ACD-CFM-MIB
382 objects
This MIB is complementary to the IEEE P802.1ag(TM) CFM MIB. It covers the delay measurment and the packet loss configuration and results.
Imported Objects
| ACCEDIAN-SMI | acdMibs |
| Q-BRIDGE-MIB | VlanIdOrNone |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.22420.2.7 | IdentityacdCfm | This MIB is complementary to the IEEE P802.1ag(TM) CFM MIB. It covers the delay measurment and the packet loss configuration and results. | ||
| 1.3.6.1.4.1.22420.2.7.0 | NodeacdCfmNotifications | |||
| 1.3.6.1.4.1.22420.2.7.1 | NodeacdCfmMIBObjects | |||
| 1.3.6.1.4.1.22420.2.7.1.1 | NodeacdCfmDelayMeasurement | |||
| 1.3.6.1.4.1.22420.2.7.1.1.1 | TableacdCfmDmCfgTable | not-accessible | current | Configuration table of all DM entries. |
| 1.3.6.1.4.1.22420.2.7.1.1.1.1 | RowacdCfmDmCfgEntry | not-accessible | current | An entry consisting of all settings to manage a DM instance. |
| 1.3.6.1.4.1.22420.2.7.1.1.1.1.1 | ColumnacdCfmDmCfgID | not-accessible | current | Unique value for each Delay Measurement instance. This value follows the ordering of the results table. |
| 1.3.6.1.4.1.22420.2.7.1.1.1.1.2 | ColumnacdCfmDmCfgRowStatus | read-create | current | All columns must have a valid value before a row can be activated. |
| 1.3.6.1.4.1.22420.2.7.1.1.1.1.3 | ColumnacdCfmDmCfgMepIdx | read-create | current | Maintenance association End Point Identifier. |
| 1.3.6.1.4.1.22420.2.7.1.1.1.1.4 | ColumnacdCfmDmCfgRemoteMepId | read-create | current | Remote Maintenance association End Point Identifier used for this delay measurement configuration. |
| 1.3.6.1.4.1.22420.2.7.1.1.1.1.5 | ColumnacdCfmDmCfgPriority | read-create | current | The VLAN priority. Its value ranges from 0 to 7. |
| 1.3.6.1.4.1.22420.2.7.1.1.1.1.6 | ColumnacdCfmDmCfgEnable | read-create | current | Enable CFM to issues DMM measurement packets. |
| 1.3.6.1.4.1.22420.2.7.1.1.1.1.7 | ColumnacdCfmDmCfgInterval | read-create | current | Interval in milliseconds at which CFM issues DMM measurement packets. |
| 1.3.6.1.4.1.22420.2.7.1.1.1.1.8 | ColumnacdCfmDmCfgRefPeriod | read-create | current | Reference period in minutes for Delay Measurement. |
| 1.3.6.1.4.1.22420.2.7.1.1.1.1.9 | ColumnacdCfmDmCfgOneWayDelayEnable | read-create | current | Enable CFM to compute one-way delay measurements. |
| 1.3.6.1.4.1.22420.2.7.1.1.1.1.10 | ColumnacdCfmDmCfgOneWayDelayMax | read-write | current | Maximum allowed instantaneous delay in milliseconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.1.1.11 | ColumnacdCfmDmCfgOneWayDelayThresh | read-write | current | Number of consecutive delay greater than the maximum allowed value before alert. |
| 1.3.6.1.4.1.22420.2.7.1.1.1.1.12 | ColumnacdCfmDmCfgOneWayAvgDelayThresh | read-write | current | One-way average delay threshold in milliseconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.1.1.13 | ColumnacdCfmDmCfgOneWayDvEnable | read-create | current | Enable CFM to compute one-way delay variation measurements. |
| 1.3.6.1.4.1.22420.2.7.1.1.1.1.14 | ColumnacdCfmDmCfgOneWayDvMax | read-write | current | Maximum allowed instantaneous delay variation in milliseconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.1.1.15 | ColumnacdCfmDmCfgOneWayDvThresh | read-write | current | Number of consecutive delay variation greater than the maximum allowed value before alert. |
| 1.3.6.1.4.1.22420.2.7.1.1.1.1.16 | ColumnacdCfmDmCfgOneWayAvgDvThresh | read-write | current | One-way average delay variation threshold in milliseconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.1.1.17 | ColumnacdCfmDmCfgTwoWayDelayEnable | read-create | current | Enable CFM to compute Two-way delay measurements. |
| 1.3.6.1.4.1.22420.2.7.1.1.1.1.18 | ColumnacdCfmDmCfgTwoWayDelayMax | read-write | current | Maximum allowed instantaneous delay in milliseconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.1.1.19 | ColumnacdCfmDmCfgTwoWayDelayThresh | read-write | current | Number of consecutive delay greater than the maximum allowed value before alert. |
| 1.3.6.1.4.1.22420.2.7.1.1.1.1.20 | ColumnacdCfmDmCfgTwoWayAvgDelayThresh | read-write | current | Two-way average delay threshold in milliseconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.1.1.21 | ColumnacdCfmDmCfgTwoWayDvEnable | read-create | current | Enable CFM to compute Two-way delay variation measurements. |
| 1.3.6.1.4.1.22420.2.7.1.1.1.1.22 | ColumnacdCfmDmCfgTwoWayDvMax | read-write | current | Maximum allowed instantaneous delay variation in milliseconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.1.1.23 | ColumnacdCfmDmCfgTwoWayDvThresh | read-write | current | Number of consecutive delay variation greater than the maximum allowed value before alert. |
| 1.3.6.1.4.1.22420.2.7.1.1.1.1.24 | ColumnacdCfmDmCfgTwoWayAvgDvThresh | read-write | current | Two-way average delay variation threshold in milliseconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.1.1.25 | ColumnacdCfmDmCfgName | read-write | current | A unique name used to identify this instance. The length includes the terminating NULL character. |
| 1.3.6.1.4.1.22420.2.7.1.1.2 | TableacdCfmResultOneWayDelayTable | not-accessible | current | One way delay result table of all DM entries. |
| 1.3.6.1.4.1.22420.2.7.1.1.2.1 | RowacdCfmResultOneWayDelayEntry | not-accessible | current | An entry consisting of One Way Delay results for a DM entry. |
| 1.3.6.1.4.1.22420.2.7.1.1.2.1.1 | ColumnacdCfmResultOneWayDelayID | not-accessible | current | Unique value for each Delay Measurement instance. This value follows the ordering of the Dm table. |
| 1.3.6.1.4.1.22420.2.7.1.1.2.1.2 | ColumnacdCfmResultOneWayDelayPeriodIndex | read-only | current | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 an… |
| 1.3.6.1.4.1.22420.2.7.1.1.2.1.3 | ColumnacdCfmResultOneWayDelayIntervalStart | read-only | current | This is the time of the start of the period. |
| 1.3.6.1.4.1.22420.2.7.1.1.2.1.4 | ColumnacdCfmResultOneWayDelayValid | read-only | current | Indicates the validity of the One-way delay results during this sampling interval. |
| 1.3.6.1.4.1.22420.2.7.1.1.2.1.5 | ColumnacdCfmResultOneWayDelayAlert | read-only | current | Indicate the presence of the One Way Delay alert. |
| 1.3.6.1.4.1.22420.2.7.1.1.2.1.6 | ColumnacdCfmResultOneWayDelayAvgAlert | read-only | current | Indicate the presence of the One Way Average Delay alert. |
| 1.3.6.1.4.1.22420.2.7.1.1.2.1.7 | ColumnacdCfmResultOneWayDelaySamples | read-only | current | Indicates the number of samples gathered during the sampling interval to calculate One-way delay results. |
| 1.3.6.1.4.1.22420.2.7.1.1.2.1.8 | ColumnacdCfmResultOneWayDelayMinValue | read-only | current | Indicates the One-way delay minimum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.2.1.9 | ColumnacdCfmResultOneWayDelayMaxValue | read-only | current | Indicates the One-way delay maximum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.2.1.10 | ColumnacdCfmResultOneWayDelayAvgValue | read-only | current | Indicates the One-way delay average value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.2.1.11 | ColumnacdCfmResultOneWayDelayThreshExc | read-only | current | Indicates the number of samples exceeding the limit. |
| 1.3.6.1.4.1.22420.2.7.1.1.2.1.12 | ColumnacdCfmResultOneWayDelayInstValue | read-only | current | Indicates the One-way delay Instantaneous value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.2.1.13 | ColumnacdCfmResultOneWayDelayName | read-only | current | A unique string used to identify this instance. |
| 1.3.6.1.4.1.22420.2.7.1.1.3 | TableacdCfmResultOneWayDvTable | not-accessible | current | One way delay variation result table of all DM entries. |
| 1.3.6.1.4.1.22420.2.7.1.1.3.1 | RowacdCfmResultOneWayDvEntry | not-accessible | current | An entry consisting of One Way Delay variation results for a DM entry. |
| 1.3.6.1.4.1.22420.2.7.1.1.3.1.1 | ColumnacdCfmResultOneWayDvID | not-accessible | current | Unique value for each Delay variation Measurement instance. This value follows the ordering of the DM table. |
| 1.3.6.1.4.1.22420.2.7.1.1.3.1.2 | ColumnacdCfmResultOneWayDvPeriodIndex | read-only | current | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 an… |
| 1.3.6.1.4.1.22420.2.7.1.1.3.1.3 | ColumnacdCfmResultOneWayDvIntervalStart | read-only | current | This is the time of the start of the period. |
| 1.3.6.1.4.1.22420.2.7.1.1.3.1.4 | ColumnacdCfmResultOneWayDvValid | read-only | current | Indicates the validity of the One-way delay variation results during this sampling interval. |
| 1.3.6.1.4.1.22420.2.7.1.1.3.1.5 | ColumnacdCfmResultOneWayDvAlert | read-only | current | Indicate the presence of the One Way Delay variation alert. |
| 1.3.6.1.4.1.22420.2.7.1.1.3.1.6 | ColumnacdCfmResultOneWayDvAvgAlert | read-only | current | Indicate the presence of the One Way Average Delay variation alert. |
| 1.3.6.1.4.1.22420.2.7.1.1.3.1.7 | ColumnacdCfmResultOneWayDvSamples | read-only | current | Indicates the number of samples gathered during the sampling interval to calculate One-way delay variation results. |
| 1.3.6.1.4.1.22420.2.7.1.1.3.1.8 | ColumnacdCfmResultOneWayDvMinValue | read-only | current | Indicates the One-way delay variation minimum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.3.1.9 | ColumnacdCfmResultOneWayDvMaxValue | read-only | current | Indicates the One-way delay variationmaximum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.3.1.10 | ColumnacdCfmResultOneWayDvAvgValue | read-only | current | Indicates the One-way delay variation average value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.3.1.11 | ColumnacdCfmResultOneWayDvThreshExc | read-only | current | Indicates the number of samples exceeding the limit. |
| 1.3.6.1.4.1.22420.2.7.1.1.3.1.12 | ColumnacdCfmResultOneWayDvInstValue | read-only | current | Indicates the One-way delay variation Instantaneous value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.3.1.13 | ColumnacdCfmResultOneWayDvName | read-only | current | A unique string used to identify this instance. The length includes the terminating NULL character. |
| 1.3.6.1.4.1.22420.2.7.1.1.4 | TableacdCfmResultTwoWayDelayTable | not-accessible | current | Two way delay result table of all DM entries. |
| 1.3.6.1.4.1.22420.2.7.1.1.4.1 | RowacdCfmResultTwoWayDelayEntry | not-accessible | current | An entry consisting of Two Way Delay results for a DM entry. |
| 1.3.6.1.4.1.22420.2.7.1.1.4.1.1 | ColumnacdCfmResultTwoWayDelayID | not-accessible | current | Unique value for each Delay Measurement instance. This value follows the ordering of the Dm table. |
| 1.3.6.1.4.1.22420.2.7.1.1.4.1.2 | ColumnacdCfmResultTwoWayDelayPeriodIndex | read-only | current | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 an… |
| 1.3.6.1.4.1.22420.2.7.1.1.4.1.3 | ColumnacdCfmResultTwoWayDelayIntervalStart | read-only | current | This is the time of the start of the period. |
| 1.3.6.1.4.1.22420.2.7.1.1.4.1.4 | ColumnacdCfmResultTwoWayDelayValid | read-only | current | Indicates the validity of the Two way delay results during this sampling interval. |
| 1.3.6.1.4.1.22420.2.7.1.1.4.1.5 | ColumnacdCfmResultTwoWayDelayAlert | read-only | current | Indicate the presence of the Two Way Delay alert. |
| 1.3.6.1.4.1.22420.2.7.1.1.4.1.6 | ColumnacdCfmResultTwoWayDelayAvgAlert | read-only | current | Indicate the presence of the Two Way Average Delay alert. |
| 1.3.6.1.4.1.22420.2.7.1.1.4.1.7 | ColumnacdCfmResultTwoWayDelaySamples | read-only | current | Indicates the number of samples gathered during the sampling interval to calculate Two-way delay results. |
| 1.3.6.1.4.1.22420.2.7.1.1.4.1.8 | ColumnacdCfmResultTwoWayDelayMinValue | read-only | current | Indicates the Two-way delay minimum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.4.1.9 | ColumnacdCfmResultTwoWayDelayMaxValue | read-only | current | Indicates the Two-way delay maximum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.4.1.10 | ColumnacdCfmResultTwoWayDelayAvgValue | read-only | current | Indicates the Two-way delay average value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.4.1.11 | ColumnacdCfmResultTwoWayDelayThreshExc | read-only | current | Indicates the number of samples exceeding the limit. |
| 1.3.6.1.4.1.22420.2.7.1.1.4.1.12 | ColumnacdCfmResultTwoWayDelayInstValue | read-only | current | Indicates the Two-way delay Instantaneous value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.4.1.13 | ColumnacdCfmResultTwoWayDelayName | read-only | current | A unique string used to identify this instance. The length includes the terminating NULL character. |
| 1.3.6.1.4.1.22420.2.7.1.1.5 | TableacdCfmResultTwoWayDvTable | not-accessible | current | Two way delay variation result table of all DM entries. |
| 1.3.6.1.4.1.22420.2.7.1.1.5.1 | RowacdCfmResultTwoWayDvEntry | not-accessible | current | An entry consisting of One Way Delay variation results for a DM entry. |
| 1.3.6.1.4.1.22420.2.7.1.1.5.1.1 | ColumnacdCfmResultTwoWayDvID | not-accessible | current | Unique value for each Delay variation Measurement instance. This value follows the ordering of the Dm table. |
| 1.3.6.1.4.1.22420.2.7.1.1.5.1.2 | ColumnacdCfmResultTwoWayDvPeriodIndex | read-only | current | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 an… |
| 1.3.6.1.4.1.22420.2.7.1.1.5.1.3 | ColumnacdCfmResultTwoWayDvIntervalStart | read-only | current | This is the time of the start of the period. |
| 1.3.6.1.4.1.22420.2.7.1.1.5.1.4 | ColumnacdCfmResultTwoWayDvValid | read-only | current | Indicates the validity of the two-way delay variation results during this sampling interval. |
| 1.3.6.1.4.1.22420.2.7.1.1.5.1.5 | ColumnacdCfmResultTwoWayDvAlert | read-only | current | Indicate the presence of the Two Way Delay variation alert. |
| 1.3.6.1.4.1.22420.2.7.1.1.5.1.6 | ColumnacdCfmResultTwoWayDvAvgAlert | read-only | current | Indicate the presence of the Two Way Average Delay variation alert. |
| 1.3.6.1.4.1.22420.2.7.1.1.5.1.7 | ColumnacdCfmResultTwoWayDvSamples | read-only | current | Indicates the number of samples gathered during the sampling interval to calculate Two-way delay variation results. |
| 1.3.6.1.4.1.22420.2.7.1.1.5.1.8 | ColumnacdCfmResultTwoWayDvMinValue | read-only | current | Indicates the two-way delay variation minimum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.5.1.9 | ColumnacdCfmResultTwoWayDvMaxValue | read-only | current | Indicates the two-way delay variation maximum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.5.1.10 | ColumnacdCfmResultTwoWayDvAvgValue | read-only | current | Indicates the two-way delay variation average value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.5.1.11 | ColumnacdCfmResultTwoWayDvThreshExc | read-only | current | Indicates the number of samples exceeding the limit. |
| 1.3.6.1.4.1.22420.2.7.1.1.5.1.12 | ColumnacdCfmResultTwoWayDvInstValue | read-only | current | Indicates the two-way delay variation Instantaneous value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.5.1.13 | ColumnacdCfmResultTwoWayDvName | read-only | current | A unique string used to identify this instance. The length includes the terminating NULL character. |
| 1.3.6.1.4.1.22420.2.7.1.1.6 | TableacdCfmHistResultOneWayDelayTable | not-accessible | current | One way delay result table of all DM entries. |
| 1.3.6.1.4.1.22420.2.7.1.1.6.1 | RowacdCfmHistResultOneWayDelayEntry | not-accessible | current | An entry consisting of One Way Delay results for a DM entry. |
| 1.3.6.1.4.1.22420.2.7.1.1.6.1.1 | ColumnacdCfmHistResultOneWayDelayID | read-only | current | Unique value for each Delay Measurement instance. This value follows the ordering of the Dm table. |
| 1.3.6.1.4.1.22420.2.7.1.1.6.1.2 | ColumnacdCfmHistResultOneWayDelaySampleIndex | read-only | current | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 an… |
| 1.3.6.1.4.1.22420.2.7.1.1.6.1.3 | ColumnacdCfmHistResultOneWayDelayStatus | read-only | current | Indicates the validity of the One-way delay results during this sampling interval. |
| 1.3.6.1.4.1.22420.2.7.1.1.6.1.4 | ColumnacdCfmHistResultOneWayDelayDuration | read-only | current | Unique value for each Delay Measurement instance. This value follows the ordering of the Dm table. |
| 1.3.6.1.4.1.22420.2.7.1.1.6.1.5 | ColumnacdCfmHistResultOneWayDelayIntervalEnd | read-only | current | This is the time of the end of the period. |
| 1.3.6.1.4.1.22420.2.7.1.1.6.1.6 | ColumnacdCfmHistResultOneWayDelaySamples | read-only | current | Indicates the number of samples gathered during the sampling interval to calculate One-way delay results. |
| 1.3.6.1.4.1.22420.2.7.1.1.6.1.7 | ColumnacdCfmHistResultOneWayDelayMinValue | read-only | current | Indicates the One-way delay minimum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.6.1.8 | ColumnacdCfmHistResultOneWayDelayMaxValue | read-only | current | Indicates the One-way delay maximum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.6.1.9 | ColumnacdCfmHistResultOneWayDelayAvgValue | read-only | current | Indicates the One-way delay average value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.6.1.10 | ColumnacdCfmHistResultOneWayDelayThreshExc | read-only | current | Indicates the number of samples exceeding the limit. |
| 1.3.6.1.4.1.22420.2.7.1.1.6.1.11 | ColumnacdCfmHistResultOneWayDelayName | read-only | current | A unique name used to identify this instance. The length includes the terminating NULL character. |
| 1.3.6.1.4.1.22420.2.7.1.1.7 | TableacdCfmHistResultOneWayDvTable | not-accessible | current | One way delay variation result table of all DM entries. |
| 1.3.6.1.4.1.22420.2.7.1.1.7.1 | RowacdCfmHistResultOneWayDvEntry | not-accessible | current | An entry consisting of One Way Delay variation results for a DM entry. |
| 1.3.6.1.4.1.22420.2.7.1.1.7.1.1 | ColumnacdCfmHistResultOneWayDvID | read-only | current | Unique value for each Delay variation Measurement instance. This value follows the ordering of the DM table. |
| 1.3.6.1.4.1.22420.2.7.1.1.7.1.2 | ColumnacdCfmHistResultOneWayDvSampleIndex | read-only | current | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 an… |
| 1.3.6.1.4.1.22420.2.7.1.1.7.1.3 | ColumnacdCfmHistResultOneWayDvStatus | read-only | current | Indicates the validity of the One-way delay variation results during this sampling interval. |
| 1.3.6.1.4.1.22420.2.7.1.1.7.1.4 | ColumnacdCfmHistResultOneWayDvDuration | read-only | current | The interval in seconds over which the data is sampled for this entry. |
| 1.3.6.1.4.1.22420.2.7.1.1.7.1.5 | ColumnacdCfmHistResultOneWayDvIntervalEnd | read-only | current | This is the time of the end of the period. |
| 1.3.6.1.4.1.22420.2.7.1.1.7.1.6 | ColumnacdCfmHistResultOneWayDvSamples | read-only | current | Indicates the number of samples gathered during the sampling interval to calculate One-way delay variation results. |
| 1.3.6.1.4.1.22420.2.7.1.1.7.1.7 | ColumnacdCfmHistResultOneWayDvMinValue | read-only | current | Indicates the One-way delay variation minimum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.7.1.8 | ColumnacdCfmHistResultOneWayDvMaxValue | read-only | current | Indicates the One-way delay variationmaximum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.7.1.9 | ColumnacdCfmHistResultOneWayDvAvgValue | read-only | current | Indicates the One-way delay variation average value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.7.1.10 | ColumnacdCfmHistResultOneWayDvThreshExc | read-only | current | Indicates the number of samples exceeding the limit. |
| 1.3.6.1.4.1.22420.2.7.1.1.7.1.11 | ColumnacdCfmHistResultOneWayDvName | read-only | current | A unique name used to identify this instance. The length includes the terminating NULL character. |
| 1.3.6.1.4.1.22420.2.7.1.1.8 | TableacdCfmHistResultTwoWayDelayTable | not-accessible | current | Two way delay result table of all DM entries. |
| 1.3.6.1.4.1.22420.2.7.1.1.8.1 | RowacdCfmHistResultTwoWayDelayEntry | not-accessible | current | An entry consisting of Two Way Delay results for a DM entry. |
| 1.3.6.1.4.1.22420.2.7.1.1.8.1.1 | ColumnacdCfmHistResultTwoWayDelayID | read-only | current | Unique value for each Delay Measurement instance. This value follows the ordering of the Dm table. |
| 1.3.6.1.4.1.22420.2.7.1.1.8.1.2 | ColumnacdCfmHistResultTwoWayDelaySampleIndex | read-only | current | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 an… |
| 1.3.6.1.4.1.22420.2.7.1.1.8.1.3 | ColumnacdCfmHistResultTwoWayDelayStatus | read-only | current | Indicates the validity of the Two way delay results during this sampling interval. |
| 1.3.6.1.4.1.22420.2.7.1.1.8.1.4 | ColumnacdCfmHistResultTwoWayDelayDuration | read-only | current | The interval in seconds over which the data is sampled for this entry. |
| 1.3.6.1.4.1.22420.2.7.1.1.8.1.5 | ColumnacdCfmHistResultTwoWayDelayIntervalEnd | read-only | current | This is the time of the end of the period. |
| 1.3.6.1.4.1.22420.2.7.1.1.8.1.6 | ColumnacdCfmHistResultTwoWayDelaySamples | read-only | current | Indicates the number of samples gathered during the sampling interval to calculate Two-way delay results. |
| 1.3.6.1.4.1.22420.2.7.1.1.8.1.7 | ColumnacdCfmHistResultTwoWayDelayMinValue | read-only | current | Indicates the Two-way delay minimum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.8.1.8 | ColumnacdCfmHistResultTwoWayDelayMaxValue | read-only | current | Indicates the Two-way delay maximum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.8.1.9 | ColumnacdCfmHistResultTwoWayDelayAvgValue | read-only | current | Indicates the Two-way delay average value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.8.1.10 | ColumnacdCfmHistResultTwoWayDelayThreshExc | read-only | current | Indicates the number of samples exceeding the limit. |
| 1.3.6.1.4.1.22420.2.7.1.1.8.1.11 | ColumnacdCfmHistResultTwoWayDelayName | read-only | current | A unique name used to identify this instance. The length includes the terminating NULL character. |
| 1.3.6.1.4.1.22420.2.7.1.1.9 | TableacdCfmHistResultTwoWayDvTable | not-accessible | current | Two way delay variation result table of all DM entries. |
| 1.3.6.1.4.1.22420.2.7.1.1.9.1 | RowacdCfmHistResultTwoWayDvEntry | not-accessible | current | An entry consisting of two Way Delay variation results for a DM entry. |
| 1.3.6.1.4.1.22420.2.7.1.1.9.1.1 | ColumnacdCfmHistResultTwoWayDvID | read-only | current | Unique value for each Delay variation Measurement instance. This value follows the ordering of the Dm table. |
| 1.3.6.1.4.1.22420.2.7.1.1.9.1.2 | ColumnacdCfmHistResultTwoWayDvSampleIndex | read-only | current | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same DM instance. This index starts at 1 an… |
| 1.3.6.1.4.1.22420.2.7.1.1.9.1.3 | ColumnacdCfmHistResultTwoWayDvStatus | read-only | current | Indicates the validity of the two-way delay variation results during this sampling interval. |
| 1.3.6.1.4.1.22420.2.7.1.1.9.1.4 | ColumnacdCfmHistResultTwoWayDvDuration | read-only | current | The interval in seconds over which the data is sampled for this entry. |
| 1.3.6.1.4.1.22420.2.7.1.1.9.1.5 | ColumnacdCfmHistResultTwoWayDvIntervalEnd | read-only | current | This is the time of the end of the period. |
| 1.3.6.1.4.1.22420.2.7.1.1.9.1.6 | ColumnacdCfmHistResultTwoWayDvSamples | read-only | current | Indicates the number of samples gathered during the sampling interval to calculate Two-way delay variation results. |
| 1.3.6.1.4.1.22420.2.7.1.1.9.1.7 | ColumnacdCfmHistResultTwoWayDvMinValue | read-only | current | Indicates the two-way delay variation minimum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.9.1.8 | ColumnacdCfmHistResultTwoWayDvMaxValue | read-only | current | Indicates the two-way delay variation maximum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.9.1.9 | ColumnacdCfmHistResultTwoWayDvAvgValue | read-only | current | Indicates the two-way delay variation average value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.7.1.1.9.1.10 | ColumnacdCfmHistResultTwoWayDvThreshExc | read-only | current | Indicates the number of samples exceeding the limit. |
| 1.3.6.1.4.1.22420.2.7.1.1.9.1.11 | ColumnacdCfmHistResultTwoWayDvName | read-only | current | A unique name used to identify this instance. The length includes the terminating NULL character. |
| 1.3.6.1.4.1.22420.2.7.1.2 | NodeacdCfmPacketLoss | |||
| 1.3.6.1.4.1.22420.2.7.1.2.1 | TableacdCfmPktLossCfgTable | not-accessible | current | Configuration table of all Packet Loss entries. |
| 1.3.6.1.4.1.22420.2.7.1.2.1.1 | RowacdCfmPktLossCfgEntry | not-accessible | current | An entry consisting of all settings to manage a Packet loss instance. |
| 1.3.6.1.4.1.22420.2.7.1.2.1.1.1 | ColumnacdCfmPktLossCfgID | not-accessible | current | Unique value for each Packet Loss instance. This value follows the ordering the results table. |
| 1.3.6.1.4.1.22420.2.7.1.2.1.1.2 | ColumnacdCfmPktLossCfgRowStatus | read-create | current | The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. |
| 1.3.6.1.4.1.22420.2.7.1.2.1.1.3 | ColumnacdCfmPktLossCfgMepIdx | read-create | current | Maintenance association End Point Identifier. |
| 1.3.6.1.4.1.22420.2.7.1.2.1.1.4 | ColumnacdCfmPktLossCfgRemoteMepId | read-create | current | Remote Maintenance association End Point Identifier. |
| 1.3.6.1.4.1.22420.2.7.1.2.1.1.5 | ColumnacdCfmPktLossCfgPriority | read-create | current | The VLAN priority. Its value ranges from 0 to 7. Same has CCM priority for packet loss based on CCM. |
| 1.3.6.1.4.1.22420.2.7.1.2.1.1.6 | ColumnacdCfmPktLossCfgEnable | read-create | current | Enable CFM to perform Packet Loss measurement. |
| 1.3.6.1.4.1.22420.2.7.1.2.1.1.7 | ColumnacdCfmPktLossCfgInterval | read-create | current | Interval in milliseconds at which CFM issues Packet Loss measurement packets. Same has CCM interval for packet loss based on CCM. |
| 1.3.6.1.4.1.22420.2.7.1.2.1.1.8 | ColumnacdCfmPktLossCfgRefPeriod | read-create | current | Reference period in minutes for Packet Loss Measurement. |
| 1.3.6.1.4.1.22420.2.7.1.2.1.1.9 | ColumnacdCfmPktLossCfgThresh | read-write | current | Maximum number of packet loss allowed without issuing an alarm. |
| 1.3.6.1.4.1.22420.2.7.1.2.1.1.10 | ColumnacdCfmPktLossCfgRatioThresh | read-write | current | Packet loss ratio threshold allowed without issuing an alarm expressed in millionth of percent (1,000,000 is 1%). |
| 1.3.6.1.4.1.22420.2.7.1.2.1.1.11 | ColumnacdCfmPktLossCfgName | read-write | current | Unique string for each Packet Loss instance. The length includes the terminating NULL character. |
| 1.3.6.1.4.1.22420.2.7.1.2.2 | TableacdCfmResultPktLossTable | not-accessible | current | Packet loss result table of a MEP and remote MEP pair. |
| 1.3.6.1.4.1.22420.2.7.1.2.2.1 | RowacdCfmResultPktLossEntry | not-accessible | current | An entry consisting of packet loss result for a specific MEP and remote MEP pair. |
| 1.3.6.1.4.1.22420.2.7.1.2.2.1.1 | ColumnacdCfmResultPktLossID | not-accessible | current | Unique value for each Delay variation Measurement instance. This value follows the ordering of the Dm table. |
| 1.3.6.1.4.1.22420.2.7.1.2.2.1.2 | ColumnacdCfmResultPktLossPeriodIndex | read-only | current | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same PL instance. This index starts at 1 an… |
| 1.3.6.1.4.1.22420.2.7.1.2.2.1.3 | ColumnacdCfmResultPktLossIntervalStart | read-only | current | This is the time of the start of the period. |
| 1.3.6.1.4.1.22420.2.7.1.2.2.1.4 | ColumnacdCfmResultPktLossValid | read-only | current | Indicates the validity of the packet loss results during this sampling interval. |
| 1.3.6.1.4.1.22420.2.7.1.2.2.1.5 | ColumnacdCfmResultPktLossAlert | read-only | current | Indicate the presence of the Packet Loss alert. |
| 1.3.6.1.4.1.22420.2.7.1.2.2.1.6 | ColumnacdCfmResultPktLossSamples | read-only | current | Indicates the number of samples gathered during the sampling interval to calculate packet loss results. |
| 1.3.6.1.4.1.22420.2.7.1.2.2.1.7 | ColumnacdCfmResultPktLossOverflowSamples | read-only | current | The number of times the associated acdCfmResultPktLossSamples counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with ac… |
| 1.3.6.1.4.1.22420.2.7.1.2.2.1.8 | ColumnacdCfmResultPktLossHCSamples | read-only | current | Indicates the number of samples gathered during the sampling interval to calculate packet loss results. |
| 1.3.6.1.4.1.22420.2.7.1.2.2.1.9 | ColumnacdCfmResultPktLossNbrLoss | read-only | current | This is the number of packet loss. |
| 1.3.6.1.4.1.22420.2.7.1.2.2.1.10 | ColumnacdCfmResultPktLossOverflowNbrLoss | read-only | current | The number of times the associated acdCfmResultPktLossNbrLoss counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with ac… |
| 1.3.6.1.4.1.22420.2.7.1.2.2.1.11 | ColumnacdCfmResultPktLossHCNbrLoss | read-only | current | This is the number of packet loss. |
| 1.3.6.1.4.1.22420.2.7.1.2.2.1.12 | ColumnacdCfmResultPktLossNbrGaps | read-only | current | This is the number of gap. |
| 1.3.6.1.4.1.22420.2.7.1.2.2.1.13 | ColumnacdCfmResultPktLossOverflowNbrGaps | read-only | current | The number of times the associated acdCfmResultPktLossNbrGaps counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with ac… |
| 1.3.6.1.4.1.22420.2.7.1.2.2.1.14 | ColumnacdCfmResultPktLossHCNbrGaps | read-only | current | This is the number of gap. |
| 1.3.6.1.4.1.22420.2.7.1.2.2.1.15 | ColumnacdCfmResultPktLossLargestGap | read-only | current | the largest gap size in packets. |
| 1.3.6.1.4.1.22420.2.7.1.2.2.1.16 | ColumnacdCfmResultPktLossOverflowLargestGap | read-only | current | The number of times the associated acdCfmResultPktLossLargestGap counter has overflowed during this sampling interval. This is a 32 bits counter. Combined with… |
| 1.3.6.1.4.1.22420.2.7.1.2.2.1.17 | ColumnacdCfmResultPktLossHCLargestGap | read-only | current | the largest gap size in packets. |
| 1.3.6.1.4.1.22420.2.7.1.2.2.1.18 | ColumnacdCfmResultPktLossRatio | read-only | current | Indicates the packet loss ratio. The packet loss ratio is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%). |
| 1.3.6.1.4.1.22420.2.7.1.2.2.1.19 | ColumnacdCfmResultPktLossName | read-only | current | Unique string for each Packet Loss instance. The length includes the terminating NULL character. |
| 1.3.6.1.4.1.22420.2.7.1.2.3 | TableacdCfmHistResultPktLossTable | not-accessible | current | Packet loss history result table of a MEP and remote MEP pair. |
| 1.3.6.1.4.1.22420.2.7.1.2.3.1 | RowacdCfmHistResultPktLossEntry | not-accessible | current | An entry consisting of Packet loss history result for a specific MEP and remote MEP pair. |
| 1.3.6.1.4.1.22420.2.7.1.2.3.1.1 | ColumnacdCfmHistResultPktLossID | read-only | current | Unique value for each Delay variation Measurement instance. This value follows the ordering of the Dm table. |
| 1.3.6.1.4.1.22420.2.7.1.2.3.1.2 | ColumnacdCfmHistResultPktLossSampleIndex | read-only | current | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same PL instance. This index starts at 1 an… |
| 1.3.6.1.4.1.22420.2.7.1.2.3.1.3 | ColumnacdCfmHistResultPktLossStatus | read-only | current | Indicates the validity of the packet loss results during this sampling interval. |
| 1.3.6.1.4.1.22420.2.7.1.2.3.1.4 | ColumnacdCfmHistResultPktLossDuration | read-only | current | The interval in seconds over which the data is sampled for this entry. |
| 1.3.6.1.4.1.22420.2.7.1.2.3.1.5 | ColumnacdCfmHistResultPktLossIntervalEnd | read-only | current | This is the time of the end of this entry. |
| 1.3.6.1.4.1.22420.2.7.1.2.3.1.6 | ColumnacdCfmHistResultPktLossSamples | read-only | current | Indicates the number of samples gathered during the sampling interval to calculate packet loss results. This is a 32 bits counter. Combined with the overflow c… |
| 1.3.6.1.4.1.22420.2.7.1.2.3.1.7 | ColumnacdCfmHistResultPktLossOverflowSamples | read-only | current | The number of times the associated acdCfmHistResultPktLossSamples counter has overflowed during this sampling interval. This is a 32 bits counter. Combined wit… |
| 1.3.6.1.4.1.22420.2.7.1.2.3.1.8 | ColumnacdCfmHistResultPktLossHCSamples | read-only | current | Indicates the number of samples gathered during the sampling interval to calculate packet loss results. |
| 1.3.6.1.4.1.22420.2.7.1.2.3.1.9 | ColumnacdCfmHistResultPktLossNbrLoss | read-only | current | The total number of packets loss during this sampling interval. This is a 32 bits counter. Combined with the overflow counter it provides the equivalent of the… |
| 1.3.6.1.4.1.22420.2.7.1.2.3.1.10 | ColumnacdCfmHistResultPktLossOverflowNbrLoss | read-only | current | The number of times the associated acdCfmHistResultPktLossNbrLoss counter has overflowed during this sampling interval. This is a 32 bits counter. Combined wit… |
| 1.3.6.1.4.1.22420.2.7.1.2.3.1.11 | ColumnacdCfmHistResultPktLossHCNbrLoss | read-only | current | The total number of packets loss during this sampling interval. |
| 1.3.6.1.4.1.22420.2.7.1.2.3.1.12 | ColumnacdCfmHistResultPktLossNbrGaps | read-only | current | The total number of gap during this sampling interval. This is a 32 bits counter. Combined with the overflow counter it provides the equivalent of the 64 bits … |
| 1.3.6.1.4.1.22420.2.7.1.2.3.1.13 | ColumnacdCfmHistResultPktLossOverflowNbrGaps | read-only | current | The number of times the associated acdCfmHistResultPktLossNbrGaps counter has overflowed during this sampling interval. This is a 32 bits counter. Combined wit… |
| 1.3.6.1.4.1.22420.2.7.1.2.3.1.14 | ColumnacdCfmHistResultPktLossHCNbrGaps | read-only | current | The total number of gap during this sampling interval. |
| 1.3.6.1.4.1.22420.2.7.1.2.3.1.15 | ColumnacdCfmHistResultPktLossLargestGap | read-only | current | the largest gap size in packets during this sampling interval. This is a 32 bits counter. Combined with the overflow counter it provides the equivalent of the … |
| 1.3.6.1.4.1.22420.2.7.1.2.3.1.16 | ColumnacdCfmHistResultPktLossOverflowLargestGap | read-only | current | The number of times the associated acdCfmHistResultPktLossLargestGap counter has overflowed during this sampling interval. This is a 32 bits counter. Combined … |
| 1.3.6.1.4.1.22420.2.7.1.2.3.1.17 | ColumnacdCfmHistResultPktLossHCLargestGap | read-only | current | the largest gap size in packets during this sampling interval. |
| 1.3.6.1.4.1.22420.2.7.1.2.3.1.18 | ColumnacdCfmHistResultPktLossRatio | read-only | current | Indicates the packet loss ratio. The packet loss ratio is the percent of packets transmitted but not received in millionth of a percent (1,000,000 is 1%). |
| 1.3.6.1.4.1.22420.2.7.1.2.3.1.19 | ColumnacdCfmHistResultPktLossName | read-only | current | A unique name used to identify this instance. The length includes the terminating NULL character. |
| 1.3.6.1.4.1.22420.2.7.1.3 | NodeacdCfmMep | |||
| 1.3.6.1.4.1.22420.2.7.1.3.2 | TableacdCfmMepStatsTxTable | not-accessible | current | Transmit Statictics table of all MEP entries. |
| 1.3.6.1.4.1.22420.2.7.1.3.2.1 | RowacdCfmMepStatsTxEntry | not-accessible | current | An entry consisting of all transmit statistics related to a MEP entry. |
| 1.3.6.1.4.1.22420.2.7.1.3.2.1.1 | ColumnacdCfmMepStatsTxID | not-accessible | current | Unique value for each MEP instance. This value follows the ordering of the MEP table. |
| 1.3.6.1.4.1.22420.2.7.1.3.2.1.2 | ColumnacdCfmMepStatsTxCcmPdu | read-only | current | This is a count of the total number of Continuity Check Message (CCM) PDU transmitted by the MEP (OpCode 1). |
| 1.3.6.1.4.1.22420.2.7.1.3.2.1.3 | ColumnacdCfmMepStatsTxLbmPdu | read-only | current | This is a count of the total number of LoopBack Message (LBM) PDU transmitted by the MEP (OpCode 3). |
| 1.3.6.1.4.1.22420.2.7.1.3.2.1.4 | ColumnacdCfmMepStatsTxLbrPdu | read-only | current | This is a count of the total number of LoopBack Reply (LBR) PDU transmitted by the MEP (OpCode 2). |
| 1.3.6.1.4.1.22420.2.7.1.3.2.1.5 | ColumnacdCfmMepStatsTxLtmPdu | read-only | current | This is a count of the total number of Link Trace Message (LTM) PDU transmitted by the MEP (OpCode 5). |
| 1.3.6.1.4.1.22420.2.7.1.3.2.1.6 | ColumnacdCfmMepStatsTxLtrPdu | read-only | current | This is a count of the total number of Link Trace Reply (LTR) PDU transmitted by the MEP (OpCode 4). |
| 1.3.6.1.4.1.22420.2.7.1.3.2.1.7 | ColumnacdCfmMepStatsTxAisPdu | read-only | current | This is a count of the total number of Alarm Indication Signal (AIS) PDU transmitted by the MEP (OpCode 33). |
| 1.3.6.1.4.1.22420.2.7.1.3.2.1.8 | ColumnacdCfmMepStatsTxLckPdu | read-only | current | This is a count of the total number of Locked (LCK) PDU transmitted by the MEP (OpCode 35). |
| 1.3.6.1.4.1.22420.2.7.1.3.2.1.9 | ColumnacdCfmMepStatsTxTstPdu | read-only | current | This is a count of the total number of Test (TST) PDU transmitted by the MEP (OpCode 37). |
| 1.3.6.1.4.1.22420.2.7.1.3.2.1.10 | ColumnacdCfmMepStatsTxLinearApsPdu | read-only | current | This is a count of the total number of linear Automatic Protection Switching (APS) PDU transmitted by the MEP (OpCode 39). |
| 1.3.6.1.4.1.22420.2.7.1.3.2.1.11 | ColumnacdCfmMepStatsTxRingApsPdu | read-only | current | This is a count of the total number of ring Automatic Protection Switching (APS) PDU transmitted by the MEP (OpCode 40). |
| 1.3.6.1.4.1.22420.2.7.1.3.2.1.12 | ColumnacdCfmMepStatsTxMccPdu | read-only | current | This is a count of the total number of Maintenance Communication Channel (MCC) PDU transmitted by the MEP (OpCode 41). |
| 1.3.6.1.4.1.22420.2.7.1.3.2.1.13 | ColumnacdCfmMepStatsTxLmmPdu | read-only | current | This is a count of the total number of Loss Measurement Message (LMM) PDU transmitted by the MEP (OpCode 43). |
| 1.3.6.1.4.1.22420.2.7.1.3.2.1.14 | ColumnacdCfmMepStatsTxLmrPdu | read-only | current | This is a count of the total number of Loss Measurement Reply (LMR) PDU transmitted by the MEP (OpCode 42). |
| 1.3.6.1.4.1.22420.2.7.1.3.2.1.15 | ColumnacdCfmMepStatsTx1dmPdu | read-only | current | This is a count of the total number of One-way Delay Measurement (1DM) PDU transmitted by the MEP (OpCode 45). |
| 1.3.6.1.4.1.22420.2.7.1.3.2.1.16 | ColumnacdCfmMepStatsTxDmmPdu | read-only | current | This is a count of the total number of Delay Measurement Message (DMM) PDU transmitted by the MEP (OpCode 47). |
| 1.3.6.1.4.1.22420.2.7.1.3.2.1.17 | ColumnacdCfmMepStatsTxDmrPdu | read-only | current | This is a count of the total number of Delay Measurement Reply (DMR) PDU transmitted by the MEP (OpCode 46). |
| 1.3.6.1.4.1.22420.2.7.1.3.2.1.18 | ColumnacdCfmMepStatsTxExmPdu | read-only | current | This is a count of the total number of EXperimental Message (EXM) PDU transmitted by the MEP (OpCode 49). |
| 1.3.6.1.4.1.22420.2.7.1.3.2.1.19 | ColumnacdCfmMepStatsTxExrPdu | read-only | current | This is a count of the total number of EXperimental Reply (EXR) PDU transmitted by the MEP (OpCode 48). |
| 1.3.6.1.4.1.22420.2.7.1.3.2.1.20 | ColumnacdCfmMepStatsTxVsmPdu | read-only | current | This is a count of the total number of Vendor Specific Message (VSM) PDU transmitted by the MEP (OpCode 51). |
| 1.3.6.1.4.1.22420.2.7.1.3.2.1.21 | ColumnacdCfmMepStatsTxVsrPdu | read-only | current | This is a count of the total number of Vendor Specific Reply (VSR) PDU transmitted by the MEP (OpCode 50). |
| 1.3.6.1.4.1.22420.2.7.1.3.2.1.22 | ColumnacdCfmMepStatsTxCsfPdu | read-only | current | This is a count of the total number of Client Signal Fail (CSF) PDU transmitted by the MEP (OpCode 52). |
| 1.3.6.1.4.1.22420.2.7.1.3.2.1.23 | ColumnacdCfmMepStatsTxSlmPdu | read-only | current | This is a count of the total number of Synthetic Loss Message (SLM) PDU transmitted by the MEP (OpCode 55). |
| 1.3.6.1.4.1.22420.2.7.1.3.2.1.24 | ColumnacdCfmMepStatsTxSlrPdu | read-only | current | This is a count of the total number of Synthetic Loss Reply (SLR) PDU transmitted by the MEP (OpCode 54). |
| 1.3.6.1.4.1.22420.2.7.1.3.2.1.25 | ColumnacdCfmMepStatsTxName | read-only | current | Unique string for each Mep instance. The length includes the terminating NULL character. This is a duplicate of acdCfmMepCfgName |
| 1.3.6.1.4.1.22420.2.7.1.3.3 | TableacdCfmMepStatsRxTable | not-accessible | current | Receive Statictics table of all MEP entries. |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1 | RowacdCfmMepStatsRxEntry | not-accessible | current | An entry consisting of all receive statistics related to a MEP entry. |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.1 | ColumnacdCfmMepStatsRxID | not-accessible | current | . |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.2 | ColumnacdCfmMepStatsRxCcmPdu | read-only | current | This is a count of the total number of Continuity Check Message (CCM) PDU received by the MEP (OpCode 1). |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.3 | ColumnacdCfmMepStatsRxLbmPdu | read-only | current | This is a count of the total number of LoopBack Message (LBM) PDU received by the MEP (OpCode 3). |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.4 | ColumnacdCfmMepStatsRxLbrPdu | read-only | current | This is a count of the total number of LoopBack Reply (LBR) PDU received by the MEP (OpCode 2). |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.5 | ColumnacdCfmMepStatsRxLtmPdu | read-only | current | This is a count of the total number of Link Trace Message (LTM) PDU received by the MEP (OpCode 5). |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.6 | ColumnacdCfmMepStatsRxLtrPdu | read-only | current | This is a count of the total number of Link Trace Reply (LTR) PDU received by the MEP (OpCode 4). |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.7 | ColumnacdCfmMepStatsRxAisPdu | read-only | current | This is a count of the total number of Alarm Indication Signal (AIS) PDU received by the MEP (OpCode 33). |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.8 | ColumnacdCfmMepStatsRxLckPdu | read-only | current | This is a count of the total number of Locked (LCK) PDU received by the MEP (OpCode 35). |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.9 | ColumnacdCfmMepStatsRxTstPdu | read-only | current | This is a count of the total number of Test (TST) PDU received by the MEP (OpCode 37). |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.10 | ColumnacdCfmMepStatsRxLinearApsPdu | read-only | current | This is a count of the total number of linear Automatic Protection Switching (APS) PDU received by the MEP (OpCode 39). |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.11 | ColumnacdCfmMepStatsRxRingApsPdu | read-only | current | This is a count of the total number of ring Automatic Protection Switching (APS) PDU received by the MEP (OpCode 40). |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.12 | ColumnacdCfmMepStatsRxMccPdu | read-only | current | This is a count of the total number of Maintenance Communication Channel (MCC) PDU received by the MEP (OpCode 41). |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.13 | ColumnacdCfmMepStatsRxLmmPdu | read-only | current | This is a count of the total number of Loss Measurement Message (LMM) PDU received by the MEP (OpCode 43). |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.14 | ColumnacdCfmMepStatsRxLmrPdu | read-only | current | This is a count of the total number of Loss Measurement Reply (LMR) PDU received by the MEP (OpCode 42). |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.15 | ColumnacdCfmMepStatsRx1dmPdu | read-only | current | This is a count of the total number of One-way Delay Measurement (1DM) PDU received by the MEP (OpCode 45). |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.16 | ColumnacdCfmMepStatsRxDmmPdu | read-only | current | This is a count of the total number of Delay Measurement Message (DMM) PDU received by the MEP (OpCode 47). |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.17 | ColumnacdCfmMepStatsRxDmrPdu | read-only | current | This is a count of the total number of Delay Measurement Reply (DMR) PDU received by the MEP (OpCode 46). |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.18 | ColumnacdCfmMepStatsRxExmPdu | read-only | current | This is a count of the total number of EXperimental Message (EXM) PDU received by the MEP (OpCode 49). |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.19 | ColumnacdCfmMepStatsRxExrPdu | read-only | current | This is a count of the total number of EXperimental Reply (EXR) PDU received by the MEP (OpCode 48). |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.20 | ColumnacdCfmMepStatsRxVsmPdu | read-only | current | This is a count of the total number of Vendor Specific Message (VSM) PDU received by the MEP (OpCode 51). |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.21 | ColumnacdCfmMepStatsRxVsrPdu | read-only | current | This is a count of the total number of Vendor Specific Reply (VSR) PDU received by the MEP (OpCode 50). |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.22 | ColumnacdCfmMepStatsRxCcmSeqErrors | read-only | current | The total number of out-of-sequence CCMs received from all remote MEPs. |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.23 | ColumnacdCfmMepStatsRxLtrUnexpectedPdu | read-only | current | The total number of LTRs received when no linktrace request is active for that MEP. |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.24 | ColumnacdCfmMepStatsRxLtrMacErrors | read-only | current | The total number of Link Trace Replies dropped because of bad MAC address. |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.25 | ColumnacdCfmMepStatsRxLbrOooErrors | read-only | current | The total number of valid, out-of-order Loopback Replies received. |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.26 | ColumnacdCfmMepStatsRxLbrUnexpectedPdu | read-only | current | The total number of LBRs received when no loopback request is active for that MEP. |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.27 | ColumnacdCfmMepStatsRxLbrDataErrors | read-only | current | The total number of LBRs received whose MACService Data Unit did not match (except for the OpCode) that of the corresponding LBM. |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.28 | ColumnacdCfmMepStatsRxCsfPdu | read-only | current | This is a count of the total number of Client Signal Fail (CSF) PDU received by the MEP (OpCode 52). |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.29 | ColumnacdCfmMepStatsRxSlmPdu | read-only | current | This is a count of the total number of Synthetic Loss Message (SLM) PDU received by the MEP (OpCode 55). |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.30 | ColumnacdCfmMepStatsRxSlrPdu | read-only | current | This is a count of the total number of Synthetic Loss Reply (SLR) PDU received by the MEP (OpCode 54). |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.31 | ColumnacdCfmMepStatsRxCsfInvalidFlags | read-only | current | This is a count of the total number of ETH-CSF PDUs received with invalid flags. |
| 1.3.6.1.4.1.22420.2.7.1.3.3.1.32 | ColumnacdCfmMepStatsRxName | read-only | current | Unique string for each Mep instance. The length includes the terminating NULL character. This is a duplicate of acdCfmMepCfgName |
| 1.3.6.1.4.1.22420.2.7.1.3.4 | TableacdCfmMepDmStatsTable | not-accessible | current | Transmit DMM/DMR statictics per priority table for a MEP entry. |
| 1.3.6.1.4.1.22420.2.7.1.3.4.1 | RowacdCfmMepDmStatsEntry | not-accessible | current | An entry consisting of all DMM/DMR statistics related to a MEP entry. |
| 1.3.6.1.4.1.22420.2.7.1.3.4.1.1 | ColumnacdCfmMepDmStatsID | not-accessible | current | Unique value for each MEP instance. This value follows the ordering of the MEP table. Same as acdCfmMepStatsTxID and acdCfmMepStatsRxID. |
| 1.3.6.1.4.1.22420.2.7.1.3.4.1.2 | ColumnacdCfmMepDmStatsPriority | not-accessible | current | Unique value for each priority level. |
| 1.3.6.1.4.1.22420.2.7.1.3.4.1.3 | ColumnacdCfmMepDmStatsTxDmmPdu | read-only | current | This is a count of the total number of Delay Measurement Message (DMM) (OpCode 47) PDU transmitted by the MEP for this specific priority level. |
| 1.3.6.1.4.1.22420.2.7.1.3.4.1.4 | ColumnacdCfmMepDmStatsRxDmmPdu | read-only | current | This is a count of the total number of Delay Measurement Message (DMM) (OpCode 47) PDU received by the MEP for this specific priority level. |
| 1.3.6.1.4.1.22420.2.7.1.3.4.1.5 | ColumnacdCfmMepDmStatsTxDmrPdu | read-only | current | This is a count of the total number of Delay Measurement Reply (DMR) (OpCode 46) PDU transmitted by the MEP for this specific priority level. |
| 1.3.6.1.4.1.22420.2.7.1.3.4.1.6 | ColumnacdCfmMepDmStatsRxDmrPdu | read-only | current | This is a count of the total number of Delay Measurement Reply (DMR) (OpCode 46) PDU received by the MEP for this specific priority level. |
| 1.3.6.1.4.1.22420.2.7.1.3.4.1.7 | ColumnacdCfmMepDmStatsName | read-only | current | Unique string for each Mep instance. The length includes the terminating NULL character. This is a duplicate of acdCfmMepCfgName |
| 1.3.6.1.4.1.22420.2.7.1.3.5 | TableacdCfmMepCfgTable | not-accessible | current | Configuration table of all MEP entries. |
| 1.3.6.1.4.1.22420.2.7.1.3.5.1 | RowacdCfmMepCfgEntry | not-accessible | current | An entry consisting of all settings to manage a MEP instance. |
| 1.3.6.1.4.1.22420.2.7.1.3.5.1.1 | ColumnacdCfmMepCfgIdx | not-accessible | current | Unique value for each MEP instance. This value follows the ordering the status table. |
| 1.3.6.1.4.1.22420.2.7.1.3.5.1.2 | ColumnacdCfmMepCfgRowStatus | read-create | current | The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. |
| 1.3.6.1.4.1.22420.2.7.1.3.5.1.3 | ColumnacdCfmMepCfgMdIdx | read-only | current | Maintenance Domain instance index. |
| 1.3.6.1.4.1.22420.2.7.1.3.5.1.4 | ColumnacdCfmMepCfgMaIdx | read-create | current | Maintenance Association instance index. |
| 1.3.6.1.4.1.22420.2.7.1.3.5.1.5 | ColumnacdCfmMepCfgMepId | read-create | current | Maintenance association End Point Identifier. |
| 1.3.6.1.4.1.22420.2.7.1.3.5.1.6 | ColumnacdCfmMepCfgName | read-write | current | Unique string for each Mep instance. The length includes the terminating NULL character. |
| 1.3.6.1.4.1.22420.2.7.1.3.5.1.7 | ColumnacdCfmMepCfgPortId | read-create | current | The Port Identifier. |
| 1.3.6.1.4.1.22420.2.7.1.3.5.1.8 | ColumnacdCfmMepCfgPortIdMacAddr | read-only | current | MAC Address of the port. |
| 1.3.6.1.4.1.22420.2.7.1.3.5.1.9 | ColumnacdCfmMepCfgDirection | read-create | current | Direction in which the Maintenance association (MEP) faces on the bridge port. |
| 1.3.6.1.4.1.22420.2.7.1.3.5.1.10 | ColumnacdCfmMepCfgPrimaryVid | read-write | current | Primary Vlan Id. |
| 1.3.6.1.4.1.22420.2.7.1.3.5.1.11 | ColumnacdCfmMepCfgActive | read-write | current | Administrative state of the MEP. A Boolean indicating the administrative state of the MEP. |
| 1.3.6.1.4.1.22420.2.7.1.3.5.1.12 | ColumnacdCfmMepCfgCciEnable | read-write | current | If set to true, the MEP will generate CCM messages. |
| 1.3.6.1.4.1.22420.2.7.1.3.5.1.13 | ColumnacdCfmMepCfgCcmSeqEnable | read-write | current | If set to true, the sequence number in the CCM PDU will increment. |
| 1.3.6.1.4.1.22420.2.7.1.3.5.1.14 | ColumnacdCfmMepCfgPriority | read-write | current | The priority value for CCMs and LTMs transmitted by the MEP. |
| 1.3.6.1.4.1.22420.2.7.1.3.5.1.15 | ColumnacdCfmMepCfgAlarmPri | read-write | current | The highest priority defect that has been present since the MEPs Fault Notification Generator State Machine was last in the FNG_RESET state. |
| 1.3.6.1.4.1.22420.2.7.1.3.5.1.16 | ColumnacdCfmMepCfgFngAlarmTime | read-write | current | The time that defects must be present before a Fault Alarm is issued (default 2500 milliseconds). |
| 1.3.6.1.4.1.22420.2.7.1.3.5.1.17 | ColumnacdCfmMepCfgFngResetTime | read-write | current | The time that defects must be present before a Fault Alarm is issued (default 10000 milliseconds). |
| 1.3.6.1.4.1.22420.2.7.1.3.5.1.18 | ColumnacdCfmMepCfgFpEnable | read-write | current | If set to true, the faults generated by this MEP will be propagated to the Fault Propagation port. |
| 1.3.6.1.4.1.22420.2.7.1.3.5.1.19 | ColumnacdCfmMepCfgFpPortId | read-write | current | The fault propagation port used to propagate faults. |
| 1.3.6.1.4.1.22420.2.7.1.3.5.1.20 | ColumnacdCfmMepCfgCsfEnable | read-write | current | If set to true, Client Signal Fail errors will be propagated to the Fault Propagation port. |
| 1.3.6.1.4.1.22420.2.7.1.3.5.1.21 | ColumnacdCfmMepCfgInterfaceStatusTLVEnable | read-write | current | If set to true, Interface Status TLV will be included in Down MEP CCM PDU. Interface status is obtained from the Fault Propagation port. |
| 1.3.6.1.4.1.22420.2.7.1.4 | NodeacdCfmStack | |||
| 1.3.6.1.4.1.22420.2.7.1.4.1 | TableacdCfmStackTable | not-accessible | current | Configuration table of stack entries. |
| 1.3.6.1.4.1.22420.2.7.1.4.1.1 | RowacdCfmStackEntry | not-accessible | current | An entry consisting of all informations to tie together. |
| 1.3.6.1.4.1.22420.2.7.1.4.1.1.1 | ColumnacdCfmMdIdx | not-accessible | current | Maintenance Domain(MD) index from table dot1agCfmMepTable in IEEE8021-CFM-MIB. |
| 1.3.6.1.4.1.22420.2.7.1.4.1.1.2 | ColumnacdCfmMaIdx | not-accessible | current | Maintenance Association(MA) index from table dot1agCfmMepTable in IEEE8021-CFM-MIB. |
| 1.3.6.1.4.1.22420.2.7.1.4.1.1.3 | ColumnacdCfmMepID | not-accessible | current | Maintenance End Point(Mep) index from table dot1agCfmMepTable in IEEE8021-CFM-MIB. |
| 1.3.6.1.4.1.22420.2.7.1.4.1.1.4 | ColumnacdCfmMepIdx | read-only | current | Maintenance End Point(Mep) index from table acdCfmDmCfgTable in ACD-CFM-MIB. |
| 1.3.6.1.4.1.22420.2.7.1.5 | NodeacdCfmSlm | |||
| 1.3.6.1.4.1.22420.2.7.1.5.1 | TableacdCfmSlmCfgTable | not-accessible | current | Configuration table of all SLM entries. |
| 1.3.6.1.4.1.22420.2.7.1.5.1.1 | RowacdCfmSlmCfgEntry | not-accessible | current | An entry consisting of all settings to manage a SLM instance. |
| 1.3.6.1.4.1.22420.2.7.1.5.1.1.1 | ColumnacdCfmSlmCfgID | not-accessible | current | Unique value for each SLM instance. This value follows the ordering the results table. |
| 1.3.6.1.4.1.22420.2.7.1.5.1.1.2 | ColumnacdCfmSlmCfgRowStatus | read-only | current | The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated. |
| 1.3.6.1.4.1.22420.2.7.1.5.1.1.3 | ColumnacdCfmSlmCfgMepIdx | read-only | current | Maintenance association End Point Identifier. |
| 1.3.6.1.4.1.22420.2.7.1.5.1.1.4 | ColumnacdCfmSlmCfgRemoteMepId | read-only | current | Remote Maintenance association End Point Identifier. |
| 1.3.6.1.4.1.22420.2.7.1.5.1.1.5 | ColumnacdCfmSlmCfgPriority | read-only | current | The VLAN priority. Its value ranges from 0 to 7. |
| 1.3.6.1.4.1.22420.2.7.1.5.1.1.6 | ColumnacdCfmSlmCfgState | read-only | current | State of the SLM instance |
| 1.3.6.1.4.1.22420.2.7.1.5.1.1.7 | ColumnacdCfmSlmCfgInterval | read-only | current | Interval in milliseconds at which CFM issues Synthetic Loss Measurement packets. |
| 1.3.6.1.4.1.22420.2.7.1.5.1.1.8 | ColumnacdCfmSlmCfgRefPeriod | read-only | current | Reference period in minutes for Synthetic Loss Measurement. |
| 1.3.6.1.4.1.22420.2.7.1.5.1.1.9 | ColumnacdCfmSlmCfgNearEndThresh | read-only | current | Near end packet loss ratio threshold allowed without issuing an alarm expressed in millionth of percent (1,000,000 is 1%). |
| 1.3.6.1.4.1.22420.2.7.1.5.1.1.10 | ColumnacdCfmSlmCfgFarEndThresh | read-only | current | Far end packet loss ratio threshold allowed without issuing an alarm expressed in millionth of percent (1,000,000 is 1%). |
| 1.3.6.1.4.1.22420.2.7.1.5.1.1.11 | ColumnacdCfmSlmCfgName | read-only | current | The name of the instance |
| 1.3.6.1.4.1.22420.2.7.1.5.2 | TableacdCfmSlmResultTable | not-accessible | current | SLM result table of a MEP and remote MEP pair. |
| 1.3.6.1.4.1.22420.2.7.1.5.2.1 | RowacdCfmSlmResultEntry | not-accessible | current | An entry consisting of SLM result for a specific MEP and remote MEP pair. |
| 1.3.6.1.4.1.22420.2.7.1.5.2.1.1 | ColumnacdCfmSlmResultID | not-accessible | current | Unique value for each SLM instance. This value follows the ordering of the SLM table. |
| 1.3.6.1.4.1.22420.2.7.1.5.2.1.2 | ColumnacdCfmSlmResultPeriodIndex | read-only | current | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same PL instance. This index starts at 1 an… |
| 1.3.6.1.4.1.22420.2.7.1.5.2.1.3 | ColumnacdCfmSlmResultIntervalStart | read-only | current | This is the time of the start of the period. |
| 1.3.6.1.4.1.22420.2.7.1.5.2.1.4 | ColumnacdCfmSlmResultValid | read-only | current | Reserved for future use. |
| 1.3.6.1.4.1.22420.2.7.1.5.2.1.5 | ColumnacdCfmSlmResultNearEndAlert | read-only | current | Indicate the presence of the SLM near end alert. |
| 1.3.6.1.4.1.22420.2.7.1.5.2.1.6 | ColumnacdCfmSlmResultFarEndAlert | read-only | current | Indicate the presence of the SLM far end alert. |
| 1.3.6.1.4.1.22420.2.7.1.5.2.1.7 | ColumnacdCfmSlmResultTxSlm | read-only | current | Indicates the number of SLM frames sent. |
| 1.3.6.1.4.1.22420.2.7.1.5.2.1.8 | ColumnacdCfmSlmResultRxSlr | read-only | current | Indicates the number of SLR frames received. |
| 1.3.6.1.4.1.22420.2.7.1.5.2.1.9 | ColumnacdCfmSlmResultRemoteRxSlm | read-only | current | Indicates the number of SLM frames received at the far end. |
| 1.3.6.1.4.1.22420.2.7.1.5.2.1.10 | ColumnacdCfmSlmResultNearEndNbrLoss | read-only | current | This is the number of packets lost at the near end. |
| 1.3.6.1.4.1.22420.2.7.1.5.2.1.11 | ColumnacdCfmSlmResultFarEndNbrLoss | read-only | current | This is the number of packets lost at the far end. |
| 1.3.6.1.4.1.22420.2.7.1.5.2.1.12 | ColumnacdCfmSlmResultNearEndRatio | read-only | current | This is the packet loss ratio at the near end. Indicates the availability ratio in millionth of a percent (1,000,000 is 1%). |
| 1.3.6.1.4.1.22420.2.7.1.5.2.1.13 | ColumnacdCfmSlmResultFarEndRatio | read-only | current | This is the packet loss ratio at the far end. Indicates the availability ratio in millionth of a percent (1,000,000 is 1%). |
| 1.3.6.1.4.1.22420.2.7.1.5.2.1.14 | ColumnacdCfmSlmResultNbrGaps | read-only | current | This is the number of gap. |
| 1.3.6.1.4.1.22420.2.7.1.5.2.1.15 | ColumnacdCfmSlmResultLargestGap | read-only | current | This is the largest gap. |
| 1.3.6.1.4.1.22420.2.7.1.5.2.1.16 | ColumnacdCfmSlmResultName | read-only | current | Unique string for each SLM instance. The length includes the terminating NULL character. This is a duplicate of acdCfmSlmCfgName |
| 1.3.6.1.4.1.22420.2.7.1.5.3 | TableacdCfmSlmHistResultTable | not-accessible | current | SLM history result table of a MEP and remote MEP pair. |
| 1.3.6.1.4.1.22420.2.7.1.5.3.1 | RowacdCfmSlmHistResultEntry | not-accessible | current | An entry consisting of SLM history result for a specific MEP and remote MEP pair. |
| 1.3.6.1.4.1.22420.2.7.1.5.3.1.1 | ColumnacdCfmSlmHistResultID | read-only | current | Unique value for each SLM instance. This value follows the ordering of the SLM table. |
| 1.3.6.1.4.1.22420.2.7.1.5.3.1.2 | ColumnacdCfmSlmHistResultPeriodIndex | read-only | current | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same PL instance. This index starts at 1 an… |
| 1.3.6.1.4.1.22420.2.7.1.5.3.1.3 | ColumnacdCfmSlmHistResultIntervalEnd | read-only | current | This is the time of the end of the period. |
| 1.3.6.1.4.1.22420.2.7.1.5.3.1.4 | ColumnacdCfmSlmHistResultTxSlm | read-only | current | Indicates the number of SLM frames sent. |
| 1.3.6.1.4.1.22420.2.7.1.5.3.1.5 | ColumnacdCfmSlmHistResultRxSlr | read-only | current | Indicates the number of SLR frames received. |
| 1.3.6.1.4.1.22420.2.7.1.5.3.1.6 | ColumnacdCfmSlmHistResultRemoteRxSlm | read-only | current | Indicates the number of SLM frames received at the far end. |
| 1.3.6.1.4.1.22420.2.7.1.5.3.1.7 | ColumnacdCfmSlmHistResultNearEndRatio | read-only | current | This is the packet loss ratio at the near end. Indicates the availability ratio in millionth of a percent (1,000,000 is 1%). |
| 1.3.6.1.4.1.22420.2.7.1.5.3.1.8 | ColumnacdCfmSlmHistResultFarEndRatio | read-only | current | This is the packet loss ratio at the far end. Indicates the availability ratio in millionth of a percent (1,000,000 is 1%). |
| 1.3.6.1.4.1.22420.2.7.1.5.3.1.9 | ColumnacdCfmSlmHistResultNbrGaps | read-only | current | This is the number of gap. |
| 1.3.6.1.4.1.22420.2.7.1.5.3.1.10 | ColumnacdCfmSlmHistResultLargestGap | read-only | current | This is the largest gap. |
| 1.3.6.1.4.1.22420.2.7.1.5.3.1.11 | ColumnacdCfmSlmHistResultInstanceIndex | read-only | current | The instance index. |
| 1.3.6.1.4.1.22420.2.7.1.5.3.1.12 | ColumnacdCfmSlmHistResultName | read-only | current | Unique string for each SLM instance. The length includes the terminating NULL character. This is a duplicate of acdCfmSlmCfgName |
| 1.3.6.1.4.1.22420.2.7.1.6 | NodeacdCfmConfig | |||
| 1.3.6.1.4.1.22420.2.7.1.6.1 | TableacdCfmCfgIfAssignTable | not-accessible | current | Configuration table of interface assign entries. |
| 1.3.6.1.4.1.22420.2.7.1.6.1.1 | RowacdCfmCfgIfAssignEntry | not-accessible | current | An entry consisting of all settings to assign/unassign an interface to a mep. |
| 1.3.6.1.4.1.22420.2.7.1.6.1.1.1 | ColumnacdCfmCfgIfAssignRowStatus | read-create | current | All columns must have a valid value before a row can be activated. |
| 1.3.6.1.4.1.22420.2.7.1.6.1.1.2 | ColumnacdCfmCfgIfAssignInstIdx | not-accessible | current | Interface ID of interface to assign/unassing. The numbering of this index is non-contiguous. Interfaces not present in the table cannot be assigned to a mep. |
| 1.3.6.1.4.1.22420.2.7.1.6.1.1.3 | ColumnacdCfmCfgIfAssignIfName | read-only | current | System interface name of the interface to assign/unassign. |
| 1.3.6.1.4.1.22420.2.7.1.6.1.1.4 | ColumnacdCfmCfgIfAssignLockAssign | read-write | current | The current lock assignment configuration on an interface. |
| 1.3.6.1.4.1.22420.2.7.2 | NodeacdCfmConformance | |||
| 1.3.6.1.4.1.22420.2.7.2.1 | NodeacdCfmCompliances | |||
| 1.3.6.1.4.1.22420.2.7.2.1.1 | ComplianceacdCfmCompliance | current | The compliance statement for support of the ACD-CFM-MIB module. | |
| 1.3.6.1.4.1.22420.2.7.2.2 | NodeacdCfmGroups | |||
| 1.3.6.1.4.1.22420.2.7.2.2.1 | GroupacdCfmDmCfgGroup | current | Objects for the Delay Measurement configuration Group. | |
| 1.3.6.1.4.1.22420.2.7.2.2.2 | GroupacdCfmResultOneWayDelayGroup | current | Objects for the One Way Delay result Group. | |
| 1.3.6.1.4.1.22420.2.7.2.2.3 | GroupacdCfmResultOneWayDvGroup | current | Objects for the One Way Delay variation result Group. | |
| 1.3.6.1.4.1.22420.2.7.2.2.4 | GroupacdCfmResultTwoWayDelayGroup | current | Objects for the Two Way Delay result Group. | |
| 1.3.6.1.4.1.22420.2.7.2.2.5 | GroupacdCfmResultTwoWayDvGroup | current | Objects for the Two Way Delay varition result Group. | |
| 1.3.6.1.4.1.22420.2.7.2.2.6 | GroupacdCfmHistResultOneWayDelayGroup | current | Objects for the One Way Delay history result Group. | |
| 1.3.6.1.4.1.22420.2.7.2.2.7 | GroupacdCfmHistResultOneWayDvGroup | current | Objects for the One Way Delay variation history result Group. | |
| 1.3.6.1.4.1.22420.2.7.2.2.8 | GroupacdCfmHistResultTwoWayDelayGroup | current | Objects for the Two Way Delay history result Group. | |
| 1.3.6.1.4.1.22420.2.7.2.2.9 | GroupacdCfmHistResultTwoWayDvGroup | current | Objects for the Two Way Delay variation history result Group. | |
| 1.3.6.1.4.1.22420.2.7.2.2.10 | GroupacdCfmPktLossCfgGroup | current | Objects for Packet loss configuration Group. | |
| 1.3.6.1.4.1.22420.2.7.2.2.11 | GroupacdCfmResultPktLossGroup | current | Objects for Packet loss result Group. | |
| 1.3.6.1.4.1.22420.2.7.2.2.12 | GroupacdCfmHistResultPktLossGroup | current | Objects for Packet loss history result Group. | |
| 1.3.6.1.4.1.22420.2.7.2.2.13 | GroupacdCfmMepStatsTxGroup | current | Objects for MEP transmit statistics Group. | |
| 1.3.6.1.4.1.22420.2.7.2.2.14 | GroupacdCfmMepStatsRxGroup | current | Objects for MEP receive statistics Group. | |
| 1.3.6.1.4.1.22420.2.7.2.2.15 | GroupacdCfmMepDmStatsGroup | current | Objects for DMM/DMR MEP statistics Group. | |
| 1.3.6.1.4.1.22420.2.7.2.2.16 | GroupacdCfmMepStackGroup | current | Objects for cfm Stack Group. | |
| 1.3.6.1.4.1.22420.2.7.2.2.17 | GroupacdCfmMepSlmStatsGroup | current | Objects for SLM/SLR MEP statistics Group. | |
| 1.3.6.1.4.1.22420.2.7.2.2.18 | GroupacdCfmSlmCfgGroup | current | Objects for SLM configuration Group. | |
| 1.3.6.1.4.1.22420.2.7.2.2.19 | GroupacdCfmSlmResultGroup | current | Objects for SLM result Group. | |
| 1.3.6.1.4.1.22420.2.7.2.2.20 | GroupacdCfmSlmHistResultGroup | current | Objects for SLM history result Group. | |
| 1.3.6.1.4.1.22420.2.7.2.2.21 | GroupacdCfmMepCfgGroup | current | Objects for MEP Config Group. | |
| 1.3.6.1.4.1.22420.2.7.2.2.22 | GroupacdCfmCfgIfAssignGroup | current | Objects for configuration of interface assign Group. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AcdCfmInterfaceAssign | INTEGER { unassigned (1), assigned (2) } | current | Indicates the assignment configuration/state of a system interface unassigned(1) Interface has not been assigned to a cfm assigned(2) Interface has been assigned to a cfm |
| AcdCfmMepDirection | INTEGER { down (1), up (2) } | current | Indicates the direction in which the Maintenance association (MEP) faces on the bridge port: down(1) Sends Continuity Check Messages away from the MAC Relay Entity. up(2) Sends Continuity Check Messages towards the MAC … |
| AcdCfmMepLowestAlarmPri | INTEGER { soamAll (1), soamMacRemErrXcon (2), soamRemErrXcon (3), soamErrXcon (4), soamXcon (5), soamAis (6), soamNone (7) } | current | An integer value specifying the lowest priority defect that is allowed to generate a Fault Alarm (20.9.5), either: soamAll(1) DefRDICCM, DefMACstatus, DefRemoteCCM, DefErrorCCM, and DefXconCCM; soamMacRemErrXcon(2) Only… |