ACD-SFP-MIB
101 objects
The SFPs database for this Accedian Networks device.
Imported Objects
| ACCEDIAN-SMI | acdMibs |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.22420.2.4 | IdentityacdSfp | The SFPs database for this Accedian Networks device. | ||
| 1.3.6.1.4.1.22420.2.4.1 | TableacdSfpInfoTable | not-accessible | current | Table of all SFP info |
| 1.3.6.1.4.1.22420.2.4.1.1 | RowacdSfpInfoEntry | not-accessible | current | This is a part of the content of the SFP's 0xA0 EEPROM |
| 1.3.6.1.4.1.22420.2.4.1.1.1 | ColumnacdSfpInfoID | not-accessible | current | Unique value for each SFP. Its value ranges from 1 to MAXINT (4 bytes). |
| 1.3.6.1.4.1.22420.2.4.1.1.2 | ColumnacdSfpInfoConnIdx | read-only | current | This object identifies the connector index on the box. The index is assigned form left to rigth starting with 1. |
| 1.3.6.1.4.1.22420.2.4.1.1.3 | ColumnacdSfpInfoConnType | read-only | current | The connector value indicates the external optical or electrical cable connector provided as the media interface. |
| 1.3.6.1.4.1.22420.2.4.1.1.4 | ColumnacdSfpInfoVendor | read-only | current | The vendor name is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces (20h). The vendor name shall be … |
| 1.3.6.1.4.1.22420.2.4.1.1.5 | ColumnacdSfpInfoVendorOui | read-only | current | The vendor organizationally unique identifier field (vendor OUI) is a 3-byte field that contains the IEEE Company Identifier for the vendor. A value of all zer… |
| 1.3.6.1.4.1.22420.2.4.1.1.6 | ColumnacdSfpInfoVendorPn | read-only | current | The vendor part number (vendor PN) is a 16-byte field that contains ASCII characters, leftaligned and padded on the right with ASCII spaces (20h), defining the… |
| 1.3.6.1.4.1.22420.2.4.1.1.7 | ColumnacdSfpInfoVendorRev | read-only | current | The vendor revision number (vendor rev) is a 4-byte field that contains ASCII characters, leftaligned and padded on the right with ASCII spaces (20h), defining… |
| 1.3.6.1.4.1.22420.2.4.1.1.8 | ColumnacdSfpInfoWavelength | read-only | current | Nominal transmitter output wavelength at room temperature. 16 bit value with byte 60 as high order byte and byte 61 as low order byte. The laser wavelength is … |
| 1.3.6.1.4.1.22420.2.4.1.1.9 | ColumnacdSfpInfoSerialNum | read-only | current | The vendor serial number (vendor SN) is a 16 character field that contains ASCII characters, left-aligned and padded on the right with ASCII spaces (20h), defi… |
| 1.3.6.1.4.1.22420.2.4.1.1.10 | ColumnacdSfpInfoYear | read-only | current | This is the year of manufacturing. |
| 1.3.6.1.4.1.22420.2.4.1.1.11 | ColumnacdSfpInfoMonth | read-only | current | This is the month of manufacturing. |
| 1.3.6.1.4.1.22420.2.4.1.1.12 | ColumnacdSfpInfoDay | read-only | current | This is the day of manufacturing. |
| 1.3.6.1.4.1.22420.2.4.1.1.13 | ColumnacdSfpInfoLot | read-only | current | This is the Lot number of manufacturing. |
| 1.3.6.1.4.1.22420.2.4.1.1.14 | ColumnacdSfpInfoRev8472 | read-only | current | This is to indicate to which revision this SFP is compatible. |
| 1.3.6.1.4.1.22420.2.4.1.1.15 | ColumnacdSfpInfoPresent | read-only | current | This is to indicate if the SFP is present or not. |
| 1.3.6.1.4.1.22420.2.4.1.1.16 | ColumnacdSfpInfoDiag | read-only | current | This is to indicate if the SFP supports Digital Diagnostics. |
| 1.3.6.1.4.1.22420.2.4.1.1.17 | ColumnacdSfpInfoInternal | read-only | current | This is to indicate if the SFP supports internal calibration. If externally calibrated, the measurements are raw A/D values and must be converted to real world… |
| 1.3.6.1.4.1.22420.2.4.1.1.18 | ColumnacdSfpInfoAlm | read-only | current | This is to indicate if the SFP supports Alarm and warning thresholds for the Digital Diagnostics. |
| 1.3.6.1.4.1.22420.2.4.1.1.19 | ColumnacdSfpInfoIdType | read-only | current | The identifier value specifies the physical device described by the two-wire interface information. This value shall be included in the two-wire interface data… |
| 1.3.6.1.4.1.22420.2.4.1.1.20 | ColumnacdSfpInfoExtIdType | read-only | current | The extended identifier value provides additional information about the transceiver. The field should be set to 04h for all SFP modules indicating two-wire int… |
| 1.3.6.1.4.1.22420.2.4.1.1.21 | ColumnacdSfpInfoTransCode | read-only | current | The following bit significant indicators define the electronic or optical interfaces that are supported by the transceiver. At least one bit shall be set in th… |
| 1.3.6.1.4.1.22420.2.4.2 | TableacdSfpDiagTable | not-accessible | current | Table of all SFP Digital Diagnostics |
| 1.3.6.1.4.1.22420.2.4.2.1 | RowacdSfpDiagEntry | not-accessible | current | This is a part the content of the SFP's 0xA0 EEPROM |
| 1.3.6.1.4.1.22420.2.4.2.1.1 | ColumnacdSfpDiagID | not-accessible | current | Unique value for each SFP. Its value ranges from 1 to MAXINT (4 bytes). |
| 1.3.6.1.4.1.22420.2.4.2.1.2 | ColumnacdSfpDiagConnIdx | read-only | current | This object identifies the connector index on the box. The index is assigned form left to rigth starting with 1. |
| 1.3.6.1.4.1.22420.2.4.2.1.3 | ColumnacdSfpDiagTemp | read-only | current | Internally measured transceiver temperature. Represented as a 16 bit signed twos complement value in degrees Celsius, yielding a total range of -128C to +128C. |
| 1.3.6.1.4.1.22420.2.4.2.1.4 | ColumnacdSfpDiagVcc | read-only | current | Internally measured transceiver supply voltage. Represented as a 16 bit unsigned integer with the voltage defined as the full 16 bit value (0 to 65535) with LS… |
| 1.3.6.1.4.1.22420.2.4.2.1.5 | ColumnacdSfpDiagLbc | read-only | current | Measured TX bias current in micro-Amps yielding a total range of 0 to 131 mA. |
| 1.3.6.1.4.1.22420.2.4.2.1.6 | ColumnacdSfpDiagTxPwr | read-only | current | Measured TX output power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 mic… |
| 1.3.6.1.4.1.22420.2.4.2.1.7 | ColumnacdSfpDiagRxPwr | read-only | current | Measured Rx input power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 micr… |
| 1.3.6.1.4.1.22420.2.4.2.1.8 | ColumnacdSfpDiagTxPwrdBm | read-only | current | Measured TX output power in dBm (~ -40 to +8.2 dBm). |
| 1.3.6.1.4.1.22420.2.4.2.1.9 | ColumnacdSfpDiagRxPwrdBm | read-only | current | Measured Rx input power in dBm (~ -40 to +8.2 dBm). |
| 1.3.6.1.4.1.22420.2.4.3 | TableacdSfpThreshTable | not-accessible | current | Table of all SFP Alarm and Warning Thresholds |
| 1.3.6.1.4.1.22420.2.4.3.1 | RowacdSfpThreshEntry | not-accessible | current | This is a part the content of the SFP's 0xA0 EEPROM |
| 1.3.6.1.4.1.22420.2.4.3.1.1 | ColumnacdSfpThreshID | not-accessible | current | Unique value for each SFP. Its value ranges from 1 to MAXINT (4 bytes). |
| 1.3.6.1.4.1.22420.2.4.3.1.2 | ColumnacdSfpThreshConnIdx | read-only | current | This object identifies the connector index on the box. The index is assigned form left to rigth starting with 1. |
| 1.3.6.1.4.1.22420.2.4.3.1.3 | ColumnacdSfpThreshTempHighAlm | read-only | current | High Alarm transceiver temperature. Represented as a 16 bit signed twos complement value in degrees Celsius, yielding a total range of -128C to +128C. |
| 1.3.6.1.4.1.22420.2.4.3.1.4 | ColumnacdSfpThreshTempLowAlm | read-only | current | Low Alarm transceiver temperature. Represented as a 16 bit signed twos complement value in degrees Celsius, yielding a total range of -128C to +128C. |
| 1.3.6.1.4.1.22420.2.4.3.1.5 | ColumnacdSfpThreshTempHighWarn | read-only | current | High Warning transceiver temperature. Represented as a 16 bit signed twos complement value in degrees Celsius, yielding a total range of -128C to +128C. |
| 1.3.6.1.4.1.22420.2.4.3.1.6 | ColumnacdSfpThreshTempLowWarn | read-only | current | Low Warning transceiver temperature. Represented as a 16 bit signed twos complement value in degrees Celsius, yielding a total range of -128C to +128C. |
| 1.3.6.1.4.1.22420.2.4.3.1.7 | ColumnacdSfpThreshVccHighAlm | read-only | current | High Alarm transceiver supply voltage. Represented as a 16 bit unsigned integer with the voltage defined as the full 16 bit value (0 to 65535) with LSB equal t… |
| 1.3.6.1.4.1.22420.2.4.3.1.8 | ColumnacdSfpThreshVccLowAlm | read-only | current | Low Alarm transceiver supply voltage. Represented as a 16 bit unsigned integer with the voltage defined as the full 16 bit value (0 to 65535) with LSB equal to… |
| 1.3.6.1.4.1.22420.2.4.3.1.9 | ColumnacdSfpThreshVccHighWarn | read-only | current | High Warning transceiver supply voltage. Represented as a 16 bit unsigned integer with the voltage defined as the full 16 bit value (0 to 65535) with LSB equal… |
| 1.3.6.1.4.1.22420.2.4.3.1.10 | ColumnacdSfpThreshVccLowWarn | read-only | current | Low Warning transceiver supply voltage. Represented as a 16 bit unsigned integer with the voltage defined as the full 16 bit value (0 to 65535) with LSB equal … |
| 1.3.6.1.4.1.22420.2.4.3.1.11 | ColumnacdSfpThreshLbcHighAlm | read-only | current | High Alarm TX bias current in micro-Amps yielding a total range of 0 to 131 mA. |
| 1.3.6.1.4.1.22420.2.4.3.1.12 | ColumnacdSfpThreshLbcLowAlm | read-only | current | Low Alarm TX bias current in micro-Amps yielding a total range of 0 to 131 mA. |
| 1.3.6.1.4.1.22420.2.4.3.1.13 | ColumnacdSfpThreshLbcHighWarn | read-only | current | High Warning TX bias current in micro-Amps yielding a total range of 0 to 131 mA. |
| 1.3.6.1.4.1.22420.2.4.3.1.14 | ColumnacdSfpThreshLbcLowWarn | read-only | current | Low Warning TX bias current in micro-Amps yielding a total range of 0 to 131 mA. |
| 1.3.6.1.4.1.22420.2.4.3.1.15 | ColumnacdSfpThreshTxPwrHighAlm | read-only | current | High Alarm TX output power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 m… |
| 1.3.6.1.4.1.22420.2.4.3.1.16 | ColumnacdSfpThreshTxPwrLowAlm | read-only | current | Low Alarm TX output power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 mi… |
| 1.3.6.1.4.1.22420.2.4.3.1.17 | ColumnacdSfpThreshTxPwrHighWarn | read-only | current | High Warning TX output power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1… |
| 1.3.6.1.4.1.22420.2.4.3.1.18 | ColumnacdSfpThreshTxPwrLowWarn | read-only | current | Low Warning TX output power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 … |
| 1.3.6.1.4.1.22420.2.4.3.1.19 | ColumnacdSfpThreshRxPwrHighAlm | read-only | current | High Alarm RX input power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 mi… |
| 1.3.6.1.4.1.22420.2.4.3.1.20 | ColumnacdSfpThreshRxPwrLowAlm | read-only | current | Low Alarm RX input power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 mic… |
| 1.3.6.1.4.1.22420.2.4.3.1.21 | ColumnacdSfpThreshRxPwrHighWarn | read-only | current | High Warning RX input power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 … |
| 1.3.6.1.4.1.22420.2.4.3.1.22 | ColumnacdSfpThreshRxPwrLowWarn | read-only | current | Low Warning RX input power in mW. Represented as a 16 bit unsigned integer with the power defined as the full 16 bit value (0 to 65535) with LSB equal to 0.1 m… |
| 1.3.6.1.4.1.22420.2.4.3.1.23 | ColumnacdSfpThreshTxPwrHighAlmdBm | read-only | current | High Alarm TX output power in dBm (~ -40 to +8.2 dBm). |
| 1.3.6.1.4.1.22420.2.4.3.1.24 | ColumnacdSfpThreshTxPwrLowAlmdBm | read-only | current | Low Alarm TX output power in dBm (~ -40 to +8.2 dBm). |
| 1.3.6.1.4.1.22420.2.4.3.1.25 | ColumnacdSfpThreshTxPwrHighWarndBm | read-only | current | High Warning TX output power in dBm (~ -40 to +8.2 dBm). |
| 1.3.6.1.4.1.22420.2.4.3.1.26 | ColumnacdSfpThreshTxPwrLowWarndBm | read-only | current | Low Warning TX output power in dBm (~ -40 to +8.2 dBm). |
| 1.3.6.1.4.1.22420.2.4.3.1.27 | ColumnacdSfpThreshRxPwrHighAlmdBm | read-only | current | High Alarm Rx input power in dBm (~ -40 to +8.2 dBm). |
| 1.3.6.1.4.1.22420.2.4.3.1.28 | ColumnacdSfpThreshRxPwrLowAlmdBm | read-only | current | Low Alarm Rx input power in dBm (~ -40 to +8.2 dBm). |
| 1.3.6.1.4.1.22420.2.4.3.1.29 | ColumnacdSfpThreshRxPwrHighWarndBm | read-only | current | High Warning Rx input power in dBm (~ -40 to +8.2 dBm). |
| 1.3.6.1.4.1.22420.2.4.3.1.30 | ColumnacdSfpThreshRxPwrLowWarndBm | read-only | current | Low Warning Rx input power in dBm (~ -40 to +8.2 dBm). |
| 1.3.6.1.4.1.22420.2.4.4 | TableacdSfpThreshStatusTable | not-accessible | current | Table of all SFP Digital Diagnostics Thresholds statuses |
| 1.3.6.1.4.1.22420.2.4.4.1 | RowacdSfpThreshStatusEntry | not-accessible | current | This is a part the content of the SFP's 0xA2 EEPROM |
| 1.3.6.1.4.1.22420.2.4.4.1.1 | ColumnacdSfpThreshStatusID | not-accessible | current | Unique value for each SFP. Its value ranges from 1 to MAXINT (4 bytes). |
| 1.3.6.1.4.1.22420.2.4.4.1.2 | ColumnacdSfpThreshStatusConnIdx | read-only | current | This object identifies the connector index on the box. The index is assigned form left to rigth starting with 1. |
| 1.3.6.1.4.1.22420.2.4.4.1.3 | ColumnacdSfpThreshStatusTempHighAlm | read-only | current | This is to indicate if the temperature reaches or overpasses the High alarm threshold. |
| 1.3.6.1.4.1.22420.2.4.4.1.4 | ColumnacdSfpThreshStatusTempLowAlm | read-only | current | This is to indicate if the temperature reaches or underpasses the Low alarm threshold. |
| 1.3.6.1.4.1.22420.2.4.4.1.5 | ColumnacdSfpThreshStatusTempHighWarn | read-only | current | This is to indicate if the temperature reaches or overpasses the High warning threshold. |
| 1.3.6.1.4.1.22420.2.4.4.1.6 | ColumnacdSfpThreshStatusTempLowWarn | read-only | current | This is to indicate if the temperature reaches or underpasses the Low warning threshold. |
| 1.3.6.1.4.1.22420.2.4.4.1.7 | ColumnacdSfpThreshStatusVccHighAlm | read-only | current | This is to indicate if the supply voltage reaches or overpasses the High alarm threshold. |
| 1.3.6.1.4.1.22420.2.4.4.1.8 | ColumnacdSfpThreshStatusVccLowAlm | read-only | current | This is to indicate if the supply voltage reaches or underpasses the Low alarm threshold. |
| 1.3.6.1.4.1.22420.2.4.4.1.9 | ColumnacdSfpThreshStatusVccHighWarn | read-only | current | This is to indicate if the supply voltage reaches or overpasses the High warning threshold. |
| 1.3.6.1.4.1.22420.2.4.4.1.10 | ColumnacdSfpThreshStatusVccLowWarn | read-only | current | This is to indicate if the supply voltage reaches or underpasses the Low warning threshold. |
| 1.3.6.1.4.1.22420.2.4.4.1.11 | ColumnacdSfpThreshStatusLbcHighAlm | read-only | current | This is to indicate if the Laser Bias Current reaches or overpasses the High alarm threshold. |
| 1.3.6.1.4.1.22420.2.4.4.1.12 | ColumnacdSfpThreshStatusLbcLowAlm | read-only | current | This is to indicate if the Laser Bias Current reaches or underpasses the Low alarm threshold. |
| 1.3.6.1.4.1.22420.2.4.4.1.13 | ColumnacdSfpThreshStatusLbcHighWarn | read-only | current | This is to indicate if the Laser Bias Current reaches or overpasses the High warning threshold. |
| 1.3.6.1.4.1.22420.2.4.4.1.14 | ColumnacdSfpThreshStatusLbcLowWarn | read-only | current | This is to indicate if the Laser Bias Current reaches or underpasses the Low warning threshold. |
| 1.3.6.1.4.1.22420.2.4.4.1.15 | ColumnacdSfpThreshStatusTxPwrHighAlm | read-only | current | This is to indicate if the Transmit Power reaches or overpasses the High alarm threshold. |
| 1.3.6.1.4.1.22420.2.4.4.1.16 | ColumnacdSfpThreshStatusTxPwrLowAlm | read-only | current | This is to indicate if the Transmit Power reaches or underpasses the Low alarm threshold. |
| 1.3.6.1.4.1.22420.2.4.4.1.17 | ColumnacdSfpThreshStatusTxPwrHighWarn | read-only | current | This is to indicate if the Transmit Power reaches or overpasses the High warning threshold. |
| 1.3.6.1.4.1.22420.2.4.4.1.18 | ColumnacdSfpThreshStatusTxPwrLowWarn | read-only | current | This is to indicate if the Transmit Power reaches or underpasses the Low warning threshold. |
| 1.3.6.1.4.1.22420.2.4.4.1.19 | ColumnacdSfpThreshStatusRxPwrHighAlm | read-only | current | This is to indicate if the Receive Power reaches or overpasses the High alarm threshold. |
| 1.3.6.1.4.1.22420.2.4.4.1.20 | ColumnacdSfpThreshStatusRxPwrLowAlm | read-only | current | This is to indicate if the Receive Power reaches or underpasses the Low alarm threshold. |
| 1.3.6.1.4.1.22420.2.4.4.1.21 | ColumnacdSfpThreshStatusRxPwrHighWarn | read-only | current | This is to indicate if the Receive Power reaches or overpasses the High warning threshold. |
| 1.3.6.1.4.1.22420.2.4.4.1.22 | ColumnacdSfpThreshStatusRxPwrLowWarn | read-only | current | This is to indicate if the Receive Power reaches or underpasses the Low warning threshold. |
| 1.3.6.1.4.1.22420.2.4.5 | NodeacdSfpNotifications | |||
| 1.3.6.1.4.1.22420.2.4.6 | NodeacdSfpMIBObjects | |||
| 1.3.6.1.4.1.22420.2.4.7 | NodeacdSfpConformance | |||
| 1.3.6.1.4.1.22420.2.4.7.1 | NodeacdSfpCompliances | |||
| 1.3.6.1.4.1.22420.2.4.7.1.1 | ComplianceacdSfpCompliance | current | The compliance statement for support of the ACD-SFP-MIB module. | |
| 1.3.6.1.4.1.22420.2.4.7.2 | NodeacdSfpGroups | |||
| 1.3.6.1.4.1.22420.2.4.7.2.1 | GroupacdSfpInfoGroup | current | Objects for the SFP information Group. | |
| 1.3.6.1.4.1.22420.2.4.7.2.2 | GroupacdSfpDiagGroup | current | Objects for the SFP diagnostics Group. | |
| 1.3.6.1.4.1.22420.2.4.7.2.3 | GroupacdSfpThreshGroup | current | Objects for the SFP thresholds Group. | |
| 1.3.6.1.4.1.22420.2.4.7.2.4 | GroupacdSfpThreshStatusGroup | current | Objects for the SFP threshold status Group. |