4.1.5003.9.10.9.2.2.1 | TableacDigitalLegsTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.9.2.2.1.1 | RowacDigitalLegsEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.9.2.2.1.1.1 | ColumnacDigitalLegsLegIndex | not-accessible | current | Decribes The Digital EndPoint In A Call. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.2.2.1.1.2 | ColumnacDigitalLegsCallIndex | read-only | current | Decribes The Call which The Digital EndPoint Participant In It. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.2.2.1.1.3 | ColumnacDigitalLegsTrunk | read-only | current | Describes the Trunk the Leg belong to. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.2.2.1.1.4 | ColumnacDigitalLegsBchannel | read-only | current | Describes the Bchannel the Leg belong to. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.2.2.1.1.5 | ColumnacDigitalLegsEchoCanceller | read-only | current | Enables or Disables the Echo Canceller. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.2.2.1.1.6 | ColumnacDigitalLegsDTMFDetection | read-only | current | Enables or Disables the DTMF Detection. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.2.2.1.1.7 | ColumnacDigitalLegsVoiceVolume | read-only | current | Describs the volume of the voice in dB. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.2.2.1.1.8 | ColumnacDigitalLegsHighPassFilter | read-only | current | Enables or Disables theHigh Pass Filter. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.2.2.1.1.9 | ColumnacDigitalLegsInputGain | read-only | current | Describes the Input Gain on the leg in dB. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.2.2.1.1.10 | ColumnacDigitalLegsDSPDevice | read-only | current | describes the DSP Device the Leg connected to. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.2.2.1.1.11 | ColumnacDigitalLegsLegName | read-only | current | Describes the Leg Name as in the Control Protocol. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.2.3 | NodeacSDHKLMNumberingScheme | |||
| 1.3.6.1.4.1.5003.9.10.9.2.3.1 | TableacSDHKLMNumberingSchemeTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.9.2.3.1.1 | RowacSDHKLMNumberingSchemeEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.9.2.3.1.1.1 | ColumnacSDHKLMNumberingSchemeTrunkIndex | not-accessible | current | Trunk Number. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.2.3.1.1.2 | ColumnacSDHKLMNumberingSchemeTUG3OrSTS1 | read-only | current | AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.2.3.1.1.3 | ColumnacSDHKLMNumberingSchemeTUG2OrVTG | read-only | current | AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.2.3.1.1.4 | ColumnacSDHKLMNumberingSchemeTU12OrVT15 | read-only | current | AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.2.4 | NodeacFiberGroupStatus | |||
| 1.3.6.1.4.1.5003.9.10.9.2.4.1 | ScalaracFiberGroupStatusActiveLink | read-only | current | Fiber group active link number. 0 - there is no active fiber group link. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.2.5 | NodeacNFASGroupStatus | |||
| 1.3.6.1.4.1.5003.9.10.9.2.5.1 | TableacNFASGroupStatusTable | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.9.2.5.1.1 | RowacNFASGroupStatusEntry | not-accessible | current | |
| 1.3.6.1.4.1.5003.9.10.9.2.5.1.1.1 | ColumnacNFASGroupStatusIndex | not-accessible | current | NFAS Group Index. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.2.5.1.1.2 | ColumnacNFASGroupStatusGroupStatus | read-only | current | Describes the status of the NFAS group. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.2.5.1.1.3 | ColumnacNFASGroupStatusPrimaryDChannel | read-only | current | The NFAS Group Configured Primary D-Channel. -1 means no D-channel Configured. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.2.5.1.1.4 | ColumnacNFASGroupStatusBackupDChannel | read-only | current | The NFAS Group Configured Backup D-Channel. -1 means no D-channel Configured. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.2.5.1.1.5 | ColumnacNFASGroupStatusAction | read-write | current | Switches ISDN signaling from active to standby (backup) D-channel of the NFAS Group. Access: Instant. AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.2.5.1.1.6 | ColumnacNFASGroupStatusActionResult | read-only | current | Action result. Includes action status (success, failure or notApplicable). AC INI-Param: N/A |
| 1.3.6.1.4.1.5003.9.10.9.2.5.1.1.7 | ColumnacNFASGroupStatusPrimaryDChannelActivity | read-only | current | Defines Primary D-channel status. This parameter is only applicable to ISDN PRI protocols that support NFAS and/or D-channel backup procedures. 0 = Active chan… |
| 1.3.6.1.4.1.5003.9.10.9.2.5.1.1.8 | ColumnacNFASGroupStatusBackupDChannelActivity | read-only | current | Defines Backup D-channel status. This parameter is only applicable to ISDN PRI protocols that support NFAS and/or D-channel backup procedures. 0 = Active chann… |