ACD-FILTER-MIB
180 objects
The Filter database for this Accedian Networks device.
Imported Objects
| ACCEDIAN-SMI | acdMibs |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.22420.2.2 | IdentityacdFilter | The Filter database for this Accedian Networks device. | ||
| 1.3.6.1.4.1.22420.2.2.1 | TableacdL2FilterTable | not-accessible | deprecated | Table of all Layer 2 filters |
| 1.3.6.1.4.1.22420.2.2.1.1 | RowacdL2FilterEntry | not-accessible | current | A Filter is a pattern matching a definition against packets. |
| 1.3.6.1.4.1.22420.2.2.1.1.1 | ColumnacdL2FilterID | not-accessible | current | Unique value for each filter. Its value ranges from 1 to maximum value. This maximum value depend of the type of platform. |
| 1.3.6.1.4.1.22420.2.2.1.1.2 | ColumnacdL2FilterName | read-create | current | This is a string to identify the filter. |
| 1.3.6.1.4.1.22420.2.2.1.1.3 | ColumnacdL2FilterMacDstEn | read-create | current | Enable or disable the destination MAC address check. |
| 1.3.6.1.4.1.22420.2.2.1.1.4 | ColumnacdL2FilterMacDst | read-create | current | The destination MAC address used to compare the incoming traffic. |
| 1.3.6.1.4.1.22420.2.2.1.1.5 | ColumnacdL2FilterMacDstMask | read-create | current | Number of destination MAC address bits to compare. Its value ranges from 0 to 48. Only specific mask are valid per platform. |
| 1.3.6.1.4.1.22420.2.2.1.1.6 | ColumnacdL2FilterMacSrcEn | read-create | current | Enable or disable the source MAC address check. |
| 1.3.6.1.4.1.22420.2.2.1.1.7 | ColumnacdL2FilterMacSrc | read-create | current | The source MAC address used to compare the incoming traffic. |
| 1.3.6.1.4.1.22420.2.2.1.1.8 | ColumnacdL2FilterMacSrcMask | read-create | current | Number of source MAC address bits to compare. Its value ranges from 0 to 48. Only specific mask are valid per platform. |
| 1.3.6.1.4.1.22420.2.2.1.1.9 | ColumnacdL2FilterEtypeEn | read-create | current | Enable or disable the Ethernet type check. |
| 1.3.6.1.4.1.22420.2.2.1.1.10 | ColumnacdL2FilterEtype | read-create | current | The Ethernet type used to compare the incoming traffic. |
| 1.3.6.1.4.1.22420.2.2.1.1.11 | ColumnacdL2FilterVlan1PriorEn | read-create | current | Enable or disable the first VLAN priority check. |
| 1.3.6.1.4.1.22420.2.2.1.1.12 | ColumnacdL2FilterVlan1Prior | read-create | current | The first VLAN priority used to compare the incoming traffic. Its value ranges from 0 to 7. |
| 1.3.6.1.4.1.22420.2.2.1.1.13 | ColumnacdL2FilterVlan1CfiEn | read-create | current | Enable or disable the first VLAN CFI check. |
| 1.3.6.1.4.1.22420.2.2.1.1.14 | ColumnacdL2FilterVlan1Cfi | read-create | current | The first VLAN CFI used to compare the incoming traffic. Its value is 0 or 1. |
| 1.3.6.1.4.1.22420.2.2.1.1.15 | ColumnacdL2FilterVlan1IdEn | read-create | current | Enable or disable the first VLAN ID check. |
| 1.3.6.1.4.1.22420.2.2.1.1.16 | ColumnacdL2FilterVlan1Id | read-create | current | The first VLAN ID used to compare the incoming traffic. Its value ranges from 0 to 4095. |
| 1.3.6.1.4.1.22420.2.2.1.1.17 | ColumnacdL2FilterVlan2PriorEn | read-create | current | Enable or disable the second VLAN priority check. |
| 1.3.6.1.4.1.22420.2.2.1.1.18 | ColumnacdL2FilterVlan2Prior | read-create | current | The second VLAN priority used to compare the incoming traffic. Its value ranges from 0 to 7. |
| 1.3.6.1.4.1.22420.2.2.1.1.19 | ColumnacdL2FilterVlan2CfiEn | read-create | current | Enable or disable the second VLAN CFI check. |
| 1.3.6.1.4.1.22420.2.2.1.1.20 | ColumnacdL2FilterVlan2Cfi | read-create | current | The second VLAN CFI used to compare the incoming traffic. Its value is 0 or 1. |
| 1.3.6.1.4.1.22420.2.2.1.1.21 | ColumnacdL2FilterVlan2IdEn | read-create | current | Enable or disable the second VLAN ID check. |
| 1.3.6.1.4.1.22420.2.2.1.1.22 | ColumnacdL2FilterVlan2Id | read-create | current | The second VLAN ID used to compare the incoming traffic. Its value ranges from 0 to 4095. |
| 1.3.6.1.4.1.22420.2.2.1.1.23 | ColumnacdL2FilterRowStatus | read-create | current | All columns must have a valid value before a row can be activated. To create a new filter you shall provide the a unique filter name for an empty row with the … |
| 1.3.6.1.4.1.22420.2.2.2 | TableacdIPv4FilterTable | not-accessible | deprecated | Table of all IPv4 filters |
| 1.3.6.1.4.1.22420.2.2.2.1 | RowacdIPv4FilterEntry | not-accessible | current | A Filter is a pattern matching a definition against packets. |
| 1.3.6.1.4.1.22420.2.2.2.1.1 | ColumnacdIPv4FilterID | not-accessible | current | Unique value for each filter. Its value ranges from 1 to maximum value. This maximum value depend of the type of platform. |
| 1.3.6.1.4.1.22420.2.2.2.1.2 | ColumnacdIPv4FilterName | read-create | current | This is a string to identify the filter. |
| 1.3.6.1.4.1.22420.2.2.2.1.3 | ColumnacdIPv4FilterSrcEn | read-create | current | Enable or disable the Source IP address check. |
| 1.3.6.1.4.1.22420.2.2.2.1.4 | ColumnacdIPv4FilterSrc | read-create | current | The source IP address used to compare the incoming traffic. |
| 1.3.6.1.4.1.22420.2.2.2.1.5 | ColumnacdIPv4FilterSrcMask | read-create | current | The source IP address mask used to compare the incoming traffic. |
| 1.3.6.1.4.1.22420.2.2.2.1.6 | ColumnacdIPv4FilterDstEn | read-create | current | Enable or disable the Destination IP address check. |
| 1.3.6.1.4.1.22420.2.2.2.1.7 | ColumnacdIPv4FilterDst | read-create | current | The destination IP address used to compare the incoming traffic. |
| 1.3.6.1.4.1.22420.2.2.2.1.8 | ColumnacdIPv4FilterDstMask | read-create | current | The destination IP address mask used to compare the incoming traffic. |
| 1.3.6.1.4.1.22420.2.2.2.1.9 | ColumnacdIPv4FilterProtoEn | read-create | current | Enable or disable the IP protocol check. |
| 1.3.6.1.4.1.22420.2.2.2.1.10 | ColumnacdIPv4FilterProto | read-create | current | The IP protocol used to compare the incoming traffic. Its value ranges from 0 to 255. |
| 1.3.6.1.4.1.22420.2.2.2.1.11 | ColumnacdIPv4FilterTTLEn | read-create | current | Enable or disable the TTL check. |
| 1.3.6.1.4.1.22420.2.2.2.1.12 | ColumnacdIPv4FilterTTL | read-create | current | The TTL used to compare the incoming traffic. Its value ranges from 0 to 255. |
| 1.3.6.1.4.1.22420.2.2.2.1.13 | ColumnacdIPv4FilterIHLEn | read-create | current | Enable or disable the IP Header Length check. |
| 1.3.6.1.4.1.22420.2.2.2.1.14 | ColumnacdIPv4FilterIHL | read-create | current | The IP Header Length used to compare the incoming traffic. Its value ranges from 5 to 15. |
| 1.3.6.1.4.1.22420.2.2.2.1.15 | ColumnacdIPv4FilterDscpEn | read-create | current | Enable or disable the DSCP (Diff-Serv Code Point) check. |
| 1.3.6.1.4.1.22420.2.2.2.1.16 | ColumnacdIPv4FilterDscp | read-create | current | The DSCP value used to compare the incoming traffic. Its value ranges from 0 to 63. |
| 1.3.6.1.4.1.22420.2.2.2.1.17 | ColumnacdIPv4FilterECNEn | read-create | current | Enable or disable the ECN (Explicite Cogestion Notification) check. |
| 1.3.6.1.4.1.22420.2.2.2.1.18 | ColumnacdIPv4FilterECN | read-create | current | The ECN value used to compare the incoming traffic. Its value ranges from 0 to 3. |
| 1.3.6.1.4.1.22420.2.2.2.1.19 | ColumnacdIPv4FilterSrcPortEn | read-create | current | Enable or disable the UDP/TCP Source port check. |
| 1.3.6.1.4.1.22420.2.2.2.1.20 | ColumnacdIPv4FilterSrcPort | read-create | current | The UDP/TCP Source Port used to compare the incoming traffic. Its value ranges from 0 to 65535. |
| 1.3.6.1.4.1.22420.2.2.2.1.21 | ColumnacdIPv4FilterDstPortEn | read-create | current | Enable or disable the UDP/TCP Destination port check. |
| 1.3.6.1.4.1.22420.2.2.2.1.22 | ColumnacdIPv4FilterDstPort | read-create | current | The UDP/TCP Destination Port used to compare the incoming traffic. Its value ranges from 0 to 65535. |
| 1.3.6.1.4.1.22420.2.2.2.1.23 | ColumnacdIPv4FilterIcmpTypeEn | read-create | current | Enable or disable the ICMP type check. |
| 1.3.6.1.4.1.22420.2.2.2.1.24 | ColumnacdIPv4FilterIcmpType | read-create | current | The ICMP type used to compare the incoming traffic. Its value ranges from 0 to 255. |
| 1.3.6.1.4.1.22420.2.2.2.1.25 | ColumnacdIPv4FilterIcmpCodeEn | read-create | current | Enable or disable the ICMP code check. |
| 1.3.6.1.4.1.22420.2.2.2.1.26 | ColumnacdIPv4FilterIcmpCode | read-create | current | The ICMP code used to compare the incoming traffic. Its value ranges from 0 to 255. |
| 1.3.6.1.4.1.22420.2.2.2.1.27 | ColumnacdIPv4FilterRowStatus | read-create | current | All columns must have a valid value before a row can be activated. To create a new filter you shall provide the a unique filter name for an empty row with the … |
| 1.3.6.1.4.1.22420.2.2.3 | TableacdSmapL2FilterTable | not-accessible | current | Table of all service mapping (SMAP) Layer 2 filters |
| 1.3.6.1.4.1.22420.2.2.3.1 | RowacdSmapL2FilterEntry | not-accessible | current | A Filter is a pattern matching a definition against packets. |
| 1.3.6.1.4.1.22420.2.2.3.1.1 | ColumnacdSmapL2FilterID | not-accessible | current | Unique value for each filter. Its value ranges from 1 to maximum value. This maximum value depend of the type of platform. |
| 1.3.6.1.4.1.22420.2.2.3.1.2 | ColumnacdSmapL2FilterName | read-create | current | This is a string to identify the filter. |
| 1.3.6.1.4.1.22420.2.2.3.1.3 | ColumnacdSmapL2FilterRowStatus | read-create | current | All columns must have a valid value before a row can be activated. To create a new filter you shall provide the a unique filter name for an empty row with the … |
| 1.3.6.1.4.1.22420.2.2.3.1.4 | ColumnacdSmapL2FilterVlan1PriorEn | read-create | current | Enable or disable the first VLAN priority check. |
| 1.3.6.1.4.1.22420.2.2.3.1.5 | ColumnacdSmapL2FilterVlan1Prior | read-create | current | The first VLAN priority used to compare the incoming traffic. Its value ranges from 0 to 7. |
| 1.3.6.1.4.1.22420.2.2.3.1.6 | ColumnacdSmapL2FilterVlan1PriorLast | read-create | current | First VLAN priority last value, used in range operation. Its value ranges from 0 to 7. |
| 1.3.6.1.4.1.22420.2.2.3.1.7 | ColumnacdSmapL2FilterVlan1PriorOper | read-create | current | First VLAN Priority operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). |
| 1.3.6.1.4.1.22420.2.2.3.1.8 | ColumnacdSmapL2FilterVlan1IdEn | read-create | current | Enable or disable the first VLAN ID check. |
| 1.3.6.1.4.1.22420.2.2.3.1.9 | ColumnacdSmapL2FilterVlan1Id | read-create | current | The first VLAN ID used to compare the incoming traffic. Its value ranges from 0 to 4095. |
| 1.3.6.1.4.1.22420.2.2.3.1.10 | ColumnacdSmapL2FilterVlan1IdLast | read-create | current | First VLAN ID last value, used in range operation. Its value ranges from 0 to 4095. |
| 1.3.6.1.4.1.22420.2.2.3.1.11 | ColumnacdSmapL2FilterVlan1IdOper | read-create | current | First VLAN ID operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). |
| 1.3.6.1.4.1.22420.2.2.3.1.12 | ColumnacdSmapL2FilterVlan1CfiEn | read-create | current | Enable or disable the first VLAN CFI check. |
| 1.3.6.1.4.1.22420.2.2.3.1.13 | ColumnacdSmapL2FilterVlan1Cfi | read-create | current | The first VLAN CFI used to compare the incoming traffic. Its value is 0 or 1. |
| 1.3.6.1.4.1.22420.2.2.3.1.14 | ColumnacdSmapL2FilterVlan1TypeEn | read-create | current | Enable or disable the first VLAN Ethertype check. |
| 1.3.6.1.4.1.22420.2.2.3.1.15 | ColumnacdSmapL2FilterVlan1Type | read-create | current | VLAN Ethernet type. |
| 1.3.6.1.4.1.22420.2.2.3.1.16 | ColumnacdSmapL2FilterVlan2PriorEn | read-create | current | Enable or disable the second VLAN priority check. |
| 1.3.6.1.4.1.22420.2.2.3.1.17 | ColumnacdSmapL2FilterVlan2Prior | read-create | current | The second VLAN priority used to compare the incoming traffic. Its value ranges from 0 to 7. |
| 1.3.6.1.4.1.22420.2.2.3.1.18 | ColumnacdSmapL2FilterVlan2PriorLast | read-create | current | Second VLAN priority last value, used in range operation. Its value ranges from 0 to 7. |
| 1.3.6.1.4.1.22420.2.2.3.1.19 | ColumnacdSmapL2FilterVlan2PriorOper | read-create | current | VLAN Priority operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). |
| 1.3.6.1.4.1.22420.2.2.3.1.20 | ColumnacdSmapL2FilterVlan2IdEn | read-create | current | Enable or disable the second VLAN ID check. |
| 1.3.6.1.4.1.22420.2.2.3.1.21 | ColumnacdSmapL2FilterVlan2Id | read-create | current | The second VLAN ID used to compare the incoming traffic. Its value ranges from 0 to 4095. |
| 1.3.6.1.4.1.22420.2.2.3.1.22 | ColumnacdSmapL2FilterVlan2IdLast | read-create | current | Second VLAN ID last value, used in range operation. Its value ranges from 0 to 4095. |
| 1.3.6.1.4.1.22420.2.2.3.1.23 | ColumnacdSmapL2FilterVlan2IdOper | read-create | current | Second VLAN ID operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). |
| 1.3.6.1.4.1.22420.2.2.3.1.24 | ColumnacdSmapL2FilterVlan2CfiEn | read-create | current | Enable or disable the second VLAN CFI check. |
| 1.3.6.1.4.1.22420.2.2.3.1.25 | ColumnacdSmapL2FilterVlan2Cfi | read-create | current | The second VLAN CFI used to compare the incoming traffic. Its value is 0 or 1. |
| 1.3.6.1.4.1.22420.2.2.3.1.26 | ColumnacdSmapL2FilterVlan2TypeEn | read-create | current | Enable or disable the second VLAN Ethertype check. |
| 1.3.6.1.4.1.22420.2.2.3.1.27 | ColumnacdSmapL2FilterVlan2Type | read-create | current | VLAN Ethernet type. |
| 1.3.6.1.4.1.22420.2.2.3.1.28 | ColumnacdSmapL2FilterMacDstEn | read-create | current | Enable or disable the destination MAC address check. |
| 1.3.6.1.4.1.22420.2.2.3.1.29 | ColumnacdSmapL2FilterMacDst | read-create | current | The destination MAC address used to compare the incoming traffic. |
| 1.3.6.1.4.1.22420.2.2.3.1.30 | ColumnacdSmapL2FilterMacDstMask | read-create | current | Number of destination MAC address bits to compare. Its value ranges from 0 to 48. |
| 1.3.6.1.4.1.22420.2.2.3.1.31 | ColumnacdSmapL2FilterMacSrcEn | read-create | current | Enable or disable the source MAC address check. |
| 1.3.6.1.4.1.22420.2.2.3.1.32 | ColumnacdSmapL2FilterMacSrc | read-create | current | The source MAC address used to compare the incoming traffic. |
| 1.3.6.1.4.1.22420.2.2.3.1.33 | ColumnacdSmapL2FilterMacSrcMask | read-create | current | Number of source MAC address bits to compare. Its value ranges from 0 to 48. |
| 1.3.6.1.4.1.22420.2.2.3.1.34 | ColumnacdSmapL2FilterEtypeEn | read-create | current | Enable or disable the Ethernet type check. |
| 1.3.6.1.4.1.22420.2.2.3.1.35 | ColumnacdSmapL2FilterEtype | read-create | current | The Ethernet type used to compare the incoming traffic. |
| 1.3.6.1.4.1.22420.2.2.3.1.36 | ColumnacdSmapL2FilterIpCosEn | read-create | current | Enable or disable the Ethernet type check. |
| 1.3.6.1.4.1.22420.2.2.3.1.37 | ColumnacdSmapL2FilterIpCosMode | read-create | current | VLAN ID operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). |
| 1.3.6.1.4.1.22420.2.2.3.1.38 | ColumnacdSmapL2FilterDscp | read-create | current | The DSCP value used to compare the incoming traffic. Its value ranges from 0 to 63. |
| 1.3.6.1.4.1.22420.2.2.3.1.39 | ColumnacdSmapL2FilterDscpLast | read-create | current | The last DSCP value, used in range operation. Its value ranges from 0 to 63. |
| 1.3.6.1.4.1.22420.2.2.3.1.40 | ColumnacdSmapL2FilterDscpOper | read-create | current | DSCP operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). |
| 1.3.6.1.4.1.22420.2.2.3.1.41 | ColumnacdSmapL2FilterPre | read-create | current | The Precedence value used to compare the incoming traffic. Its value ranges from 0 to 3. |
| 1.3.6.1.4.1.22420.2.2.3.1.42 | ColumnacdSmapL2FilterPreLast | read-create | current | The last Precedence value, used in range operation. Its value ranges from 0 to 3. |
| 1.3.6.1.4.1.22420.2.2.3.1.43 | ColumnacdSmapL2FilterPreOper | read-create | current | Precedence operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). |
| 1.3.6.1.4.1.22420.2.2.4 | TableacdSmapIPv4FilterTable | not-accessible | current | Table of all Extended IPv4 filters |
| 1.3.6.1.4.1.22420.2.2.4.1 | RowacdSmapIPv4FilterEntry | not-accessible | current | A Filter is a pattern matching a definition against packets. |
| 1.3.6.1.4.1.22420.2.2.4.1.1 | ColumnacdSmapIPv4FilterID | not-accessible | current | Unique value for each filter. Its value ranges from 1 to maximum value. This maximum value depend of the type of platform. |
| 1.3.6.1.4.1.22420.2.2.4.1.2 | ColumnacdSmapIPv4FilterName | read-create | current | This is a string to identify the filter. |
| 1.3.6.1.4.1.22420.2.2.4.1.3 | ColumnacdSmapIPv4FilterRowStatus | read-create | current | All columns must have a valid value before a row can be activated. To create a new filter you shall provide the a unique filter name for an empty row with the … |
| 1.3.6.1.4.1.22420.2.2.4.1.4 | ColumnacdSmapIPv4FilterVlan1PriorEn | read-create | current | Enable or disable the first VLAN priority check. |
| 1.3.6.1.4.1.22420.2.2.4.1.5 | ColumnacdSmapIPv4FilterVlan1Prior | read-create | current | The first VLAN priority used to compare the incoming traffic. Its value ranges from 0 to 7. |
| 1.3.6.1.4.1.22420.2.2.4.1.6 | ColumnacdSmapIPv4FilterVlan1PriorLast | read-create | current | First VLAN priority last value, used in range operation. Its value ranges from 0 to 7. |
| 1.3.6.1.4.1.22420.2.2.4.1.7 | ColumnacdSmapIPv4FilterVlan1PriorOper | read-create | current | VLAN Priority operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). |
| 1.3.6.1.4.1.22420.2.2.4.1.8 | ColumnacdSmapIPv4FilterVlan1IdEn | read-create | current | Enable or disable the first VLAN ID check. |
| 1.3.6.1.4.1.22420.2.2.4.1.9 | ColumnacdSmapIPv4FilterVlan1Id | read-create | current | The first VLAN ID used to compare the incoming traffic. Its value ranges from 0 to 4095. |
| 1.3.6.1.4.1.22420.2.2.4.1.10 | ColumnacdSmapIPv4FilterVlan1IdLast | read-create | current | First VLAN ID last value, used in range operation. Its value ranges from 0 to 4095. |
| 1.3.6.1.4.1.22420.2.2.4.1.11 | ColumnacdSmapIPv4FilterVlan1IdOper | read-create | current | First VLAN ID operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). |
| 1.3.6.1.4.1.22420.2.2.4.1.12 | ColumnacdSmapIPv4FilterVlan1CfiEn | read-create | current | Enable or disable the first VLAN CFI check. |
| 1.3.6.1.4.1.22420.2.2.4.1.13 | ColumnacdSmapIPv4FilterVlan1Cfi | read-create | current | The first VLAN CFI used to compare the incoming traffic. Its value is 0 or 1. |
| 1.3.6.1.4.1.22420.2.2.4.1.14 | ColumnacdSmapIPv4FilterVlan1TypeEn | read-create | current | Enable or disable the first VLAN Ethertype check. |
| 1.3.6.1.4.1.22420.2.2.4.1.15 | ColumnacdSmapIPv4FilterVlan1Type | read-create | current | VLAN Ethernet type. |
| 1.3.6.1.4.1.22420.2.2.4.1.16 | ColumnacdSmapIPv4FilterVlan2PriorEn | read-create | current | Enable or disable the second VLAN priority check. |
| 1.3.6.1.4.1.22420.2.2.4.1.17 | ColumnacdSmapIPv4FilterVlan2Prior | read-create | current | The second VLAN priority used to compare the incoming traffic. Its value ranges from 0 to 7. |
| 1.3.6.1.4.1.22420.2.2.4.1.18 | ColumnacdSmapIPv4FilterVlan2PriorLast | read-create | current | Second VLAN priority last value, used in range operation. Its value ranges from 0 to 7. |
| 1.3.6.1.4.1.22420.2.2.4.1.19 | ColumnacdSmapIPv4FilterVlan2PriorOper | read-create | current | VLAN Priority operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). |
| 1.3.6.1.4.1.22420.2.2.4.1.20 | ColumnacdSmapIPv4FilterVlan2IdEn | read-create | current | Enable or disable the second VLAN ID check. |
| 1.3.6.1.4.1.22420.2.2.4.1.21 | ColumnacdSmapIPv4FilterVlan2Id | read-create | current | The second VLAN ID used to compare the incoming traffic. Its value ranges from 0 to 4095. |
| 1.3.6.1.4.1.22420.2.2.4.1.22 | ColumnacdSmapIPv4FilterVlan2IdLast | read-create | current | The second VLAN ID used to compare the incoming traffic. Its value ranges from 0 to 4095. |
| 1.3.6.1.4.1.22420.2.2.4.1.23 | ColumnacdSmapIPv4FilterVlan2IdOper | read-create | current | VLAN ID operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). |
| 1.3.6.1.4.1.22420.2.2.4.1.24 | ColumnacdSmapIPv4FilterVlan2CfiEn | read-create | current | Enable or disable the second VLAN CFI check. |
| 1.3.6.1.4.1.22420.2.2.4.1.25 | ColumnacdSmapIPv4FilterVlan2Cfi | read-create | current | The second VLAN CFI used to compare the incoming traffic. Its value is 0 or 1. |
| 1.3.6.1.4.1.22420.2.2.4.1.26 | ColumnacdSmapIPv4FilterVlan2TypeEn | read-create | current | Enable or disable the second VLAN Ethertype check. |
| 1.3.6.1.4.1.22420.2.2.4.1.27 | ColumnacdSmapIPv4FilterVlan2Type | read-create | current | VLAN Ethernet type. |
| 1.3.6.1.4.1.22420.2.2.4.1.28 | ColumnacdSmapIPv4FilterSrcEn | read-create | current | Enable or disable the Source IP address check. |
| 1.3.6.1.4.1.22420.2.2.4.1.29 | ColumnacdSmapIPv4FilterSrc | read-create | current | The source IP address used to compare the incoming traffic. |
| 1.3.6.1.4.1.22420.2.2.4.1.30 | ColumnacdSmapIPv4FilterSrcMask | read-create | current | The source IP address mask used to compare the incoming traffic. |
| 1.3.6.1.4.1.22420.2.2.4.1.31 | ColumnacdSmapIPv4FilterDstEn | read-create | current | Enable or disable the Destination IP address check. |
| 1.3.6.1.4.1.22420.2.2.4.1.32 | ColumnacdSmapIPv4FilterDst | read-create | current | The destination IP address used to compare the incoming traffic. |
| 1.3.6.1.4.1.22420.2.2.4.1.33 | ColumnacdSmapIPv4FilterDstMask | read-create | current | The destination IP address mask used to compare the incoming traffic. |
| 1.3.6.1.4.1.22420.2.2.4.1.34 | ColumnacdSmapIPv4FilterProtoEn | read-create | current | Enable or disable the IP protocol check. |
| 1.3.6.1.4.1.22420.2.2.4.1.35 | ColumnacdSmapIPv4FilterProto | read-create | current | The IP protocol used to compare the incoming traffic. Its value ranges from 0 to 255. |
| 1.3.6.1.4.1.22420.2.2.4.1.36 | ColumnacdSmapIPv4FilterTTLEn | read-create | current | Enable or disable the TTL check. |
| 1.3.6.1.4.1.22420.2.2.4.1.37 | ColumnacdSmapIPv4FilterTTL | read-create | current | The TTL used to compare the incoming traffic. Its value ranges from 0 to 255. |
| 1.3.6.1.4.1.22420.2.2.4.1.38 | ColumnacdSmapIPv4FilterIHLEn | read-create | current | Enable or disable the IP Header Length check. |
| 1.3.6.1.4.1.22420.2.2.4.1.39 | ColumnacdSmapIPv4FilterIHL | read-create | current | The IP Header Length used to compare the incoming traffic. Its value ranges from 5 to 15. |
| 1.3.6.1.4.1.22420.2.2.4.1.40 | ColumnacdSmapIPv4FilterIpCosEn | read-create | current | Enable or disable the Ethernet type check. |
| 1.3.6.1.4.1.22420.2.2.4.1.41 | ColumnacdSmapIPv4FilterIpCosMode | read-create | current | VLAN ID operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). |
| 1.3.6.1.4.1.22420.2.2.4.1.42 | ColumnacdSmapIPv4FilterDscp | read-create | current | The DSCP value used to compare the incoming traffic. Its value ranges from 0 to 63. |
| 1.3.6.1.4.1.22420.2.2.4.1.43 | ColumnacdSmapIPv4FilterDscpLast | read-create | current | The DSCP value used to compare the incoming traffic. Its value ranges from 0 to 63. |
| 1.3.6.1.4.1.22420.2.2.4.1.44 | ColumnacdSmapIPv4FilterDscpOper | read-create | current | DSCP operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). |
| 1.3.6.1.4.1.22420.2.2.4.1.45 | ColumnacdSmapIPv4FilterPre | read-create | current | The Precedence value used to compare the incoming traffic. Its value ranges from 0 to 3. |
| 1.3.6.1.4.1.22420.2.2.4.1.46 | ColumnacdSmapIPv4FilterPreLast | read-create | current | The Precedence value used to compare the incoming traffic. Its value ranges from 0 to 3. |
| 1.3.6.1.4.1.22420.2.2.4.1.47 | ColumnacdSmapIPv4FilterPreOper | read-create | current | Precedence operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). |
| 1.3.6.1.4.1.22420.2.2.4.1.48 | ColumnacdSmapIPv4FilterECNEn | read-create | current | Enable or disable the ECN (Explicite Cogestion Notification) check. |
| 1.3.6.1.4.1.22420.2.2.4.1.49 | ColumnacdSmapIPv4FilterECN | read-create | current | The ECN value used to compare the incoming traffic. Its value ranges from 0 to 3. |
| 1.3.6.1.4.1.22420.2.2.4.1.50 | ColumnacdSmapIPv4FilterSrcPortEn | read-create | current | Enable or disable the UDP/TCP Source port check. |
| 1.3.6.1.4.1.22420.2.2.4.1.51 | ColumnacdSmapIPv4FilterSrcPort | read-create | current | The UDP/TCP Source Port used to compare the incoming traffic. Its value ranges from 0 to 65535. |
| 1.3.6.1.4.1.22420.2.2.4.1.52 | ColumnacdSmapIPv4FilterDstPortEn | read-create | current | Enable or disable the UDP/TCP Destination port check. |
| 1.3.6.1.4.1.22420.2.2.4.1.53 | ColumnacdSmapIPv4FilterDstPort | read-create | current | The UDP/TCP Destination Port used to compare the incoming traffic. Its value ranges from 0 to 65535. |
| 1.3.6.1.4.1.22420.2.2.4.1.54 | ColumnacdSmapIPv4FilterIcmpTypeEn | read-create | current | Enable or disable the ICMP type check. |
| 1.3.6.1.4.1.22420.2.2.4.1.55 | ColumnacdSmapIPv4FilterIcmpType | read-create | current | The ICMP type used to compare the incoming traffic. Its value ranges from 0 to 255. |
| 1.3.6.1.4.1.22420.2.2.4.1.56 | ColumnacdSmapIPv4FilterIcmpCodeEn | read-create | current | Enable or disable the ICMP code check. |
| 1.3.6.1.4.1.22420.2.2.4.1.57 | ColumnacdSmapIPv4FilterIcmpCode | read-create | current | The ICMP code used to compare the incoming traffic. Its value ranges from 0 to 255. |
| 1.3.6.1.4.1.22420.2.2.4.1.58 | ColumnacdSmapIPv4FilterSrcPortLast | read-create | current | The UDP/TCP Source Port last value, used in range operation. Its value ranges from 0 to 65535. |
| 1.3.6.1.4.1.22420.2.2.4.1.59 | ColumnacdSmapIPv4FilterSrcPortOper | read-create | current | The UDP/TCP Source Port operator. Valid operator types are: Equal to or Range (inclusive range). |
| 1.3.6.1.4.1.22420.2.2.4.1.60 | ColumnacdSmapIPv4FilterDstPortLast | read-create | current | The UDP/TCP Destination Port last value, used in range operation. Its value ranges from 0 to 65535. |
| 1.3.6.1.4.1.22420.2.2.4.1.61 | ColumnacdSmapIPv4FilterDstPortOper | read-create | current | The UDP/TCP Destination Port operator. Valid operator types are: Equal to or Range (inclusive range). |
| 1.3.6.1.4.1.22420.2.2.5 | NodeacdFilterNotifications | |||
| 1.3.6.1.4.1.22420.2.2.6 | NodeacdFilterMIBObjects | |||
| 1.3.6.1.4.1.22420.2.2.6.1 | NodeacdFilterTableTid | |||
| 1.3.6.1.4.1.22420.2.2.6.1.1 | ScalaracdSmapL2FilterTableLastChangeTid | read-only | current | This is the transaction ID of the last change of the acdSmapL2FilterTable table. If this value is different since the last read this is indicate a table change. |
| 1.3.6.1.4.1.22420.2.2.6.1.2 | ScalaracdSmapIPv4FilterTableLastChangeTid | read-only | current | This is the transaction ID of the last change of the acdSmapIPv4FilterTable table. If this value is different since the last read this is indicate a table chan… |
| 1.3.6.1.4.1.22420.2.2.7 | NodeacdFilterConformance | |||
| 1.3.6.1.4.1.22420.2.2.7.1 | NodeacdFilterCompliances | |||
| 1.3.6.1.4.1.22420.2.2.7.1.1 | ComplianceacdFilterCompliance | current | The compliance statement for support of the ACD-FILTER-MIB module. | |
| 1.3.6.1.4.1.22420.2.2.7.2 | NodeacdFilterGroups | |||
| 1.3.6.1.4.1.22420.2.2.7.2.1 | GroupacdL2FilterGroup | current | Objects for the L2 filter configuration Group. | |
| 1.3.6.1.4.1.22420.2.2.7.2.2 | GroupacdIPv4FilterGroup | current | Objects for the IPv4 filter configuration Group. | |
| 1.3.6.1.4.1.22420.2.2.7.2.3 | GroupacdSmapL2FilterGroup | current | Objects for the SMAP L2 filter configuration Group. | |
| 1.3.6.1.4.1.22420.2.2.7.2.4 | GroupacdSmapIPv4FilterGroup | current | Objects for the SMAP IPv4 filter configuration Group. | |
| 1.3.6.1.4.1.22420.2.2.7.2.5 | GroupacdFilterTidGroup | current | List of scalars to monitior changes in tables. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AcdFilterOperator | INTEGER { lessThan(1), greaterThan(2), equalTo(3), range(4) } | current | Operator for field comparaison. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). |
| AcdFilterOperatorEqualRangeOnly | INTEGER { equalTo(3), range(4) } | current | Operator for field comparaison. Valid operator types are: Equal to or Range (inclusive range). |
| AcdFilterVlanType | INTEGER { cvlan(1), svlan(2), both(3), tvlan(4), any(5) } | current | The type of VLAN to be used. |